Page Page 1 of 7 1 Dial Indicating Bore Gauges (18-35mm) 1 Set a) Suitable for rapid, accurate measurement of size, concentricity, wear, taper, etc., in a wide range of bores. b) For workshop and inspection use. c) All models have one fixed and one moving anvil and a self-adjusting centre shoe. d) A datum point' can be set by using a setting ring of a known diameter or a micrometer. e) Zero' the gauge to this datum point by rotating the bezel to align zero' with the indicator. To check a bore is within tolerance, the limit hands can be fixed as required. f) All anvils are spring loaded to expand into the bore. For accurate reading ensure the stem of the gauge is parallelto the axis of thebore. g) This can be checked by locking' the gauge back and forth until the smallest diameter is found. All models have interchangeable anvils to cover a range of bore sizes. h) 29mm 11/8" Dial Diameter 18-35mm range anvils All supplied in a high quality fitted metal case.
Page Page 2 of 7 2 TELESCOPIC GAUGE SET (6-Pcs) 1 Set a) With knurled satin finish bodies providing positive adjustment of the hardened and radius ground plungers ensuring accurate measurement of the internal diameter when used with a micrometer. For smaller diameter measurements use a small hole gauge b) Supplied in a size marked PVC storage wallet c) with stud fastening.contents 1 x 'A' 8-12mm Range 1 x 'B' 12-19mm Range 1 x 'C' 19-32mm Range 1 x 'D' 32-54mm Range 1 x 'E' 54-90mm Range 1 x 'F' 90-150mm Range
Page Page 3 of 7 3 Precision External Micrometers (125-150mm) 1 Set a) With enameled frame and tungsten carbide tipped anvils. High quality fitted metal case with adjusting spanner. b) Sizes 25-50mm/1-2" and over supplied with setting standard. All supplied in a high quality fitted metal case. c) Manufactured to BS 870.Metric 4 ELECTRONIC TACHOMETER a) For measuring in rpm and rps. b) Precise red LED light source (laser beam) together with a reflective strip, non-contact measurements can be made safely up to 40cm (153/4) from the target. c) Testing range:1 to 3rpm/1.7 to 5rps. d) 6 digit clear LCD display with optional back light. Data hold function. e) Auto power OFF & low power indicator. f) Battery operated: DC1.5V 3x AAA (included). g) Conforms with EN61326-6: 26 and EN61326-2-2: 26. 1 unit
Page Page 4 of 7 5 RATCHET CONDUIT THREADER REX 2RE 1 set a) This compact and lightweight model ensures optimum threading in elevated or confined places. Ratchet supplied. b) Proven versatility in applications for gas/water supply pipes and thin steel conduits (by replacing dies). Set c/w Ratchet heat with 4 pce dies a) 19mm/3/4", dies b) 25mm/1", dies c) 31mm/1.1/4", dies d) 39mm/1.1/2" dies. Code No. Model Capacity (in.) 1102R3 2R3 ½ - 1 1102R4 2R4 ½ - 1¼ 1102RE 2RC C19-39
Page Page 5 of 7 6 GIRDER SECTION SPIRIT LEVEL 6mm/24" 1 unit 7 a) Industrial quality with three factories set vials, horizontal and 2 plumb, aluminum body with powder coat finish. b) Accuracy: 0.75mm/m. c) Top face marked with metric and imperial graduations. d) With magnetic base. Providus PG4M Blow Torch with Steel Cup and Ignition Switch 2 units a) Providus PG-4M Flame Temperture : 12 deg. Supplied c/w 1pc CG190-I International Gas Catridge 190g Complete with spring loaded locking device for refill catridge area Made in Italy since 1928.
Page Page 6 of 7 8 Internation Gas Catridge 190g 5 units a) International Gas Catridge CG190-I b) Replacement Gas Catridge 190g - for Providus PG4M Blow torch. 9 Karcher A24 Wet and Dry Vacuum Cleaner 1 unit a) The A24 is a Kärcher entry-level wet and dry vacuum cleaner it has a robust plastic container & comes equipped with a high level high capacity cartridge filter and a push & pull locking facility making it easy to open & close the container. Practical holders on the vacuum keep the standard accessories and suction hose securely stowed and always ready for use. b) 12 WattMotor 12LiterWasteCapacity 170mbarsuctiononhose 65Literspersecairflow c) Standardaccessories: 1.9 meter suction hose, 2 x 0.5m Extension tubes, Crevice Tool, Floor Tool, Paper Filter Bag, Cartridge Filter. Obsolete item - Replace by WD2.250
Page Page 7 of 7 Nota : 1. Sila nyatakan dengan jelas spesifikasi alatan yang ditawarkan berdasarkan TANDATANGAN PETENDER : spesifikasi UniKL MIMET di ruangan "" ALAMAT : 2. PEMBEKAL DIKEHENDAKI MENGEMUKAKAN KATALOG/ GAMBARAJAH CADANGAN.
Page Page 7 of 7 GAMBARAJAH CADANGAN UniKL MIMET 1) Dial Indicating Bore Gauges 18-35mm 4) ELECTRONIC TACHOMETER 2) TELESCOPIC GAUGE SET (6-Pcs) 5) RATCHET CONDUIT THREADER REX 2RE 3) Precision External Micrometers 6) GIRDER SECTION SPIRIT LEVEL 6mm/24"
Page Page 7 of 7 GAMBARAJAH CADANGAN UniKL MIMET 7)Providus PG4M Blow Torch with Steel Cup and Ignition Switch 9) Karcher A24 Wet and Dry Vacuum Cleaner 8) Internation Gas Catridge 190g