CORRIGENDUM - II No. 6000003469/M.E.03/ Dated : 28/03/2014 Ref: Tender Enquiry No. 6000003469/M.E.03/2235 data 18.12.2013 Against our above tender enquiry was published in the http://spmhoshangabad.spmcil.com on dated 30.01.2014, Corrigendum - II as below is being issued to the tender enquiry with the following amendments : Sl No. Page No. /Clause No. (Reference: Webcast Tender Document) 1. Section VII : Technical Specifications 2. Section XI : Price Schedule For existing Please read "Annexure-A" Sr.No. Price Break Up ---- Rate For item No.-1 to item No.-19. Read as Please read "Annexure-B" Sr.No. Price Break Up ---- Rate For item No.-1 to item No.-18. 3. Closing date and time for receipt of tenders Opeing date and time of tenders 11.04.2014 11:00:00 25.04.2014 11:00:00 11.04.2014 15:00:00 25.04.2014 15:00:00 All other terms and condition of our tender enquiry will remain unchanged. Sd/- Officer Material
Section VII : Technical Specifications : "Annexure-A" for Existing 1. "XL" Roary Union type XLS having C.I. body and nikle plated M.S. shaft size: 3/4" BSP and with Right Hand thread. 2. "XL" Roary Union type XLS having C.I. body and nikle plated M.S. shaft size: 3/4" BSP and with Left Hand hread. 3. Cast Iron pulp valve (Gate valve) Body cast iron, gate S.S.316, spindle S.S.410, Flange face to face 57mm, PCD 235mm, 4 hole trapped & 4 hole free, size -150mm(6"). 4. Cast iron double flange gate valve with C.I. round handle non rising spindle and renewable G.M. 5. Bronze gate valve size:-3/4" (20mm) Make: HM, Sant, Leader, KSB, Forbes Marshall and D.P. enterprises." 6. Bronze Sluice Gate Valve -3 NB As per IS: 778/1980 class-i ISI Mark screwed in bonnet inside non rising steam integral seat sold wedge- Trim cu alloy screwed female threads to IS:554(parallel)BTP=1.5mpa hyd stp 1.0mpa hyd. MAKE:-Leader, sant, KSB, Crescent, Skilt, Forbes-Marshal/Kiloskar/GG. 7. Seatless and glandless piston valve, forged carbon steel body screwed ends Size:-25NB Make; Forbes- Marshal, KSB, Leader, sant Crescent, 8. Pneumatic cyl.opp. Valve 50 NB pulp(zero leakage) flange pn 10. 9. Knife Gate Valve Cl. Opp. 65 NB pulp(zero leakage) flange pn 10. 10. Pneumatic cylinder operatted double acting split body knife gate valve. size: 80nb flange pn 10 app-pulp 4% cnsitency(zero leakge) 11. Bronze steam stop valve screwed 20mm Bronze globe steam stop valve (straight Type) screwed rising stem spindle with bolt seat arrangement in SS arts screwed female ends with BSPT thread suitable for 250 PSI working pressure with IBR test certificate. Cont
//2// 12. SS AISI(304) forged steel screwed end BSP female thread handle operated ball valve size:-1"(25mm). 13. SS AISI(304) forged steel screwed end BSP female thread handle operated ball valve size:- 1/2"(15mm). MAKE:-Leader,sant,KSB,Crescent. 14. G.M. horizontal lift check valve screwed bonnet body tested to 1.0mpa hydraulic female screwed end, valve confirming to 778 class III ISI marked. Size-2"(50mm). 15. Bronze Blowoff Valve Size- 2-1/2 (65 mm) Bronze parallel slide blow Down valve with SS/manual working parts Rack and piston operated heavy pattern flanged ends with operating key flanges to BS-10 table"h" max B.O.P. 250 PSIG max. temp. 428 Degree F(220 Degree C)tested to 500 PSIG Hyd. with IBR test certificate. Flange to flange distance 219mm.seat 500 PSIG. 16. Gun metal pressure gauge cock Size:-3/8"(10mm) screwed female threads both ends, Body test pressure 00 PSIG hydraulic, sheet test pressure 100 PSIG. With work test certificate. 17. Cast iron double flange gate valve with C.I. round handle non rising spindle and renewable G.M. 18. Bronze gate valve size:-3/4""(20mm) Make: HM, Sant, Leader, KSB, Forbes Marshall and D.P. enterprises." 19. PVC Vertical Non Return Valve Size-2"(50 mm ).Female thread 2"BSP. Note:- Bidder should confirm technical specification of material as per the tender document.
Section VII : Technical Specifications : "Annexure-B" Read as 1. "XL" Roary Union type XLS having C.I. body and nikle plated M.S. shaft size: 3/4" BSP and with Right Hand thread. Application : Water. Make : Marko, Carbon, Sun-Krishna. 2. "XL" Roary Union type XLS having C.I. body and nikle plated M.S. shaft size: 3/4" BSP and with Left Hand hread. Application : Water. Make : Marko, Carbon, Sun-Krishna. 3. Cast Iron pulp valve (Gate valve) Body cast iron, gate S.S.316, spindle S.S.410, Flange face to face 57mm, PCD 235mm, 4 hole trapped & 4 hole free, size -150mm(6"). MAKE:-HM, Sant, Leader, KSB, Forbes Marshall, Vaas, Orbinox and Bajaj. 4. Cast iron double flange gate valve with C.I. round handle non rising spindle and renewable G.M. MAKE:-HM, Sant, Leader, KSB, Forbes Marshall, Vaas, Orbinox and Bajaj. 5. Bronze gate valve size:-3/4" (20mm) Application : Water. Make: HM, Sant, Leader, KSB, Forbes Marshall, Vaas, Orbinox and Bajaj. 6. Bronze Sluice Gate Valve -3 NB As per IS: 778/1980 class-i ISI Mark screwed in bonnet inside non rising steam integral seat sold wedge- Trim cu alloy screwed female threads to IS:554(parallel)BTP=1.5mpa hyd stp 1.0mpa hyd. Application : Water. MAKE:-Leader,sant,KSB,Crescent,Skilt,Forbes-Marshal/Kiloskar/GG/Bajaj. 7. Seatless and glandless piston valve, forged carbon steel body screwed ends Size:-25NB. Application for steam (Dryer Section) Make : Forbes- Marshal, KSB, Leader, sant Crescent, Vaas and Orbinox 8. Pneumatic cyl.opp. Valve 50 NB pulp(zero leakage) flange pn 10. Class of Valve (Zero leakage type) Make - Orbinox/ vabs/lohse/festo/vaas/regent. 9. Knife Gate Valve Cl. Opp. 65 NB pulp(zero leakage) flange pn 10. Class of Valve (Zero leakage type). Make - Orbinox/ vabs/lohse/festo/ Vaas/Regent. 10. Pneumatic cylinder operatted double acting split body knife gate valve. size: 80nb flange pn 10 app-pulp 4% cnsitency(zero leakge). Class of Valve (Zero leakage type). "Regent" Make - Orbinox/ vabs/lohse/festo/vaas/fluidtech. 11. Bronze steam stop valve screwed 20mm Bronze globe steam stop valve (straight Type) screwed rising stem spindle with bolt seat arrangement Cont...
//2// in SS parts screwed female ends with BSPT thread suitable for 250 PSI working pressure with IBR test certificate. MAKE:-Leader, sant, KSB, Crescent, Vaas and Bajaj. 12. SS AISI(304) forged steel screwed end BSP female thread handle operated ball valve size:-1"(25mm). Application : Chemical type. MAKE:-Leader, sant, KSB, Crescent, Vaas and Bajaj. 13. SS AISI(304) forged steel screwed end BSP female thread handle operated ball valve size:- 1/2"(15mm). Application : Dye Chemical. MAKE:-Leader, sant, KSB, Crescent, Bajaj. 14. G.M. horizontal lift check valve screwed bonnet body tested to 1.0mpa hydraulic female screwed end, valve confirming to 778 class II ISI marked. Size-2"(50mm). Application : Steam Conderstate Water. MAKE:-Leader, sant, KSB, Crescent, Vaas and Bajaj. 15. Bronze Blowoff Valve Size- 2-1/2 (65 mm) Bronze parallel slide blow Down valve with SS/manual working parts Rack and piston operated heavy pattern flanged ends with operating key flanges to BS-10 table"h" max B.O.P. 250 PSIG max. temp. 428 Degree F(220 Degree C)tested to 500 PSIG Hyd. with IBR test certificate. Flange to flange distance 219mm.seat 500 PSIG. Make : HM, Sant, Leader, KSB, Forbes Marshal and Vaas. 16. Gun metal pressure gauge cock valve Size:-3/8"(10mm) screwed female threads both ends, Body test pressure 300 PSIG hydraulic, sheet test pressure 100 PSIG. With work test certificate. Make : HM, Sant, Leader, KSB and Forbes Marshal. 17. Bronze gate valve size:-3/4""(20mm) Application : Air Water. Make: HM, Sant, Leader, KSB, Forbes Marshall and Vaas. 18. PVC Vertical Non Return Valve Size-2"(50 mm ).Female thread 2"BSP. Application : Chemical Water. Note:- Bidder should confirm technical specification of material as per the tender document.