M-2 hapters Working condition.5 Ordering code.6 Dimensions.8 erformance data.9 Inlet relief options.1 Spool options.11 side options.14 side spool positioners.16 Inlet options.2 1
For Mobile nd Industrial Hydraulic pplications. MONOLOK DIREIONL ONROL VLVES M-2 / M-3 / M-4 / M-5 / MS-5 SEIONL DIREIONL ONROL VLVES SN-3 / SN-4 / SN-6 M-2 ONLY ONE SEION VILLE MS-5 VILLE SEIONS FROM 1 O 6 With Independent load check valve in each section, and optional port relief. Nominal flow rate 45 l/min 12 US gpm Operating pressure (maximum) 25 bar 36 psi Nominal flow rate 8 l/min 21 US gpm (maximum) series circuit 25 bar 36 psi M-3 VILLE SEIONS FROM 1 O 6 SN-3 VILLE SEIONS FROM 1 O 12 Nominal flow rate 45 l/min 12 US gpm (maximum) series circuit 21 bar 35 psi Nominal flow rate 5 l/min 13 US gpm (maximum) series circuit 21 bar 35 psi M-4 VILLE SEIONS FROM 1 O 6 SN-4 VILLE SEIONS FROM 1 O 12 Nominal flow rate 6 l/min 16 US gpm (maximum) series circuit 21 bar 35 psi Nominal flow rate 8 l/min 21 US gpm (maximum) series circuit 21 bar 35 psi M-5 VILLE SEIONS FROM 1 O 6 SN-6 VILLE SEIONS FROM 1 O 12 Nominal flow rate 8 l/min 21 US gpm (maximum) series circuit 25 bar 36 psi Nominal flow rate 14 l/min 37 US gpm (maximum) series circuit 21 bar 35 psi 2 3
M-2 Innovative Designs rofessional Quality ustomer Satisfaction! ONLY ONE SEION VILLE M-2 M-2 Specifications Nominal flow rate 45 l/min 12 US gpm Operating pressure (maximum) 25 bar 36 psi Fluid temperature range with NR(UN-N) seals from - 2 to 8 from - 4 to 176 F with FM(VION) seal from - 2 to 1 from - 4 to 212 F operating range from 15 to 75 mm 2 /s from 15 to 75 cst Viscosity min 12 mm 2 /s 12 cst max. 4 mm 2 /s 4 cst mbient temperature range from - 4 to 6 from - 4 to 14 F ll specifications, dimensions and design characteristics shown in this catalogue are subject to change without notice. www.w-youli.com.tw 4 5
M-2 M-2 M-2 / 1S - 3 / 1 8 L / G-3 / M1 1 2 3 4 5 1 2 3 4 5 ody kits Inlet relief (optional) Spool options "" side spool positioners (optional) "" side (optional) 3: Spool Options YE ODE DESRIION GE 1 YLM231 Double acting, 3 positions, with, closed in neutral position. 11 2 YLM232 Double acting, 3 positions, with, open to ank in neutral position. 11 3 YLM233 Single acting on closed in neutral position, 3 positions, plugged. 12 4 YLM233 Single acting on closed in neutral position, 3 positions, plugged. 12 9 YLM239 Double acting, 3 positions, with,,, closed in neutral position (losed center). 13 1 YLM231 Double acting, 3 positions, with, open to ank and, closed in neutral position (losed center). 13 4: Side Spool ositioners YE ODE DESRIION GE 6-1 YLM2461 Detent in pos. 1--2, without spring centered. 16 6-2 YLM2462 2 positions, detent in pos. -2, without spring centered. 16 6-3 YLM2463 2 positions, detent in pos. 1-, without spring centered. 16 8D2 YLM242 With spring return to neutral position and pin with M8 male thread for dual control. 16 8E3 YLM243 ON/OFF Electro-neumatic actuator. 17 8 YLM248 ON/OFF neumatic actuator. 17 8MG1 (NO) YLM2481 Microswitch kit operated in pos. 1 (Normally Open). 18 8MG2 (NO) YLM2482 Microswitch kit operated in pos. 2 (Normally Open). 18 8MG3 (NO) YLM2483 Microswitch kit operated in pos. 1&2 (Normally Open). 18 MG (NO) YLM2484 Microswitch with NO terminal. 18 8MG1 (N) YLM24811 Microswitch kit operated in pos. 1 (Normally losed). 18 1: ody kits WIHOU SERVIE OR VLVES RERRNGEMEN (INLUDE ODY, SELS, RINGS ND LOD HEK VLVE.) YE DESRIION 1 - S 1 section 2: Inlet Relief (optional) YE ODE DESRIION GE DG-2 YLM322 Range 4 to 8 bar / 58 to 115 psi, standard setting 8 bar / 115 psi. 1 DG-3 YLM323 Range 63 to 2 bar / 9 to 29 psi, standard setting 12 bar / 175 psi. 1 DG-4 YLM324 Range 16 to 315 bar / 23 to 46 psi, standard setting 22 bar / 32 psi. 1 SV YLM321 Relief valve blanking plug. 1 8MG2(N) YLM24821 Microswitch kit operated in pos. 2 (Normally losed). 18 8MG3 (N) YLM24831 Microswitch kit operated in pos. 1&2 (Normally losed). 18 MG (N) YLM24841 Microswitch with N terminal. 18 8 YLM248 With spring return to neutral position. 19 8-1 YLM2481 2 positions, with spring centered from pos. 1. 19 8-2 YLM2482 2 positions, with spring centered from pos. 2. 19 9-1 YLM2491 Detent in pos. 1, 2 with spring centered. 19 9-2 YLM2492 Detent in pos. 2 with spring centered. 19 9-3 YLM2493 Detent in pos. 1 with spring centered. 19 5: Side (optional) YE ODE DESRIION GE L YLM45 Standard lever box. 14 SL YLM451 Without lever box,with dust-proof plate. 14 Q YLM453 Flexible cable connection. 15 6 7
15 M-2 Dimensions M-2 erformance curve chart 194.2 7.64 36 1.41 96 3.77 4 1.57 28 1.1 31 1.22 92 3.62 46 1.81 7 2.75 55 2.16 48 1.88 ressure drop to 5 1 15 (US gpm) 1 (bar) (psi) 8 1 6 4 5 2 15 3 45 6 (l/min) Flow 3 62.2 2.44 4 1.57 Standard threads 23.9 3 1.18 orts Inlet and Outlet S G3/8 G3/8 G3/8 11.43 2 1 15 3 84.8 3.33 2.78 ressure drop to () 5 1 15 (US gpm) 1 (bar) (psi) 8 1 6 4 5 2 15 3 45 6 (l/min) Flow UN-UNF 3/4-16 UNF-2 (SE 8) 3/4-16 UNF-2 (SE 8) 3/4-16 UNF-2 (SE 8) MERI M18x1.5 M18x1.5 M18x1.5 G-1/2 : G4 G-3/8 : G3 G-3/4 : G6 SE 8: E8 SE 1: E1 SE 12: E12 SE 16: E16 ressure drop () to 5 1 15 (US gpm) 1 (bar) (psi) 8 1 6 4 5 2 15 3 45 6 (l/min) Flow 8 9
M-2 Inlet Relief (Optional) M-2 Spool Options ype DG YE 1 Direct pressure relief valve: 1 2 ø2.4.8 closed Max. 55.7 2.19 & & & closed open 1 2 ype SV Relief valve blanking plug: 1 2 21.83 closed 11.5.45 YE 2 1 2 closed & open 1 2 1 2 closed 1 11
M-2 Spool Options M-2 Spool Options YE 3 YE 9 closed 1 2 "" port plugged closed 1 2 & & closed open 1 2 "" port plugged & & & closed closed 1 2 open 1 2 "" port plugged closed 1 2 YE 4 YE 1 closed 1 2 "" port plugged closed 1 2 & & closed open 1 2 "" port plugged & & closed 1 2 closed 1 2 "" port plugged closed 1 2 12 13
M-2 Side M-2 Side ype L 1 2 Note : ONNEION KI NO INLUDE LE 22.5.89 58 2.28 65.5 2.58 1 2 ype L: SNDR LEVER KI 4 1.57 62.2 2.45 2.79 able ype R Q Kits 45.5 1.79 38 1.5 58 2.28 1 2 ype R: SNDR LEVER KI (ROED 18 DEGREE) 1 2 ype SL ype Q ø9 4 1.57 48.75 1.92 1 2 ype SL: WIHOU NY OVER 1.39 8 3.15 9 3.54 M6x1. M16x1.5 Q Kit: 1 2 ype SL ø9 9.35 1 2 ype SL: WIH DUS-ROOF LE 4 1.57 48.75 1.92 14 15
M-2 Side M-2 Side ype 6 ype 8 6-1 Kit: V1 & V2: N 1/8-27 1 2 DEEN IN OS. 1--2, WIHOU SRING ENERED 18.5 4.27 1 2 1 2 57 2.24 51.5 2.3 21.83 6-2 Kit: V2 1 2 2 2 OSIIONS, DEEN IN OS. -2, WIHOU SRING ENERED 42 1.65 V1 V1 V2 36 1.42 1.4 1 6-3 Kit: 2 OSIIONS, DEEN IN OS. 1-, WIHOU SRING ENERED Operating feature : ILO RESSURE (MIN.): 5.5 R / 8 SI ILO RESSURE (MX.): 1 R / 145 SI ype 8D2 ype 8E3 176 6.93 1 2 51.5 2.3 1 2 M8 9.35 22.5.89 37 1.46 1 2 8D2 Kit: WIH SRING REURN O NEURL OSIION ND IN WIH M8 MLE HRED FOR DUL ONROL 17.5 4.23 21.83 V1 ø4.16 V2 V1 V2 1 2 78 3.7 Solenoid operating features : 1.4 NOMINL VOLGE: 24VD NOMINL VOLGE OLERNE: 1% OWER RING: 5W 16 17
M-2 Side M-2 Side ype 8MG ype 8 1 2 8MG1 Kit: MIROSWIH WIH MLE/FEMLE ONNEOR, OERED IN OS. 1 1 2 8 Kit: SRING REURN O NEURL OSIION. 1 2 1 2 8MG2 Kit: MIROSWIH WIH MLE/FEMLE ONNEOR, OERED IN OS. 2 1 8-1 Kit: SRING REURN O NEURL OSIION. (2 OSIIONS) 36 1.42 113 4.45 1 2 1 2 8MG3 Kit: MIROSWIH WIH MLE/FEMLE ONNEOR, OERED IN OS. 1 ND OS. 2 2 8-2 Kit: SRING REURN O NEURL OSIION. (2 OSIIONS) 36 1.42 66 2.6 3 1.18 With NO contact (female connector with male end) ype 9 47 1.85 MIROSWIH Operating features : MEHNIL LIE: 5X1 5 OERIONS 24.94 1 2 9-1 Kit: DEEN IN OS. 1, 2 WIH SRING ENERED ELERIL LIE (RESISIVE LOD): 1 5 OERIONS - 7 / 13.5 VD 5x1 4 OERIONS - 1 / 12 VD 5x1 4 OERIONS - 3 / 28 VD 1 2 9-2 Kit: With N contact (male connector with female end) 1 2 DEEN IN OS. 2 WIH SRING ENERED 4.5 1.59 58.3 2.3 9-3 Kit: 21.5.85 1 2 DEEN IN OS. 1 WIH SRING ENERED 18 19
Memo M-2 Inlet simmetrical body allows the reverse assembly of spool and relative control kit and lever ( Left inlet) ( Right inlet) 2 21
Memo Memo 22 23
Memo 24