2018-2019 VGRADNA Product Catalogue INGROUND DVIGALA 2017 2018 Enobatna vgradna dvigala KOCH, SERVISNA OPREMA, d.o.o. Špruha 42, SI-1236 Trzin prodaja@koch.si Tel.: +386 1 56 44 770 Fax: +386 1 56 44 772 aleksander.presekar@koch.si
24 INGROUND LIFTS Sololift 1.35 Pv Ø 213 Electro-hydraulic single-ram lift, 3.5 t capacity, flat lifting supports Application Check-in Wash Repairs and maintenance Test Recommendation/ Approval Renault SL 1.35 Pv 170-240: BMW / Mini SL 1.35 Pv 140-200: Opel Description: Steel cassette: Waterproof steel cassette Self-carrying Hydraulic unit: High stability (Cyl.-Ø213mm) Integrated anti-rotation device Corrosion-free guiding element Pump unit with immersed motor for fitting on wall Pneumatic emergency lowering Programmable pushbutton control unit Alarm signal / CE-stop Superstructure: 2 flat lifting supports in different lengths available Rubber-coated, non-skid pads Low minimum height Standard colours: Standard surface-treatment: Zinc-coated and painted in RAL 9006 white aluminium Versions: Steel cassette: Hot galvanized Coated Installation: Superstructure on floor Ceiling installation Hydraulic pump unit in floor Hydraulic pump unit on wall Optional extras: XY-pads Sets of rubber blocks, 40, 60, 80 and 100 mm Special colours available on request!
2494 845 65 43 ructional changes are subject to modifications * date 10 May, 2017 25 Scan the QR-Code for detailed product information. Further Information on www.autopstenhoj.com Technical data Pv superstructure Lifting capacity Lifting height Working height Cylinder diameter 3,500 kg 1,910 mm 1,975 mm + rubber pads 213 mm Total length min. max. Min. height 120-180: ~ 1,200-1,800 mm 140-200: ~ 1,400-2,000 mm 160-220: ~ 1,600-2,200 mm 170-240: ~ 1,700-2,400 mm 65 mm Lifting / lowering time (high pressure) approx. 30 sec. Foundation depth 2,650 mm Pump unit 3 kw 14 l Voltage 230 / 400 V 50 Hz 16 A Sololift 1.35 Pv (Zyl.Ø213) 112 1675 1020 Stroke length = 1910 mm 1000 334 295 Ø213 285 Pv 120-180 : 1200-1800 500 Pv 170-240 : 1700-2400 Pv 160-220 : 1600-2200 Pv 140-200 : 1400-2000 168 drive-on direction Cover Various pads XY-pads with rubber Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 02/2018.
26 INGROUND LIFTS Sololift 1.35 Saa Ø 213 Electro-hydraulic single-ram lift, 3.5 t capacity, superstructure with arms Application Wash Repairs and maintenance Body work Approvals / recommendations Volkswagen Group Renault Description: Steel cassette: Waterproof steel cassette Self-carrying Hydraulic unit: High stability (Cyl.-Ø213mm) Integrated anti-rotation device Corrosion-free guiding elements Pump unit with immersed motor for fitting in floor Pneumatic emergency lowering Programmable pushbutton control unit Alarm signal / CE-stop Superstructure: Double telescopic arms Internal arm locking system Low minimum height Standard colours: Base plate: RAL 7016 - grey Arms: RAL 3020 - red Versions: Steel cassette: Hot galvanized Coated Installation: Superstructure on floor Ceiling installation Hydraulic pump unit in floor Optional extras: Large program of extra pads Special colours available on request!
2494 845 94 Dimension sketch incl. specifications of level for drive-over height. onstructional changes are subject to modifications * date 10 May, 2017 27 Scan the QR-Code for detailed product information. Further Information on www.autopstenhoj.com Technical data Arm superstructure Lifting capacity 3,500 kg Min. height with pad No. 11027 (95-135 mm) Lifting height 1,910 mm Arm length, min. - max. 636-1,290 mm Working height 2,005-2,045 mm Construction height 94 mm Cylinder diameter Lifting / lowering time (high pressure) Foundation depth Pump unit Voltage 213 mm approx. 30 sec. 2,650 mm 3 kw 14 l 230 / 400 V 50 Hz 16 A Sololift 1.35 Saa (Zyl.Ø213) 1000 250 300 Stroke length = 1910 mm 334 295 Ø213 285 ca. 636-1290 drive-on direction 500 Serienausstattung: min. ca.95mm max. ca. 135mm (andere Steckpilze auf Anfrage) Corrosion-free guiding elements Internal arm locking system Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 02/2018.
28 INGROUND LIFTS Sololift 1.35 Fv Uni Ø 213 Electro-hydraulic single-ram lift, 3.5 t capacity, superstructure with lifting blades Application Check-in Wash Repairs and maintenance Description: Steel cassette: Waterproof steel cassette Self-carrying Hydraulic unit: High stability (Cyl.-Ø213mm) Integrated anti-rotation device Corrosion-free guiding element Pump unit with immersed motor for fitting on wall Pneumatic emergency lowering Programmable pushbutton control unit Alarm signal / CE-stop Superstructure: Superstructure with lifting blades on floor Adaptation to various wheel bases by re-positioning of lifting blades Low minimum height Standard surface-treatment: Hot galvanized Versions: Steel cassette: Hot galvanized Coated Installation: Superstructure on floor Ceiling installation Hydraulic pump unit in floor Hydraulic pump unit on wall Optional extras: Extra lifting blades Zinc coating on request!
29 Scan the QR-Code for detailed product information. Further Information on www.autopstenhoj.com Technical data Fv Uni Superstructure Lifting capacity 3,500 kg Total length 4,658 mm Lifting height 1,910 mm Wheel base, min. - max. 1,600 3,900 mm Working height 1,930 mm Total width 1,050 / 2,106 mm Cylinder diameter 213 mm Min. height 20 / 80 mm Lifting / lowering time (high pressure) approx. 30 sec. Foundation depth 2,650 mm Motor 3 kw 14 l Voltage 230 / 400 V 50 Hz 16 A 2494 845 Stroke length = 1910 mm 334 Lorem Cover ipsum voluntas Fitting of lifting blades Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 02/2018.
30 INGROUND LIFTS Mono Quick 30 High pressure and semi-hydraulic lift, 3 t capacity Application Repairs and maintenance Description: Adjustable H-shaped superstructure Skidproof rubber pads Semi-hydraulic with manouvering valve High pressure for either single or central operation (up to 6 lifts) Available with anti-rotation device Available with pilot valve Standard colours: RAL 7016 - grey Versions: Superstructure 1,400-2,000 mm adjustability lengthwise Optional extras: Safety leg Installation frame XY-pads Rubber pads Special colours available on request!
31 Scan the QR-Code for detailed product information. Further Information on www.autopstenhoj.com Technical data Pv superstructure Lifting capacity 3,000 kg Min. height 88 mm Lifting height 1,750 mm Total width 1,650 mm Cylinder diameter 238 mm Total length 2,000 mm Lifting / lowering time (high pressure) approx. 35 sec. Foundation depth 2,600 mm Pump unit 3 kw High pressure: 8 / 40 l Semi-hydraulic: 140 l Voltage 230 / 400 V 50 Hz 16 A Necessary constant air pressure 10 bar Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 02/2018.
32 INGROUND LIFTS Mono Flex H 30 High pressure and semi-hydraulic lift, 3 t capacity Application Wash Repairs and maintenance Body work Description: 4 different arm lengths Single telescopic arms 3 different base plates Semi-hydraulic with manouvering valve High pressure for either single or central operation (up to 6 lifts) Automatic arm locking system Available with anti-rotation device Available with pilot valve Standard colours: Base plate: RAL 7016 - grey Arms: RAL 3020 - red Versions: Mono Flex H 30 S (645/1,040 mm) Mono Flex H 30 CF (720/1,070 mm) Mono Flex H 30 CF VAN (720/1,070 mm) Mono Flex H 30 CF VAN L (830/1,395 mm) Special version: Mono Flex H 20 CF CAMP (910/1,400 mm) 2,000 kg capacity for lifting caravans S = screw pad CF = combiflex pad Optional extras: Safety leg Installation frame Extra pads for CF-models Protection bag Special colours available on request!
33 Scan the QR-Code for detailed product information. Further Information on www.autopstenhoj.com Technical data Arm superstructure Lifting capacity 3,000 kg Min. height 100 mm Lifting height Cylinder diameter Lifting / lowering time (high pressure) 1,750 mm 238 mm approx. 35 sec. Arm length, min. - max. min. / max. 645 / 1,040 mm 720 / 1,070 mm 835 / 1,395 mm 910 / 1,400 mm Foundation depth 2,600 mm Pump unit 3 kw High pressure: 8 / 40 l Semi-hydraulic: 140 l Necessary constant air pressure 10 bar Voltage 230 / 400 V 50 Hz 16 A Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 02/2018.
34 INGROUND LIFTS Mono Drive-On High pressure and semi-hydraulic lift, 3 t capacity Application Repairs and maintenance Description: 4,180 mm flush platforms 900 mm drive-on ramps Semi-hydraulic with manouvering valve High pressure for either single or central operation (up to 6 lifts) Available with anti-rotation device Available with pilot valve Standard colours: Platforms: RAL 7016 - grey Ramps: RAL 3020 - red Versions: A = flush platforms Drive-on ramps and stops Optional extras: Safety leg Installation frame Scissor jack Protection bag Set of two 1,300 mm drive-on ramps
35 Scan the QR-Code for detailed product information. Further Information on www.autopstenhoj.com Technical data Platforms Lifting capacity 3,000 kg Min. height 194 mm Lifting height 1,750 mm Total width 1,902 mm Cylinder diameter 238 mm Usable legth of platform 4,180 mm Lifting / lowering time (high pressure) approx. 35 sec. Platform width Distance between platforms 500 mm 902 mm Foundation depth 2,600 mm Wheel base, min. - max. variable Pump unit 3 kw High pressure: 8 / 40 l Semi-hydraulic: 140 l Necessary constant air pressure 10 bar Voltage 230 / 400 V 50 Hz 16 A Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 02/2018.