Tri-Pro Series. Models / Full HPF50 - (316SS) HPF40 - (WCB) Size: 1/4-4 Pressure Rating: 3000 psi 1/4-3/ psi 1-4

flo TITEE valves & controls TM Tech Bulletin Page 51A-13 3pc High Performance Fire Safe Valves Tri-Pro Series Models / Full HPF50 - (316SS) HPF40 - (WCB) Size: 1/4-4 Pressure Rating: 3000 psi 1/4-3/4 2250 psi 1-4 Models / Reduced HPS50 - (316SS) HPS40 - (WCB) Size: 1/2-4 Pressure Rating: 3000 psi 1/2-1 2250 psi 1-1/2-4 1 HPF52 (SW) 3 HPF51 (NPT) Design Features / Options Fire Safe Certified to API 607 4th Edition Tri Pro s Advantage Ability to handle extreme pressure I-SO 5211 Actuator Mounting and temperature shock Secondary Media Containment Ability to withstand higher Anti-Static Grounding Device pressure drop Weld in-place, SW / BW / Flanged Ability to handle slurries and Protected Seat Design resist abrasion and wear Two Fully Contained Body Seals Bubbletight sealing to 550 F Cap Screw Body Assembly Bubbletight sealing to 2250 psi / 3000 psi Cryogenic Service (Available) Ability to handle thermal fluid and super V-Port Control (Available) heated steam Metal Seats (Available) Superior Stem Seal Design REFINED BY DESIGN, DIFFERENT BY INTENT Tri-Pro! One Valve for Most All Applications www.flotite.com

Design Specifications and Standards of Compliance I-SO Mount Actuator Mounting, 4 Bolt Design Eliminates Torsional Stress, Actuator can be Removed while Valve is under Full Pressure Anti-static grounding devices at two locations enable electrical continuity Parallel flat stem head for positive ball position indication. 17-4 PH as standard stem material Locking Device Tab Washer prevents nut from loosening Lived Loaded Belleville Washer Maintains constant packing load Tech Bulletin Page 51B-13 Technical Specification All Tri-Pro valves are designed to meet ASME/ANSI B16.34 Class 600&900 specifications and can be certified as such upon request at order submittal. The valve design is in compliance with BS 5351, BS 5159. Threaded End Connections meet ASME/ANSI B1.20.NPT, BSPT ISO R/7, BS21. Socket Weld End Connections meet ASME/ANSI B16.11. Butt Weld End Connections meet MSS SP72. ANSI B16.25, B16.5 Figure 2 detail recommended sch.40 up to 1000 psi, sch.80 up to 2200 psi. Flanged End Connections meet ASME/ANSI Class 600, ASME/ANSI B16.10 and B16.5 MSS SP25 compliance for standard marking system All Tri-Pro Valves meet NACE MR0175 for sour gas service. Pocketed and recessed seats with secondary metal backup seal Fully Encapsulated Graphite Gaskets isolates media from atmosphere Valve Size Bolt Size Bolt Torque in-lb 1/4-3/4 M8 250 1-1 1/4 M10 450 1 1/2 M12 850 2 M14 1400 2 1/2 M16 2100 3 5/8 1800 4 3/4 2500 V-Ring Packing Rings Form a Rigid, High Cycle Stem Seal Thrust Bearing enables an Excellent Long Life Bearing Support Fully Encapsulated TFM Gaskets adds Secondary Barrier Body Precision Investment Casting, Shell/Wall ANSI B16.34 Fully encapsulated cap screws protected from outside environment 1/4-2 2 1/2 3 4 All valves are Fire Safe & certified to API 607 4th Edition. Fire Safe Designed Valves must have graphite stem packing. All valves are in compliance with API 608. Federal Spec WW-V-35C Type II valve body and end connections are high quality investment cast and solution annealed/normalized. All valves have CE marking on either metal name plate or handle sleeve. All valves are hydrostatically shell tested to 1.5 x rating All valves 100% air tested under water at 80-100 psi. Complies with API-598, BS 6755 Pt.2. Vacuum Service Suitable to 20 Micron Specially cleaned and lubricated valves can handle services of 10-3 mm of Hg (1 micron) Quality Assurance All valves are manufactured to ISO 9001 quality standards. Seat Code F Y S U P M C Seat Material Super-Tek (TFM) Super-Tek III (carbon graphite filled TFM 50% Stainless Steel filled PTFE UHMWPE PEEK Metal Cavity Filler Detail of protected seat and encapsulated body seal design. Isolates and protects both seats and seals from flow path. Helps prevent cold flow Seats & dual seals assemble into valve end caps 3-Way Diverter

BILL OF MATERIALS: ITEM NAME STAINLESS STEEL CARBON STEEL QTY 1 BODY ASTM A351 CF8M ASTM A216 WCB 1 2 CAP * ASTM A351 CF8M ASTM A216 WCB 2 3 BALL ASTM A351 CF8M ASTM A351 CF8 1 4 SEAT # TFM TFM 2 5 GASKET # TFM TFM 2 6 GASKET # Graphite Graphite 2 7 BOLT SS316 SS304 8 8 STEM 17-4PH 17-4PH 1 9 THRUST BEARING # Carbon PTFE Carbon PTFE 1 10 THRUST WASHER # 50%SS PTFE 50%SS PTFE 1 11 STEM PACKING # Graphite Graphite 1 12 PACKING FOLLOWER SS304 SS304 1 13 BELLEVILLE WASHER SS304 SS304 2 14 LOCK WASHER SS304 SS304 1 15 STEM NUT SS304 SS304 2 16 HANDLE SS304 SS304 1 17 STOPPER SS304 SS304 1 18 PLASTIC COVER Plastic Plastic 1 19 LOCKING DEVICE SS304 SS304 1 20 ANTI-STATIC SPRING SS301 SS301 2 21 ANTI-STATIC BALL SS316 SS316 2 # Parts included in the repair kits * All SS welded ends 316L 1/4-2 Tri-Pro Exploded View Threaded Tech Bulletin Page 51C-13 Threaded Socket Weld Butt Weld Flanged Ball Design Added Safety Feature All balls are provided with a 1/8 hole drilled into the stem slot of each ball to prevent excessive pressure build up in the cavity from trapped liquid when the valve is in the open position 2-1/2-4 Tri-Pro Exploded View Flo-Tite s Van Guard Stem Sealing System Flo-Tite s Van Guard Seal, state of the art stem sealing system. Incorporating a triple set of valve stem seals, this unique system eliminates the possibility of valve stem leaks in most all media applications. Improved thrust washer design allows more sealing surface effectively blocking all leak paths during rotation. O-Ring Seal - improves overall sealing performance V-Ring Packing Set expands sideways as it is compressed and pressurized blocking all air pockets. The Van-Guard stem system is energized by Belleville washers which continuously adjusts packing compression to compensate for wear, pressure, or temperature fluctuations. Note: Standard Valve is Fire Safe Design with Graphic Packing. BILL OF MATERIALS: ITEM NAME STAINLESS STEEL CARBON STEEL QTY 1 BODY ASTM A351 CF8M ASTM A216 WCB 1 2 CAP * ASTM A351 CF8M ASTM A216 WCB 2 3 BALL ASTM A351 CF8M ASTM A351 CF8 1 4 SEAT # TFM TFM 2 5 STEM 17-4PH 17-4PH 1 6 GASKET # TFM TFM 2 7 GASKET # Graphite Graphite 2 8 BOLT SS316 SS304 16 9 ANTI-STATIC BALL SS316 SS316 2 10 ANTI-STATIC SPRING SS301 SS301 2 11 THRUST BEARING # Carbon PTFE Carbon PTFE 1 12 THRUST WASHER # 50%SS PTFE 50%SS PTFE 1 13 STEM PACKING # Graphite Graphite 1 14 ANTI-EXTRUSION # 50%SS PTFE 50%SS PTFE 1 15 PACKING FOLLOWER SS304 SS304 1 16 GLAND SS304 SS304 1 17 GLAND BOLT SS304 SS304 2 18 STOP HOUSING ASTM A351 CF8 ASTM A216 WCB 1 19 HOUSING BOLT SS304 SS304 4 20 TRAVEL STOPPER SS304 Zinc Plated C.S. 1 21 SNAP RING Nickel Plated C.S. Nickel Plated C.S. 1 22 HANDLE Ductile Iron Ductile Iron 1 23 SET SCREW SS304 SS304 1 # Parts included in the repair kits Both Full Port and Standard Port Valve Parts are Interchangeable

Tech Bulletin Page 51D-13 Dimensions - Full Bore Technical Submittal Model HPF Flo-Tite, Inc. Xtra Long Butt Weld & Socket Weld Ends Are Available, Consult Factory. HPF53 (SL) HPF43 (CS) SL = CF3M/316L HPF52 (SL) HPF42 (CS) HPF51 (SS) HPF41 (CS) SIZE A NPT A BW, SW Mounting Dimensions B C C1 D E1 E2 F1 F2 G Cv Torque Weight Lbs SW 1/4 2.72 4.81 0.46 2.80 1.54 6.57 0.46 0.56 0.71 1.02 0.39 18 75 2.5 3/8 2.72 4.81 0.50 2.80 1.54 6.57 0.50 0.69 0.71 1.02 0.39 18 75 2.5 1/2 2.91 4.89 0.59 2.80 1.54 6.57 0.59 0.85 0.85 1.24 0.39 18 85 3 3/4 3.39 5.17 0.79 2.95 1.70 6.57 0.79 1.07 1.07 1.52 0.51 42 140 4 1 3.70 5.24 0.98 3.62 2.06 7.95 0.98 1.33 1.34 1.69 0.51 72 190 5 1 1/4 4.09 5.72 1.26 3.74 2.19 7.95 1.26 1.67 1.69 2.17 0.51 124 320 9 1 1/2 4.61 6.19 1.57 4.45 2.65 9.88 1.57 1.91 1.91 2.44 0.51 210 430 12 2 5.20 6.62 1.97 4.45 2.91 9.88 1.97 2.41 2.38 2.95 0.63 350 560 16 2 1/2 7.28 8.78 2.56 6.22 3.39 15.5 2.32 2.91 2.87 3.62 0.98 650 950 32 3 8.74 10.00 2.99 7.13 4.45 15.5 2.99 3.52 3.50 4.29 0.98 950 1200 45 4 13.50 17.00 3.94 9.41 5.53 22.5 3.82 4.54 4.50 5.31 1.18 1620 2150 62 SIZE d K L M P W ISO 1/4 1.65 0.28 0.53 0.25 0.47 #10-24UNC F04 3/8 1.65 0.28 0.53 0.25 0.47 #10-24UNC F04 1/2 1.65 0.28 0.53 0.25 0.47 #10-24UNC F04 3/4 1.65 0.28 0.53 0.25 0.47 #10-24UNC F04 1 1.97 0.44 0.74 0.315 0.55 1/4-20UNC F05 1 1/4 1.97 0.44 0.74 0.315 0.55 1/4-20UNC F05 1 1/2 2.76 0.53 0.88 0.374 0.63 5/16-18UNC F07 2 2.76 0.53 0.88 0.374 0.63 5/16-18UNC F07 2 1/2 CONSULT FACTORY 3 4.02 1.75 2.76 0.669 1.10 1/2-13UNC F10 4 4.92 2.03 2.91 1.024 1.34 1/2-13UNC F12 IMPORTANT: Mounting Dimensions Are for Estimating Purposes Only. Consult Factory Before Manufacturing APPLICABLE STANDARDS Body Wall Thickness ASME B16.34 NPT and SW Ends ASME B16.11 Butt Weld Ends ASME B16.25 Basic Dimensions ASME B16.34 Testing Standards ASME B16.34, API598 NACE MR-01-75 All valves are hydrostatically shell tested to 1.5 x rating. All valves 100% air tested under water at 80-100 psi. Complies with API-598, BS 6755 Pt. 2. Pressure Temperature Rating 1/4-2 Size 3-4 Size Body rating in the chart is for CF8M material. Max. WCB body rating is 1580 psi for class 600. Consult factory for Rating higher than 800 F Due to continuous development & improvement of our product range, we reserve the right to alter the dimensions & technical data included in this brochure

Flo-Tite, Inc. Dimensions - Reduced Bore Technical Submittal Tech Bulletin Page 51E-13 Model HPS Xtra Long Butt Weld & Socket Weld Ends Are Available, Consult Factory. HPS53 (SL) HPS43 (CS) SL = CF3M/316L HPS52 (SL) HPS42 (CS) HPS51 (SS) HPS41 (CS) SIZE A NPT A BW, SW B C C1 D E1 E2 F1 F2 G Cv Torque Weight Lbs SW 1/2 2.87 4.85 0.50 2.80 1.54 6.57 0.55 0.85 0.84 1.14 0.39 18 75 3 3/4 3.11 4.89 0.59 2.80 1.54 6.57 0.74 1.07 1.05 1.38 0.51 20 85 4 1 3.62 5.17 0.79 2.95 1.70 6.57 0.96 1.33 1.31 1.69 0.51 40 140 5 1 1/2 4.13 5.72 1.26 3.74 2.19 7.95 1.50 1.91 1.90 2.36 0.51 120 320 12 2 4.76 6.19 1.57 4.45 2.65 9.88 1.94 2.41 2.37 2.83 0.63 200 430 16 2 1/2 5.90 8.78 1.97 4.45 2.91 9.88 2.32 2.91 2.87 3.46 0.98 300 580 32 3 9.06 9.57 2.56 6.22 3.39 15.5 2.90 3.54 3.50 4.18 0.98 640 985 55 4 13.50 12.01 2.99 7.13 4.45 15.5 3.94 4.59 4.50 5.31 1.18 900 1250 85 APPLICABLE STANDARDS Body Wall Thickness ASME B16.34 NPT and SW Ends ASME B16.11 Butt Weld Ends ASME B16.25 Basic Dimensions ASME B16.34 Testing Standards ASME B16.34, API598 NACE MR-01-75 All valves are hydrostatically shell tested to 1.5 x rating. All valves 100% air tested under water at 80-100 psi. Complies with API-598, BS 6755 Pt. 2. Mounting Dimensions SIZE d K L M P W ISO 1/2 1.65 0.28 0.53 0.25 0.47 #10-24UNC F04 3/4 1.65 0.28 0.53 0.25 0.47 #10-24UNC F04 1 1.65 0.28 0.53 0.25 0.47 #10-24UNC F04 1 1/2 1.97 0.44 0.74 0.315 0.55 1/4-20UNC F05 2 2.76 0.53 0.88 0.374 0.63 5/16-18UNC F07 2 1/2 2.76 0.53 0.88 0.374 0.63 5/16-18UNC F07 3 CONSULT FACTORY 4 4.02 1.75 2.76 0.669 1.10 1/2-13UNC F10 IMPORTANT: Mounting Dimensions Are for Estimating Purposes Only. Consult Factory Before Manufacturing Pressure Temperature Rating 1/4-2 1/2 Size 4 Size Body rating in the chart is for CF8M material. Max. WCB body rating is 1580 psi for class 600. Consult factory for Rating higher than 800 F Due to continuous development & improvement of our product range, we reserve the right to alter the dimensions & technical data included in this brochure

Tech Bulletin Page 51F-13 Dimensions - Flanged Class 600 Technical Submittal Flo-Tite, Inc. Pressure Temperature Rating SIZE A B C C1 D E F Cv Torque in-lb 1/2 6.50 0.59 2.80 1.54 6.57 2.62 3.75 18 75 3/4 7.50 0.79 2.95 1.70 6.57 3.25 4.62 42 85 1 8.50 0.98 3.62 2.06 7.95 3.50 4.88 72 140 1 1/4 9.00 1.26 3.74 2.19 7.95 3.88 5.25 124 190 1 1/2 9.50 1.57 4.45 2.65 9.88 4.50 6.12 210 320 2 11.5 1.97 4.45 2.91 9.88 5.00 6.50 350 430 2 1/2 13.0 2.56 6.22 3.39 15.5 5.88 7.50 650 580 3 14.0 2.99 7.13 4.45 15.5 6.62 8.25 950 985 4 17.0 3.94 9.41 5.53 22.5 8.50 10.75 1620 1250 Body rating in this chart is for CF8M material. Max. WCB body rating is 1480 psi for class 600. APPLICABLE STANDARDS Body Wall Thickness ASME B16.34 NPT and SW Ends ASME B16.11 Butt Weld Ends ASME B16.25 Basic Dimensions ASME B16.34 Testing Standards ASME B16.34, API598 NACE MR-01-75 All valves are hydrostatically shell tested to 1.5 x rating. All valves 100% air tested under water at 80-100 psi. Complies with API-598, BS 6755 Pt. 2. Valves will be supplied with full cast or weld on flanges Tri-Pro - Product Identification Code for Full Valve Model Numbers MODEL SS - Full Port NPT HPF51 SW HPF52 BW HPF53 FLG HPF56 CS - Full Port NPT HPF41 SW HPF42 BW HPF43 SS - Reduced Port NPT HPS51 SW HPS52 BW HPS53 CS - Reduced Port NPT HPS41 SW HPS42 BW HPS43 Ordering Examples by Part Numbers MODEL NPT END REDUCED PORT CS BODY BODY MATERIAL BODY MATERIAL 2ND END CONNECTION SEAT 2ND END CONNECTION SEAT STEM SEAL STEM SEAL BODY SEAL BODY SEAL OPERATOR WCB SW TFM Graphite TFM Lever 2 Ball: All ball material is supplied standard as 316SS & 304SS. If different material is required please specify as special feature Stem: All stem material is supplied standard as 17-4PH. Please specify as special feature if SS316 is needed. Special Features are noted at the end of the identification number, please see special feature codes. For extended number, see Tech Bulletin page 191. Ordering Information When placing an order or requesting a quotation, please provide as many details on the application as possible such as media type, temperature, pressure, pipe size, etc. Flo-Tite is dedicated to products of high quality with continuous design improvements. All information provided is subject to change without notice. SIZE OPERATOR 316SS SS Threaded 1 TFM F TFM F TFM F Lever 1/4 8 L WCB CS Socket Weld 2 CTFM Y CTFM Y RTFM X Locking 3/8 10 Alloy 20 A2 Butt Weld 3 PTFE T PTFE T PTFE T Oval 1/2 15 O 316L SL Flanged 150 4 RPTFE R RPTFE R RPTFE R Locking 3/4 20 Flanged 300 5 50/50 S 50/50 S 50/50 S Gear S 1 25 Flanged 300 6 UHMWPE U UHMWPE U UHMWPE U Deadman U 1 1/4 32 PEEK P Graphite G Graphite G Actuator G 1 1/2 40 Cavity Filled C Bare Stem N 2 50 Metal M 2 1/2 65 SPECIAL FEATURE Media Containment HPS41 CS 2 F G F L 50 H3 SIZE 3 80 4 100

Flo-Tite, Inc. Dimensions - Actuation / Flow Data Tech Bulletin Page 51G-13 Pneumatic Actuator Dimensions shown in this drawing are for full port units based on 80 psi air to actuator, valves with standard seats, clean fluid only at ambient temperatures and pressures not to exceed 800 psi. Consult factory for additional actuator types and dimensional drawings. Tri-Pro in Control Valve Service Flo-Tite also offers modulating V-port control valves. The V-ball is characterized to meet virtually all flow requirements. See tech bulletin 120. SIZE A A Spring Return Actuator 80psi Double Acting Actuator 80psi A 600# BW, B C1 C2 NPT Actuator Actuator Flange SW C3 C D C3 C D Model Model 1/4-2.72 4.81 0.46 1.54 1.57 4.23 7.34 6.61 C-SR063.9 3.15 6.26 4.81 C-DA040 3/8-2.72 4.81 0.50 1.54 1.57 4.23 7.34 6.61 C-SR063.9 3.15 6.26 4.81 C-DA040 1/2 6.50 2.91 4.89 0.59 1.54 1.57 4.23 7.34 6.61 C-SR063.9 3.15 6.26 4.81 C-DA040 3/4 7.50 3.38 5.17 0.79 1.70 1.57 4.23 7.50 6.61 C-SR063.12 3.62 6.89 5.79 C-DA052 1 8.50 3.70 5.24 0.98 2.06 1.57 4.23 7.86 6.61 C-SR063.9 4.23 7.86 6.61 C-DA063 1 1/4 9.00 4.09 5.72 1.26 2.19 1.57 5.07 8.83 8.03 C-SR083.12 4.70 8.46 7.24 C-DA075 1 1/2 9.50 4.61 6.19 1.58 2.65 1.88 5.39 9.92 10.4 C-SR092.12 5.07 9.60 8.03 C-DA083 2 11.5 5.20 6.62 1.97 2.91 1.88 6.02 10.8 10.6 C-SR105.12 6.02 10.8 10.6 C-DA105 2 1/2 13.0 7.28 8.78 2.56 3.39 4.00 6.89 14.3 11.7 C-SR125.12 6.02 13.5 10.6 C-DA105 3 14.0 8.70 10.04 2.99 4.45 4.00 7.54 16.0 15.4 C-SR140.8 6.89 15.4 11.7 C-DA125 4 17.0 9.84 13.00 3.94 5.53 4.00 8.54 20.1 18.1 C-SR160.9 7.54 19.1 15.4 C-DA140 All figures stated above are generally accepted average breakaway torque ratings for clean wet service Torque Factors for Special Applications: 1 - increase the breakaway torque by 20% for dry gas service or demineralized water; 2 - add 10% for infrequent cycling; 3 - add 40% for slurry or light abrasive content; 4 - add 60% for metal seated valves, class V shut-off 5 - deduct 10% for high lubricity service Torque figures are for valves up to 800 psi service. For higher pressure applications consult factory. Valve torque can vary due to pressure, media and temperature. The information provided above should be considered as a guide only and must be adjusted according to experience and judgment. All Tri-Pro Valves have integrally cast mounting pad for ease of mounting actuation equipment. V-ports 15, 30, 60, 90 deg V & custom designs are available Tri-Pro in Crygenic Service The Tri-Pro series can be provided specifically for cryogenic applications.all cryogenic ball valves have extended bonnets. They offer exceptional performance under the most extreme cold working temperature conditions. See tech bulletin page 138.

True High Performance Ball Valve Technology Tech Bulletin Page 51H-13 A superior quality, rugged, and universal purpose valve for all fluids ideal for saturated or superheated steam, slurries, semi-solids and corrosive services in endless industrial, chemical, power, gas, paper and original equipment applications. Three Piece Design Offers a wide selection of pipe end connections. allows easy access to internal valve components. Swing-out center body Fully Protected Body Seals Prevents seal ruptures in high pressure or steam applications. Live-Loaded-Blow-Out-Proof Bottom Entry System Secure Body Bolting Integral Actuator Moutning Pad Captured Seats Weld-in-Place High Strength Stem Self adjust with pressure and temperature fluctuations. Blow-out proof Bottom Entry Stem, antistatic grounds help prevent accidents and injuries. Cap screws - fully encapsulated secure end caps to tapped center body. Insuring ease of foolproof body assembly every time. Also protects bolts from outside environment. Ideal for actuation, ISO-5211 bolting, actuators may be retrofitted without disturbing the pipeline. Allows for secondary containment unit to be added when necessary. Pocketed and recessed seats with secondary metal backup seal, meeting API607-4. Super-TEK TFM, 50/50, metal seats and more. Heat sink construction allows in-place welding, prevents damage to soft seat rings and eliminates the need to disassemble valve for welding. Assures safe & cost effective installation. Parallel flat stem head for positive ball position indication. High strength 17-4 PH stainless steel is provided as standard. Lockable Safety Handle Prevents valves from being opened or closed accidently. OSHA standards with locking device. Lock-out meets MATERIAL IDENTIFICATION Tri-Pro with Media Containment Units Flo-Tite s marking system follows MSS SP-25-1998 guidelines. In addition to the casted body information, all valves have metal name plates that identify all valve soft parts. Valve users worldwide will be able to contact Flo-Tite quickly for any installation or service requirements as the company website address will be on all valves. TM Flo-Tite, Inc. flo TITEE 4815 West 5th St. valves & controls Lumberton, NC 28358 P. O. Box 1293 Lumberton, NC 28359 Website: www.flotite.com The I-SO-Mount platform is ideal for the addition of our secondary containment units. Flo-Tite s media containment unit offers in-line maintenance for stem repair, protection for high temperature service, fugitive emission monitoring for early leak detection, positive displacement. It also can be used as a high tech stem extension. Tel: (910) 738-8904 Fax: (910) 738-9112 E-mail: flotite@flotite.com Due to continuous development & improvement of our product range, we reserve the right to alter the dimensions and techcal data included in this brochure

AIR CON II Pneumatic Actuators Tech Bulletin Page 154A-09 C Series Pneumatic Rack & Pinion Rotary Actuators Spring Return & Double Acting Torque Range 50 thru 28500 in-lbs Independent Travel Stop Adjustment Range of 5 o for the 90 o Rotation www.flotite.com

Features and Benefits Tech Bulletin Page 154B -09 Torque Range at 80 Psig Air Pressure: Double Acting: 115-28,500 lbf-in Spring Return: 50-16,500 lbf-in Cycle Life: up to 1 million cycles Extruded Aluminum Body with standard hard anodizing finish and polished internal surfaces Die Cast Aluminum End Caps with powder polyester painted, PTFE or nickel plated. Position Indicator with NAMUR slot for easy accessory mounting High Precision Nickle Alloy Steel Blow-out Proof Pinion for corrosion protection and fully confirms to ISO 5211 and NAMUR. Dual Opposed Rack Pistons with low friction bearings and guides for high performance, long cycle life and fast operations. Easily inverting the pistons for reversing rotation. Linear Torque Output from 0º through 90º stroke. Independent Travel Stop Adjustments of ±5º in both open and closed positions for easily exact valve alignment. High Performance Pre-loaded Springs Cartridges allow for greater safety and longer spring life. Double acting can be easily converted to spring return by adding the cartridges. Different torque requirements can also be safely achieved by changing the quantity of springs. NAMUR Solenoid Mounting Design permitting direct mounting of solenoid valves. Stainless Steel 304 Fasteners as standard High Quality Selected O-rings provides troublefree operation for wide range temperature applications. Precision Replaceable Insert including variable internal geometry configuration for customer requirement available. Optional Corrosion Protection available for body and end caps. 154B www.flotite.com

Tech Bulletin Page 154C -09 Operations Double Acting A B A B By supplying air to Port A, pressure is applied to the center chamber and forces the dual pistons outward. Linear piston force is transferred via gear racks to the pinion gear, causing the pinion to turn counterclockwise while the air is being exhausted from Port B. By supplying air to Port B, pressure is applied to the outside chamber and drives the dual pistons inward. The action causes the pinion to turn clockwise while the air is being exhausted from Port A. Spring Return A B A B By supplying air to Port A, pressure is applied to the Upon loss of air pressure, the stored energy in the center chamber, forces the dual pistons outward compressed springs forces the pistons inwards and compresses the springs in the outside producing rotary motion with exhaust air exiting at chambers and produce counterclockwise rotary. Port A. This "fail safe" position is held by spring Exhaust air exits at Port B. force until air pressure reapplied to Port A. Installation of Springs for Spring Return Actuator 5 Springs 6 Springs 7 Springs 8 Springs 9 Springs 10 Springs 11 Springs 12 Springs Even spring set is recommended for high cycle application. 154C www.flotite.com

Materials of Construction Tech Bulletin Page 154D-09 1 2 18 17 15 25 3 4 5 7 6 7 25 16 23 24 26 27 8 9 10 11 15 16 17 18 19 20 21 22 27 26 12 13 14 28 (Optional) No. Part Description Qty. Material No. Description Qty. Material 1 Indicator Cap Screw 1 Plastic / Stainless Steel 15 Spring (Cartridge) 0~12 High Alloy Spring Steel 2 Position Indicator 1 Plastic (ABS) 16 Bearing (Piston) 2 Polyoxymethylene (Delrin) 3 Pinion Snap Ring 1 Stainless Steel 300 Series 17 O-ring (Piston) 2 NBR 4 Thrust Washer 1 Stainless Steel 300 Series 18 Piston 2 Die-Casting Aluminum 5 Thrust Bearing 1 Polyoxymethylene (Delrin) 19 Plug 2 NBR 6 Body 1 Extruded Aluminum Alloy 20 O-ring (Adjust Screw) 2 NBR 7 Piston Guide 2 Polyoxymethylene (Delrin) 21 Stop Nut (Adjust Screw) 2 Stainless Steel 300 Series 8 O-ring (Pinion Top) 1 NBR 22 Adjust Screw 2 Stainless Steel 300 Series 9 Bearing (Pinion Top) 1 Polyoxymethylene (Delrin) 23 Stop Screw 2 Stainless Steel 300 Series 10 Inside Washer 1 Polyoxymethylene (Delrin) 24 Nut (Stop Screw) 2 Stainless Steel 300 Series 11 Cam 1 Alloy Steel * 25 O-ring (End Cap) 2 NBR 12 Pinion (Drive Shaft) 1 S.S. 300 Series / Nickel Plated Alloy * 26 End Cap 2 Die-Casting Aluminum 13 Bearing (Pinion Bottom) 1 Polyoxymethylene (Delrin) 27 End Cap Screw 8 Stainless Steel 300 Series 14 O-ring (Pinion Bottom) 1 NBR 28 Shaft Adapter 1 Sintered Metal * Stainless steel for model DA/SR083 and smaller only. 154D www.flotite.com

Tech Bulletin Page 154E-09 Dimensions 0.158 0.472 0.158 NAMUR PINION DETAIL K V MODEL C-DA40, DA/SR052-160 C-DA/SR190-270 V 0.79 1.18 4-M5 x 0.32 NAMUR J ØD M6 E H G F L A C B U T M 4xS 45 0.63 0.63 0.47 1/4"-NPT 0.89 0.89 0.79 1/2"-NPT 0.47 4-M5 x 0.32 4-M6 x 0.394 0.79 1/4" NAMUR 1/2" NAMUR 4 x R MODEL: C-DA/SR-270 M Unit: inch Model A B C D E F G H J K L M R S T U C-DA40 4.81 1.44 1.13 1.58 2.05 2.36 3.15 3.15 1.18 0.55 0.43 M5 x 8 M6 x 10 F03/1.417 F05/1.969 C-DA/SR052 5.79 1.18 1.63 1.58 2.56 2.58 2.83 3.62 3.15 1.18 0.55 0.43 M5 x 8 M6 x 10 F03/1.417 F05/1.969 C-DA/SR063 6.61 1.42 1.85 1.58 2.83 3.19 3.44 4.23 3.15 1.18 0.71 0.55 M6 x 10 M8 x 13 F05/1.969 F07/2.756 C-DA/SR075 7.24 1.65 2.09 1.58 3.19 3.70 3.92 4.70 3.15 1.18 0.71 0.55 M6 x 10 M8 x 13 F05/1.969 F07/2.756 C-DA/SR083 8.03 1.81 2.24 1.58 3.62 3.88 4.28 5.07 3.15 1.18 0.83 0.67 M6 x 10 M8 x 13 F05/1.969 F07/2.756 C-DA/SR092 10.31 1.97 2.30 1.58 3.86 4.37 4.60 5.39 3.15 1.18 0.83 0.67 M6 x 10 M8 x 13 F05/1.969 F07/2.756 C-DA/SR105 10.55 2.26 2.52 1.58 4.31 4.82 5.24 6.02 3.15 1.18 1.02 0.87 M8 x 13 M10 x 16 F07/2.756 F10/4.016 C-DA/SR125 11.65 2.66 2.93 2.17 5.02 5.73 6.10 6.89 3.15 1.18 1.02 0.87 M8 x 13 M10 x 16 F07/2.756 F10/4.016 C-DA/SR140 15.35 2.95 3.03 2.17 5.41 6.33 6.75 7.54 3.15 1.18 1.22 1.06 M10 x 16 M12 x 20 F10/4.016 F12/4.921 C-DA/SR160 18.03 3.43 3.43 2.17 6.22 7.24 7.76 8.54 3.15 1.18 1.22 1.06 M10 x 16 M12 x 20 F10/4.016 F12/4.921 C-DA/SR190 20.79 4.06 4.06 3.15 7.44 8.50 9.06 10.24 5.12 1,18 1.57 1.42 M16 x 25 F14/5.512 C-DA/SR210 22.20 4.45 4.45 3.15 8.27 9.27 10.04 11.22 5.12 1.18 1.57 1.42 M16 x 25 F14/5.512 C-DA/SR240 23.70 5.12 5.12 3.15 9.65 10.39 11.38 12.56 5.12 1,18 1.97 1.81 M20 x 25 F16/6.496 C-DA/SR270 27.80 5.79 5.79 3.15 10.75 11.77 12.83 14.01 5.12 1.18 1.97 1.81 M20 x 25 F16/6.496 Consult factory for C-DA32 information. 154E www.flotite.com

Technical Data Tech Bulletin Page 154F -09 Spring Return Actuators Output Torque (lbf-in) Output Air to Spring Spring Return Air Pressure (PSI) 40 50 60 70 80 90 100 Output Actuator Type Spring 0 o 90 o 0 o 90 o 0 o 90 o 0 o 90 o 0 o 90 o 0 o 90 o 0 o 90 o 90 o 0 o No. Start End Start End Start End Start End Start End Start End Start End Start End 5 55 37 77 58 55 38 6 48 24 70 46 94 78 66 45 7 39 13 61 34 90 67 120 89 77 52 C-SR52 8 53 20 84 55 113 78 140 114 87 60 9 44 8 76 44 105 67 133 104 160 132 98 67 10 68 33 98 57 126 94 153 122 109 75 11 60 21 91 46 119 84 146 113 172 140 120 82 12 83 36 112 74 139 95 166 130 131 90 5 111 75 153 116 204 137 92 61 6 98 55 138 95 191 152 242 205 111 72 7 84 35 127 73 179 133 229 187 129 85 C-SR63 8 111 52 167 114 218 169 267 220 315 269 148 97 9 154 95 206 151 255 203 304 253 166 109 10 132 75 195 133 244 186 293 236 341 286 185 121 11 184 115 234 169 283 220 330 270 203 133 12 171 97 222 152 271 204 320 254 222 145 5 141 103 197 158 270 235 128 93 6 121 74 176 128 251 208 321 280 154 112 7 101 47 155 99 232 182 303 256 179 131 C-SR75 8 133 69 211 155 284 231 352 301 418 369 205 149 9 192 129 266 206 335 278 402 347 231 168 10 174 102 246 181 318 254 386 324 451 391 256 187 11 231 157 301 231 369 301 435 369 282 205 12 213 132 284 207 353 278 419 346 308 224 5 227 157 317 244 428 364 204 140 6 196 112 285 196 400 321 508 434 244 168 7 166 67 252 151 371 279 481 395 285 196 C-SR83 8 221 103 342 237 454 355 560 466 663 572 326 224 9 313 192 426 316 534 429 638 536 367 252 10 284 152 400 276 508 391 613 500 715 605 407 280 11 373 237 483 353 588 464 691 570 448 308 12 345 198 456 316 563 428 667 536 489 336 5 322 214 450 338 612 511 304 207 6 277 148 403 269 569 449 725 612 365 248 7 231 80 355 197 526 385 685 553 426 289 C-SR92 8 319 128 484 323 646 495 799 655 947 808 487 331 9 441 260 606 436 761 599 911 755 548 372 10 399 197 566 377 723 543 874 700 1022 853 608 413 11 525 318 685 487 837 647 986 801 669 454 12 486 260 647 432 800 593 950 749 730 496 5 497 325 687 508 921 760 436 280 6 435 229 622 407 862 670 1088 908 523 336 7 374 133 559 308 805 580 1035 824 610 392 C-SR105 8 494 208 747 490 980 740 1203 974 1419 1198 697 448 9 689 400 927 656 1152 894 1370 1122 784 504 10 631 306 872 569 1100 811 1320 1041 1535 1264 871 560 11 818 487 1048 733 1270 966 1486 1191 958 616 12 764 406 997 656 1221 892 1439 1119 1045 672 154F www.flotite.com

Tech Bulletin Page 154G -09 Technical Data Spring Return Actuators Output Torque (lbf-in) Output Air to Spring Spring Return Air Pressure (PSI) 40 50 60 70 80 90 100 output Actuator Type Spring 0 o 90 o 0 o 90 o 0 o 90 o 0 o 90 o 0 o 90 o 0 o 90 o 0 o 90 o 90 o 0 o No. Start End Start End Start End Start End Start End Start End Start End Start End 5 712 453 1000 729 1358 1115 698 462 6 610 305 893 574 1263 976 1608 1340 832 555 7 509 148 787 410 1167 828 1519 1202 971 647 C-SR125 8 681 255 1071 689 1429 1072 1770 1429 2100 1772 1110 740 9 976 541 1340 934 1685 1298 2018 1645 1249 832 10 880 402 1251 804 1600 1174 1936 1526 2264 1865 1387 925 11 1161 666 1514 1043 1854 1399 2184 1742 1530 1017 12 1072 536 1429 919 1772 1280 2105 1626 1665 1110 5 1246 823 1737 1296 2346 1948 1143 759 6 1082 573 1566 1035 2192 1713 2778 2331 1370 908 7 916 324 1392 773 2035 1478 2631 2112 1598 1059 C-SR140 8 1218 512 1878 1244 2485 1892 3063 2498 3624 3080 1826 1211 9 1713 1009 2331 1673 2916 2290 3483 2879 2054 1370 10 1557 765 2185 1446 2777 2073 3348 2670 3906 3247 2283 1522 11 2039 1226 2638 1864 3214 2468 3776 3051 2510 1673 12 1892 1007 2498 1655 3080 2267 3645 2855 2741 1824 5 1877 1212 2640 1943 3592 2966 1844 1236 6 1609 805 2359 1518 3340 2583 4256 3549 2212 1483 7 1332 398 2069 1093 3079 2200 4012 3192 2581 1730 C-SR160 8 1789 667 2826 1818 3777 2022 4680 3782 5556 4691 2949 1977 9 2566 1435 3533 2477 4448 3442 5332 4363 3321 2225 10 2313 1052 3297 2120 4223 3102 5116 4034 5986 4935 3691 2472 11 3062 1771 3999 2769 4900 3714 5776 4624 4056 2719 12 2818 1413 3767 2429 4676 3386 5559 4305 4422 2966 5 3228 2164 4457 3345 5957 4957 2737 1774 6 2839 1563 4051 2717 5592 4392 7041 5921 3287 2127 7 2451 962 3645 2088 5227 3827 6700 5393 3834 2480 C-SR190 8 3239 1460 4861 3261 6359 4865 7789 6366 9180 7808 4380 2833 9 4496 2696 6018 4337 7464 5863 8867 7323 4927 3186 10 4131 2131 5677 3809 7139 5360 8554 6838 9936 8269 5473 3540 11 5336 3281 6814 4858 8240 6354 9632 7798 6020 3893 12 4995 2753 6490 4355 7927 5869 9327 7327 6566 4246 5 3801 2774 5327 4254 7227 6262 3363 2430 6 3265 2035 4767 3481 6723 5566 8552 7472 4036 2917 7 2728 1295 4206 2707 6218 4870 8081 6822 4708 3405 C-SR210 8 3645 1934 5714 4174 7610 6172 9413 8044 11164 9844 5381 3893 9 5209 3479 7139 5523 8965 7426 10731 9247 6053 4380 10 4705 2783 6668 4873 8516 6807 10299 8651 12038 10436 6726 4868 11 6197 4223 8068 6188 9866 8054 11617 9856 7399 5356 12 5726 3574 7619 5569 9434 7457 11197 9276 8071 5843 5 5373 3977 7571 6111 10332 9018 4902 3632 6 4578 2895 6739 4979 9584 8001 12239 10761 5885 4355 7 3773 1822 5898 3858 8827 6992 11533 9819 6861 5087 C-SR240 8 5066 2727 8079 5975 10834 8869 13451 11579 15989 14184 7844 5810 9 7323 4957 10128 7919 12778 10674 15340 13312 8828 6541 10 6575 3948 9429 6976 12113 9777 14699 12446 17220 1503 9803 7264 11 8731 6026 11448 8872 14057 11574 16596 14183 10787 7987 12 8024 5076 10775 7967 13408 10701 15966 13335 11771 8719 5 8786 6576 12163 9852 16289 14210 6961 4952 6 7695 5050 11022 8257 15263 12775 19256 16934 8349 5944 7 6612 3514 9891 6652 14245 11332 18306 15585 9744 6928 C-SR270 8 8750 5057 13219 9897 17348 14245 21286 18332 25109 11132 7920 9 12193 8453 16389 12897 20374 17048 24229 21023 12527 8912 10 11167 7018 15431 11557 19461 15771 23349 19792 27156 23699 13914 9904 11 14473 10209 18548 14487 22469 18554 26300 22496 15310 10896 12 13523 8869 17643 13211 21597 17324 25452 21300 16697 11880 154G www.flotite.com

Technical Data Tech Bulletin Page 154H -09 Double Acting Actuators Output Torque (lbf-in) MODEL Air Pressure (Psig) 40 50 60 70 80 90 100 110 120 C-DA40 55 71 85 100 115 129 142 157 171 C-DA52 97 122 146 171 195 219 244 268 292 C-DA63 178 223 267 313 356 401 446 490 535 C-DA75 245 306 368 430 490 551 613 674 735 C-DA83 383 476 574 671 766 861 957 1053 1149 C-DA92 551 689 827 967 1103 1240 1378 1516 1654 C-DA105 808 1009 1211 1416 1615 1817 2019 2221 2423 C-DAI25 1225 1532 1833 2149 2450 2757 3063 3369 3676 C-DA140 2088 2611 3133 3662 4177 4699 5221 5743 6265 C-DA160 3249 4061 4873 5697 6497 7309 8122 8934 9746 C-DAI90 5198 6497 7797 9115 10396 11695 12995 14294 15594 C-DA210 6497 8122 9746 11394 12995 14619 16243 17868 19492 C-DA240 9398 11753 14097 16480 18796 21151 23495 25850 28194 C-DA270 14282 17856 21430 25046 28565 32139 35712 39286 42859 Weight (lbs) MODEL 40 52 63 75 83 92 105 125 140 160 190 210 240 270 C-DA 2 3 4 6 7 10 13 19 25 36 70 76 106 163 C-SR 3 4 6 7 12 14 22 29 44 78 85 135 216 Maximum Air Consumption (cu. inches) Per Stroke Model Action 52 63 75 83 92 105 125 140 160 190 210 240 270 CCW 7.3 12.9 18.3 26.2 39.1 58.0 97.6 152.5 225.7 359.9 457.5 671.2 1037.5 CW 9.7 14.1 20.7 28.7 44.6 53.7 85.4 134.2 195.2 329.4 457.5 549.3 854.4 Actuator Cycle Speed (sec.) Action Model 52 63 75 83 92 105 125 140 160 190 210 240 270 CCW DA 0.3 0.5 0.5 0.5 0.6 0.8 0.9 1.2 1.5 2.2 2.8 3.5 3.5 SR 0.4 0.6 0.6 0.6 0.7 1.0 1.1 1.4 2.0 2.5 3.5 4.2 4.5 CW DA 0.4 0.6 0.6 0.7 0.8 1.0 1.2 1.5 1.8 2.5 3.5 4.2 4.5 SR 0.4 0.8 1.0 1.0 1.2 1.2 1.5 1.8 2.5 3.0 4.0 5.0 6.0 154H www.flotite.com

Tech Bulletin Page 154I -09 Specifications Operating Conditions Operating Media: Dry and lubricated air, or non-corrosive gas. The maximum particle diameter must be less than 30 m. Air Supply Pressure: The minimum supply pressure is 35 psig. The maximum supply pressure is 150 psig. Operating Temperature: Standard (NBR O-ring): -4 o F to 175 o F. Low Temperature (Silicone O-ring): -30 o F to 175 o F. High Temperature (Viton O-ring): 5 o F to 300 o F. Stroke Adjustment: Stops allow adjustment range of ±5 o for the rotation at 0 o and 90 o positions. 5 5 90 Stroke Adjustment 100 Application: Both Indoor and Outdoor. Interface Specification 80 5 5 Drive and Flange to ISO 5211 configuration for easy direct mount onto a valve or connection with standardized mounting hardware. The NAMUR Drive Pinion and NAMUR top mounting connection for direct installation of accessories such as Limit Switch and Positioner. Air supply connection is designed in accordance with NAMUR Standard to install solenoid valve. Body and End Finish Electroless Nickel Plating Infused Housing Actuators Provide an effective corrosion resistant Application Different colors powder polyester painted and treatment body and ends available. 154I www.flotite.com

Actuators Sizing Guide Tech Bulletin Page 154J -09 Double Acting Actuators As shown in the figure, the output torque of double acting actuator is constant in both clockwise and counterclockwise rotation. Actuator can be sized by using steps as follow: Obtain the published maximum valve torque Add recommended safety factor (margin) to the published torque to get the required operating torque. The suggested safety factor for Double Acting Actuator in normal working conditions is at least 20%. Refer to the table of Double Acting Actuator Output Torque above, use the Air Supply Pressure to find the torque that greater than the required operating torque. Check the table Model item to determine the appropriate actuator. Double Acting Torque Curve Start End Torque 0 90 Example: A published highest seating/unseating torque for a 8 high performance butterfly is 2600 lbf-in; the hydrodynamic torque for 2 psi pressure drop is 500 lbf-in. The maximum valve torque is 2600 + 500 = 3100 lbf-in The required operating torque equals to 3100 + 3100 x 20% = 3720 lbf-in Known Air Supply Pressure 80 psig, the first actuator torque that exceeds to the required torque is 4177 lbf-in From the table, the selected double acting actuator model is C-DA140. Spring Return Actuators The output torque of spring return actuator is obtained by two operation - Air Stroke and Spring Stroke. Each stroke produces two different values in the operation end position "Start" or "End" shown in the right figures. The four values are used for sizing the actuator. Obtain the published maximum valve torque in work conditions. Add recommended safety factor (margin) to the published torque to get the required operating torque. The suggested safety factor for Spring Return Actuator in normal working conditions is 10%. Refer to the table of Spring Return Actuator Output Torque above, use the Air Supply Pressure to locate the Air End torque greater than the required operating torque. Move the table Spring Return Output column. Check the Spring End torque if it exceeds the required torque. Read left cross the table to locate the Spring Numbers and Actuator Model to determine the appropriate actuator size and spring numbers Start End Spring Return Torque Curve Torque Air Stroke 0 90 Torque Spring Stroke 0 90 Example: Given a maximum published torque for a 2 flanged valve in full differential pressure is 400 lbf-in The required operating torque is 400 + 400 x 10% = 440 lbf-in Given Air Supply Pressure is 80 psig, find the Spring Return actuator both Air End torque (487 lbf-in) and Spring End torque (454 lbs-in) values exceeding to the required torque (440 lbf-in) Cross the table to the left, the selected Spring Return actuator model is C-SR92-11. End Start 154J www.flotite.com

Tech Bulletin Page 154K-09 Ordering Information How To Order Series Type Model Spring Qty. Seals Option Color Code Coating 52 63 C SR - Spring Return DA - Double Acting 75 83 92 105 125 140 160 190 210 5 6 7 8 9 10 11 12 N - NBR S - Silicone V - Viton FO - Fail Open 180-180 Operation X - Special (B-) Body Color (E-) End Color T - TFE P - Polyester X - Special 240 270 Quality Assurance All actuators are manufactured in a registered ISO 9001-2000 facility All actuators are 100% inspected and tested in factory Each actuator is marked with a unique serial number for full traceability. We can also provide valve automation accessories, including Limit Switches, Positioners, Solenoid Valves, and Mounting Hardware. Other Series of Actuators A Series Actuator Stainless Steel Body, Pinion, Pistons and Fasteners Model A-DA/SR46-160 Torque: up to 6500 lbf-in for DA 3600 lbf-in for SR B Series Actuator Aluminum Body, Ends, Wide Range of Selection Model B-DA32-400, SR45-400 Torque: up to 78000 lbf-in for DA 63700 lbf-in for SR Special Stroke and 3-Position Actuators are also available 154K www.flotite.com

Tech Bulletin Page 154L-09 AIR CON Automation Accesories Flo-Tite Offers A Complete Line of Ball and Butterfly Valves Flo-Tite, Inc. P.O. Box 1293 Tel: (910) 738-8904 305 East 21st Street Lumberton, NC 28359 Fax: (910) 738-9112 Lumberton, NC 28358 Website:www.flotite.com E-mail: flotite@nc.rr.com This brochure is general in nature and manufacturer reserves the right to alter dimensions, materials or to make design improvements

FLO TITE valves & controls TM DESIGN FEATURES AND STANDARDS Proprietary PC Boards with industrial grade components soldered into place eliminate 90% of the internal wiring found in most actuation products. Tech Bulletin Page 152A-13 Flo-Tite s Promation Series offers a full line of industrial actuators that are designed & constructed to meet the demands of industrial installations & applications. Rugged Board Design Rugged Board Mounted Components NEMA 4X Rated Powder Coated Aluminum Enclosure Anti-Condensation Heater (Standard Equipment) Incoming Connections Clutchless Manual Override Form C Auxiliary and Limit Switches Single connection for motor control Epicyclic Gearing Color-Coded C Cams Flo-Tite ProMation Series offers full proportional control with several control options on all its models Full Featured Proportional Control AutoCalibration Several Control Signal Inputs 4-20mA 2-10vdc 1-5vdc Self-Powered Feedback Loop Generator Joystick Control for Programming Fault Indicator Temperature Feedback Joystick Control Status Indicator Processor Display On-Board Diagnostics Drive Direction Indicators

FLO TITE valves & controls TM Quarter Turn Non-Spring Return Actuators Tech Bulletin Page 152B-13 Product Torque Output Run Time Draw Mounting Information Height Weight Family in lbs Nm Sec (amp @ 120 vac) ISO 5211 8pt Female Drive mm in lbs PZ6 55 6 20 0.3 F03/F05 14 5 3 PZ15 135 15 20 0.3 F03/F05 14 5 3 P1 300 35 12 0.5 F03/F05 14 6 5 P1.A 445 50 20 0.5 F07 17 9 8 P1.B 135 15 8 0.5 F03/F05 14 6 5 P1.C 135 15 3 0.5 F03/F05 14 6 5 P2.0 600 67 17 1 F07 22 11.4 25 P2 800 90 15 1 F07 22 11.4 25 P3.0 1,150 130 22 1 F07 22 11.4 25 P3 1,335 150 22 1 F07 22 11.4 25 P4.0 2,200 248 16 1.3 F10 35 12.5 49 P4 3,500 400 16 1.3 F10 35 12.5 49 P5 4,400 500 22 1.5 F10 35 12.5 49 P6 5,800 650 28 1.8 F10 35 12.5 49 P7 8,900 1,000 46 3.2 F12 36 16.5 80 P8 13,500 1,500 46 4 F12 36 16.5 80 P9 17,500 2,000 58 3.2 F16 75* 23.2 125 P10 22,000 2,500 58 4 F16 75* 23.2 125 P11 26,500 3,000 58 3 F16 75* 23.2 125 P13 40,500 4,500 80 3.5 F25 72* 22.5 179 Product Ordering Product Family Voltage Level Control Special Designations P 1-120 P N 4 - Note: Not all combinations are possible. Please consult factory. 12 24 120 230 233 383 483 12VAC/DC 24VAC/DC 120VAC 230VAC 230V 3 Phase 380V 3 Phase 480V 3 Phase On/Off/Jog Proportional Non-Spring Return Quarter Turn Spring Return Failsafe Electric Actuators - P Product Torque Output Run Time Spring Return Time (Sec) Draw Mounting Dimension Height Weight Family in lbs Nm Sec 24 v 120 /230 v (amp @ 120 vac) ISO 5211 8 pt Female Drive mm in lbs PA 450 50 7 3 3 1.5 F07 17 15.75 59 PB 1,150 130 7 3 8 3.8 F10 22 18.82 124 PC 1,750 200 11 3 12 3.8 F12 27 21.57 209 PD 2,300 260 17 3 12 3.8 F12 27 21.57 209 With Manual Override PAO 450 50 7 3 3 1.5 F07 17 21.06 82 PBO 1,150 130 7 3 8 3.8 F10 22 25.3 163 PCO 1,750 200 11 3 12 3.8 F12 27 29.05 297 PDO 2,300 260 17 3 12 3.8 F12 27 29.05 297 Product Ordering N 4 NEMA 4X Product Spring Voltage Family Direction Level Control PCO - CCW 120 P S 4 CW CCW 12VAC/DC 24VAC/DC 24 120 230 12VAC/DC 24VAC/DC 120VAC - P On/Off/Jog Proportional S Spring Return 4 NEMA 4X AC DC RO RC MCC XMCC TS 12 or 24VAC 12 or 24VDC Relay Open (2 pos) Relay Close (2 pos) Motor Control Center Used w/ Field Switchgear Torque Switch Note: 24v available in on/off only Note: Not all combinations are possible. Please consult factory.

FLO TITE valves & controls Power Backup Units (PBU) TM Local Control Stations (LCS) ProMation LCS s can be remotely located or directly mounted on the actuator providing an array of controls and displays of functions being performed. LCS s are typically used when there is a need to take control of an actuator at or near the actuator s location. The LCS s can be confi gured in a wide range of options from Mode Select and On/Off switches to units indicating proportional signals, valve position, power on, valve open and valve closed. ProMation PBU s are designed for Quarter Turn (P) and Linear (PL) series of actuators. The PBU s provide backup power in critical applications. Upon loss of power, the actuators are driven to a fi eld selectable position, such as open or closed. PBU options include visual indication of the actuator position as well as remote status of incoming power and battery system. Flo-Tite, Inc. 4815 West 5th St. Lumberton, NC 28358 P. O. Box 1293 Lumberton, NC 28359 Website: www.flotite.com LCS A Tech Bulletin Page 152C-13 Extraordinary Electrical Engineering Applied to Industrial Actuators Exclusive ProMation AutoCalibration Eases Installation ProMation Engineering s proportional controls are the only actuators that offer AutoCalibration that allows set up at the push of a button; making installation, maintenance and re-installation easy and repeatable. Fault Indicator and On-Board Diagnostics Can Reduce Wiring Issues The ProMation proportional control board will indicate when input signals are miswired and will not operate. On-Board diagnostics show status of the actuator, incoming signal, feedback signal as well as a history of operating parameters for additional process analysis. Multiple Input Signals Increase Flexibility ProMation Engineering proportional controls are compatible with most industrial control signals (4-20mA, 1-5vdc or 2-10vdc). BUS network interfacing is also available. Wide Voltage Range for All Industrial Applications ProMation Engineering manufactures actuators to operate under 12VDC/VAC, 24VDC/VAC, 120VAC, 230VAC power, as well as 230V, 380V, 460V & 575V 3 phase power. LCS J/K Full Documentation We offer complete wiring diagrams, fi eld installation manuals and set up documentation for all our products, both in printed and digital form. We regularly host customized educational webinars for our customers. Industrial Applications ProMation Engineering actuators have been installed to operate process controls such as butterfl y valves, ball valves, high performance butterfl y valves, plug valves and dampers, in a broad range of demanding industrial applications. Tel: (910) 738-8904 Fax: (910) 738-9112 E-mail: flotite@nc.rr.com Due to continuous development & improvement of our product range, we reserve the right to alter the dimensions and techcal data included in this brochure