TECHNICAL DATA SHEET PRODUCT NAME : FLOW METERS SECTION 1 PRODUCT IDENTIFICATION & COMPANY Product Name Flow Meters ( FLOWTECH & BLUE & WHITE) Supplier EZ Water Technology Address 1647 S, Main St. Suite 200 Milpitas CA 95035, USA Telephone No 1.888.EZ.TECH7 (888.398.3247) E-mail info@ezwatertechnology.com Web www.ezwatertechnology.com SECTION 2 DK800S SERIES Glass Rotameters DK800 is used for measuring tiny flow. With nice shape, and light-weighted, easy to install and repair the taper pipe and float can be changed without separating the whole machine into pieces. The flow scale is clear and acute, which is widely used in the chemical, petroleum, medical, food, environmental protection and scientific research departments, for measuring one phase non-pulsating fluid(liguid or gas) Temperature Limit: 120100 Accuracy: ±2.5% Working pressure limited: 1.0MPa
Flow Range Measurement Model Water Air L/h L/h 3 DK800S-3 0.15~1.5 0.18~1.8 0.36~3.6 4 DK800S~4 0.25~2.5 0.5~5 0.8~8 1.6~16 6~60 6 DK800S~6 0.5~5 10~100 1.2~12 25~250 2~20 50~500 2.5~25 80~800 4~40 100~1000 6~60 180~1800 10~100 24~2400 16~160 300~3000 20~200 350~3500 430~4300 Float Material Agate 304SS SECTION 3 Plastic Flowmeters Features LZS SERIES Injection molded, for clean water Easy to read scale. Silkscreened with black ink for optimum contrast Direct exposure to sunlight is not recommended Max working pressure 6bar Max temperature 60C Accuracy's+/-5% O-ring material:viton ABS float DN Body SAN material(pc is optional) (mm) (mm) L B1 B2 B3 15 220 20 26 51 25 230 32 39 60 32 290 40 49 72 50 350 63 73 98 65 420 75 88 122 100 510 180mm 8-ø18 125 510 210mm 8-ø18 150 510 240mm 8-ø22 Model Measure Range m3/h Glue Male Female Elbow 4~40 L/h 1/2"NPT 6~60 L/h 3/4"NPT 10~100 L/h 15 LZS-15 16~160 L/h 25~250 L/h ø20 G1/2" G1/2" 40~400 L/h 60~600 L/h 100~1000 L/h 0.1~1 G3/4" 25 LZS-25 0.16~1.6 ø32 3/4"NPT 3/4"NPT G3/4" 0.25~2.5 32 LZS-32 0.4~4 G1" ø40 1"NPT 0.6~6 1"NPT G1" 0.4~4 G2" 50 LZS-50 0.6~6 2"NPT ø63 2"NPT 1~10 G2 1.6~16 5~25 65 LZS-65 8~40 ø75 2½"NPT 12~60 LZS-100 12~60 100 flange 18~90 ø110 180mm 8-ø18 20~120 125 LZS-125 12~60 ø110 flange 18~90 210mm 8-ø18 LZS-150 20~120 flange 240mm 8-ø22 18-90 150 20-120 25-150 30-180 ø110
SECTION 4 T-5000 SERIES Differential Pressure Gauges FEATURES For air and non-combustible, compatible gases Easy to read precision scale Low cost Compact in size Zero adjustment screw Over pressure protection Durable and rugged housing The T-5000 series is designed for high accuracy application, it quickly indicates low air or non-corrosive gas pressures, either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. The T-5000 gauge meets the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems and pressures in fluid amplifier or fluidic systems. It also checks gas-air ratio controls and automatic valves, and monitors blood and respiratory pressures in medical care equipment. TECHNICAL FEATURES Medium: Air and non-combustible, compatible gases (natural gas option available) Dial size: 4 (DN100) Housing material: Die cast aluminum case and bezel, with acrylic cover Accuracy: ±2% of full scale Pressure limit: 1) -20 in Hg. to 15 psig (-0.677 bar to 1.034 bar) 2) MP option; 35 psig (2.41 bar) 3) HP option; 80 psig (5.52 bar) Overpressure: Relief plug opens at approximately 25 psig (1.72 bar) Temperature limit: -6.67 to 60 C / -28 C with low temperature option Mounting: Diaphragm in vertical position Process connection: 1/8" female NPT duplicate high and low pressure taps one pair side and one pair back
SECTION 5 KF951/KF952 SERIES Alarm Switch KF951 : High Limit KF952 : Low Limit Spare part of KF951/952 is optional of Z-500,Z-500t,Z-6000,K-500,LZS,Z-560,FA40S series flowmeter. Dependable Measurement KF951 and KF952 can be installed on the pipeline flowmeters, can be alarmed in any position, easy to installation, dependable,especially to add install it to the equipment. KF951 and KF952 can be alarmed in any position. When the float reach up or over to settle position for the flow, it will put out signal, then contact point will be closed. Supply and Function KF951, High Limit When magnetic float reach up or over to the settle position, the contact point will be closed and when the magnetic float lower than settle position, contact position will be cut off. KF952, Low Limit When magnetic float reach up or lower than settle position, contact point will be closed and when magnetic float over than settle position, contact point will be cut off. Technical Parameter Working Pressure : max.dc24/ac24 Operating Current : max.0.3 A Permanent Current : max. DC 0.1A Rupturing Capacity : max.1va Forward Resistance : <200 mω Insulating Impedance :>10 9 Ω Working Temperature : 0 o C ~ +55 o C Protection Grade : IP65 Lag Behind : 4mm Size : 45x20x45
SECTION 6 KF700P SERIES Plastic Electromagnetic Flowmeters Specifications Diameter: DN25 ~ DN150 Electrode material: 316L, Hb, Hc, Ti, Ta, Pt Lining material: PTFE, PFA, F46 Medium: conductive liquids Medium conductivity: 20μs/cm Accuracy: ± 0.5% RS, ± 1.0% RS Converter Model: MF710 / MF740 Flow rate range: 0.1m / s-10m / s Working temperature: -25 ~ +100 Working pressure: 0.6MPa ~ 1.0MPa (base on diameter) Output signal: 4 ~ 20mA, frequency / pulse Power supply: 220VAC, 24VDC Dimension L D H Bolt length 25 68 73 113 138 40 90 95 135 175 50 95 108 148 184 65 102 124 164 191 80 110 138 178 200 100 130 158 198 220 125 150 190 230 240 150 195 220 260 300 Flow range min flow m3/h Flow Range Selection(m3/h) 25 0.08 0.16,0.2,0.25,0.3,0.4,0.5,0.6,0.8,1.0,1.2,1.6,2.0,2.5 32 0.2 0.4,0.5,0.6,0.8,1.0,1.2,1.6,2.0,2.5,3.0,4.0,5.0,6.0 40 0.3 0.6,0.8,1.0,1.2,1.6,2.0,2.5,3.0,4.0,5.0,6.0,8.0,10.0 50 0.5 1.0,1.2,1.6,2.0,2.5,3.0,4.0,5.0,6.0,8.0,10.0,12.0,14.0,16.0 65 0.8 1.6,2.0,2.5,3.0,4.0,5.0,6.0,8.0,10.0,12.0,16.0,20.0,25.0 80 1.2 2.5,3.0,4.0,5.0,6.0,8.0,10.0,12.0,16.0,25.0,30,40 100 2 4.0,5.0,6.0,8.0,10.0,12.0,16.0,20,25,30,40,50,60,70 125 3.5 6.0,8.0,10.0,12.0,16.0,20,25,30,40,50,60,80,100,120 150 5 10.0,12.0,16.0,20,25,30,40,50,60,80,100,120,160
SECTION 7 Paddle Wheel Flowmeters Product Description Turbine flowmeter Low cost digital flowmeters For all liquids without impurity KF510 SERIES Turbine flowmeter, paddle wheel flowmeter Turbine flow transducer adapts to measure the liquid rate and total flowrate of low viscosity, it can be widely used in the fields of petrol, chemical industry, metallurgy, scientific research for measuring or control, several putput and display methods can be selected. 1>high accuracy with 1%, 1.5% 2>pulse, 4-20mA, totalizer and instant flow, RS485, quantitative control, alarm switch 3>24VDC, battery. DN FlowRange Male Press Temp. (mm) M3/H BSP (MPa) (C) Compact type 10 0.1-1.8 8-Mar 15 0.2-4 2-Jan 1.0 20 0.3-6 4-Mar 25 0.5-12 1 80 0.8 1 40 1.5-24 50 Feb-40 2 Remote (insert type) 10 0.1-1.8 15 0.2-4 20 0.3-6 25 0.5-12 40 0.5-12 50 Feb-40 65 May-50 80 Aug-80 0.8 80C 100 10-100 125 15-150 150 35-350 200 50-500 250 80-800 300 100-1000
SECTION 8 VG30G SERIES VA30G glass rotameter are the new products of our company, compared with the other domestic products of the same type, it has advantages of high measuring precision, good interchangeability, multiple connection ways, especially the value of value of flow rate of the flow mater is in millimeter scale mark, which is capable of providing actual flow scale according to the temperature, pressure, density, and viscosity of different flows, solving the problem of indication correction. As for the ways of connection. The loose flange structure is available, with both conventional type and corrosion-proof type. VA30S Pipe thread connection L B A D G Weight 15 344 270 25 38 1/2 F/NPT 1/2 G 1.4 25 348 236 40 55 1 F/NPT 1 G 2.1 40 370 226 50 70 1½ F/NPT 1½ G 3.6 50 380 226 60 89 2 F/NPT 2 G 6.0 No. Material 1 304SS, 316*, PTFE 2 304 3 304,316* SECTION 9 VA30S SERIES VA30S glass rotameter are the new products of our company, compared with the other domestic products of the same type, it has advantages of high measuring precision, good interchangeability, multiple connection ways, especially the value of value of flow rate of the flow mater is in millimeter scale mark, which is capable of providing actual flow scale according to the temperature, pressure, density, and vicosity of different flows, solving the problem of indication correction. As for the ways of connection. The loose flange structure is available, with both conventional type and corrosion-proof type. VA30S Pipe thread connection L B A D G Weight 15 344 270 25 38 1/2 F/NPT 1/2 G 1.4 25 348 236 40 55 1 F/NPT 1 G 2.1 40 370 226 50 70 1½ F/NPT 1½ G 3.6 50 380 226 60 89 2 F/NPT 2 G 6.0 No. Material 1 304SS, 316*, PTFE 2 304 3 304,316* 1647 S, Main St. Suite 200 Milpitas CA 95035, USA Toll Free Phone: 1.888.EZ.TECH7 (888.398.3247) Toll Free Fax: 1.888.EZ.TECH8 (888.398.3248) Email: info@ezwatertechnology.com Web: www.ezwatertechnology.com