Industrial Air Motors

Industrial Air Motors

AUTHORIZED SERVICE AGENT Proper service of Ingersoll-Rand/ARO air motors with quality-authorized parts will help prevent wear and tear, eliminate downtime and extend a product s life. That s why Ingersoll-Rand (IR) has created a program that provides service and repairs to the end user through the use of Authorized Service Agents. This newly developed program ensures that Ingersoll- Rand maintenance and repair standards are met, through the use of genuine parts and service. Whether it s serious technical difficulties or just routine maintenance, products can be taken directly to any specified Authorized Service Agent. From there, the program has been set up to make certain that the air motor is put into the hands of reliable, fully-trained IR service technicians. This process ensures that you have access to the expertise and resources of a full service center, regardless of geographic location. Program Features: One Face to the End User Quality repairs using genuine IR parts Access to an IR owned service center Fully trained service technicians using IR specified testing equipment Receive your quote in 48 hours or less 9 day repair warranty (877) 258-899

Table of Contents Introduction and Product Overview 1 Air Motor Selection and Characteristics 3 Page In-Line Planetary Gear, Multi-Vane Air Motors -Series.1 hp 6 M2 Series.11.25 hp 8 -Series.25 hp 11 M4 Series.31.5 hp 13 -Series with -Series Gearing.5.6 hp 16 -Series with 22 Series Gearing.5.6 hp 18 M7 Series.61.85 hp 2 22-Series with Thread-On Gearing.7.85 hp 24 22-Series with Bolt-On Gearing.7.85 hp 26 22-Series with 44-Series Gearing.65.9 hp 28 Series 181 and 1841 1.1 1.4 hp 3 38 and 384 Series 1.35 1.55 hp 32 44-Series 1.9 2. hp 34 48 and 484 Series 3. 3.8 hp 36 Spur Gear, Multi-Vane Air Motors 17RA, 17RB, 34RA and 34RB Series 2.3 4.1 hp 38 48RA and 48RB Series 3. 3.1 hp 4 92RA and 92RB Series 7.9 8.15 hp 42 92RM and 992RM Series 8.15 9.9 hp 44 Direct Drive Multi-Vane Air Motors MVA and MV Series 1.93 1.5 hp 46 Select Series.33 4.8 hp 5 Milling & Sawing Motors (In-Line Planetary Gear, Multi-Vane Air Motors) Overview and Reference chart 57 -Series Milling Motors.25 hp 59 -Series Milling Motors.6 hp 61 22-Series Milling Motors.85 hp 63 22-Series Milling Motors (Straddle).85 hp 65 22-Series Milling Motors (Side Mount).85 hp 66 44-Series Milling Motors 2. hp 67

Table of Contents CONT. Specialty Governed Motors Model 22N51-W/RC 1.75 hp 69 Series 551 5.6 hp 7 Direct and Geared Drive Piston Motors CC KK Series 2.5 25. hp 71 MMP15 Series 16. hp 76 KK5B Series 29. 3. hp 78 Components and Equipment 81 Accessories 84 Warranty Information 86 Index by Model number 87-9 Contact Information Back Cover

Air Motors IR AIR POWER Creating sheer power from the natural environment, Ingersoll-Rand air motors are flexible, efficient alternatives to electric sources perfect for a wide range of industrial applications. Consider these advantages: Infinitely variable speeds and torques via pressure regulation or air valves no costly controls required Instant starting, stopping and reversing eliminates the delays of motor speed-up or slow-down periods Will not overheat or burn out, even when overloaded or run to stall Safe operation in hazardous conditions, with no electrical sparks or hydraulic fluids Cool running characteristics minimize the effects of hot, wet or dusty surroundings Low maintenance, based on simplicity of design and strength of construction Excellent design flexibility a function of compact size, light weight, and high power output Temperature range up to 15 F with standard lubrication and up to 3 F with high temperature lubrication A FULL SPECTRUM OF SOLUTIONS Ingersoll-Rand offers well over 2 cataloged models of air motors, with an extensive range of options: Reversible and non-reversible types.1 to 3 horsepower Vane or piston configurations Geared and non-geared varieties 23 rpm to 26, rpm speed ratings.1 ft-lb. to 19 ft-lb. torque ratings In addition, Ingersoll-Rand maintains data on hundreds of special application air motors that have solved problems for design engineers around the world over the years. You can access this invaluable resource by contacting your Ingersoll-Rand representative or distributor with details of your situation. With over 125 years of engineering and manufacturing leadership, Ingersoll-Rand is the expert in air power. 1

IR AIR MOTOR PERFORMANCE CURVES The performance curves shown throughout this catalog can assist you in matching specific air motor models to requirements. Performance data within one series may vary slightly, depending on gear ratios. When this occurs, median performance for that series is indicated. Follow these guidelines for interpreting the performance curves: Horsepower 1. Locate operating speed on the correct horizontal axis of the bottom chart 2. Read Horsepower from the correct curve in the bottom chart Torque 1. Locate operating speed on the correct horizontal axis of the bottom chart 2. Read Torque from the correct curve in the bottom chart Air Consumption 1. Locate operating speed on the correct horizontal axis on the bottom chart 2. Read Air Consumption from the correct curve in the top chart Maximum Allowable Shaft Radial Load On applications where Shaft Radial Load is a factor: 1. Locate operating speed on the horizontal axis of the top chart 2. Read Shaft Radial Load on the correct Load Curve in the top chart CURVE B 214 153 17 76.5 SHAFT RADIAL (LBS.) 58.7 CURVE A 321 229.5 176.1 133.5 69.3 117.4 89 46.2 44.5 SPEED 24 23.1 18 12 6 339 678 117 SPEED FOR DETERMINING SHAFT RADIAL 3.3 484M 484P 484Q 484S 484U 339 678 165 122 89 59 9 PSIG 7 PSIG 9 PSIG 7 PSIG 7 PSIG B A 9 PSIG 33 244 178 118 177 144 96 48 2.2 1.1 117 495 366 267 POWER () (SCFM) Two 1/3 Horsepower Motors The Ingersoll-Rand reversible Series M4 Air Motor shown weighs only 2 3 8 Ibs. It has integral gear reduction of 33 to 1 and a free speed of 45 rpm. The comparable horsepower 11 volt electric motor, with a free speed of 1725 rpm, weighs 15 1 2 Ibs. 2

Selection and Characteristics AIR MOTOR SELECTION AND CHARACTERISTICS Ingersoll-Rand offers two basic types of Air Motors: Vane Motors Are smaller, lighter and less expensive than piston motors of similar power. Simple in design and construction, they can be operated in most any position. Vane motors are available in a broad range of speeds, torques and power and are the most widely used type of air motor. Radial Piston Motors Operate at lower speeds than vane motors. Have excellent starting and speed control. Especially good for "lugging" heavy loads at slow speed. Standard operational position is horizontal. Reversible/Non-Reversible Air Motors Non-reversible air motors are rated at slightly higher speeds, torques, and horsepowers than reversible motors of the same family. Air Pressure When selecting air motors, remember that the specification listings show only one set of performance figures, at a particular pressure 9 psig. Air motors are designed to produce optimum performance at this pressure. Many other speeds, torques and power can be obtained from the same motor by regulating the pressure, air supply or exhaust. While they will operate at pressures below 4 psig, their performance may not be consistent. They can also be operated above 1 psig, but often at the expense of increased maintenance. A good rule to follow is to size an air motor based on approximately 7% of the lowest available air pressure. This will allow additional power for starting and possible overloading. See page 5 for performance characteristics at various air pressures. Maximum Power Ungoverned air motors develop maximum horsepower at approximately 5% of free (unloaded) speed while governed motors reach their peak horsepower at about 8% of free speed. The only governed motors in this catalog are the 22 and 55 Series listed on pages 26 and 27. Desired Operating Speed The desired operating speed, not the free and unloaded speed should be considered when selecting air motors. Ungoverned air motors should not be run unloaded. The performance curves in this catalog indicate the maximum speeds at which the motor should be operated. The nameplate stamped speed is present for identification only. Required Torque Equally important as the speed at which an air motor is to be run is the required torque. The combination of the two factors speed and torque determine the power of the desired motor. Care should be taken to differentiate between stall (maximum) and running torques when selecting air motors. Speed and Torque Starting torques are approximately 75% of stall torques. Operating or running torques at any speed can be approximated from motor performance curves or calculated using the formula: Torque (Ib.-ft.) = Torque (Nm) = Horsepower x 525 speed (revolutions per minute) Kilowatts x 955 speed (revolutions per minute) Shaft Radial Loads When an air motor is to be used with a pulley, sprocket, or gear on the shaft, the overhung load (perpendicular to the shaft), commonly called "shaft radial loading" must be considered. It is shown in the performance curves and is generally assumed to be applied at the mid-point of the keyway of the shaft. STALL STARTING POWER POWER SPEED Fig. 1. Torque and power curves for a typical air motor. Torque is maximum at zero speed and zero at free speed. Any loading will slow the motor. As the load increases, the speed decreases and the torque increases until the motor stalls. If the load is decreased, the motor speed increases and its torque output decreases to match the applied load. 3

Selection and Characteristics AIR MOTOR SELECTION AND CHARACTERISTICS (CONT.) Air System and Supply Once an air motor has been selected, it is important to ensure that the desired air pressure is available at the motor, while the motor is operating. A pressure reading at the compressor does not mean that the same pressure will be available to an operating air motor, because of possible restrictions and friction losses in the air system. Exhaust restrictions can also affect air motor operation, and are often the cause of performance problems. Inlet Controls When installing reversible air motors, a four-way valve or two three-way valves should be used to prevent blockage of the secondary Exhaust Port. This is the opposite Rotation Port to that which is being pressurized. Replacing Electric Motors with Air Motors Electric motors, with the exception of series wound direct current motors, have entirely different performance characteristics than air motors. Therefore, their torque and speed curves will not match. Many electric motors are oversized to allow for overloading and lower power air motors can be used as replacements. Ingersoll-Rand Assistance Your Ingersoll-Rand Air Motor distributor and factory representative are anxious to help with motor problems, applications and selections. STALL STARTING AT 9 PSIG (62 kpa) POWER AT 9 PSIG (62 kpa) POWER POWER AT 6 PSIG (414 kpa) AT 6 PSIG (414 kpa) SPEED Fig. 2. Typical Air Motor torque and power curves at two different air pressures. Note that speed, torque and power decrease as the air pressure decreases. 9:1 POWER 9:1 POWER 3:1 POWER, DIRECT DRIVE POWER 3:1, DIRECT DRIVE SPEED Fig. 3. Torque and power curves for geared and nongeared motors. Note that reducing rpm by gearing steepens the torque curve while maintaining power. Gearing is often used to reduce the speed and increase the torque of air motors. The greater the gear reduction, the steeper will be the torque curve; thus, the higher speed motor will be more susceptible to a drop in speed as a load is applied than the slower speed motor with additional gearing. 4

Varying Air Pressure HOW TO DETERMINE PERFORMANCE CHARACTERISTICS AT AIR PRESSURES OTHER THAN 9 PSIG As air pressure changes, the performance characteristics will change by the percentages given below. Ungoverned Air Motors Air Speed at Torque at Air Air Free Consumption Maximum Maximum Maximum Consumption Stall or Pressure Speed at Free Speed Power Horsepower Horsepower at Max. Power Starting Torque (psig) (rpm) (scfm) (hp) (rpm) (Ib.-ft.) (scfm) (Ib.-ft.) 4 8% 45% 3% 8% 37.5% 45% 45% 5 84% 56% 44% 84% 52.4% 56% 56% 6 88% 67% 58% 88% 65.9% 67% 67% 7 92% 78% 72% 92% 78.3% 78% 78% 8 96% 89% 86% 96% 89.6% 89% 89% 9 1% 1% 1% 1% 1.% 1% 1% 1 14% 111% 114% 14% 19.6% 111% 111% Example: Knowing the performance characteristics of a Model 384P reversible ungoverned Air Motor at 9 psig (62 kpa) it is a simple matter to determine its characteristics at another air pressure. Using the percentages from the table for 6 psig (414 kpa), the performance becomes: Characteristic Performance Percentage Performance At 9 psig Reduction At 6 psig Maximum Power (hp) 1.35 x 58% =.78 Free Speed (rpm) 44 x 88% = 387 Speed at Max Power (rpm) 215 x 88% = 189 Max (Stall) Torque (Ib.-ft.) 53.5 x 67% = 35.8 Torque at Max Power (Ib.-ft.) 33 x 65.9% = 21.7 Starting Torque (Ib.-ft.) 4 x 67% = 26.8 Air Consumption at Free Speed (scfm) 54 x 67% = 36.2 Air Consumption at Max (scfm) 44 x 67% = 29.5 Air Supply or Exhaust Regulation Reducing or restricting the amount of air supplied to the motor has a similar effect to reducing the air pressure. Choking or restricting the exhaust has a somewhat different effect, with the speed decreasing much more than the torque. The effects of changes in pressure, air supply and exhaust regulation are summarized in the table at the right: Exact variations in performance with "choked" motors are not tabulated; however, "on the job" tests will usually produce the desired results; sometimes from a combination of pressure adjustments and inlet and exhaust restrictions. Air Regulation Speed Torque Reduced air pressure, or Reduced Greatly restricting volume of air to Reduced motor Choking or restricting exhaust Greatly Reduced Reduced 5

-Series Power Motors SPECIFICATIONS NON-REVERSIBLE -.1 H.P. REVERSIBLE -.1 H.P. *Requires installation for reversible motors - shown on page 85.. 1 1. 8 8 2.16.51.12 1.44.34.8. 6 6. 4 4 POWER ().72.17.4. 2 2 SPEED ( RPM ) M o d e l 8 6 1 8 - A, 1 8 6 1 1 - A, 8 6 1 4 - A, 8 6 1 7 - A, 6 5 8 6 1 - A, 8 6 1 3 - A, 8 6 1 6 - A 3 8 1 6, 2 2 4, 3 1 3, 3 4, 9 5 3 6 6 9 9 STANDARD EQUIPMENT OPTIONS FOR MOTORS WITH THREAD SPINDLES 4158 EQUIPMENT OPTIONS 4157 6

Dimensions -Series Power Motors & Mounts -SERIES AND MOUNTING ACCESSORY DIMENSIONS 7

Series M2 Multi-Vane Air Motors SPECIFICATIONS Air Speed at Consumption Model Max. Power Max. Power Free Speed Starting Torque Stall Torque at Max. Power Weight hp kw rpm rpm Ib.-ft. Nm Ib.-ft. Nm scfm m 3 /m lb. kg Non-Reversible Direction of rotation is counterclockwise when facing the shaft. M2RHRAR3.25.19 12,25 26,.15.2.2.27 12..34 1.46 M2RHR4AR3.22.16 325 692.45.61.61.83 11.9.34 1.46 M2RHR6AR3.22.16 26 4385.72.98.96 1.3 11 9.34 1 1 8.49 M2RHR8AR3.22.16 152 324.98 1.33 1.31 1.78 11.9.34 1.46 M2RHR13AR3.19.14 88 184 1.36 2.5 1.82 2.47 11.8.33 1 1 8.5 M2RHR21AR3.19.14 555 1165 2.16 2.93 2.88 3.9 11.8.33 1 1 8.5 M2RHR28AR3.19.14 41 86 2.92 3.96 3.9 5.29 11.8.33 1 1 8.5 M2RHR44AR3.19.14 262 545 4.61 6.25 6.15 8.34 11.8.33 1 1 8.5 M2RHR11AR3.16.12 112 228 *8.32 *11.2 *11.1 *15. 11.7.33 1 3 16.54 M2RHR159AR3.16.12 71 145 *13.1 *17.7 *17.5 *23.7 11.7.33 1 3 16.54 Reversible M2RVRAR3.2.15 11,5 23,.13.18.18.24 9.8.28 1.46 M2RVR4AR3.17.13 345 69.4.54.54.73 9.7.27 1.46 M2RVR6AR3.17.13 193 386.64.87.86 1.17 9.7.27 1 1 8.49 M2RVR8AR3.17.13 1425 285.87 1.18 1.16 1.57 9.7.27 1.46 M2RVR13AR3.14.1 82 1645 1.17 1.58 1.56 2.11 9.6.27 1 1 8.5 M2RVR21AR3.14.1 52 145 1.85 2.51 2.47 3.35 9.6.27 1 1 8.5 M2RVR28AR3.14.1 385 77 2.5 3.39 3.34 4.53 9.6.27 1 1 8.5 M2RVR44AR3.14.1 24 485 3.96 5.37 5.28 7.16 9.6.27 1 1 8.5 M2RVR11AR3.11.8 14 29 *6.78 *9.19 *9.5 *12.2 9.5.27 1 3 16.54 M2RVR159AR3.11.8 66 132 *1.7 *14.5 *14.2 *19.3 9.5.27 1 3 16.54 ALL models must be operated with sufficient load to prevent speed from exceeding maximum allowable speed shown on performance curve. * Applications with these models must be limited to 12 lb.-ft. (16.3 Nm) torque. Performance figures are at 9 psig (62 kpa) air pressure. SHAFT RADIAL (LBS.) 24 16 8.96 1.44.7 1.5.44.66.14.21 SPEED 9 PSIG 24 48 72 SPEED FOR DETERMINING SHAFT RADIAL.24 9 PSIG 7 PSIG 9 PSIG 7 PSIG 15 1 5.16.8 POWER () (SCFM) 6.69 4.46 SHAFT RADIAL (LBS.) 4.26 2.84 3.15 2.1 1.98 1.32 24 16 8 SPEED 9 PSIG 7 PSIG 635 127 195 SPEED FOR DETERMINING SHAFT RADIAL.21 9 PSIG 7 PSIG 9 PSIG 15 1 5.14.7 POWER () (SCFM).48.35.22.7 7 PSIG 2.23 1.42 1.5.66 7 PSIG M2RHRAR3 M2RHR4AR3 M2RHR6AR3 M2RHR8AR3 9 18 24 152 112 48 34 224 27 72 456 336 M2RHR13AR3 M2RHR21AR3 M2RHR28AR3 M2RHR44AR3 635 127 4 3 185 8 6 37 195 12 9 555 8

Series M2 Multi-Vane Air Motors SHAFT RADIAL (LBS.) (12 MAXIMUM LIMIT) (12 MAXIMUM LIMIT) 8 24 16 8 SPEED 9 PSIG 7 PSIG 8 16 24 SPEED FOR DETERMINING SHAFT RADIAL.18 9 PSIG 7 PSIG 9 PSIG 15 1 5.12.6 6.3 4 7 PSIG POWER () (SCFM) 1.26.84 SHAFT RADIAL (LBS.).93.62.6.4.21.14 24 16 8 SPEED 9 PSIG 7 PSIG 2115 423 6345 SPEED FOR DETERMINING SHAFT RADIAL.18 9 PSIG 7 PSIG 15 1 5.12.6.42.31.2.7 9 PSIG POWER () (SCFM) 7 PSIG M2RHR11AR3 M2RHR159AR3 8 16 24 5 1 15 M2RVRAR3 M2RVR4AR3 M2RVR6AR3 M2RVR8AR3 8 16 2115 134 99 423 268 198 24 6345 42 297 5.64 3.76 1.88 SHAFT RADIAL (LBS.) 3.57 2.38 1.19 2.64 1.76.88 1.68 1.12.56 24 16 8 SPEED 9 PSIG 7 PSIG 57 114 171 SPEED FOR DETERMINING SHAFT RADIAL.15 9 PSIG 7 PSIG 9 PSIG 7 PSIG 15 1 5.1.5 POWER () (SCFM) SHAFT RADIAL (LBS.) (12 MAXIMUM LIMIT) 9.69 1.2 6.46 5.1 3.23 24 16 8 SPEED 7 14 215 SPEED FOR DETERMINING SHAFT RADIAL.12 9 PSIG 7 PSIG 9 PSIG 7 PSIG 9 PSIG 7 PSIG 15 1 5.8.4 POWER () (SCFM) M2RVR13AR3 M2RVR21AR3 M2RVR28AR3 M2RVR44AR3 57 114 36 27 17 72 54 34 171 18 81 51 M2RVR11AR3 M2RVR159AR3 7 14 21 45 9 135 9

Series M2 Multi-Vane Air Motors SERIES M2 DIMENSIONS 1.25" (31.75mm) 1.25" (31.75mm) SERIES M2 NUMBER SYMBOLIZATION M 2 RV R 28 A R3 Motor Rotation Air Inlet Gear Flange Shaft & Exhaust Ratio = Approximate horsepower range (.11 to.25) Rotation = RV Reversible RH Non-Reversible, Right Hand from Rear of Motor (CCW facing shaft) LH Non-Reversible, Left Hand from Rear of Motor (CW facing shaft) Air Inlet & Exhaust = R Rear, S Side (Side Inlet and Exhaust available on Reversible Models only) Gear Ratio = 28 is 1 to 28, 44 is 1 to 44, etc. Flange = A 2 Hole Flange, B 4 Hole Face Mounting Shaft = R3 3 8" Round Keyed T3 3 8"-24 UNF-2A Threaded. Threaded Shaft Extension is 1" (25.4mm) with Threaded Length from Shaft End of.87" (22mm). Threaded Shaft Pilot at End is.315" (8mm) Dia. Max. by.374" (9.5mm) Long S3 3 8" Square Drive Square Shaft Extension is 1.791" (45.5mm) 1.394" R (1.mm) 1.624" DIA (41.25mm).33" DIA (8.375mm) "A" FLANGE.125" SQ. KEY (3.175mm).625" LONG (15.88mm).3748" DIA.374" DIA (9.52mm) (9.5mm) 1.498" DIA 1.496" DIA (38.5mm) (38.mm) INLETS AND FLANGES CAN BE RELOCATED RELATIVE TO EACH OTHER IN INCREMENTS OF 15.965" DIA (24.5mm) #6-32 UNC-2B THD. 4-PLACES.325" (8.25mm) DEEP.88" (2.25mm) 1." (25.4mm).315" (8.mm) SHAFT RADIAL 1.34" DIA (33.125mm) FEMALE PILOT.671" DIA (17.5mm).669" DIA (17.mm).128" DEEP (3.25mm) "B" FLANGE 4 HOLE MOUNTING Mounting Face of "B" Flange Mounting Face of "A" Flange 1.34" DIA (33.125mm).345" (8.75mm) E NON-REVERSIBLE A DIMENSIONS 1.156" (29.38mm) 1.34" DIA (33.125mm) PRIMARY EXHAUST 1/8" NPT INLET 1/4" NPT EXHAUST 1/8" NPT 3-PLACES FORWARD INLET.665" (16.89mm) PRIMARY EXHAUST Gear Ratios A (Refer to Model No.) in. mm, 4, 8 4.989 126.73 6, 13, 21, 28, 44 5.51 139.93 11, 159 6.2 152.91 EQUIPMENT OPTIONS 2.1" (51.6mm) 1.34" DIA (33.125mm) Furnished with Cataloged Models Standard Options Extra Options 2 Hole Flange 4 Hole Face R144-212-1 Mounting Mounting 3 8" Square Drive Adapter, 1" long with 3 8" Round Keyed 3 8"-24 Threaded Shaft 3 8" -24 Female threads Shaft for use with Threaded Shaft. Side Inlet and Exhaust Housing Required for 3 8" Adapter (for Reversible (2) R2J-561 set screws Models only) (1) 8U-722 Bail Note: On all Series M2, M4, and M7 Air Motors, performance is the same for both directions of rotation. On Non-Reversible models, direction of rotation may be easily changed without the need of additional parts by inverting cylinder. E E REVERSIBLE 1.34" (33.125mm) 1.67" (42.44mm) OPTIONAL SIDE EXHAUST HOUSING FOR REVERSIBLE S.659" (16.75mm).556" (14.13mm).58" (14.72mm) 1/8" NPT 3-PLACES.522" (13.27mm)

-Series Power Motors SPECIFICATIONS NON-REVERSIBLE -.25 H.P. REVERSIBLE -.25 H.P. *Requires installation for reversible motors - shown on page 85.. 3. 2 4 9.36 9.84 5.7 6. 1.92 2.1 1.17 1.26.258.264 6.24 6.56 3.8 4. 1.28 1.4.78.84.172.176. 1 8. 1 2 POWER () 3.12 3.28 1.9 2..64.7.39.42.86.88. 6 SPEED ( RPM ) STANDARD EQUIPMENT M o d e l 7 5 3 7 - C, 7 5 3 7-2 - C, 7 5 4 2 - C, 6 7 5 4 7 - C, 5 9 7 5 3 6 - B, 7 5 3 6-2 - B, 7 5 4 1 - B, 4 7 7 5 4 6 - B, 4 6 5 7 5 3 5 - C, 7 5 3 5-2 - C, 7 5 4 - B 8 5 7 5 4 5 - B 8 7 5 3 4 - B, 7 5 3 4-2 - B, 7 5 3 9 - B 9 4 7 5 4 4 - B 8 9 7 5 3 3 - B, 7 5 3 3-2 - B, 7 5 3 8 - B 8 7 5 4 3 - B 7 5 6 1 3, 2 1 9, 8 6 1 3, 1 8 1 9, 7 7 1 2, 9 4 4, 4 1 1 2, 9 3 4, 3 9 5 8 1, 7 7 2, 6 5 5 8 1, 7 6 2, 6 4 2 5 8 8 8 8 2 2 5 7 8 8 6 7 1 3 6 5 4 1 3 5 5 2 5 OPTIONS FOR MOTORS WITH THREAD SPINDLES 37898 EQUIPMENT OPTIONS 37899 11

Dimensions -Series Power Motors & Mounts -SERIES AND MOUNTING ACCESSORY DIMENSIONS 12

Series M4 Multi-Vane Air Motors SPECIFICATIONS Air Speed at Consumption Model Max. Power Max. Power Free Speed Starting Torque Stall Torque at Max. Power Weight hp kw rpm rpm Ib.-ft. Nm Ib.-ft. Nm scfm m 3 /m lb. kg Non-Reversible Direction of rotation is counterclockwise when facing the shaft. M4RHRAR3.5.37 1, 18,.4.54.53.72 2..57 2 1 16.95 M4RHR4AR3.47.35 247 445 1.46 1.98 1.94 2.63 19.5.55 2 3 16 1. M4RHR6AR3.47.35 149 268 2.42 3.28 3.22 4.37 19.5.55 2 3 16 1. M4RHR11AR3.44.33 825 149 3.92 5.32 5.22 7.8 19..54 2 3 8 1.9 M4RHR15AR3.44.33 61 195 5.32 7.21 7.1 9.63 19..54 2 3 8 1.9 M4RHR23AR3.44.33 395 715 8.1 11. 1.8 14.6 19..54 2 3 8 1.9 M4RHR33AR3.44.33 28 55 11.5 15.6 15.4 2.8 19..54 2 3 8 1.9 M4RHR5AR3.41.31 175 315 *16.5 *22.4 *22.1 *3. 18.5.52 2 11 16 1.22 M4RHR83AR3.41.31 16 19 *27.5 *37.3 *36.7 *49.7 18.5.52 2 11 16 1.22 M4RHR167AR3.41.31 53 95 *55. *74.5 *73.3 *99.4 18.5.52 2 11 16 1.22 Reversible M4RVRAR3.4.3 8 16,.32.43.42.57 19..54 2 1 16.95 M4RVR4AR3.37.28 1975 3955 1.13 1.53 1.51 2.5 18.5.52 2 3 16 1. M4RVR6AR3.37.28 119 238 1.88 2.55 2.51 3.4 18.5.52 2 3 16 1. M4RVR11AR3.34.25 66 1325 3. 4.7 4. 5.42 18..51 2 3 8 1.9 M4RVR15AR3.34.25 485 975 4.7 5.52 5.43 7.36 18..51 2 3 8 1.9 M4RVR23AR3.34.25 315 635 6.23 8.45 8.3 11.2 18..51 2 3 8 1.9 M4RVR33AR3.34.25 225 45 8.85 12. 11.8 16. 18..51 2 3 8 1.9 M4RVR5AR3.31.23 14 28 *12.3 *16.7 *16.5 *22.4 17.5.5 2 11 16 1.22 M4RVR83AR3.31.23 84 169 *2.6 *27.9 *27.5 *37.3 17.5.5 2 11 16 1.22 M4RVR167AR3.31.23 42 85 *41.3 *56. *55. *74.5 17.5.5 2 11 16 1.22 ALL models must be operated with sufficient load to prevent speed from exceeding maximum allowable speed shown on performance curve. * Applications with these models must be limited to 33 lb.-ft. (44.7 Nm) torque. Performance figures are at 9 psig (62 kpa) air pressure. SHAFT RADIAL (LBS.) 3.48 2.32 2.1 1.4.57.38 45 3 15 SPEED 9 PSIG 7 PSIG 16 32 48 SPEED FOR DETERMINING SHAFT RADIAL.51 9 PSIG 7 PSIG 24 16 8.34.17 POWER () (SCFM) 19.5 13. SHAFT RADIAL (LBS.) 13.8 9.2 1.16 9.7 6.19 6.6 4.4 45 3 15 SPEED 9 PSIG 4 8 12 SPEED FOR DETERMINING SHAFT RADIAL.48 9 PSIG 7 PSIG 7 PSIG 24 16 8.32.16 POWER () (SCFM) 9 PSIG 7 PSIG 6.5 4.6 3 2.2 9 PSIG 7 PSIG M4RHRAR3 M4RHR4AR3 M4RHR6AR3 647 1294 16 964 32 1928 1941 48 2892 M4RHR11AR3 M4RHR15AR3 M4RHR23AR3 M4RHR33AR3 542 184 4 262 184 7 PSIG 8 524 368 1626 12 786 552 13

Series M4 Multi-Vane Air Motors SHAFT RADIAL (LBS.) (MAXIMUM LIMIT 33) (MAXIMUM LIMIT 33) 26 23.4 31.2 15.6 45 3 15 SPEED 9 PSIG 7 14 21 SPEED FOR DETERMINING SHAFT RADIAL.45 9 PSIG 7 PSIG 7 PSIG 24 16 8.3.15 SHAFT RADIAL (LBS.) 45 3 15 SPEED 34 68 12 SPEED FOR DETERMINING SHAFT RADIAL.36 24 16 8.24.12 4.35 3.1 2 1.47 26 13 7.8 9 PSIG POWER () (SCFM) SHAFT RADIAL (LBS.) 3. 2. 1.8 1.2.51.34 45 3 15 SPEED 9 PSIG 7 PSIG 135 27 45 SPEED FOR DETERMINING SHAFT RADIAL.39 9 PSIG 7 PSIG 9 PSIG 24 16 8.26.13 POWER () (SCFM) 7 PSIG 1..6.17 7 PSIG M4RHR5AR3 M4RHR83AR3 M4RHR167AR3 116 232 7 35 14 7 348 21 15 M4RVRAR3 M4RVR4AR3 M4RVR6AR3 546 192 135 813 27 1626 1638 45 2439 13.5 8.7 9.3 6.2 6 4 4.41 2.94 9 PSIG 9 PSIG 7 PSIG 7 PSIG 9 PSIG POWER () (SCFM) SHAFT RADIAL (LBS.) (MAXIMUM LIMIT 33) (MAXIMUM LIMIT 33) 3 2 24 3 18 12 45 3 15 SPEED 9 PSIG 7 PSIG 6 12 18 SPEED FOR DETERMINING SHAFT RADIAL.36 9 PSIG 7 PSIG 9 PSIG 7 PSIG 24 16 8.24.12 POWER () (SCFM) 7 PSIG 2 1 6 14 M4RVR11AR3 M4RVR15AR3 M4RVR23AR3 M4RVR33AR3 46 92 34 222 156 68 444 312 138 12 666 468 M4RVR5AR3 M4RVR83AR3 M4RVR167AR3 1 2 6 3 12 6 3 18 9

Series M4 Multi-Vane Air Motors SERIES M4 DIMENSIONS.394" R (1.mm).88" (2.25mm).125" SQ. KEY.4" (3.175mm) (1.mm).625" LONG (15.88mm) 1." (25.4mm) Mounting Face of "B" Flange Mounting Face of "A" Flange 1.757" DIA (44.625mm) A 1.46" (37.125mm) 2.88" (73.16mm) 1.757" DIA (44.625mm) 1.757" DIA (44.625mm) 1.25" (31.75mm) 1.25" (31.75mm).33" DIA (8.375mm) "A" FLANGE 1.624" DIA (41.25mm) INLETS AND FLANGES CAN BE RELOCATED RELATIVE TO EACH OTHER IN INCREMENTS OF 15 1.498" DIA 1.496" DIA (38.5mm) (38.mm).3748" DIA.374" DIA (9.52mm) (9.5mm) 1.313" DIA (33.35mm).315" (8.mm) 1.648" DIA (41.86mm) SHAFT RADIAL.345" (8.75mm) FEMALE PILOT 1.2" DIA (25.45mm) 1." DIA (25.4mm).128" DEEP (3.25mm) 1/4" NPT INLET 1.757" DIA (44.625mm) PRIMARY EXHAUST E 1/4" NPT 3-PLACES.718" (18.25mm).93" (22.92mm).876" (22.25mm) OPTIONAL SIDE EXHAUST HOUSING FOR REVERSIBLE S.984" (25.mm) FORWARD INLET.758" (19.25mm) 2.119" (53.81mm) E E #1-32 UNF-2B THD. 4-PLACES.375" (9.52mm) DEEP 3/8" NPT EXHAUST 1/4" NPT 3-PLACES PRIMARY EXHAUST "B" FLANGE 4 HOLE MOUNTING SERIES M4 NUMBER SYMBOLIZATION M 4 RV R 23 A R3 Motor Rotation Air Inlet Gear Flange Shaft & Exhaust Ratio = Approximate horsepower range (.31 to.5) Rotation = RV Reversible RH Non-Reversible, Right Hand from Rear of Motor (CCW facing shaft) LH Non-Reversible, Left Hand from Rear of Motor (CW facing shaft) Air Inlet & Exhaust = R Rear, S Side (Side Inlet and Exhaust available on Reversible Models only) Gear Ratio = 23 is 1 to 23, 33 is 1 to 33, etc. Flange = A 2 Hole Flange, B 4 Hole Face Mounting Shaft = R3 3 8" Round Keyed T3 3 8"-24 UNF-2A Threaded Threaded Shaft Extension is.512" (13mm) Full Thread Length is.424" (1.75mm) S3 3 8" Square Drive Square Shaft Extension is 1.791" (45.5mm) NON-REVERSIBLE DIMENSIONS REVERSIBLE Gear Ratios A (Refer to Model No.) in. mm, 4, 6 6.248 158.69 11, 15, 23, 33 6.984 177.38 5, 83, 167 7.745 196.73 EQUIPMENT OPTIONS Furnished with Cataloged Models Standard Options Extra Options 2 Hole Flange 4 Hole Face R144-212-1 Mounting Mounting 3 8" Square Drive Adapter, 1" long with 3 8" Round Keyed 3 8"-24 Threaded Shaft 3 8" -24 Female threads Shaft for use with Threaded Shaft. Side Inlet and Exhaust Housing Required for 3 8" Adapter (for Reversible (2) R2J-561 set screws Models only) Note: On all Series M2, M4, and M7 Air Motors, performance is the same for both directions of rotation. On Non-Reversible models, direction of rotation may be easily changed without the need of additional parts by inverting cylinder. See Assembly Instruction form number listed in price sheet. 15

-Series Power Motors with -Series Gearing SPECIFICATIONS NON-REVERSIBLE -.6 H.P. REVERSIBLE -.5 H.P. *Requires installation for reversible motors - shown on page 85.. 6 5. 5 5. 5 2. 4 4 28.8 23.52 17.76 14.4 9. 5.4 4.2 2.58.84 19.2 15.68 11.84 9.6 6. 3.6 2.8 1.72.56. 3 9. 2 6 POWER () 23.28 18.6 14.16 11.4 7.8 4.2 3.48 2.4.63 15.52 12.4 9.44 7.6 4.72 2.8 2.32 1.36.42. 3 3. 2 2 POWER () 9.6 7.84 5.92 4.8 3. 1.8 1.4.86.28. 1 3 7.76 6.2 4.72 3.8 2.36 1.4 1.16.68.21. 1 1 SPEED ( RPM ) SPEED ( RPM ) M o d e l 8 2 2 9-1 A, 8 2 3-1 A, 8 2 3 2-1, 8 2 2 9-2 A, 8 2 3-2 A, 8 2 3 2-2, 8 8 2 2 9-3 A, 8 2 3-3 A, 8 2 3 2-3, 1 1 8 2 2 9-4 A, 8 2 3-4 A, 8 2 3 2-4 8 8 8 2 2 9-5 A, 8 2 3-5 A, 8 2 3 2-5 2 8 2 2 9-6 A, 8 2 3-6 A, 8 2 3 2-6 1 5 8 2 2 9-7 A, 8 2 3-7 A, 8 2 3 2-7 5 2 8 2 2 9-8 A, 8 2 3-8 A 8 9 8 2 2 9-9 A, 8 2 3-9 A 5 9 STANDARD EQUIPMENT 6 1 2, 1 8, 1 3, 6 5, 4 1 2, 2 2 3, 3 3 8 1, 7 7 6 2, 6 6 4 5 1, 4 1, 5 6 3 6 3 9 4 5 2 5 4 7 5 6 1 3 7 8 5 6 7 1 3 1 8 4 7 7 M o d e l 8 2 3 1-1 B 5, 7 1 1, 4 1 7, 1 8 2 3 1-2 B 1, 6 8 3, 3 6 5, 4 8 2 3 1-3 B 1, 2 2, 4 3, 6 8 2 3 1-4 B 8 2 5 1, 6 5 2, 4 7 5 8 2 3 1-5 B 4 7 1 9 4 2 1, 4 1 3 8 2 3 1-6 B 3 6 9 8 2 3 1-7 B 2 3 7 4 7 4 7 1 1 8 2 3 1-8 B 1 8 3 3 6 6 5 4 9 8 2 3 1-9 B 1 5 3 4 5 OPTIONS FOR MOTORS WITH THREADED SPINDLES EQUIPMENT OPTIONS 37896 37897

Dimensions -Series Power Motors & Mounts -SERIES AND MOUNTING ACCESSORY DIMENSIONS 5.16 17

-Series Power Motors with 22 Series Gearing SPECIFICATIONS NON-REVERSIBLE -.6 H.P. REVERSIBLE -.5 H.P. *Requires installation for reversible motors - shown on page 85. 1. 5 5. 8. 4 4 126. 72. 6. 32.4 147. 84. 48. 4. 21.6. 6. 4 POWER () 54. 3. 24. 16.56 13.44 4.2 3.48 44. 36. 2. 16. 11.4 8.96 2.8 2.32 45.92 36.8 22. 18. 1. 8. 5.52 4.48 1.4 1.16. 3 3. 2 2. 1 1 POWER () 136.5 73.5 42. 24. 2. 1.8. 2 42.6 34. SPEED ( RPM ) SPEED ( RPM ) M o d e l 8 2 7 6-1 A 2 2 5 4 5 6 7 5 8 2 7 6-2 A 1 1 2 2 2 4 3 3 6 8 2 7 6-3 A 9 7 1 9 4 2 9 1 8 2 7 6-4 A 5 2 1 4 1 5 6 8 2 7 6-5 A * 3 2 6 4 9 6 8 2 7 6-6 A * 1 6 3 2 4 8 * N O T E : Maximum torque recommended for p l a n e t a r y g e a r s y s t e m o n t h ese models r e q u i r e s s h e a r k e y w i th 15 ft. / lbs. s h e a r s t r e n g t h. STANDARD EQUIPMENT M o d e l 8 2 2 8-2 B 1, 2 2, 4 3, 6 8 2 2 8-3 B 8 2 5 1, 6 5 2, 4 7 5 8 2 2 8-5 B 2 5 5 5 1 7 6 5 8 2 2 8-6 B 2 4 4 8 6 1 2 8 2 2 8-7 B 1 3 5 2 7 4 5 8 2 2 8-8 B 1 1 1 2 2 2 3 3 3 8 2 2 8-9 B 6 3 1 2 6 1 8 9 8 2 2 8-1 B 5 1 1 2 1 5 3 8 2 2 8-1 1 B * 3 2 6 4 9 6 8 2 2 8-1 2 B * 2 7 5 4 8 1 8 2 2 8-1 3 B * 1 6 3 2 4 8 8 2 2 8-1 4 B * 1 3 2 6 3 9 * N O T E : Maximum torque recommended for p l a n e t a r y g e a r system on t h ese models r e q u i r e s s h e a r k e y with 6 ft. / lbs. s h e a r s t r e n g t h. NO-COST OPTIONS FURNISHED WHEN SPECIFIED ON ORIGINAL ORDER EQUIPMENT OPTIONS 37895-1

Dimensions /22-Series Power Motors & Mounts /22-SERIES AND MOUNTING ACCESSORY DIMENSIONS 19

Series M7 Multi-Vane Air Motors SPECIFICATIONS Air Speed at Consumption Model Max. Power Max. Power Free Speed Starting Torque Stall Torque at Max. Power Weight hp kw rpm rpm Ib.-ft. Nm Ib.-ft. Nm scfm m 3 /m lb. kg Non-Reversible Direction of rotation is counterclockwise when facing the shaft. M7RHRAR4.85.63 11, 22,.58.79.77 1.4 36 1.2 3 1 16 1.4 M7RHR4AR4.82.61 2445 489 2.39 3.24 3.19 4.33 36 1.2 3 1 16 1.4 M7RHR6AR4.82.61 1675 335 3.5 4.75 4.66 6.32 36 1.2 3 1 16 1.4 M7RHR9AR4.82.61 123 246 4.76 6.45 6.34 8.6 36 1.2 3 1 16 1.4 M7RHR12AR4.79.59 87 174 6.19 6.39 8.25 11.2 36 1.2 3 1 2 1.6 M7RHR15AR4.79.59 685 137 7.8 1.6 1.4 14.1 36 1.2 3 1 2 1.6 M7RHR21AR4.79.59 47 94 11.5 15.6 15.3 2.7 36 1.2 3 1 2 1.6 M7RHR27AR4.79.59 37 74 14.5 19.7 19.3 26.2 36 1.2 3 1 2 1.6 M7RHR37AR4.79.59 27 54 19.7 26.7 26.3 35.7 36 1.2 3 1 2 1.6 M7RHR44AR4.79.59 232 465 23.2 31.5 3.9 41.9 36 1.2 3 1 2 1.6 M7RHR63BR6.79.59 161 321 33.5 45.4 44.7 6.6 36 1.2 7 1 8 3.2 M7RHR86BR6.79.59 118 236 45.7 62. 6.9 82.6 36 1.2 7 1 8 3.2 M7RHR119BR6.76.57 82 163 6.5 82. 8.7 19. 36 1.2 7 3 8 3.4 M7RHR151BR6.76.57 65 129 76.5 14. 12. 138. 36 1.2 7 3 8 3.4 M7RHR188BR6.76.57 52 13 96. 13. 128. 174. 36 1.2 7 3 8 3.4 M7RHR275BR6.76.57 35 7 *14. *19. *187. *254. 36 1.2 7 3 8 3.4 M7RHR374BR6.76 57 26 52 *191. *259. *254. *344. 36 1.2 7 3 8 3.4 Reversible M7RVRAR4.7.52 1, 2,.47.64.63.85 33.93 3 1 16 1.4 M7RVR4AR4.67.5 2225 445 1.94 2.63 2.59 3.51 33.93 3 1 16 1.4 M7RVR6AR4.67.5 152 345 2.84 3.85 3.78 5.13 33.93 3 1 16 1.4 M7RVR9AR4.67.5 112 224 3.86 5.23 5.14 6.97 33.93 3 1 16 1.4 M7RVR12AR4.64.48 79 158 4.97 6.74 6.63 8.99 33.93 3 1 2 1.6 M7RVR15AR4.64.48 625 125 6.29 8.53 8.38 11.4 33.93 3 1 2 1.6 M7RVR21AR4.64.48 425 855 9.2 12.5 12.2 16.5 33.93 3 1 2 1.6 M7RVR27AR4.64.48 335 675 11.6 15.7 15.5 2.1 33.93 3 1 2 1.6 M7RVR37AR4.64.48 245 495 15.8 21.4 21.1 28.6 33.93 3 1 2 1.6 M7RVR44AR4.64.48 21 42 18.6 25.2 24.8 33.6 33.93 3 1 2 1.6 M7RVR63BR6.64.48 146 292 26.9 36.5 35.9 48.7 33.93 7 1 8 3.2 M7RVR86BR6.64.48 17 215 36.7 49.8 48.9 66.3 33.93 7 1 8 3.2 M7RVR119BR6.61.46 74 148 48.1 65.3 64.1 87. 33.93 7 3 8 3.4 M7RVR151BR6.61.46 58 117 61. 82.7 81.3 11. 33.93 7 3 8 3.4 M7RVR188BR6.61.46 47 94 76.5 14. 12. 138. 33.93 7 3 8 3.4 M7RVR275BR6.61.46 32 64 *111. *151. *148. *21. 33.93 7 3 8 3.4 M7RVR374BR6.61.46 23 47 *152. *26. *22. *274. 33.93 7 3 8 3.4 ALL models must be operated with sufficient load to prevent speed from exceeding maximum allowable speed shown on performance curve. * Applications with these models must be limited to 224 lb.-ft. (34 Nm) torque. Performance figures are at 9 psig (62 kpa) air pressure. Note: On all Series M2, M4, and M7 Air Motors, performance is the same for both directions of rotation. On Non-Reversible models, direction of rotation may be easily changed without the need of additional parts by inverting cylinder. See Assembly Instruction form number listed in price sheet. 2

Series M7 Multi-Vane Air Motors 6.84 4.56 SHAFT RADIAL (LBS.) 5.4 3.36 3.45 2.3.84.56 6 4 2 SPEED 17 34 51 SPEED FOR DETERMINING SHAFT RADIAL.9 9 PSIG 7 PSIG 9 PSIG 7 PSIG 45 3 15.6.3 POWER () (SCFM) 66.3 44.2 48.6 32.4 33.6 22.4 28.5 19. 21. 14. SHAFT RADIAL (LBS.) 16.8 11.2 11.4 SHAFT RADIAL (LBS.) 6 4 2 SPEED 155 31 465 SPEED FOR DETERMINING SHAFT RADIAL.75 45 3 15.5.25 POWER () (SCFM) 1.89 1.39.95.23 7.6 2.28 1.68 1.15.28 9 6 12 8 4 SPEED 9 PSIG 6 12 18 SPEED FOR DETERMINING SHAFT RADIAL.84 9 PSIG 7 PSIG 7 PSIG B A 45 3 15.56.28 POWER () (SCFM) 9 PSIG 7 PSIG 22.1 16.2 11.2 9.5 7. 5.6 3.8 3 9 PSIG 7 PSIG (MAXIMUM LIMIT 224) 182 (MAXIMUM LIMIT 224) 21 134 M7RHRAR4 M7RHR4AR4 M7RHR6AR4 M7RHR9AR4 SHAFT RADIAL (LBS.) 138 92 111 74 87 58 12 8 4 7635 1527 17 1164 855 34 2328 171 SPEED 9 PSIG 7 PSIG 2295 51 3492 2565 58 116 174 SPEED FOR DETERMINING SHAFT RADIAL.84 9 PSIG 7 PSIG 9 PSIG 45 3 15.56.28 POWER () (SCFM) 5.67 3.78 4.17 2.78 2.85 1.9.69.46 M7RHR12AR4 M7RHR15AR4 M7RHR21AR4 M7RHR27AR4 M7RHR37AR4 M7RHR44AR4 M7RHR63BR6 M7RHR86BR6 6 12 474 325 256 11 81 9 PSIG 9 PSIG 7 PSIG 948 65 512 22 162 7 PSIG 18 1422 975 768 188 376 564 16 32 48 33 243 91 67 46 37 29 CURVE CURVE A B 7 PSIG 9 PSIG 7 PSIG M7RHR119BR6 M7RHR151BR6 M7RHR188BR6 M7RHR275BR6 M7RHR374BR6 58 116 46 37 25 18 92 74 5 36 54 174 138 111 75 M7RVRAR4 M7RVR4AR4 M7RVR6AR4 M7RVR9AR4 6965 1393 155 16 78 31 212 156 2895 465 318 234 21

Series M7 Multi-Vane Air Motors 55.5 37. 4.8 27.2 SHAFT RADIAL (LBS.) 12 8 4 18.8 28.2 16. 24. 11.8 17.7 9.2 13.8 6.4 9.6 5. 7.5 SPEED 9 PSIG 55 11 165 SPEED FOR DETERMINING SHAFT RADIAL.69 9 PSIG 7 PSIG 7 PSIG B A 45 3 15.46.23 POWER () (SCFM) (MAXIMUM LIMIT 224) 219 (MAXIMUM LIMIT 224) 159 SHAFT RADIAL (LBS.) 111 9 69 146 16 74 6 46 12 8 4 SPEED 52 14 156 SPEED FOR DETERMINING SHAFT RADIAL.66 9 PSIG 7 PSIG 9 PSIG 7 PSIG 45 3 15.44.22 POWER () (SCFM) 18.5 13.6 9.4 8. 5.9 4.6 3.2 2.5 9 PSIG 7 PSIG 73 53 37 3 23 9 PSIG 7 PSIG M7RVR12AR4 M7RVR15AR4 M7RVR21AR4 M7RVR27AR4 M7RVR37AR4 M7RVR44AR4 55 11 435 298 235 87 596 47 165 135 894 75 173 346 519 147 294 441 CURVE A M7RVR119BR6 M7RVR151BR6 M7RVR188BR6 M7RVR275BR6 M7RVR374BR6 52 14 41 33 22 17 82 66 44 34 156 123 99 66 51 M7RVR63BR6 M7RVR86BR6 12 75 24 15 36 225 CURVE B EQUIPMENT OPTIONS Furnished with Cataloged Models 2 Hole Flange Mounting on Gear Ratios:, 4, 6, 9, 12, 15, 21, 27, 37, 44 6 Hole Face Mounting on Gear Ratios: 63, 86, 119, 151, 188, 275, 374 1 2" Round Keyed Shaft on Gear Ratios:, 4, 6, 9, 12, 15, 21, 27, 37, 44 3 4" Round Keyed Shaft on Gear Ratios: 63, 86, 119, 151, 188, 275, 374 Standard Options 4 Hole Flange Mounting on Gear Ratios:, 4, 6, 9, 12, 15, 21, 27, 37, 44 Side Inlet and Exhaust Housing (for Reversible Models only) 3 8" 24 or 1 2" 2 Threaded Shaft on Gear Ratios:, 4, 6, 9, 12, 15, 21, 27, 37, 44 Extra Options 1 2" Square Drive Shaft on Gear Ratios:, 4, 6, 9, 12, 15, 21, 27, 37, 44 5 8" Square Drive Shaft on Gear Ratios: 63, 86, 119, 151, 188, 275, 374 22

Series M7 Multi-Vane Air Motors SERIES M7 DIMENSIONS.394" R (1.mm).499" DIA.498" DIA (12.68mm) (12.65mm) 1.94" (27.79mm).345" (8.75mm).125" SQ. KEY (3.175mm).625" LONG (15.88mm) A 3.4" (86.3mm) 1.66" (42.mm) INLETS AND FLANGES CAN BE RELOCATED RELATIVE TO EACH OTHER IN INCREMENTS OF 15.75" DIA.7495" DIA (19.5mm) (19.3mm) 1.751" DIA 1.75" DIA (44.48mm) (44.45mm).33" DIA (8.375mm) 1.25" (31.75mm) 1.25" (31.75mm) 1/4-2 UNC-2B THD. 4 HOLES.4" DEEP (1.25mm) 1.625" DIA (41.3mm).187" SQ. KEY (4.76mm) 1.5" LONG (38.mm).14".125" (3.57mm) (3.17mm) 2.69" DIA (68.mm) 2.18" DIA (51.25mm) 2.8" (51.mm) 1.498" DIA 1.496" DIA (38.5mm) (38.mm).37" (9.mm).88" (2.25mm) A SHAFT RADIAL 1.56" (26.83mm) FEMALE PILOT 1.252" DIA (31.8mm) 1.25" DIA (31.75mm).131" DEEP (3.33mm) 2.8" DIA (51.mm) E NON-REVERSIBLE 1/4" NPT INLET 1/2" NPT EXHAUST 2.8" DIA 2.8" DIA (51.mm) (51.mm) GEAR RATIOS, 4, 6, 9, 12, 15, 21, 27, 37, 44.871" (22.13mm).94" (23.88mm) 1/4" NPT 3-PLACES E REVERSIBLE 2.7" (51.mm) FORWARD INLET PRIMARY EXHAUST 5/16-18 UNC-2B THD. 6 HOLES.43" DEEP (11.mm) 2.25" DIA (57.15mm).875" (22.mm) 1.78" (45.mm) 2.19" (56.mm) SHAFT RADIAL SERIES M7 NUMBER SYMBOLIZATION B C GEAR RATIOS 63, 86, 119, 151, 188, 275, 374 M 7 RV R 21 A R4 Motor Rotation Air Inlet Gear Flange Shaft & Exhaust Ratio = Approximate horsepower range (.61 to.85) Rotation = RV Reversible RH Non-Reversible, Right Hand from Rear of Motor (CCW facing shaft) LH Non-Reversible, Left Hand from Rear of Motor (CW facing shaft) Air Inlet & Exhaust = R Rear, S Side (Side Inlet and Exhaust available on Reversible Models only) Gear Ratio = 21 is 1 to 21, 27 is 1 to 27, etc. 1.69" (43.mm).871" (22.13mm) PRIMARY EXHAUST DIMENSIONS E 1/4" NPT 3-PLACES FORWARD INLET.812" (2.63mm) 2.212" (56.2mm) OPTIONAL SIDE EXHAUST HOUSING FOR REVERSIBLE S Gear Ratios A B C (Refer to Model No.) in. mm in. mm in. mm, 4, 6, 9 7.362 187. 12, 15, 21, 27, 37, 44 8.133 26.56 63, 86 9.343 237.3.41 1 2.3 58.4 119, 188, 275, 374, 151 1.937 277.8 2.19 56 3.9 99. 2 HOLE A FLANGE MOUNTING 4 HOLE B FACE MOUNTING Flange = A 2 Hole Flange, B 4 Hole Face Mounting (on, 4, 6, 9, 12, 15, 21, 27, 37, 44 gear ratios), B 6 Hole Face Mounting (on 63, 86, 119, 151, 188, 275, 374 gear ratios). Shaft = R4 1 2" Round Keyed (on, 4, 6, 9, 12, 15, 21, 27, 37, 44 gear ratios). R6 3 4" Round Keyed (on 63, 86, 119, 151, 188, 275, 374 gear ratios). S4 1 2" Square Drive (on, 4, 6, 9, 12, 15, 21, 27, 37, 44 gear ratios). Shaft Extension 1.31" (33.27mm) S5 5 8" Square Drive (on 63, 86, 119, 151, 188, 275, 374 gear ratios). Shaft Extension 1.25" (31.75mm) T3 3 8"-24 UNF-2A Threaded (on, 4, 6, 9, 12, 15, 21, 27, 37, 44 gear ratios). Shaft Extension.512" (13mm) T4 1 2" 2 UNF-2A Threaded (on, 4, 6, 9, 12, 15, 21, 27, 37, 44 gear ratios). Shaft Extension.512" (13mm) 6 HOLE B FACE MOUNTING 23

22-Series Power Motors with Thread-On Gearing SPECIFICATIONS NON-REVERSIBLE -.85 H.P. REVERSIBLE -.7 H.P. *Requires installation for reversible motors - shown on page 85.. 9. 7 5. 7 2. 6 66. 36. 19.2 9. 4.8 1.2 44. 24. 12.8 6. 3.2.8. 5 4. 3 6 POWER () 64.8 34.8 18.6 8.88 4.8 1.2 43.2 23.2 12.4 5.92 3.2.8. 4 5. 3 POWER () 22. 12. 6.4 3. 1.6.4. 1 8 21.6 11.6 6.2 2.96 1.6.4. 1 5 SPEED ( RPM ) SPEED ( RPM) M o d e l 7 8 - B ( - 1 B, - 2 B, - 4 B ), 7 1 1, 4 7 8 1 - B ( - 1 B, - 2 B, - 3 B, - 4 B ), 4 4 2, 8 8 7 8 2 - B ( - 1 B, - 2 B, - 4 B ) 7 9 5, 5 9 7 8 3 - B ( - 1 B, - 2 B, - 3 B, - 4 B ) 3 7 8 5 6 7 8 4 - B ( - 1 B, - 2 B, - 3 B ) 2 4 8 7 8 5 - B ( - 1 B, - 3 B, - 4 B ) 1 1 2 5 1 7, 1 1 4, 3 2 1 2, 3 8 5 7 1, 1 3 4 4 6 1 2 2 3 3 M o d e l 7 8 6 - B ( - 1 B ) 4, 3 8 5 8, 7 7 1 3, 1 5 5 7 8 7 - B ( - 1 B ) 1, 8 6 2, 1 7 2 3, 2 5 8 7 8 8 - B ( - 1 B ) 5 7 6 1, 1 5 2 1, 7 2 8 7 8 9 - B ( - 1 B ) 2 7 3 5 4 6 8 1 9 7 8 1 - B ( - 1 B ) 1 4 4 2 8 8 4 3 2 7 8 1 1 - B ( - 1 B ) 8 1 6 2 4 37893 STANDARD EQUIPMENT OPTIONS FOR FORWARD-ROTATION S WITH THREADED SPINDLES 37894 EQUIPMENT OPTIONS 24

Dimensions 22-Series power Motors & Mounts 22-SERIES AND MOUNTING ACCESSORY DIMENSIONS G H I L 25

22-Series Power Motors with Bolt-On Gearing SPECIFICATIONS NON-REVERSIBLE -.85 H.P. REVERSIBLE -.7 H.P. *Requires installation for reversible motors - shown on page 85.. 9. 9. 7 2. 7 2 66. 36. 19.2 9. 4.8 1.2 44. 24. 12.8 6. 3.2.8. 5 4. 3 6 POWER () 66. 36. 19.2 9. 4.8 1.2 44. 24. 12.8 6. 3.2.8. 5 4. 3 6 POWER () 22. 12. 6.4 3. 1.6.4. 1 8 22. 12. 6.4 3. 1.6.4. 1 8 SPEED ( RPM ) SPEED ( RPM ) M o d e l 7 8 - B ( - 1 B, - 2 B, - 4 B ), 7 1 1, 4 7 8 1 - B ( - 1 B, - 2 B, - 3 B, - 4 B ), 4 4 2, 8 8 7 8 2 - B ( - 1 B, - 2 B, - 4 B ) 7 9 5, 5 9 7 8 3 - B ( - 1 B, - 2 B, - 3 B, - 4 B ) 3 7 8 5 6 7 8 4 - B ( - 1 B, - 2 B, - 3 B ) 2 4 8 7 8 5 - B ( - 1 B, - 3 B, - 4 B ) 1 1 2 5 1 7, 1 1 4, 3 2 1 2, 3 8 5 7 1, 1 3 4 4 6 1 2 2 3 3 M o d e l 7 8 1 4 - B ( - 1 B ) 5, 7 1 1, 4 1 7, 1 7 8 1 6 - B ( - 1 B ) 1, 4 4 2, 8 8 4, 3 2 7 8 1 7 - B ( - 1 B ) 7 9 5 1, 5 9 2, 3 8 5 7 8 1 5 - B ( - 1 B ) 3 7 8 7 5 6 1, 1 3 4 7 8 1 3 - B ( - 1 B ) 2 4 4 8 6 1 2 7 8 1 2 - B ( - 1 B ) 1 1 2 2 3 3 2 2 SERIES POWER MOTORS STANDARD EQUIPMENT OPTIONS FOR FORWARD-ROTATION S WITH THREADED SPINDLES EQUIPMENT OPTIONS 37895-1 26

Dimensions 22-Series Power Motors & Mounts 22-SERIES AND MOUNTING ACCESSORY DIMENSIONS 27

22-Series Power Motors with 44-Series Gearing SPECIFICATIONS NON-REVERSIBLE -.9 H.P. REVERSIBLE -.65 H.P. *Requires installation for reversible motors - shown on page 85.. 7 5 1. 6. 8 126. 72. 6. 32.4 147. 84. 48. 4. 21.6 136.5 73.5 42. 24. 2. 1.8. 6. 4. 2 POWER () 19.2 62.4 51.6 27.6 15.6 127.4 72.8 41.6 34.4 18.4 1.4 118.29 63.7 36.4 2.8 17.2 9.2 5.2. 4 5. 3. 1 5 POWER () SPEED ( RPM ) SPEED ( RPM ) M o d e l 8 2 7 6-1 A 2 2 5 4 5 6 7 5 8 2 7 6-2 A 1 1 2 2 2 4 3 3 6 8 2 7 6-3 A 9 7 1 9 4 2 9 1 8 2 7 6-4 A 5 2 1 4 1 5 6 8 2 7 6-5 A * 3 2 6 4 9 6 8 2 7 6-6 A * 1 6 3 2 4 8 * N O T E : Maximum torque recommended for p l a n e t a r y g e a r s y s t e m o n t h ese models r e q u i r e s s h e a r k e y w i th 15 ft. / lbs. s h e a r s t r e n g t h. M o d e l 8 2 7 4 - A 2 5 5 5 1 7 6 5 8 2 7 4-1 A 1 5 3 3 6 4 5 9 8 2 7 4-2 A 7 8 1 5 6 2 3 4 8 2 7 4-3 A 6 3 1 2 6 1 8 9 8 2 7 4-4 A 3 8 7 6 1 1 4 8 2 7 4-5 A * 2 1 4 2 6 3 8 2 7 4-6 A * 1 1 2 2 3 3 * N O T E : Maximum torque recommended for p l a n e t a r y g e a r s y s t e m o n t h ese models r e q u i r e s s h e a r k e y w i th 15 ft. / lbs. s h e a r s t r e n g t h. STANDARD EQUIPMENT OPTIONS FOR SPECIFIED S 37892-1 EQUIPMENT OPTIONS See page 168. 28 See page 168.

Dimensions 22/44-Series Power Motors & Mounts 22/44-SERIES AND MOUNTING ACCESSORY DIMENSIONS 29

Series 181 and 1841 Multi-Vane Air Motors SPECIFICATIONS Air Speed at Consumption Model Max. Power Max. Power Free Speed Starting Torque Stall Torque at Max. Power Weight hp kw rpm rpm Ib.-ft. Nm Ib.-ft. Nm scfm m 3 /m lb. kg Non-Reversible Direction of rotation is counterclockwise when facing the shaft. 181N 1.4 1.4 918 199 1.5 14.2 14 19. 46 1.3 5 3 8 2.44 181P 1.35 1.1 5 15 17.2 23.3 23 31.2 46 1.3 5 3 4 2.61 181Q 1.35 1.1 3 65 3. 4.7 4 54.2 46 1.3 5 3 4 2.61 181U 1.35 1.1 25 435 41. 55.6 55 74.6 46 1.3 5 3 4 2.61 181W 1.35 1.1 175 37 52. 7.5 7 94.9 46 1.3 5 3 4 2.61 Reversible 1841N 1.2.89 8 17 9.3 12.6 12.5 17. 43 1.22 5 1 2 2.5 1841P 1.1.82 43 9 15. 2.3 2. 27.1 43 1.22 5 7 8 2.67 1841Q 1.1.82 26 55 27. 36.6 36. 48.8 43 1.22 5 7 8 2.67 1841U 1.1.82 175 38 37. 5.2 5. 67.8 43 1.22 5 7 8 2.67 1841W 1.1.82 15 32 45. 61. 6. 81.4 43 1.22 5 7 8 2.67 ALL models must be operated with sufficient load to prevent speed from exceeding maximum allowable speed shown on performance curve. Performance figures are at 9 psig (62 kpa) air pressure. 25.4 5.8 76.2 59.7 39.8 19.9 SHAFT RADIAL (LBS.) 43.5 29 14.5 25.2 16.8 8.4 15.3 1.2 5.1 12 8 4 SPEED 691 1382 273 SPEED FOR DETERMINING SHAFT RADIAL 1.5 9 PSIG 7 PSIG 9 PSIG 7 PSIG 9 PSIG 7 PSIG 63 42 21 1..5 POWER () (SCFM) 22.7 45.4 68.1 56.7 37.8 18.9 SHAFT RADIAL (LBS.) 4.8 27.2 13.6 22.8 15.2 7.6 14.4 9.6 4.8 12 8 4 SPEED 9 PSIG 7 PSIG 59 118 177 SPEED FOR DETERMINING SHAFT RADIAL 1.29 9 PSIG 7 PSIG 9 PSIG 7 PSIG 6 4 2.86.43 POWER () (SCFM) 181N 181P 181Q 181U 691 1382 365 226 151 73 452 32 273 195 678 453 181W 128 256 384 1841N 1841P 1841Q 1841U 59 118 313 191 132 626 382 264 177 939 573 396 1841W 111 222 333 3

Series 181 and 1841 Multi-Vane Air Motors SERIES 181 AND 1841 DIMENSIONS KEY 3/16" SQ. x 7/8" (4.76mm SQ. x 22.mm) 1.75" +.1" (44.45mm +.25mm) DIA 1-3/4" (45.mm) 1-3/8" (35.mm) 1/8" + 1/64" (3.17mm +.4mm) A B 3/4" (19.mm) 1-1/8" (28.575mm) 1-1/8" (28.575mm) 5/16-18 UNC-2B 2 HOLES 5/8" (16.mm) DEEP 2-1/32" (52.mm) DIA 1/2" (13.mm).625".5" (15.875mm.127mm) DIA 1/2" (13.mm) SHAFT RADIAL 43/64" (17.mm) 1-13/32" (36.mm) 1-13/32" (36.mm) 2-13/16" (71.mm) DIA OPTIONAL 3/4" NPT PIPED-AWAY EXHAUST (36 ROTATABLE) 2-5/16" (59.mm) DIA 1-5/8" (41.mm) DIA 1-15/16" (49.mm) 2." (51.mm) REVERSE INLET 9/16" (14.mm) 3/8" NPT INLETS FORWARD INLET DIMENSIONS A B Models in. mm in. mm 181N, 1841N 9 7 16 24 6 15 16 176 SERIES 1841 NON-REVERSIBLE (Forward Rotation Shown) SERIES 1841 REVERSIBLE 181P, 181Q, 181U, 1 13 16 275 8 5 16 211 181W, 1841P, 1841Q, 1841U, 1841W EQUIPMENT OPTIONS Furnished with Cataloged Models Extra Options 2 Hole Face Mounting R181-A123 Exhaust Deflector Assembly with 3 4" Pipe Tap *To order Motor with Square Drive Shaft, add the suffix 2 to the Model Number. Example: 1841Q2. * 1 2" Square Drive Shaft on Gear Ratios: P, Q, U Shaft Extension 1.19" (3.23mm) * 5 8" Square Drive Shaft on Gear Ratios: W Shaft Extension 1.19" (3.23mm) 31

Series 38 and 384 Multi-Vane Air Motors SPECIFICATIONS Air Speed at Consumption Model Max. Power Max. Power Free Speed Starting Torque Stall Torque at Max. Power Weight hp kw rpm rpm Ib.-ft. Nm Ib.-ft. Nm scfm m 3 /m lb. kg Non-Reversible Direction of rotation is counterclockwise when facing the shaft. 38M 1.55 1.16 52 11 24 32.5 33 44.8 48 1.36 7 1 8 3.23 38P 1.45 1.8 285 6 42 57 56.5 76.6 48 1.36 8 1 2 3.86 38Q 1.45 1.8 18 375 62 84 83.5 113 48 1.36 8 1 2 3.86 38R 1.45 1.8 15 32 72 98 96 13 48 1.36 8 1 2 3.86 38S 1.45 1.8 12 255 88 119 118 16 48 1.36 8 1 2 3.86 38U 1.45 1.8 15 22 15 142 14 189 48 1.36 8 1 2 3.86 Reversible 384M 1.4 1.4 39 825 23 31.2 31.5 42.7 44 1.25 7 3 8 3.35 384P 1.35 1.1 215 44 4 54.2 53.5 72.6 44 1.25 8 3 4 3.97 384Q 1.35 1.1 13 28 6 81.4 8 16 44 1.25 8 3 4 3.97 384R 1.35 1.1 122 238 69 93 92 125 44 1.25 8 3 4 3.97 384S 1.35 1.1 1 19 86 116 115 156 44 1.25 8 3 4 3.97 384U 1.35 1.1 83 162 1 135 134 181 44 1.25 8 3 4 3.97 ALL models must be operated with sufficient load to prevent speed from exceeding maximum allowable speed shown on performance curve. Performance figures are at 9 psig (62 kpa) air pressure. 155.7 13.8 132 88 111 74 SHAFT RADIAL (LBS.) 93 62 63 42 36.6 24.4 12 8 4 SPEED 9 PSIG 7 PSIG 29 418 627 SPEED FOR DETERMINING SHAFT RADIAL 1.65 9 PSIG 7 PSIG 9 PSIG 63 42 21 1.1.55 POWER () (SCFM) 146.1 97.4 125.4 83.6 14.1 69.4 SHAFT RADIAL (LBS.) 51.9 44 37 31 21 12.2 87.3 58.2 58.5 39 34.5 23 12 8 4 SPEED 153 36 459 SPEED FOR DETERMINING SHAFT RADIAL 1.5 9 PSIG 6 4 2 1..5 POWER () (SCFM) 7 PSIG 48.7 41.8 34.7 29.1 19.5 11.5 7 PSIG 9 PSIG 7 PSIG 9 PSIG 7 PSIG 38M 38P 38Q 38R 38S 38U 382 764 29 13 19 418 26 218 1146 627 39 327 89 178 267 77 154 231 384M 384P 384Q 384R 384S 384U 287 574 153 97 81 36 194 162 861 459 291 243 66 132 198 56 112 168 32

Series 38 and 384 Multi-Vane Air Motors SERIES 38 AND 384 DIMENSIONS 5/16-18 UNC-2B 6 HOLES 7/16" (11.mm) DEEP 1-1/8" R (28.575mm) KEY 3/16" SQ. x 1-1/2" (4.76mm SQ. x 38.mm) 2-3/16" (56.mm) 1-25/32" (45.mm) C A B 3-1/4" (83.mm) DIA 1-5/8" (41.mm) DIA 1-11/16" (43.mm) OPTIONAL 3/4" NPT PIPED-AWAY EXHAUST (36 ROTATABLE) 7/8" (22.mm) 2-3/8" (6.mm) 3-5/8" (92.mm) DIA 2-3/4" (7.mm) DIA 1/2" NPT INLET 6 6 7/8" (22.mm) 1.75" +.1" (44.45mm +.254mm) SHAFT RADIAL 1/8" + 1/64" (3.17mm +.4mm) 2-11/16" (68.mm) DIA 1/2" NPT INLET REVERSE INLET 1/2" NPT INLETS FORWARD INLET.75".5" (19.5mm.127mm) DIA 1/2" (13.mm) 21/32" (17.mm) 21/32" (17.mm) SERIES 38 NON-REVERSIBLE SERIES 384 REVERSIBLE DIMENSIONS S A B C in. mm in. mm in. mm 38M, 384M 1 1 16 256 7 178 1 1 16 27 38P, 38Q, 38R, 11 3 4 299 8 11 16 221 2 3 16 56 38S, 38U 384P, 384Q, 384R, 384S, 384U EQUIPMENT OPTIONS Furnished with Cataloged Models Extra Options 6 Hole Face Mounting R38-A123 Exhaust Deflector Assembly with 3 4" Pipe Tap * 5 8" Square Drive Shaft Shaft Extension 1.25" (31.75mm) *To order Motor with Square Drive Shaft, add the suffix 2 to the Model Number. Example: 384Q2. 33

44-Series Power Motors SPECIFICATIONS NON-REVERSIBLE - 2. H.P. REVERSIBLE - 1.9 H.P. *Requires installation for reversible motors - shown on page 85. 2 1. 6 126. 72. 42. 18. 1.2 2.64 84. 48. 28. 12. 6.8 1.76 1. 2. 8 POWER () 42. 24. 14. 6. 3.4.88. 4 SPEED ( RPM ) M o d e l 8211-A/825-A 4, 5 9, 13, 5 821-A/824-A 1, 1 2 5 2, 2 5 3,375 829-A 639 1, 2 7 8 1, 9 1 7 828-A/822-A 28 8 5 7 6 86 4 827-A/821-A 1 6 32 48 826-A/82-A 8 8 1 7 6 2 6 4 STANDARD EQUIPMENT OPTIONS FOR SPECIFIED S EQUIPMENT OPTIONS 37892-1 FOOT BRACKET See page 168. 34 See page 168.

Dimensions 44-Series Power Motors & Mounts 44-SERIES AND MOUNTING ACCESSORY DIMENSIONS 35

Series 48 and 484 Multi-Vane Air Motors SPECIFICATIONS Air Speed at Consumption Model Max. Power Max. Power Free Speed Starting Torque Stall Torque at Max. Power Weight hp kw rpm rpm Ib.-ft. Nm Ib.-ft. Nm scfm m 3 /m lb. kg Non-Reversible Direction of rotation is counterclockwise when facing the shaft. 48D 3.8 2.83 525 985 5.8 7.8 7.7 1.4 98 2.77 15 1 4 6.92 48K 3.7 2.76 821 1538 35.3 47.8 47 63.7 95 2.69 15 1 4 6.92 48M 3.7 2.76 56 15 51 69.2 69 93.6 95 2.69 15 1 4 6.92 48N 3.7 2.76 387 726 75 12 1 136 95 2.69 15 1 4 6.92 48P 3.5 2.61 26 51 98 133 131 178 95 2.69 19 3 4 8.96 48Q 3.5 2.61 194 375 129 175 173 235 95 2.69 19 3 4 8.96 48S 3.5 2.61 146 275 178 241 238 323 95 2.69 19 3 4 8.96 48U 3.5 2.61 97 185 265 359 354 48 95 2.69 19 3 4 8.96 Reversible 484D 3.3 2.46 455 91 5.2 7. 6.9 9.4 95 2.69 15 1 4 6.92 484K 3.2 2.39 711 1429 32 43.4 42.7 57.9 95 2.69 15 1 4 6.92 484M 3.2 2.39 485 975 47.3 64. 63. 85.4 95 2.69 15 1 4 6.92 484N 3.2 2.39 336 675 67.7 91.7 9.2 122 95 2.69 15 1 4 6.92 484P 3 2.24 228 475 93 126 125 17 95 2.69 2 1 8 9.13 484Q 3 2.24 167 35 123 167 165 224 95 2.69 2 1 8 9.13 484S 3 2.24 125 255 161 218 215 292 95 2.69 2 1 8 9.13 484U 3 2.24 83 17 225 35 3 47 95 2.69 2 1 8 9.13 ALL models must be operated with sufficient load to prevent speed from exceeding maximum allowable speed shown on performance curve. Performance figures are at 9 psig (62 kpa) air pressure. SPEED 24 SPEED 24 CURVE B 127.1 254.2 381.3 85.4 17.8 256.2 186.3 124.2 62.1 141 94 47 CURVE A 15 7 35 SHAFT RADIAL (LBS.) 74.4 49.6 24.8 51 34 17 8.1 5.4 2.7 18 12 6 365 73 195 9 PSIG 7 PSIG B 144 SPEED FOR DETERMINING SHAFT RADIAL 3.9 9 PSIG 7 PSIG 9 PSIG 7 PSIG A 96 48 2.6 1.3 POWER () (SCFM) CURVE B 17 214 321 76.5 153 229.5 176.1 117.4 58.7 133.5 89 44.5 CURVE A 94.5 63 31.5 SHAFT RADIAL (LBS.) 69.3 46.2 23.1 47.4 31.6 15.8 7.5 5. 2.5 18 12 6 339 678 117 9 PSIG 7 PSIG 144 SPEED FOR DETERMINING SHAFT RADIAL 3.3 9 PSIG 7 PSIG 9 PSIG 7 PSIG B A 96 48 2.2 1.1 POWER () (SCFM) 48D 48K 48M 48N 48P 48Q 3325 665 535 365 25 17 73 5 9975 165 195 75 177 354 531 13 26 39 48S 96 192 288 48U 64 128 192 484D 484K 484M 484N 484P 484Q 389 6178 497 339 233 994 678 466 9267 1491 117 699 165 33 495 122 244 366 484S 89 178 267 484U 59 118 177 36

Series 48 and 484 Multi-Vane Air Motors SERIES 48 AND 484 DIMENSIONS 5/16-18 UNC-2B 6 HOLES 7/16" (11.mm) DEEP KEY 1/4" SQ. x 1-5/8" (6.35mm SQ. x 41.mm) 1-1/2" R (38.1mm) 2-1/4" (57.mm) C 1/8" + 1/64" (3.17mm +.4mm) A B TOP DETAIL SHOWN BELOW OPTIONAL 1" NPT PIPED-AWAY EXHAUST (36 ROTATABLE) 1/8" (3.mm) 1-15/16" (49.mm) 7/8" (22.mm) 2-7/8" (73.mm) 3.5".15" (88.9mm.381mm) DIA 4-3/8" (111mm) DIA 4." (12mm) DIA 6 6 1." DIA.3" (25.4mm.76mm) 1." (25.mm) SHAFT RADIAL 2.5" +.1" (63.5mm +.254mm) DIA 1/2" NPT INLETS 1/2" NPT INLET 3/4" (19.mm) REVERSE INLET FORWARD INLET 1-3/4" (44.5mm) 1/2" NPT REVERSE INLET 1-1/2" (38.mm) 1/2" NPT FORWARD INLET OPTIONAL SIDE INLET BACK HEAD (MOTOR CAN BE ROTATED 12 EITHER DIRECTION TO RELOCATE INLET PORTS) SERIES 48 NON-REVERSIBLE 11/16" (18.mm) SERIES 484 REVERSIBLE 11/16" (18.mm) DIMENSIONS S A B C in. mm in. mm in. mm UP 48D, 48K, 48M, 48N 12 1 8 38 9 229 29 32 23 484D, 484K, 484M, 484N ASSEMBLE TO APPLICATION IN "UP" ORIENTATION FOR BEST STARTING CAPABILITY 48P, 48Q, 48S, 48U 14 1 2 368 11 3 8 289 2 7 8 73 484P, 484Q, 484S, 484U TOP DETAIL EQUIPMENT OPTIONS Furnished with Cataloged Models Extra Options 6 Hole Face Mounting R48-A123 Exhaust Deflector Assembly with 1" Pipe Tap ** R491-12 Side Inlet Backhead Requires (3) 518-14 Screws *To order Motor with Square Drive Shaft, add the suffix 2 to the Model Number. Example: 484Q2. **Contact I-R for Model Number with these options. * 5 8" Square Drive Shaft on Gear Ratio: M Shaft Extension 1.38" (35.5mm) * 3 4" Square Drive Shaft on Gear Ratios: P, Q, S, U Shaft Extension 1.47" (37.44mm) 37

Series 17RA, 17RB, 34RA and 34RB Multi-Vane Air Motors SPECIFICATIONS Air Speed at Consumption Model Max. Power Max. Power Free Speed Starting Torque Stall Torque at Max. Power Weight hp kw rpm rpm Ib.-ft. Nm Ib.-ft. Nm scfm m 3 /m lb. kg Reversible 17RA5 2.3 1.72 562 111 24 32.5 37 5.2 13 2.92 4 18.1 17RA8 2.3 1.72 383 76 35 47.5 54.5 73.9 13 2.92 4 18.1 17RA11 2.3 1.72 254 55 53 71.9 82 111 13 2.92 4 18.1 17RA14 2.3 1.72 21 4 67 91 14 141 13 2.92 4 18.1 17RA17 2.3 1.72 169 335 8 19 124 168 13 2.92 4 18.1 17RA22 2.3 1.72 129 255 15 142 163 221 13 2.92 4 18.1 17RB29 2.2 1.64 97 187 12 163 21 273 1 2.83 43 19.5 17RB36 2.2 1.64 79 152 148 21 248 336 1 2.83 43 19.5 17RB45 2.2 1.64 62 121 187 254 312 423 1 2.83 43 19.5 17RB78 2.2 1.64 36 69 327 443 545 739 1 2.83 43 19.5 34RA5 4.1 3.6 56 18 41 6 69 93.6 183 5.18 72 32.7 34RA8 4.1 3.6 385 74 65 88 11 137 183 5.18 72 32.7 34RA11 4.1 3.6 255 49 98 133 152 26 183 5.18 72 32.7 34RA14 4.1 3.6 21 39 124 168 192 26 183 5.18 72 32.7 34RA17 4.1 3.6 168 325 148 21 229 311 183 5.18 72 32.7 34RA22 4.1 3.6 128 245 195 264 31 48 183 5.18 72 32.7 34RB29 4 2.98 99 187 224 34 374 57 18 5.1 75 34 34RB36 4 2.98 8 152 277 376 462 627 18 5.1 75 34 34RB45 4 2.98 63 121 348 472 581 788 18 5.1 75 34 34RB78 4 2.98 36 69 66 822 11 137 18 5.1 75 34 ALL models must be operated with sufficient load to prevent speed from exceeding maximum allowable speed shown on performance curve. Performance figures are at 9 psig (62 kpa) air pressure. SPEED SPEED 6 4 345 23 CURVE B 273 182 222 148 18 12 138 92 117 78 CURVE A SHAFT RADIAL (LBS.) 9.3 6 4 2 385 77 1155 SPEED FOR DETERMINING SHAFT RADIAL 2.4 156 14 52 1.6.8 POWER () (SCFM) 6 46 39 3.1 2 13.6 6.2 6 4 4.8 27.2 9 PSIG 7 PSIG 9 PSIG 7 PSIG B A 1113 742 642 428 CURVE B 51 34 414 276 333 222 252 2 115 91 74 168 213 142 CURVE A SHAFT RADIAL (LBS.) 168 112 114 76 75.9 5.6 6 4 2 375 75 1125 SPEED FOR DETERMINING SHAFT RADIAL 4.5 9 PSIG 9 PSIG 7 PSIG 7 PSIG 3 2 1 3. 1.5 POWER () (SCFM) 9 PSIG 7 PSIG 111 84 71 56 38 25.3 B A 371 214 17 138 9 PSIG 7 PSIG 17RA5 17RA8 17RA11 17RA14 17RA17 17RA22 17RB29 17RB36 17RB45 17RB78 385 77 264 176 139 528 352 278 1155 792 528 417 117 234 351 89 178 267 65 53 13 16 195 159 42 84 126 24 48 72 34RA5 34RA8 34RA11 34RA14 34RA17 34RA22 34RB29 34RB36 34RB45 34RB78 375 75 257 17 135 514 34 27 1125 771 51 45 113 226 339 89 17 255 65 53 13 16 195 159 42 84 126 24 48 72 38

Series 17RA, 17RB, 34RA and 34RB Multi-Vane Air Motors SERIES 17RA, 17RB, 34RA, 34RB DIMENSIONS REVERSE INLET E D FORWARD INLET B C A 9/16" (14.mm) 7-19/32" (196.mm) 9/16" (14.mm) 1/8" (3.mm) 3/8" SQ. x 2." LONG KEY (1.mm SQ. x 51.mm) 2-11/16" (68.mm) 4.5".2" (114.3mm.51mm) DIA 2-1/2" (64.mm) 1.5".5" (38.1mm.13mm) DIA MOTOR CAN BE ROTATED IN INCREMENTS OF 9 TO CHANGE LOCATION OF INLET PORTS 5.732" (146.mm) 3-1/16" (78.mm) DIMENSIONS SERIES 17RB AND 34RB 2-1/2" (64.mm) 6-1/8" (156.mm) 9-11/32" (237.mm) SERIES A B C D E in. mm in. mm in. mm NPT in. mm 17RB 13 1 16 332 4 29 32 125 2 3 16 56 3 8" 7 8 22 34RB 14 13 16 376 6 21 32 169 2 9 32 58 1 2" 1 3 16 3 SHAFT RADIAL 1." (25.4mm) 9/16" (14.mm) 4-7/32" (17.mm) 1/4" SQ. x 1-5/8" LONG KEY (6.mm SQ. x 41.mm) 3/8-16 TAP 12 HOLES 5/8" (16.mm) DEEP ON 5.875" (149.mm) DIA 3-13/16" (97.mm) 5-13/16" (148.mm) 1/8" (3.mm) 4.5".2" (114.3mm.51mm) DIA 45 3 3 45 1.".5" (25.4mm.13mm) DIA 1-1/2" (267.mm) 2-1/16" (52.mm) 4." (12.mm) 7/8" (22.mm) 2-1/4" (57.mm) 2-1/2" (64.mm) 5-3/8" (137.mm) 2-5/32" (55.mm) 13/16" (2.7mm) 11/16" 4 HOLES (18.mm) DIA 8." (23.mm) 4." (12.mm) 3/4" (19.mm) SERIES 17RA AND 34RA (MOTOR DIMENSIONS ARE SAME AS 17RB AND 34RB) SHAFT RADIAL FRONT END VIEW ALL SERIES 39

Series 48RA and 48RB Multi-Vane Air Motors SPECIFICATIONS Air Speed at Consumption Model Max. Power Max. Power Free Speed Starting Torque Stall Torque at Max. Power Weight hp kw rpm rpm Ib.-ft. Nm Ib.-ft. Nm scfm m 3 /m lb. kg Reversible 48RA5 3.1 2.31 93 169 26 35.3 35 47.5 95 2.69 44 2 48RA8 3.1 2.31 638 116 38 51.5 51.5 69.8 95 2.69 44 2 48RA11 3.1 2.31 423 772 57 77.3 77.5 15 95 2.69 44 2 48RA14 3.1 2.31 332 612 72 97.6 98 133 95 2.69 44 2 48RA17 3.1 2.31 278 511 86 117 117 159 95 2.69 44 2 48RA22 3.1 2.31 213 39 113 153 154 29 95 2.69 44 2 48RB29 3 2.24 162 292 135 183 189 256 9 2.55 75 34 48RB36 3 2.24 131 236 167 227 234 317 9 2.55 75 34 48RB45 3 2.24 15 188 29 283 295 4 9 2.55 75 34 48RB78 3 2.24 6 18 364 494 513 696 9 2.55 75 34 ALL models must be operated with sufficient load to prevent speed from exceeding maximum allowable speed shown on performance curve. Performance figures are at 9 psig (62 kpa) air pressure. 567 378 327 218 CURVE B 258 172 21 14 171 114 129 86 CURVE A SHAFT RADIAL (LBS.) 6 4 2 SPEED 43 86 129 SPEED FOR DETERMINING SHAFT RADIAL 3.36 15 1 5 2.24 1.12 POWER () (SCFM) 57 43 36 28.5 18.9 12.9 18 72 85.5 57 56.7 37.8 38.7 25.8 9 PSIG 9 PSIG 7 PSIG 7 PSIG B A EQUIPMENT OPTIONS Furnished with Cataloged Models Side Inlet Backhead Standard Options R484-12 Rear Inlet Backhead 189 19 86 7 9 PSIG 7 PSIG 48RA5 48RA8 48RA11 48RA14 48RA17 48RA22 48RB29 48RB36 48RB45 48RB78 586 1172 43 268 213 86 536 426 1758 129 84 639 178 356 534 136 272 48 12 82 24 164 36 246 66 132 198 38 76 114 4

Series 48RA and 48RB Multi-Vane Air Motors SERIES 48RA AND 48RB DIMENSIONS 15-7/8" (43.mm) 1-3/4" (44.5mm) 1/2" NPT REVERSE INLET 1-1/2" (38.mm) 1." (25.44mm) 1/2" NPT FORWARD INLET REAR INLET BACK HEAD 7-23/32" (196.mm) 4-3/8" 111.mm) DIA 4." (12.mm) DIA 2-7/8" (73.mm) 9/16" (14.mm) 7-19/32" (193.mm) 9/16" (14.mm) KEY 3/8" SQ. x 2." LONG (1.mm SQ. x 51.mm) 1/8" (3.mm) 4.5" DIA.2" (114.3mm.51mm) SIDE INLET BACK HEAD (MOTOR CAN BE ROTATED 12 EITHER DIRECTION TO RELOCATE INLET PORTS) 3/4" (19.mm) 2-3/16" (55.5mm) 2." (51.mm) DIA 5.732" (146.mm) 3-1/16" (78.mm) 1.5" DIA.5" (38.1mm.13mm) 1." (25.4mm) 1/2" NPT REVERSE INLET 1-1/2" (38.mm) OPTIONAL REAR INLET BACK HEAD 1/2" NPT FORWARD INLET OPTIONAL 1." NPT PIPED-AWAY EXHAUST (36 ROTATABLE) 2-1/2" (64.mm) 6-1/8" (156.mm) 9-11/32" (237.mm) SERIES 48RB SHAFT RADIAL 9/16" (14.mm) 4-7/32" (17.mm) 3/8-16 TAP 12 HOLES 5/8" (16.mm) DEEP ON 5.875" (149.mm) DIA 3-13/16" (97.mm) 5-13/16" (148.mm) KEY 1/4" SQ. x 1-5/8" LONG (6.mm SQ. x 41.mm) 1/8" (3.mm) 4.5".2" (114.3mm.51mm) DIA 45 3 3 45 1.".5" (25.4mm.13mm) DIA 1-1/2" (267.mm) 2-1/16" (52.mm) 4." (12.mm) 7/8" (22.mm) 2-1/4" (57.mm) 2-1/2" (64.mm) 5-3/8" (137.mm) 2-5/32" (55.mm) SERIES 48RA (MOTOR DIMENSIONS ARE SAME AS 48RB) SHAFT RADIAL 13/16" (2.7mm) 11/16" 4 HOLES (18.mm) DIA 8." (23.mm) FRONT END VIEW ALL SERIES 4." (12.mm) 3/4" (19.mm) 41

7 PSIG Series 92RA and 92RB Multi-Vane Air Motors SPECIFICATIONS Air Speed at Consumption Model Max. Power Max. Power Free Speed Starting Torque Stall Torque at Max. Power Weight hp kw rpm rpm Ib.-ft. Nm Ib.-ft. Nm scfm m 3 /m lb. kg Reversible 92RA5 8.15 6.8 91 139 56 75.9 75 12 23 6.51 46 2.9 92RA8 8.15 6.8 62 1296 8 19 19 148 23 6.51 46 2.9 92RA11 8.15 6.8 415 852 12 163 164.5 223 23 6.51 46 2.9 92RA14 8.15 6.8 327 682 152 26 28 282 23 6.51 46 2.9 92RA17 8.15 6.8 274 571 18 244 248 336 23 6.51 46 2.9 92RA22 8.15 6.8 29 435 235 319 326 442 23 6.51 46 2.9 92RB29 7.9 5.89 16 327 28 38 42 545 225 6.37 78 35.4 92RB36 7.9 5.89 13 264 345 468 497 674 225 6.37 78 35.4 92RB45 7.9 5.89 13 21 44 597 626 849 225 6.37 78 35.4 92RB78 7.9 5.89 59 12 77 144 19 1478 225 6.37 78 35.4 ALL models must be operated with sufficient load to prevent speed from exceeding maximum allowable speed shown on performance curve. Performance figures are at 9 psig (62 kpa) air pressure. MAXIMUM ALLOWABLE SPEED 1191 794 69 46 CURVE B 543 362 441 294 36 CURVE A SHAFT RADIAL (LBS.) 6 4 2 3 6 9 39 26 13 SPEED FOR DETERMINING SHAFT RADIAL 8.7 5.8 2.9 POWER () (SCFM) 12 9 76 6 4 27 24 27 18 228 152 18 12 12 8 81 54 9 PSIG 9 PSIG 7 PSIG B A 7 PSIG 397 23 181 147 9 PSIG 92RA5 92RA8 92RA11 92RA14 92RA17 92RA22 92RB29 92RB36 92RB45 92RB78 656 1312 45 3 237 9 6 474 1968 135 9 711 198 396 594 151 32 453 114 92 228 184 342 276 73 146 219 42 84 126 42

Series 92RA and 92RB Multi-Vane Air Motors SERIES 92RA AND 92RB DIMENSIONS 1." NPT REVERSE INLET 1-1/4" (32.mm) 1." NPT FORWARD INLET 1-1/4" (32.mm) 7-1/16" (179.mm) 3-5/32" (8.mm) 15-7/32" (386.mm) 9/16" (14.mm) 7-19/32" (193.mm) 9/16" (14.mm) KEY 3/8" SQ. x 2." LONG (1.mm SQ. x 51.mm) 1/8" (3.mm) 4.5".2" (114.3mm.51mm) DIA PILOT 3-9/16" (9.mm) 3-1/4" (82.mm) 5.732" (146.mm) 3-1/16" (78.mm) 1-1/4" NPT EXHAUST MOTOR END VIEW 1-1/8" (29.mm) NOTE: INLET AND EXHAUST PORTS CAN BE RELOCATED RELATIVE TO EACH OTHER IN INCREMENTS OF 9 3-1/4" (82.mm) 2-1/2" (64.mm) 9-11/32" (237.mm) SERIES 92RB 6-1/8" (156.mm) 1." (25.4mm) SHAFT RADIAL 1.5".5" (38.1mm.13mm) DIA 9/16" (14.mm) 4-7/32" (17.mm) 3/8-16 TAP 12 HOLES 5/8" (16.mm) DEEP ON 5.875" (149.mm) DIA 3-13/16" (97.mm) 5-13/16" (148.mm) KEY 1/4" SQ. x 1-5/8" LONG (6.mm SQ. x 41.mm) 1/8" (3.mm) 4.5".2" (114.3mm.51mm) DIA 45 3 3 45 1.".5" (25.4mm.13mm) DIA 1-1/2" (267.mm) 2-1/16" (52.mm) 4." (12.mm) 7/8" (22.mm) 2-1/4" (57.mm) 2-1/2" (64.mm) 5-3/8" (137.mm) 2-5/32" (55.mm) 13/16" (2.7mm) 11/16" 4 HOLES (18.mm) DIA 8." (23.mm) 4." (12.mm) 3/4" (19.mm) SERIES 92RA (MOTOR DIMENSIONS ARE SAME AS 92RB) SHAFT RADIAL FRONT END VIEW ALL SERIES 43

Series 92RM and 992RM Multi-Vane Air Motors SPECIFICATIONS Air Speed at Consumption Model Max. Power Max. Power Free Speed Starting Torque Stall Torque at Max. Power Weight hp kw rpm rpm Ib.-ft. Nm Ib.-ft. Nm scfm m 3 /m lb. kg Non-Reversible 92RM1 9.9 7.38 295 398 33 44.7 45 61 24 6.79 24 1 4 11 92RM2 9.9 7.38 295 398 33 44.7 45 61 24 6.79 24 1 4 11 Reversible 992RM1 8.15 6.8 173 36 28.7 38.9 39 52.9 23 6.51 25 1 4 11.3 ALL models must be operated with sufficient load to prevent speed from exceeding maximum allowable speed shown on performance curve. Performance figures are at 9 psig (62 kpa) air pressure. Direction of rotation of Model 92RM1 is clockwise, and of Model 92RM2 is counter clockwise when facing the shaft end of the motor. SHAFT RADIAL (LBS.) 48.6 32.4 16.2 48.6 32.4 16.2 6 4 2 MAXIMUM ALLOWABLE SPEED 9 PSIG 7 PSIG 1396 2792 4188 SPEED FOR DETERMINING SHAFT RADIAL 9 PSIG 7 PSIG 7 PSIG 9 PSIG 399 266 133 1.8 7.2 3.6 POWER () (SCFM) SHAFT RADIAL (LBS.) 6 4 2 13.9 27.8 41.7 MAXIMUM ALLOWABLE SPEED 9 PSIG 7 PSIG 39 26 13 1248 2496 3744 SPEED FOR DETERMINING SHAFT RADIAL 8.7 9 PSIG 7 PSIG 7 PSIG 9 PSIG 5.8 2.9 POWER () (SCFM) 92RM1 92RM2 1396 2792 4188 1396 2792 4188 992RM1 1248 2496 3744 44

Series 92RM and 992RM Multi-Vane Air Motors SERIES 92RM AND 992RM DIMENSIONS 1." NPT AIR INLET NOTE: INLET AND EXHAUST PORTS CAN BE RELOCATED RELATIVE TO EACH OTHER IN INCREMENTS OF 9 9-5/16" (237.mm) REVERSIBLE 9-3/16" (233.mm) NON-REVERSIBLE 3-5/32" (8.mm) 2-15/32" (63.mm) KEY 1/4" SQ. x 1-5/8" (6.35mm SQ. x 41.28mm) 2-1/4" (57.mm) DIA 2-1/4" (57.mm) 3-9/16" (91.mm) 1/8" (3.mm) 2-5/16" (59.mm).875" -.5" (22.23mm -.13mm) DIA 13/16" (21.mm) 1." NPT AIR INLET FOR COUNTER- CLOCKWISE SHAFT ROTATION 1-1/4" (32.mm) 1." NPT AIR INLET FOR CLOCKWISE SHAFT ROTATION 8-11/16" (221.mm) 3-1/4" (83.mm) 1-63/64" (5.mm) 3-1/4" (83.mm) 1-1/4" NPT EXHAUST 2-9/32" (58.mm) 4-15/16" (125.mm) 1/4" (6.mm) SHAFT RADIAL 7/8" (22.mm) 6-7/8" (175.mm) DIA 5-1/4" (133.mm) DIA 1/4-2 UNC-3B 18 HOLES 3/8" (1.mm) DEEP 2 4.718" ±.5" (119.84mm ±.127mm) DIA 4.374".1" (111.1mm.25mm) DIA 45

Series MVA and MV Multi-Vane Air Motors SPECIFICATIONS Air Speed at Consumption Model* Max. Power Max. Power Free Speed Starting Torque Stall Torque at Max. Power Weight hp kw rpm rpm Ib.-ft. Nm Ib.-ft. Nm scfm m 3 /m lb. kg Reversible MVA17A 1.93 1.44 28 545 4.5 6.1 7 9.5 76 2.15 12 1 2 5.67 MVA17B 1.93 1.44 28 545 4.5 6.1 7 9.5 76 2.15 12 1 2 5.67 MVA34A 4.15 3.9 3 625 8.3 11.3 12.8 17.4 181 5.12 16 1 2 7.48 MVA34B 4.15 3.9 3 625 8.3 11.3 12.8 17.4 181 5.12 16 1 2 7.48 MOV5AA.75.56 33 68 1.65 2.2 2.2 2.98 3.84 6 1 2 2.95 MOV75AA 1.5 7.8 26 56 22.5 3.5 3 4.7 26 7.36 64 29 ALL models must be operated with sufficient load to prevent speed from exceeding maximum allowable speed shown on performance curve. Performance figures are at 9 psig (62 kpa) air pressure. A suffix denotes foot mount model, B suffix denotes flange mount models. * SHAFT RADIAL (LBS.) 7.8 2.6 5.2 24 16 8 SPEED 9 PSIG 7 PSIG 1893 3786 5679 SPEED FOR DETERMINING SHAFT RADIAL 9 PSIG 7 PSIG 9 PSIG 7 PSIG 117 78 39 2.1 1.4.7 POWER () (SCFM) SHAFT RADIAL (LBS.) 4.48 8.96 13.44 24 16 8 SPEED 9 PSIG 217 434 651 SPEED FOR DETERMINING SHAFT RADIAL 9 PSIG 7 PSIG 9 PSIG 7 PSIG 7 PSIG 315 21 15 4.35 2.9 1.45 POWER () (SCFM) MVA17 1893 3786 5679 MVA34 217 434 651 46

Series MVA and MV Multi-Vane Air Motors SHAFT RADIAL (LBS.).79 1.58 2.37 15 1 5 SPEED 9 PSIG 7 PSIG 2361 4722 783 SPEED FOR DETERMINING SHAFT RADIAL.81 9 PSIG 7 PSIG 9 PSIG 7 PSIG 51 34 17.54.27 POWER () (SCFM) SHAFT RADIAL (LBS.) 1.8 21.6 32.4 45 3 15 1945 389 5835 MAXIMUM ALLOWABLE SPEED 9 PSIG 7 PSIG 315 21 15 SPEED FOR DETERMINING SHAFT RADIAL 11.25 9 PSIG 7 PSIG 9 PSIG 7 PSIG 7.5 3.75 POWER () (SCFM) MOV5 2361 4722 783 MOV75 1945 389 5835 SERIES MVA DIMENSIONS C E (2 INLETS) A D 1/8" (3.mm) 2-1/16" (52.mm) 5/8" (16.mm) 5-7/8" (149.mm) DIA KEY 3/16" SQ. x 1-1/4" (4.76mm SQ. x 31.75mm) 45 TYP. FORWARD INLET B B REVERSE INLET 3/8-16 UNC-2B 4 HOLES-THRU 4.5" 4.498" (114.3mm) (114.25mm) DIA F SHAFT RADIAL 3-1/2" (89.mm) 2." (51.mm) DIMENSIONS 2." (51.mm) OPTIONAL MOUNTING BASE USED ON A S ONLY 1." (25.mm) 11/32" x 1-3/32" SLOTS (9.mm x 28.mm) 4 PLACES 1-11/16" (43.mm) 2-1/2" (64.mm) 1-11/16" (43.mm) 5." (127.mm) SERIES A B C D E F DIA. in. mm in. mm NPT in. mm in. mm in. mm MVA17 6 11 16 17 7 8 22 3 8" 1 7 8 48 2 1 2 64.625 15.88.6245 15.86 MVA34 8 7 16 214 1 3 16 3 1 2" 2 51 2 5 8 67.875 22.23.8745 22.21 1/4" (6.mm) 47

Series MVA and MV Multi-Vane Air Motors MOV5AA DIMENSIONS 3/8" (9.5mm) 4-11/16" (119.mm) DIA 1-11/32" (34.mm) 2-27/32" (72.mm) 1-29/32" (48.mm) 5/8" (16.mm) 2.999".1" (76.175mm.25mm) DIA FORWARD INLET 3/4" (19.mm) 1/4" NPT INLET REVERSE INLET 3/4" (19.mm) 1/4" NPT INLET 3/8-16 UNC-2B 4 HOLES-17/32" (13.5mm) DEEP 45 45 KEY 3/16" SQ. x 1-1/4" (4.76mm SQ. x 32.mm) 5-7/8" (149.mm) 45 45 4.5".2" (114.3mm.51mm) DIA 3.875" (98.4mm) DIA 3-1/8" (79.mm) 7/8" (REF) (22.mm) 1-3/8" (35.mm) 1/8" (3.mm) SHAFT RADIAL 3-3/4" (95.mm) 9/32" (7.mm) 3/8-16 UNC-2B 4 HOLES-THRU 6-1/2" (165.mm) DIA MOTOR SHOWN WITH MV1AB-58 ADAPTER (NEMA 56C MOUNTING) 1-1/2" (38.mm) 9/32" 4 HOLES (7.mm) DIA.625".1" (15.875mm.25mm) DIA 3/4" (19.mm) 1-1/2" (38.mm) 48

Series MVA and MV Multi-Vane Air Motors MOV75AA DIMENSIONS KEY 5/16" SQ. x 2-3/4" (7.94mm SQ. x 7.mm) 3 2-7/8" (73.mm) 6-1/2" (165mm) 1." (254.mm).375" (9.5mm) 39/64" (16.mm) 1-3/8" (35.mm) 5." (127.mm) 1-1/4" (32.mm) 1-1/4" NPT INLET FORWARD INLET REVERSE INLET 1-1/4" (32.mm) 1-1/4" NPT INLET 6 5/32" (4.mm) 3-1/2" (89.mm) 3.875" (98.43mm) DIA 8." (23.mm) DIA 9-7/8" (251.mm) 3.998".2" (11.55mm.51mm) DIA 5-1/4" (133.mm) DIA 3/8-16 UNC-2B 6 HOLES 1/2" (13.mm) DEEP 5-7/8" (149.mm) 1-1/4" (32.mm) SHAFT RADIAL 1-1/4" NPT EXHAUST 1.375".1" (34.93mm.25mm) DIA 7-3/4" (197.mm) 6-1/2" (165.mm) 2-3/8" (6.mm) 1/2" (13.mm) 4." (12.mm) 5-1/4" (133.mm) 7/16" HOLES (11.mm) DIA EQUIPMENT OPTIONS Models MVA17A MVA17B MVA34A MVA34B MOV5AA Furnished with Cataloged Models *Foot Mounting NEMA C Face 56C Frame Size **Foot Mounting NEMA C Face 182C Frame Size Foot/4 Hole Face Mounting Standard Options MVA8-K4 Mounting Foot Kit MOV1AA-674 Muffler MVA8-K4 Mounting Foot Kit MOV1AA-674 Muffler MRV15-AC 98 Muffler MOV75AA Foot/6 Hole Face Mounting 15BM-A674 Muffler * Removal of Foot Mounting results in Motor having NEMA C Face Mounting, 56C Frame Size. ** Removal of Foot Mounting results in Motor having NEMA C Face Mounting, 182C Frame Size. 49

Series Select Multi-Vane Air Motors SPECIFICATIONS Max Power DESIGNATION BREAKOUT SM Speed at Free Starting Stall Air Consumption Max Power Speed Torque Torque at Max. Power Series hp kw rpm rpm lb.-ft. Nm lb.-ft. Nm scfm m^3/m lb. kg reversible SM1AMA.33.25 76 15,2.29.39.38.52 17.5 1.5.7 SM1AMAL.33.25 76 15,2.29.39.38.52 17.5 1.5.7 SM1UPC.6.37 6 12,5.45.6.6.81 42 1.2 1.75.8 SM1UPCL.6.37 6 12,5.45.6.6.81 42 1.2 1.75.8 SM1UPCR.6.37 6 12,5.45.6.6.81 42 1.2 1.75.8 SM2AMAN.88.66 3 8,7 1.7 2.3 2.3 3.1 48 1.4 7.5 3.4 SM2AMC.88.66 3 8,7 1.7 2.3 2.3 3.1 48 1.4 7.5 3.4 SM4AMAN 1.5 1.1 3 79 2.6 3.5 4.1 5.6 67 1.9 8.25 3.7 SM4AMB 1.5 1.1 3 79 2.6 3.5 4.1 5.6 67 1.9 8.25 3.7 SM6AMA 3.6 2.7 3 79 5.3 7.2 8.7 11.8 12 3.4 16.25 7.4 SM6AMAN 3.6 2.7 3 79 5.3 7.2 8.7 11.8 12 3.4 16.25 7.4 SM8AMA 4.8 3.6 25 7 1 13.6 14 19 152 4.3 22.5 1.2 SM8AMAN 4.8 3.6 25 7 1 13.6 14 19 152 4.3 22.5 1.2 Weight Select Series Air Motor Power Series Shaft/Interface Rotation Mounting 1AM A = Round shaft w/ square key L=Left Hand Bias (CCW) N=NEMA mount 1UP (Round shaft on SM1AM series) R=Right Hand Bias (CW) None= Face or Footmount 2AM B = Round shaft with Woodruff Key (#3) None=Reversible (Footmount is an optional 4AM C = Round shaft with flat on the shaft accessory) 6AM 8AM EQUIPMENT OPTIONS Series Furnished with Cataloged Models Optional Accessories SM1AM 3 Hole Face Mounting SM1AM-AG587 Footmount Muffler SM1UP 3 Hole Face Mounting SM1AM-AG587 Footmount Muffler SM2AM 3 Hole Face Mounting SM2AM-AH636 Footmount Muffler NEMA 56C Flange with Model SM2AMAN SM4AM 3 Hole Face Mounting SM4AM-AH634 Footmount Muffler NEMA 56C Flange with Model SM4AMAN SM6AM 3 Hole Face Mounting SM6AM-AH634 Footmount Muffler NEMA 56C Flange with Model SM6AMAN SM8AM 3 Hole Face Mounting Muffler SM8AM-AH64 Footmount NEMA 182C Flange, 184C Flange Mount with Model SM8AMAN 5

INDUSTRIAL MULTI-VANE AIR MOTORS GAST FENNER I-R SELECT Series Max. Power Max. Free Speed Mounting Model Style Rotation Bias Model Style Model Style (w/ Foot Bracket) ( hp) ( rpm) Style 1AM-NCC-12 Left hand (CCW) SM1AMAL.33 15,2 Hub Mount 1AM-NCW-14 Right Hand (CW) SM1AMA.33 15,2 Hub Mount 1AM-NRV-39A Reversible SM1AMA.33 15,2 Hub Mount 1AM-NRV-63A Reversible SM1AMA.33 15,2 Hub Mount 1UP-NCC-1A Left hand (CCW) SM1UPCL.6 12,5 Hub Mount 1UP-NCW-2A Right Hand (CW) SM1UPCR.6 12,5 Hub Mount 1UP-NRV-3A Reversible V1X SM1UPC.6 12,5 Hub Mount 1UP-NRV-1 Reversible SM1UPC.6 12,5 Hub Mount AG585 1AM Foot Mount Bracket (SM1AM-AG587) 2AM-NCC-16 Left hand (CCW) 2VMX/CCW SM2AMC.88 8,7 Hub or Face Mount 2AM-NCC-16F Left hand (CCW) SM2AMC.88 8,7 Hub or Face Mount 2AM-NCW-7A Right Hand (CW) 2VMX/CW SM2AMC.88 8,7 Hub or Face Mount 2AM-NCW-7B Right Hand (CW) SM2AMC.88 8,7 Hub or Face Mount 2AM-NRV-89 Reversible VA2X SM2AMC.88 8,7 Hub or Face Mount 2AM-FCC-1 Left hand (CCW) 2VMJ/CCW SM2AMC (w/ SM2AM-AH636).88 8,7 Foot Mount 2AM-FCW-13 Right Hand (CW) 2VMJ/CW SM2AMC (w/ SM2AM-AH636).88 8,7 Foot Mount 2AM-FRV-51 Reversible VA2J SM2AMC (w/ SM2AM-AH636).88 8,7 Foot Mount 2AM-NCC-43A Left hand (CCW) 2VMC/CCW SM2AMAN.88 8,7 NEMA 56C Mount Right Hand (CW) 2VMC/CW SM2AMAN.88 8,7 NEMA 56C Mount 2AM-NRV-9 Reversible VA2C SM2AMAN.88 8,7 NEMA 56C Mount Left hand (CCW) 4VMX/CCW SM4AMB 1.5 7,9 Hub or Face Mount Right Hand (CW) 4VMX/CW SM4AMB 1.5 7,9 Hub or Face Mount 4AM-NRV-22B Reversible VA4X SM4AMB 1.5 7,9 Hub or Face Mount 4AM-NRV-22F Reversible SM4AMB 1.5 7,9 Hub or Face Mount 4AM-NRV-54A Reversible SM4AMB 1.5 7,9 Hub or Face Mount Left hand (CCW) 4VMJ/CCW SM4AMB (w/ SM4AM-AH634) 1.5 7,9 Foot Mount Right Hand (CW) 4VMJ/CW SM4AMB (w/ SM4AM-AH634) 1.5 7,9 Foot Mount 4AM-FRV-13C Foot Mount VA4J SM4AMB (w/ SM4AM-AH634) 1.5 7,9 Foot Mount 4AM-FRV-13H Foot Mount SM4AMB (w/ SM4AM-AH634) 1.5 7,9 Foot Mount 4AM-FRV-63A Foot Mount SM4AMB (w/ SM4AM-AH634) 1.5 7,9 Foot Mount Left hand (CCW) 4VMC/CCW SM4AMAN 1.5 7,9 NEMA 56C Mount Right Hand (CW) 4VMC/CW SM4AMAN 1.5 7,9 NEMA 56C Mount 4AM-NRV-5C Reversible VA4C SM4AMAN 1.5 7,9 NEMA 56C Mount 4AM-NRV-7C Reversible SM4AMAN 1.5 7,9 NEMA 56C Mount 6AM-NRV-7A Reversible VA6X SM6AMA 3.6 7,9 Face Mount 6AM-FRV-5A Reversible VA6J SM6AMA (w/ SM6AM-AH634) 3.6 7,9 Foot Mount 6AM-FRV-23A Reversible SM6AMA (w/ SM6AM-AH634) 3.6 7,9 Foot Mount 6AM-NRV-11A Reversible VA6C SM6AMAN 3.6 7,9 NEMA 56C Mount 6AM-NRV-22A Reversible SM6AMAN 3.6 7,9 NEMA 56C Mount 8AM-NRV-5B Reversible VA8X SM8AMA 4.8 7, Face Mount 8AM-NRV-42A Reversible SM8AMA 4.8 7, Face Mount 8AM-FRV-2B Reversible VA8J SM8AMA (w/ SM8AM-AH64) 4.8 7, Foot Mount 8AM-FRV-3A Reversible SM8AMA (w/ SM8AM-AH64) 4.8 7, Foot Mount 8AM-NRV-28A Reversible VA8C SM8AMAN 4.8 7, NEMA 145TC Mount 8AM-NRV-32A Reversible SM8AMAN 4.8 7, NEMA 145TC Mount 51

Series Select Multi-Vane Air Motors SM1AM and SM1AM-AG587 FOOTMOUNT DIMENSIONS MAXIMUM ALLOWABLE SPEED SHAFT RADIAL (LBS.) 6 4 2 9 PSIG 7 PSIG 3 2 1 52 14 156 (SCFM) SPEED FOR DETERMINING SHAFT RADIAL.36 9 PSIG.14.28.42 7 PSIG 9 PSIG 7 PSIG.24.12 POWER () SM1AM 52 14 156 SM1UP and SM1AM-AG587 FOOTMOUNT DIMENSIONS MAXIMUM ALLOWABLE SPEED SHAFT RADIAL (LBS.) 6 4 2 9 PSIG 7 PSIG 3 2 1 52 14 156 (SCFM) SPEED FOR DETERMINING SHAFT RADIAL.36 9 PSIG.22.44.68 7 PSIG 9 PSIG 7 PSIG.24.12 POWER () SM1UP 432 864 1296 52

Series Select Multi-Vane Air Motors SM2AMC and SM2AM-AH636 FOOTMOUNT DIMENSIONS 3X 2.5 [63.6] 1-2UNC - 2B THD 4 2x 15 2.5 [63.5] 1.25 [31.8] 2X 1 4 1.72 [43.7] NPT 3.29 [83.5] 5.53 [14.5] 1.75 [44.45].5 [12.71].63 [16.] 1.13 [28.7] 1. [25.4].45 [11.4] 5.2 [127.4] 2.86 [72.5] 4.49 [114.] 1.51 [38.4] 5. [127.] 6.87 [174.5] 3.5 [88.9].25 [6.4] 4x.28 [7.1] 3. [76.2] 3.75 [95.3] 1.5 [38.1] 2X 2.34 [59.5] 2X 3.28 [83.4] 4x.5 [12.7] SM2AMAN NEMA MOUNT DIMENSIONS ø 6.5 [165.] 2.6 [52.3] 1.41 [35.8].19 [4.8] SQ KEY 5.76 [146.2] 1.54 [39.].7 [17.8] 4.5 [114.3] 4X - 16UNC - 2B THD 3 8 4X 9 45 ø 5.88 [149.4].625 [15.88].13 [3.3] SPEED FOR DETERMINING SHAFT RADIAL.96.8 1.6 2.4 7 PSIG 9 PSIG 7 PSIG 9 PSIG SM2AM 272 544 816.64.32 POWER () SHAFT RADIAL (LBS.) 4 8 12 MAXIMUM ALLOWABLE SPEED 9 PSIG 7 PSIG SM2AM 272 544 816 6 4 2 (SCFM) 53

Series Select Multi-Vane Air Motors SM4AMB and SM4AM-AH634 FOOTMOUNT DIMENSIONS 5.81 [147.7] 2.5 [63.5].63 [16.] 3.25 [82.5] 3X 2.5 [63.6] 1-2UNC - 2B THD 4 2x 15 1.25 [31.8] 2X 1 4 1.72 [43.7] NPT 3.37 [85.6] 5.61 [142.6] 1.12 [28.4].5 [12.7] NUMBER 3 WOODRUFF KEYWAY.5 [12.71] 1.75 [44.45].56 [14.1] 4.49 [114.] 1.5 [38.] 5. [127.] 6.87 [174.5] 3.5 [88.9].25 [6.4] 4x.28 [7.1] 3. [76.2] 1.5 [38.1] 2X 2.53 [64.2] 2X 3.47 [88.2] 4x.5 [12.7] 3.75 [95.3] SM4AMAN NEMA MOUNT DIMENSIONS 6.56 [166.7] 1.94 [49.3] ø 6.5 [165.].7 [17.8] ø 5.88 [149.4] 4.5 [114.3] 2.6 [52.3] 1.41 [35.8].19 [4.8] SQ KEY.625 [15.88] 4X 4X 9 3-16UNC - 2B THD 8 45.13 [3.3] SPEED FOR DETERMINING SHAFT RADIAL 1.65 54 1.45 2.9 4.35 7 PSIG 9 PSIG 7 PSIG 9 PSIG SM4AM 277 554 831 1.1.55 POWER () SHAFT RADIAL (LBS.) 1.45 2.9 4.35 MAXIMUM ALLOWABLE SPEED 9 PSIG 7 PSIG SM4AM 277 554 831 12 8 4 (SCFM)

Series Select Multi-Vane Air Motors SM6AMA and SM6AM-AH636 FOOTMOUNT DIMENSIONS 5 6X 16-18UNC - 2B THD.44 [11.11] MIN DEEP 2X 12 4. [11.6].7 2.76 [7.] 1.38 2X 1 2 2.17 [55.2] NPT 4.34 [11.2] 7.3 [178.5].43 [11.] 1.51 [38.4] 1. [25.4].19 [4.8] SQ KEY 2.5 [63.5] 7.23 [183.5] 4.32 [183.5].625 [15.88] 5. [127.] 1.69 [42.9] 7.84 [199.1] 3.12 [79.2] 3.5 [88.9].25 [6.4] 4X.34 [8.6] 4.25 [18.] 5. [127.] 2.13 [54.] 2X 3.14 [79.6] 2X 4.88 [123.8] 4X.75 [19.1] SM6AMAN NEMA MOUNT DIMENSIONS 8. [23.3] 2.84 [72.1] 4X 3 8-16UNC - 2B THD 6.5 [165.].7 [17.8] 5.88 [149.4] 2.6 [52.3] 1.41 [35.8].19 [4.8] SQ KEY 4.5 [114.3].625 [15.88] 4X 9 45.13 [3.3] SPEED FOR DETERMINING SHAFT RADIAL 3.9 3 6 9 9 PSIG 7 PSIG 7 PSIG 9 PSIG SM6AM 277 554 831 2.6 1.3 POWER () SHAFT RADIAL (LBS.) 15 3 45 MAXIMUM ALLOWABLE SPEED 9 PSIG 7 PSIG SM6AM 277 554 831 225 15 75 (SCFM) 55

Series Select Multi-Vane Air Motors SM8AMA AND SM8AM-AH64 FOOTMOUNT DIMENSIONS 2.76 [7.] 1.38 [35.] 8.55 [217.1] 5.23 [133.].56 [14.2] 135.83 [21.1] 2x 1 NPT 2 4.43 [112.5] 2.38 [6.5] 7.32 [186.] 1.53 [38.9] 1.41 [35.8].19 [4.8] SQ KEY ø 3. [76.19] ø 3.88 [98.6] ø.75 [19.5] 5.59 [142.] 4x 3 8-16UNC - 2B THD.47 [12.] MIN DEEP 1.84 [46.8] 7.93 [21.4] 2.5 [63.5] 3.5.25 [6.4] 4X.34 [8.6] 2.25 [57.2] 4.5 [114.3] 4X 3.53 [89.8] 4X 5.54 [14.6] 4X.75 [19.1] 5.49 [139.5] SM8AMAN NEMA MOUNT DIMENSIONS 9.45 [239.9] 3.81 [96.7] 2.13 [54.1] ø 6.5 [165.1].19 1.41 [35.8] [4.8] SQ KEY.96 [24.3] ø 5.88 [149.3] 4x 3-16UNC - 2B THD 8 ø 4.5 [114.3] ø.875 [22.22] 4X 9 45.13 [3.3] SPEED FOR DETERMINING SHAFT RADIAL 5.4 4.9 9.8 14.7 9 PSIG 7 PSIG 7 PSIG 9 PSIG SM8AM 2425 485 7275 3.6 1.8 POWER () SHAFT RADIAL (LBS.) 2 4 6 MAXIMUM ALLOWABLE SPEED 9 PSIG 7 PSIG SM8AM 2425 485 7275 3 2 1 (SCFM) 56

Rotary-Vane Pneumatic Milling & Sawing Motors 57

Rotary-Vane Pneumatic Milling & Sawing Motors 58

-Series Forward-Rotation Milling Motors,1/4" Capacity SPECIFICATIONS NON-REVERSIBLE -.25 H.P.. 3. 2 4 9.36 9.84 5.7 6. 1.92 2.1 1.17 1.26.258.264 6.24 6.56 3.8 4. 1.28 1.4.78.84.172.176. 1 8. 1 2 POWER () 3.12 3.28 1.9 2..64.7.39.42.86.88. 6 SPEED ( RPM ) STANDARD EQUIPMENT M o d e l 7 5 3 7 - C, 7 5 3 7-2 - C, 7 5 4 2 - C, 6 7 5 4 7 - C, 5 9 7 5 3 6 - B, 7 5 3 6-2 - B, 7 5 4 1 - B, 4 7 7 5 4 6 - B, 4 6 5 7 5 3 5 - C, 7 5 3 5-2 - C, 7 5 4 - B 8 5 7 5 4 5 - B 8 7 5 3 4 - B, 7 5 3 4-2 - B, 7 5 3 9 - B 9 4 7 5 4 4 - B 8 9 7 5 3 3 - B, 7 5 3 3-2 - B, 7 5 3 8 - B 8 7 5 4 3 - B 7 5 6 1 3, 2 1 9, 8 6 1 3, 1 8 1 9, 7 7 1 2, 9 4 4, 4 1 1 2, 9 3 4, 3 9 5 8 1, 7 7 2, 6 5 5 8 1, 7 6 2, 6 4 2 5 8 8 8 8 2 2 5 7 8 8 6 7 1 3 6 5 4 1 3 5 5 2 5 EQUIPMENT OPTIONS NO COST OPTION 4588 FOOT MOUNTING BRACKET 41563 FLANGE MOUNTING BRACKET 59

Dimensions -Series Milling Motors & Mounts -SERIES AND MOUNTING ACCESSORY DIMENSIONS 6

-Series Forward-Rotation Milling Motors SPECIFICATIONS NON-REVERSIBLE -.6 H.P.. 6 5. 5 2 28.8 23.52 17.76 14.4 9. 5.4 4.2 2.58.84 19.2 15.68 11.84 9.6 6. 3.6 2.8 1.72.56. 3 9. 2 6 POWER () 9.6 7.84 5.92 4.8 3. 1.8 1.4.86.28. 1 3 SPEED ( RPM ) M o d e l 8 2 2 9-1 A, 8 2 3-1 A, 8 2 3 2-1, 8 2 2 9-2 A, 8 2 3-2 A, 8 2 3 2-2, 8 8 2 2 9-3 A, 8 2 3-3 A, 8 2 3 2-3, 1 1 8 2 2 9-4 A, 8 2 3-4 A, 8 2 3 2-4 8 8 8 2 2 9-5 A, 8 2 3-5 A, 8 2 3 2-5 2 8 2 2 9-6 A, 8 2 3-6 A, 8 2 3 2-6 1 5 8 2 2 9-7 A, 8 2 3-7 A, 8 2 3 2-7 5 2 8 2 2 9-8 A, 8 2 3-8 A 8 9 8 2 2 9-9 A, 8 2 3-9 A 5 9 6 1 2, 1 8, 1 3, 6 5, 4 1 2, 2 2 3, 3 3 8 1, 7 7 6 2, 6 6 4 5 1, 4 1, 5 6 3 6 3 9 4 5 2 5 4 7 5 6 1 3 7 8 5 6 7 1 3 1 8 4 7 7 STANDARD EQUIPMENT EQUIPMENT OPTIONS NO COST OPTION 41561 FOOT MOUNTING BRACKET 41561 FLANGE MOUNTING BRACKET 61

Dimensions -Series Milling Motors & Mounts -SERIES AND MOUNTING ACCESSORY DIMENSIONS 62

22-Series Forward - Rotation Milling Motors SPECIFICATIONS NON-REVERSIBLE -.85 H.P.. 9. 7 2 66. 36. 19.2 9. 4.8 1.2 44. 24. 12.8 6. 3.2.8. 5 4. 3 6 POWER () 22. 12. 6.4 3. 1.6.4. 1 8 SPEED ( RPM ) M o d e l 7 8 - B ( - 1 B, - 2 B, - 4 B ), 7 1 1, 4 7 8 1 - B ( - 1 B, - 2 B, - 3 B, - 4 B ), 4 4 2, 8 8 7 8 2 - B ( - 1 B, - 2 B, - 4 B ) 7 9 5, 5 9 7 8 3 - B ( - 1 B, - 2 B, - 3 B, - 4 B ) 3 7 8 5 6 7 8 4 - B ( - 1 B, - 2 B, - 3 B ) 2 4 8 7 8 5 - B ( - 1 B, - 3 B, - 4 B ) 1 1 2 5 1 7, 1 1 4, 3 2 1 2, 3 8 5 7 1, 1 3 4 4 6 1 2 2 3 3 STANDARD EQUIPMENT EQUIPMENT OPTIONS NO COST OPTION 4558 FOOT MOUNTING BRACKET 41559 FLANGE MOUNTING BRACKET 63

Dimensions 22-Series Milling Motors & Mounts 22-SERIES AND MOUNTING ACCESSORY DIMENSIONS 64

22-Series Forward-Rotation Side Mount Milling Motors. 9. 7 2 66. 36. 19.2 9. 4.8 1.2 44. 24. 12.8 6. 3.2.8. 5 4. 3 6 POWER () 22. 12. 6.4 3. 1.6.4. 1 8 SPEED ( RPM ) M o d e l 7 8 - B ( - 1 B, - 2 B, - 4 B ), 7 1 1, 4 7 8 1 - B ( - 1 B, - 2 B, - 3 B, - 4 B ), 4 4 2, 8 8 7 8 2 - B ( - 1 B, - 2 B, - 4 B ) 7 9 5, 5 9 7 8 3 - B ( - 1 B, - 2 B, - 3 B, - 4 B ) 3 7 8 5 6 7 8 4 - B ( - 1 B, - 2 B, - 3 B ) 2 4 8 7 8 5 - B ( - 1 B, - 3 B, - 4 B ) 1 1 2 5 1 7, 1 1 4, 3 2 1 2, 3 8 5 7 1, 1 3 4 4 6 1 2 2 3 3 NON-REVERSIBLE -.85 H.P. STANDARD EQUIPMENT EQUIPMENT OPTIONS 83. 22-SERIES AND MOUNTING ACCESSORY DIMENSIONS 65

Dimensions 22-Series Forward-Rotation Straddle Milling Motors. 9. 7 2 66. 36. 19.2 9. 4.8 1.2 44. 24. 12.8 6. 3.2.8. 5 4. 3 6 POWER () 22. 12. 6.4 3. 1.6.4. 1 8 SPEED ( RPM ) M o d e l 7 8 - B ( - 1 B, - 2 B, - 4 B ), 7 1 1, 4 7 8 1 - B ( - 1 B, - 2 B, - 3 B, - 4 B ), 4 4 2, 8 8 7 8 2 - B ( - 1 B, - 2 B, - 4 B ) 7 9 5, 5 9 7 8 3 - B ( - 1 B, - 2 B, - 3 B, - 4 B ) 3 7 8 5 6 7 8 4 - B ( - 1 B, - 2 B, - 3 B ) 2 4 8 7 8 5 - B ( - 1 B, - 3 B, - 4 B ) 1 1 2 5 1 7, 1 1 4, 3 2 1 2, 3 8 5 7 1, 1 3 4 4 6 1 2 2 3 3 NON-REVERSIBLE -.85 H.P. STANDARD EQUIPMENT EQUIPMENT OPTIONS 83. 83. 22-SERIES AND MOUNTING ACCESSORY DIMENSIONS 66

44-Series Forward-Rotation Milling Motors SPECIFICATIONS NON-REVERSIBLE - 2. H.P. 2. 2 5 1. 8 148.8 84.6 48.6 21.6 12.24 3.42 99.2 56.4 32.4 14.4 8.16 2.28 1. 3 5. 9 POWER () 49.6 28.2 16.2 7.2 4.8 1.14. 4 5 SPEED ( RPM ) M o d e l 8 2 5 - A, 8 2 5-4 A - ( ) 4, 5 9, 1 3, 5 8 2 4 - A, 8 2 4-4 A - ( ) 1, 1 2 5 2, 2 5 3, 3 7 5 8 2 3-4 A - ( ) 6 3 8 1, 2 7 6 1, 9 1 4 8 2 2 - A, 8 2 2-4 A - ( ) 2 9 1 5 8 2 8 7 3 8 2 1 - A, 8 2 1-4 A - ( ) 1 6 3 2 4 8 8 2 - A, 8 2-4 A - ( ) 8 9 1 7 8 2 6 7 STANDARD EQUIPMENT EQUIPMENT OPTIONS NO COST OPTION 459 FOOT MOUNTING BRACKET 41557 FLANGE MOUNTING BRACKET 67

Dimensions 44-Series Milling Motors & Mounts 44-SERIES AND MOUNTING ACCESSORY DIMENSIONS 68

Model 22N51-W/RC Multi-Vane Air Motors SPECIFICATIONS Air Speed at Consumption Model Max. Power Max. Power Free Speed Starting Torque Stall Torque at Max. Power Weight hp kw rpm rpm Ib.-ft. Nm Ib.-ft. Nm scfm m 3 /m lb. kg Reversible 22N51-W/RC 1.75 1.31 28 28 49 66.4 66 89.5 55 1.6 21 9.5 Performance figures are at 9 psig (62 kpa) air pressure. 22N51-W/RC DIMENSIONS 3-1/4" (83.mm) 1/2" NPT EXHAUST PORT SPEED SHAFT RADIAL (LBS.) 25 5 75 24 16 8 1 2 3 SPEED FOR DETERMINING SHAFT RADIAL 9 PSIG 7 PSIG 7 PSIG 9 PSIG 9 PSIG 7 PSIG 22N51-W/RC 1 2 3 6 4 2 1.8 1.2.6 POWER () (SCFM) 1-17/32" (39.mm) 1/2" NPT REVERSE INLET 1-3/4" (273.mm) 3." (76.mm) 12-7/16" (316.mm) 12-7/32" (31.mm) 2-1/4" (57.mm) 9-1/2" (241.mm) 5-1/2" (14.mm) 1/2" NPT FORWARD INLET 1-1/4" (32.mm) SHAFT RADIAL 13/32" (1.mm) DIA 4 HOLES 7-3/16" (183.mm).75" D.5" (19.5mm.13mm) 9/16" (14.mm) KEY 3/16" SQ. x 1-1/8" (4.75mm SQ. x 28.6mm) 69

Series 551 Multi-Vane Air Motors SPECIFICATIONS Air Speed at Consumption Model Max. Power Max. Power Free Speed Starting Torque Stall Torque at Max. Power Weight hp kw rpm rpm Ib.-ft. Nm Ib.-ft. Nm scfm m 3 /m lb. kg Reversible 551SM51-W/RC 5.6 4.18 95 12 4 542 545 739 16 4.53 93 42.2 551SO51-W/RC 5.6 4.18 59 77 65 881 885 12 16 4.53 93 42.2 ALL models must be operated with sufficient load to prevent speed from exceeding maximum allowable speed shown on performance curve. Performance figures are at 9 psig (62 kpa) air pressure. SERIES 551 DIMENSIONS 6." (152.mm) 4-1/4" (18.mm) SHAFT RADIAL (LBS.) 966 644 322 7 6 4 2 24 16 8 SPEED 41 82 123 SPEED FOR DETERMINING SHAFT RADIAL 551SM51 551SO51 9 PSIG 7 PSIG 9 PSIG 7 PSIG 9 PSIG 7 PSIG 41 82 123 26 52 78 18 12 6 6 4 2 POWER () (SCFM) 1-3/4" (45.mm) 3/4" NPT REVERSE INLET 14." (356.mm) 21/32" (17.mm) DIA 4 HOLES 5-3/8" (137.mm) 19-1/16" (484.mm) 18-11/16" (475.mm) 2-3/4" (7.mm) 12-1/2" (318.mm) 7." (178.mm) 3/4" NPT FORWARD INLET 3." (76.mm) SHAFT RADIAL 1." NPT EXHAUST 15." (381.mm) 2.".5" (51.mm.13mm) 1-3/8" (35.mm) KEY 1/2" SQ. x 2-3/4" (13.mm SQ. x 7.mm)

Direct and Geared Drive Piston Air Motors SPECIFICATIONS Air Speed at Consumption Model Max. Power Max. Power Free Speed Starting Torque Stall Torque at Max. Power Weight hp kw rpm rpm Ib.-ft. Nm Ib.-ft. Nm scfm m 3 /m lb. kg Direct Drive Reversible CCM 2.5 1.53 175 214 13.2 17.9 18.8 25.5 97 2.7 135 61.2 DD6M 2.6 1.94 75 149 24 32.5 34.2 46.4 79 2.2 135 61.2 EEM 4.4 3.28 735 145 41 55.6 59 8 137 3.9 2 9.7 EE5M 7.8 5.82 95 1875 6 81.4 8.5 19.2 22 6.2 21 95.3 HHM 11.3 8.43 73 145 16 144 152 26 27 7.6 235 17 HH5M 15.2 11.33 75 15 146 198 195 264 4 11.3 25 113 KK6M 25 18.64 755 15 26 353 325 441 68 19.3 475 216 Geared Drive Reversible EE3G 5 3.73 275 56 122 165 175 237 155 4.4 2 9.7 EE53G 6.8 5.7 35 6 154 29 25 278 22 6.2 22 99.8 EE9G 4.7 3.51 92 19 357 484 51 692 155 4.4 21 95.3 EE59G 6.5 4.85 1 2 45 61 6 814 22 6.2 23 14 ALL models must be operated with sufficient load to prevent speed from exceeding maximum allowable speed shown on performance curve. All of the above motors are furnished less valve and piping as standard. Performance figures are at 9 psig (62 kpa) air pressure. SHAFT RADIAL (LBS.) 6.6 13.2 19.8 6 4 2 742 1484 2226 MAXIMUM ALLOWABLE SPEED 9 PSIG 7 PSIG 152.4 11.6 5.8 SPEED FOR DETERMINING SHAFT RADIAL 2.16 9 PSIG 7 PSIG 9 PSIG 7 PSIG 1.44.72 POWER () (SCFM) SHAFT RADIAL (LBS.) MAXIMUM ALLOWABLE SPEED 8 6 4 2 11.9 23.8 35.7 9 PSIG 7 PSIG 126 517 134 1551 SPEED FOR DETERMINING SHAFT RADIAL 2.7 9 PSIG 7 PSIG 9 PSIG 7 PSIG 84 42 1.8.9 POWER () (SCFM) CCM 742 1484 2226 DD6M 517 134 1551 71

Direct and Geared Drive Piston Air Motors SHAFT RADIAL (LBS.) 21.4 42.8 64.2 MAXIMUM ALLOWABLE SPEED 8 6 4 2 53 16 159 9 PSIG 7 PSIG 216 144 SPEED FOR DETERMINING SHAFT RADIAL 4.8 9 PSIG 7 PSIG 9 PSIG 7 PSIG 72 3.2 1.6 POWER () (SCFM) SHAFT RADIAL (LBS.) MAXIMUM ALLOWABLE SPEED 8 6 4 2 28.1 56.2 84.3 9 PSIG 7 PSIG 345 23 115 65 13 195 SPEED FOR DETERMINING SHAFT RADIAL 8.1 9 PSIG 7 PSIG 9 PSIG 7 PSIG 5.4 2.7 POWER () (SCFM) EEM 53 16 159 EE5M 65 13 195 SHAFT RADIAL (LBS.) MAXIMUM ALLOWABLE SPEED 2 15 1 5 54 18 162 9 PSIG 7 PSIG 53 16 159 SPEED FOR DETERMINING SHAFT RADIAL 12 9 PSIG 7 PSIG 9 PSIG 7 PSIG 423 282 141 8 4 POWER () (SCFM) HHM 53 16 159 72

Direct and Geared Drive Piston Air Motors SHAFT RADIAL (LBS.) MAXIMUM ALLOWABLE SPEED 2 15 1 5 71 142 213 9 PSIG 7 PSIG 52 14 156 SPEED FOR DETERMINING SHAFT RADIAL 16.5 9 PSIG 7 PSIG 9 PSIG 7 PSIG 642 428 214 11 5.5 POWER () (SCFM) SHAFT RADIAL (LBS.) MAXIMUM ALLOWABLE SPEED 2 117 234 351 15 1 5 52 14 156 9 PSIG 7 PSIG SPEED FOR DETERMINING SHAFT RADIAL 27 9 PSIG 7 PSIG 9 PSIG 7 PSIG 174 716 358 18 9 POWER () (SCFM) HH5M 52 14 156 KK6M 52 14 156 MAXIMUM ALLOWABLE SPEED SHAFT RADIAL (LBS.) 27 18 9 64 128 192 9 PSIG 7 PSIG 246 164 198 396 594 SPEED FOR DETERMINING SHAFT RADIAL 5.4 9 PSIG 7 PSIG 9 PSIG 7 PSIG 82 3.6 1.8 POWER () (SCFM) EE3G 198 396 594 73

Direct and Geared Drive Piston Air Motors SHAFT RADIAL (LBS.) 76 152 228 24 16 8 28 416 624 MAXIMUM ALLOWABLE SPEED 9 PSIG 7 PSIG 345 23 115 SPEED FOR DETERMINING SHAFT RADIAL 7.5 9 PSIG 7 PSIG 9 PSIG 7 PSIG 5. 2.5 POWER () (SCFM) SHAFT RADIAL (LBS.) 6 4 2 185 37 555 MAXIMUM ALLOWABLE SPEED 9 PSIG 225 15 66 132 198 SPEED FOR DETERMINING SHAFT RADIAL 5.1 9 PSIG 7 PSIG 9 PSIG 7 PSIG 7 PSIG 75 3.4 1.7 POWER () (SCFM) EE53G 28 416 624 EE9G 66 132 198 MAXIMUM ALLOWABLE SPEED SHAFT RADIAL (LBS.) 45 3 15 214 428 642 9 PSIG 36 24 12 7 14 21 SPEED FOR DETERMINING SHAFT RADIAL 6.9 9 PSIG 7 PSIG 9 PSIG 7 PSIG 7 PSIG 4.6 2.3 POWER () (SCFM) EE59G 7 14 21 74

Direct and Geared Drive Piston Air Motors DIRECT DRIVE DIMENSIONS F G H O P Q V INLET BOTH SIDES FORWARD INLET EXHAUST REVERSE INLET L R J Y X T K W EXHAUST SHAFT RADIAL DIMENSIONS IN INCHES Model A B C D E F G H J K L O P** Q R* S T V W X Y Thd. Key Dia. NPT NPT CCM, DD6M 23 9 16 3 3 4 7 3 4 7 7 8 1 1 2 EEM, EE5M 27 3 13 16 9 3 4 9 9 32 12 1 2 HHM 24 3 16 4 5 16 7 9 7 8 13 1 2 HH5M 24 3 16 4 5 16 7 9 7 8 13 1 2 KK6M 3 1 4 4 3 4 8 5 8 12 5 8 13 1 2 B C D A Model A B C D E F G H J K L O P Q R* S T X Y Thd. Key Dia. CCM, DD6M 599 95 197 2 267 2 188 284 76 222 397 349 1"-8 6 x 6 28 2 68 22 68 EEM, EE5M 686 97 248 236 318 2 242 318 76 237 427 381 1"-8 6 x 6 28 2 75 22 68 HHM 614 11 178 251 343 5 178 356 76 225 438 438 + 1 x 1 35 17 97 32 33 HH5M 614 11 178 251 343 5 178 356 76 225 438 438 + 1 x 1 35 17 97 32 33 KK6M 768 121 219 321 343 3 195 462 18 38 565 559 + 1 x 1 41 17 11 35 48 + The end of the shaft is not threaded on these Motors and no nut is used. *Tolerance: + -.13mm 25 32 7 13 32 11 3 16 3 8 3 4 15 5 8 13 3 4 1"-8 1 4 x 1 4 1.125 25 32 2 11 16 + The end of the shaft is not threaded on these Motors and no nut is used. *Tolerance: + -.5" **Thd. UNC2A. DIMENSIONS IN MILLIMETERS S-THRU 4 HOLES E 3 4 1 7 8 2 11 16 25 32 9 17 32 12 17 32 3 9 5 16 16 13 16 15 1"-8 1 4 x 1 4 1.125 25 32 2 15 16 1 1 7 8 2 11 16 3 16 7 14 3 8 7 8 17 1 4 17 1 4 + 3 8 x 3 8 1.375 21 32 3 13 16 1 1 1 4 1 1 4 1 5 16 3 16 7 14 3 8 7 8 17 1 4 17 1 4 + 3 8 x 3 8 1.375 21 32 3 13 16 1 1 1 4 1 1 4 1 5 16 1 8 7 11 16 18 3 16 4 1 4 12 1 8 22 1 4 22 + 3 8 x 3 8 1.625 21 32 4 5 16 1 1 4 1 1 2 1 3 8 1 7 8 GEARED DRIVE DIMENSIONS 3/4-16 UNF-2A 1-1/8" (29.mm) 1-15/16" (49.mm) 2-3/32" (53.mm) AC SHAFT RADIAL B 15-1/4" (387.mm) 5-3/4" (146.mm) 7-3/4" (197.mm) 1." (25.mm) 23-1/2" (597.mm) 13-9/16" (345.mm) 12-9/16" (315.mm) 1." NPT AIR INLET BOTH SIDES 1." NPT EXHAUST 2-15/16" (65.mm) CENTER OF POWER SHAFT FOR S EE3G AND EE53G FORWARD INLET FOR EE9G / EE59G REVERSE INLET FOR EE3G / EE53G 3-9/32" (83.mm) 7-3/4" (194.mm) DIMENSIONS S A* B KEY C in. mm in. mm in. mm EE3G, EE53G 1.251 31.78 4 15 32 114 1 4 x 1 4 x 1 25 32 6 x 6 x 45 EE9G, EE59G 1.51 38.13 3 5 8 92 3 8 x 3 8 x 1 11 16 1 x 1 x 43 *Tolerance: + -.5" (.13mm) 1-5/8" (41.mm) 15." (381.mm) 11-3/4" (299.mm) 1-25/32" (45.mm) 4-1/8" (15.mm) FORWARD INLET FOR EE3G / EE53G REVERSE INLET FOR EE9G / EE59G CENTER OF POWER SHAFT FOR S EE9G AND EE59G 25/32" (2.mm) 1/4" (6.mm) DIA 5/8" (16.mm) 75

MMP15 Air Motors CODE EXPLANATION Example: MMP15-A--B-2-A MMP15 - A B 2 A Series: MMP15 Air Motor Interface/Shaft Options: A = Standard Spline B = NEMA 215TC C = Hydraulic SAE B Adapter D = Keyed Shaft (Fenner RM41) Mounting Options: = Standard 1 = Base Mount Control Options: A = None B = Manual Valve C = Panel Mount Valve D = Pendant E = Accu-Trol Rotary Valve Bias Options: 1 = CCW (counter-clockwise), Standard Bias Rotation* 2 = CW (clockwise), Reverse Bias Rotation* Power Options: A = Air B = Natural Gas *As viewed from crankshaft end of motor. PERFORMANCE Air Speed at Consumption Model Max. Power Max. Power Free Speed Starting Torque Stall Torque at Max. Power hp kw rpm rpm Ib.-ft. Nm Ib.-ft. Nm scfm m 3 /m MMP 15 16. 11.9 18 38 61. 82.7 78. 15.8 425 12. Performance figures are at 9 psig (6.2 Bar) air pressure. 8 7 Figure 1: MMP15 Air Motor Performance 425 cfm Air Supply at 9 psi Maximum Allowable Speed 16 14 Motor Torque (ft-lbf) 6 5 4 3 2 Torque Horsepower 12 1 8 6 4 Motor Horsepower 1 2 5 1 15 2 25 3 35 4 Motor RPM 76

MMP15 Air Motors 77

KK5B Piston Air Motors SPECIFICATIONS Air Speed at Consumption Model Max. Power Max. Power Free Speed Starting Torque Stall Torque at Max. Power Weight hp kw rpm rpm Ib.-ft. Nm Ib.-ft. Nm scfm m 3 /m lb. kg Reversible KK5B546 29 21.6 9 18 183 248 3 47 795 22.5 KK5B55 3 22.3 88 175 22 274 325 441 85 24.1 ALL models must be operated with sufficient load to prevent speed from exceeding maximum allowable speed shown on performance curve. Performance figures are at 9 psig (62 kpa) air pressure. MAXIMUM ALLOWABLE SPEED KK5B55 STD ROTARY VALVE MAXIMUM ALLOWABLE SPEED 1 2 3 4 HORSEPOWER 4 1 2 3 9 PSIG 7 PSIG 9 PSIG 7 PSIG (SCFM) 16 12 8 4 9 PSIG 7 PSIG SCFM SPEED (RPM X 1) SPEED (RPM X 1) 4 8 12 16 2 4 8 12 16 2 MAXIMUM ALLOWABLE SPEED KK5B546 STD ROTARY VALVE MAXIMUM ALLOWABLE SPEED 1 2 3 4 HORSEPOWER 4 1 2 3 9 PSIG 7 PSIG 9 PSIG 7 PSIG (SCFM) 16 12 8 4 9 PSIG 7 PSIG SCFM SPEED (RPM X 1) SPEED (RPM X 1) 4 8 12 16 2 4 8 12 16 2 78

KK5B Piston Air Motors KK5B NUMBER SYMBOLIZATION KK5B55 B C 2 A Motorsize Mounting Output Control Controller Rotary Options Options Shaft Options Options Valve Options Options EXAMPLE KK5B55-B2BA Rotary Valve Option A Equal Powered Controller Option None Control Option B Manual Throttle Output Shaft Option 2 Keyed Shaft 1 5 8" Dia. Mounting Option B Base Mount Motor Option 55 3 Motor Weight Option Code Description lb. kg Part Number Motor Options 546 29 Horsepower Motor 251 113 KK5B546 55 3 Horsepower Motor 251 113 KK5B55 Mounting Options A Flange Mount, STD with SAE C 2 & 4 Bolt Mount Standard B Base Mount, Stationary Mounting 45 2 K5B - Foot Output Shaft Options *SAE C, STD with SAE C 14 Tooth Female Spline Input Standard 1 **NEMA 213TC and 215TC, Keyed Shaft 1 3 8" dia. 13 6 K5B - NEMA - 213 2 ***Keyed Shaft 1 5 8" dia. 24 11 K5B - Shaft - 1.625 Control Options A None Standard B Manual Throttle, Control Mounted Directly on Motor 19 19 K5B - Manual C Pilot Air Control, Required for Remote Controller Options 9 4 K5B - Pilot Controller Options None Standard 1 Pendant Control, STD 2 Button Pendant MLK-K269C 2 Panel Control, Required for Remote Stationery Mounted Control UWD - A686 Rotary Valve Options A Equal Powered Standard B Biased Powered CCW POA C Biased Powered CW POA *Flange Gasket Required **Single Bearing Mount ***Double Bearing Mount EXAMPLE KK5B55 - B2AA ARRANGEMENT KK5B MOTOR 36 3/8 KEY x 3.5 LONG 11.25 RADIAL (LBS.) 27 18 9 1.625 DIA. SHAFT K5B-SHAFT-1.625 KIT 1.375 DIA. SHAFT K5B-NEMA-213 KIT 1.6 9. 8.27 2 4 6 8 1 12 79

KK5B Piston Air Motors KK5B PISTON AIR MOTOR 72 TYP FORWARD INLET 6.5 REVERSE INLET 3.94 1-1/4-11-1/2 NPT - 2 PLACES 16.123 16.12 DIA 2.253 14 TOOTH INTERNAL SPLINE 36 9 SAE C 2 OR 4 BOLT MOUNTING PAD 3.63 13.373 13.371 DIA 3.63 17.88 EXHAUST 2-1/2-8 NPT 16.65.38.81 2.253 5.3 5.1 DIA.375 DEEP 5/8-11 UNC - 2B 2 PLACES 1/2-13 UNC - 2B 4 PLACES.63 DIA.5 DEEP 2 PLACES.56 DIA -1 PLACES 15. DIA BOLT CIRCLE 2.253 2.253 3.562 TOP AND SIDE VIEWS (FACING SHAFT) TOP VIEWS A A A A B B B 9. 1.31 1.31 1/4 NPT 1-1/4 NPT 1.31 1.19 3.87 8.15 CONTROL INLET CCW (4) OUTLET CW 3.12 4.25 7.76 13.98 1/4 NPT CONTROL 1-1/2 NPT EXHAUST 3.82 1-1/2 NPT INLET 1-1/4 NPT INLET (CHOICE OF 3 PLACES) 4.5 1.2 6.5 1-1/4 NPT INLET CW (4) OUTLET CCW 4.94 11.4 13.63 C 6. 6. SIDE VIEWS.56 DIA 4 PLACES C 1.375 1.374 5/16 KEY x 1.5 LONG C 1.625 1.624 3/8 KEY x 3.5 LONG PILOT VALVE (OPTION) K5B-PILOT SEE NOTES 1, 2, AND 3 1-1/2 NPT EXHAUST 4.25 MANUAL THROTTLE (OPTION) K5B-MANUAL SEE NOTES 1 AND 5 PILOT CONTROL (OPTIONS) 2-1/2 NPT EXHAUST 3.94 16.123 STD. MOTOR KK5B546/KK5B55 STD. WITH SAE C 2 AND 4 BOLT MOUNT 14 TOOTH INTERNAL SPLINE 1/8 NPT SUPPLY 1.6 FOOT MOUNT (OPTION) K5B-FOOT 11.25 NEMA C (OPTION) K5B-NEMA-213 NEMA 213 AND 215 KEYED SHAFT (OPTION) K5B-SHAFT-1.625 1) PERFORMANCE REDUCTION OF 2% - SAME STARTING AND STALL BUT REDUCED HORSEPOWER AND FREE SPEED AS VALVING RESTRICTS MAX. AIR FLOW PENDANT MLK-K269C (INCLUDES FITTINGS) 3/16" ID HOSE MUST BE PURCHASED SEPARATELY 5923 - SPECIFY LENGTH IN FEET 3 HOSES REQUIRED SEE NOTES 2 AND 3 1/8 NPT CONTROL PANEL MOUNT UWD-A686 HOSE-FITTINGS-TUBING NOT INCLUDED 3/16 TO 1/4 RECOMMENDED 3 LINES REQUIRED SEE NOTES 2 AND 3 2) FOR CONTROL LINE LENGTHS GREATER THAN 5 FT. AND FOR EVERY 5 FT. THEREAFTER, INSTALL TWO QUICK EXHAUST VALVES IN CONTROL LINES: MK-939-6, 1/4" ID HOSE 3) AIR PILOT CONTROLS GIVE GOOD CONTROL UP TO 1 FT. AS THE CONTROL LINES LENGTHEN, THE CONTROL RESPONSE DETERIORATES. ROUTE CONTROL LINES IN THE SHORTEST MANNER PRACTICAL 4) CW-CLOCKWISE ROTATION OF MOTOR LOOKING AT OUTPUT SHAFT OR SPLINE CCW-COUNTERCLOCKWISE ROTATION OF MOTOR LOOKING AT OUTPUT SHAFT OR SPLINE 5) THE MANUAL THROTTLE MAY BE REMOTELY MOUNTED UP TO 3 FT. AWAY USING EITHER 1-1/2" ID HOSE OR PIPE 8

Components and Equipment FILTERS, REGULATORS AND LUBRICATORS Filters Regulators Ingersoll-Rand and ARO Filters, Regulators and Lubricators give increased Motor performance, reduce repair costs and extend Motor life. NPT Flow Rate Bowl Cap. Height Width Depth For Motors Part No. Size scfm oz. in. in. in. Series M2, M4, M7, F25221-4 1 4" 54 2.87 7. 2.6 2.6 Models MRV3, MOV5AA Model MVA8B, Series 181, 1841 F25231-4 3 8" 1 2.87 7. 2.6 2.6 Models MRV15, MVA17A, MVA17B, F25241-4 1 2" 122 2.87 7. 2.6 2.6 Series 38, 384, 48, 484, 17RA, 17RB, 48RA, 48RB, Models 22N51, AAM Models MRV4, MRV5, MVA34A, MVA34B, F25451-11 3 4" 345 32. 11.7 4.75 4.75 Series 34RA, 34RB, 551, Models CCM, DD6M Model MOV75AA, Series 92RA, 92RB, 92RM, 992RM, F25461-11 1" 345 32. 11.7 4.75 4.75 Models EEM, EE5M, HHM, EE3G, EE9G, EE53G, EE59G Models HH5M, KK6M F42-A- 1 1 4" 86 13. 14 7 8" 8 1 2" 8 1 2" Models KK5B546, KK5B55 F35-B-C28 1 1 2" 128 12.5 19.7 7.8 7.75 Adj. NPT Flow Rate Pressure Height Width Depth For Motors Part No. Size scfm Range psi in. in. in. Series M2, M4, M7, R27221-6 1 4" 1 5-125 4.75 2.6 2.6 Models MRV3, MOV5AA Series 181, 1841 R27231-6 3 8" 13 5-125 4.75 2.6 2.6 Models MRV15, MVA17A, MVA17B, R27241-6 1 2" 15 5-125 4.75 2.6 2.6 Series 38, 384, 48, 484, 17RA, 17RB, 48RA, 48RB, Models 22N51, AAM Models MRV4, MRV5 R27451-1 3 4" 18 5-125 7.1 4.25 4.25 Series 551, Models CCM, DD6M Models MVA34A, MVA34B, Series 34RA, 34RB R38-6-FG-28 3 4" 491 1-125 7.83 3.94 3.94 Model MOV75AA, Series 92RA, 92RB, 92RM, 992RM, R38-8-FG-28 1" 491 1-125 7.83 3.94 3.94 Models EEM, EE5M, HHM, EE3G, EE9G, EE53G, EE59G Models HH5M, KK6M R3-A-G 1 1 4" 8 1-125 1.3 2.62 4.3 Models KK5B546, KK5B55 R4-B-G 1 1 2" 12 1-125 11.9 5.3 3.6 Lubricators NPT Flow Rate Bowl Cap. Height Width Depth For Motors Part No. Size scfm oz. in. in. in. Series M2, M4, M7, L26221-1 1 4" 75 6. 7.7 2.6 2.6 Models MRV3, MOV5AA Series 181, 1841 L26231-1 3 8" 1 6. 7.7 2.6 2.6 Models MVA17A, MVA17B, L26241-1 1 2" 11 6. 7.7 2.6 2.6 Series 17RA, 17RB, * 1 2" connection Models MRV15, 22n51-W/RC, Series 38, 384 L28-4-LK-28 1 2" 184 6.11 9.36 2.39 2.39 Models MRV4, MRV5, MVA34A, MVA34B, L28-6-LK-28 3 4" 2 6.11 9.36 2.9 2.9 Series 34RA, 34RB, 551, Models CCM, DD6M Model MOV75AA, Series 92RA, 92RB, 92RM, 992RM, L38-8-LL-28 1" 44 19. 1.67 3.94 3.94 Models EEM, EE5M, HHM, EE3G, EE9G, EE53G, EE59G Models HH5M, KK6M L4-A- 1 1 4" 927 26. 11.61 5.5 5. Models KK5B546, KK5B55 L4-B- 1 1 2" 927 26. 11.61 5.5 5. 81

Components and Equipment Combination FRL s (Filter/Regulator/Lubricator) NPT Flow Rate Adj. Pressure Bowl Capacity Height Width Depth For Motors Part No. Size scfm Range psi oz. in. in. in. Series M2, M4, M7, C28221-8 1 4" 54 5-125 Filter = 2.87 8.25 9.43 4. Models MRV3, MOV5AA Lubricator = 6. Series 181, 1841 C28231-8 3 8" 1 5-125 Filter = 2.87 8.25 9.43 4. Lubricator = 6. Models MRV15, 22N51 C28241-8 1 2" 11 5-125 Filter = 2.87 8.25 9.43 4. Series 38, 384, 17RA, 17RB Lubricator = 6. Models MVA17A, MVA17B, C28-4-FKG-28 1 2" 135 5-125 Filter = 2.87 11.44 6.1 4.35 Series 48, 484, 48RA, 48RB, 17RA, 17RB, Lubricator = 6.11 Models MRV4, MRV5, Series 551, C28453-81 3 4" 18-125 Filter = 32. 15.25 11.75 11.75 Models CCM, DD6M Lubricator = 32. Model MVA34A, MVA34B, 34RA, 34RB Must use individual 3 4" units or 1" model Model MOV75AA, Series 92RA, 92RB, 92RM, C31-8-G 1" 331 1-125 Filter = 2. 11.2 15.3 5.7 992RM, Models EEM, EE5M, HHM, EE3G, EE9G, Lubricator = 26. EE53G, EE59G Features Two stage filtration cartridges remove 99% of liquid contaminants. One micron filter element removes 99% of all dirt particles 1 micron or larger. Quick release bowls enable easy cartridge replacement. Automatic float drain with manual override. Clear polycarbonate bowl with metal guard provides for quick inspection. Benefits Reduces liquid contaminants. Increases Air Motor life. Cuts maintenance costs. LIQUIDATOR FILTERS You can depend on Ingersoll-Rand and ARO Liquidator Filters when you need clean, dry air and your regular filter can't handle high volumes of liquid contaminants. Note that a lubricator should be installed between the Air Motor and the Liquidator. Liquidator Filters Filters Female IR Flow Rate Female ARO Flow Rate NPT Part Number scfm NPT Part Number scfm 1 4" 8842-W1-35 35 1 4" F25221-3 4 3 8" 8843-W1-35 35 3 8" F25231-3 51 1 2" 8844-W1-9 9 1 2" F25241-3 53 3 4" 8846-W1-9 9 3 4" F25452-31 5 1" 8828-W2-* 175 1" F25462-31 15 1 1 4" 883-W1-4 1 1 4" F25472-31 15 2" 8834-W1-7 *Two seperate canisters LUBRICATION Proper lubrication of Air Motors is a must to prevent excessive wear of moving parts; to prevent possible rust and corrosion of bare, unprotected surfaces. Ingersoll-Rand oils and greases have been tested thoroughly and are recommended without reservation. Refer to Operation Manuals and Parts Lists for lubrication instructions. Oils Part Oil Number Number Quantity Recommended Use 1P 1 1 pt Fractional horsepower 1G 1 1 gal Air Motors 5P 5 1 pt One horsepower and 5G 5 1 gal larger Air Motors Greases Part Grease Quantity Number Number lb. Recommended Use 28 1 LB 28 1 Motor gearing and 28 8 LB 28 8 bearings

Air System Components for Pneumatic Motors Filters NPT Flow Rate Bowl Cap. Height Width Depth For Motors Part No. Size scfm oz. in. in. in. Series, F25111-2 1/8" 28.6 3.41 2. 1.75 Series, 22 F25221-4 1/4" 54 2.87 7. 2.6 2.6 Series 44 F25231-4 3/8" 1 2.87 7. 2.6 2.6 Regulators NPT Flow Rate Adj. Pressure Height Width Depth For Motors Part No. Size scfm Range psi in. in. in. Series R27111-1 1/8" 13-125 4. 2. 1.75 Series * Use 1/4" Regulator R27221-6 1/4" 1-125 4.75 2.6 2.6 Series, 22 R27221-6 1/4" 1-125 4.75 2.6 2.6 Series 44 R27231-6 3/8" 13-125 4.75 2.6 2.6 Lubricators NPT Flow Rate Bowl Cap. Height Width Depth For Motors Part No. Size scfm oz. in. in. in. Series, L26111-1 1/8" 41 1.1 5.16 2. 1.75 Series, 22 L26221-1 1/4" 75 6. 7.7 2.6 2.6 Series 44 L26231-1 3/8" 1 6. 7.7 2.6 2.6 Combination FRL s (Filter/Regulator/Lubricator) NPT Flow Rate Adj. Pressure Bowl Capacity Height Width Depth For Motors Part No. Size scfm Range psi oz. in. in. in. Series C28121-8 1/8" 13 5-125 Filter =.6 6.26 4. 3.63 Lubricator = 1.1 Series C28221-8 1/4" 54 5-125 Filter = 2.87 8.25 9.43 4. * Use 1/4" FRL Lubricator = 6. Series, 22 C28221-8 1/4" 54 5-125 Filter = 2.87 8.25 9.43 4. Lubricator = 6. Series 44 C28231-8 3/8" 1 5-125 Filter = 2.87 8.25 9.43 4. Lubricator = 6. 83

Accessories SELF-CLOSING VALVES ONE-STOP REPLACEMENT COMPONENT SHOPPING? 5 5 16-1/2" (419.mm) NO. EU-A685 Self-Closing 4-Way Valve. Air inlet pipe tap 3 4" NPT, Motor connection pipe tap 1" NPT, exhaust pipe tap 3 4" NPT. MUFFLERS Part Number MALE NPT Size MRV3A-AF35** 1 8" MRV15A-AC98* 1 4" SRA1A1-A212*** 3 8" MRV4A-AC99** 1 2" MOV1AA-674* 1 2" 3BM-WM7 3 4" 3BM-A674* 1" 15BM-A674* 1 1 4" SS35-A674* 1 1 2" ST5-674 2" SS8-A674* 2 1 2" * High scfm Capacity ** Medium scfm Capacity *** Low scfm Capacity 3 8" SQUARE DRIVE ADAPTERS These 3 8" Square Drive Adapters have a 3 8"-24 female thread, for use with Series M2 and M4 Motors equipped with threaded shafts. Part Number R144-212-1 R144-212-3 NO. K5B-REMOTE Description 3 8" square drive, 1" long 3 8" square drive, 3" long Self-closing 4-Way Valve. Air inlet pipe tap 1 1 2" NPT, Motor connection pipe tap 1 1 2" NPT, exhaust pipe tap 1 1 2" NPT. ARO motion control and air preparation components include the Alpha valve, Economair cylinder and Module Air air prep lines. Routinely used throughout industry, these lines have made their own name for their precision, durability and overall efficiency. WWW.AROZONE.COM 1-8-276-4658 TAPPED EXHAUST DEFLECTORS FOR PIPED AWAY EXHAUST Motor Pipe Tap Series Part Name Part Number NPT 181 Exhaust Deflector R181-A123 3 4'' 1841 Assembly 38 Exhaust Deflector R38-A123 3 4'' 384 Assembly 48 Exhaust Deflector R48-A123 1" 484 Assembly SPECIAL AIR MOTORS While there are over 3 standard Air Motors in the complete Ingersoll-Rand line, we realize that even this broad selection won't fill every need, every time. Virtually all components of our motors, from output shafts and housings to gear ratios, can be modified. Therefore we welcome the opportunity to design and build Air Motors to our customers' specifications when required. Generally, yearly quantities of 1 plus are cost-effective. However, the opportunity to quote on lower volumes is always welcomed. Frequently custom designed Air Motors can reduce OEM costs by easing product assembly, increasing performance, and avoiding the need to make special parts to incorporate the Air Motor in a product. We have the engineering capabilities to provide you with truly "turnkey" power units. 84 VALVES Part Number Female NPT Size Flow Rate Description E252LM 1/4" 26 scfm 3-Way Hand Lever/Manual Return E212LM 1/4" 26 scfm 4-Way Hand Lever/Manual Return E312LS 1/4" 26 scfm 4-Way, 3-Position Hand Lever, Spring Return K214LM 1/2" 9 scfm 4-Way Hand Lever/Manual Return K314LS 1/2" 9 scfm 4-Way, 3-Position Hand Lever, Spring Return M512LR 1/4" 41 scfm 4-Way, 3-Position Rotary Lever, Manual Return M513LR 3/8" 65 scfm 4-Way, 3-Position Rotary Lever, Manual Return M514LR 1/2" 85 scfm 4-Way, 3-Position Rotary Lever, Manual Return

Accessories-Installation of Reversible Models 85