KONKAN RAILWAY CORPORATION LIMITED MATERIALS MANAGEMENT DEPARTMENT

Similar documents
Parts Checklist: XJ Front 3-Link Long Arm Upgrade Installation Instructions *BOX 1* *BOX 2* Jeep Cherokee XJ

Parts Checklist: ZJ Front 3-Link Long Arm Upgrade Installation Instructions *BOX 1* *BOX 2* Jeep Grand Cherokee ZJ

XJ 4-Link Rear Long Arm Instructions

Parts Checklist: WJ Front 3-Link Long Arm Upgrade Installation Instructions *BOX 1* (1) *BOX 2* (1) Jeep Grand Cherokee WJ

03-06 TJ Long Arm Upgrade Instructions

SMARTQUOTE 2.0 RELEASE NOTES


2011 Cat Hand Tools and Shop Supplies

XJ 4 Rock-Link Long Arm Lift Kit Instructions XJ Jeep Cherokee

XJ 4 Rock-Link Long Arm Lift Kit Instructions XJ Jeep Cherokee

A* CHAIN HOOKS, 1/4" EA A* CHAIN HOOKS, 5/16" EA A* BELT, SANDER 120 GRIT EA 3" X 24" A* BELT, SANDER 120

ANNEX A Descriptions and Photos

Backdrive Installation, Set-up & Faults new standard.

ROSBACK PRINTERS AND BOOKBINDER S MACHINERY Quality Bindery Equipment Since 1881

TJ Long Arm Lift Kit Instructions

WJ 6.5 Critical Path Lift Kit Installation Instructions

SCION FR-S CENTER ARMREST Preparation

1.1/2" - Air Impact Wrench (Twin Hammer) 1" - Air Impact Wrench (Twin Hammer) 1" - Air Impact Wrench (Twin Hammer)

Mini H1 Twin Kit - Installation Instructions

ANNEXURE-I : LIST OF ITEMS H.O. PURCHASE ITEM LIST:

V ~ 50 Hz / 250 W 220 mm 1.2 mm / 600 cm Twin line cutting Plastics. '!0A68CF-gbggjj! +/ pc. '!0A68CF-fjibhj!

INSTALLATION INSTRUCTIONS For 65800, 65801, 66355, 69250, Rear Bumper And Tire Carrier For Jeep XJ Cherokee

Preparation Part Number: PT Kit Contents Item # Quantity Reqd. Description 1 1 Rear Spoiler 2 1 Hardware Kit. Hardware Bag Contents

BROWN BROWN. May 2018


SICO 1800 Single & Dual-Height Stage System A single or dual-height mobile folding stage with carpet or hard tuff-deck surface.

REMOTE GREASING KIT FOR MORGANS SERIES 2

Production began OCTOBER 6, 2000

A very common arrangement for oil lubricated stern tube bearings. A simplex seal arrangement is fitted to both inner and outer ends.

2011 Cadillac CTS Coupe EGX Exhaust Tip & Rear Valance Mesh Accent Kit Part #: Complete E

Replace front brake pads and discs * (Ford Galaxy )

Unit: (For 63 students) ALL TOOLS & Machineries are made of high quality with prescribed specification of Govt of India DGE&T and QCI.

BULLBAR Fitting instructions to fit TUFF Range Bullbars (2-5 Post and Aerostyle) to TOYOTA FORTUNER

PSS INSTALLATION INSTRUCTIONS

PROJE CT-BASED LEARNING: ABS PLASTIC DERBY

DINAK DWhp 0036 CPD APPLICATIONS MAIN FEATURES MATERIALS AVAILABLE DIAMETERS

10. Lower Fuselage Assembly Undercarriage

Spares Suitable for Heidelberg S Series Machines

Phone:

MT07 MT03 MHS100AG MEASURING TAPE & HACKSAW MEASURING TAPE & HACKSAW MEASURING TAPES MEASURING TAPES HEAVY DUTY DELUXE TYPE HACKSAW W/12" H.S.S.

METHOD OF PERMANENT WAY INSPECTION AND MAINTENANCE PRACTICES 0F RAIL TRACK

/2017. Flexline rapid clamping systems with drive chain clamping element, T-slot and adjustment track

MANUAL TRANSAXLE SECTIONMT CONTENTS IDX. Shift Control Components...34

Roush Side Rocker Panel Splitters (10-13 All)

CAPTIVE POWER PLANT NALCO, ANGUL

TOYOTA HIGHLANDER RUNNING BOARD HIGHLANDER HV Preparation

INSTALLATION INSTRUCTIONS

WJ 6.5 Premium Long Arm Kit Installation Instructions

Parts Manual. with Wiring Diagrams for domestic and standard export ovens PS570G SERIES GAS FIRED: Table of Contents: Page 2.

ILLUSTRATED PARTS LISTING EUROPEAN CE POLYHAWK SPREADERS

Appointment Plus User Instructions

72 Mustang Mach 1 tachometer cluster and gauge conversion

D-Sub adaptor Cable clamps for metric cable entries Cable clamps for PG cable entries Further Accessories

MECHANICAL IEEE PROJECT TITLES 2015 LeMeniz Infotech

99.95 Kit Kit. Call to order: 4:1 Clear Coat 1 Gallon with Activator Medium or Fast $ Kit

Cordless Tools Lithium-ion Technology

Urethane Grade Reducer

Rejuvenation Instructions

MOBILE MIXERS PARTS MANUAL 900SD TRUCK, TRAILER, STATIONARY

10/31/2018 R.M. 2005::Drive Shaft / Propeller Shaft: Front Drive Shaft: Overhaul (SCION xb) 2005 Scion XB MotoLogic

LT-F Compact Treaded All Terrain Surveillance & Inspection Robot

Fabrication of Mini Air Cooler Electrical Power Generation From Thermal Power Plant

GUIDELINE (ROLLER SHADE) COMPONENTS APRIL 2018

Major Components Oil Breather Snubber Assembly Drive Sheave Variable Speed Sheave Belt Tensioner Assembly...

EZ ROLL (ROLLER SHADE) COMPONENTS APRIL 2018

INSTALLATION INSTRUCTIONS

Tips & Technology For Bosch business partners

Audi 8L A3 and B5 A4 ColorMFA Install Guide ColorMFA from AutoPilot. Instructions from Clusters by Litke and pinout from Drive2

C-10 Rear 4Link

BIOMASS WOOD BRIQUETTES PLANT PILOT PROJECT IN LEBANON. By Jean Paul SFEIR SOLARNET General Manager November

WARNING. it means the information that follows will help avoid damage to the steering gear.

When installed in accordance with these instructions, the front protection bar does not affect operation of the SRS airbag.

PHONE:

BULLBAR Fitting instructions to fit TUFF Range Bullbars (2-3 Post, and Aerostyle) to NISSAN NP300 NAVARA

The Effects of Track Stability on Point Systems; Page One

$1.00 FOR THE TQIO/RCIO

GM C10 Street Grip

FITTING KIT No s : BULL BAR WINCH ( P/No ) BULL BAR NON WINCH ( P/No )

Circle Track Merchandising Display

High-performance products. Designed for you!

Weld Shears. Control Valve Models

ALLTRADE & POWERBUILT NEW PRODUCT (SOME SHELF LIFT ITEMS)

Construction Site Thefts Report. Lancashire

NTPC Material Description

Spare parts list. Petrol breakers CP Drill.

Screw jacks with travelling ball nut (Mod.B)

DIY (Personal Use Only)

Quality tools at affordable prices

GARLAND MODEL 680 s CANADIAN MODEL

Safety 14 ga. Welded Plastic Bin Security Fire Resistant Gas Cylinder

Tools Online Retailer Returns - TRACY - February 16

CS24/25 SERIES CLUTCH SHIFT PTO

EZ-MATIC SHADE COMPONENTS

Part Number: TAV-713 TOYOTA AVALON LED DRL

...components in motion. Curviline Rail

Installation Instructions Models 2858, 2858A-1, 2858GL February 2009

Q U O T A T I O N REV.0 Stick-Pack MS18 6 lanes CUSTOMER: PRODUCT SPECIFICATIONS:

INSTALLATION INSTRUCTIONS

BM141SY FITTING INSTRUCTIONS

ELECTRIC POWER TOOLS SIM180

Transcription:

P.Way Material requirement fr maintenance year 2012-13 PL N. Descriptin f Item Unit Quantity RN KW Ttal A) Lng Lead Items 1 60017003 Rails 52Kg 90 UTS (Fr MT 2500 0 2500.00 1439.72 Sabarmati FBP) 2 60017003 Rails 52Kg 90 UTS MT 724 697 1421.00 818.33 3 60097008 1 in 12 Thick Web Switches sets 5 3 8.00 56.18 4 60097007 1 in 12 O.R. Switches sets 2 0 2.00 2.51 5 60097011 1 in 8.5 O.R. Switches sets 4 3 7.00 5.64 6 60097006 Derailing Switches sets 3 3 6.00 2.93 7 60087003 CMS Xing fr 1 in 12 T/Out sets 48 48 96.00 210.61 8 60087002 CMS Xing fr 1 in 8.5 T/Out sets 7 6 13.00 23.84 9 60197039 Check Rail ns 6 6 12.00 0.32 10 60217063 Imprved Straight SEJ sets 15 10 25.00 29.47 11 Imprved Curved SEJ 0.00 60217085 a) 0 T 1 Degree sets 5 5 10.00 11.93 60217086 b) 1 T 2 Degree sets 5 5 10.00 11.93 12 60017001 Glued Insulated Rail Jints ns 65 55 120.00 10.97 G3L Type 13 60067016 PSC Sleeper set fr 1 in 12 sets 5 0 5.00 17.75 TWS 14 60067028 Individual PSC Sleeper fr RMT 60 60 120.00 1.30 turnuts 1 in 12 and 1 in 8.5 turnuts 15 60067026 PSC Sleepers fr SEJ sets 30 20 50.00 7.72 16 60217036 Rubber Pad RT - 3703 ns 100000 100000 200000.00 50.80 17 60197037 Rubber Pad set fr 1 in 12 sets 50 50 100.00 23.73 T/Out 18 60197038 Rubber Pad set fr 1 in 8.5 sets 10 10 20.00 3.22 T/Out 19 60197056 Rubber Pad set fr Derailing sets 5 5 10.00 0.71 switch 20 60217028 Rubber Pad f BR Guard ns 5000 20000 25000.00 6.72 Rail T-4107 21 60217031 MS Prtecting plate T-4098 ns 0 800 800.00 0.67 fr guard rail 22 60217001 SEJ Rubber Plate (T-4159) ns 1500 400 1900.00 2.75 Ttal 2739.75

P.Way Material requirement fr maintenance year 2012-13 PL N. Descriptin f Item Unit Quantity RN KW Ttal B) P.Way Fittings 1 60217011 ERC Clips T-3701 ns 130000 140000 270000.00 139.24 2 60217009 Antitheft ERC clips ns 6500 5000 11500.00 9.29 3 60217010 J' Type ERC ns 2000 6000 8000.00 36.75 4 60197018 Insulating liners T-3708 ns 2000 0 2000.00 0.300 5 60197017 Insulating liners T-3707 ns 2000 0 2000.00 0.28 6 60217037 GFN liner T-3702 ns 50000 38000 88000.00 8.92 7 60217003 Jggled fish plate (52kg), ns 2000 2000 4000.00 42.88 8 60217002 C Clamps ns 2000 2000 4000.00 18.77 9 60217030 Metal liners T-3738 ns 0 330000 330000.00 76.82 10 60217089 Cmbinatin Metal liner - t set 5000 5000 10000.00 6.10 T-3741 & T-3742 11 60197072 Distance piece with blt fr set 14 30 44.00 1.68 SLP N.14 t 18 as per Drg. N.4733 12 60217068 1 in 12 pints & xing blt set ns 80 50 130.00 5.80 13 60217025 Check rail blt T-11513 (25 x ns 330 500 830.00 0.57 180) 14 60197041 Plate Screw -3913 ns 0 7000 7000.00 2.72 15 60197053 Plate Screw -3912 (1 in 81/2) ns 400 0 400.00 0.15 16 60217026 Fish plate blts T-11501 ns 5000 3600 8600.00 5.43 17 60197029 Packing Piece T-26 c ns 120 150 270.00 0.064 18 60217027 Rail Screw T-4153 ns 16000 29000 45000.00 14.89 19 60217033 BLT C-Clamp ns 120 0 120.00 1.07 20 60177001 Leaf spring T-3673C/3 ns 450 1650 2100.00 3.90 21 60177002 Key fr slide chair ns 450 1500 1950.00 3.03 22 60197012 K- Clip with nut blt 3754C/2 ns 420 4500 4920.00 10.76 23 60197025 T-Headed Blts 3754C/1 ns 740 2100 2840.00 1.69 24 60177003 Spherical washer T-023 ns 500 3100 3600.00 1.91 25 60177004 Single Spring Washer RDSO ns 2150 0 2150.00 0.12 (T-10773) 26 60197034 Duble Spring Washer ns 850 0 850.00 0.11 RDSO (T-1214) 27 60217082 1 MTR Fish Plate with Hle pairs 500 400 900.00 25.32 T-5915 28 93217003 PF Distance Pieces ns 120 120 240.00 2.59 29 80037001 Graphite Grease Tnne 45 30 75.00 73.53 30 60197004 SOD fr 1 In 12 T/Out ns 50 50 100.00 45.80 31 60217004 SEJ Blt RDSO T-2659 (Fr ns 150 150 300.00 0.12 120MM GAP) 32 60217005 SEJ Blt RDSO T-2660 (Fr 120MM GAP) ns 150 150 300.00 0.13

P.Way Material requirement fr maintenance year 2012-13 PL N. Descriptin f Item Unit Quantity RN KW Ttal 33 60217040 Distance Bracket fr LC gate ns 100 100 200.00 1.02 as per Drg.N.4785 34 60197074 Leading stretcher bar fr 1 in ns 8 8 16.00 0.56 12 T/ut O.R. switch 35 60197075 Ist fllwing stretcher bar fr ns 8 8 16.00 0.56 1 in 12 T/ut O.R. switch 36 60197076 2nd fllwing stretcher bar ns 8 8 16.00 0.56 fr 1 in 12 T/ut O.R. switch 37 60197077 3rd fllwing stretcher bar fr ns 8 8 16.00 0.56 1 in 12 T/ut O.R. switch 38 60187014 Slide chair 3717/C/1 ns 160 108 268.00 8.58 (LH-80, RH-80) (LH-54, RH-54) 39 60187015 Slide chair 3717/C/2 ns 40 66 106.00 3.39 (LH-33, RH-33) 40 60187016 Slide chair 3717/C/3 ns 24 68 92.00 2.94 (LH-12, RH-12) (LH-34, RH-34) 41 60187017 Slide chair 3717/C/4 ns 40 68 108.00 3.46 (LH-34, RH-34) 42 60187018 Slide chair 3717/C/5 ns 40 66 106.00 3.39 (LH-33, RH-33) 43 60187019 Slide chair 3717/C/AR ns 40 78 118.00 3.78 (LH-39, RH-39) 44 60187035 Spl. Bearing plate 3720/C t set 40 76 116.00 26.30 3725/C (Ttal - 6 ns per set) (LH-38, RH-38) 45 60187036 Spl. Bearing plate 3725/C/1 ns 44 76 120.00 24.78 t 3725/C/6 (Ttal - 6 ns per set) (LH-22, RH-22) (LH-38, RH-38) Distance Blck fr 1 in 12 TWB 46 60177009 T-4762 ns 86 80 166.00 1.25 RN-(LH-43, RH-43) MAO-(LH-40, RH-40) 47 60217089 Blt -T-11531 ns 104 110 214.00 0.29

P.Way Material requirement fr maintenance year 2012-13 PL N. Descriptin f Item Unit Quantity RN KW Ttal 48 60177010 T-4763 ns 54 80 134.00 1.09 RN-(LH-44, RH-10) MAO-(LH-40, RH-40) 49 60217090 Blt -T-11533 ns 62 110 172.00 0.25 Ttal 623.494

P.Way Material requirement fr maintenance year 2012-13 PL N. Descriptin f Item Unit Quantity RN KW Ttal C) Welding Materials 1 76217001 SKV Welding Prtin 25 MM ns 385 800 1185.00 20.45 2 76217002 Dry muld ns 575 1000 1575.00 2.29 3 76217025 Burner Nipple ns 32 16 48.00 0.04 4 76217003 Crucible ns 20 7 27.00 0.67 5 76217019 Crucible Charger ns 58 26 84.00 0.76 6 76217017 Crusible stand vapriser ns 21 10 31.00 0.19 with pipe 7 76217004 Petrl Tank ns 7 5 12.00 0.60 8 65987002 Muld She ns 42 15 57.00 0.51 9 76217026 Sdium Silicate ns 700 210 910.00 0.32 10 76217044 Luting sand bag 0 200 200.00 5.49 11 76217027 Chisel fr weld chipping ns 28 18 46.00 1.73 12 76217032 Tmmy bar ns 17 19 36.00 0.05 13 76217033 Bend pipe ns 19 12 31.00 0.08 14 76217028 Stp watch ns 7 7 14.00 0.04 15 76217029 Filler gauge ns 6 6 12.00 0.008 16 76217030 Gap Gauge ns 5 5 10.00 0.007 17 76217031 Height Gauge ns 4 3 7.00 0.005 18 70017001 Grinding wheel ns 390 325 715.00 0.55 19 70067001 Partner Cutting Disc ns 960 800 1760.00 7.66 20 60261003 Rail Drill Bit 28MM Dia ns 10 10 20.00 0.35 21 60261001 Rail Drill Bit 32MM Dia ns 10 10 20.00 0.55 22 75987002 Safety Ggle ns 55 52 107.00 0.05 23 75010080 Safety Belt ns 22 25 47.00 0.18 24 75407044 Big Umbrella fr RMV ns 11 7 18.00 0.21 25 75327004 Hand glws asbests ns 105 54 159.00 0.06 26 75987003 Biler suit ns 21 30 51.00 2.20 Ttal 45.05

P.Way Material requirement fr maintenance year 2012-13 PL N. Descriptin f Item Unit Quantity RN KW Ttal D) Equipment 1 60267008 Simplex Jack 15T ns 13 13 26.00 1.67 2 72167021 Level Tube ns 39 24 63.00 0.18 3 72167008 Gauge Cum Level ns 32 20 52.00 0.98 4 72167010 Versine Kit ns 18 21 39.00 0.24 5 72167005 Rail Thermmeter ns 40 36 76.00 0.54 6 75407040 W/L Bard ns 5 0 5.00 0.15 7 75407041 W Bard ns 0 4 4.00 0.06 8 75407042 C/T Bard ns 5 17 22.00 0.79 9 75407043 W/T Bard ns 0 30 30.00 0.48 10 75407014 Cautin Order Bard sets 29 30 59.00 9.56 11 77117001 Black Bitumineus Paint litres 4610 300 4910.00 3.48 12 77037003 Yellw Oil Paint litres 330 245 575.00 0.73 13 77077002 Red Oxide litres 4770 710 5480.00 7.38 14 65907011 Grass Cutting Machine ns 4 4 8.00 1.76 15 60267300 Champering Kit (IRPWM ns 5 0 5.00 0.35 Para-251-b) 16 80037009 Darada Grease kg 15 10 25.00 0.56 17 60267016 Rck Drill Bit 38 x 450 ns 10 4 14.00 1.00 18 60268000 Rck Drill Bit 40 x 800 ns 6 4 10.00 1.17 19 72117003 Rugh files with Handle ns 10 12 22.00 0.022 20 72017011 High Speed Hacksaw blade ns 15 65 80.00 0.02 21 72127003 Hammer 10 Pund ns 11 65 76.00 0.16 22 72127006 Hammer 12 Pund ns 5 16 21.00 0.11 23 72127004 Hammer 6 Pund ns 18 30 48.00 0.13 24 72127007 Hammer 5 Pund ns 46 22 68.00 0.15 25 72127005 Hammer 4 Pund ns 48 26 74.00 0.13 26 72147002 Bx Spanner ns 13 35 48.00 0.15 27 75407028 Tarplene 24 x 24 ns 12 8 20.00 0.29 28 74087008 Shrt chain fr LC L-1M ns 7 41 48.00 0.05 29 74087004 Lng chain fr LC L-9M ns 7 51 58.00 0.57 30 75557005 TSM Bags ns 75 0 75.00 0.23 31 60267119 SDS Max Flat Chiesel (L- ns 10 4 14.00 0.56 600) (Part N. 1618600203) - BOSCH Tls fr breaker 32 74907011 Crw Bar (Big Size) ns 71 0 71.00 0.35

P.Way Material requirement fr maintenance year 2012-13 PL N. Descriptin f Item Unit Quantity RN KW Ttal 33 75407039 Plastic Ferrul ns 2050 12000 14050.00 1.06 34 62280002 32 MM Dia GI Pipe Lse RMT 53 60 113.00 0.15 Scaling 35 72147017 Keyman Spanner ns 91 0 91.00 0.20 36 72167031 Pints & Xing rail nse wear ns 5 4 9.00 0.23 measuring guage (1 in 12 TWB) 37 72167032 Pints & Xing rail nse wear ns 5 4 9.00 0.23 measuring guage (1 in 12 38 72167033 Pints & Xing rail nse wear ns 5 4 9.00 0.23 measuring guage (1 in 8.5 OR) 39 60267029 Rail Drilling Machine ns 2 4 6.00 3.31 40 60267296 Rail Cutting Machine ns 3 4 7.00 8.66 41 60267026 Tree Cutting Machine ns 3 4 7.00 3.01 42 83037147 PTS & Xing Inspect register ns 50 50 100.00 0.5 43 83037141 Curve Inspectin Register ns 20 20 40.00 0.12 44 83037168 Tunnel Inspectin Register ns 25 20 45.00 0.13 45 83037148 LWR Register ns 25 20 45.00 0.16 46 83037146 PTS & Xing Jt. Inspectin ns 25 20 45.00 0.10 Register 47 83037143 LC Gate Inspectin Register ns 20 20 40.00 0.05 48 83037144 Cmplain Bk fr Rad ns 20 20 40.00 0.08 Users 49 83037142 Cutting Inspect Register ns 25 20 45.00 0.14 50 83037145 Equipment f LC Gate ns 20 20 40.00 0.05 51 60267120 PWI Tl Kit Bx ns 15 15 30.00 3.29 52 72167023 Measuring Steel Tape - 30M ns 0 12 12.00 0.05 53 72167024 Measuring Steel Tape - 15M ns 0 12 12.00 0.04 54 72167025 Measuring Steel Tape - 5M ns 0 15 15.00 0.02 55 72167026 Measuring Steel Tape - 3M ns 0 18 18.00 0.007 56 80907001 Black il litres 0 1500 1500.00 0.60 Ttal 56.419