130 AC Single Point Actuator T-handle Surface mount installation Generous grip area Pull to activate Cable clip 20.8 (.82) 21.7 (.85) 23 (.91) Housing: PC/ABS, black T-handle and slide: 33% glass-filled nylon, black Clip: acetal, black Spring: Stainless steel, passivated 56 (2.20) 40±0.2 (1.57±.008) 45 (1.77) Housing T-handle 60 (2.36) Pull direction AC-60-101-11 25±0.2 (.98±.008) 4 x Ø 4.5±0.1 (.18±.004) (For thru hole mounting) 104.5 (4.11) 117 Open (4.61) AC Single Point Actuator Paddle Front mount installation Flush Two cable mounting options 53.7 (2.11) 80±0.3 (3.15±.012) 4 x R5 (.2) Max. 2 x Ø 4.5±0.1 (.177±.004) (For thru hole mounting) 21±0.2 (.83±.008) 42±0.5 (1.65±.02) Paddle and housing: 33% glass-filled nylon, black Spring: Stainless steel, passivated 28.7 (1.13) 5.7 (.22) 108.3 (4.26) Panel 91.6±0.3 (3.61±.012) 5.8±0.1 (.23±.004) 38.3 (1.51) Panel thickness Cable placement 2 Cable placement 1 Cable Orientation Panel Thickness Cable Travel Placement 1 12.5 (.49) max. 11.1 (.44) AC-70-101-11 Placement 2 16 (.63) max. 13.2 (.52)
AC Single Point Actuator Push-button 131 6 (.24) 64.6 (2.54) Knob Ø 26 (1.02) Ø 38 (1.50) Mounting nut Housing Door panel 26 (1.02) Max. panel thickness +1 Ø 32 +.04 (1.26 ) 30±0.2 (1.18±.008) Double-D hole preparation Flush Mounting hardware included Push button and housing: PC/ABS, black Cam: 33% glass-filled nylon, black Spring: Stainless steel, passivated ACTUAL SIZE Cam 13.7 (.54) Cable travel AC-80-101-11 AC Retainer Clips and Cables For use with Ø 4 (.157) rod or Southco cable assembly See www.southco.com Retainer clip Latch Series Retainer Clip R4-10 R4-43922 R4-30 R4-20 R4-43922-1 R4-50 Retainer clip see table Cable assembly contact Southco www.southco.com/r4
AC-30 Multi Point Actuator Push-Button Single or multi-point actuation capability Accommodates wide panel thickness Multiple key code options Single hole install Button: Nylon Housing: Zinc or Stainless Steel Lock Plug: Zinc Cam, Washer, Rivet: Stainless Steel, Passivated With cam attachment shown 28 (1.10) 64 (2.52) Without cam attachment shown Ø32 (1.26) Ø32.3 (1.27) Max No Spacer required if panel thickness > 10.3 (0.405) Panel Thickness from 1 to 22 (0.04 to 0.87) Max 2 X Ø5 ±0.1 (0.197 ±0.004) Push Travel 12 (0.47) 10 (0.39) Cam/ Cable Travel Ø 38.3 (1.51) 51.4 (2.02) Ø 28.8 (1.13) 29.1 (1.145) Max Ø4.1 (0.16) 2 (0.08) Housing Seal 28 (1.10) Tab Washer Spacer 42 (1.65) Metal Nut Push Down 12 (0.47) Cable Holder E-Ring Ø 32.4 (1.27 ) Panel preparation thickness 1 (0.04) to 22 (0.87) Selection 29.2 (1.15 ) E End Style 1 With Cam attached 3 Without Cam attached H Housing Material 1 Zinc with black powder coat 3 Stainless steel with black powder coat AC - 30 - E L M - H B - KC B Button Material 1 Nylon with black molding L Locking Option 1 Reversible key (No keys - R001) 2 Reversible key (2 keys included - R001) 3 Reversible key (Multiple key codes - 2 keys included) 4 Standard key (No keys - CH751) 5 Standard key (2 keys included - CH751) 6 Standard key (Multiple key codes - 2 keys included) KC Key Codes (Omit for locking options 1,2,4 and 5) KD10 Keyed differently (10 codes) MK10 Master keyed, keyed differently M Mounting Method 1 With spacer mounting (must have if glass panel) 2 Without spacer mounting
AC-40 Multi Point Actuator Push-Button Handle With cam attachment shown Ø 32 (1.26) Ø 32.3 (1,27) No Spacer if Panel Thickness > 4.6 (0.18) 34 (1.34) 28.8 (1.13) 181.4 (7.14) 47 (1.85) Single or multi-point actuation capability Accommodates wide panel thickness Multiple key code options Easy Grip Panel Thickness from 1 to 16.8 (0.04 to 0.66) Max. Without cam attachment shown 43 58 (2.28) 2 X Ø5 ±0.1 51.4 (2.02) Cam/Cable Travel 10 (0.39) Ø 4.1 (0.16) 142 ±1 (5.59 ±0.02) 34 (1.34) Button: Nylon Housing: Zinc Die Cast or Stainless Steel Lock Plug: Zinc Die Cast Cam, Washer, Rivet: Stainless Steel, Passivated Ø44 (1.73) 36 (1.42) 12 (0.47) Push Down M8 X 1.25 thread 18 depth Min (Max mounting torque: 40 N M) 142 ±1 (5.59 ±0.02) + 0.2 E End Style 1 With Cam attached 3 Without Cam attached + 0.2 29.2 (1.15 ) for Cable Cross Mounting Ø 32.4 (1.27 ) 29.2 (1.15 ) for Cable Parallel Mounting 8.4 ±0.1 (0.33 ±0.004) 13 ±0.2 (0.51± 0.008) H Handle Material 1 Black GF nylon with zinc housing insert 2 Black GF nylon with stainless steel housing insert Selection AC - 40 - E L M - H B - KC L Locking Option 1 Reversible key (No keys - R001) 2 Reversible key (2 keys included - R001) 3 Reversible key (Multiple key codes - 2 keys included) 4 Standard key (No keys - CH751) 5 Standard key (2 keys included - CH751) 6 Standard key (Multiple key codes - 2 keys included) B Button Material 1 Nylon with black molding KC Key Codes (Omit for locking options 1,2,4 and 5) KD10 Keyed differently (10 codes) MK10 Master keyed, keyed differently M Mounting Method 1 Cable parallel (or no cable), with spacer mounting (must have if glass panel) 2 Cable parallel (or no cable), without spacer mounting 3 Cable cross with spacer mounting (must have if glass panel) 4 Cable cross without spacer mounting Global Corporate Headquarters and Americas Customer Service & Technical Support Center Tel: (1) 610-459-4000 Fax: (1) 610-459-4012 www.southco.com info@southco.com Southco AC-30/40 752NA 05-11
AC-75 Single Point Actuator Paddle Front mount installation Flush Three cable mounting options Paddle and housing: Aluminum, black powder coated 96.2 (3.78) 13 (0.51) 37.1 (1.46) 49.2 (1.94) Door Cable Placement 1 37.1 (1.19) Cable Placement 2 Cable Placement 3 35.2 (1.38) 73 (2.87) 4X R5 Max 2X Ø 4.5 ±0.1 (.177±.004) (For thur hole mounting) 18.9 (0.74) 37.9 (1.49) 81 (3.2) 4 ±0.1 (0.15 ±0.003) AC-75-101-11 Cable Orientation Panel Thickness Cable Travel Placement 1 12.5 (.49) max. 11.1 (.44) Placement 2 16 (.63) max. 13.2 (.52) Placement 3 16 (.63) max. 13.2 (.52) Southco AC-75 743NA 05-11 Global Corporate Headquarters and Americas Customer Service & Technical Support Center Tel: (1) 610-459-4000 Fax: (1) 610-459-4012 www.southco.com info@southco.com
AC Single Point Actuators Stainless Steel M1 Style Actuator 38mm (1 1/2") version 50mm (2") version Ø 47 (1.85) Ø 61 (2.40) 34 (1.3) Door thickness () Door Small Ø38.1 ±0.5 (1.5 ±.02) + 1.2 Large Ø50 +.05 (2.0 ) Mounting Bracket Cable travel 13 (.51) Door thickness () 2.5 (.98) Small 38mm Version 3.0 (1.2) Large 50mm Version Cable retainer (Sold separate) (1/8 Mounting screw not included) Actuator Assembly () Link Retainer (Sold separate) R4-43922-2 Single, round-hole installation Locking style restricts access Premium finish and corrosion resistance Latch: 316 grade stainless steel and bright polished Spacer: Nylon, black Contact Southco for other finishes Performance Details Max. static load: 545 N (122 lbf) Accessories (Small) One key supplied per latch for additional keys order M7-88-9121324-S 50mm (2 ) version AC - M1 - L P - 8 38mm (1 1/2 ) version: (suits 9mm (3/8") or 12mm (1/2") panels): AC - M1-15 - L 1-8 AC Cables M5 Phillips Recess (No.2) Pan Head Mounting Screws Cable Retainer (Sold separate) (1/8 Mounting Screws not included) L Lock style 4 Locking (2 keys supplied) 6 Non-locking 7 Key-locking keyed alike S008 (2 overmoulded keys supplied (only available for 50mm 2 version) P Panel thickness 2 9mm (3/8 ) 3 12mm (1/2 ) Keeper: M1-510-19-8 Mounting screws: M1-510-96-4 Accessories (Large) Keeper Part number: M1-519-4 For lock style 4 Key (pair) Part number: M1-546 For lock style 7 Overmolded key S008 (pair) Part number: M1-525-39-S008 Actuator End (Option J shown) Optional spring to ensure cable reset) Latch End A Actuator fitting J Stainless barrel fitting to suit push-button and paddle actuators K Stainless L fitting to suit R4 latch and AC-M1 actuators L - 65.2mm (2.57) L 48mm (1.89) S Spring option 0 No Spring 1 With Spring (latch end only) AC - C A K S - 3 - LLLL 48 Cables Constructed from marine grade stainless materials, the cable is suitable for multiple bends and can be further customised upon request, Contact Southco Marine for details. An in-built spring prevents unintentional actuation by boat vibration. L Length in mm e.g. 0610 = 610 mm = 2 www.southco.com/r4
R4 Push-to-Close Latch Striker bolt Stainless Steel Mini Installation Striker bolt for R4-10 series rotary latch 304 Stainless Steel Striker Bolt Assembly (sold separately) 12.7 (.50) Hex 2.8 (.11) 38.1 (1.50) 27.7 (1.09) 25.4 (1.00) M8 x 1.25 thread Striker Bolt R4-90-121-20 Retainer clip (sold separately) Secures cable to AC-M1 actuator : R4-43922-2 Ø 25.4 (1.00) Ø 9.5 (.37) Striker bolt O-Ring Washer Striker 90 Mounting Bracket (sold separately) : R4-50114 Cable Mounting Bracket (sold separately). For use with AC-M1 actuators 8 (0.31) 14 (0.55) 26 (1.02) 40 (1.57) 10 (0.39) 6.6 (0.26) A 28 (1.10) 12 (0.47) 4.5 (0.18) Ø4 (Ø 0.16) 14 (0.55) Panel Preperation 3.5±0.05 (.14±.002) 2 x A Panel thickness R4-50253-1 28mm (1.10) 9mm (0.35) R4-50253-2 31mm (1.22) 12mm (0.47) 22.5±0.1 (.89±.004) 9 (.35) Max. 26 (1.02) Min. 5 (.20) Min. Operation To request a quote, please email releases@dbroberts.com, or call us at 800-773-5388. www.southco.com/r4 Southco R4SS 722NA 02-11 Latched position Global Corporate Headquarters and Americas Customer Service & Technical Support Center Tel: (1) 610-459-4000 Fax: (1) 610-459-4012 www.southco.com info@southco.com Unlatched position