Crawler Excavator R 964 C litronic` Operating Weight with Backhoe Attachent: 6,7 76,9 kg Operating Weight with Shovel Attachent: 67,3 76,4 kg Engine Output: 32 kw / 434 P Bucket Capacity: 2,, 3 Shovel Capacity: 3,4, 3
Technical Data Engine Rating per ISO 9249 32 kw (434 P) at 18 RPM Model iebherr D98 Type 8 cylinder V-engine Bore/Stroke 128/17 Displaceent 16,16 l Engine operation 4-stroke diesel coon rail injection turbo-charged inter-cooled reduced eissions Cooling water-cooled Air cleaner dry-type air cleaner with pre-cleaner, priary and safety eleents, autoatic dust discharge Fuel tank 12 l Standard sensor controlled engine idling Electrical syste Voltage 24 V Batteries 2 x 17Ah/12 V Starter 24 V/7,8 kw Alternator three phase current 28 V/8 A ydraulic Syste ydraulic pup for attachent and travel drive 2 iebherr variable flow, swash plate pups Max. flow 2 x 41 l/in. Max. pressure 3 bar Pup regulation electro-hydraulic with electronic engine speed sensing regulation, pressure copensation, flow copensation, autoatic oil flow optiizer, flow suation ydraulic pup for swing drive reversible, variable flow, swash plate pup, closed-loop circuit Max. flow 24 l/in. Max. pressure 34 bar ydraulic tank 6 l ydraulic syste 1 l ydraulic oil filter 2 full flow filters in return line with integrated fine filter area ( µ), 1 high pressure filter for each ain pup Cooler radiator, consisting of cooling unit for coolant and aftercooler as well as 2 nd cooler for hydraulic oil with hydrostatically regulated fan drive MODE selection adjustent of achine perforance and the hydraulics via a ode selector to atch applica - tion IFT for lifting FINE for precision work and lifting through very sensitive oveents ECO for especially econoical and environentally friendly operation POWER for axiu digging power and heavy duty jobs RPM adjustent stepless adjustent of engine output via the rp at each selected ode Menu for auxiliary functions 4 fixed adjustable oil flow paraeters for optional working tool ydraulic Controls Power distribution via control valves in single block with integrated safety valves Flow suation to boo and stick Closed-loop circuit for uppercarriage swing drive Activation electro-hydraulic control Attachent and swing proportional via joystick levers Travel proportional via foot pedals or reovable hand levers speed pre-selection Additional functions via foot pedals or joystick toggle switch Swing Drive Drive by iebherr swash plate otor with integrated brake valves Transission iebherr copact planetary reduction gear Swing ring iebherr, sealed single race ball bearing swing ring, internal teeth Swing speed,6 RPM stepless Swing torque 233 kn olding brake wet ulti-disc (spring applied, pressure released) Option pedal-controlled positioning brake Uppercarriage Design torque resistant odular upper frae design Attachent ounting parallel length girders Catwalks on both sides Operator s Cab Cab profiles and deep drawn technology, resiliently ounted, sound insulated, tinted windows. Front window arored glass, door with sliding window Operator s seat shock absorbing suspension, adjustable to operator s weight, 6-way adjustable seat Joysticks integrated into adjustable seat consoles Monitoring enu driven query of current operating conditions via the CD display. Autoatic onitoring, display, warning (acoustical and optical signal) and saving achine alfunction data, for exaple, engine overheating, low engine oil pressure or low hydraulic oil level eating syste standard autoatic air conditioning, cobined cooler/heater, additional dust filter in fresh air/recirculated Noise eission ISO 6396 pa (inside cab) = 7 db(a) 2/14/EC WA (surround noise) = 17 db(a) Undercarriage Versions heavy duty -S heavy duty, long undercarriage S- heavy duty version for extree and difficult application Drive iebherr swash plate otors with integrated brake valves on both sides Transission iebherr planetary reduction gears Travel speed /-S: low range 2,9 k/h high range 4,1 k/h S-: low range 2,6 k/h high range 3,7 k/h Drawbar pull ax. /-S: 3 kn S-: 71 kn Track coponents /-S: D 8 K, aintenance-free S-: B 9 S, aintenance-free Track rollers/carrier rollers /S-: 8/2 -S: 9/2 Tracks /-S: sealed and greased Track pads double-grouser beveled Digging locks wet ulti-discs (spring applied, pressure released) Brake valves integrated into travel otor Attachent Type cobination of resistant steel plates and cast steel coponents ydraulic cylinders iebherr cylinders with special seal-syste, shock-absorbed Pivots sealed, low aintenance ubrication autoatic central lubrication syste (except link and tilt geoetry) ydraulic connections pipes and hoses equipped with SAE split-flange connections Bucket standard equipped with 27 t lifting eye 2 R 964 C itronic
Diensions E D A2 A1 A W C K Q P X V U Z N S B G -S A 36 36 A1 3976 3976 A2 423 423 C 364 364 D 412 412 E 41 41 334 334 K 144 144 434 47 P 13 13 Q 6 6 S 32 32 U 46 7 N 6 7 6 7 B 412 412 412 412 412 412 G 417 417 432 417 417 432 Z 68 697 Stick Gooseneck Boo Gooseneck Boo ength 7, 8,2 V with - 2,6 66 8 Undercarriage 3,4 61 7 4,2* 8 7 V with -S- 2,6 67 81 Undercarriage 3,4 63 72 4,2* 9 77 W 2,6 39 43 3,4 42 42 4,2* 38 43 X 2,6 128 141 3,4 127 14 4,2* 126 14 * without bucket F E D A2 A1 A W C C1 K Q P X V U Z N S B G -S A 36 36 A1 3976 3976 A2 423 423 C 444 444 C1 449 449 D 412 412 E 41 41 F 168 168 334 334 K 144 144 434 47 -S P 13 13 Q 6 6 S 32 32 U 46 7 N 6 7 6 7 B 412 412 412 412 412 412 G 417 417 432 417 417 432 Z 68 697 V1 98 98 W1 4 4 X1 129 129 R 964 C itronic 3
Backhoe Attachent with Gooseneck Boo 7, ft 4 3 3 2 2 1 1 13 12 11 1 9 8 7 6 4 3 2 1 Digging Envelope 1 2 3 Stick lengths 2,6 3,4 4,2 Max. digging depth 7,2 8, 8,8 Max. reach at ground level 11, 12,3 13,1 Max. dup height 7,7 8,1 8, Max. teeth height 11, 11,9 12,3 Digging force ISO kn 38 26 22 t 31,4 26, 22,9 Breakout force ISO kn 33 33 33 t 34,2 34,2 34,2 Breakout force ISO ax. 36 kn/36,3 t - -1-1 -2-2 -3-1 -2-3 -4 - -6-7 -8-9 1 2 3-1 14 13 12 11 1 9 8 7 6 4 3 2 1 Operating Weight and Ground Pressure Operating weight includes basic achine with gooseneck boo 7,, stick 2,6 and bucket 4, 3. Undercarriage -S Pad width 6 7 6 7 Weight kg 67 663 673 667 673 684 Ground pressure kg/c 2 1,39 1,17,9 1,3 1,13,92 4 4 3 3 2 2 1 1 ft Buckets Std Cutting width 1 17 19 21 24 26 1 17 19 21 21 Capacity ISO 741 3 2, 3, 3, 4, 4,, 2, 2, 3, 3, 4, Weight Standard bucket with iebherr teeth Z 2 C kg 28 31 33 36 Weight Standard bucket with iebherr teeth Z 2 C kg 38 41 Weight bucket with iebherr teeth V 61 SD kg 32 3 38 41 43 Suitable for aterial up to a specific weight of with stick 2,6 t/ 3 2,2 2,2 1,8 1,8 1, 2,2 2,2 1,8 with stick 3,4 t/ 3 2,2 1,8 1,8 1, 1,2 2,2 1,8 1, 1,2 with stick 4,2 t/ 3 1,8 1, 1,2 1,8 1, 1,2 4 R 964 C itronic
ift Capacities with Gooseneck Boo 7, Stick 2,6 eight Under- Radius of load fro centerline of achine () () carriage 3, 4, 6, 7, 9, 1, 12, 1, -S 9, -S 7, -S 6, -S 4, -S 3, -S 1, -S -S 1, -S 3, -S 4, -S 6, -S 7, -S 7,# ( 7,#) 7,# ( 7,#) 1,8# (1,8#) 1,8# (1,8#) 11,7# (11,7#) 1,3 (1,6#) 11,7# (11,7#) 1,4 (1,6#) 22,6# (22,6#) 16,2# (16,2#) 13,1# (13,1#) 9,8 (11,3#) 22,6# (22,6#) 16,2# (16,2#) 13,1# (13,1#) 1, (11,3#) 27,8 (28,3#) 18, (18,9#) 12,7 (14,#) 9,3 (12,1#) 28,3# (28,3#) 18,3 (18,9#) 12,9 (14,#) 9, (12,1#) 2,9 (2,9#) 16,7 (2,8#) 11,9 (1,8#) 8,8 (12,6 ) 2,9# (2,9#) 17, (2,8#) 12,1 (1,8#) 9, (12,8#) 16,7# (16,7#) 2, (29,7#) 16, (21,6#) 11,3 (16,3 ) 8, (12,2 ) 16,7# (16,7#) 2,9 (29,7#) 16,2 (21,6#) 11, (16,4#) 8,7 (13,2#) 24,7# (24,7#) 2,6 (28,9#) 1,8 (21,3#) 11,1 (16,1 ) 8,4 (12,1 ) 24,7# (24,7#) 26,1 (28,9#) 16, (21,3#) 11,3 (16,3#) 8,6 (12,9#) 32,4# (32,4#) 26,2 (26,2#) 16, (19,8#) 11,2 (1,2#) 32,4# (32,4#) 26,2# (26,2#) 16,2 (19,8#) 11,4 (1,2#) 28,7# (28,7#) 21,7# (21,7#) 16,6 (16,6#) 28,7# (28,7#) 21,7# (21,7#) 16,6# (16,6#) 14,# (14,#) 14,# (14,#) Stick 3,4 eight Under- Radius of load fro centerline of achine () () carriage 3, 4, 6, 7, 9, 1, 12, 1, -S 9, -S 7, -S 6, -S 4, -S 3, -S 1, -S -S 1, -S 3, -S 4, -S 6, -S 7, -S 7,9# ( 7,9#) 7,9# ( 7,9#) 1,2# (1,2#) 9,4# ( 9,4#) 1,2# (1,2#) 9,4# ( 9,4#) 14,2# (14,2#) 11,7# (11,7#) 9,9 (1,2#) 6,2# (6,2#) 14,2# (14,2#) 11,7# (11,7#) 1,1 (1,2#) 6,2# (6,2#) 2,1# (2,1#) 17,1# (17,1#) 12,9 (13,3#) 9,3 (11,1#) 6,9 (8,7#) 2,1# (2,1#) 17,1# (17,1#) 13,1 (13,3#) 9, (11,1#) 7, (8,7#) 26,8 (29,2#) 17, (19,6#) 11,9 (14,8#) 8,8 (12,#) 6,6 (9,6 ) 27,2 (29,2#) 17,3 (19,6#) 12,1 (14,8#) 8,9 (12,#) 6,7 (9,6#) 1,1# (1,1#) 2,6 (29,6#) 16, (21,#) 11,3 (1,8#) 8,3 (12,1 ) 6,4 (7,7#) 1,1# (1,1#) 26, (29,6#) 16,3 (21,#) 11, (1,8#) 8, (12,6#) 6, (7,7#) 2,8# (2,8#) 2,3 (29,9#) 1,6 (21,3#) 1,9 (1,9 ) 8,1 (11,8 ) 2,8# (2,8#) 2,7 (29,9#) 1,8 (21,3#) 11,1 (16,2#) 8,3 (12,8#) 26,9# (26,9#) 2, (28,#) 1, (2,#) 1,8 (1,6#) 8,1 (11,8 ) 26,9# (26,9#) 26, (28,#) 1,8 (2,#) 11, (1,6#) 8,3 (12,1#) 33,6# (33,6#) 24,# (24,#) 1,9 (18,2#) 11,1 (13,8#) 33,6# (33,6#) 24,# (24,#) 16,2 (18,2#) 11,3 (13,8#) 2,3# (2,3#) 18,# (18,#) 13,7# (13,7#) 2,3# (2,3#) 18,# (18,#) 13,7# (13,7#) Stick 4,2 eight Under- Radius of load fro centerline of achine () () carriage 3, 4, 6, 7, 9, 1, 12, 1, -S 9, -S 7, -S 6, -S 4, -S 3, -S 1, -S -S 1, -S 3, -S 4, -S 6, -S 7, -S 7,6# ( 7,6#) 2,8# ( 2,8#) 7,6# ( 7,6#) 2,8# ( 2,8#) 8,2# ( 8,2#) 6,2# ( 6,2#) 8,2# ( 8,2#) 6,2# ( 6,2#) 1,2# (1,2#) 9,1# ( 9,1#) 7,3 ( 8,3#) 1,2# (1,2#) 9,1# ( 9,1#) 7, ( 8,3#) 23,9# (23,9#) 21,# (21,#) 1,2# (1,2#) 12,# (12,#) 9, (1,1#) 6,9 ( 8,9#) 23,9# (23,9#) 21,# (21,#) 1,2# (1,2#) 12,# (12,#) 9,6 (1,1#) 7,1 ( 8,9#) 12,4# (12,4#) 26,8# (26,8#) 17, (18,1#) 12,1 (13,7#) 8,8 (11,2#) 6,6 ( 9, ) 12,4# (12,4#) 26,8# (26,8#) 17,8 (18,1#) 12,4 (13,7#) 9, (11,2#) 6,7 ( 9,#) 14,# (14,#) 26, (29,6#) 16,2 (2,1#) 11,3 (1,#) 8,3 (12,#) 6,2 ( 9,2 ) 14,# (14,#) 26,4 (29,6#) 16, (2,1#) 11, (1,#) 8, (12,#) 6,4 (1,#) 18,# (18,#) 2,2 (3,2#) 1, (21,#) 1,8 (1,8#) 7,9 (11,7 ) 6, ( 9, ) 18,# (18,#) 2,6 (3,2#) 1,8 (21,#) 11, (1,8#) 8,1 (12,#) 6,2 (1, ) 23,2# (23,2#) 2,1 (29,2#) 1,2 (2,8#) 1,6 (1, ) 7,8 (11, ) 23,2# (23,2#) 2, (29,2#) 1, (2,8#) 1,8 (1,7#) 8, (12,3#) 28,6# (28,6#) 2, (26,6#) 1,4 (19,4#) 1,6 (14,7#) 7,9 (11,2#) 28,6# (28,6#) 2,9 (26,6#) 1,7 (19,4#) 1,8 (14,7#) 8,1 (11,2#) 32,1# (32,1#) 22,1# (22,1#) 1,9 (16,3#) 11,1 (11,9#) 32,1# (32,1#) 22,1# (22,1#) 16,2 (16,3#) 11,3 (11,9#) 14,1# (14,1#) 14,1# (14,1#) The load values are quoted in tons (t) on the backhoe bucket s load hook, and ay be swung 36 on fir and even ground. Values quoted in brackets apply to the undercarriage when in longitudinal position. Capacities are valid for 6 wide, double-grouser pads. Indicated loads are based on ISO 167 standard and do not exceed 7 % of tipping or 87 % of hydraulic capacity (indicated via #). Maxiu load for the backhoe bucket s lifting eye is 27 t. Without bucket (3, 3 ), the lift capacities will increase by 31 kg, without bucket cylinder, link and lever they increase by an additional 18 kg. ifting capacity of the excavator is liited by achine stability, hydraulic capacity and axiu perissible load of the load hook. According to European Standard, EN 474- in the European Union: Excavators ust be equipped with an overload warning device, a load diagra and autoatic check valves on the hoist cylinders when they are used for lifting operations which require the use of lifting accessories. R 964 C itronic
Backhoe Attachent with Gooseneck Boo 8,2 ft 4 4 3 3 2 2 1 1 - -1-1 -2-2 -3-3 14 13 12 11 1 9 8 7 6 4 3 2 1-1 -2-3 -4 - -6-7 -8-9 -1-11 1 1 2 3 14 13 12 11 1 9 8 7 6 4 3 2 1 Digging Envelope 1 2 3 Stick lengths 2,6 3,4 4,2 Max. digging depth 8,3 9,1 9,9 Max. reach at ground level 12,8 13, 14,3 Max. dup height 8,6 9, 9,4 Max. teeth height 12,4 12,8 13,2 Digging force ISO kn 38 26 22 t 31,4 26, 22,9 Breakout force ISO kn 33 33 33 t 34,2 34,2 34,2 Breakout force ISO ax. 36 kn/36,3 t Operating Weight and Ground Pressure Operating weight includes basic achine with gooseneck boo 8,2, stick 3,4 and bucket 2, 3. Undercarriage -S Pad width 6 7 6 7 Weight kg 69 66 67 669 67 686 Ground pressure kg/c 2 1,39 1,17,9 1,3 1,13,92 4 4 3 3 2 2 1 1 ft Buckets Std Cutting width 1 17 19 21 24 1 17 19 21 21 Capacity ISO 741 3 2, 3, 3, 4, 4, 2, 2, 3, 3, 4, Weight Standard bucket with iebherr teeth Z 2 C kg 28 31 33 36 Weight Standard bucket with iebherr teeth Z 2 C kg 38 Weight bucket with iebherr teeth V 61 SD kg 32 3 38 41 43 Suitable for aterial up to a specific weight of with stick 2,6 t/ 3 2,2 1,8 1, 1,2 1,2 2,2 2,2 1,8 1, 1,2 with stick 3,4 t/ 3 1,8 1, 1,2 1,8 1, 1,2 with stick 4,2 t/ 3 1, 1,2 1, 1,2 6 R 964 C itronic
ift Capacities with Gooseneck Boo 8,2 Stick 2,6 eight Under- Radius of load fro centerline of achine () () carriage 3, 4, 6, 7, 9, 1, 12, 1, -S 9, -S 7, -S 6, -S 4, -S 3, -S 1, -S -S 1, -S 3, -S 4, -S 6, -S 7, -S 7,9# ( 7,9#) 7,9# ( 7,9#) 8,# ( 8,#) 8,# ( 8,#) 13,1# (13,1#) 1,6# (1,6#) 9,1# ( 9,1#) 7,1 (8,3#) 13,1# (13,1#) 1,6# (1,6#) 9,1# ( 9,1#) 7,2 (8,3#) 1,8# (1,8#) 12,# (12,#) 9,1 ( 9,9#) 6,7 (8,7#) 1,8# (1,8#) 12,# (12,#) 9,3 ( 9,9#) 6,9 (8,7#) 1, (18,3#) 11,3 (13,4#) 8,4 (1,8#) 6,4 (9,2#) 1,8 (18,3#) 11, (13,4#) 8,6 (1,8#) 6, (9,2#) 14,4 (19,6#) 1,4 (14,#) 7,9 (11,#) 6, (9, ) 14,7 (19,6#) 1,6 (14,#) 8, (11,#) 6,2 (9,6#) 14,# (14,#) 14, (19,9#) 9,9 (14,9 ) 7, (11,2 ),8 (8,7 ) 14,# (14,#) 14,3 (19,9#) 1,2 (1,#) 7,7 (11,9#),9 (9,7 ) 23,4# (23,4#) 14, (19,4#) 9,8 (14,7 ) 7,3 (11, ),7 (8,7 ) 23,4# (23,4#) 14,3 (19,4#) 1, (1,#) 7, (12,#),9 (9,7 ) 24,9# (24,9#) 23,3# (23,3#) 14,3 (18,3#) 9,9 (14,4#) 7,4 (11,1 ) 24,9# (24,9#) 23,3# (23,3#) 14,6 (18,3#) 1,1 (14,4#) 7,6 (11,#) 2,9# (2,9#) 2,6# (2,6#) 14,8 (16,4#) 1,3 (12,9#) 2,9# (2,9#) 2,6# (2,6#) 1,1 (16,4#) 1, (12,9#) 16,3# (16,3#) 13,1# (13,1#) 16,3# (16,3#) 13,1# (13,1#) Stick 3,4 eight Under- Radius of load fro centerline of achine () () carriage 3, 4, 6, 7, 9, 1, 12, 1, 4,1# ( 4,1#) -S 4,1# ( 4,1#) 9, -S 7, -S 6, -S 4, -S 3, -S 1, -S -S 1, -S 3, -S 4, -S 6, -S 7, -S 7,4# ( 7,4#) 7,# (7,#) 7,4# ( 7,4#) 7,# (7,#) 9,3# ( 9,3#) 8,1# ( 8,1#) 7,2 (7,3#) 9,3# ( 9,3#) 8,1# ( 8,1#) 7,3 (7,3#) 21,2# (21,2#) 14,# (14,#) 1,8# (1,8#) 9,# ( 9,#) 6,8 (7,9#) 4,1# (4,1#) 21,2# (21,2#) 14,# (14,#) 1,8# (1,8#) 9,# ( 9,#) 6,9 (7,9#) 4,1# (4,1#) 11,# (11,#) 16,3 (16,8#) 11, (12,4#) 8, ( 9,9#) 6,3 (8,4#) 4,7 (6,2#) 11,# (11,#) 16,6 (16,8#) 11,7 (12,4#) 8,6 ( 9,9#) 6,4 (8,4#) 4,8 (6,2#) 11,1# (11,1#) 14,8 (18,7#) 1, (13,7#) 7,8 (1,8#),9 (8,9 ) 4, (6,6#) 11,1# (11,1#) 1, (18,7#) 1,8 (13,7#) 8, (1,8#) 6, (9,#) 4,6 (6,6#) 1,6# (1,6#) 14, (19,#) 9,9 (14,#) 7,4 (11, ),6 (8, ) 1,6# (1,6#) 14,3 (19,#) 1,1 (14,#) 7, (11,4#),7 (9,4#) 14,8# (14,8#) 2,8# (2,8#) 13,8 (19,6#) 9,6 (14, ) 7,1 (1,8 ),4 (8,4 ) 14,8# (14,8#) 2,8# (2,8#) 14,1 (19,6#) 9,8 (14,8#) 7,3 (11,7#),6 (9,3 ) 2,1# (2,1#) 23,3 (2,3#) 13,9 (18,8#) 9, (14, ) 7, (1,7 ),4 (8,4 ) 2,1# (2,1#) 23,8 (2,3#) 14,2 (18,8#) 9,7 (14,#) 7,2 (11,#),6 (9,2#) 2,7# (2,7#) 22,9# (22,9#) 14,2 (17,4#) 9,7 (13,#) 7,2 (1,6#) 2,7# (2,7#) 22,9# (22,9#) 14, (17,4#) 1, (13,#) 7,4 (1,6#) 2,8# (2,8#) 19,2# (19,2#) 14,8# (14,8#) 1,3 (11,#) 2,8# (2,8#) 19,2# (19,2#) 14,8# (14,8#) 1, (11,#) 13,4# (13,4#) 1,3# (1,3#) 13,4# (13,4#) 1,3# (1,3#) Stick 4,2 eight Under- Radius of load fro centerline of achine () () carriage 3, 4, 6, 7, 9, 1, 12, 1, -S 9, -S 7, -S 6, -S 4, -S 3, -S 1, -S -S 1, -S 3, -S 4, -S 6, -S 7, -S,6# (,6#),6# (,6#) 6,# (6,#) 6,# (6,#) 7,1# ( 7,1#) 6,# (6,#),2 (,4#) 7,1# ( 7,1#) 6,# (6,#),4 (,4#) 12,1# (12,1#) 9,# ( 9,#) 8,# ( 8,#) 6,8 (7,#), (6,4#) 12,1# (12,1#) 9,# ( 9,#) 8,# ( 8,#) 7, (7,#),1 (6,4#) 23,3# (23,3#) 1,# (1,#) 11,2# (11,2#) 8,6 ( 9,#) 6,3 (7,7#) 4,7 (6,8#) 23,3# (23,3#) 1,# (1,#) 11,2# (11,2#) 8,8 ( 9,#) 6, (7,7#) 4,8 (6,8#) 1,3# (1,3#) 1,3 (17,4#) 1,8 (12,7#) 7,9 (1,#),9 (8,3#) 4,4 (6,8 ) 1,3# (1,3#) 1,6 (17,4#) 11, (12,7#) 8,1 (1,#) 6, (8,3#) 4, (7,2#) 8,1# ( 8,1#) 16,# (16,#) 14,2 (18,8#) 9,9 (13,8#) 7,3 (1,8#), (8,4 ) 4,2 (6,6 ) 8,1# ( 8,1#) 16,# (16,#) 14,4 (18,8#) 1,2 (13,8#) 7, (1,8#),6 (8,8#) 4,3 (7,4 ) 12,6# (12,6#) 19,2# (19,2#) 13,6 (19,4#) 9, (14,4 ) 6,9 (1,6 ),2 (8,2 ) 4, (6,4 ) 12,6# (12,6#) 19,2# (19,2#) 13,9 (19,4#) 9,7 (14,4#) 7,1 (11,3#),4 (9,1#) 4,1 (7,3 ) 16,9# (16,9#) 22,7 (23,6#) 13, (19,1#) 9,3 (14,2 ) 6,8 (1,4 ),1 (8,1 ) 16,9# (16,9#) 23,1 (23,6#) 13,8 (19,1#) 9, (14,4#) 6,9 (11,3#),3 (9,1 ) 21,# (21,#) 23,2 (24,6#) 13,7 (18,1#) 9,3 (13,9#) 6,8 (1, ),2 (8,2 ) 21,# (21,#) 23,6 (24,6#) 14, (18,1#) 9,6 (13,9#) 7, (1,9#),4 (8,#) 26,7# (26,7#) 21,6# (21,6#) 14,2 (16,2#) 9,7 (12,#) 7,1 ( 9,6#) 26,7# (26,7#) 21,6# (21,6#) 14, (16,2#) 9,9 (12,#) 7,3 ( 9,6#) 23,# (23,#) 17,# (17,#) 12,8# (12,8#) 9,6# ( 9,6#) 23,# (23,#) 17,# (17,#) 12,8# (12,8#) 9,6# ( 9,6#) The load values are quoted in tons (t) on the backhoe bucket s load hook, and ay be swung 36 on fir and even ground. Values quoted in brackets apply to the undercarriage when in longitudinal position. Capacities are valid for 6 wide, double-grouser pads. Indicated loads are based on ISO 167 standard and do not exceed 7 % of tipping or 87 % of hydraulic capacity (indicated via #). Maxiu load for the backhoe bucket s lifting eye is 27 t. Without bucket (3, 3 ), the lift capacities will increase by 31 kg, without bucket cylinder, link and lever they increase by an additional 18 kg. ifting capacity of the excavator is liited by achine stability, hydraulic capacity and axiu perissible load of the load hook. According to European Standard, EN 474- in the European Union: Excavators ust be equipped with an overload warning device, a load diagra and autoatic check valves on the hoist cylinders when they are used for lifting operations which require the use of lifting accessories. R 964 C itronic 7
Shovel Attachent ft 3 3 2 2 11 1 9 8 7 6 T Digging Envelope Max. reach at ground level Max. dup height Max. crowd length Bucket opening width T Max. crowd force Max. crowd force at ground level Max. breakout force 8,79 7,2 3,61 16 kn/1, t 41 kn/41,8 t 37 kn/37,7 t 1 1 - -1-1 4 3 2 1-1 -2-3 -4 1 9 8 7 6 4 3 2 1 Operating Weight and Ground Pressure Operating weight includes basic achine with cab elevation, shovel attachent and botto dup bucket 4, 3, level II. Undercarriage -S Pad width 6 6 Weight kg 673 679 683 689 Ground pressure kg/c 2 1,42 1,2 1,38 1,16 3 2 2 1 1 ft Botto Dup Bucket Cutting width SAE 227 1) 227 1) 27 1) 27 1) 27 1) Capacity SAE 3 3, 3, 4, 4, 4, Weight kg 8 64 63 7 Suitable for aterial up to a specific weight of t/ 3 2,2 2,2 1,8 1,8 1,6 Wear kit level II III I II I 1) Botto dup bucket with Delta cutting edge and teeth size 2 evel I: For non-abrasive aterials, such as liestone without flint inclusion, shot aterial or easily breakable rock, i.e., deteriorated rock, soft liestone, shale, etc. evel II: For pre-blasted heavy rock, or deteriorated, cracked aterial (classification 3 to 4, accord. to DIN 183). evel III: For highly-abrasive aterials such as rock with a high silica content, sandstone etc. 8 R 964 C itronic
Shovel Attachent Super Mass Excavation ft 3 3 2 2 11 1 9 8 7 6 T Digging Envelope Max. reach at ground level Max. dup height Max. crowd length Bucket opening width T Max. crowd force Max. crowd force at ground level Max. breakout force 8,7 7,4 3,66 16 kn/1, t 41 kn/41,8 t 37 kn/37,7 t 1 1 - -1-1 4 3 2 1-1 -2-3 -4 1 9 8 7 6 4 3 2 1 Operating Weight and Ground Pressure Operating weight includes basic achine with counterweight 14, t, cab elevation, shovel attachent and botto dup bucket 4, 3, level II. Undercarriage S- Pad width 6 Weight kg 77 764 Ground pressure kg/c 2 1,3 1,28 3 2 2 1 1 ft Botto Dup Bucket Cutting width SAE 27 1) 27 1) 27 1) 27 1) 27 1) 27 1) Capacity SAE 3 4, 4, 4, 4,,, Weight kg 7 7 64 71 8 6 Suitable for aterial up to a specific weight of t/ 3 2,2 1,8 1,8 1,8 1,6 1,6 Wear kit level III I II III I II 1) Botto dup bucket with Delta cutting edge and teeth size 2 evel I: For non-abrasive aterials, such as liestone without flint inclusion, shot aterial or easily breakable rock, i.e., deteriorated rock, soft liestone, shale, etc. evel II: For pre-blasted heavy rock, or deteriorated, cracked aterial (classification 3 to 4, accord. to DIN 183). evel III: For highly-abrasive aterials such as rock with a high silica content, sandstone etc. R 964 C itronic 9
Diensions SME E D A2 A1 A W C K Q P X V U Z N S B G S- A 36 A1 3976 A2 423 C 379 D 412 E 41 349 K 18 44 P 127 Q 6 S 32 U 74 N 6 7 B 398 398 4 G 441 441 441 Z 7 Stick Gooseneck Boo ength 7, V with S-- Undercarriage 3, 63 W 3, 41 X 3, 127 F E D A2 A1 A W C C1 K Q P X V U Z N S B G S- A 36 A1 3976 A2 423 C 48 C1 463 D 412 E 41 F 168 349 K 18 44 S- P 127 Q 6 S 32 U 74 N 6 7 B 398 398 4 G 441 441 441 Z 7 V1 99 W1 41 X1 129 1 R 964 C itronic
Backhoe Attachent Super Mass Excavation with Gooseneck Boo 7, SME ft 4 3 3 2 2 1 13 12 11 1 9 8 7 6 4 Digging Envelope Stick length 3, SME Max. digging depth 7,4 Max. reach at ground level 11,9 Max. dup height 8,2 Max. teeth height 11,8 Digging force ISO kn 328 t 33,4 Breakout force ISO kn 39 t 4,3 1 3 - -1-1 -2-2 2 1-1 -2-3 -4 - -6-7 -8 13 12 11 1 9 8 7 6 4 3 2 1 Operating Weight and Ground Pressure Operating weight includes basic achine with counterweight 14, t, gooseneck boo SME 7,, stick SME 3, and bucket 4, 3. Undercarriage S- Pad width 6 7 Weight kg 72 79 769 Ground pressure kg/c 2 1,1 1,27 1,3 4 3 3 2 2 1 1 ft Buckets -V Cutting width SAE 23 1) 23 2) 23 3) Capacity ISO 741 3 4, 4, 4, Weight kg 4 46 Suitable for aterial up to a specific weight of with stick 3, SME t/ 3 1,8 1,8 1,8 1) eavy duty rock bucket with teeth size V 61 SD (appropriate for aterial above classification 6, according to VOB, section C DIN 183) 2) eavy duty rock bucket with delta cutting edge and teeth size V 61 SD (appropriate for aterial above classification 6, according to VOB, section C DIN 183) 3) -V rock bucket with teeth size V 61 SD (appropriate for aterial above classification 6, according to VOB, section C DIN 183) R 964 C itronic 11
ift Capacities Super Mass Excavation with Gooseneck Boo 7, SME Stick 3, SME eight Under- Radius of load fro centerline of achine () () carriage 3, 4, 6, 7, 9, 1, 12, 7, S- 8,3# ( 8,3#) 6, S- 4, S- 3, S- 1, S- S- 1, S- 3, S- 4, S- 6, S- 9,7# ( 9,7#) 8,7# ( 8,7#) 19,8# (19,8#) 19,7# (19,7#) 14,# (14,#) 11,1# (11,1#) 9,4# ( 9,4#) 2,2# (2,2#) 16,6# (16,6#) 12,6# (12,6#) 1,3# (1,3#) 7,9# (7,9#) 28,1# (28,1#) 18,7# (18,7#) 13,8# (13,8#) 1,6 (11,#) 8, (8,1#) 16,# (16,#) 28,# (28,#) 19,7# (19,7#) 13,8 (14,6#) 1,2 (11,4#) 24,6# (24,6#) 27,4# (27,4#) 19,4 (19,#) 13, (14,6#) 1, (11,3#) 33,# (33,#) 2,# (2,#) 18,3# (18,3#) 13, (13,8#) 29,1# (29,1#) 2,9# (2,9#) 1,# (1,#) 11,4# (11,4#) 14,# (14,#) The load values are quoted in tons (t) on the backhoe bucket s load hook, and ay be swung 36 on fir and even ground. Values quoted in brackets apply to the undercarriage when in longitudinal position. Capacities are valid for 6 wide, double-grouser pads. Indicated loads are based on ISO 167 standard and do not exceed 7 % of tipping or 87 % of hydraulic capacity (indicated via #). Maxiu load for the backhoe bucket s lifting eye is 27 t. Without bucket (4, 3 ), the lift capacities will increase by 4 kg, without bucket cylinder, link and lever they increase by an additional 114 kg. ifting capacity of the excavator is liited by achine stability, hydraulic capacity and axiu perissible load of the load hook. According to European Standard, EN 474- in the European Union: Excavators ust be equipped with an overload warning device, a load diagra and autoatic check valves on the hoist cylinders when they are used for lifting operations which require the use of lifting accessories. 12 R 964 C itronic
Coponent Diensions and Weights Basic Machine Track pads 6 7 Weight with -Undercarriage kg 6 16 Weight with -Undercarriage and counterweight 14 kg kg 34 41 1 Weight with -S-Undercarriage kg 1 16 27 Weight with -S-Undercarriage and counterweight 14 kg kg 44 1 61 Weight with S--Undercarriage and counterweight 14 kg kg 83 89 99 Cab Elevation ength 182 eight 93 Width 137 Weight kg 6 Counterweight ength 79 79 eight 139 139 Width 326 326 Weight kg 11 14 Upper Protection Screen ength 196 eight 18 Width 111 Weight kg 7 R 964 C itronic 13
Coponent Diensions and Weights oist Cylinders (two) ength 26 eight 49 Width 36 Weight kg 2 x 7 Gooseneck Boo with Stick Cylinder Stick length 7, 7, 8,2 SME ength 73 73 8 eight 22 22 22 Width 14 14 14 Weight kg 73 71 78 Stick with Bucket Cylinder Stick length 3, 2,6 3,4 4,2 SME ength 44 39 46 4 eight 13 12 12 12 Width 9 9 9 9 Weight kg 38 34 37 4 Backhoe Buckets Std Cutting width 1 17 19 21 24 26 I Capacity 3 2, 3, 3, 4, 4,, ength 22 22 22 22 22 22 eight 16 16 16 16 16 16 Width 1 17 19 22 24 26 Weight kg 28 31 33 36 38 41 Backhoe Buckets Cutting width 1 17 19 21 21 I Capacity 3 2, 2, 3, 3, 4, ength 22 22 23 23 23 eight 16 16 16 16 17 Width 16 18 2 21 21 Weight kg 32 3 38 41 43 Backhoe Buckets SME -V Cutting width 23 23* 23 I Capacity 3 4, 4, 4, ength 2 2 23 eight 17 17 17 Width 24 24 24 Weight kg 4 46 * with Delta-cutting edge 14 R 964 C itronic
Coponent Diensions and Weights Shovel Boo ength 48 eight 19 Width 19 Weight without crowd cylinder kg Weight crowd cylinder kg 6 Shovel Stick ength 32 eight 11 Width 16 Weight kg 24 Shovel Bucket Cylinders (two) ength 2 Ø Diaeter 3 Weight kg 2 x 42 Botto Dup Buckets Cutting width 227 27 27 I Capacity 3 3, 4, 4, ength 2 2 21 eight 21 21 22 Width 23 26 26 Weight evel I kg 7 evel II kg 8 63 evel III kg 64 Botto Dup Buckets SME Cutting width 27 27 27 I Capacity 3 4, 4,, ength 2 2 22 eight 21 23 24 Width 26 26 26 Weight evel I kg 7 8 evel II kg 64 6 evel III kg 7 71 R 964 C itronic 1
Equipent Undercarriage S O Operator s Cab S O Three track guides per track oad bearing sectional profile structure, covered with deepdrawn Integrated travel drive panels Digging locks Tinted side windows Tracks greased and sealed Arored windshield Protection on idler end Door with sliding window Different undercarriage versions Washer-wiper for front and roof window Different track pad widths 6-way adjustable cloth suspension seat Seat and consoles independently adjustable Coat hook Autoatic cliate control with defroster function Uppercarriage S O Doe light Sun blinds Engine hood with lift assistance Radio installation prep-kit ockable tool box Reovable handles for travel pedals andrails, non slip surfaces Cigarette lighter and ashtray Tool kit Reovable custo floor at Maintenance-free swing brake lock Storage and literature tray Maintenance-free -batteries Digital instruentation Sound insulation Digital instruents for oil tep., engine RPM and oil pressure Electric fuel tank filler pup Digital hour eter visible fro outside Pedal controlled positioning swing brake AM/FM stereo radio Custoized paint copl. achine Electric cool box Protection for front working light Air power seat adjustent with heating eavy counterweight Warning beacon Additional headlights on cabin roof (front and rear) Upper protection screen (FOPS) Front guard tiltable ydraulics S O Electric drive away lock Extinguisher Electronic pup regulation Stepless work ode selector Pressure storage for controlled lowering of attachents with engine turned off ydraulic tank shut-off valve Attachent S O Pressure copensation Cylinders with shock absorbers Flow copensation Autoatic central lubrication syste (except link and tilt Filter with integrated fine filter area ( µ) geoetry) Pressure test ports Re-Generation plus Additional hydraulic circuits Sealed pivots/o-ring sealed between bucket and stick Bio-degradable hydr. oil SAE split flanges on all high pressure lines Filter for secondary circuit Work light on boo 27 t load eye on bucket or quick-coupler Overload warning device ydraulic quick change coupler Engine S O Piston rod protection Copletely sealed bucket linkage Coon rail injection Quick disconnect hose couplers for additional tools Turbo charger ydraulic lines for additional tools Main switch for electric circuit Central lubrication for lever with protection cover Dry-type air cleaner w/pre-cleaner, ain and safety eleents iebherr working tools Autoatic engine idling Special application buckets Air filter with autoatic dust ejector Custoized colors Confor with standard level IIIA / Tier 3 Engine cold starting aid Fuel pre-heater S = Standard, O = Option Options and/or special attachents, supplied by vendors other than iebherr, are only to be installed with the knowledge and approval of iebherr to retain warranty. Printed in Gerany by Eberl RG-BK-RP FR/SP 14119-2-3.7 Illustrations and data ay differ fro standard equipent. Subject to change without notice. All indicated loads are based in accordance with ISO 9248. iebherr-france SAS 2, avenue Joseph Rey, B.P. 9287, F-68 Colar Cedex +33 389 21 3 3, Fax +33 389 21 37 93 www.liebherr.co, E-Mail: info.lfr@liebherr.co