Table of Contents Part Number Index Parts Manual RC4615 (540 RPM) and RCM4615 (1000 RPM) Rotary Cutters Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! 39757 Cover illustration may show optional equipment not supplied with standard unit. Copyright 2017 Printed 08/04/17 334-305P
Table of Contents Table of Contents Part Number Index Section 1: Introduction...4 Using This Manual...4 Manual Replacement Information...4 Manual Revisions...4 Touch-up Paint...4 Hardware Legend...5 Replacement Hardware...5 Serial Numbers...5 Part Number Service Coding...5 Section 2: Decks & Hitches...6 Blade Carrier...6 Deck Center Section...8 Deck Wing Section...10 Hitch A-Frame...12 Hitch Ball Coupler...14 Hitch Bar Tite...16 Hitch Performance...18 Hitch Pintel...20 Hitch Standard Pivoting Clevis...22 Leveling Rod & Wing Turnbuckle...24 Lights 3 Inch (LED)...26 Splitter Box Sliding Cover...28 Section 3: Axles...30 Axle Center...30 Axle Wing...32 Hub Assembly (330-938K)...34 Section 4: Chain Guards...36 Chain Guards Front Double...36 Chain Guards Front Single...38 Chain Guards Rear Double...40 Chain Guards Rear Single...42 Section 5: Drivelines...44 Driveline Center (826-818C) Comer...44 Driveline CV 1.38 1000 RPM (826-644C) Weasler...46 Driveline CV 1.38 1000 RPM W/ Overrunning Clutch (826-793C)...48 Driveline CV 1.75 1000 RPM (826-645C)...50 Driveline CV 540 RPM (826-643C) Weasler...52 Driveline Wing (826-811C) Comer...54 Driveline Wing (826-812C) Comer...56 Driveline Wing (826-812C) Walterscheid...58 Section 6: Gearboxes (1000)...60 Gearbox 1000 RPM (826-318C)...60 Gearbox 1000 RPM (826-319C)...62 Gearbox 1000 RPM (826-725C)...64 Gearbox Divider 1000 RPM (826-521C) Comer...66 Gearbox Divider 1000 RPM (826-521C) ITG...68 Section 6: Gearboxes (540)...70 Gearbox (826-721C)...70 Gearbox 540 RPM (826-650C)...72 Gearbox Divider 540 RPM (826-520C) Comer...74 Gearbox Divider 540 RPM (826-520C) ITG...76 Section 7: Hydraulics...78 Hydraulic Components...78 Hydraulic Cylinder (810-312C) Lion...80 Hydraulic Cylinder (810-312C) Midway...82 Hydraulic Cylinder (810-624C) Lion...84 Section 8: Decals...86 Decals...86 Section 9: Options & Accessories...88 Lights 3 Inch (LED) Retro-Fit (334-577A)...88 Manual Winch Wing Deck...90 Rotary Cutter Tire Options...92 Part Number Index...94 Copyright 2017 All rights reserved Printed 08/04/17 Great Plains Manufacturing, Inc. provides this publication as is without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. Great Plains Manufacturing, Incorporated Trademarks The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains All other brands and product names are trademarks or registered trademarks of their respective holders. Printed in the United States of America. 334-305P - 2-08/04/17
Table of Contents Part Number Index Alphabetized Table of Contents Selected Models A Axle Center...30 Axle Wing...32 B Blade Carrier...6 C Chain Guards Front Double...36 Chain Guards Front Single...38 Chain Guards Rear Double...40 Chain Guards Rear Single...42 Lights 3 Inch (LED) Retro-Fit (334-577A)...88 M Manual Winch Wing Deck...90 R Rotary Cutter Tire Options...92 S Splitter Box Sliding Cover...28 D Decals...86 Deck Center Section...8 Deck Wing Section...10 Driveline Center (826-818C) Comer...44 Driveline CV 1.38 1000 RPM (826-644C) Weasler...46 Driveline CV 1.38 1000 RPM W/ Overrunning Clutch (826-793C)...48 Driveline CV 1.75 1000 RPM (826-645C)...50 Driveline CV 540 RPM (826-643C) Weasler...52 Driveline Wing (826-811C) Comer...54 Driveline Wing (826-812C) Comer...56 Driveline Wing (826-812C) Walterscheid...58 G Gearbox (826-721C)...70 Gearbox 1000 RPM (826-318C)...60 Gearbox 1000 RPM (826-319C)...62 Gearbox 1000 RPM (826-725C)...64 Gearbox 540 RPM (826-650C)...72 Gearbox Divider 1000 RPM (826-521C) Comer...66 Gearbox Divider 1000 RPM (826-521C) ITG...68 Gearbox Divider 540 RPM (826-520C) Comer...74 Gearbox Divider 540 RPM (826-520C) ITG...76 H Hitch A-Frame...12 Hitch Ball Coupler...14 Hitch Bar Tite...16 Hitch Performance...18 Hitch Pintel...20 Hitch Standard Pivoting Clevis...22 Hub Assembly (330-938K)...34 Hydraulic Components...78 Hydraulic Cylinder (810-312C) Lion...80 Hydraulic Cylinder (810-312C) Midway...82 Hydraulic Cylinder (810-624C) Lion...84 L Leveling Rod & Wing Turnbuckle...24 Lights 3 Inch (LED)...26 08/04/17-3 - 334-305P
Table of Contents Part Number Index 334-305P - 4-08/04/17
Table of Contents Part Number Index 08/04/17-5 - 334-305P
Blade Carrier Table of Contents Part Number Index 37636 334-305P - 6-08/04/17
Blade Carrier Table of Contents Part Number Index Section 2: Decks & Hitches Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 5. 5. 6. Dwg 37636 326-430H 802-277C 803-170C 804-147C 820-138C 820-137C 820-112C 318-586A Image No. DISHPAN 15 CENTERS W/HVY HUB BLD BLT 1 1/8-12X3.44 W/.25KEY NUT HEX TOP LOCK 1 1/8-12 PLT WASHER FLAT 1 HARD ASTMF436 PN CUTTER BLADE 1/2X4X31 CCW CUTTER BLADE 1/2X4X25 CCW CUTTER BLADE 1/2X4X25 CW BLADE BOLT KIT 08/04/17-7 - 334-305P
Table of Contents Deck Center Section Part Number Index 37637 334-305P - 8-08/04/17
Table of Contents Part Number Index Section 2: Decks & Hitches Deck Center Section Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 35. 36. 36. 36. 36. 37. 37. 38. 39. 39. 40. 41. 42. Dwg 37637 318-211H 318-212H 318-920S 326-922D 331-187D 331-205D 331-552V 331-555S 331-615H81 331-616H81 331-632H 331-633H 802-005C 802-007C 802-015C 802-053C 802-057C 802-138C 802-214C 802-383C 802-967C 803-169C 803-198C 803-255C 803-263C 803-299C 804-007C 804-009C 804-010C 804-016C 804-022C 816-481C 817-455C 826-486C 826-497C 826-520C 826-521C 826-643C 826-644C 826-645C 826-793C 826-650C 826-725C 826-818C 837-066C 837-079C 837-076C 840-273C 842-243C Image No. WLDMT. SKID SHOE RH. WLDMT. SKID SHOE LH. MANUAL STORAGE CONTAINER KIT GB MOUNT PLATE RH FRONT DEFLECTOR LH FRONT DEFLECTOR SLIDING SHIELD ASSY, 50 GB GEARBOX BEARING BLOCK MNT CENTER DECK WO/DR GREEN CENTER DECK W/DR GREEN SLIDING SHIELD SPLITTER MNT 46 FRONT SPLITTER SHIELD RC4615 HHCS 1/4-20X1 GR5 HHCS 5/16-18X3/4 GR5 RHSNB 3/8-16X1 GR5 HHCS 5/8-11X1 3/4 GR5 HHCS 5/8-11X2 1/4 GR5 HHCS 5/16-18X2 ¼ GR5 RHSNB 1/2-13X1 1/4 GR5 HHCS 3/4-10X3 GR5 HHCS M8X1.25X35 GR8.8 NUT HEX FLG LOCK 1/2-13 PLT NUT HEX WHIZ 3/8-16 PLT NUT HEX NYLOCK 1/4-20 NUT HEX FLANGE LOCK 5/8-11 PLT NUT HEX FLG TOP LK 3/4-10 PLT WASHER FLAT 1/4 SAE PLT WASHER LOCK SPRING 5/16 PLT WASHER FLAT 5/16 USS PLT WASHER FLAT 1/2 SAE PLT WASHER LOCK SPRING 5/8 PLT MANUAL STORAGE CONTAINER KNOB 1/2-13 MALE THD 2 3/8OD COMER U0.125.7003.00 DIPSTICK COMER VENT #8.6.7.00269 DIV BOX 540RPM 1 3/4-20 DIV BOX 1000RPM 1 3/4-20 DRVLN C6 42 1.38-6 CV DRVLN C6 42 1.38-21 CV DRVLN C6 47 1.75-20 CV DRVLN C6 39 1.38-21 CV ORCLTCH GBOX RC50 1:1.60 STD GBOX RC50 1.15:1 STD DRVLN C4 11 1.75-20 FX CLTCH DRIVELINE SHIELD CONE, 2 PIECE DRVLN SHLD CONE, 2 PIECE LONG SHIELD SPACER PLUG LP 3" ID RUBBER HHCS M8X1.25X20 GR8.8 THD-LCK 540 RPM 1000 RPM 540 RPM 1000 RPM 1000 RPM 1000 RPM 540 RPM 1000 RPM Used only with driveline 826-793C For ITG Box only 08/04/17-9 - 334-305P
Table of Contents Deck Wing Section Part Number Index 37638 334-305P - 10-08/04/17
Table of Contents Part Number Index Section 2: Decks & Hitches Deck Wing Section Ref. Part No. Part Description Comments Revision 1. 2. 2. 3. 4. 5. 5. 5. 5. 6. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 18. 18. 18. 19. 19. 20. 21. 22. Dwg 37638 326-922D 330-068D 330-101D 330-504H 330-505L 331-684H81 331-685H81 331-686H81 331-687H81 331-792H 331-793H 802-022C 802-155C 802-383C 802-466C 803-014C 803-198C 803-299C 804-009C 804-010C 804-013C 826-486C 826-721C 826-319C 826-650C 826-317C 826-811C 826-812C 837-066C 840-273C 842-243C Image No. GB MOUNT PLATE DEFLECTOR RH DEFLRCTOR LH HINGE ROD ASSY HINGE ROD DECK RH WING WO/DR GREEN DECK RH WING W/DR GREEN DECK LH WING WO/DR GREEN DECK LH WING W/DR GREEN BEVELED SKID SHOE RH BEVELED SKID SHOE LH HHCS 3/8-16X1 1/2 GR5 RHSNB 3/8-16X1 1/4 GR5 HHCS 3/4-10X3 GR5 PLOW 3/8-16X1 1/4 GR5 NUT HEX 3/8-16 PLT NUT HEX WHIZ 3/8-16 PLT NUT HEX FLG TOP LK 3/4-10 PLT WASHER LOCK SPRING 5/16 PLT WASHER FLAT 5/16 USS PLT WASHER LOCK SPRING 3/8 PLT COMER U0.125.7003.00 DIPSTICK GBOX RC50 1:1.60 REV GBOX RCM50 1:1.21 REV GBOX RC50 1:1.60 STD GBOX RCM50 1:1.21 STD DRVLN C4 50 1.75-20 FX CLTCH DRVLN C5 48 1.75-20 FX CLTCH DRIVELINE SHIELD CONE, 2 PIECE PLUG LP 3" ID RUBBER HHCS M8X1.25X20 GR8.8 THD-LCK RH WING LH WING RH WING RH WING LH WING LH WING RH WING LH WING RH WING 540 RPM RH WING 1000 RPM LH WING 540 RPM LH WING 1000 RPM CAT 4 CAT 5 08/04/17-11 - 334-305P
Hitch A-Frame Table of Contents Part Number Index 37649 334-305P - 12-08/04/17
Hitch A-Frame Table of Contents Part Number Index Section 2: Decks & Hitches Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. Dwg 37649 331-087D 331-088D 331-089D 331-561H 331-629H 800-001C 802-096C 802-106C 802-155C 802-235C 803-014C 803-020C 803-031C 803-168C 804-011C 804-013C 804-015C 804-027C 804-028C 890-182C N\A 891-524C Image No. PTO HANGER BUSHING PTO HANGER STOP PTO HANGER ADJUSTABLE JACK MOUNT HITCH W/ ADJ JACK MNT GREASE ZERK STRAIGHT 1/4-28 HHCS 1-8X2 1/2 GR5 RHSNB 1/2-13X1 1/2 GR5 RHSNB 3/8-16X1 1/4 GR5 HHCS 1-8X5 GR5 NUT HEX 3/8-16 PLT NUT HEX 1/2-13 PLT NUT HEX 1-8 PLT NUT HEX TOP LOCK 1-8 PLT WASHER FLAT 3/8 USS PLT WASHER LOCK SPRING 3/8 PLT WASHER LOCK SPRING 1/2 PLT WASHER LOCK SPRING 1 PLT WASHER FLAT 1 USS PLT SAFETY CHAIN 10000 LB SIDEWIND JACK 7000 LB Available with sidewind jack 08/04/17-13 - 334-305P
Hitch Ball Coupler Table of Contents Part Number Index 26568 334-305P - 14-08/04/17
Table of Contents Part Number Index Section 2: Decks & Hitches Hitch Ball Coupler Ref. Part No. Part Description Comments Revision 1. 2. 3. Dwg 26568 330-335A 330-348H 802-053C 803-304C Drawing Image Number 2 5/16" BALL HITCH ASSEMBLY * 2 5/16" BALL HITCH WELDMENT HHCS 5/8-11X1 3/4 GR5 NUT HEX WHIZ 5/8-11 PLT Complete assembly 08/04/17-15 - 334-305P
Hitch Bar Tite Table of Contents Part Number Index 26569 334-305P - 16-08/04/17
Hitch Bar Tite Table of Contents Part Number Index Section 2: Decks & Hitches Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. Dwg 26569 330-333A 318-358H 318-834H 330-271H 330-563D 330-564D 330-975H 800-001C 802-053C 802-070C 802-074C 802-205C 803-168C 803-181C 803-258C 803-301C 803-304C 804-025C 804-028C 804-171C 805-105C 890-862C 330-974K Drawing Image Number BAR TITE HITCH * SHAFT WELDMENT WELDMENT HITCH CLEVIS SWIVEL RECEIVER HITCH WEAR PLATE WIDE FORMED HITCH SUPPORT WIDE BAR TITE WIDE TOP GREASE ZERK STRAIGHT 1/4-28 HHCS 5/8-11X1 3/4 GR5 HHCS 3/4-10X6 GR5 HHCS 1-8X6 1/2 GR5 HHCS 1-8X5 1/2 GR5 NUT HEX TOP LOCK 1-8 PLT NUT HEX FLANGE LOCK 3/4-10 PLT NUT HEX FLG LOCK 1-8 GR B PLT NUT HEX SLOTTED 1 1/2-6 PLT NUT HEX WHIZ 5/8-11 PLT WASHER FLAT 3/4 SAE PLT WASHER FLAT 1 USS PLT WASHER FLAT 1.50 HARD ASTMF436 PIN COTTER 1/4 X 2 1/2 PLT BUSHING 1.50ODX1.00IDX1.25 BAR TITE HITCH WIDE Complete assembly 08/04/17-17 - 334-305P
Table of Contents Hitch Performance Part Number Index 39286 334-305P - 18-08/04/17
Table of Contents Part Number Index Section 2: Decks & Hitches Hitch Performance Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. Dwg 39286 334-045A 330-271H 331-543D 334-046H 334-048H 800-001C 802-053C 802-075C 802-079C 803-201C 803-258C 803-301C 803-304C 804-013C 804-171C 805-105C 890-836C 890-850C Image No. LP PERFORMANCE HITCH * SWIVEL RECEIVER HITCH HOLDER HITCH CLEVIS HITCH YOKE GREASE ZERK STRAIGHT 1/4-28 HHCS 5/8-11X1 3/4 GR5 HHCS 1-8X7 GR5 HHCS 3/8-16X1 1/4 GR5 NUT HEX COUPLER 3/8-16X1 3/4 NUT HEX FLG LOCK 1-8 GR B PLT NUT HEX SLOTTED 1 1/2-6 PLT NUT HEX WHIZ 5/8-11 PLT WASHER LOCK SPRING 3/8 PLT WASHER FLAT 1.50 HARD ASTMF436 PIN COTTER 1/4 X 2 1/2 PLT BUSHING 1 1/4X1X1/2 HRD BUSHING 1 1/4X1X5/8 Complete assembly 08/04/17-19 - 334-305P
Hitch Pintel Table of Contents Part Number Index 27673 334-305P - 20-08/04/17
Hitch Pintel Table of Contents Part Number Index Section 2: Decks & Hitches Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. Dwg 27673 330-501A 330-499H 802-053C 802-729C 803-304C 803-304C 890-806C Drawing Image Number PINTLE HITCH * PINTLE RECEIVER HHCS 5/8-11X1 3/4 GR5 HFS 5/8-11X2 1/2 GR8 PLT NUT HEX WHIZ 5/8-11 PLT NUT HEX WHIZ 5/8-11 PLT PINTLE HOOK SQ.BASE BDB1250-15 Complete assembly 08/04/17-21 - 334-305P
Table of Contents Hitch Standard Pivoting Clevis Part Number Index 27672 334-305P - 22-08/04/17
Table of Contents Part Number Index Section 2: Decks & Hitches Hitch Standard Pivoting Clevis Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. Dwg 27672 330-498A 330-163D 330-497H 330-500H 802-053C 802-110C 802-356C 803-024C 803-258C 803-304C Drawing Image Number STANDARD HITCH * SPACER HITCH CLEVIS WELDMENT YOKE HITCH 3615 HHCS 5/8-11X1 3/4 GR5 HHCS 1-8X9 GR5 HHCS 5/8-11X8 1/2 GR5 NUT LOCK 5/8-11 PLT NUT HEX FLG LOCK 1-8 GR B PLT NUT HEX WHIZ 5/8-11 PLT Complete assembly 08/04/17-23 - 334-305P
Table of Contents Leveling Rod & Wing Turnbuckle Part Number Index 27674 334-305P - 24-08/04/17
Table of Contents Part Number Index Section 2: Decks & Hitches Leveling Rod & Wing Turnbuckle Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. Dwg 27674 318-008H 330-470H 330-471K 800-001C 802-098C 802-205C 802-538C 803-032C 803-075C 803-084C 803-168C 803-265C 804-025C 804-030C 805-083C 805-109C 890-974C Drawing Image Number WLDMT. LEVEL ROD SHORT LEVEL ROD LONG LEVEL ROD GREASE ZERK STRAIGHT 1/4-28 HHCS 1-8X4 1/2 GR5 HHCS 1-8X5 1/2 GR5 HSHCS 5/16-18X1 3/4 NUT HEX JAM 1 1/4-7 PLT NUT HEX JAM 7/8-9 NUT HEX NYLOCK 5/16-18 PLT NUT HEX TOP LOCK 1-8 PLT NUT HEX COUPLER 7/8-9 x 5 WASHER FLAT 3/4 SAE PLT WASHER LOCK 1 1/4 SPRING PLT PIN CLEVIS 3/4 X 1 1/2 PIN COTTER 1/8 X 1 1/4 PLT TRNBCKL, 1BORE W/SWIVEL 9.5 08/04/17-25 - 334-305P
Table of Contents Lights 3 Inch (LED) Part Number Index 37671 334-305P - 26-08/04/17
Table of Contents Part Number Index Section 2: Decks & Hitches Lights 3 Inch (LED) Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 14. 14. 14. 14. 14. 14. 14. 15. 16. 17. 18. Dwg 37671 334-450L 331-499A 330-965D 330-966D 330-967D 331-471S 331-472S 800-060C 802-015C 802-027C 802-224C 803-078C 803-209C 803-255C 804-007C 891-522C J-37-R J-37-A J-AC1-15-B 891-523C J-37-R J-37-A J-AC1-15-B 891-529C 891-530C 891-531C 891-532C Image No. FOLDING CUTTER LIGHT KIT 3" FOLDING CUTTER LIGHT KIT 3" * LIGHT MNT LIGHT GUARD LIGHT MNT CLAMP RH LIGHT ASSY LH LIGHT ASSY CABLE TIE.19X14.25 3DIA 50LB RHSNB 3/8-16X1 GR5 HHCS 3/8-16X4 1/2 GR5 HHCS 1/4-20X1 1/4 GR5 NUT LOCK 3/8-16 NYLON INSERT NUT FLANGE LOCK 3/8-16 PLT NUT HEX NYLOCK 1/4-20 WASHER FLAT 1/4 SAE PLT DUAL LED LIGHT LH RED LED LENS MODULE AMBER LED LENS MODULE BLACK LENS COVER DUAL LED LIGHT RH RED LED LENS MODULE AMBER LED LENS MODULE BLACK LENS COVER RH LIGHT WIRE HARNESS 8' LH LIGHT WIRE HARNESS 8' ENHANCE MODULE LEAD WIRE HARNESS 8' S/N D001092N+ Lights are now standard (Complete Assembly) S/N D001091N- Lights were optional Complete light assembly (Goes on 331-472S) Red lens Amber lens Black lens Complete light assembly (Goes on 331-471S) Red lens Amber lens Black lens 08/04/17-27 - 334-305P
Table of Contents Splitter Box Sliding Cover Part Number Index 37650 334-305P - 28-08/04/17
Table of Contents Part Number Index Section 2: Decks & Hitches Splitter Box Sliding Cover Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. Dwg 37650 Image No. 331-076D SLIDING SHIELD 331-552V SLIDING SHIELD ASSY, 50 GB 331-554H SLIDING SHIELD GB MNT, 50/60GB 331-555S GEARBOX BEARING BLOCK MNT 801-248C PAN HD 1/4-20X3/4 PHILLIPS SS 802-301C HHCS 1/4-20X1/2 GR5 802-843C HHCS M6X1X20 18-8 SS 803-255C NUT HEX NYLOCK 1/4-20 804-006C WASHER LOCK SPRING 1/4 PLT 804-009C WASHER LOCK SPRING 5/16 PLT 804-010C WASHER FLAT 5/16 USS PLT 804-034C WASHER FLAT 1/4 SAE SS 817-936C HANDLE GRAB 4 1/8WIDE1 1/2TALL 842-243C HHCS M8X1.25X20 GR8.8 THD-LCK 891-485C WS-10 GUIDE RAIL 891-487C FLOATING ZINC BEARING BLOCK J200UM-01-10.4 REPLACEMENT LINER With Liners 08/04/17-29 - 334-305P
Axle Center Table of Contents Part Number Index 37655 334-305P - 30-08/04/17
Axle Center Table of Contents Part Number Index Section 3: Axles Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. Dwg 37655 330-607H 330-609S 330-938K 331-099H 331-569H 334-448H 334-449S 800-001C 800-073C 801-229C 802-082C 802-099C 802-110C 802-205C 803-019C 803-168C 803-169C 803-381C 804-016C 805-058C 807-271C 815-425C 891-177C Image No. PIVOT PIN TRAILING ARM ASY PIVOT PIN TRAILING ARM HUB 5 BOLT COMPLETE TRAILING ARM CENTER CENTER AXLE TRAILING ARM PIVOT PIN TRAILING ARM PIVOT PIN ASY GREASE ZERK STRAIGHT 1/4-28 GREASE ZERK 1/4-28 X 90-DEG SCREW SLOTTED HEX 1/4-28X3/16 HHCS 1/2-13X1 3/4 GR5 HHCS 1/2-13X3 1/4 GR5 HHCS 1-8X9 GR5 HHCS 1-8X5 1/2 GR5 NUT LOCK 1/2-13 PLT NUT HEX TOP LOCK 1-8 PLT NUT HEX FLG LOCK 1/2-13 PLT NUT HEX JAM SLOTTED 1 1/4-7 WASHER FLAT 1/2 SAE PLT PIN COTTER 3/16 X 2 SPRING COMP 3.20OD.63W 5.5L SPINDLE, DUAL BOLT-ON 7/8-14 BHG 1.50ODX1.25X1.38 S/N D001067N- S/N D001067N- S/N D001068N+ S/N D001068N+ S/N D001067N- S/N D001068N+ 08/04/17-31 - 334-305P
Axle Wing Table of Contents Part Number Index 37656 334-305P - 32-08/04/17
Axle Wing Table of Contents Part Number Index Section 3: Axles Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. Dwg 37656 330-608H 330-610S 330-938K 331-574H 331-575H 331-794H 331-795L 334-464H 334-466S 800-001C 800-073C 801-229C 802-082C 802-099C 802-357C 802-915C 803-019C 803-168C 803-169C 803-381C 804-016C 805-058C 807-271C 815-491C 891-177C Image No. PIVOT PIN TRAILING ARM WG ASY PIVOT PIN TRAIL ARM WG HUB 5 BOLT COMPLETE WING AXLE RH WING AXLE LH TRAILING ARM WING SPINDLE AND HUB ASSY WING TRAILING ARM PIVOT PIN WING TRAILING ARM PIV PIN ASY GREASE ZERK STRAIGHT 1/4-28 GREASE ZERK 1/4-28 X 90-DEG SCREW SLOTTED HEX 1/4-28X3/16 HHCS 1/2-13X1 3/4 GR5 HHCS 1/2-13X3 1/4 GR5 HHCS 1-8X6 GR5 HHCS 1-8X5 GR8 PLT SPTHD NUT LOCK 1/2-13 PLT NUT HEX TOP LOCK 1-8 PLT NUT HEX FLG LOCK 1/2-13 PLT NUT HEX JAM SLOTTED 1 1/4-7 WASHER FLAT 1/2 SAE PLT PIN COTTER 3/16 X 2 SPRING COMP 3.20OD.63W 5.5L SINGLE AXLE SPINDLE, WING BHG 1.50ODX1.25X1.38 S/N D001067N- S/N D001067N- S/N D001068N+ S/N D001068N+ S/N D001067N- S/N D001068N+ 08/04/17-33 - 334-305P
Table of Contents Hub Assembly (330-938K) Part Number Index 37676 334-305P - 34-08/04/17
Table of Contents Part Number Index Section 3: Axles Hub Assembly (330-938K) Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. Dwg 37676 200-001D 330-938K 800-080C 802-779C 803-029C 803-310C 804-055C 805-246C 815-243C 816-497C 822-020C 822-021C 822-033C 822-034C 815-242C Image No. HUB GREASE CAP HUB 5 BOLT COMPLETE GREASE ZERK 1/4-28 THD FORMING HUB STUD 1/2-20X1.88 GR5 NUT HEX SLOTTED 7/8-14 PLT NUT HEX 1/2-20 X 5/8 HIGH WASHER SPINDLE - 7/8 PIN COTTER 5/32 X 1 3/4 LG HUB 5-BOLT W/CUPS/STUDS SEAL 1.75ID CR17617 BRG CUP LM-67010 BRG CONE 1.25ID LM-67048 BRG CUP LM-48510 BRG CONE LM-48548 HUB 5-BOLT CASTING 08/04/17-35 - 334-305P
Table of Contents Chain Guards Front Double Part Number Index 37661 334-305P - 36-08/04/17
Table of Contents Part Number Index Section 4: Chain Guards Chain Guards Front Double Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 9. 10. 11. 12. 13. 14. Dwg 37661 330-483A 318-108D 318-336D 318-337D 318-876K 318-879K 330-474K 330-475K 331-441D 331-445D 331-444D 331-447D 802-015C 803-198C 890-175C 890-341C Image No. CHNGRD FRONT DOUBLE * ROUND ROD 1/4 X 36 ROUND ROD 1/4 X 73 ROUND ROD 1/4 X 25 ASSY. DUAL CHAINGUARD FRT.CTR ASSY.DUAL CHAINGUARD FRT.WING CHNGRD DBL FRT RH CHNGRD DBL FRT LH FRONT WING DOUBLE CHAINGUARD CHNGRD DBL FRT LH CHNGRD DBL FRT RH CHNGRD DBL FRT CNT RHSNB 3/8-16X1 GR5 NUT HEX WHIZ 3/8-16 PLT CHAIN 5/16 GR 43 X 6 LINKS PLT CHAIN WELD 5/16 GR 43 X 5 LINK Complete assembly FOR RH GUARD (330-474K) 08/04/17-37 - 334-305P
Table of Contents Chain Guards Front Single Part Number Index 37660 334-305P - 38-08/04/17
Table of Contents Part Number Index Section 4: Chain Guards Chain Guards Front Single Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 9. 10. 11. 12. 13. 14. Dwg 37660 330-481A 318-108D 318-223K 318-226K 318-264D 318-336D 330-472K 330-473K 331-440D 331-443D 331-442D 331-446D 802-015C 803-198C 890-175C 890-341C Image No. CHNGRD FRONT SINGLE * ROUND ROD 1/4 X 36 ASSY. CHAINGUARD FRT. CTR. ASSY. CHAINGUARD FRT. WING ROD 1/4 X 28 ROUND ROD 1/4 X 73 CHNGRD SGL FRT RH CHNGRD SGL FRT LH FRONT WING CHAINGUARD CHNGRD SGL FRT LH CHNGRD SGL FRT RH CHNGRD SGL FRT CNT RHSNB 3/8-16X1 GR5 NUT HEX WHIZ 3/8-16 PLT CHAIN 5/16 GR 43 X 6 LINKS PLT CHAIN WELD 5/16 GR 43 X 5 LINK Complete assembly FOR RH GUARD (330-472K) 08/04/17-39 - 334-305P
Table of Contents Chain Guards Rear Double Part Number Index 37663 334-305P - 40-08/04/17
Table of Contents Part Number Index Section 4: Chain Guards Chain Guards Rear Double Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Dwg 37663 330-495A 318-107D 318-641D 318-895D 330-119D 330-214K 330-477K 802-015C 803-198C 890-175C 890-393C Image No. CHNGRD REAR DOUBLE * ROUND ROD 1/4 X 31 1/2 ROUND ROD.25 X 9 CHNGRD REAR CNTR INNER DBL CHNGRD DBL REAR OUT CHNGRD CNTR REAR INNER DBL CHNGRD DBL REAR OUT RHSNB 3/8-16X1 GR5 NUT HEX WHIZ 3/8-16 PLT CHAIN 5/16 GR 43 X 6 LINKS PLT CHAIN WELD 5/16 GR 43 X 7-LINK Complete assembly 08/04/17-41 - 334-305P
Table of Contents Chain Guards Rear Single Part Number Index 37662 334-305P - 42-08/04/17
Table of Contents Part Number Index Section 4: Chain Guards Chain Guards Rear Single Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Dwg 37662 330-493A 318-107D 318-641D 318-876D 330-107D 330-208K 330-476K 802-015C 803-198C 890-175C 890-393C Image No. CHNGRD REAR SINGLE * ROUND ROD 1/4 X 31 1/2 ROUND ROD.25 X 9 BRACKET CHNGRD CNTR INNER CHNGRD SGL REAR OUT CHNGRD CNTR REAR INNER CHNGRD SGL REAR OUT RHSNB 3/8-16X1 GR5 NUT HEX WHIZ 3/8-16 PLT CHAIN 5/16 GR 43 X 6 LINKS PLT CHAIN WELD 5/16 GR 43 X 7-LINK Complete assembly 08/04/17-43 - 334-305P
Table of Contents Driveline Center (826-818C) Comer Part Number Index 37510 334-305P - 44-08/04/17
Table of Contents Part Number Index Section 5: Drivelines Driveline Center (826-818C) Comer Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. Dwg 37510 826-818C 141.026.357.1 180.016.780 190.000.032 190.000.047 170.016.630.1 155.150.724 190.000.016 151.016.896.1 146.264.024.1 165.000.589 180.014.022 151.016.037.1 180.019.019 180.019.018 151.018.228.1 180.019.014 180.019.115 180.019.116.1 165.000.548 Image No. DRVLN C4 11 1.75-20 FX CLTCH * COMER YOKE COMPLETE CO CROSS JOURNAL SET CO CIRCLIP CO GREASE NIPPLE COMER YOKE, OUTER COMER SHAFT, SPLINED COMER ROLL PIN, INNER TUBE CO INNER YOKE COMER CLUTCH, COMPLETE ASSY COMER TAPERED PIN SET 1 3/4 COMER SPRING COMER YOKE, FLANGED COMER BUSH RPBY 180.019.340 COMER CLUTCH SUPPORT COMER INNER PLATE COMER INTERMEDIATE PLATE COMER PRESSURE PLATE COMER BOLT WITH NUT M10X100 Complete assembly 08/04/17-45 - 334-305P
Table of Contents Part Number Index Driveline CV 1.38 1000 RPM (826-644C) Weasler (Applies to RCM4615 only) 37911 334-305P - 46-08/04/17
Table of Contents Part Number Index Section 5: Drivelines Driveline CV 1.38 1000 RPM (826-644C) Weasler (Applies to RCM4615 only) Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. Dwg 37911 826-644C 26-15120 68810-1003 03-15570 26-16033 99-24406 19-15135 97-25023 96-24406 98-24406 03-15316 55051-1817 11-14988 11-15180 93-25023 92-24406 91-25023 Drawing Image Number DRVLN C6 42 1.38-21 CV * WE SSL/AUTO-LOK REPAIR KIT WE WWCV AUTO-LOK YOKE ASM WE AB8/AW25EBL CROSS KIT WE WWCV CENTER HOUSING WE YOKE&SHAFT (1.69-20 SPLINE) WE GUARD REPAIR KIT WE OUTER GUARD WE INNER GUARD WE YOKE, TUBE & SLIP SLEEVE WE 55EBL CROSS KIT WE YOKE WE LOCK NUT.625-11 WE BOLT.625-11 X 3.00L GR8 WE JOINT&SHFT HALF ASM W/GUARD WE JOINT&TUBE HALF ASM W/GUARD WE GUARD SET Complete assembly 08/04/17-47 - 334-305P
Table of Contents Part Number Index Driveline CV 1.38 1000 RPM W/ Overrunning Clutch (826-793C) (Applies to RCM4615 only) 35997 334-305P - 48-08/04/17
Table of Contents Part Number Index Section 5: Drivelines Driveline CV 1.38 1000 RPM W/ Overrunning Clutch (826-793C) (Applies to RCM4615 only) Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Dwg 35997 826-793C 26-15120 68810-1003 03-15570 26-16033 99-24406 97-26654 19-15135 13-10021 13-10022 96-26654 98-26654 03-15316 39-10039 Drawing Image Number DRVLN C6 39 1.38-21 CV ORCLTCH * WE SSL/AUTO-LOK REPAIR KIT WE WWCV AUTO-LOK YOKE ASM WE AB8/AW25EBL CROSS KIT WE WWCV CENTER HOUSING WE YOKE&SHAFT (1.69-20 SPLINE) WE OUTER GUARD WE GUARD REPAIR KIT WE SAFETY SIGN WE SAFETY SIGN WE INNER GUARD WE YOKE, TUBE & SLIP SLEEVE WE 55EBL CROSS KIT WE OVERRUNNING THRST CLTCH ASM Complete assembly 08/04/17-49 - 334-305P
Table of Contents Part Number Index Driveline CV 1.75 1000 RPM (826-645C) (Applies to RCM4615 only) 37912 334-305P - 50-08/04/17
Table of Contents Part Number Index Section 5: Drivelines Driveline CV 1.75 1000 RPM (826-645C) (Applies to RCM4615 only) Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. Dwg 37912 826-645C 26-13387 68810-1005 03-15570 26-16033 99-24406 19-15135 97-25075 96-25075 98-25075 03-15316 55051-1817 11-14988 11-15180 93-25075 92-25075 Drawing Image Number DRVLN C6 47 1.75-20 CV * WE SSL/AUTO-LOK REPAIR KIT WE WWCV AUTO-LOK YOKE ASM WE AB8/AW25EBL CROSS KIT WE WWCV CENTER HOUSING WE YOKE&SHAFT (1.69-20 SPLINE) WE GUARD REPAIR KIT WE OUTER GUARD WE INNER GUARD WE YOKE, TUBE & SLIP SLEEVE WE 55EBL CROSS KIT WE YOKE WE LOCK NUT.625-11 WE BOLT.625-11 X 3.00L GR8 WE JOINT&SHFT HALF ASM W/GUARD WE JOINT&TUBE HALF ASM W/GUARD Complete assembly 08/04/17-51 - 334-305P
Table of Contents Part Number Index Driveline CV 540 RPM (826-643C) Weasler (Applies to RC4615 only) 37916 334-305P - 52-08/04/17
Table of Contents Part Number Index Section 5: Drivelines Driveline CV 540 RPM (826-643C) Weasler (Applies to RC4615 only) Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. Dwg 37916 826-643C 26-15120 68810-1004 03-15570 26-16033 99-24406 19-15135 97-24406 96-24406 98-24406 03-15316 55051-1817 11-14988 11-15180 93-24406 92-24406 91-24406 Drawing Image Number DRVLN C6 42 1.38-6 CV * WE SSL/AUTO-LOK REPAIR KIT WE WWCV AUTO-LOK YOKE ASM WE AB8/AW25EBL CROSS KIT WE WWCV CENTER HOUSING WE YOKE&SHAFT (1.69-20 SPLINE) WE GUARD REPAIR KIT W/ CHAINS WE OUTER GUARD WE INNER GUARD WE YOKE, TUBE & SLIP SLEEVE WE 55EBL CROSS KIT WE YOKE WE LOCK NUT.625-11 WE BOLT.625-11 X 3.00L GR8 WE JOINT&SHFT HALF ASM W/GUARD WE JOINT&TUBE HALF ASM W/GUARD WE GUARD SET Complete assembly 08/04/17-53 - 334-305P
Table of Contents Driveline Wing (826-811C) Comer Part Number Index 37917 334-305P - 54-08/04/17
Table of Contents Part Number Index Section 5: Drivelines Driveline Wing (826-811C) Comer Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. Dwg 37917 Image No. 826-811C DRVLN C4 50 1.75-20 FX CLTCH * 141.026.357.1 COMER YOKE COMPLETE 180.016.780 CO CROSS JOURNAL SET 146.264.024.1 COMER CLUTCH, COMPLETE ASSY 8180.016.237 CO RETAINING COLLAR OUTER TUBE 8180.014.240 RPBY 180.014.240 8180.016.238 CO RETAINING COLLAR INNER TUBE 142.260.5197621 CO COMPLETE GUARD W/MANUAL 165.000.589 COMER TAPERED PIN SET 1 3/4 180.014.022 COMER SPRING 151.016.037.1 COMER YOKE, FLANGED 180.019.019 COMER BUSH 180.019.018 RPBY 180.019.340 151.018.228.1 COMER CLUTCH SUPPORT 180.019.014 COMER INNER PLATE 180.019.115 COMER INTERMEDIATE PLATE 180.019.116.1 COMER PRESSURE PLATE 165.000.548 COMER BOLT WITH NUT M10X100 8123.360.504.11 CO HALF FEMALE SHFT W/GUARDING 8123.460.105611 CO HALF MALE SHAFT W/GUARD 190.000.098 COMER DANGER LABEL OUTER TUBE 190.000.099 COMER DANGER LABEL GUARD OUTER 190.000.903 CO LABEL W/CUSTOMER CODE Complete assembly 08/04/17-55 - 334-305P
Table of Contents Driveline Wing (826-812C) Comer Part Number Index 37918 334-305P - 56-08/04/17
Table of Contents Part Number Index Section 5: Drivelines Driveline Wing (826-812C) Comer Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. Dwg 37918 Image No. 826-812C DRVLN C5 48 1.75-20 FX CLTCH * 141.028.195.1 COMER YOKE COMPLETE 180.018.581 CO CROSS JOURNAL SET 190.000.035 N/A 190.000.047 CO GREASE NIPPLE 151.018.241.1 COMER YOKE OUTER 190.000.243 COMER OUTER TUBE ROLL PIN 150.281.5197810 CO COMPLETE OUTER TUBE W/LABEL 159.280.168 COMER INNER TUBE 190.000.271 COMER ROLL PIN FOR INNER TUBE 151.018.242.1 COMER INNER YOKE 146.284.020.1 COMER CLUTCH, DISC COMPLETE 180.018.251 COMER RETAINING COLLER INNER 180.014.240 COMER BOLT 180.018.252 COMER RETAINING COLLER INNER 142.286.2519821 CO COMPLETE GUARD W/MANUAL 165.000.589 COMER TAPERED PIN SET 1 3/4 180.014.022 COMER SPRING 151.018.016.1 COMER YOKE, FLANGED 180.019.019 COMER BUSH 180.019.018 RPBY 180.019.340 151.018.228.1 COMER CLUTCH SUPPORT 180.019.014 COMER INNER PLATE 180.019.115 COMER INTERMEDIATE PLATE 180.019.116.1 COMER PRESSURE PLATE 165.000.548 COMER BOLT WITH NUT M10X100 142.283.2509821 CO HALF FEMALE GUARD 142.287.2199821 CO HALF MALE GUARD 123.386.190.01 CO HALF FEMALE SHFT W/GUARDING 123.486.343.01 CO HALF MALE SHAFT W/GUARDING 190.000.098 COMER DANGER LABEL OUTER TUBE 190.000.099 COMER DANGER LABEL GUARD OUTER 180.018.393 COMER CAP OUTER TUBE, PLASTIC 180.018.435 COMER INNER CAP 190.000.932 CO LABEL W/CUSTOMER CODE Complete assembly available only in cross journal set (#2) 08/04/17-57 - 334-305P
Table of Contents Part Number Index Driveline Wing (826-812C) Walterscheid 37919 334-305P - 58-08/04/17
Table of Contents Part Number Index Section 5: Drivelines Driveline Wing (826-812C) Walterscheid Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. Dwg 37919 826-812C 325027 190224 097133 304046 323524 397493 097140 395980 125142 087276 371708 371709 399469 365305 818-552C 818-540C 396295 380371 359474 125140 107542 Image No. DRVLN C5 48 1.75-20 FX CLTCH * WS YOKE 1 3/4-20 SPL.I.C. 2500 WS CROSS & BEARING KIT WS INBOARD YOKE S4 WS SPRING PIN 10 X 90 WS INNER PROFILE S4L WS OUTER PROFILE S5L WS INBOARD YOKE S5 WS FRICTION CLUTCH WS GUARD CONE 7 RIB WS BRG RING - SC25 WS GUARD TUBE OUTER RPBY 371708 WS GUARD TUBE INNER WS SCREW DECAL DANGER PTO DRIVELINE DECAL DANGER GUARD MISS PTO WS SUPPORT BEARING WS ZERK WS REINFORCING COLLAR WS GUARD CONE 6 RIB CC LOCK ASSY Complete assembly 08/04/17-59 - 334-305P
Table of Contents Gearbox 1000 RPM (826-318C) Part Number Index (Applies to RCM4615 only) 21167 334-305P - 60-08/04/17
Table of Contents Part Number Index Section 6: Gearboxes (1000) Gearbox 1000 RPM (826-318C) (Applies to RCM4615 only) Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. Dwg 21167 Drawing Image Number 826-318C GBOX RCM50 1.75-20 1.21:1 CCW * U0.125.0531.00 CO HOUSING U0.125.6003.00 CO CROWN GEAR Z18 M7.8 8.0.9.00143 CO BEARING 30209 RTA25 8.7.3.00331 CO OIL SEAL 45 X 85 X 10 U0.125.2050.00 CO INPUT SHAFT 1 3/4"-20 8.5.2.00332 CO SNAP RING UNI 7437 0.709.7500.00 CO SHIM 84.7 8.5.1.00533 CO SNAP RING 50 UNI7435 U0.125.7100.00 CO CASTLE NUT 0.712.7500.00 CO SHIM 50.3X70.3 8.0.9.01090 CO BEARING 32210 1.181.7101.00 CO SEAL PROTECTOR 8.7.1.02349 CO OIL SEAL 60X110X12 8.0.9.00079 CO BEARING 30212 U0.125.3002.00 CO OUTPUT SHAFT 8.4.7.02265 CO COTTER PIN B 5X60 0.121.7101.00 CO CAP 0.288.7101.00 CO BLANK WASHER 0.252.7525.00 CO SHIM 45.3X2.5 0.285.7510.00 CO SHIM 40.3 X 61.7 X 1 U0.125.1301.00 CO COVER 8.1.1.00501 CO BOLT M10X22 HHB 826-486C COMER U0.125.7003.00 OIL PLUG 8.6.5.00006 CO OIL PLUG 3/8 8.4.7.01045 CO COTTER PIN B6X70 SLD-SPRTLY 8.2.2.00560 CO CASTLE NUT M36X3 U0.125.5003.00 CO CROWN GEAR Z22 M7.8 * Notes: Oil Type 80-90W Capacity 10 Pints Complete assembly (Center deck) 08/04/17-61 - 334-305P
Table of Contents Gearbox 1000 RPM (826-319C) Part Number Index (Applies to RCM4615 only) 21171 334-305P - 62-08/04/17
Table of Contents Part Number Index Section 6: Gearboxes (1000) Gearbox 1000 RPM (826-319C) (Applies to RCM4615 only) Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. Dwg 21171 Drawing Image Number 826-319C GBOX RCM50 1.75-20 1:1.21 CW * U0.125.0531.00 CO HOUSING U0.125.5003.00 CO CROWN GEAR Z22 M7.8 8.0.9.00143 CO BEARING 30209 RTA25 8.7.3.00331 CO OIL SEAL 45 X 85 X 10 U0.125.2050.00 CO INPUT SHAFT 1 3/4"-20 8.5.2.00332 CO SNAP RING UNI 7437 0.709.7500.00 CO SHIM 84.7 8.5.1.00533 CO SNAP RING 50 UNI7435 U0.125.7100.00 CO CASTLE NUT 0.712.7500.00 CO SHIM 50.3X70.3 8.0.9.01090 CO BEARING 32210 1.181.7101.00 CO SEAL PROTECTOR 8.7.1.02349 CO OIL SEAL 60X110X12 8.0.9.00079 CO BEARING 30212 U0.125.3002.00 CO OUTPUT SHAFT 8.4.7.02265 CO COTTER PIN B 5X60 0.121.7101.00 CO CAP 0.288.7101.00 CO BLANK WASHER 0.252.7525.00 CO SHIM 45.3X2.5 0.285.7510.00 CO SHIM 40.3 X 61.7 X 1 U0.125.1301.00 CO COVER 8.1.1.00501 CO BOLT M8X22 HHB 826-486C COMER U0.125.7003.00 OIL PLUG 8.6.5.00006 CO OIL PLUG 3/8 8.4.7.01045 CO COTTER PIN B6X70 SLD-SPRTLY 8.2.2.00560 CO CASTLE NUT M36X3 U0.125.6003.00 CO CROWN GEAR Z18 M7.8 Complete assembly (R. H. Deck) 08/04/17-63 - 334-305P
Table of Contents Gearbox 1000 RPM (826-725C) Part Number Index (Applies to RCM4615 only) 33338 334-305P - 64-08/04/17
Table of Contents Part Number Index Section 6: Gearboxes (1000) Gearbox 1000 RPM (826-725C) (Applies to RCM4615 only) Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. Dwg 33338 Drawing Image Number 826-725C GBOX RC50 1.15:1 STD * U0.125.0531.00 CO HOUSING U0.125.5061.00 CO GEAR PINION Z19 M7.8 8.0.9.00143 CO BEARING 30209 RTA25 8.7.3.00331 CO OIL SEAL 45 X 85 X 10 U0.125.2050.00 CO INPUT SHAFT 1 3/4"-20 8.5.2.00332 CO SNAP RING UNI 7437 0.709.7500.00 CO SHIM 84.7 8.5.1.00533 CO SNAP RING 50 UNI7435 U0.125.7100.00 CO CASTLE NUT 0.712.7500.00 CO SHIM 50.3X70.3 8.0.9.01090 CO BEARING 32210 1.181.7101.00 CO SEAL PROTECTOR 8.7.1.02349 CO OIL SEAL 60X110X12 8.0.9.00079 CO BEARING 30212 U0.125.3002.00 CO OUTPUT SHAFT 8.4.7.02265 CO COTTER PIN B 5X60 0.121.7101.00 CO CAP 0.288.7101.00 CO BLANK WASHER 0.252.7525.00 CO SHIM 45.3X2.5 0.285.7510.00 CO SHIM 40.3 X 61.7 X 1 U0.125.1301.00 CO COVER 8.1.1.00501 CO BOLT M8X22 HHB 826-486C COMER U0.125.7003.00 OIL PLUG 8.6.5.00006 CO OIL PLUG 3/8 8.4.7.01045 CO COTTER PIN B6X70 SLD-SPRTLY 8.2.2.00560 CO CASTLE NUT M36X3 U0.125.6061.00 CO GEAR CROWN Z22 M7.8 * Notes: Oil Type 80-90W Capacity 10 Pints Complete assembly (Center Deck) 08/04/17-65 - 334-305P
Table of Contents Part Number Index Gearbox Divider 1000 RPM (826-521C) Comer (Applies to RCM4615 only) 26960 334-305P - 66-08/04/17
Table of Contents Part Number Index Section 6: Gearboxes (1000) Gearbox Divider 1000 RPM (826-521C) Comer (Applies to RCM4615 only) Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Dwg 26960 826-521C 8.1.1.00109 0.305.1300.00 8.0.9.00143 8.5.2.01772 8.7.3.00331 0.305.0300.01 0.709.7500.00 N/A 0.305.3000.00 0.305.2000.00 N/A 8.6.6.00201 826-848C A.305.501 Drawing Image Number DIV BOX COMER 1000RPM 1 3/4-20 * CO BOLT M10 X 35 8.8 TOP COVER PLATE CO BEARING 30209 RTA25 CO SNAP RING CO OIL SEAL 45 X 85 X 10 CO CASING CO SHIM 84.7 RPBY A.305.501 CO SHAFT 1" 3/4 Z20 CO SHAFT 1" 3/4 Z20 RPBY A.305.501 CO PLUG 3/8 GAS COMER 0.340.7101.00 DIPSTICK CO TRIAD GEAR Z20-Z24-Z24 M6.5 * Notes: Oil Type 80-90W Capacity 5.5 Pints Complete assembly Contains 2 of gear #8 and 1 of gear #11 08/04/17-67 - 334-305P
Table of Contents Part Number Index Gearbox Divider 1000 RPM (826-521C) ITG (Applies to RCM4615 only) 25682 334-305P - 68-08/04/17
Table of Contents Part Number Index Section 6: Gearboxes (1000) Gearbox Divider 1000 RPM (826-521C) ITG (Applies to RCM4615 only) Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. Dwg 25682 826-521C 18-059 804-158C 06-003 20-019 02-038 05-007 04-011 08-006 08-007 08-008 20-018 05-012B 02-039 10-001 17-002 17-001 17-003 03-126 03-127 11-012 12-008 07-022 09-013 16-110 Drawing Image Number DIV BOX 1000RPM 1 3/4-20 * ITG HOUSING WASHER SPRING LOCK M10 PLT ITG M10 X 1.5 X 30 CAP SCREW ITG INPUT CAP SPLITTER BOX ITG INPUT SHAFT ITG INPUT SHAFT OIL SEAL ITG BRG ASSEMBLY ITG INPUT CAP GASKET 0.10MM ITG INPUT CAP GASKET 0.25MM ITG IN & OUT CAP GASKET 0.45MM ITG HORIZONTAL HUB CAP ITG OUTPUT SEAL 58X95X10 THK ITG OUTPUT SHAFT ITG SPACER ITG SHIM 0.3 ITG SHIM 0.4 ITG SHIM 0.5 19 TOOTH GEAR ITG 23 TOOTH GEAR ITG BRG ADJ. NUT ITG COTTER PIN ITG SEALING WASHER ITG DRAIN PLUG ITG M10X1.5 DIP STICK BREATHER * Notes: Oil Type 80-90W Capacity 5.5 Pints Complete assembly 08/04/17-69 - 334-305P
Table of Contents Gearbox (826-721C) Part Number Index (Applies to RC4615 only) 33315 334-305P - 70-08/04/17
Table of Contents Part Number Index Section 6: Gearboxes (540) Gearbox (826-721C) (Applies to RC4615 only) Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. Dwg 33315 Drawing Image Number 826-721C GBOX RC50 1.75-20 1:1.60 CW * U0.125.0531.00 CO HOUSING U0.125.6053.00 CO GEAR CROWN Z24 M7.25 8.0.9.00143 CO BRG 30209 TAPPERED 8.7.3.00331 CO OIL SEAL 45 X 85 X 10 SL U0.125.2050.00 CO INPUT SHAFT 1 3/4"-20 8.5.2.00332 CO SNAP RING UNI 7437 A.709.500 COMER SHIM KIT 8.5.1.00533 CO SNAP RING 50 UNI7435 U0.125.7100.00 CO CASTLE NUT A.712.500 COMER SHIM KIT 8.0.9.01090 CO BRG 32210 TAPPERED 1.181.7101.00 CO SEAL PROTECTOR 8.7.1.02349 CO OIL SEAL 60X110X12 SL 8.0.9.00079 CO BRG 30212 TAPPERED U0.125.3002.00 CO OUTPUT SHAFT 8.4.7.02265 CO COTTER PIN B 5X60 0.121.7101.00 CO CAP 0.288.7101.00 CO BLANK WASHER 0.252.7525.00 CO SHIM 45.3X2.5 0.285.7510.00 CO SHIM 40.3 X 61.7 X 1 U0.125.1303.00 CO TOP COVER 8.1.1.00501 CO BOLT M8X22 HHB 8.6.5.00203 CO PLUG 1/2" GAS 8.6.5.00006 CO OIL PLUG 3/8 8.2.2.00560 CO CASTLE NUT M36X3 U0.125.5053.00 GEAR PINION Z15 M7.25 8.4.7.01045 CO COTTER PIN B6X70 SLD-SPRTLY 826-486C COMER U0.125.7003.00 DIPSTICK Complete assembly 08/04/17-71 - 334-305P
Table of Contents Gearbox 540 RPM (826-650C) Part Number Index (Applies to RC4615 only) 30528 334-305P - 72-08/04/17
Table of Contents Part Number Index Section 6: Gearboxes (540) Gearbox 540 RPM (826-650C) (Applies to RC4615 only) Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. Dwg 30528 Drawing Image Number 826-650C GBOX RCF36 1.75-20 1:1.60 CCW * U0.125.0531.00 CO HOUSING U0.125.6053.00 CO GEAR CROWN Z24 M7.25 8.0.9.00143 CO BRG 30209 TAPPERED 8.7.3.00331 CO OIL SEAL 45 X 85 X 10 SL U0.125.2050.00 CO INPUT SHAFT 1 3/4"-20 8.5.2.00332 CO SNAP RING UNI 7437 A.709.500 COMER SHIM KIT 8.5.1.00533 CO SNAP RING 50 UNI7435 U0.125.7100.00 CO CASTLE NUT A.712.500 COMER SHIM KIT 8.0.9.01090 CO BRG 32210 TAPPERED 1.181.7101.00 CO SEAL PROTECTOR 8.7.1.02349 CO OIL SEAL 60X110X12 SL 8.0.9.00079 CO BRG 30212 TAPPERED U0.125.3002.00 CO OUTPUT SHAFT 8.4.7.02265 CO COTTER PIN B 5X60 0.121.7101.00 CO CAP 0.288.7101.00 CO BLANK WASHER 0.252.7525.00 CO SHIM 45.3X2.5 0.285.7510.00 CO SHIM 40.3 X 61.7 X 1 U0.125.1303.00 CO TOP COVER 8.1.1.00501 CO BOLT M8X22 HHB 8.6.5.00203 CO PLUG 1/2" GAS 8.6.5.00006 CO OIL PLUG 3/8 8.2.2.00560 CO CASTLE NUT M36X3 U0.125.5053.00 GEAR PINION Z15 M7.25 8.4.7.01045 CO COTTER PIN B6X70 SLD-SPRTLY 826-486C COMER U0.125.7003.00 DIPSTICK Complete assembly 08/04/17-73 - 334-305P
Table of Contents Part Number Index Gearbox Divider 540 RPM (826-520C) Comer (Applies to RC4615 only) 26959 334-305P - 74-08/04/17
Table of Contents Part Number Index Section 6: Gearboxes (540) Gearbox Divider 540 RPM (826-520C) Comer (Applies to RC4615 only) Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Dwg 26959 826-520C 8.1.1.00109 0.305.1300.00 8.0.9.00143 8.5.2.01772 8.7.3.00331 0.305.0300.01 A.709.500 N/A 0.305.3000.00 0.305.2000.00 N/A 8.6.6.00201 826-848C A.305.500 Drawing Image Number DIV BOX COMER 540RPM 1 3/4-20 * CO BOLT M10 X 35 8.8 TOP COVER PLATE CO BEARING 30209 RTA25 CO SNAP RING CO OIL SEAL 45 X 85 X 10 CO CASING COMER SHIM KIT RPBY A.305.500 CO SHAFT 1" 3/4 Z20 CO SHAFT 1" 3/4 Z20 RPBY A.305.500 CO PLUG 3/8 GAS COMER 0.340.7101.00 DIPSTICK CO TRIAD GEAR Z20-Z20-Z24 M6.5 * Notes: Oil Type 80-90W Capacity 5.5 Pints Complete assembly Contains 2 of gear #8 and 1 of gear #11 08/04/17-75 - 334-305P
Table of Contents Part Number Index Gearbox Divider 540 RPM (826-520C) ITG (Applies to RC4615 only) 25681 334-305P - 76-08/04/17
Table of Contents Part Number Index Section 6: Gearboxes (540) Gearbox Divider 540 RPM (826-520C) ITG (Applies to RC4615 only) Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. Dwg 25681 826-520C 18-059 804-158C 06-003 20-019 02-038 05-007 04-011 08-006 08-007 08-008 20-018 05-012B 02-039 10-001 17-002 17-001 17-003 03-127 03-126 11-012 12-008 07-022 09-013 16-110 Drawing Image Number DIV BOX 540RPM 1 3/4-20 * ITG HOUSING WASHER SPRING LOCK M10 PLT ITG M10 X 1.5 X 30 CAP SCREW ITG INPUT CAP SPLITTER BOX ITG INPUT SHAFT ITG INPUT SHAFT OIL SEAL ITG BRG ASSEMBLY ITG INPUT CAP GASKET 0.10MM ITG INPUT CAP GASKET 0.25MM ITG IN & OUT CAP GASKET 0.45MM ITG HORIZONTAL HUB CAP ITG OUTPUT SEAL 58X95X10 THK ITG OUTPUT SHAFT ITG SPACER ITG SHIM 0.3 ITG SHIM 0.4 ITG SHIM 0.5 ITG 23 TOOTH GEAR 19 TOOTH GEAR ITG BRG ADJ. NUT ITG COTTER PIN ITG SEALING WASHER ITG DRAIN PLUG ITG M10X1.5 DIP STICK BREATHER * Notes: Oil Type 80-90W Capacity 5.5 Pints Complete assembly 08/04/17-77 - 334-305P
Table of Contents Hydraulic Components Part Number Index 37664 334-305P - 78-08/04/17
Table of Contents Part Number Index Section 7: Hydraulics Hydraulic Components Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 20. 21. 22. 23. Dwg 37664 318-018H 318-648D 800-060C 800-117C 800-306C 802-017C 803-209C 804-011C 804-029C 805-088C 805-104C 807-023C 810-312C 810-624C 810-818C 811-309C 811-619C 811-063C 811-312C 811-337C 811-062C 811-394C 235005 811-633C Image No. WLDMT. CYLINDER PIN TRANSPORT BAR CABLE TIE.19X14.25 3DIA 50LB VENT PLUG - 9/16-18 PLATED FILL PLUG VENTED 3/4-16 PLT HHCS 3/8-16X1 GR5 NUT FLANGE LOCK 3/8-16 PLT WASHER FLAT 3/8 USS PLT WASHER FLAT 1 SAE PIN, HAIR COTTER 3/16 WIRE DIA PIN COTTER 3/16 X 1 1/2 PLT SPRING HOSE LOOP CYL 3X12X1.25 ROD (TIE ROD) CYL 3X8X1.25 ROD (TIE) NO PINS STRK CNTRL SPCRS 1.125 TO 1.50 HH1/4R1 066 9/16FJIC HH3/8R1 168 3/4MORB 3/4FJIC EL 3/4MJIC 3/4MORB TE 9/16MJIC OREL 1/16 9/16MJIC 9/16MORB RPBY 811-337C CP 3/4FORB MALE QD POPPET TYPE MON PIN KIT 1.00C/W COTTER PIN HH3/8R1 162 3/4MORB 9/16 FJIC 08/04/17-79 - 334-305P
Table of Contents Hydraulic Cylinder (810-312C) Lion Part Number Index 25902 334-305P - 80-08/04/17
Table of Contents Part Number Index Section 7: Hydraulics Hydraulic Cylinder (810-312C) Lion Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. Dwg 25902 810-312C 803-020C 130560 801-023C 186561 N/A N/A N/A N/A N/A N/A 258821 491742 492282 492652 492721 494383 492870 810-887C Drawing Image Number CYL 3X12X1.25 ROD (TIE ROD) * NUT HEX 1/2-13 PLT MON PISTON NUT SCREW SET SH 3/8-16X3/8 TYPE C PLUG 9/16-18UNF MORB SOCKET HD MON ROD SEAL MON PISTON SEAL (PSP) MON END CAP B/U WASHER MON END CAP O-RING SEAL WIPER ROD MON PISTON WEAR RING MON PISTON 3.00-1.0-TSS-ISO-WR MON CYL TUBE MON TIE ROD LION ROD CLEVIS 1 1/4 (1PIN) LION CLEVIS CAP 3.0-9/16 ORB MON ROD CAP3.00-1.25-9/16ORBTS MON CYL ROD MON SEAL KIT 661702 Complete assembly Only Found in Kit #18 Only Found in Kit #18 Only Found in Kit #18 Only Found in Kit #18 Only Found in Kit #18 Only Found in Kit #18 08/04/17-81 - 334-305P
Table of Contents Hydraulic Cylinder (810-312C) Midway Part Number Index 15242 334-305P - 82-08/04/17
Table of Contents Part Number Index Section 7: Hydraulics Hydraulic Cylinder (810-312C) Midway Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. Dwg 15242 810-312C 1M6010 2M4418 3M4410 4M4104 5M4120 6M4152 7M4320 2A0208 N/A N/A N/A N/A N/A 2A0024 2A0014 2A0012 2A0006 2A0132 810-015C N/A Drawing Image Number CYL 3X12X1.25 ROD (TIE ROD * MW CLEVIS STD. DUTY MW ROD 1-1/4 DIA. X 10 STROKE MW HEAD CAP 3X1-1/4 RD 9/16SAE MW PISTON 3 DIA. MW TUBE 3 X 15 CYLINDER MW BASE 3 X 9/16 SAE MW TIE ROD 3 X 10 CYLINDER MW CLEVIS PIN MW WIPER MW O-RING MW BACK-UP MW O-RING MW BACK UP MW PISTON NUT 1-14 MW TIE ROD NUT MW NUT CLEVIS & TIE ROD MW CAPSCREW MW PIN CLIP CYL SEAL KIT 3 X 7 MW 3A4104 Crown Seal Complete assembly Only found in seal kit 19 Only found in seal kit 19 Only found in seal kit 19 Only found in seal kit 19 Only found in seal kit 19 Only found in seal kit 19 As Required 08/04/17-83 - 334-305P
Table of Contents Hydraulic Cylinder (810-624C) Lion Part Number Index 25896 334-305P - 84-08/04/17
Table of Contents Part Number Index Section 7: Hydraulics Hydraulic Cylinder (810-624C) Lion Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. Dwg 25896 810-624C 803-020C 130560 801-023C 186562 N/A N/A N/A N/A N/A N/A 292003 258818 491738 492278 494391 492675 493211 493830 810-887C Drawing Image Number CYL 3X8X1.25 ROD (TIE) NO PINS * NUT HEX 1/2-13 PLT MON PISTON NUT SCREW SET SH 3/8-16X3/8 TYPE C LION PLUG 3/4-16UNF SOCKET HD MON ROD SEAL MON PISTON SEAL (PSP) MON END CAP B/U WASHER MON END CAP O-RING SEAL WIPER ROD MON PISTON WEAR RING MON TIE ROD EXTND THD MON PISTON2.50-.750-TSS-ISO-WR MON CYL TUBE MON TIE ROD MON ROD CP2.50-1.12-9/16ORB-TS MON CLEVIS CAP MON CYL ROD LION HARDENED ROD CLEVIS 1 1/4 MON SEAL KIT 661702 Complete assembly Only found in seal kit #19 Only found in seal kit #19 Only found in seal kit #19 Only found in seal kit #19 Only found in seal kit #19 Only found in seal kit #19 08/04/17-85 - 334-305P
Decals Table of Contents Part Number Index 39758 334-305P - 86-08/04/17
Decals Table of Contents Part Number Index Section 8: Decals Ref. Part No. Part Description Comments Revision 1. 2. 3. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 23. 24. 25. 26. Dwg 39758 818-042C 818-045C 818-130C 818-240C 818-190C 818-229C 818-230C 818-268C 818-276C 818-543C 818-552C 818-556C 818-561C 818-564C 818-714C 818-830C 818-840C 838-094C 838-588C 838-614C 838-615C 848-872C 858-381C 858-737C 858-738C 858-767C 858-769C 858-770C Image No. DECAL PATENT PENDING DECAL WARNING PINCH PT/CRUSH DECAL CAUTION 540 RPM DECAL CAUTION 1000 RPM DECAL FLAG DECAL AMBER REFLECTOR DECAL RED REFLECTOR DECAL BLADE ROTATION DECAL WARNING OPERATING ANGLE DECAL DANGER PD GUARD MISS SML DECAL DANGER PTO DRIVELINE DECAL DANGER THROWN OBJ CUTTER DECAL DANGER RAISED WING HAZAR DECAL DANGER ROTATING BLADES DECAL DANGER CRUSHING TWO IMP DECAL SAFETY COMBO SUNWEST DECAL DANGER ROLLOVER HAZARD DECAL WARNING HYD PRESS LONG FOLDING CUTTER SPEED WARNING DECAL REFLECTOR RED 2X9 DECAL REFLECTOR AMBER 2X9 DECAL 7 YEAR GEARBOX WARRANTY DECAL JACK ADJUSTMENT DECAL RC4615 GREAT PLAINS DECAL RCM4615 GREAT PLAINS DECAL GREATPLAINS 25" CTR LOGO DECAL GREATPLAINS 14" LH LOGO DECAL GREATPLAINS 17" CTR LOGO RC4615 RCM4615 RC4615 RCM4615 08/04/17-87 - 334-305P
Table of Contents Part Number Index Lights 3 Inch (LED) Retro-Fit (334-577A) 37671 334-305P - 88-08/04/17
Table of Contents Part Number Index Section 9: Options & Accessories Lights 3 Inch (LED) Retro-Fit (334-577A) Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 14. 14. 14. 14. 14. 14. 14. 15. 16. 17. 18. Dwg 37671 334-450L 334-574 330-965D 330-966D 330-967D 331-471S 331-472S 800-060C 802-015C 802-027C 802-224C 803-078C 803-209C 803-255C 804-007C 891-522C J-37-R J-37-A J-AC1-15-B 891-523C J-37-R J-37-A J-AC1-15-B 891-529C 891-530C 891-531C 891-532C Image No. FOLDING CUTTER LIGHT KIT 3" ROTARY CUTTER LIGHT KIT MANUAL * LIGHT MNT LIGHT GUARD LIGHT MNT CLAMP RH LIGHT ASSY LH LIGHT ASSY CABLE TIE.19X14.25 3DIA 50LB RHSNB 3/8-16X1 GR5 HHCS 3/8-16X4 1/2 GR5 HHCS 1/4-20X1 1/4 GR5 NUT LOCK 3/8-16 NYLON INSERT NUT FLANGE LOCK 3/8-16 PLT NUT HEX NYLOCK 1/4-20 WASHER FLAT 1/4 SAE PLT DUAL LED LIGHT LH RED LED LENS MODULE AMBER LED LENS MODULE BLACK LENS COVER DUAL LED LIGHT RH RED LED LENS MODULE AMBER LED LENS MODULE BLACK LENS COVER RH LIGHT WIRE HARNESS 8' LH LIGHT WIRE HARNESS 8' ENHANCE MODULE LEAD WIRE HARNESS 8' Complete assembly Light kit manual Complete light assembly (Goes on 331-472S) Red lens Amber lens Black lens Complete light assembly (Goes on 331-471S) Red lens Amber lens Black lens 08/04/17-89 - 334-305P