Single Ram Lifts 2-Ram Lifts 4-Ram Lifts Accessories ingro nground lifts capacity 3 t up to 5 t
Single Ram Lift P1 with X- and R-lifing head X-model with swing-arm lifting head telescopic swing arms (XT with arm extensions) automatic arm locking height ad justable pads (standard 50 mm) height approx. 100 mm no opening of the cassette for emergency lowering proce dure anti-twist device by inside welded RHS (rectangular hollow section) R-model with repair lifting head and longtitudinally adjustable sliders sliders with circumferential chamfers sliders covered with rubber pads as standard no opening of the cassette for emergency lowering procedure anti-twist device by inside welded RHS (rectangular hollow section Typ P1-35.19-X P1-35.19-XT32 P1-35.19-R.20 P1-35.19-R.22 capacity 3.500 kg 3.200 kg 3.500 kg 3.500 kg stroke 1.900 mm 1.900 mm 1.900 mm 1.900 mm Lifting time approx. 35 s 35 s 35 s 35 s Lowering time approx. 35 s 35 s 35 s 35 s Piston diameter 125 mm 125 mm 125 mm 125 mm Lifting arm clearance resp. drive-on height 100 mm 100 mm 60 mm 60 mm Lifting range 540-820 mm 540-1.130 mm 1.400-2.000 mm 1.400-2.200 mm Installation depth 2.345 mm 2.345 mm 2.345 mm 2.345 mm Power pack Poer pack installed Hydraulic oil Surface In- or above ground galvanized A classic among lifts
2-Ram Lifts P2 with R- lifting head R- model with repair lifting head and longtitudinally adjustable sliders sliders with circumferential chamfers sliders covered with rubber pads as standard synchronisation via tooth-racks made out of stainless-steel Options: sliders ad ustable from 1.400 mm to 2.200 mm sliders specially for off-road vehicles sliders in longitudinal and lateral direction flush-fit version with audible alarm (CE-stop) Accessories: rubber blocks - 80 mm high PZ.GK 12/8-set W 120 mm x L 120 mm x H 80 mm / set = 4 nos. soft blocks 45 mm hoch PZ.GK 34/4-set B 150 mm x L 340 mm x H 40 mm / set = 4 nos. soft blocks 95 mm hoch PZ.GK 34/9-set B 150 mm x L 340 mm x H 95 mm / set = 4 nos. Type capacity stroke lifting time approx. lowering time approx. ram distance piston diameter height extension range installation depth power pack hydraulic oil surface P2-35.19-R.20 (R.22) 3.500 kg 1.900 mm 35 s 35 s 1.350 mm 90 mm 60 mm 1.400-2.000 mm (2.200 mm) 2.395 mm galvanized Second to none for a single workplace with absolute perfect accessibility to the car;quick and comfortable pickup of cars in combination with optimal space utilization
2-Ram Lifts P2 with K-lifing head K-models with swing-arm lifting heads ram distance 2.300 mm double-telescopic swing-arms (3-parts) (P2-50.19-K with arms extensions) cylinders next to the vehicle height-ad ustable pads (standard 50 mm) synchronisation via tooth-racks out of stainless-steel Accessories for K- and KK-models: round rubber pads, Ø 125mm, tap 45mm, hight adjustable - standard pads, adustable 35-75 mm PZ-GT45 - pads adustable 75-150 mm PZ-GT45.150 - pads adustable 100-200 mm PZ-GT45.200 - pads adustable 150-300 mm PZ-GT45.300 Small picture: Double-telescopic arms (3-parts) pads U-shaped - pads adustable 57-132 mm PZ-GTU45.150 - pads adustable 82-182 mm PZ-GTU45.200 - pads adustable 132-282 mm PZ-GTU45.300 pads V-shaped for Sprinter and LT2 PZ-GTV45.300 adustable 156-306 mm Type P2-35.19-K30 P2-50.19-K35 P2-50.19-K50 capacity 3.000 kg 3.500 kg 5.000 kg stroke 1.900 mm 1.900 mm 1.900 mm Lifting time approx. 35 s 35 s 35 s Lowering time appr. 35 s 35 s 35 s Ram distance 2.300 mm 2.300 mm 2.300 mm Piston diameter 90 mm 125 mm 125 mm Lifting range 560-1.020 mm 560-1.140 mm 625-1.575 mm Lifting arm clearance 110 mm 110 mm 110 mm Installation depth 2.395 mm 2.395 mm 2.395 mm Power pack Hydraulic oil surface galvanized Die Lifts with telescopic swing arms made specially for off-road vehicles, mini-vans, mini-buses and transporters
2-Ram Lifts P2 with KK- lifting heads models with ram distance 1.350 mm and cylinders underneath the vehicles double-telescopic swing-arms (3-parts) (P2-50.19-K with arms extensions) cylinders next to the vehicle height-ad ustable pads (standard 50 mm) synchronisation via tooth-racks out of stainless-steel Accessorie-kits for K- and KK-models: set of pads PZ-GTSP/LT45 Sprinter and VW-LT2 consisting of: 2 x PZ-GTV45.300 set of pads PZ-GTLT45 Sprinter and VW-LT up to year 1996 consisting of: 4 x GTU45.150 set of pads DaimlerChrysler MB 100, 208, 210, 308, 408, 410 PZ-GTMB45 consisting of: 4 x GTU45.200 Tragteller PZ-GT45 und Tragteller-Satz PZ-GTSP Type P2-35.19-KK32 P2-50.19-KK35 P2-50.19-KK capacity 3.000 kg 3.500 kg 5.000 kg stroke 1.900 mm 1.900 mm 1.799 mm Lifting time approx. 35 s 35 s 35 s Lowering time appr. 35 s 35 s 35 s Ram distance 1.350 mm 1.350 mm 1.350 mm Piston diameter 90 mm 125 mm 125 mm Lfting range 560-1.020 mm 560-1.140 mm 625-1.575 mm Lifting arm clearance 110 mm 110 mm 110 mm Installation depth 2.395 mm 2.395 mm 2.395 mm Power pack Hydraulic oil Surface galvanized
2-Ram Lifts P2 with platforms Platform lifts - in different versions for Smart to transporters with long wheelbase platforms with bended edges surface-mounted version with drive-on ramps 1.000 mm long and end-stops flush-fit version with automatic end-stops synchronisation via tooth-racks out of stainless-steel Options: rigid support legs P-AMSS or telescopic legs P-AMST frames for flush-fit installation P2-ER.44/46/48 automatic floor-compensation P2-BA.44/46/48 frames flush-fit installation of lifts with floor-compensation P2-ER-BA.44/46/48 lighting with 4 lamps socket 230 V mounted in platforms air-supply integrated into platforms wheel-alignment set consisting of recess for turn-tables and sliding plates Type P2-50.19-A40.440 P2-50.19-A40.460 P2-50.19-A50.480 capacity 4.000 kg 4.000 kg 5.000 kg stroke 1.900 mm 1.900 mm 1.799 mm Lifting time approx. 35 s 35 s 35 s Lowering time approx. 35 s 35 s 35 s Ram distance 1.350 mm 1.350 mm 1.350 mm Piston diameter 125 mm 125 mm 125 mm Platform dimensions 4.400 x 600 x 100 mm 4.600 x 600 x 120 mm 4.800 x 600 x 140 mm Length incl. ramps 5.250 mm 5.450 mm 5.650 mm Installation depth 2.395 mm 2.395 mm 2.395 mm Power pack Both pictures: P2-50.19-A40.440 Hydraulic oil surface powder painted RAL 7016 / RAL 3003 quick and easy drive-on platform lifts, ideal for reception, wheel-alignment measurement and repair work
2-Ram Lifts P2-R2 with platforms and additional wheel-free lift ram-in-ram platform lift with additional wheel-free lift platforms with bended edges surface-mounted repair lifting head as wheel-free lift with 1.900 mm stroke surface-mounted version with drive-on ramps 1.000 mm long and end-stops flush-fit version with automatic end-stops synchronisation via tooth-racks out of stainless-steel Options: rigid support legs P-AMSS or telescopic legs P-AMST frames for flush-fit installation P2-R2-ER.44/46/48 automatic floor-compensation P2-R2-BA.44/46/48 frames flush-fit installation of lifts with floor-compensation P2-R2-ER-BA.44/46/48 lighting with 4 lamps socket 230 V mounted in platforms air-supply integrated into platforms wheel-alignment set consisting of recess for turn-tables and sliding plates Type P2-R2-44-R5 P2-R2-44-KK capacity platforms 3.500 kg 3.500 kg capacity wheel-free 3.500 kg 3.500 kg stroke platforms 1.900 mm 1.900 mm stroke wheel-free 1.900 mm 1.900 mm lifting range wheel-free 1.400-2000 (2.200) mm 560-1.020 mm P2-R2-44-R5 lifting time approx. 35 s 35 s lowering time approx. 35 s 35 s ram distance 1.350 mm 1.350 mm piston diameter 125/90 mm 125/90 mm platform dimensions 4.400 x 600 x 100 mm 4.400 x 600 x 120 mm length incl. ramps 5.250 mm 5.250 mm installation depth 2.395 mm 2.395 mm power pack hydraulic oil surface powder painted P2-R2-44-KK individually and combined use at one work place, the ideal reception lift
Accessories & contact & Hartgummi- und Softklötze Tragteller support legs Schiebestück für Geländewagen Sliders adustable in longitudinal and lateral direction automatic floor-compensation Einfassungsrahmen Deckeneinbau mit Getriebeumlenkung Trouser-cassette pitlift GmbH Krebspfad 22 75177 Pforzheim Phone: + 49(0)7231-5893756 Fax: + 49(0)7231-5893758 Mobile: + 49(0)151-23017818 E-Mail: info@pitlift-gmbh.de Internet: www.pitlift-gmbh.de