- () 1. Minimum qualification for Trainers Sector name QP Code Job Role Name Cash Collector Cash Collector Cash Collector Cash Collector Minimum Educational Qualification of the Trainer TOTAL Experience (In Years) required for the Trainer Out of Total Experience, Sector Specific Experience (in years) Out of Total Experience, Teaching Experience (in years) ITI 5 5 0 Diploma 2 2 0 B.E. 1 1 0 B.Tech 1 1 0 Remarks from SSC 2. Minimum required Class room & Lab Size ( in sqft) Sector Job Role / Trade QP code NSQF Job role type Lab Size Remark exception Class room Size level Electricity Meter Reader, Billing & Manufacturing 250 Sq ft 00 Sq ft SUNAINA SAMRIDDHI FOUNDATION Page 1
- (). Minimum Qualification of Trainees 4. Prescribed Duration of the training & common norms category Theory Practical Additional Duration: Entreprene urship and Softskills Additional Duration: Digital Literacy - Not to be counted in total hours - trainee will undergo this on his/her own via online - available in English and Regional Languages at indiaskilsonline.com Training Duration (excluding Digital Literacy) Content Available Comm on Norms Categ ory ClassificationA: Regular Class& lab C: High Capex Training involving Hi capex Manufac turing / Service 65 15 40 20 240 Yes I A NA Manufac turing Technical / Non- Technical Industry visit/ojt - Not applicable (NA) Technical 108 SUNAINA SAMRIDDHI FOUNDATION Page 2
- () 5. Tools & Equipment required in Lab SSC QPCode Job Role Name NSQF Level Equipment Name Minimum number of Equipment required (per batch of 0 trainees) Unit Type Is this a mandatory Equipment to be available at the Training Center (Yes/No) Dimension/Specification/D escription of the Equipment/ ANY OTHER REMARK Double Test Lamp (Two Incandescent Lamps Of 40 Watt Each Connected In Series To Test 415 Volt Phase To Phase) sets Yes Clamp On Tester Or Clip On Meter To Test Line Current sets Yes Multi Meter To Test Continuity And Polarity Of Ct S With The Help Of 1.5 Volt Dc Cell Accuracy Test With Portable Standard Meter (Accucheck Etc. Optional) Drill M/C With Drill Bit For Mounting Energy Meter And Meter Box units Yes 1 unit no sets Yes SUNAINA SAMRIDDHI FOUNDATION Page
- () Electrician S Tool Kit Having Combination Plier, Screw Driver 8, 10, Spanner Set, Hammer, Knife, Phase Or Neon Tester, Nose Plier, Hacksaw, Measuring Tape, File Etc. 1 set Yes Cable Socket Punch Tool 1 set Yes Safety Safety Helmet 2 unit Yes Rubber Gloves 2 pairs Yes Safety Belt Or Full Body Harness 1 set Yes Spectacle Or Mask 1 set Yes Rubber Boot 1 set Yes SUNAINA SAMRIDDHI FOUNDATION Page 4
- () Ladder 1 unit Yes Chain 1 unit Yes Rope 1 unit Yes Discharge Rod 1 unit Yes Cordon Tape 1 unit Yes Caution & Do Not Operate Tags Safety/Danger Sign Boards Single Phase Energy Meter (Electronic) 1 unit Yes 1 unit Yes unit Yes SUNAINA SAMRIDDHI FOUNDATION Page 5
- () Lt Three Phase Whole Current Energy Meter (Electronic)Of Any Rating Not Above 100 A 2 unit Yes Lt Ct Energy Meter Electronic (P4W, X-/5A, X240V) Or Of Any Rating Not Above 100/5A 2 unit Yes LT Ct S Combination Of Or 4 (As Per Meter) Ofany Rating Not Above 100/5A 2 sets Yes Service Cable 1 unit Yes Load Like Set Of 100W, 200W Lamps, Heaters, Motors Water Pump Etc. 1 unit Yes SUNAINA SAMRIDDHI FOUNDATION Page 6
- () Hardware Items Like Screws, Fasteners, Clamps Etc For Fixing Meter Boxes And Cables. 1 SET Yes Energy Meter Mechanic(Three Phase) Six Digit Counter( With Or Without Decimal) unit Yes Energy Meter Mechanic(Single Phase) Six Digit Counter( With Or Without Decimal) unit Yes Prepaid Energy Meter Electronic( Three Phase) Lcd Display Prepaid Energy Meter Electronic(Single Phase) Lcd Display Spot Billing Hand Held Device With Thermal Printer unit Yes unit Yes unit Yes SUNAINA SAMRIDDHI FOUNDATION Page 7
- () Meter Reading Instrument (Mri Or Cmri) With Optical Chord For Downloading Load Reading Data Interface With Meter units Yes Torch 1 unit Yes Cutter 2 units Yes Seals 2 units Yes (*Tool / Equipment marked not mandatory are optional) SUNAINA SAMRIDDHI FOUNDATION Page 8