FGMDLPG-1 Flow Meter FGMDLPG-1 flow meter is made by cast Aluminum, small size, light weight, used in Liquid Gas Dispenser. Max 5~60L Discharge rate per revolution : 0.5L/r Adjustable Minimum Volume: 0.001 Repeatable Tolerance : 0.25% FGMDLPG-2 LPG Flow Meter LPG-2 flow meter is in construction of stainless steel bush and four-piston positive displacement with check valve built-in, with advantage of high reliability, good wearability, precise measure, and long life. Max Working Pressure: 5-60L Discharge rate per revolution: 0.5L/r Adjustable Minimum Volume: 0.001 Repeatable Tolerance: 0.25% FGMDLPG-3 Series of Differential Valves Pressure Difference : 1.8 MPa 0.38 Bar 50 to 60 LPM FGMDLPG-4 LPG Separator 2.5MPa By Pass Pressure : 4.0MPa Strainer : 0.08mm Check valve, filter, by pass pipe built in LPG separator. FGMDLPG-5 Solenoid Valve Diameter: Connection: Working Pressure: Voltage : Ambient Temperature: 20mm/3/4" Thread 5-50L/min 0~1.6Mpa AC220V 50Hz -20 ~65 Lowest Working Temperature: -20. Anti-Explosion Class:EXdⅡB T4.
FGMDLPG-6 LPG Nozzle Maximum Operating Pressure: LPG Discharge on Disconnect: Temperature Range: Coupling Style: Body: Materials: Internal Components: External Components: 350psi 4.3cc -40 ~85 Italian Style Aluminum Brass/Steel Brass/Stainless Steel FGMDLPG-7 LPG Nozzle Holder FGMDLPG-8 LPG Manometer Accuracy: ±2.5% Pressure: 0-4MPa FGMDLYB-2000 LPG Vane Truck Pump FGMDLPG-9-A LPG Hose 1 Meter with Couplings FGMDLPG-9-B LPG Hose with Stainless Steel Net, 1M with coupling FGMDLPG-10 LPG Breakaway Stainless Steel body Thread: M27 1.5 Max. Pull: 120Bar 5 to 50 LPM FGMDLYB-2000 FGMDLYB-2000 with V-Belt Drive FGMDLYB-2000 Vane Truck Pumps, for LPG and NH3 Bulk transfer, auto-fuel pumping, LPG cylinders, and other application, is specially designed to perform in such severe operating conditions as high differential pressure, pump over speeding, poor suction conditions. Advantage Innovative cam design virtually eliminates cavitations; New materials utilized in cam and blades and heavy duty bearings extend pump life; Single mechanical seal,very easy seal replacement and maintenance; Large diameter non-metallic pins are suitable for higher pump speeds Flow Rate Speed (RPM) Differential Pressure(Bar) Flow Rate(L/min) Power(KW) 800 3.4 323 2.3 6.9 287 4.6 650 3.4 261 1.9 6.9 227 3.8 500 3.4 189 1.4 6.9 155 2.9 Inlet Outlet Max. Speed Temperature Max. Working Pressure Max. Differential Pressure Internal Relief valve NPT2" NPT2" 800RPM -32 ~107 C 28.6bar 8.6bar Yes
FGMDLWB-150 LPG Turbine Pump FGMDLWB-150 FGMDLWB-150 with coupling drive FGMDLWB-150 LPG Turbine Pump, for high differential pressure application using, for underground and aboveground tank application, used for auto gas dispensing, cylinder filling, vaporizer feed, bulk transfer. Advantage A cost effective alternative to submersible designs; Meeting multiple demands for LPG application. Whether a low or high flow rate with a high differential pressure, by underground and aboveground tank application, FGMDLWB-150 pump is an idea pump for two dual hose LPG dispensers; Continuous duty design; Serviceability is simple and cost effective. Inlet 1-1/2" Outlet 1" Speed 60Hz 3450 RPM or 50Hz 2880 RPM Max. Working Pressure 27.6 bar(400psi) Max. Differential Pressure 17.2bar(250PSI) Max./Min. Temperature -32 ~107 Power of Motor 15Kw FGMDLYB-40 LPG Sliding-vane Pump FGMDLYB-40 FGMDLYB-40 with coupling drive FGMDLYBLPG sliding-vane pump is commonly found in the LPG industry because its high pumping efficiencies, Long life, ease of maintenance. Its housing and rotors are constructed of ductile iron for high strength; the vanes are self-adjusting for wear. It can handle small amounts of vapor formed at the pump suction. We have V-belt and direct-drive mounting available for option. Application: Cylinder filling ;Loading/unloading of bulk trucks and transport trailers; Automotive fillings; Vaporizer feed pumps Speed : 940rpm Max. 2.5MPa Differential Pressure: 0.4MPa Flow Rate : 140L/min Vacuum : 0.04MPa NPSH : 2.5m Motor Power : 2.2Kw
FGMDB-65 LPG Side Channel Multistage Pump FGMDB-65 without motor FGMDB-65 with motor The FGMDB-65 multistage pump, centrifugal and side channel, is designed with 6 stages, having a horizontal configuration, Shaft sealing by mechanical seal without cooling, for handling LPG (liquid gas ), the liquids involving high-differential pressure, low NPSH conditions and aerated liquids up to 50% gas, such as pumping from underground tanks. The use of a pre-compression turbine at the suction end makes it possible to obtain a very small required NPSH, so that this pump can be used under very difficult suction conditions. Application: LPG cylinder filling; Pumping LPG from underground storage; Bulk filling operations; Loading/unloading of bulk trucks and transport trailers; Vaporizer feed pumps. Technical performance: Direction of rotation: anti-clockwise facing the end of the pump drive shaft Max. Pressure : 40 bars at 120 Speed : Power: 1450rpm 380V,50Hz,4KW Ambient Temperature: 20 ~+60 Number of stages : 6 Connecting flanges: Bearings : Lubrication: DIN 2501, PN 40 as per DIN 2501, PN 40 sleeve bearing at the pump end, ball bearing at the drive end Plain bearing at the pump end lubricated by the pumped product, ball bearing at the drive end lubricated for life. Performance data Density = 1kg/l 1.0CBM/H 1.5CBM/H 2.5CBM/H 3.5CBM/H 4.5CBM/H Flow rate FGMDB-65 NPSH1[m] NPSH2[m] Power P(KW) 6 Head H(m) 243 1.35 0.17 Power P(KW) 5.5 Head H(m) 219 1.25 0.17 Power P(KW) 4.35 Head H(m) 169 1.1 0.17 Power P(KW) 3.4 Head H(m) 120 0.95 0.17 Power P(KW) 2.65 Head H(m) 76 0.95 0.18
FGMDMLD-50 Mechanical Mobile LPG Dispenser Standard: Meter: Pump: Filter Air Separator: Power: Ex-ProofMotor: Hose Hose Breakaway FGMD50 Series of LPG Dispensers Flow Rate : FGMDLPG-2 Meter FGMDLYB-40 Vane pump FGMDLPG-4 Separator AC380V±20%50±1Hz AC220V±20%50±1Hz 380V,50Hz 4Kw 220V,50Hz 4Kw 3/4" 500mm Flange Yes 50L/min Accuracy: ±0.3% Vacuum: Totalizer: Sub-Total: Temperature: 0.035MPa 8digital 5digital -40~55 FGMD50LPG111 Single Nozzle LPG Dispenser FGMD50LPG222 Double Nozzle LPG Dispenser Model: FGMD50LPG111 FGMD50LPG222 Package: Strong Carton Strong Carton Net Weight: 160kg 205kg Gross Weight: 180kg 225kg Size: 930 470 2000mm 930 540 2000mm Voltage: 220v,50Hz 5-50Lmin Display Resolution: 0.0L Max. Dispensing Range: Dispense Amount: Unit Price: Totalizer: Temperature: Working Pressure: Intensity Test: Air tightness Test: Solenoid valve: Safety return valve: Hose: 0.00~9999.99L 0.01~9999.99L 0.01~0.99L 0~999999L -40~45 0~2.5MPa 2.0MPa AC220V Ex Proof 1.6MPa Internal diameter 13mm(length 0.7m+5.2m)