PRODUCT NAME ORDER # PAGE # ANTENNAS 890-960 Yagi Antenna UBR-Y9000 w/ lead 0580 450 Mhz Yagi Antenna UBR-Y4000 w/ lead 05803 806-960 & 70-990 MHz Dual Band Omni Antenna 09835 3 806-960 & 70-500 Yagi Multiband Antenna 09834 4 SURGE PROTECTOR Coaxial Surge Protector CSP-BNFNF-50 05804 Gas Tube Replacement Fuse GT5090 063 5 TOWERS (HARDWARE IS INCLUDED WITH ALL TOWERS) Tower Exposure Overview 6 5G Tower Top w/.5 " Diameter Steeple 0900 45G 0 Top Section for 45 Series Tower 0494 7 Tower Mid Section 5G-MS 0899 Tower Mid Section 45G-MS 0493 8 Tower Base Section 45G-BS 049 BASE PLATES Tower Base Plate- Hinged 835 Tower Base Plat- Tilt 0058 Tower Base Plate- Fixed 04347 COAX 40-SFX Jumper Coax 00 0 400-SFX Transmission Line Coax 009 400-HPX Transmission Line Coax 0090 TNC-Male Coax Connector UBR-40-SFX 0098 SMA-Male Coax Connector UBR-40-SFX 00985 0- N-Female Coax Connector UBR-400-SFX 000 -Custom coax is availabe in any length & termination --Ask us about our bulk order discounts 9
ELECTRICAL SPECIFICATIONS Frequency Range: 890-960 MHz Impedance: 50 ohms Gain: 0 ± 0.5 dbi Maximum Input Power: 00 W Polarization: VERT/HORZ Front to Back Ratio: 0 db Horizontal Half Power Beam Width: 56 Vertical Half Power Beam Width: 46 VSWR: >.5 MECHANICAL SPECIFICATIONS Length: 609 mm Rated Wind Velocity: 60 m/s (30 mph) Connector: N-Female Radiator Composition: Aluminum Antenna Color: Black Lightning Protection: DC Ground
ELECTRICAL SPECIFICATIONS MECHANICAL SPECIFICATIONS Frequency Range: 450-470 MHz Dimensions: Length: 4 Width:.8 Impedance: 50 ohms Rated Wind Velocity: 60 m/s (50 mph) VSWR: <.5 Gain: 0 dbi Maximum Input Power: 00 W Polarization: VERT/HORZ Lightning Protection: DC Ground Operating Temperature: -40 F +58 F Connector: N-Female Radiator Composition: Aluminum Antenna Color: Black
Features: Integral N-female type connector Operational Frequencies: 806-960 MHz or 70-990 MHz 4.6/6.3 dbi, bracket included SPECIFICATIONS Frequency Range 806-960MHz 70-990 MHz Gain 4.6 dbi 6.3 dbi Front to Back Ratio VSWR < >5 db Horizontal Beam Width H 360 Vertical Beam Width E 3 E Operating Temperature -40 C +70 C Input Impedance 50 ohms Maximum Power 50 W Connector Type/Termination N-Female Wind Velocity 56 m/s Polarization Vertical Lightning Protection DC Open STRUCTURE Length 0.5 in./ 360 mm Depth 57 mm Weight.66 lbs (0.3 kg) Diameter.09 in./ 5 mm CONSTRUCTION Antenna Cap: Glass Steel Cap Color: White Heavy Duty Bracket U-Bolt Included
SPECIFICATIONS Frequency Range 806-960(MHz) 70-500(MHz) Gain 9 dbi Front to Back Ratio >0 db VSWR <.5 (3dB)Half Power Beam Width 90 H plane 60 E plane F/B >5 db Input Impedance 50 ohms Maximum Power >50 W Connector Type N-Female Wind Velocity 4 MPH Polarization Vertical Lightning Protection DC Ground Ambient Temperature 40-60 Installation Mast Tower STRUCTURE Length Width Depth Weight Hold Pole Diameter.8 in./ 300 mm 8.46 in./ 5 mm.4 in./ 57 mm 650(g),.43 lbs 45±3mm (.77in. ±3mm) CONSTRUCTION Heavy duty stainless steel construction Steel mounting bracket 360 weld elements to boom Black polyester powder coat finish Radome Material: ABS Radome Color: Black
SPECIFICATIONS VALUE Bulkhead Mounting Nominal DC Spark Over Voltage 90 Volts ± 0% Maximum Peak Power 500 Watts Impedance 50 ohms Discharge Capacity: (ka, 8/0µS wave) 0/0 Frequency Range 0~3000 Mhz Discharge Voltage 90 V Insertion Loss < 0.5 db Return Losses > 0 db > 0 db VSWR <.5@DC-3000MHz Nom. Discharge Current 8/0 µs - 0 x 5 ka Residual Voltage kv/ µs <600 Min. Insulation Resistance > 0 MΩ Operation Temperature -40 to +76 F (-40 to +80 C) Waterproof IP 67 A drop-in replacement for other major brands- field proven for excellent performance
Exposure B Tower 5 Tower 45 Height of Tower 0 0 0 0 30 Maximum Sq. Ft of Load at Top (CaAa) 4.4 6.6 43.7 9..4 Flat Plate Area (sq. ft.) 8. 3.7 4.5 6.3 6.4 Weight of Top Load (lbs) w/no ice 570 345 455 00 495 Number of / coax on top 4 7 3 Foundation plan dimension (ft.) 4 4 5 6.5 6.5 Foundation Thickness (ft.).5.5.5.5.5 Total Concrete (cubic yards) 0.9 0.9.4.3.3 Size of Anchor Bolts req d per leg (in.) Number of Anchor Bolts req d per leg Exposure C Tower 5 Tower 45 Height of Tower 0 0 0 0 30 Maximum Sq. Ft of Load at Top (CaAa).5.0 35.5 6. Flat Plate Area (sq. ft.) 6.4 0.6 9.9.3 3.4 Weight of Top Load (lbs) w/no ice 495 80 5 80 330 Number of / coax on top 3 9 6 Foundation plan dimension (ft.) 4.0 4.0 5.0 6.5 6.5 Foundation Thickness (ft.).5.5.5.5.5 Total Concrete (cubic yards) 0.9 0.9.4.3.3 Size of Anchor Bolts req d per leg (in.) / / / 5/8 5/8 Number of Anchor Bolts req d per leg
SPECIFICATIONS MATERIAL /4 Rnd x 6GA HRP&O /4 Steel tubing with 5/6 Z-Bar Side rails: -/4 heavy duty steel tubing Rod bracing: continuous solid steel 5/6 solid serpentine zig zag Outer diameter tube cap: -/4-4 gauge Number of bays: 5 bracing and swaged Equilateral face: -/ Cap: 8 above apex side rails Walls: 6 gauge Interchangeable.5 triangular design Double bolted: bolts at each connection 9.5" Long "U" Brkt GA HRP&O Size Finish See below-sizing by model ASTM A 3 Hot- Dip Galvanized " Rnd X 6GA HRP&O Weight 35 lbs. TOWER TOP SECTION MODELS 4 " 6GA HRP&O -0900 Uberluft Tower Top Section 5G-TS Length: 9 9-0695 Uberluft Tower Top Section 5G Series Length: 0 x 8 Mast with -/4 bushing 0'.50-0494 Uberluft Tower Top Section 45G-TS Length: 0 TOWER HARDWARE KIT (INCLUDED) Uberluft Tower Top Section Hardware Kit Includes hex bolts, lock washers, and nuts. 5 6 " RND
SPECIFICATIONS MATERIAL /4 Rnd x 6GA HRP&O /4 Steel tubing with 5/6 Z-Bar Side rails: -/4 heavy duty steel tubing Rod bracing: continuous solid steel 5/6 solid serpentine zig zag Outer diameter tube cap: -/4-4 gauge Number of bays: 5 bracing and swaged Equilateral face: -/ Cap: 8 above apex side rails Walls: 6 gauge Interchangeable.5 triangular design Double bolted: bolts at each connection Size See below-sizing by model Finish ASTM A 3 Hot- Dip Galvanized Weight 35 lbs. (for Mid-Section) TOWER MID & BASE-SECTION MODELS -0899 Uberluft Tower Mid Section 5G-MS Length: 0-0493 Uberluft Tower Mid Section 45G-MS Length: 0-049 Uberluft Tower Base Section 45G-BS Length: 5 TOWER HARDWARE KIT (INCLUDED) Uberluft Mid-Section Hardware Kit Includes hex bolts, lock washers, and nuts. 0' 5 6 "Ø HR View 5.3 0.00 Scale : View 4" X 6GA 5 6 " Rnd Scale :
4 3 REVISIONS REV. DESCRIPTION DATE APPROVED.560 4.880.30 B.80 7.440 B 4.880 3.070 *ALIGN HOLES IN SWEDGE TUBES TO CENTER HOLE IN BASE PLATE AS SHOWN CENTER SWEDGE TUBES ON OVER HOLES IN BASE PLATE TOP VIEW TYP. 5.563 A 3 3.560.560 ISO VIEW EXPLODED 4.880.30 FRONT VIEW REVISIONS REV. DESCRIPTION DATE APPROVED 4.880 REVISIONS.30 REV. DESCRIPTION DATE APPROVED BASE ASSEMBLY A.80.80 4 3 7.440 7.440 B DO NOT SCALE DRAWING SCALE: :4 WEIGHT: 3.49 LBS SHEET OF B 3.070 4.880 3.070 4.880 *ALIGN HOLES IN SWEDGE TUBES TO CENTER HOLE IN BASE PLATE AS SHOWN *ALIGN HOLES IN SWEDGE TUBES TO CENTER HOLE IN BASE PLATE AS SHOWN TOP VIEW CENTER SWEDGE TUBES ON OVER HOLES IN BASE PLATE CENTER SWEDGE TUBES ON OVER HOLES IN BASE PLATE 5.563 5.563 TOP VIEW TYP. TYP. FRONT VIEW FRONT VIEW A A BASE ASSEMBLY BASE ASSEMBLY 3 3 DO NOT SCALE DRAWING SCALE: :4 WEIGHT: 3.49 LBS SHEET OF DO NOT SCALE DRAWING SCALE: :4 WEIGHT: 3.49 LBS SHEET OF
CONSTRUCTION SPECIFICATIONS Description Material Inches Metric Inner Conductor Stranded bare copper 0.056.4 mm Dielectric Foam polyethylene 0.50 3.8 mm Outer Conductor Multi-ply aluminum tape 0.55 3.93 mm Overall Braid Tinned copper (90% coverage) 0.78 6.0 mm Jacket UV resistant thermoplastic elastomer 0.40 6.0 mm ELECTRICAL SPECIFICATIONS Performance Property Units Value Velocity of Propogation % 86 Dieletric Constant na.4 Time Delay ns/ft (ns/m). (3.97) Impedance ohms 50 Capacitance pf/ft (pf/m) 4. (79.4) Inductance uh/ft (uh/m).060 (.0) Shielding Effectiveness db >9 ENVIRONMENTAL SPECIFICATIONS Performance Property F C Installation Temp. Range -40 /+85-40 /+85 Storage Temp. Range -94 /+85-70 /+85 Operating Temp. Range -40 /+85-40 /+85 MECHANICAL SPECIFICATIONS Performance Property Inches Metric Bend Radius: Installation.75 9. mm Bend Radius: Repeated.5 63.5 mm Bending Moment.5 0.7 mm Performance Property lb/ft kg/m Weight.034 0.05 Tensile Strength 80 36.3 Flat Plate Crush 3 0.3 Voltage Withstand Volts DC 500 Jacket Spark Volts RMS 5000 Peak Power kw 5.6 DC Resistance Inner Conductor ohms/000ft(km) 4.8 (4.) Outer Conductor ohms/000ft(km) 3.89 (.8) Stranded BC PE Foam Dielectric Multi-ply AL Tape UV Resistant Black TPE Tinned Copper Shield (90% Coverage) FREQUENCY BAND (MHZ) 50 0 450 750 900 500 800 000 500 5800 db/00ft 3.6 4.4 6.3 8.3 9..8 3.0 3.8 5.5 4.4 db/00m.9 4.4 0.8 7. 9.8 38.9 4.8 45. 50.9 80.
CONSTRUCTION SPECIFICATIONS Description Material Inches Metric Inner Conductor Stranded bare copper 0.08.74 mm Dielectric Foam polyethylene 0.85 7.0 mm Outer Conductor Multi-ply aluminum tape 0.9 7.90 mm Overall Braid Tinned copper (90% coverage) 0.30 8.0 mm Jacket UV resistant thermoplastic elastomer 0.405 0.0 mm ELECTRICAL SPECIFICATIONS Performance Property Units Value Velocity of Propogation % 86 Dieletric Constant na.38 Time Delay ns/ft (ns/m).0 (3.9) Impedance ohms 50 Capacitance pf/ft (pf/m) 3.9 (78.40) Inductance uh/ft (uh/m).060 (.) Shielding Effectiveness db 9 Voltage Withstand Volts DC 500 Jacket Spark Volts RMS 8000 Peak Power kw 6 DC Resistance Inner Conductor ohms/000ft(km).07 (3.5) Outer Conductor ohms/000ft(km).65 (5.4) ENVIRONMENTAL SPECIFICATIONS Performance Property F C Installation Temp. Range -40 /+85-40 /+85 Storage Temp. Range -94 /+85-70 /+85 Operating Temp. Range -40 /+85-40 /+85 MECHANICAL SPECIFICATIONS Performance Property Value Bend Radius: Installation.0 5.4 mm Bend Radius: Repeated 4.0 0.6 mm Bending Moment lb/ft (Nm) 0.375 0.5 Performance Property lb/ft kg/m Weight.88 0.3 Tensile Strength 60 7.6 Flat Plate Crush 0 0.36 Stranded BC PE Foam Dielectric Multi-ply AL Tape UV Resistant Black TPE Tinned Copper Shield (90% Coverage) FREQUENCY BAND (MHZ) 50 0 450 750 900 500 800 000 500 5800 db/00ft.8. 33 4.3 4.7 6. 6.8 7. 8. 3.0 db/00m 6. 7.4 0.7 4.0 5.4 0..3 3.6 6.6 4.6
CONSTRUCTION SPECIFICATIONS Description Material Inches Metric Inner Conductor Solid copper clad aluminum 0.08.74 mm Dielectric Foam polyethylene 0.85 7.4 mm Outer Conductor AL Multi-ply aluminum tape 0.9 7.39 mm ENVIRONMENTAL SPECIFICATIONS Performance Property F C Installation Temp. Range -40 /+85-40 /+85 Storage Temp. Range -94 /+85-70 /+85 Operating Temp. Range -40 /+85-40 /+85 Overall Braid Tinned copper (90% coverage) 0.30 8.3 mm Jacket UV resistant thermoplastic elastomer 0.405 0.9 mm MECHANICAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS Performance Property Units Value Velocity of Propogation % 86 Dieletric Constant na.38 Time Delay ns/ft (ns/m).0 Impedance ohms 50 Capacitance pf/ft (pf/m) 3.9 Inductance uh/ft (uh/m).060 Shielding Effectiveness db >90 Voltage Withstand Volts DC 500 Jacket Spark Volts RMS 8000 Peak Power kw 6 DC Resistance Inner Conductor ohms/000ft(km).39 Outer Conductor ohms/000ft(km).65 Performance Property Value Bend Radius: Installation.00 5.4 mm Bend Radius: Repeated 4.0 0.6 mm Bending Moment lb/ft (Nm).5 0.68 Performance Property lb/ft kg/m Weight.068 0.0 Tensile Strength 60 7.6 Flat Plate Crush 40 0.7 Solid CCA PE Foam Dielectric Multi-ply AL Tape UV Resistant Black TPE Tinned Copper Shield (90% Coverage) FREQUENCY BAND (MHZ) 50 0 450 750 900 500 800 000 500 5800 db/00ft.5.9.7 3.5 3.9 5. 5.7 6.0 6.8 0.8 db/00m 5.0 6. 8.9.6.8 6.8 8.6 9.6. 35.5