4 1/8 105mm DIRECT 1 15/16 49mm L3VI-SUR-SYS DR OP X Article # Mounting Distribution Diffuser Length Angle Voltage Linear Spot x Qty Electrical Finishes Accessories Type Couplers / Lighting Control Product Mounting Type Distribution Diffuser Length Angle Couplers Voltage Inserts L3VI-SUR-SYS CE - Ceiling DR -Direct OP - Opal State desired (If required) 120V Linear Spot (x please specify quantity) Vision Surface WU - Wall Uplight length SA - Ceiling to ceiling 90 277V Spot 1 (33 / 47 / 65 ) Non-adjustable WD - Wall Downlight CA - Custom angle L306 - S11-1 x 6.5W 2700W (Specify required angle) 347V L406 - S12-1 x 6.5W 3000W (Optional) L406-3500K (Upon request) S13-1 x 6.5W 4000W Fluorescent S1 -T5SO1lamp H1 -T5 HO 1 lamp Electrical Options Finishes - (see page 5) Fluorescent Please specify profile/ end cap DP - Phase dimming Non-Dimming 00 Natural Anodized Aluminum 13 Mysterious Gray DV - 0-10V dimming SO - Standard Output 01 Sparkling Silver 14 Twilight DL - Lutron Hi-Lume A Series HO - High Output 02 Black Velvet 15 Lost Dream Dimming 03 Crystal White 16 Purple Sky EM - Emergency (Supplied by others) DIM1-0-10V dimming 04 Creamy 17 Fresh Oh Other: please specify DIME - Lutron Eco System (10%) 05 Hampton Bay 18 Funky P. DIME3 - Lutron Eco System 3 Wire (10%) 06 Lagoon 19 Kissing Aphrodite DIM3D - Lutron Hi-Lume 3D (1%) 07 Urban Forest 20 Poseidon's Paradise DIM3D3 - Lutron Hi-Lume 3 Wire (1%) 08 In the Army 21 Blue Sky DIMEH - Lutron Eco System H series (1%) 09 Rusty Angel 22 Spring Green 10 Rusty Rush 23 Mellow Yellow EM - Emergency 11 Milk & Chocolate 24 Golden Heart Other: please specify 12 Fade to Gray 25 Gun Metal For unique customized profiles please include a layout drawing or description below; * Include detailed information such as distance between linear lamps, spots and aluminum caps. ** Zaneen will supply submittal drawing for approval once a Purchase Order is received. Spot 1 (33 / 47 / 65 ) Non-adjustable S21-2 x 6.5W 2700W S22-2 x 6.5W 3000W S23-2 x 6.5W 4000W Wired Lighting Control DOS - Daylight & Occupancy Sensor Profile Layout Suggestions Available for International specifications by adding 'INT' at the end of the existing Model #. International spec sheets are available upon request. For assistance to write your custom specification, email your inquiry to: specification@zaneen.com. You will receive a response within 1-2 business days. Page 1 of 8
Type Surface (Non-IC Type) Ceiling or Wall (uplight or downlight) mounted Rated for Dry or Damp locations (IP20) Approval Certified by C.S.A. for North American Standards Emission Direct. Aluminum caps offered to customize the location of the spot light. Efficiency Acrylic diffuser (snap-in) lens 32% PROFILE Minimum spacing between the spots is 300mm (11 13/16 ) for Spot 1 and 350mm (13 3/4") with Spot 2 both with integral power supplies. Lamp Combination For specific lamp combinations or configurations, please specify the overall length and attach a sketch or drawing of the intended configuration. Zaneen will supply submittal drawings for approval once an order is received. ELECTRICAL Measurements w.49mm (1 15/16") x ht. 105mm (4 1/8") Housing Anodized extruded aluminum profile up to 8-0 long. Profiles are joined with a coupler to ensure uniform appearance and easy installation. Extruded aluminum offers high reflective surface and excellent heat dissipation. Corners 100% homogeneous appearance. 90 degree and custom angles (45-180 degree) are available. Corners are created with mitered cut in lens and aluminum. End Cap has two visible screws. Finishes Standard; Natural anodized aluminum Optional; 24 colors offered using premium powder coated finish. Profile and end cap can be specified in different finishes. Wall Bracket If required, aluminum wall brackets are located approximately every 4ft-5ft. Fasteners and wall anchors are supplied by others. Mounting Holes Keyholes are drilled at the factory. Mounting hardware are supplied and installed by others. When using wall fastening spacer or key hole milling, fixture must be specified as up light or down light. INSERTS Linear (6.2W/ 880 lm/ft) (6.2W/ 902 lm/ft) 3500K (Upon request) (LM 79-80) inserts are offered in lenghts as stated in page 3. Zaneen will finalize the actual profile length after calculating the inserts required. Fluorescent Available Configurations 1 lamp overlap T5 SO: 21W, 28W, 35W / T5 HO: 39W, 54W Emergency 1 lamp overlap T5 SO: 21W, 28W, 35W / T5 HO: 39W, 54W Spot 1 x 6.5W Spot (2700K, 640lm /, 660lm /, 710lm) Offered in 3 reflector choices (33, 47 and 65 ) also 25 color options for lamp ring. 2 x 6.5W Spot (2700K, 1280lm/, 1320lm/, 1420lm) Offered in 3 reflector choices (33, 47 and 65 ) also 25 color options for lamp ring. Luminaires are pre-wired with a factory installed branch circuit wiring and quick-release connectors. Through wiring is used to connect the luminaires. BX Cable is connected directly into the fixture. Junction cover plate is available upon request. Power Feed 22mm diameter hole located on top of the profile. If a different locations is required, please specify. Driver Remote driver must be installed into a metal enclosure (supplied by others). Maximum distance between the power supply and the last fixture on the circuit is 30' using a 18-gauge wire. For more than 30', the gauge of the wire must be determined by a certified professional. The length of the fixture specified must be considered within the maximum distance of 30'. Provisions must be made on site for accessibility to the power supplies. *Electronic Class II driver, 120V/ 277V/ 347V(optional). Dimming driver 0-10V (10-100%) Lutron Hi-Lume A type dimming Emergency Inverter Compatible To be installed remotely but provided by others, can be located up to 250 away from the fixture. Emergency Circuit Wiring Upon request. Fluorescent Ballast Electronic high-power factor ballast. Specify 120V, 277V, 347V. Ballast is pre-wired with leads to one end of fixture. Ballast is positioned behind the lamp insert and is fully accessible from below. 0-10V, Lutron 3-wire or Lutron digital dimming options are available. *Lutron dimming ballast is used as standard 120V/ 277V/ 347V. Emergency Ballast To be installed remotely. Only 1 emergency ballast for every 4 (flush) and/or 5 (flush or overlap) insert can be integral. Emergency Circuit Wiring Upon request. Emergency Testing Switch is installed on the side of the emergency ballast equipped fixture. WARRANTY Zaneen provides a limited warranty from date of purchase to original purchaser. Inserts : 5 year Rated for 50,000 hours at 70% lumen output (L70) Driver : 5 year Fluorescent / Ballast : 5 year Dimming Ballast : 3 year 12V Transformer : 1 year Non-Electrical Components : 1 year Page 2 of 8
INSERTS AR INSERTS Code Color Temp. (K) Wattage Voltage Lumen CRI Length Dimensions L38165-_ L38167-_ 37W 37W 5680lm 6000lm 2270mm (7'-5 3/8") 2270mm (7'-5 3/8") L38096-_ L38098-_ 33W 33W 4970lm 5250lm 1980mm (6'-5 15/16") 1980mm (6'-5 15/16") L38133-_ L38094-_ 28W 28W 120Vac* 4260lm 4500lm 1700mm (5'-6 15/16") 1700mm (5'-6 15/16") Length L38129-_ L38131-_ 23W 23W 3550lm 3750lm 1420mm (4'-7 7/8") 1420mm (4'-7 7/8") L38125-_ L38127-_ 19W 19W 2840lm 3000lm 1140mm (3'-8 7/8") 1140mm (3'-8 7/8") * driver included To complete the above codes add suffix according to the example Fluorescent Overlap Phase 0-10V ORDER-EXAMPLE: DIMMING DP DV L38207- DV Refer to page 5 for finishes 0-10V Lamp Insert Position S1 H1 Emergency Standard Output T5: 21W, 28W, 35W High Output T5: 39W, 54W Standard Output T5: 21W, 28W, 35W High Output T5: 39W, 54W 1-Lamp SPOT INSERTS Refer to page 5 Spot 1 Code Color Temp. (K) Wattage Voltage Lumen CRI Features 01-25 Reflector Opt. Dimensions L38207- _ L38208- _ L38209- _ 2700 K 3000 K 4000 K 1 x 6.5W 1 x 6.5W 1 x 6.5W * 120Vac 640lm 660lm 710lm * driver included To complete the above codes add suffix according to the example REFLECTOR DIMMING Refer to page 5...33 33...47 47...65 65 ORDER-EXAMPLE: L38207- DV-02-65 Phase 0-10V DP DV Refer to page 5 for finishes 0-10V black 65 Spot 2 Code Color Temp. (K) Wattage Voltage Lumen CRI Features 01-25 Reflector Opt. Dimensions L38210- _ L38211- _ L38212- _ 2700 K 3000 K 4000 K 2 x 6.5W 2 x 6.5W 2 x 6.5W * 120Vac 1280lm 1320lm 1420lm * driver included To complete the above codes add suffix according to the example WIRED LIGHTING CONTROL REFLECTOR DIMMING...33 33...47 47...65 65 ORDER-EXAMPLE: L38210- DV-02-65 Phase 0-10V DP DV Refer to page 5 for finishes 0-10V black 65 Wired LC Code Sensor Head Operating Temprature Max. Load Rate Time Delay Photo Cell Range DOS Fixture Mounted PIR Sensor Head 0 C - 55 C (32F - 131F) Fluorescent Ballast 800VA at 120Vac Fluorescent Ballast 1200VA at 277Vac 650W at 120Vac 30 sec to 30 min. 0-120 footcandles (13/16") 21.3mm Dimensions 50.6mm (2") 190x25x26mm / 7 ½ x 1 x 1 Power Pack 24.4mm (15/16") Page 3 of 8
ELECTRICAL OPTIONS DRIVERS* Dimmable Max. Wattage Voltage Dimensions (mm/inch) DV DP 0-10V dimming Phase dimming 100W 100W 120-277V / 24Vdc 347V (*Optional) L.318x W.102x H.50.8mm /L.12 1/2 x W.4 x H.2 DL Lutron Hi-Lume A Series 40W * Drivers will be installed remotely and have to be placed in the enclosure provided by others. 120-277V / 24Vdc L.318x W.102x H.50.8mm /L.12 1/2 x W.4 x H.2 FLUORESCENT BALLASTS Non-Dimm/Dimmable T5SO /Wattages T5HO /Wattages Voltage Dimensions (mm/inch) SO HO Standard Output non-dimm High Output non-dimm 21-28-35W --- --- 39-54W 120V-277V 347V (*Optional) INTEGRAL DIM1 DIME DIME3 DIM3D DIM3D3 DIMEH 0-10V dimming Lutron Eco System(10%) Lutron Eco System 3 wire (10%) Lutron Hi-Lume 3D (1%) Lutron Hi-Lume 3 wire (1%) Lutron Eco System H series (1%) 21-28W 54W 21-28-35W 39-54W 21-28-35W 39-54W 21-28W 39-54W 21-28W 39-54W 21-28W 39-54W 120V-277V 347V (*Optional) INTEGRAL EM Emergency 90 minutes operation 21-28-35W 39-54W 120V-277V L.571.5x W.30x H.30mm /L.22 1/4 x W.1 3/16 x H.1 3/16 COMPONENTS Refer to page 5 c 00-25 Refer to page 5 c 00-25 Aluminum Profile *Max. 8'-0" lengths Coupler Opal Diffuser *Max. 8'-0" lengths Corner Coupler - 90 Aluminum Cap Profile *Max. 8'-0" lengths Wall Fastening Spacer (includes key hole milling) *Max. 1500mm C/O End Cap Key Hole Milling *Max. 1500mm C/O Page 4 of 8
Color Choices: 00 01 02 03 04 05 06 natural anodized aluminum sparkling silver RAL9006FS black velvet RAL9005FS crystal white RAL 9016FS creamy hampton bay lagoon 07 08 09 10 11 12 13 urban forest in the army rusty angel rusty rush milk & chocolate fade to gray mysterious gray 14 15 16 17 18 19 20 twilight lost dream purple sky fresh Oh funky P. kissing aphrodite poseidon s paradise 21 22 23 24 25 blue sky spring green mellow yellow golden heart gun metal 00 Standard Finish: natural anodized aluminum 01-25 Color Finishes: additional charge ADDITIONAL NOTES Page 5 of 8
WIRING DIAGRAMS FOR AR 0-10V DIMMING RED/ 0-10V DRIVER 0-10Vdc 24Vdc + _ GRAY PURPLE BLUE *DIMMER RED *Zaneen recommends Diva 0-10V (DVTV) dimmer. * This diagram applies only to Diva 0-10V (DVTV) dimmer. + _ LIGHT ENGINE LUTRON ECO SYSTEM DIGITAL DIMMING GROUND GREEN HI-LUME A SERIES + RED _ LIGHT ENGINE GROUND E1 - PURPLE 1 LUTRON ECOSYSTEM BUS E2 - PURPLE 2 LUTRON 3-WIRE DIMMER CONTROL GREEN 3-WIRE CONNECTION DIMMER RED YELLOW OR ORANGE ORANGE DIMMING DRIVER + _ LIGHT ENGINE Page 6 of 8
WIRING DIAGRAMS FOR FLUORESCENT T5 SO AND HO 0-10V DIMMING RED/ 0-10V BALLAST 0-10Vdc 24Vdc + _ GRAY PURPLE BLUE *DIMMER RED *Zaneen recommends Diva 0-10V (DVTV) dimmer. * This diagram applies only to Diva 0-10V (DVTV) dimmer. FLUORESCENT FIXTURE LUTRON ECO SYSTEM DIGITAL DIMMING BALLAST E1 - PURPLE 1 E2 - PURPLE 2 LUTRON ECOSYSTEM BUS FLUORESCENT FIXTURE LUTRON 3-WIRE DIMMER CONTROL GREEN 3-WIRE CONNECTION DIMMER RED YELLOW OR ORANGE ORANGE DIMMING BALLAST FLUORESCENT FIXTURE Page 7 of 8
WIRING DIAGRAMS FOR LIGHTING CONTROL WIRED LIGHTING CONTROL Hot (Black) OSF10-PPW Red Line 120/277VAC 60Hz White Load Neutral (White) Integral to Fixture Page 8 of 8