Vent Easyfit Vent Standard Vent Light Vent Thermal Vent Kerb Vent Premier Kerb

Vents Vent Easyfit Vent Standard Vent Light Vent Thermal Vent Kerb Vent Premier Kerb

16 & 25mm VENT EASYFIT Polycarbonate White & Brown WELDED VENT DIMENSIONS PROFILE OF ASSEMBLY 103 Frame 3 is the opening part and hinges on frame 2 Gasket is inserted between frame 1&2 and forms thermal break Frame 2 mounts flush onto polycarbonate outside Frame 1 mounts on inside & protrudes through roof

16 & 25mm Polycarbonate White & Brown VENT EASYFIT TECHNICAL SPECIFICATIONS Size Material Opening options Finish Minimum roof pitch 505mm (w) x 674mm (h) welded aluminium manual or electric white, brown or dual colour 15 PRODUCT SUMMARY 3 piece aluminium trouble free roof vent. For 16mm & 25mm polycarbonate glazing. Supplied with everything required to fit the vent into an existing conservatory i.e. template, silicon, gasket, all fastenings, chrome spindle (crank handle optional extra). Automatic wax opener classic can be used with Vent Easyfit. RVE-16-B RVE-16-W RVE-16-DU RVE-25-B RVE-25-W RVE-25-DU PRODUCT CODES 16mm Brown Vent Easyfit 16mm White Vent Easyfit 16mm Dual Colour Vent Easyfit 25mm Brown Vent Easyfit 25mm White Vent Easyfit 25mm Dual Colour Vent Easyfit We offer powder coating, any colour, as a special order. NO ONE OPENS MORE VENTS tel 01202 744958, fax 01202 733026 email info@vent.co.uk website www.vent.co.uk Units 16c & 16f, Chalwyn Industrial Estate, Poole BH12 4PE 104

6.4-29mm VENT STANDARD Polycarbonate and Glass Any RAL colour WELDED VENT WIDTH?mm 75mm DIMENSIONS 60mm 110mm 35mm 80mm LENGTH (WITHOUT TAILPIECE) 70mm 105 TAILPIECE OPTIONS Top tailpiece option 50-200mm Bottom tailpiece option 50-200mm

6.4-29mm Polycarbonate and Glass Any RAL colour VENT STANDARD TECHNICAL SPECIFICATIONS Size Glazing size Material Opening options Finish Minimum roof pitch Extras available Purpose made aluminium welded roof vent 6.4mm-29mm glazing. An aluminium roof vent that will fit any size rafter or glazing bar and any thickness of glass or polycarbonate up to 26mm in lid. Supplied in white or brown powder coat finish (or mill) as standard. This vent can be powder coated to any BS or RAL colour Tailpiece option replaces the need for glass above the vent so lead flashing can be brought down straight on to the tailpiece. B bespoke size - the vent width is the same as the glass below any glass or polycarbonate thickness can be catered for between 6.4mm to 29mm welded aluminium spindle or actuator white 9910, Van Dyke Brown BS 08B29 15 1. 50mm-200mm top and bottom tail piece options - replaces the glass above and/or below the vent so lead flashing or capping can be brought down straight on to the vent 2. This vent can be powder coated to any BS or RAL colour PRODUCT SUMMARY GLAZING SIZE CALCULATIONS Glass Below Calculation A C 50mm to 200mm tailpiece To calculate the length 'C': deduct 'A' (Vent length + any size tail ) from 'B' (total panel length) PRODUCT CODES RVS-(INSERT GLASS THICKNESS)-B RVS-(INSERT GLASS THICKNESS)-W RVS-(INSERT GLASS THICKNESS)-M RVS-(INSERT GLASS THICKNESS)-R Glass Above & Below Calculation B D A C To establish the length 'C': deduct 'D' (panel above vent) and 'A' (vent length) from 'B' (total panel length) -165mm Brown Vent Standard White Vent Standard Mill Vent Standard Special colour Vent Standard UPGRADE available 50mm-200mm tail piece options Any BS or RAL colour available Internal Lid Glass Size Calculation -155mm To calculate the size of the glass for the vent lid, deduct 155mm from the width and 165mm from the length not including any tailpiece NO ONE OPENS MORE VENTS tel 01202 744958, fax 01202 733026 email info@vent.co.uk website www.vent.co.uk Units 16c & 16f, Chalwyn Industrial Estate, Poole BH12 4PE

16,24,32,35,40mm VENT LIGHT Polycarbonate and Glass White, Brown, Light Oak MECHANICAL VENT WIDTH 25mm LENGTH 25mm DIMENSIONS 36mm 66mm 105mm 70mm 85mm 85mm 107 glazing bar vent body with lid removed glazing bar

16,24,32,35,40mm Polycarbonate and Glass White, Brown, Light Oak VENT LIGHT TECHNICAL SPECIFICATIONS Size Glazing size Material Opening options Finish Minimum roof pitch Extras available PRODUCT SUMMARY Slimline Aluminium & PVCu Clad Roofvent for 16mm, 24/25mm, 35mm and 40mm glazing Vent LIGHT Roofvents are individually custom made to fit into the glazing bars on your roof, maintaining structural integrity. Glazing connector profiles on the top and bottom of the frame accept the roof glazing material or alternatively the top can be pushed into the wallplate or ridge aperture. The frame is factory prepared, mechanically fixed and sealed ready for site installation. The roof vent lid is simply B PRODUCT CODES RVL-(INSERT GLASS THICKNESS)-B RVL-(INSERT GLASS THICKNESS)-W RVL-(INSERT GLASS THICKNESS)-LO bespoke size - the vent width is the same as the glass below 16mm, 24mm (glass), 25mm (polycarbonate), 32mm, 35mm or 40mm. mechanically jointed aluminium spindle or actuator white 9010, brown 8019, light oak (not available in 32mm sizes and above) 5 dual colour available GLAZING SIZE CALCULATIONS Glass Below Calculation A C To calculate the length 'C': deduct 'A' (vent length) from 'B' (total panel length) Then deduct a further 15mm Note: Sheet end closer not included Glass Above & Below Calculation B glazed on site with gasket and silicone. Slimline aluminium and PVCu thermal clad roof vent Powder coated in white or brown as standard Detachable lid for access and ease of installation Minimum roof pitch 5 Roof vent accommodates 16mm, 24/25mm, 35mm and 40mm glazing Electric openers and accessories available Easy to fix and install on site Competitively priced D A C To establish the length 'C': deduct 'D' (panel above vent) and 'A' (vent length) from 'B' (total panel length) then deduct a further 30mm -110mm -165mm Internal Glass Size Calculation -110mm -155mm To calculate the size of the glazing to fit the 'lid' of the roof vent. Deduct 110mm from the width and 110mm from the length of the OVERALL ROOF VENT SIZE to obtain glazing dimension for the lid Brown Vent Light White Vent Light Light oak Vent Light (not available with 35mm or 40mm glazing) NO ONE OPENS MORE VENTS tel 01202 744958, fax 01202 733026 email info@vent.co.uk website www.vent.co.uk Units 16c & 16f, Chalwyn Industrial Estate, Poole BH12 4PE

16, 24/25, 32mm VENT THERMAL Polycarbonate and Glass White, Brown, Light Oak MECHANICAL VENT 115mm DIMENSIONS HINGED WIDTH 109mm 56mm 27mm LENGTH 109 110mm 85mm 26mm 25mm

16, 24/25, 32mm Polycarbonate and Glass White, Brown, Light Oak VENT THERMAL TECHNICAL SPECIFICATIONS Size Glazing size Material Opening options Finish Minimum roof pitch PRODUCT SUMMARY Aluminium thermally broken roof vent for 16mm, 24/25mm and 32mm glazing Powder coated in white, brown or light oak as standard, other RAL colours available Glazing connector profiles on the top and bottom of the frame accept the roof glazing material or alternatively the top can be pushed into the wallplate or ridge aperture. The frame is factory prepared, mechanically fixed and sealed ready for site installation. The roof vent lid is simply glazed on site with gasket and silicone. B PRODUCT CODES VT-(INSERT GLASS THICKNESS)-B VT-(INSERT GLASS THICKNESS)-W VT-(INSERT GLASS THICKNESS)-LO bespoke size - the vent width is the same as the glass below 16, 24/25 or 32mm mechanically jointed aluminium spindle or actuator white 9910, brown 8016, light oak 8003, RAL 5 GLAZING SIZE CALCULATIONS Glass Below Calculation A C To calculate the length 'C': deduct 'A' (vent length) from 'B' (total panel length) Then deduct a further 12.5mm Note: Sheet end closer not included Glass Above & Below Calculation B Structural aluminium roof vent with complete thermal properties BBA tested and approved to 300 pascals (the highest weather rating available) Minimum roof pitch 5 Electric openers and accessories available Easy to fix and install on site Competitively priced Vent THERMAL Roof vents are individually custom made to fit into the glazing bars on your roof, maintaining structural integrity. D A C To establish the length 'C': deduct 'D' (panel above vent) and 'A' (vent length) from 'B' (total panel length) then deduct a further 25mm Brown Vent Thermal White Vent Thermal Light oak Vent Thermal -100mm -165mm Internal Glass Size Calculation -100mm -155mm To calculate the size of the glazing to fit the 'lid' of the roof vent. Deduct 100mm from the width and 100mm from the length of the OVERALL ROOF VENT SIZE to obtain glazing dimension for the lid NO ONE OPENS MORE VENTS tel 01202 744958, fax 01202 733026 email info@vent.co.uk website www.vent.co.uk Units 16c & 16f, Chalwyn Industrial Estate, Poole BH12 4PE

VENT KERB Polycarbonate and Glass Any BS colour WELDED VENT WIDTH variable??mm height DIMENSIONS 35mm 12mm LENGTH 75mm 70mm 111 35mm 80mm

Polycarbonate and Glass Any BS colour VENT KERB Size Material Opening options Finish Extras available TECHNICAL SPECIFICATIONS PRODUCT SUMMARY Purpose made aluminium welded roof vent 6-29mm glazing An aluminium roof vent that will fit any size rafter or glazing bar and any thickness of glass or polycarbonate up to 26mm in lid. Supplied in white or brown powder coat finish (or mill) as standard. Other RAL colours available. RVK-6/29 PRODUCT CODES bespoke aluminium spindle or actuator white 9910, Van Dyke brown BS 08B29. this vent can be powder coated to any BS or RAL colour Kerb Vent UPGRADE available Any BS or RAL colour available NO ONE OPENS MORE VENTS tel 01202 744958, fax 01202 733026 email info@vent.co.uk website www.vent.co.uk Units 16c & 16f, Chalwyn Industrial Estate, Poole BH12 4PE 112

Single/Double/ Triple skin VENT PREMIER KERB Dome/Pyramid Any RAL colour WELDED VENT DIMENSIONS Extruded aluminium weather hood & dome frame Telescopic screw opener Extruded aluminium kerb converter frame Fixing screw (2.5 x 10 gauge) Roofing felt dressed up kerb Mastic bed Builders kerb ex 150mm x 50mm Max. daylight size (opening) = Premier Kerb size less 130mm Overall finished kerb (including felt) 113 Dome or pyramid (single, double or triple glazed) 150mm optimum height

Single/Double/ Triple skin Dome/Pyramid Any RAL colour VENT PREMIER KERB Size Material Opening options Finish Skin Shape TECHNICAL SPECIFICATIONS Vent Premier Kerb is designed to fit directly into a builder s upstand (by others). Once installed no further finishing or waterproofing of the unit is required. The Vent Premier Kerb is hinge ventilated. Robust aluminium frame units, specified for their exceptional build quality, reliability and appealing design Ideal for domestic, commercial or local authority applications Vent Premier Kerb is constructed from extruded aluminium security frame to deter vandalism rooflight size overall finished upstand RDSPD PRODUCT SUMMARY ROOF LIGHT AND DAYLIGHT SIZES daylight size Optimum upstand size: 50mm wide x 150mm high PRODUCT CODES see chart below aluminium by manual or electric openers White single, double or triple dome or pyramid Vent Premier Kerb NO ONE OPENS MORE VENTS tel 01202 744958, fax 01202 733026 email info@vent.co.uk website www.vent.co.uk Units 16c & 16f, Chalwyn Industrial Estate, Poole BH12 4PE 114 Glazing is UV protected polycarbonate with a 10-year post-forming warranty against breakage and discolouration. Glazing is fully gasketed in place and internal drainage channels in the frame ensure reliable all weather performance. Class B non fragile to ACR[M]001:2000 as a triple, double or single skin when new and fully fixed. Class 1 fire rated to BS476 pt 7, deemed AA to BS476 pt3 by the building regulations Roof light Overall finished Daylight Size kerb size (with 50mm kerb) 600 X 600 600 X 600 470 X 470 750 X 750 750 X 750 620 X 620 900 X 600 900 X 600 770 X 470 900 X 900 900 X 900 770 X 770 1050 X 1050 1050 X 1050 920 X 620 1200 X 600 1200 X 600 1070 X 470 1200 X 900 1200 X 900 1070 X 770 1200 X 1200 1200 X 1200 1070 X 1070 1800 X 1200 1800 X 1200 1670 X 1070 1800 X 1800 1800 X 1800 1670 X 1670 Measurements in mm Non-standard sizes also available

Quick Reference Guide Controllers Battery Back Ups PAGE 110vac in 24vdc out 230vac in 24vdc out 27vdc in 24vdc out 4amps 5amps 12 amps 12-18 amps 18 amps + Auto Fail Safe Volt Free Connect to Fire Panel Break Glass Sounder Remote Sounder Remote Switch Input Daily Use Rain Control Mains Fail Operation BBU Mini 5 BBU5 UPS 7 * * * * BBU6 9 * * * * BBU12 9 * * * BBU18+ 9 * * * Controllers PAGE 230V 110v 24v Manual Rain Heat Wind BMS inputs 7 Day Time Remote Switch Zonal Boiler/Fan TFRadio 21/24/42/44 15 * * * * 100DM 17 * Nimbus One 19 Group Command 21 * * Powerhouse 23 * * * * * * * * Rain Zone 1-4 25 * * * R Switch 27 * * Double Rocker 29 Standard * Upgradeable Zonal

Quick Reference Guide Chain Actuators Voltage Input Window/Skylight + Glass Nett Weight Required Opening Stroke Chain Actuators PAGE 230v 110v 24v 20kg 30kg 40kg 60kg 80kg 200mm 300mm 400mm 500mm 600mm 800mm 850mm Push Points 24v amps 110v amps 230v amps Sintesi 2000 37 9/18 250 380 1 0.8 1.3 0.65 Micro S 39 20 200 250 1 0.8 0.3 Vega 41 25 300 1 0.6 0.3 C20 43 20 240 360 1** 0.36 0.24 0.12 C30 45 30 200 380 1** 1.3 0.32 C40 47 40 100/150/200 250/300 400 500 1** 1.1 0.24 Quasar 49 30 500 1** 0.8 0.4 0.2 ACK4 51 35 100/150/200 250/300 350/400 1 2.1 0.35 Micro L 53 35 280 380 1** 1 0.45 Micro XL 55 40 420 600 835 1** 1 0.7 Master 57 36 380 1** 1.2 0.16 Supermaster 59 30 40 450 600 800 1** 2 0.8 Twinmaster C240 61 63 40 70 380 360 2 2 2 0.75 0.22 USA 2-ACK4 65 60 100/150/200 250/300 350/400 2 4.2 0.65 USA 3-ACK4 65 80 100/150/200 250/300 350/400 3 6.3 0.96 ** Synchronisation unit required for more than one actuator fitted to a single window

Window or Skylight Lid and Glass Nett Weight Required Opening Stroke Voltage Input Linear Actuators PAGE 35kg 45kg 65kg 100kg 200kg 200mm 300mm 400mm 500mm 600mm 800mm 1000mm Push ponts 24v amps 110v amps 230v amps D4 FCE 67 105/180 300 1** 0.7 Max 69 35 45 300 500 1** 0.7 D6 FCE 71 45 160/180 300 1** 0.7 0.7 Force 73 100 500 750 1000 1** 1 D20 FCE 75 60 180 225/300 500 1** 1.3 D30 FCE 77 200 180 300 400 500 1** 1.85 Ulysses 79 65 180 300 1** 1 ** Synchronisation unit required for more than one actuator fitted to a single window Window or Skylight Lid and Glass Nett Weight Required Opening Stroke Voltage Input Rack Actuators PAGE 35kg 60kg 70kg 80kg 130kg 150mm 180mm 230mm 350mm 550mm 750mm 1000mm Push ponts 24v amps 230v amps 35 65 75 Rack 81 1 1 0.1 35 65 75 Dual Rack 83 2/3 2 0.2 70 130 150 Double Rack 83 2/3 2 0.2 30* 60 80 S1 85 1 1 0.1 30* 60 80 S1 Dual 85 2 1 0.1 * Speed loading Quick Reference Guide Linear and Rack Actuators

Quick Reference Guide Vents Glass or polycarbonate thickness Roof Vents PAGE Welded Mechanical Colours 6.4mm 10mm 16mm 20mm 24mm glass/ 25mm poly 26.4mm 29mm 30mm 32mm 35mm 40mm Where to Place Vent Easyfit 103 Any Into polycarbonate Onto glazing bar Vent Standard 105 Any Vent Light 107 W,B,LO Onto glazing bar Vent Thermal 109 W,B,LO Onto glazing bar Vent Kerb 111 Any On upstand/flat roof Vent Premier Kerb 113 W,B On upstand/flat roof W: White B: Brown LO: Light Oak

Roof Vent quote/order form THIS IS: AN ORDER / A REQUEST FOR A QUOTE please delete. COMPANY NAME ADDRESS P.O. NUMBER TEL NO FAX NO DELIVERY ADDRESS If different ORDERED BY Please print VENT TYPE QUANTITY GLAZING THICKNESS please circle VENT COLOUR Vent Thermal 16mm 24/25mm 32mm white brown lightoak RAL Vent Standard 6.4mm 10mm 16mm 20mm 24/25mm 26.4mm 28/29mm white brown mill RAL Vent Light 18mm 24/25mm 32mm 35mm 40mm white brown light oak Other VENT DIMENSION Vent width: mm Vent height: mm (not including tail) Vent Standard Vent Standard top tail option: 100mm 200mm other bottom tail option: 100mm 200mm other ELECTRIC MANUAL Voltage 230v 24v Spindle Brass Chrome Other opener Actuator Controller functions required ACK4 400mm chain actuator Other actuator Manual Rain Temperature Wind Zones Battery backup Radio control Luxury crank handle Budget crank handle 1.5m Brass Quantity 1.5m Chrome Quantity 1m Quantity 1.5m Quantity 2m Quantity 1.75-3m Quantity Signed Print name Date Fax back to Vent Engineering on 01202 733026 Further copies of this form may be downloaded from our website www.vent.co.uk

Actuator/Controller quote form NAME ADDRESS TEL NO FAX NO EMAIL SIZE AND TYPE OF VENTILATORS Height Width Weight Quantity Top Hung, Open In Top Hung, Open Out Bottom Hung, Open In Bottom Hung, Open Out Side Hung, Open In Side Hung, Open Out Horizontal Centre Pivot Vertical Center Pivot Vertical Off Centre Pivot Louvre Rooflight, top hung Rooflight, bottom hung ARE THE VENTILATORS: ARE THE VENTILATORS TO OPERATE IN: Single glazed Groups All together Double glazed If they operate in groups: Polycarbonate No. of groups No. of ventilators per group IS THE SYSTEM FOR: Smoke ventilation Daily ventilation Both IS THE SYSTEM TO OPERATE VIA: Business Management System (by others) Fire Alarm System (by others) Independently DOES THE SYSTEM REQUIRE: OTHER REQUIREMENTS: Rain sensor Wind sensor 7 day timer Temperature sensor Further copies of this form may be downloaded from our website www.vent.co.uk

TERMS AND CONDITIONS In these conditions Ventec 100 Ltd is referred to as the Company and the person contracting with the Company is referred to as the Customer. All contracts made by the Customer with the Company shall be on the terms hereof and the Customer shall not be entitled to rely upon any statement (other than the terms of this Contract) whether oral or written and whether express of implied given or made by or on behalf of the Company. AVAILABILITY All delivery dates are subject to war strikes civil commotions lockouts breakdown of machinery or any other cause beyond the Company s control and also to the Customer giving to the Company all particulars necessary for delivery to be made within any stated delivery times. PRICES All prices are subject to change without notice and are exclusive of value added tax carriage and delivery charges. QUOTATIONS Any quotation given by the Company is a) To be regarded as an invitation for the Customer to make an offer and the quotation itself is not an offer by the Company and b) Subject to any fluctuation in the price to be paid by the Company for the goods import or any other duty and foreign exchange rates and also subject to the availability of the goods to the Company. c) All quotations are valid for a period of 30 days unless otherwise agreed. TERMS Payment shall be made by the Customer by the 21st day of the month following the date of invoice. If payment is not made on the due date the Company shall have the right to require payment of interest on the outstanding amount at the rate of 3% per month from the due date until the date of actual payment (whether before or after Judgement) and any discount which may have been given to the Customer will be disallowed and the full price payable in accordance with the terms of this condition. The Customer hereby agrees to reimburse the Company on a full indemnity basis all costs and expenses incurred in either the repossession of goods sold to the Customer and not paid for or in the collection of payment for goods sold and delivered to the Customer. OWNERSHIP a) The title to any goods purchased from the Company shall only pass to the Customer upon payment in full of the price thereof. b) Until such payment the Customer shall store the goods in such a way to show clearly they are the property of the Company. c) The Company reserves the right to repossess any of the goods and equipment to which it has title hereunder and for this purpose the Customer hereby grants an irrevocable right and licence to the Company its servants and agents to enter upon all or any of the Customer s premises with such transport as may be necessary during normal working hours to collect the said goods. Notwithstanding that title to the goods has not passed to the Customer by reason of the foregoing the goods and equipment shall be at the Customer s risk from the time of delivery to him or to any carrier or agent acting on his behalf. The right of the Company to recover possession of the goods from the Customer shall be in addition to all other rights the Company has against the Customer. WARRANTY a) The Company s liability in respect of any faulty goods shall be limited to damage caused to the goods by the Company and shall not extend to any defect in manufacture nor to any consequential loss or damage howsoever caused by such or any other defect. b) The Company shall not under any circumstances whatsoever be liable for any loss (which expression in this clause included injury damage or delay) or for any consequential loss arising out of any cause whatsoever relating to the goods and in particular due to any malfunctioning of or defect in or failure of any of the goods or any part thereof or any loss of the use of the goods or any part thereof. c) Any warranties or conditions statutory or otherwise whether express or implied as to the quality or fitness for the purpose of the goods are expressly excluded in so far as such exclusion is allowed at law. d) This agreement shall unless otherwise stated be governed by the laws of England. CLAIMS The Customer shall inspect the goods and equipment immediately on delivery and shall within three days of such inspection give notice in writing to the Company of any matter or thing by reason whereof it is alleged that the goods are not in accordance with this Contract. If the Customer shall fail to give notice these said goods and equipment shall be deemed to be in all respects in accordance with this Contract. RETURNS Goods supplied in accordance with Customer orders cannot be accepted for return without our written consent. If approval is given a handling charge will be made. Returned goods must be confirmed and carriage paid. GUARANTEE Our products are guaranteed for a period of 12 months from date of invoice against electrical breakdown or mechanical failure resulting from defective materials and/or workmanship providing the breakdown or failure is not due to misuse or operation under adverse conditions. Any unit proving faulty and covered by the provisions of this guarantee must be returned to our works complete carriage paid, for examination when it will be repaired or replaced at our option, stating the relevant sales invoice no. Units that have been dismantled, or cables that have been cut or removed, are exempt from this guarantee. Issue 2

Importers of: Vent Engineering Tel 01202 744958 Fax 01202 733026 Email info@vent.co.uk Web www.vent.co.uk Units 16c & 16f, Chalwyn Industrial Estate, Poole BH12 4PE