MOONRING.5 & 3 MR.5/MR3 STNDRD SIZES.5" or 3" perture Ring diameters from feet to 6 feet LMPING LED - Direct & Indirect - 0/90 CRI - 700K/3000K/3500K/000K Output Options: ////Tunable White/RGB/RGB+W Dimming down to 0% FINISH Two Tone Paint Options (Select Models): Brushed luminum, White, Black, Silver, Brass, RL Classic Colors CONSTRUCTION Industrial Strength Extruded & Welded 606 luminum ETL Listed 0
PRODUCT SUBMITTL WORKSHEET SMPLE PRODUCT CODE MR.5/TS D3 SS /90/3500 0/0V/0% LENS /90/3500 0/0V/0% HT BK RL00 UNV EMB/ OS/ SB 3 5 6 7 9 0 3 3B 3C. BSE MODEL (CHOOSE ONE) MR.5 MR.5/ST MR.5/TS MR.5/TT MR3.5", inside short wall, outside short wall.5", inside short wall, outside tall wall.5", inside tall wall, outside short wall.5", inside tall wall, outside tall wall 3.0", equal wall MR.5.5".75" MR.5/ST.5".75" MR.5/TS.5".75" MR.5/TT.5" MR3 3.0". NOL SIZE (CHOOSE ONE) D D3 D D5 D6 D7 ' (") outer diameter 3' (36") outer diameter ' (") outer diameter 5' (60") outer diameter 6' (7") outer diameter 7' (") outer diameter D D0 D D D6 ' (96") outer diameter 0' (0") outer diameter ' (") outer diameter ' (6") outer diameter 6' (9") outer diameter 3. MOUNTING (CHOOSE ONE) SS CS CCS CM Standard Suspension Central xis Suspension Collared Central Suspension Ceiling Mounted (Not available with indirect lamping) Unavailable for rings D7, D, D0, D, D or D6 SS CS CCS CM. LED LMPING DIRECT (CHOOSE ONE UNDER, B, & C). OUTPUT B. CRI 3 C. CCT 3 DELIVERED 0 90 TUNE (0CRI, 700K-6500K White) RGB RGBW (0CRI, 000K White) 700K 3000K 3500K 000K WTTS (W) See pages 6-7 for complete details. Direct/Indirect lamping combinations are limited when specifying OUTPUT due to increased thermal temperatures and/or driver type limitations. See the 'Direct/Indirect LED Lamping Chart' on page and LED driver footnotes. 3 CRI/CCT options not applicable for TUNE, RGB, or RGBW lamping. SS06-.0 of
5. REMOTE DRIVER DIRECT (CHOOSE ONE) 0/0V/S 0/0V/% 0/0V/0% 5 DLI 5 DMX ECOSYS ECOSYS5 LTE 0-0V dimming down to 5% (Standard Dimming Down to 0% for TUNE lamping) 0-0V dimming down to % 0-0V premium dimming down to 0% DLI flicker-free dimming down to 0% (Not compatible with TUNE lamping) DMX flicker-free dimming down to 0% (Select for RGB and RGBW lamping) Lutron Hi-lume % EcoSystem, constant current (Not compatible with TUNE lamping) Lutron 5-Series 5% EcoSystem, constant current (Not compatible with TUNE lamping) Lutron Hi-lume % -wire TRIC dimming (0V forward-phase only), constant current If choosing GH output for the DIRECT lamping option, INDIRECT lamping is unavailable for rings D7 and above. 5 If choosing GH output for the DIRECT lamping option, INDIRECT lamping is unavailable for rings D and D6. lso not available in 37V driver models (#). 6. LENS DIRECT LENS Extra diffuse lens 7. LED LMPING INDIRECT (CHOOSE NONE OR ONE UNDER, B, & C NOT VILBLE WITH CEILING MOUNTING) N None. Choose when indirect lamping is not desired.. OUTPUT 6 B. CRI 7 C. CCT 7 0 90 TUNE (0CRI, 700K-6500K White) RGB RGBW (0CRI, 000K White) 6 Direct/Indirect lamping combinations are limited when specifying GH OUTPUT due to increased thermal temperatures and/or driver type limitations. See the 'Direct/Indirect LED Lamping Chart' on page and LED driver footnotes. 7 CRI/CCT options not applicable for RGB lamping. 700K 3000K 3500K 000K DELIVERED WTTS (W) See pages 6-7 for complete details.. REMOTE DRIVER INDIRECT (CHOOSE ONE NOT VILBLE WITH CEILING MOUNTING) N 0/0V/S 0/0V/% 0/0V/0% 9 DLI 9 DMX ECOSYS ECOSYS5 LTE None. Choose when indirect lamping is not desired. 0-0V dimming down to 5% (Standard Dimming Down to 0% for TUNE lamping) 0-0V dimming down to % 0-0V premium dimming down to 0% DLI flicker-free dimming down to 0% (Not compatible with TUNE lamping) DMX flicker-free dimming down to 0% (Select for RGB and RGBW lamping) Lutron Hi-lume % EcoSystem, constant current (Not compatible with TUNE lamping) Lutron 5-Series 5% EcoSystem, constant current (Not compatible with TUNE lamping) Lutron Hi-lume % -wire TRIC dimming (0V forward-phase only), constant current (Not compatible with TUNE lamping) If choosing output for the DIRECT lamping option, INDIRECT lamping is unavailable for rings D7 and above. 9 If choosing output for the DIRECT lamping option, INDIRECT lamping is unavailable for rings D and D6. lso not available in 37V driver models (#). 9. LENS INDIRECT (CHOOSE ONE) N LENS HT 0 None. Choose when indirect lamping is not desired. Fixture will be supplied with an aluminum cover in place of a lens to match the exterior finish. Extra diffuse lens High transmission, near-clear lens 0 High transmission lens increases lumen output by ~%, but LED chip is visible. Recommended only when top-side of fixture is not directly visible. SS06-.0 3 of
MR.5 & MR3 MR.5/ST & TS MR.5/TT B B 0. FINISH SURFCE () (CHOOSE ONE) BL BK BRS SV WH WH/M RL Brushed luminum Black Powder Coat Brass Metallic Powder Coat Silver Powder Coat White Powder Coat White ntimicrobial Powder Coat (for healthcare environments) Specify RL Classic Color code (ex: RL3003) ralcolorchart.com/ral-classic. FINISH SURFCE (B) (CHOOSE ONE - NOT PPLICBLE FOR MR.5, MR.5/TT, ND MR3 BSE MODELS) BL BK BRS SV WH WH/M RL Brushed luminum Black Powder Coat Brass Metallic Powder Coat Silver Powder Coat White Powder Coat White ntimicrobial Powder Coat (for healthcare environments) Specify RL Classic Color code (ex: RL3003) ralcolorchart.com/ral-classic. VOLTGE (CHOOSE ONE) UNV 37 Universal Voltage (0VC-77VC) 37 Volt (Driver options may be limited) 3. DDITIONL OPTIONS (OPTIONL CHOOSE ONE UNDER, B, & C, IF DESIRED). EMERGENCY OPTIONS EMB/ EMC/ Consult LW for more details. Emergency Battery (indicate quantity each battery powers linear feet) Emergency Circuit (indicate quantity of linear foot section to be illuminated by emergency circuit) B. SENSOR OPTIONS (COMPTIBLE ONLY WITH 0-0V DRIVERS INDICTE QUNTITY IF DESIRED, OTHERWISE IT WILL UTOMTICLLY BE CLCULTED) ENLGHT/ OS/ PH/ Enlighted remote smart sensor (occupancy, daylight, networking, and more) 0-0V remote occupancy sensor 0-0V remote photocell/daylight sensor Enlighted Gateway and Energy Manager (by others) plus programming required. Learn more at enlightedinc.com. C. DDITIONL OPTIONS (NOT PPLICBLE FOR CEILING MOUNT) COMBO SB Combination.5" canopy at power feed locations to accommodate both power cord & suspension mount hardware. Seismic Bracing SS06-.0 of
MECHNICL DIGRMS MR.5 Inside Short Wall Outside Short Wall MR.5/ST Inside Short Wall Outside Tall Wall MR.5/TS Inside Tall Wall Outside Short Wall MR.5/TT Inside Tall Wall Outside Tall Wall.75".75".75".5".5".5".5" MR3 Inside Wall () Outside Wall () 3.0" SS06-.0 5 of
MOUNTING OPTIONS Plan View Standard Suspension (SS) ().5" white canopy per power feed location () bullet mount () ' aircraft cable and () " white canopy (for use with T-bar mounting) per suspension point Plan View Central Collared Suspension (CCS) () 5" white central axis canopy and () 5" collared ring (color matches specified body finish) that all aircraft cables and power feeds route through. Elevation View Elevation View Collar Detail Central xis Suspension (CS) () 5" white central axis canopy per fixture that all aircraft cables/power feeds route into, as shown. Eye Bolt (By Others) Gripper w/hook -Cable Clamp Seismic Bracing (SB) dd-on hardware includes cable gripper with hook, -cable clamp and specified length of aircraft cable per suspension point. Plan View ircraft Cable Elevation View 0. 7 " Ceiling Mount (CM) Ceiling mount is for horizontal, ceiling mounting only. The fixture is not compatible with indirect lamping or vertical surface mounting (i.e. on a wall). Three ceiling-mount brackets per fixture. Surface Mount hardware adds 0.7" height to all options, as shown. Combo Canopy (COMBO) Choose option COMBO to specify.5" canopies at feed locations with power feed and aircraft cable suspension mounting. Canopy finish is always white. Contact LW for alternate colors. SS06-.0 6 of
PERFORMNCE & MOUNTING DETILS MR.5 3 RING DIMETER D (MR.5) D3 (MR.5) D (MR.5) D5 (MR.5) OUTPUT TYPE direct indirect 500 650 50 500 3000 3350 500 5050 50 55 3375 3750 500 5050 6750 7575 3000 3350 500 5050 6000 6750 9000 000 3750 00 5600 6300 7500 00 50 65 WTTS (W) 35 70 7 9 70 0 7/59 9/ 6 3 6 5 0 7 0 6 7/9 / 9 96 6 9 73 6 97 9 5 90 0/6 0/5 33 66 5 6 9 3 366 3/57 6/3 6 336 POWER DROPS (Standard Driver) 6 / / REMOTE DRIVER BOXES 5 (Standard Driver) 6 / / SUSPENSION POINTS FIXTURE SECTIONS PPROX. WEIGHT (LBS) CENTRL XIS, COLLRED OR CEILING 3 x Ring.5 YES 3 x Ring.75 YES 3 x Ring 5 YES 3 x Ring 3.75 YES 3 Performance calculations are based on LM-79 test of MX output at 0 CRI and 000K.,, and GH calculations are extrapolated values. Power Drop refers to the total quantity of canopies dropping low voltage power to the fixture. Each canopy may have one or multiple wire feeds supplying power to the fixture. 5 One or more drivers may be enclosed in each Remote Driver Box. See your final drawing/submittal for details. 6 pplies to 0/0V/S drivers (or DMX for ). For additional info on other driver models see your final drawing/submittal. SS06-.0 7 of
PERFORMNCE & MOUNTING DETILS MR.5 3 RING DIMETER D6 (MR.5) D7 (MR.5) D (MR.5) D0 (MR.5) OUTPUT TYPE direct indirect 500 5050 6750 7575 9000 000 3500 550 550 5900 7900 50 0500 00 5750 7700 6000 675 9000 000 000 375 000 000 7500 5 50 65 5000 650 500 550 WTTS (W) 70 0 0 0 7 9 0 0 50/9 300/3 0 0 6 9 5 7 3 57 5 7/0 3/0 3 6 93 6 7 9 96 39 95 590 0/56 0/5 70 50 7 3 5 370 6 9 369 73 0/3 0/6 33 66 POWER DROPS (Standard Driver) 6 / / / / REMOTE DRIVER BOXES 5 (Standard Driver) 6 3 6 / / / / SUSPENSION POINTS FIXTURE SECTIONS PPROX. WEIGHT (LBS) CENTRL XIS, COLLRED OR CEILING 3 x Ring 37.5 NO x Joined x Joined x Joined 0.75 NO 50 NO 6.5 NO 3 Performance calculations are based on LM-79 test of MX output at 0 CRI and 000K.,, and GH calculations are extrapolated values. Power Drop refers to the total quantity of canopies dropping low voltage power to the fixture. Each canopy may have one or multiple wire feeds supplying power to the fixture. 5 One or more drivers may be enclosed in each Remote Driver Box. See your final drawing/submittal for details. 6 pplies to 0/0V/S drivers (or DMX for ). For additional info on other driver models see your final drawing/submittal. SS06-.0 of
PERFORMNCE & MOUNTING DETILS MR.5 (CONT.) 3 RING DIMETER OUTPUT TYPE direct indirect WTTS (W) POWER DROPS (Standard Driver) 6 REMOTE DRIVER BOXES 5 (Standard Driver) 6 SUSPENSION POINTS FIXTURE SECTIONS PPROX. WEIGHT (LBS) CENTRL XIS, COLLRED OR CEILING D (MR.5) D (MR.5) D6 (MR.5) 9000 000 3500 550 000 000 7000 30300 0500 00 5750 7700 000 3575 3500 35350 000 3500 000 000 000 7000 36000 000 0 0 96 59 63 36 59 5 36 69 5 036 3/ 696/96 7 9 37 9 596 397 79 595 90 0/5 0/0 5 0 / / / / / / / / x Joined x Joined x Joined 75 NO 7.5 NO 00 NO 3 Performance calculations are based on LM-79 test of MX output at 0 CRI and 000K.,, and GH calculations are extrapolated values. Power Drop refers to the total quantity of canopies dropping low voltage power to the fixture. Each canopy may have one or multiple wire feeds supplying power to the fixture. 5 One or more drivers may be enclosed in each Remote Driver Box. See your final drawing/submittal for details. 6 pplies to 0/0V/S drivers (or DMX for ). For additional info on other driver models see your final drawing/submittal. SS06-.0 9 of
PERFORMNCE & MOUNTING DETILS MR3 3 RING DIMETER D D3 D D5 OUTPUT TYPE direct indirect 350 650 3550 3975 75 5300 700 000 3550 3975 5300 5950 700 7950 065 95 75 5300 700 7950 950 065 00 595 5900 665 900 9950 00 375 7700 9900 WTTS (W) 35 70 7 9 70 0 7/59 9/ 6 3 6 5 0 7 0 6 7/9 / 9 96 6 9 73 6 97 9 5 90 0/6 0/5 33 66 5 6 9 3 366 3/57 6/3 6 336 POWER DROPS (Standard Driver) 6 / / REMOTE DRIVER BOXES 5 (Standard Driver) 6 / / SUSPENSION POINTS FIXTURE SECTIONS PPROX. WEIGHT (LBS) CENTRL XIS, COLLRED OR CEILING 3 x Ring 3.75 YES 3 x Ring 0.75 YES 3 x Ring 7.5 YES 3 x Ring 35 YES 3 Performance calculations are based on LM-79 test of MX output at 0 CRI and 000K.,, and GH calculations are extrapolated values. Power Drop refers to the total quantity of canopies dropping low voltage power to the fixture. Each canopy may have one or multiple wire feeds supplying power to the fixture. 5 One or more drivers may be enclosed in each Remote Driver Box. See your final drawing/submittal for details. 6 pplies to 0/0V/S drivers (or DMX for ). For additional info on other driver models see your final drawing/submittal. SS06-.0 0 of
PERFORMNCE & MOUNTING DETILS MR.5 3 RING DIMETER D6 D7 D D0 OUTPUT TYPE direct indirect 700 7950 065 95 00 595 300 3900 300 975 00 395 6550 575 00 750 950 0600 00 5900 900 5 350 350 00 350 7700 9900 3600 6550 35500 3900 WTTS (W) 70 0 0 0 7 9 0 0 50/9 300/3 0 0 6 9 5 7 3 57 5 7/0 3/0 3 6 93 6 7 9 96 39 95 590 0/56 0/5 70 50 7 3 5 370 6 9 369 73 0/3 0/6 33 66 POWER DROPS (Standard Driver) 6 / / / / REMOTE DRIVER BOXES 5 (Standard Driver) 6 3 6 / / / / SUSPENSION POINTS FIXTURE SECTIONS PPROX. WEIGHT (LBS) CENTRL XIS, COLLRED OR CEILING 3 x Ring.5 NO x Joined x Joined x Joined.75 NO 55 NO 6.75 NO 3 Performance calculations are based on LM-79 test of MX output at 0 CRI and 000K.,, and GH calculations are extrapolated values. Power Drop refers to the total quantity of canopies dropping low voltage power to the fixture. Each canopy may have one or multiple wire feeds supplying power to the fixture. 5 One or more drivers may be enclosed in each Remote Driver Box. See your final drawing/submittal for details. 6 pplies to 0/0V/S drivers (or DMX for ). For additional info on other driver models see your final drawing/submittal. SS06-.0 of
PERFORMNCE & MOUNTING DETILS MR.5 (CONT.) 3 RING DIMETER OUTPUT TYPE direct indirect WTTS (W) POWER DROPS (Standard Driver) 6 REMOTE DRIVER BOXES 5 (Standard Driver) 6 SUSPENSION POINTS FIXTURE SECTIONS PPROX. WEIGHT (LBS) CENTRL XIS, COLLRED OR CEILING D D D6 00 5900 300 350 350 350 500 7775 6550 550 00 750 3300 3750 9600 5575 900 00 350 35 3700 75 56700 63700 0 0 96 59 63 36 59 5 36 69 5 036 3/ 696/96 7 9 37 9 596 397 79 595 90 0/5 0/0 5 0 / / / / / / / / x Joined x Joined x Joined.5 NO 96.5 NO 0 NO 3 Performance calculations are based on LM-79 test of MX output at 0 CRI and 000K.,, and GH calculations are extrapolated values. Power Drop refers to the total quantity of canopies dropping low voltage power to the fixture. Each canopy may have one or multiple wire feeds supplying power to the fixture. 5 One or more drivers may be enclosed in each Remote Driver Box. See your final drawing/submittal for details. 6 pplies to 0/0V/S drivers (or DMX for ). For additional info on other driver models see your final drawing/submittal. SS06-.0 of
DIRECT/INDIRECT LED LMPING CHRT Due to high thermal conditions, Direct & Indirect Lamping combinations are limited to the options below. dditional lamping combinations may be limited to the driver specified. INDIRECT LMPING DIRECT LMPING NONE RGB RGBW TUNE ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü RGB ü ü ü ü ü ü RGBW ü ü ü ü ü ü TUNE ü ü ü ü ü ü HOW TO CLCULTE VOLTGE DROP? Your MOONRING may be powered with more than x Class LED driver. Let's use the White LED, 33VDC chart below as an example.. Determine Load Size of Each Circuit a. Open the driver enclosure and you'll see a silver sticker that indicates the Power (Wattage). b. Let's say the load is 5W. Round up to the nearest load, which is 50W (we're using the White LED, 33VDC chart in this example).. Determine Distance from Driver to Load Let's assume the distance is 60 ft. 3. Determine Wire Gauge In this example, LW recommends to install 6 WG wire between the Driver and Canopy (where power drops to the ring). MOONRING VOLTGE DROP CHRT FOR REMOTE DRIVERS - WTE LED, 33VDC For best performance, ensure proper wire gauge is installed between the remote LED driver and canopy that is dropping power to your fixture. This chart only applies to MOONRING White LEDs at 33VDC. Do not use this chart to calculate voltage drop for other fixtures. WIRE GUGE 0W 0.6 30W 0.9 0W. 50W.5 60W. 70W. 0W. 90W.73 00W 3.03 WG 9 ft. 77 ft. 55 ft. 3 ft. 3 ft. ft. 3 ft. 0 ft. 7 ft. 6 WG 95 ft. 7 ft. 93 ft. 73 ft. 59 ft. 50 ft. ft. 37 ft. 3 ft. WG 35 ft. 07 ft. 53 ft. ft. 99 ft. ft. 7 ft. 63 ft. 56 ft. WG 506 ft. 33 ft. 9 ft. 97 ft. 63 ft. 3 ft. 0 ft. 06 ft. 9 ft. 0 WG 09 ft. 537 ft. 00 ft. 39 ft. 6 ft. 5 ft. 96 ft. 73 ft. 55 ft. MOONRING VOLTGE DROP CHRT FOR REMOTE DRIVERS - RGB LED, VDC For best performance, ensure proper wire gauge is installed between the remote LED driver and canopy that is dropping power to your fixture. This chart only applies to MOONRING RGB fixtures at VDC. Do not use this chart to calculate voltage drop for other fixtures. WIRE GUGE 0W 0.3 30W.5 0W.67 50W.0 60W.50 70W.9 0W 3.33 90W 3.75 00W.0 WG 59 ft. 37 ft. 5 ft. 9 ft. ft. ft. ft. 7 ft. 5 ft. 6 WG 99 ft. 63 ft. 5 ft. 35 ft. 7 ft. ft. ft. 5 ft. 3 ft. WG 63 ft. 06 ft. 77 ft. 60 ft. 9 ft. 0 ft. 3 ft. 30 ft. 6 ft. WG 6 ft. 73 ft. ft. 00 ft. ft. 69 ft. 60 ft. 5 ft. 6 ft. 0 WG ft. 0 ft. 0 ft. 6 ft. 36 ft. 5 ft. 00 ft. ft. 7 ft. SS06-.0 3 of
DDITIONL OPTIONS & SPECIFICTIONS LENS Direct: Extra diffused opal acrylic lens (LENS). Indirect: Extra diffused opal acrylic lens (LENS) OR clear high transmission lens (HT). HOUSING 00% recyclable, extruded architectural grade 606 aluminum with a 0.075" minimum wall thickness. SFETY & REGULTORY ETL Listed (U.S. & Canada). Suitable for dry locations only. Conforms to UL std. 0, Low Voltage Luminaires / Low Voltage Lighting Systems. Certified to CS std. C.#50.0:00 Ed. 3+G;G. OPERTING TEMPERTURE Luminaire should be installed and operated ONLY in dry environments where the ambient temperature ranges from - F to F ( -0 C to 50 C). Luminaire operation in environments outside the listed temperature range voids the warranty ND may damage the product or adversely impact lamp life, lumen output and color consistency. WRRNTY Limited 5-year warranty. Details: alwusa.com/warranty SENSOR OPTIONS Optional, occupancy detection (OS) and/or daylight harvesting (PS) sensor available. Or upgrade to an optional Enlighted Smart Sensor (ENLGHT) for additional capabilities. Contact LW for details. FINISH Brushed luminum White* Black Silver Brass RL Classic *For healthcare environments, a white antimicrobial finish (WH/M) is also available. SS06-.0 of