The Ready Berm Manufactured by Ready Containment, LLC. under a strict ISO Certified Quality Management System. Rapid Deploying No Loose Parts 7 Year Warranty Recommend Options: Heavy Duty Ground Mat Chemical Resistant Track Mat The portable, rugged, and compact design allows for an easy and quick deployment. The The Ready Berm is fabricated with Grade A Factory Certified ER-1000. See spec and chemical resistance sheet below. Reinforced fully welded corners prevent spills. Includes.3/4 inch threaded drain to work with Passive filter. Perimeter skirt allows berm to be staked or weighted with sand bags to prevent the wind from getting under berm during outdoor use. Long Term Mil Spec Foil-O-Wrap packing. Wall height are available in 12.5, 18.5" and 24.5" When you need to be Sure, be Sure to be Ready! Warranty does not cover any shipping. Berm must be shipped back to factory prepaid. READY CONTAINMENT, LLC. 2300 South Dock Street Suite 101 Palmetto, FL 34221 941-739-9486 Fax 941-758-5737 Toll Free 800-959-8676 WWW.READYCONTAINMENT.COM
Passively filter hydrocarbons from storm-water in outdoor containment products The best protection for non-monitored containment sites. Helps eliminate problems associated with the collection of rainwater in outdoor containment products. Simple installation - can be connected to any outdoor containment product. Hydrocarbon "sheens" and modest spills are captured - clean storm water drains through the outflow port. Larger or concentrated spills activate "auto-shutoff" mechanism. Manual shutoff valve can be used to secure all draining operations, change out the filter cartridge. Filters are quickly and easily replaced. Part # Description Dimensions in. (mm) Material Flow Rate gal. (L) per hour* Weight lbs. (kg) Replacement Filter Part# 9935 Standard * At 2 WC (Head Pressure) 28 L x 3½ dia. (712 x 89) PVC 7.5 (29) 2.0 (1.0) 9936 (Qty. 2) READY CONTAINMENT, LLC. 2300 South Dock Street Suite 101 Palmetto, FL 34221 941-739-9486 Fax 941-758-5737 Toll Free 800-959-8676 WWW.READYCONTAINMENT.COM
R E S I S T A N C E C H A R T E R 1 0 0 0 Good = A Poor = B Not Compatible = C ( ) = estimated value Liner Type/Composition ER 1000 Liner Type/Composition ER 1000 WATER/SALT SOLUTIONS ALCOHOLS/OTHER ORGANICS Water A 100% Methanol A 2% Potassium Chloride brine solution A 100% Ethanol A 10% Potassium Chloride brine solution A 100% Isopropanol A Seawater A 100% Butanol A 10% Sodium Chloride brine solution A Alcohol blends A 25% Sodium Chloride brine solution A Ethoxylated C12+ alcohols (A) 38% Calcium Chloride brine solution A Acetylenic alcohols (i.e., propargyl alcohol) (A) 100% Triethanolamine (B) ORGANIC ACIDS/ANHYDRIDES 100% Diethanolamine (B) 50% Citric Acid solution A 100% Monoethanolamine (B) 10% Acetic Acid solution (B) 70% Tetramethyl ammonium chloride (quat) (A) Glacial Acetic Acid (C) 50% Tetramethyl ammonium chloride (quat) (A) Acetic Anhydride (C) 100% Glycerin A 60/40 Acetic Acid/Acetic Anhydride (C) 100% Ethylene glycol A Acrylic Acid (C) 100% Diethylene glycol A 100% Ethylene glycol monobutyl ether (B) MINERAL ACIDS 32% Hydrochloric Acid C Fuels & Oils 20% Hydrochloric Acid (C) Gasoline B 15% Hydrochloric Acid (B) Kerosene A Hydrochloric Acid/Acetic Acid blends (C) Diesel A Xylene (C) ALKALIS Toluene C 50% Sodium Hydroxide solution A Heavy Aromatic Naphtha (HAN) (A) 50% Potassium Hydroxide solution A Mineral oil A 50% Ammonium Hydroxide solution A Motor oil A 50% Potassium Carbonate solution A Hydrogenated Mineral oil, Flash > 175F (A) KOH and Pot carb blends A Palm oil (A) d-limonene (A) OXIDIZERS Hydrogen peroxide A OXYGEN SCAVENGERS Sodium hypoclorite A Sodium thiosulfate (A) Calcium hypochlorite (A)
P R O D U C T D A T A S H E E T ER 1000 Ethylene/vinyl acetate/ PVC Alloy for improved durability & Chemical Resistance. End Use: Tanks, Berms, Oil Booms, Inflatable Boats. Update: January, 2010 Base Fabric P R O P E R T Y T Y P I C A L C H A R A C T E R I S T I C S T E S T & M E T H O D S T A N D A R D M E T R I C Total Weight ASTM D 751 Breaking Strength Strip ASTM D 751 procedure B Breaking Strength Grab ASTM D 751 procedure A Tear Strength ASTM D 751 procedure B Coating Adhesion (RF welding) ASTM D 751 Blocking Resistance ASTM D 751-70 C (160 F) 6 hrs Cold Crack / Bend ASTM D 2136, DIN 53361 Polyester 1,000 Den 8.1 [Oz/yd²] Polyester 1,100 Dtx 275 [gr/m²] 29.5 [Oz/yd²] 1000 [gr/m²] 440 / 415 [lbs/inch] 400 / 380 [Kg / 5 cm] 600 [lbs] 275 [Kg] 77 / 55 [lbs] 32 / 25 [Kg] 22 [lbs/inch] 20 [Kg / 5 cm] #1-40 F - 40 C Comments: Preliminary specification based upon initial production run We believe this information is the best currently available. This product data sheet is subject to revisions once additional know-how is gained. We make no guarantee of results and assume no obligation liability whatsoever in connection with this information.
PERRY JOHNSON REGISTRARS, INC. Ready Containment, LLC 2300 South Dock Street, Suite 101, Building E, Palmetto, FL 34221 United States (This is a campus scheme. See Appendix for site specific details.) ISO 9001:2008 Design, Development and Manufacture of Flexible, Collapsible Storage Tanks for Fuels, Water, Other Liquids and Vapors, Spill Protection Berms, Liners, Air Inflatables, Tarpaulins, Flexible Shelters and Flotation Cells, Fuel and Water Distribution Systems Terry Boboige, President Perry Johnson Registrars, Inc. (PJR) 755 West Big Beaver Road, Suite 1340 Troy, Michigan 48084 (248) 358-3388 The use of the UKAS accreditation symbol is in respect to the activities covered by the Accreditation Certificate Number 0105. Effective Date: May 1, 2015 Expiration Date: April 30, 2018 Certificate No.: C2015-00573 Page 1 of 2
PERRY JOHNSON REGISTRARS, INC. 2300 South Dock Street, Suite 101, Building E, Palmetto, FL 34221 United States Administrative Activities; Development and Design 2350 South Dock Street, Building D, Palmetto, FL 34221 United States Manufacturing, Receiving, Quality Measurement, and Non Conforming Product Terry Boboige, President Perry Johnson Registrars, Inc. (PJR) 755 West Big Beaver Road, Suite 1340 Troy, Michigan 48084 (248) 358-3388 Certificate No.: C2015-00573 Page 2 of 2