Zone manifold DN 25, DN 32, DN 50 Mounting and operating instructions WOMIX Sportowa 31 89-200 Szubin, Poland phone/fax +48 52 382 44 50, +48 52 382 44 51 www.womix.com.pl e-mail: export@womix.com.pl
Central heating zone manifold C60 - DN 25 Two-chamber steel manifold C 60 DN 25-2, 3 or 4 heating circuits was created to simplify installation of pump groups. The factory manifold is equipped with EPP insulation. In addition, the manifold has an output DN 20 on the return side for connecting pressure vessel and the output DN 25 on the power supply for connecting the safety group. On request, the manifold can be equipped with a set of mounting brackets on the wall DELTA (see bushings M8). Max. power: Insulation material: Zone manifold C 60 2F - DN 25 steel ST 37.1 8 bar 45 kw (DT 200C) Nut 1 ½ 1 M directional arrows. Installation should be be carried out according with the directions of the arrows. Supply from boiler Zone manifold C 60 3F - DN 25 Zone manifold C 60 4F - DN 25 2
Central heating zone manifold C70 - DN 25 Two-chamber steel manifold C 70 DN 25-2, 3, 4 or 5 heating circuits was created to simplify installation of pump groups. The factory manifold is equipped with EPP insulation. In addition, the manifold has an output DN 20 on the return side for connecting pressure vessel and the output DN 20 on the power supply for connecting the safety group. On request, the manifold can be equipped with a set of mounting brackets on the wall DELTA (see bushings M8). Max. power: Insulation material.: steel ST 37.1 8 bar 73 kw ( DT 200C) Nut 1 ½ F 1½ M directional arrows. Installation should be be carried out according with the directions of the arrows. Zone manifold C 70 2F - DN 25 Supply from boiler 3
Zone manifold C 70 3F - DN 25 Zone manifold C 70 4F - DN 25 Zone manifold C 70 5F - DN 25 4
Central heating zone manifold C 100 - DN 25 Two-chamber steel manifold C 100 DN 25-2, 3, 4, 5 or 6 heating circuits was created to simplify installation of pump groups. The factory manifold is equipped with EPP insulation. In addition, the manifold has an output DN 20 on the return side for connecting pressure vessel and the output DN 25 on the power supply for connecting the safety group. On request, the manifold can be equipped with a set of mounting brackets on the wall DELTA (see bushings M8). Warning! The exception is the manifold C 100 6F. The above-mentioned manifold can be equipped with a set of mounting brackets on the floor (see the socket G1 "). Max. power: Insulation material: Zone manifold C 100 3F - DN 25 Nut 1 ½ F 1 1/4 M directional arrows. Installation should be be carried out according with the directions of the arrows. Zone manifold C 100 2F - DN 25 Steel ST 37.1 8 bar 110 kw (DT 200C) Supply from boiler 5
Zone manifold C 100 4F - DN 25 Zone manifold C 100 5F - DN 25 Zone manifold C 100 6F - DN 25 6
Central heating zone manifold C 100 - DN 32 Two-chamber steel manifold C 100 DN 32-2, 3, 4, 5 or 6 heating circuits was created to simplify installation of pump groups DN 32. The factory manifold is equipped with EPP insulation In addition, the manifold has an output DN 20 on the boiler side for connecting pressure vessel and the output DN 25 on the installation side for connecting the safety group. On request, the manifold can be equipped with a set of mounting brackets on the wall DELTA (see bushings M8). Warning! The exception is the manifold C 100 6F. The above-mentioned manifold can be equipped with a set of mounting brackets on the floor (see the socket G1 "). WARNING! In order to connect the DN 32 group to the manifold it is necessary to buy additional connections DN 1 1/4 "x 2" or connections with integrated ball valve. Max. power: Insulation material: steel ST 37.1 8 bar 120 kw (DT 200C) 1 1/4" M 1 1/4" M directional arrows. Installation should be be carried out according with the directions of the arrows. Zone manifold C 100 2F - DN 32 The dimension of 140 mm is available until stocks are exhausted Supply from boiler 7
Zone manifold C 100 3F - DN 32 Zone manifold C 100 4F - DN 32 Zone manifold C 100 5F - DN 32 Zone manifold C 100 6F - DN 32 8
Central heating zone manifold C2 100 - DN 32 Two-chamber steel manifold C2 100 DN 32-2, 3, 4, 5 or 6 heating circuits was created to simplify installation of pump groups. The factory manifold is equipped with EPP insulation. Additional manifold is equipped with two thermometers and two the socket ½ " F drain. WARNING! In order to connect the DN 32 group to the manifold it is necessary to buy additional connections DN 1 1/4 "x 2" or connections with integrated ball valve. steel ST 37.1 Max power: Insulation material: 6 bar 220 kw (DT 200C) 1 1/4" M 2" directional arrows. Installation should be be carried out according with the directions of the arrows. Zone manifold C 2 100 2F - DN 32 Supply from boiler Return 9
Zone manifold C 2 100 3F - DN 32 Zone manifold C 2 100 4F - DN 32 Zone manifold C 2 100 5F - DN 32 Zone manifold C 2 100 6F - DN 32 10
Central heating zone manifold C2 120 - DN 50 Two-chamber steel manifold C2 120 DN 50 2 or 3 heating circuits was created to simplify installation of pump groups DN 25, DN 32, DN 40, DN 50. The factory manifold is equipped with EPP insulation. Additional manifold is equipped with two thermometers and two the socket ½ " F drain. Max. power: Insulation material: steel ST 37.1 6 bar 350 kw (DT 200C) 250 mm 2" M 2 1/2" directional arrows. Installation should be be carried out according with the directions of the arrows. Zone manifold C 2 120 2F - DN 50 Supply from boiler Return Zone manifold C 2 120 3F - DN 50 11