Retroautos. All images copyright GM Archives Thanks to John Kyros at the GM Heritage Centre for the research.

Similar documents
Retroautos. From drawing board to driveway. Styling the 1963/64 Pontiacs.

Retroautos. Designing the 1963 Buick Riviera The style Endures. It s about the cars! Collectible & Classic

Forty Years of LH Torana

Retroautos. The 300 SL hits 60!

Retroautos. How the 1960 Corvair elected George W Bush. All images copyright GM Media RETROAUTOS November 2013 ISSN

There are many interesting. 40 Page

200 TRIPS THE D 42 MAMMOET WORLD Issue

TRAACA Tech Day: 1966 Ford Thunderbird Power Steering Pump Replacement By Craig Brown

Mike and Barb s 1953 MG TD

Door Panel Removal & Window Stop Adjustment

The Story of Patches by John Johnson

PRO/CON: Self-driving cars could take over the road in the near future

MGB V8 Roadster restoration project Report 130

(Note: copyrighted material provided for your viewing pleasure. Not to be copied or reproduced. Thank you!)

COURTESY OF MICHAEL TABE

Powered by. What does a chicken farmer know about auto racing?

collectible & classic RETROAUTOS Once Upon A Time.

LETTER TO PARENTS SCIENCE NEWS. Dear Parents,

CHEVROLET CASTING NUMBERS 1924 to 1928; 1929 to 1931 Revised April PART 2: 1929 to 1931

Unique Cast Iron Ives No. 3 Clockwork Locomotives By Roger A. Rydin

Henry Ford: A Giant of a Man

PART PROGRESSION LIST AND PART PRICE LIST S As of October 12, 2006

Clay is the Way Is a clay bar kit in your future?...it is if you want the best shine possible for your musclecar!

Lilac V-Twin Rotary Shift Feature Removal by David Bernardi Sydney, Australia November 1999

what you need to do is hit the taper housing as hard as you can with your hammers AT THE SAME TIME and at a slight angle, what will happen is you

Advance planning and this powerful generator provided emergency power during the 2003 blackout.

Mustang Radiator Conversion DIY. By GearHeadPeter. January 27, 2011

Some tips and tricks I learned from getting clutch out of vehicle Skoda Octavia year 2000

feature 10 the bimmer pub

Authenticating 1967 Rally Wheels

E-BOOK // HOT TO DRIVE A MANUAL CAR

The Franchise System on Two and a Half Pennies

Here s a great article I came across..

Mount polished. Frame layout

FSAAC Newsletter January 2018

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

The idea for the Biota was conceived when

FORD S WAY EVOLUTION OF THE A-9020 GAS/COWL TANK FILLER SCREEN ASSEMBLY AND A-9032 GAS TANK FILLER FLANGE ASSEMBLY PART 2 STEVE PLUCKER JUNE 8, 2009

Brake Upgrades for FWD/4WD with 5x100 stud pattern

Removing your Two-blade Hartzell HC-12 (?) 20 prop off a Franklin Engine (Or How do I change the prop cylinder O-rings! )

Road Safety Problems Documented On April 23, 2012

DECWARE HIGH DEFINITION TOWERS

Level 5-8 Little Lord Fauntleroy

I think that this is an important time for everyone to see how all of the pieces are going together in just one component. Pictures #1, #2, and #3

Physics 103 Lab MC-11: Elastic Collisions

New Gen GTO for an Old School GTO Guy By Terry Schott

2018 Odlum Brown Annual Address

Part One of Two - RoR Step-by-Step Review * K.S. Pittman Willys Drag Coupe Revell # :25 Scale Review Click Here to Buy This Kit

SPACE AGE STAR. Russell Heim JUNE 2018

Comments and facts below in chronological order as testing progress. Added non Added resistive Total load Watt meter kwh resistive

GENERAL MOTORS PROVING GROUND RECORDS, Accession 1758

Mark had the car on the lift when I got there. The dog was friendly, but not much help.

EAH153SY FITTING INSTRUCTIONS

History Of Manual And Automatic Transmission Cars That Have Both

BH128SY FITTING INSTRUCTIONS

Brake master cylinder replacement

Test of. Bell UH-1Y Venom. Produced by Area-51 Simulations

EVOLUTION OF THE MODEL A FORD FRAME ASSEMBLY A-5005-A, B, C AND D ACCORDING TO THE FORD ENGINEERING RELEASES STEVE C. PLUCKER COPYRIGHT, 2005

M:2:I Milestone 2 Final Installation and Ground Test

THE KENWORTH SHOWREEL

Rescuing a Saab 9-3 HOT Aero by Matt Barwell* *Raw and Unabridged

Thought to have one owner prior who purchased the car in Los Angeles.

Jake can skate on ice.

Transport Group Perspective Chris Blow Chair of The Guildford Society Transport Group 21st Jan 2015

Why it's not a good idea to buy from IGvault Posted by Dinky /03/16 14:56

NUTS & BOLTS Volume 2, Issue 10 October 2016

Physics 2048 Test 2 Dr. Jeff Saul Fall 2001

Manual Where Do I Get Cars Need Transmission Fluid

Internet Activity. Grammar. Week 8. Reflexive pronouns. ESCO English. When we use a reflexive pronoun. We use a reflexive pronoun:

A day with Monsieur C. and his Maserati A6GCS 21 April 2015 Remi Dargegen

ROTARY VERSUS RECIPROCATING ENGINES

ENTHUSIAST S RESTORATION MANUAL SERIES

Ohlins Shock Install and Rear Suspension Linkage Mod for the Aprilia RST 1000 Futura

84-86 Ford SVO Mustang AC Installation Guide

I also will show you pics of the first resin prototype of the new Skyline which were posted by the Matchbox-Team in Instagram.

The All New 750cc Four

Commitment to Innovation Leads Fairchild International to Launch New AC Scoop Powered by Baldor Products

TRICK FLOW HEADSThree

Utility Trailer 5 x 8 Building Notes

PYRTE. Building The Front Axle, Fork and Steering

There were very few changes (body-wise) to the MGB over the ten years of production in Australia.

8H64SY / NB7H64SY / NHB64SY FITTING INSTRUCTIONS

The Industrial Revolution and the Transition to the Modern Energy System. Lecture 6 GEOS 24705/ ENST 25500

RV8 boot lid lock and boot light switch

Improving the gearshift feel in an SW20.

Hidden Savings in Modern Manufacturing

Build your own. Pack. Stages 39-42: Receive more of Robi s electrical components

Falling workers, falling objects, and vehicle injuries

Amateur Radio Station WFØGM Repairing a Yaesu G-1000DXA Rotor

Siemen s Starter. a g rao

SILICON VALLEY / SAN JOSE DECEMBER 24, 2010 VOL. 27 NO. 40

1949 Model Identification

Extract from the 4 Corners program transcript from Jonathan Holmes' report into energy efficiency in Australian households, "The Home Front".

BM141SY FITTING INSTRUCTIONS

Bommarito Volkswagen of Hazelwood Hosts Triple Car Giveaway for Winfrey Ultimate Favorite Things Recipients

ECE 5332 Communications and Control in Smart Grid

BT180SY FITTING INSTRUCTIONS

All-New Holden Commodore Launching early 2018

Volvo 1800 Dash Pad Replacement

JKS Quicker Disconnects (Item 2030) Installation Guide

Transcription:

Collectible & Classic It s about the cars! All images copyright GM Archives 2014. Thanks to John Kyros at the GM Heritage Centre for the research. RETROAUTOS April 2014 ISSN 1836-9472

Everyone has an opinion about the 1965 HD Holden, especially its controversial blade-sharp front mudguards. How it got those guards is one of the great stories of Australian automobile folklore. Separated at birth: The 1965 Opel and Holden cars. Dates on the photos are just 10 weeks apart. The HD was shaped in Detroit by Leo Pruneau and Don Laski in mid 1962. Ironically, Leo became Holden s design supremo in the early 1970s. Speaking to, Leo told us About the HD story: In 1962 Don and I had, just finished the 1965 Opel Diplomat Kapitan and Admiral models and Bill Mitchell, boss of all of General Motors (GM) design around the world, gave us the job of doing the Holden, which was then given the code letters EF, not HD. That came later. Leo adds that Don and he used many of the Opel styling themes on the Holden, including the rear window which is concave in side view and convex in plan view.

More images of the 1965 Opel Kapitan Holden sent their top engineer, Reg Hall, to Detroit, to watch the clay prototypes of the HD sedan and wagon take shape. This smart idea meant the designers and Hall could overcome any engineering issues created by the styling as they went along. Leo picks up the story: Originally we had the car with front mudguards very similar to the Opel s, and the HR Holden s, which were flush with the grille. But Mitchell thought the car looked too short he liked really long cars---so he told us to make the front guards jut out ahead of the grille, like the Oldsmobile Toronado. Well, Reg Hall protested that it would be too hard to manufacture and told us cut them back and that s what we did.

April 1962 images of Leo s first styling clay for the EF/HD, taken in the styling courtyard at GM in Detroit

The familiar HD shape is starting to emerge in these May 1962 photos. Note the kick-up through the rear doors, which was later flattened for the production car. The front fender blades are squarer in shape.

Holden s engineer Reg Hall sits and looks at the front end of the EF/HD in the GM styling studios in Detroit. Then a week later Mitchell came back to the studio and ordered us to lengthen them again. Anyway, this lengthening and shortening argument went on for a couple of weeks and Don and I would cut them off and stick them back on again. Of course, Mitchell was always going to get what he wanted because he was the big boss. He convinced Holden s management to go with them and that s the way the HD Holden went into the showrooms. Leo also tells the story about how the EF code was changed to HD. Apparently, when Holden management and its new CEO, David Hegland, were in Detroit viewing the fibreglass model of the car before it was to be shipped to Australia,

someone in the group semi-joked that they ought to change the code from EF to DH in honour of Hegland s appointment. Hegland objected to that, so it was switched to HD, and that s how the HD became the HD. Below: The fibreglass model of the HD ready for Holden executives to review, on 22 nd August 1962. It was still called the EF, but that would change on this day. I was right there in the group when it happened says Leo.

Initial sales of the HD were strong but the styling was too futuristic for conservative Australians. When sales started to slow Holden brought forward its next model, the HR, with its blunter front end. When Leo was later transferred to Holden the first car he wanted to see was the HD and those damned front guards! he says today. Confounding the urban legend that HR was styled after the HD went on sale, photos in GM archives, seen here and dated January and April 1964, clearly show the HR shape was locked away a full year before the HD hit the showrooms, so someone was hedging their bets!

In November 1961, the Holden EF/HD program was commenced in Detroit. These images show two very early styling ideas from that month, which parallels the development of the 1963 Chevy Nova, also pictured here in colour. Indeed, one of the clays (top) is simply a slight variation of the Nova. The next page contains more of the two EF/HD styling ideas, before Leo Pruneau was given the styling assignment.

By the end of May 1962, the EF/HD styling was basically all wrapped up. Two and a half years later it was released to the Australian public.