INSTALL GUIDE OEM-GM(RS)-GM0-[OL-RS-GM0]-EN DOCUMENT NUMBER 555 REVISION DATE 05 FIRMWARE OEM-GM(RS)-GM0-[OL-RS-GM0] HARDWARE OL-RS-GM0 ACCESSORIES OL-LOADER (REQUIRED) NOTICE The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work. BEFORE INSTALLATION - Connect module to computer - Login to Weblink account - Flash firmware to module (module is not preloaded with firmware) - Use accessories accordingly (accessories are sold separately) Audio & Electronics
VEHICLE LIST - OF FEATURES MAKE MODEL YEAR BUICK INSTALL TYPE DATA IMMOBILIZER BYPASS X LOCK START/STANDALONE MOD. ARM OEM ALARM DISARM OEM ALARM DOOR LOCK DOOR UNLOCK PRIORITY UNLOCK TRUNK/HATCH RELEASE* TAILGATE WINDOW RELEASE HEATED SEATS CTRL PUDDLE LIGHT CTRL** TACHOMETER OUTPUT DOOR STATUS OUTPUT HOOD STATUS OUTPUT* TRUNK STATUS OUTPUT BRAKE PEDAL STATUS OUTPUT RAP SHUTDOWN CTRL Enclave STD key AT 08-6 Lucerne STD key AT 06- CADILLAC CHEVROLET CTS STD key AT 08- DTS STD key AT 06- Escalade / ESV / Hybrid STD key AT 07- Escalade EXT STD key AT 07- SRX STD key AT 07-09 Avalanche STD key AT 07- Caprice STD key AT - Captiva Sport STD key AT 08- Equinox STD key AT 07-09 Express STD key AT 08-6 Impala STD key AT 06- Monte Carlo STD key AT 06-09 Silverado / Hybrid STD key AT 07- Silverado / Hybrid Premium Package STD key AT 07- Suburban STD key AT 07- Tahoe / Hybrid STD key AT 07- Traverse STD key AT 09-6 Traverse with Auto Up/Down Windows STD key AT 09-6 * If equiped ** If activated in vehicle settings
VEHICLE LIST - OF FEATURES MAKE MODEL YEAR SUZUKI SATURN PONTIAC HUMMER GMC INSTALL TYPE DATA IMMOBILIZER BYPASS X LOCK REMOTE START ARM OEM ALARM DISARM OEM ALARM DOOR LOCK DOOR UNLOCK PRIORITY UNLOCK TRUNK/HATCH RELEASE* TAILGATE WINDOW RELEASE HEATED SEATS CTRL PUDDLE LIGHT CTRL** TACHOMETER OUTPUT DOOR STATUS OUTPUT HOOD STATUS OUTPUT* TRUNK STATUS OUTPUT BRAKE PEDAL STATUS OUTPUT RAP SHUTDOWN CTRL Acadia STD key AT 07-6 Acadia with Auto Up/Down Windows STD key AT 07-6 Savana STD key AT 08-6 Sierra STD key AT 07- Sierra Premium Package STD key AT 07- Yukon / XL / Denali / Hybrid STD key AT 07- H STD key AT 08-09 G8 STD key AT 08-09 Torrent STD key AT 07-09 Outlook STD key AT 07-0 Outlook with Auto Up/Down Windows STD key AT 07-0 Vue / Hybrid STD key AT 08-0 XL7 STD key AT 07-09 * If equiped ** If activated in vehicle settings
BOX CONTENTS - OF BOX CONTENTS MODULE T-HARNESS 0 PIN CONNECTOR VS BLUE BLACK 6 5 6 5 8 7 0 9 6 5 8 7 0 9 A B LED LED G F E PROGRAMMING BUTTON BLACK RF PORT/ WEBLINK PORT BLUE TELEMATIC PORT BLACK MS MS VS VS VS PIN CONNECTOR AFTERMARKET HOOD SWITCH AND CABLE BLACK 6 5 8 7 0 9 C D 9 0 7 8 5 6 WHITE WARNING STICKER WEBLINK CABLE (required accessory sold separately) WEBLINK CABLE MODULE WEBLINK PORT COMPUTER USB PORT PIN BLACK CABLE
TYPE - WIRE CHART - OF MAKE MODEL BUICK YEAR WIRE DESCRIPTION CONNECTOR NAME CADILLAC CONNECTOR COLOR CONNECTOR TYPE POSITION WIRE COLOR POLARITY MODULE LOCATION COMPONENT LOCATOR CHEVROLET Enclave 08-6 Lucerne 06- CTS 08- DTS 06- Escalade / ESV / Hybrid 07- Escalade EXT 07- Avalanche 07- Caprice - Equinox 07-09 Express 08-6 Impala 06- Monte Carlo 06-09 Silverado / Hybrid 07- Silverado / Hybrid Premium Package 07- Suburban 07- Tahoe / Hybrid 07- Traverse 09-6 Traverse with Auto Up/Down Windows 09-6 Parking Light ~ ~ ~ ~ LtBlue/Tan (-) At headlight switch ~
TYPE - WIRE CHART - OF MAKE MODEL YEAR WIRE DESCRIPTION CONNECTOR NAME GMC CONNECTOR COLOR CONNECTOR TYPE POSITION WIRE COLOR POLARITY MODULE LOCATION COMPONENT LOCATOR Acadia 07-6 Acadia with Auto Up/Down Windows 07-6 Savana 08-6 Sierra 07- Sierra Premium Package Yukon / XL / Denali / Hybrid 07-07- SUZUKI SATURN PONTIAC HUMMER H 08-09 G8 08-09 Torrent 07-09 Outlook 07-0 Outlook with Auto Up/Down Windows 07-0 XL7 07-09
TYPE - WIRING DIAGRAM - OF MODULE VEHICLE IGNITION SWITCH A B C G F E D RF PORT/WEBLINK PORT TELEMATIC PORT VS VS A A IGNITION CONNECTOR IGNITION HARNESS A 6 5 MS VS B PK CONNECTOR B VS B PK HARNESS 6 8 0 6 8 0 5 7 9 5 7 9 MS B A C VEHICLE 6 8 0 5 7 9 0 BROWN/BLACK - PARKING LIGHT (-) OUTPUT 0 GRAY - RAP SHUTDOWN (-) OUTPUT GRAY/GREEN - HORN (-) OUTPUT CONNECT IF NOT SUPPORTED BY DATA OPTIONAL PARKING LIGHT (-) DRIVER DOOR PIN (-) HORN (-) D 6 8 0 5 7 9 0 GRAY/WHITE - HOOD STATUS (-) INPUT WITHOUT OEM HOOD SWITCH: INSTALL AND CONNECT TO AFTERMARKET HOOD SWITCH AFTERMARKET HOOD SWITCH (-)
TYPE - WIRE CHART - OF CADILLAC MAKE MODEL YEAR WIRE DESCRIPTION CHEVROLET CONNECTOR NAME CONNECTOR COLOR CONNECTOR TYPE SATURN POSITION WIRE COLOR POLARITY MODULE LOCATION COMPONENT LOCATOR SRX STD key Captiva Sport cyl / Hybrid STD key Captiva Sport 6cyl STD key Vue cyl / Hybrid STD key Vue 6cyl STD key 07-09 08-08- 08-0 08-0 Ignition ~ Green 06 pin 0 Pink (+) Ignition connector ~ Passlock ~ Green 06 pin 05 White (+) Ignition connector ~ Ignition ~ Black 06 pin 0 Pink (+) Ignition connector ~ Passlock ~ Black 06 pin 05 White/Black (+) Ignition connector ~ Ignition ~ Green 06 pin 0 Pink (+) Ignition connector ~ Passlock ~ Green 06 pin 0 White/Black (+) Ignition connector ~ Ignition ~ Black 06 pin 0 Pink (+) Ignition connector ~ Passlock ~ Black 06 pin 05 White/Black (+) Ignition connector ~ Ignition ~ Green 06 pin 0 Pink (+) Ignition connector ~ Passlock ~ Green 06 pin 0 White/Black (+) Ignition connector ~
TYPE - WIRING DIAGRAM - OF MODULE CUT CONNECTOR FROM HARNESS VEHICLE IGNITION SWITCH A B C G F E D RF PORT/WEBLINK PORT TELEMATIC PORT VS PINK YELLOW IGNITION (+) PASSLOCK (+) A REFER TO WIRE CHART FOR WIRE COLOR AND LOCATION 5 6 A B 6 5 MS VS (NC) VS B IGNITION CONNECTOR PK CONNECTOR VS B 6 8 0 6 8 0 5 7 9 5 7 9 MS B PK HARNESS A C VEHICLE 6 8 0 5 7 9 0 BROWN/BLACK - PARKING LIGHT (-) OUTPUT 0 GRAY - RAP SHUTDOWN (-) OUTPUT GRAY/GREEN - HORN (-) OUTPUT CONNECT IF NOT SUPPORTED BY DATA OPTIONAL PARKING LIGHT (-) DRIVER DOOR PIN (-) HORN (-) D 6 8 0 5 7 9 0 GRAY/WHITE - HOOD STATUS (-) INPUT WITHOUT OEM HOOD SWITCH: INSTALL AND CONNECT TO AFTERMARKET HOOD SWITCH AFTERMARKET HOOD SWITCH (-)
MODULE PROGRAMMING PROCEDURE - OF 0 Close driver door. 07 Wait, LED will turn solid GREEN for seconds. (This may take up to minute.) 0 Re-open driver door to wake up data bus. 08 ACC OFF ON START Turn key to OFF position. 0 Insert key into ignition. 09 Module Programming Procedure completed. ACC OFF ON START 0 ACC OFF ON START Turn key to ACC position. 05 Wait, LED will turn solid RED. 06 ACC OFF ON START Turn key to ON position.
VALET MODE PROGRAMMING PROCEDURE - OF >> NOTE: In Valet Mode, the Remote starter is not functional. Keyless entry, Lock and Unlock will remain functional. See RF kit user manual for alternate valet mode programming. >> To exit valet mode: repeat steps to 5. 0 Time restriction. Complete next step within 7 seconds. 0 OFF ACC ON START Cycle ignition ON five times [5x OFF/ON] rapidly. ENGINE START STOP 0 Wait, LED will turn solid RED for seconds. 0 OFF ACC ON START Set ignition to OFF position. ENGINE START STOP 05 Valet Mode Programming Procedure completed.
MODULE NAVIGATION PROCEDURE - OF >> It is mandatory to exit the Module Navigation at the end of this procedure. Failure to exit the Module Navigation will drain vehicle battery. To exit the Module Navigation at any time: Follow STEP. 0 TO ACCESS THE OPTIONS: Press and hold programming button until LED turns solid RED. 0 To save and return to the OPTIONS: Press and hold programming button until LED turns solid RED. >> Module must be programmed to the vehicle. 05 [Y] IN THE OPTIONS: Press the programming button as many times as the option number indicates. LED will flash RED an equal amount of times continuously. [Y] LED will flash RED as many times as the current option number continuously. >> Use the Module Navigation Chart on the next page. 06 TO ACCESS THE SETTINGS: Press and hold programming button until LED turns solid GREEN. Configure every other setting and proceed to step. 0 OFF ACC ON START Set ignition to OFF position. 07 [Z] LED will flash GREEN as many times as the current (or default) setting number, continuously. MANDATORY: EXIT MODULE NAVIGATION. Press and hold programming button for 7 seconds. LED will flash RED rapidly. Release programming button. LED will turn OFF. ENGINE START STOP 0 TO ACCESS THE MENUS: Press and hold programming button until LED turns solid GREEN. 08 [Z] IN THE SETTINGS: Press the programming button as many times as necessary to access your setting. LED will flash GREEN an equal amount of times continuously. Module navigation completed. 0 [X] IN THE MENUS: Press the programming button as many times as the menu number indicates. LED will flash GREEN an equal amount of times continuously. 09 To return to the MENUS: exit the Module Navigation and redo the Module Navigation Procedure. >> Failure to exit the Module Navigation will drain vehicle battery.
MODULE NAVIGATION CHART - OF MODULE NAVIGATION CHART: NOTES [X] MENUS [Y] OPTIONS [Z] SETTINGS I II Default settings are listed in bold. Make sure the option is covered on the vehicle before attempting to change the setting. *Vehicle will shutdown when a door is opened. 0 CONFIGURATION 0 DISARM/UNLOCK BEFORE START 0 OFF 0 ON 0 RELOCK AFTER START 0 OFF 0 ON 0 RELOCK AFTER SHUTDOWN 0 OFF 0 ON 0 FORCE UNLOCK ALL ON FIRST PRESS 0 OFF 0 ON 05 TAKEOVER 0 ENABLE 0 DISABLE* 06 N/A 0 N/A 0 DISABLE 07 FACTORY KEYLESS RS SEQUENCE 0 N/A 0 LOCK + UNLOCK + LOCK 0 LOCK + LOCK + LOCK 0 0 MIN 0 05 MIN 0 0 MIN 08 MODULE RUN TIME 0 5 MIN 05 5 MIN 06 0 MIN 07 5 MIN 08 5 MIN 0 0 SEC 0 05 SEC 0 08 SEC 09 WAIT TO START DELAY 0 0 SEC 05 5 SEC 06 0 SEC 07 5 SEC 08 0 SEC 0 N/A 0 N/A N/A 0 N/A N/A 0 N/A N/A 0 N/A
MODULE NAVIGATION CHART - OF MODULE NAVIGATION CHART: NOTES [X] MENUS [Y] OPTIONS [Z] SETTINGS *Vehicle will shutdown when a door is opened. 0 DOUBLE LOCK HORN EVENT TRIGGER 0 LOCK + UNLOCK 0 LOCK + UNLOCK + START 0 CONFIGURATION 0 DOUBLE LOCK + START 0 0 msec 5 HORN CHIRPS WIDTH 0 5 msec 0 60 msec 0-07 Technical Support only 0 N/A 0 N/A
REMOTE STARTER ERROR CODES - OF REMOTE STARTER ERROR CODES: NOTES [X] NUMBER OF PARKING LIGHT FLASHES DIAGNOSTIC I II WARNING: The following applies only when the parking lights are connected and supported by the system. After a remote starter failure, the parking lights will flash [X] number times to indicate an error code. See table. 0 Foot brake is ON. 0 Hood is open. 05 Engine tach signal is lost. 06 System is in Valet Mode. 07 Vehicle is moving (VSS). 08 Glow plug timeout error. 09 RS not synchronized. Start vehicle with OEM key for 5 sec before trying a new RS sequence. 0 N/A N/A N/A N/A N/A 5 N/A 6 CAN communication failure during RS sequence.
MODULE DIAGNOSTICS - OF TEST MODULE LED STATUS DIAGNOSTIC I II III DURING PROGRAMMING DURING REMOTE START WITH IGNITION OFF Flashing RED Solid RED Flashing GREEN Solid GREEN then OFF OFF Flashing RED Solid RED Flashing GREEN Solid GREEN then OFF OFF Flashing RED Solid RED Flashing GREEN Solid GREEN then OFF OFF Missing/wrong information from firmware or vehicle. Module waiting for more vehicle information. Additional steps required to complete module programming. Module correctly programmed. No activity or module already programmed. Module incorrectly programmed. Module incorrectly programmed. Module correctly programmed and operational. Reset in progress. Invalid ground when running status from remote starter. Module incorrectly programmed or connected. Module not programmed. Waiting for more vehicle information. False ground when running status from remote starter. Reset in progress. Module at rest and ready for a remote start sequence.
MODULE RESET PROCEDURE - OF 0 Disconnect all connectors from module except the BLACK 0-PIN connector. 07 Reconnect all connectors. 0 Disconnect the BLACK 0-PIN connector. 08 Repeat programming procedure. 0 PRESS AND HOLD the module s programming button while connecting the BLACK 0-PIN connector. >> Failure to follow procedure may result with a DTC or a CHECK ENGINE error message. 0 Wait, LED will flash RED. RELEASE programming button. 05 LED will turn RED for seconds. 06 Module RESET completed.
INSTALLATION CHECKLIST - OF CHECKLIST WARNING: Vehicle engine will start many times. Test in a well ventilated area. Close all vehicle doors, hood and trunk. Press LOCK button three times [x] rapidly on the OEM keyfob to remote start vehicle. Question : Does the vehicle remote start? YES: Go to next step. NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists. Press LOCK button three times [x] rapidly on the OEM keyfob to shut down vehicle. Question : Does the vehicle shut down? YES: Go to next step. NO: Repeat step. If the problem persists, press on the brake pedal once [x] to shut down the vehicle and call technical support. 5 RAP Shutdown test Question : Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown? YES: Go to next step. NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists. 6 Open hood. 7 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step. 8 Press LOCK button three times [x] rapidly on the OEM keyfob to remote start vehicle. Question : Does the vehicle remote start? YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test. NO: Go to next step. 9 Close hood. 0 Enter vehicle and close the doors. Press LOCK button three times [x] rapidly on the OEM keyfob to remote start vehicle. Wait for the vehicle to start. Press brake pedal. Question 5: Does the vehicle shut down? YES: Go to next step. NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support. Exit vehicle. 5 Installation checklist completed.