e Static Indoor Key Features Flexible flat conductor strip with High Output Red 625nm, Green: 520nm, Blue: 465nm LEDs, RGB colors can be used together with White LED to create different tone of White or soften the RGB color pallet Ideal for IP20 interior location applications such as cove, undercounter/cabinet, and lighting accents Sold per foot and manufactured to specified lengths with factory attached end preps ll Duratape features 2-circuit substrate for optimum heat dissipation, minimizing voltage drop while increasing run lengths per power feed, standardizing electrical flow over entire length of the strip for maximum product reliability ll Duratape features double sided solder points for maximum conductivity and durability Pre-assembled to specific lengths with various connector options for project requirements and efficient power configuration Max continuous length: up to 16 per run DMX 512 drivers available (see pg. 7) Dimensional Drawings 0.66" O.C. Field cut possible every 4. Caution! Field cutting should only be done before power is connected. 0.48" 13/32 0.09" Spacing LEDs DURTPE TM RGB RGB Tapelight LED Tapelight strip emits sharp, color changing effects in outdoor niche, cove and architectural decorative applications. Details 0.66 OC LED Spacing 18 LEDs per foot End Preps Factory preped end preps available (See Page 2) Field Cuts Mounting Installation Power Supply Listing Compliance Warranty Fixture Data Model Efficacy Lm/Wt See page 2 for cut zones Includes installation-ready 3M tape adhesive for simplified installation directly to mounting channel or application surface Optional aluminum channels with base and cover can be used to install decorative, protective covers Listed Class 2 output, 24V DC power supply required culus Class 2 Listed E471161 Tested in accordance with LM-79-08 Title 24 commercial installation compliant. ROHS compliant 3 year warranty Lm/Ft RGB 46.86 164 3.5 Wt/Ft CLIFORNI T24 COMPLINT LED Data Model IP20 Wt/LED Viewing ngle Class 2 Lifespan at 90% drive RGB 0.20 120 40,000hrs * LEDs operating at 90% of LED manufacturers maximum current rating. Design Installation Examples uratape Static Indoor. With option PVC sleeve Cove Task ape Static Indoor. With option PVC sleeve Directional Cove Lighting Under Directional Directional Task Cove Lighting Cove Lighting Toe Kick Ordering Guide PRODUCT CODE INTENSITY WTTGE IP RTING LED COLOR VOLTGE + END PREP + MOUNTING + Shelf Lighting DL Duratape HO High Output 35 3.5 W/ft I Indoor Toe Kick Shelf Lighting IP20 RGB Red: 625nm, Green: 520nm Blue: 450nm 24 24 VDC Toe Kick Shelf Lighting POWER SUPPLY Targetti US - Targetti Group Company - 750- W. 17 th St. Costa Mesa, C 92627 - Phone (714) 513-1991 - Email: targettiusa@targetti.com - www.targetti.us - 01.10.19 - Page 1 of 7
End Preps and Connectors DURTPE TM RGB FF F IP20 FF INDOOR F B Required end preps: (One required for each run of tape) HH H C 07UI3CBL1 (3-circuit RGB) Factory attached single 3 circuit lead wire prep. 24 four conductor Lead wire/dead end allows for connection to power at lead end and field trim of Duratape product at the other end. 07UI3DDCBL: DDITIONL LED WIRE (3-circuit RGB) dditional lead wire purchased per foot and factory attached to specified run leads. Lead wire can be field cut to desired length. B 07UI3CBL2 (3-circuit RGB) Factory attached double ended 3 circuit lead wire prep. 24 four conductor lead wire at both ends. One end can be used for power connectivity while the other end can be used for interconnection to run to an additional length of Duratape. 07UI3DDCBL: DDITIONL LED WIRE (3-circuit RGB) Factory attached single 3 circuit lead wire prep. 24 four conductor Lead wire/dead end allows for connection to power at lead end and field trim of Duratape product at the other end. D C 07UI3FOLDCBL-XX (3-circuit RGB) Factory attached 3 circuit wire fold (specified length). Wire folds are factory attached to Duratape to meet your specified installation requirements. Wire fold lengths available are 2, 3, 4, 6, 12. dd length number to end of part number. GG G D 07UI3LICON (3-circuit RGB) Removable/lockable 3 circuit interconnect lead wire. 24 four conductor lead wire with locking and unlocking lead connector. E Optional Connectors: E 07UI3DDCON (3-circuit RGB) dditional 3 circuit connectors. Lead wire connectors 3/ea per connection. H Targetti US - Targetti Group Company - 750- W. 17 th St. Costa Mesa, C 92627 - Phone (714) 513-1991 - Email: targettiusa@targetti.com - www.targetti.us - 01.10.19 - Page 2 of 7
Profiles DL-LUM-U-8 Low profi le aluminum U-Channel for linear run vailable in 8ft 1/2 ID, 5/8 OD, 1/4 H DL-LUM-L-6 luminum L-Channel 1/2 x 1/2 for linear run Duratape can be mounted at either 0º or 90º mounting positions. vailable in 6 DL-I-MCHN-4 Linear Mounting channel. vailable in 4 DL-C-2PC-C (Clear) DL-C-2PC-F10/F30/F60 (Frosted) Two-piece mounting tube; base (white) with cover (frosted) for linear applications. Frosted diffusion levels, 10%, 30% or 60%. vailable in 4 DL-C-45-MCH-4 (Base, REQUIRED) 45 mounting base (white) for 45 mounted linear applications. vailable in 4 DL-C-45-CVR-4-C (Clear) DL-C-45-CVR-4-F10/F30/F60 (Frosted) 45 mounting base cover. vailable in 4 0.66 0.20 0.73 0.20 0.375 0.66 0.62 0.81 0.87 Targetti US - Targetti Group Company - 750- W. 17 th St. Costa Mesa, C 92627 - Phone (714) 513-1991 - Email: targettiusa@targetti.com - www.targetti.us - 01.10.19 - Page 3 of 7
Profiles 0.92 0.63 0.48 0.48 0.39 0.77 0.76 0.63 0.63 1.00 PRP20 Surface mount aluminum channel. nodized aluminum rigid profi le complete with opal translucent diffuser cover. vailable in 6 KTPRP20 Mounting Kit: (10) mounting clips for aluminum channel, (5) end caps with hole for interconnectivity, (5) end caps with no hole for run length PRIN20 Flush mount aluminum channel. nodized aluminum rigid profi le complete with opal translucent diffuser cover. vailable in 6 KTPRIN20 Mounting Kit: (10) mounting clips for aluminum channel, (5) end caps with hole for interconnectivity, (5) end caps with no hole for run length PRN20 45º aluminum channel. nodized aluminum rigid profi le complete with opal translucent diffuser cover. vailable in 6 KTPRN20 Mounting Kit: (10) mounting clips for aluminum channel, (5) end caps with hole for interconnectivity, (5) end caps with no hole for run length PRINTCG Surface mounted walk over rated continuous illumination aluminum channel. Includes frosted polycarbonate cover for shadowless light distribution. Complete with track for easy strip insertion. vailable in 1M KTPRINTCG Mounting Kit: (10) mounting clips for aluminum channel, (5) end caps with hole for interconnectivity, (5) end caps with no hole for run length 0.60 1.00 2.52 PRINCG Flush Mount aluminum profi le for installation in plasterboard. Complete with white lens. vailable in 6 Targetti US - Targetti Group Company - 750- W. 17 th St. Costa Mesa, C 92627 - Phone (714) 513-1991 - Email: targettiusa@targetti.com - www.targetti.us - 01.10.19 - Page 4 of 7
The aluminium profile is completed, depending on the application chosen, with screens (flat front and rear pair of screens for indirect emission), side closure caps and suspension kit. DURPROFILE PLUS - LUMINIUM DOUBLE EMISSION PROFILE * Code Description L Barcode 80119058 new PRDESO Double emission aluminium profile 1220 39970 1 new PRDESO-SL Rear support for surface mount 1220 39987 1 new PRDESO-FL Front screen in flat opal polycarbonate plate 1220 39994 1 DuraProfile Plus - luminum Double and Single Emissions The direct emission is configurable with the use of 1 to 4 Duratape strips; Indirect emission uses two strips Mounting: On ceiling for unidirectional or suspended for unidirectional or double emission (direct & indirect) Manufactured according to specification, with lens (flat front and rear pair of lens for indirect emisison), side closure caps and suspension kit DURTPE TM RGB new PRDESO-FLR Couple of opal polycarbonate rear screen 1220 40020 1 new KTPRDESO-FL Set of two side caps flat screen - 40068 1 new KTPRDESO Linear architectural Suspension profile kit configurable in direct, indirect * vailable emission upon or request. both, for high levels of light emission Rear - support 40051 required 1 for ceiling mounting, code PRDESO-SL Profile features internal compartment suitable for integral power supply and dimming module (Consult Factory) Possibility of on/off switching and dimming separate for direct and indirect lighting 5ft Max. 2.87" Ceiling mounting shown with 4 strips for direct light. 2.44" Ceiling mounting shown with 3 strips for direct light. Suspended mounting shown with 2 strips for indirect lighting and SUSPENDED up to 4 strips MOUNTING for direct WITH TWO STRIPS FOR light. INDIRECT LIGHTING ND 4 FOR DIRECT LIGHT CEILING MOUNTING WITH 4 STRIPS FOR DIRECT LIGHT CEILING MOUNTING WITH 3 STRIPS FOR DIRECT LIGHT Suspended LINES OF LIGHT FOR GENERL LIGHTING PRDESO (Required) Double emission aluminum channel. vailable in 4 PRDESO-FL (Optional) Front lens in flat opal polycarbonate. vailable in 4 PRDESO-FLR (Optional) Couple of opal polycarbonate rear lens. vailable in 4 KTPRDESO-FL (Required) Set of two end caps. KTPRDESO (Required) Suspension kit completed with suspension mounting kit and 5ft aircraft cable. Surface Mount PRDESO (Required) Double emission aluminum channel. vailable in 4 PRDESO-SL (Optional) Rear support for surface mount. vailable in 4 PRDESO-FL (Optional) Front lens in flat opal polycarbonate. vailable in 4 KTPRDESO-FL (Optional) Set of two end caps. KTPRDESO-FL Targetti US - Targetti Group Company - 750- W. 17 th St. Costa Mesa, C 92627 - Phone (714) 513-1991 - Email: targettiusa@targetti.com - www.targetti.us - 01.10.19 - Page 5 of 7
Profiles 1.38 0.50 0.50 3.75 PRDE Surface mounted double emission aluminum profile with dual opal lenses. Dual tape illuminating (two runs of tape) in opposite directions. vailable in 4' KTDEP Set of two end caps for double emission profile. PRDSP Surface mounted aluminum profile with dome opal lens. Dual tape illumination (two runs of tape). vailable in 4' KTDSP Set of two end caps for dome profile. PRDSN Surface mounted 45º aluminum profile with domed opal lens. Dual tape illumination (two runs of tape). vailable in 4' KTDSN Set of two end caps for dome profile, mounting at 45º. Surface Mount Wall Surface Mount Ceiling Surface Mount Corner Horizontal or Corner Vertical Surface Mount Ceiling Surface Mount Wall Targetti US - Targetti Group Company - 750- W. 17 th St. Costa Mesa, C 92627 - Phone (714) 513-1991 - Email: targettiusa@targetti.com - www.targetti.us - 01.10.19 - Page 6 of 7
Power Supply (REQUIRED) Type Wattage Input/Output Voltage Dimmable IP Rating Output Dimmensions DEDDI1001244CDMX ELECTRONIC DDRESSBLE DMX DRIVER 100W 120-277V / 24V DMX DIMMING 4 CHNNEL NEM1 ENCLOSURE UL CLSS 2 12 x 12 x 4 1 DEDDI2002244CDMX ELECTRONIC DDRESSBLE DMX DRIVER 2X100W 120-277V / 24V DMX DIMMING 4 CHNNEL NEM1 ENCLOSURE UL CLSS 2 12 x 12 x 4 1 DEDDxxxDMX consult factory ELECTRONIC DDRESSBLE DMX DRIVER STNDLONE, UL LISTED ENCLOSURE PROVIDED BY OTHERS consult factory 120-277V / 24V DMX DIMMING N/ UR CLSS 2 consult factory 1 Dimensions include enclosure with mounting bracket. * Constant voltage drivers 50/60HZ, voltage regulated with short circuit protection. Operating temperature -40 C- 80 C * Installation of power supply must be compliant to Class 2 installation standards. Refer to NEC and local building code requirements. Controller (Optional) Type pplication Voltage Listing Dimensions SWITCH20 TGDMXSLESU9 TGCBUPWMX44 RGBW Touch DMX512 Wall Control Panel with Sensitive Glass Touch Panel, White Finish Stand-alone DMX Programmable Controller with Easy to Use Software Interface CSMBI PWM four channel wireless Bluetooth controller # Ouput Channels Number of Zones Number of Scenes Indoor Only 12-24V DC UL 4.73 H x 2.95 W x 1.15 D 12 3 1 Indoor Only 5.5V DC ETL, UL 5.3"W x 5.5"H x 1.9D 256 1 20 IP20 24V DC UL Plenum 2.2 x 1.2 x 0.7 4 1 CSMBI pp Drivin SWITCH20 TGDMXSLESU9 TGCBUPWM44 TPE MXIMUM LENGTH IN FEET PER DRIVER Fixture Wattage 2.8W 3.0W 3.9W 4.2W 4.4W 8.8W 40W 11FT 10FT 8FT 7FT 7FT 3FT Driver Wattage 60W 17FT 16FT 12FT 11FT 10FT 5FT 96W 27FT 25FT 19FT 17FT 17FT 8FT 90W 25FT 24FT 18FT 18FT 16FT 8FT 2X90W (2) 25FT (2) 24FT (2) 18FT (2) 18FT (2) 16FT (2) 8FT 3X90W (3) 25FT (3) 24FT (3) 18FT (3) 18FT (3) 16FT (3) 8FT 100W 28FT 26FT 20FT 19FT 18FT 9FT 2X100 (2) 28FT (2) 26FT (2) 20FT (2) 19FT (2) 18FT (2) 9FT Targetti US - Targetti Group Company - 750- W. 17 th St. Costa Mesa, C 92627 - Phone (714) 513-1991 - Email: targettiusa@targetti.com - www.targetti.us - 01.10.19 - Page 7 of 7