SIMONA piping systms mad of high-prformanc plastics th ultimat in chmical rsistanc Polyvinylidn fluorid () blongs to th group of highly crystallin high-prformanc thrmoplastics. rtains its high lvl of stiffnss vn within th uppr tmpratur rang. Th matrial is highly rsistant to th majority of organic and inorganic mdia, as wll as bing physiologically saf and offring th bnfits of low flaability. -EL includs lctrically conductiv particls and displays a low lvl of surfac rsistanc. 36 Industrial Piping Systms 05/2009
Th partially fluorinatd highprformanc plastic thylnchlorotrifluorothyln (E-CTFE) displays an xtrmly high dgr of chmical rsistanc, which includs th alkalin rang. In addition to its low flaability, it is physiologically saf and particularly wathrrsistant. Proprtis Excllnt chmical rsistanc Physiologically saf (in accordanc with BfR and FDA) Broad tmpratur rang Low flaability (in accordanc with DIN 4102 B1 and FM 4910) Good hydraulic proprtis du to smooth pip intrior Excptional aging rsistanc -EL In addition, lctrically conductiv E-CTFE Extrmly high chmical rsistanc Physiologically saf (in accordanc with BfR and FDA) Extrmly broad tmpratur rang Low flaability (in accordanc with DIN 4102 B1) Matrial spcifications Standards/guidlins E-CTFE Dnsity, g/cm 3 ISO 1183 1.780 1.680 Yild strss, MPa DIN EN ISO 527 55 31 Elongation at yild, % DIN EN ISO 527 8 4 Elongation at brak, % DIN EN ISO 527 30 125 Tnsil modulus of lasticity, MPa DIN EN ISO 527 1950 1650 Impact strngth, kj/m 2 DIN EN ISO 179 no brak no brak Notchd impact strngth, kj/m 2 DIN EN ISO 179 12 > 100 Ball indntation hardnss, MPa DIN EN ISO 2039-1 120 56 Shor hardnss, D ISO 868 78 74 Man cofficint of linar thrmal xpansion, K-1 DIN 53752 1.3 10-4 0.5 10-4 Thrmal conductivity, W/m K DIN 52612 0.14 0.15 Dilctric strngth, kv/ VDE 0303-21 25 Surfac rsist., Ohm DIN IEC 167 10 13 10 15 Combustibility DIN 4102 B1 B1 Physiologically saf as pr BgVV no no Chmical rsistanc according to DIN 8075 Supplmnt fulfilld fulfilld Tmpratur rang, C 30 to + 140 40 to + 150 05/2009 Industrial Piping Systms 37
Prssur pips Matrial Colour Natural Dimnsions Standard lngth: 5 m Not Othr lngths on rqust Standards ISO 10931 prssur pip SDR 41 SDR 33 SDR 21 SDR 17.6 SDR 17 SDR 11 SDR 7.4 d 16 1.9 20 1.9 25 1.9 32 2.4 40 2.4 50 3.0 63 2.0 3.0 75 2.3 3.6 90 2.8 4.3 110 3.4 5.3 125 3.9 6.0 140 4.3 6.7 160 4.9 7.7 180 5.5 200 6.2 225 6.9 250 7.7 280 8.6 315 9.7 38 Industrial Piping Systms 05/2009
Linr pips, Pr-tratd/untratd Matrial Colour Natural Dimnsions Standard lngth: 5 m Non-standard lngths on rqust Not with or without pr-tratd surfac for dirct lamination Standards ISO 10931 Linr pip, pr-tratd d 32 2.4 40 2.4 50 3.0 63 3.0 Linr pip, untratd 75 3.0 3.0 90 3.0 3.0 110 3.0 3.0 125 3.0 3.0 140 3.0 3.0 160 3.0 3.0 180 3.0 3.0 200 3.0 3.0 225 3.0 3.0 250 3.0 3.0 280 3.5 3.5 315 4.0 4.0 355 5.0 5.0 400 5.0 5.0 05/2009 Industrial Piping Systms 39
Fittings Diamtr in SDR 33 SDR 21 PN 16 fittings for IR/butt wlding Elbows 90, injctd 20 63 Elbows 45, injctd 90 225 20 225 Bnds 90, injctd, short spigots 20 63 Bnds 90, injctd 90 225 75 225 Ts, injctd 90 225 20 225 Ts with rducd branch, injctd 160/90 225/110 160/90 225/110 Stub flangs for loos flangs ISO/DIN, injctd 90 225 20 225 Stub flangs for loos flangs ANSI, injctd 25 90 Rducrs, concntric, injctd 90/63 225/200 25/20 225/200 Unions, injctd 20 63 Adaptors with thradd fmal nd Rp and NPT, injctd 20 63 Adaptors with thradd mal nd R and NPT, injctd 20 63 fittings for sockt wlding Elbows 90, 45, injctd 16 63 Ts, injctd 16 63 Stub flangs for sockt wlding for loos flangs ISO/DIN, injctd Stub flangs for sockt wlding for loos flangs ANSI, injctd 20 110 20 63 Sockts, injctd 16 63 Rducrs, concntric, injctd 25/20 63/50 End caps, injctd 16 63 Unions, injctd 16 63 Adaptors with thradd fmal nd Rp and Npt, injctd 20 63 Fittings for flang assmblis piping systms Flat gaskts (FPM) for stub flangs for sockt wlding 20 110 Profil gaskts (FPM) for stub flangs 90 315 25 225 for stub flangs for sockt wlding 16 110 Valvs for piping systms 2-way ball valv 16 90 Diaphragm valvs 20 110 Buttrfly valvs 50 315 Ball chck valv 20 63 40 Industrial Piping Systms 05/2009