Hand & Gauge Isolation Valves Needle Valves Gauge Valves Block & Bleed Valves. Manifolds

Similar documents
Hand & Gauge Isolation Valves Needle Valves Gauge Valves Block & Bleed Valves. Manifolds

Instrument Valves and Manifolds

Hex Monoweld Valves. Built Hex tough for a lifetime of use. See how inside... www. hexvalve.com

Static Pressure Manifolds M25, M25A, M25B, M251 and M251B

ANDERSON GREENWOOD MC/MT SERIES INTEGRAL MANIFOLDS

Anderson Greenwood M24A/M24T Differential Pressure Manifolds

MANIFOLDS VALVE. Mfg & Exp. : Valves & Fittings. A Trusted Name in Valves and Fittings ISO 9001:2008 COMPANY. Catalogue No.

ANDERSON GREENWOOD M4AP/M4TP STATIC PRESSURE MANIFOLDS

ANDERSON GREENWOOD M25/M25A/M25B/M251/M251B MANIFOLDS

Anderson Greenwood MB Series Integral Manifolds

Recognized globally for our quality, service and the ability to deliver! ISO 9001:

Static Pressure Manifolds PTM and PT7 2-Valve Manifolds

HOKE Monoflange Valves. Primary Isolation Valves

Anderson Greenwood PTM/PT7 Static Pressure Manifolds

instrument manifolds Instrument Manifolds Index General Purpose Manifolds Overview 1 2 Valve 2 3 Valve 4 5 Valve 6 Mounting kits 8

Monoflanges. Page 1. Rev. 0-0

T-Bar Bonnet. Monoflanges STANDARD OPTIONS. O.S.&Y. Bonnet (firesafe) Gas Solution Bonnet. Anti-Tamper Bonnet

Manifold and Isolation Valve Mounting System for Direct Mounting DP Transmitters

Page 1 Worldwide Rev e

Anderson Greenwood M25/M251 Block and Bleed Gauge Valves

Static Pressure Manifolds M4AP and M4TP Manifolds

Anderson Greenwood M4TL Liquid Level Manifolds

Gauge Valves. Block and Bleed Valves Multi-Port Valves OS&Y Valves

Anderson Greenwood Instrumentation Products - Manifolds and Accessories

Instrumentation Manifold Valves

Needle Valves. Catalog 1203/1205 Aug 2012

Instrumentation Products Overview. Flow Control

Rosemount Manifolds. Rosemount Manifolds. Product Data Sheet , Rev LA Catalog Contents

Kerotest KM4AP & KM4TP Static Pressure Manifolds

Instrument Manifolds. V, VB, and VL Series. 2-, 3-, and 5-valve instrument manifolds

Recognized globally for our quality, service and the ability to deliver! ISO 9001: Quality Service Experience

Mark 675 Series. Pressure Regulators Mark 675 Pressure Regulators. Self-Operated Pressure Regulators. Mark 675 Features

3 & 5 VALVE DIFFERENTIAL MANIFOLDS Pressures to 10,000 psi (690 bar)

TBV Valve Instrument Connection Systems Quality measurement technology, proven close-coupled mounting practices, and integrated hardware for optimal


Valve manifold for differential pressure measuring instruments 3-, 5-valve manifold Models IV30, IV31, IV50 and IV51

Anderson Greenwood Series M9 Block and Bleed Gauge Valves

Natural Gas Manifolds M6A, M6T, M6TA 5-Valve Manifolds

ANDERSON GREENWOOD SERIES M9 BLOCK AND BLEED GAUGE VALVES

Instrumentation Manifold Valves

Manifold & Gauge Valves I [

Delivering Peak Performance. High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments

Multi-Port Gauge Valves M5 and M51

ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS INSTRUMENT VALVES PRODUCT OVERVIEW

MV2-DT MV3-D2 MV3-RDP3 MV5-DT

Instrument Manifold Systems

Block-and-bleed valve 2-valve manifold Models IV20 and IV21

Solution Partner. Leak - Proof Flow & Control. Integral Block & Bleed Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f.

Oil and Gas Products Pressures to 30,000 psi

Rosemount Manifolds. Rosemount Manifolds. Product Data Sheet , Rev NB January Contents

Rosemount Manifolds. Rosemount Manifolds. Product Data Sheet , Rev MA August Contents

INTRODUCTION AND STANDARD SPECIFICATIONS

Manifold Valve Accessories

3L/T-2P/Q33 Series 3 Way Ball Valves

Hexagonal Bar Stock Needle Valve

Distributed By: M&M Control Service, Inc

Manifold Valves. Important!

ANDERSON GREENWOOD H7/H71 HAND VALVES

Mark 50 Series. Back Pressure Regulators Mark 50 Self-Operated Back Pressure Regulators. Self-Operated Back Pressure Regulators.

Anderson Greenwood M1/M110 Differential Pressure Manifolds

ANDERSON GREENWOOD LARGE BORE INTELLIMOUNT SYSTEM

Products for the Oil & Gas Industry

Double Block and Bleed Manifolds and Flanged Products. Catalog 4190-FP October 2003

Instrumentation Ball Valves

INSTRUMENTATION MANIFOLDS VALVES. VM Series.

"S" Series Needle/Gauge Valves

Rosemount Manifolds. Product Data Sheet October , Rev PB. Factory assembled, leak-tested, and calibrated

Instrumentation Manifolds Traditional C13WT series. For DPharp EJX & EJA-E Differential Pressure and Pressure Transmitters

P3M5S, P4M5S, P6M5S 5-VALVE SOFT SEAT MANIFOLD

Solution Partner. Leak - Proof Flow & Control. Manifold & Gauge & Rising Plug Valves. W e. s u p p o r t. t h e

TBV Instrumentation Valves

LEVEL CONTROL SWITCHES

VM Series Manifolds / Gauge Valves Manifolds- Direct & Remote Mount Gauge Valves Gauge Mount / Block & Bleed

Manual & Automated Ball Valves

Rosemount Manifolds. Product Data Sheet September , Rev PA. Factory assembled, leak-tested, and calibrated

we are very grateful to our valuable customers who have shown a deep attention on to KpLÕ s growth and extended generous supports.

Instrument Manifold Valves

General Specifications

NEEDLE VALVE GAUGE VALVE VALVE MANIFOLD BALL VALVE ACCESSORIES

Model DF100 Control Valve

Manual & Automated Ball Valves

Mark 695 Series. Pressure Regulators Mark 695 Piloted Tank Blanketing Regulators. Piloted Tank Blanketing Regulator 3/4"- 1" Optional Features

Introduction. Application & Installation. Integral Block & Bleed Valves

Monoblock DBB. Page 1

Valves and manifolds

* Contact your sales representative for compliance to NACE MR or later requirements.

Mark 60 Series. Pressure Regulators Mark 60 Pressure Regulators. Self Operated Pressure Regulators. CRN Registration Number Available

VALVES & CONTROLS ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS LARGE BORE INTELLIMOUNT SYSTEM

PATENT NO.:ZL / ZL

Manifold Accessories. Catalog 4190-FP-ACC May 2007

General Specifications

Instrumentation Products Monoflanges & VariAS-Blocks

J Series Filters HIGH PRESSURE FILTERS. J88 Mini In-Line (Replaceable Filter) J85 Tee-Type. J82 Mini In-Line. J83 In-Line

CONSTRUCTION MATERIAL 2 HOW TO ORDER 2 DESIGN FEATURES 3 PRODUCTS INDEX 4

ANDERSON GREENWOOD. Hand Valves and Accessories INSTRUMENTATION PRODUCTS. Soft Seated Valves Hard Seated Valves Mini Valves

5030/5130. Hard Seat & Soft Seat/Tip. Flow Schematic. Manifold Valves, 5-Valve Natural Gas

Valves and Equipment

General Specifications

One and Two-Piece Carbon Steel Flanged Ball Valves Illustrated Index

P R O C E S S V A L V E S. TBV Instrument Valves TBV

Transcription:

Hand & Gauge Isolation Valves Needle Valves Gauge Valves Block & Bleed Valves Manifolds Two, Three & Five Valve Manifolds for Gauge and Differential Pressure Applications Accessories Built Hex tough for a lifetime of use. See how inside... HEXVALVE A Division of Richards Industries 3170 Wasson Road Cincinnati, OH 45209 toll free. 800.543.7311 local. 513.533.5600 fax. 513.871.0105 www.hexvalve.com 1

Hex Valve History Most Petrochemical, Refining and Upstream Oil & Gas professionals know a "Hex Valve" as a Generic description for bar stock instrument, gauge and orifice valves. That didn't happen by accident. These valves were originally developed and marketed by us decades ago as a means to simplify the piping associated with gauge and differential pressure transmitter applications. Hex Valve has repeatedly demonstrated innovation since the company's inception. We were the first company to introduce the Non- Rotating Tip (NRT) stem technology to our industry with our conical NRT stem. The rotating conical tip end forms a lapped mate with the seat preventing galling, and the cross-section scoring that is endemic of ball tip stems. Since our acquisition in 1985 by Richards Industries, our product line has expanded to cover almost every conceivable primary and secondary valve application for a variety of automated process industries. From small 1/4" needle valves and patented stabilized instrument platforms for the Natural Gas Industry to 2, 3, and 5 valve manifolds and high temperature primary valves and hydrocarbon sampling valves for Oil and Gas Production, Refineries and Power plants. See our website at www.hexvalve.com for our complete product line. Manifold valves used in Europe have traditionally been of a more efficient design and shape, minimizing space, weight and cost. Hex Valve's new offering continues that excellent tradition with the offerings on the following pages. Hex does it all with one simple objective in mind... "Create value for the customer by simplifying the piping associated with instrumentation, and the distribution of process and utility fluids". Hex Value Proposition Hex Valves reduce customer Capex cost by: Reducing installation size, material, weight and installation labor Hex Valves reduce customer SH&E cost by: Reducing the number of potential installation leak points Reducing total installation weight and moment arm Hex Valves reduce O & M costs by: Creating time saving and unique instrument valve vent and calibration access 2

Table of Contents Handle - Needle Valves EN39 Block & Bleed Valves EB51 Gauge Valves EG35 EG48 Manifold Valves Gauge Pressure EM59 EM50 EH72 EH74 EH79 Differential Pressure EM53 EM54 EM45 EH33 EH34 EH35 EM57 EM74 EH37 EH38 EH39 4-5 6-7 8-9 10-11 12-13 14-15 16-17 18-19 20-21 22-23 24-25 26-27 28-29 30-31 32-33 34-35 36-37 38-39 40-41 42-43 Accessories Manifold Mounting Bracket Oval Flange Adaptor 44 44 3

Hand - Needle Valves - EN39 HAND/NEEDLE VALVES The EN39 Instrument Valves are compact and economical high pressure instrument block valves. Stem tip is non-rotating tip (NRT) style, standard. Product Availability All valves are available with integral hard seats, 316-NACE stainless steel body and trim and Teflon or Graphite packing. Hastelloy C, Monel models (see order grid) available upon request. Ratings Stainless Steel with TFE Packing: 6000 psig @ 100 F (414 bar @ 38 C) 4200 psig @ 400 F (290 bar @ 204 C) Inlet 10 H Max. Open Height Outlet 1 11 6 8 A 5 3 1/2" NPT (F) B1 L1 FLOW L B2 Inlet Outlet A B1 B2 L L1 H 1/2" NPT 32 19 19 68 34 (F) (1.26) (0.75) (0.75) (2.68) (1.34) A 89 (3.50) 7 4 2 9 Inlet B1 1/2" NPT (M) L1 L 10 B2 H Max. Open Height Outlet Inlet Outlet A B1 B2 L L1 H 1/2" NPT 32 19 19 88 56 (F) (1.26) (0.75) (0.75) (3.46) (2.20) A A 1 89 (3.50) No. Description Material Qty 1 Body SS316/NACE 1 2 Gland Body SS316/NACE 1 3 Gland Retainer SS304 1 4 Gland Seal PTFE 2 5 Check Nut SS304 1 6 Spindle SS316/NACE 1 7 Trim SS316/NACE 1 8 Handle SS304 1 9 Washer SS 1 10 Lock Pin SS304 1 11 Dust Cap PVC 1 Note: Other materials and options available. 4

MODEL BODY CONFIG. BODY MAT'L SIZE SIZE STEM/TIP SEAT MAT'L PACKING EN39 1 D 1 3 1 1 3 1 2 MODEL EN39 Standard 10 1 FNPT 5 BODY 1 Hard Seat 6 BODY MATERIAL D 316SS NACE H Hastelloy C M Monel 11 STEM/TIP 3 316-NACE/316-NACE B Monel/Monel D Hastelloy C/Hastelloy C 12 SEAT MATERIAL 1 Integral Seat 7 SIZE 1 1/4" 8 1 MNPT 3 FNPT 13 PACKING 2 TFE 3 Graphite Note: Inlet and Outlet must be same size 9 SIZE 1 1/4" Flow Schematic 5

Block & Bleed Valves - EB51 BLOCK & VENT VALVES The economical EB51 features a fully packed and backseated block valve along with a bleed/plug. With a gauge or transmitter threaded in its outlet, the EB51 will allow pressure to be blocked and bled for convenient instrument removal. The EB51 can also be threaded into a Hex Primary Block Valve to provide secondary block and bleed functions. Product Availability All valves are available with integral hard seats, 316-NACE stainless steel body and trim and Teflon or Graphite packing. Hastelloy C, Monel models (see order grid) available upon request. Ratings Stainless Steel with TFE Packing: 6000 psig @ 100 F (414 bar @ 38 C) 4200 psig @ 400 F (290 bar @ 204 C) 8 11 6 Max. Open Height 3.75 (95mm) Inlet NPT (M) C L2 L 10 1 Outlet NPT (F) A C L1 A A 12 5 7 No. Description Material Qty 1 Body SS316/NACE 1 2 Gland Body SS316/NACE 1 3 Gland Retainer SS304 1 4 Gland Seal PTFE 2 5 Check Nut SS304 1 6 Spindle SS316/NACE 1 7 Trim SS316/NACE 1 8 Handle SS304 1 9 Washer SS 1 10 Lock Pin SS304 1 11 Dust Cap PVC 1 12 1/4" NPT Bleed Plug SS316/NACE 1 3 4 2 9 Note: Other materials and options available. Size L L1 L2 C A Test Pressure Hydro. at Room Temp 1/2" NPT (M) x 1/2" NPT (F) 88 (3.46) 30 (1.18) 40 (1.57) 19 (0.75) 32 (1.26) 6000 psi 6

MODEL BODY CONFIG. BODY MAT'L SIZE SIZE STEM/TIP SEAT MAT'L PACKING EB51 1 D 3 1 3 1 3 1 2 MODEL EB51 Standard 10 1 FNPT 5 BODY 1 Hard Seat 6 BODY MATERIAL D 316SS-NACE H Hastelloy C M Monel 11 STEM/TIP 3 316-NACE/316-NACE B Monel/Monel D Hastelloy C/Hastelloy C 12 SEAT MATERIAL 1 Integral Seat 7 SIZE 8 1 MNPT 3 FNPT 13 PACKING 2 TFE 3 Graphite Note: Inlet and Outlet must be same size 9 SIZE *Available in 1/2" MNPT x 1/2" FNPT or 1/2" FNPT x 1/2" FNPT Flow Schematic BLEED 7

Gauge Valves - EG35 GAUGE VALVES The EG35 gauge valve, with a female or male inlet, female or male outlet and integral vent valve, meets the application requirement for a block and bleed valve without the need for a close nipple when connecting to a female port on a gauge pressure transmitter. The male outlet configuration provides one less threaded connection and therefore one less potential leak point. Other manufacturers generally supply 1/2" NPT female instrument connections on gauge valve installations. This usually requires the installation of a 1/2" stainless steel close nipple with each gauge or pressure transmitter. Product Availability All valves are available with integral hard seats, 316-NACE stainless steel body and trim and Teflon or Graphite packing. Hastelloy C, Monel models (see order grid) available upon request. Ratings Stainless Steel with TFE Packing: 6000 psig @ 100 F (414 bar @ 38 C) 4200 psig @ 400 F (290 bar @ 204 C) 11 8 6 32 (1.25") 5 3 4 66 (2.59") 2 115 (4.50") 7 9 Process 1/2" NPT (F) 32 (1.3") 19 19 (0.74") Instrument 1/2" NPT (M) Max Open Height 180 (7.1") 12 10 32 (1.3") 1 No. Description Material Qty 1 Body SS316/NACE 1 2 Gland Body SS316/NACE 2 3 Gland Retainer SS304 2 4 Gland Seal PTFE 4 5 Check Nut SS304 2 6 Spindle SS316/NACE 2 7 Trim SS316/NACE 2 8 Handle SS304 2 9 Washer SS 2 10 Lock Pin SS304 2 11 Dust Cap PVC 2 12 1/4" NPT Plug SS316/NACE 1 Note: Other materials and options available 8

MODEL BODY CONFIG. BODY MAT'L SIZE SIZE STEM/TIP SEAT MAT'L PACKING EG35 1 D 3 1 3 7 3 1 2 MODEL EG35 Standard 9 SIZE 5 BODY 1 Hard Seat 6 BODY MATERIAL D H M 316-NACE Hastelloy C Monel 7 SIZE 8 1 MNPT 3 FNPT 10 1 FNPT 7 MNPT 11 STEM/TIP 3 316-NACE/316-NACE B Monel/Monel D Hastelloy C/Hastelloy C 12 SEAT MATERIAL 1 Integral Seat 13 PACKING 2 TFE 3 Graphite Flow Schematic DRAIN 9

Gauge and Block & Vent Valves - EG48 GAUGE VALVES The EG48 gauge valve provides three outlet connections to facilitate the mounting of gauges and other gauge pressure instruments in a variety of positions. The design creates a compact installation with fewer leak points compared to conventional pipe nipple and Tee arrangements.. The EG48 has an integral hard seat which matches the body material. Hand - Needle Valves can be installed in one of the three outlets to act as integral vent valves. Product Availability All valves are available with integral hard seats, 316-NACE stainless steel body and trim and Teflon or Graphite packing. Hastelloy C, Monel models (see order grid) available upon request. Ratings Stainless Steel with TFE Packing: 6000 psig @ 100 F (414 bar @ 38 C) 4200 psig @ 400 F (290 bar @ 204 C) 8 11 5 6 3 4 Inlet B1 L1 1/2" NPT (M) L 1/2" NPT (M) 10 Outlet 1/2" NPT (F) 1 B2 L2 H Max. A 1/2" NPT (F) Drain Inlet Outlet A B1 B2 L L1 L2 H 1/2" NPT 32 19 19 110 51 32 (F) (1.26) (0.75) (0.75) (4.33) (2.0) (1.26) A 89 (3.50) 7 No. Description Material Qty 1 Body SS316/NACE 1 2 Gland Body SS316/NACE 1 3 Gland Retainer SS304 1 4 Gland Seal PTFE 2 5 Check Nut SS304 1 6 Spindle SS316/NACE 1 7 Trim SS316/NACE 1 8 Handle SS304 1 9 Washer SS 1 10 Lock Pin SS304 1 11 Dust Cap PVC 1 Note: Other materials and options available. 2 9 10

MODEL BODY CONFIG. BODY MAT'L SIZE SIZE STEM/TIP SEAT MAT'L PACKING EG48 1 D 3 1 3 1 3 1 2 MODEL EG48 Standard 9 SIZE 5 BODY 1 Hard Seat 6 BODY MATERIAL D 316-NACE H Hastelloy C M Monel 7 SIZE 8 1 MNPT 10 1 FNPT 7 MNPT 11 STEM/TIP 3 316-NACE/316-NACE B Monel/Monel D Hastelloy C/Hastelloy C 12 SEAT MATERIAL 1 Integral Seat 13 PACKING 2 TFE 3 Graphite Flow Schematic 11

Gauge Pressure Manifold Valves - EM59 TWO VALVE MANIFOLD: REMOTE MOUNT The EM59 is a compact remote mounted two valve manifold that functions as a shutoff and vent valve for static pressure instrumentation. Compared to traditional piping methods that use an arrangement of pipe nipples or tubing, Tees and hand valves, the EM59 Series provides an easy-to-install unit that performs the same function for less material and labor cost. The EM59 also reduces the number of threaded connections, resulting in fewer potential leak points. Product Availability All valves are available with integral hard seats, 316-NACE stainless steel body and trim and Teflon or Graphite packing. Hastelloy C, Monel models (see order grid) available upon request. Ratings Stainless Steel with TFE Packing: 6000 psig @ 100 F (414 bar @ 38 C) 4200 psig @ 400 F (290 bar @ 204 C) 12 Ø6.5 holes 2. nos 1/2" NPT (F) Port Process Side 8 22 (0.87") 11 6 17.0 (0.28") 63.5 (2.5") 5 3 4 22.5 (0.89") 1/2" NPT (F) Port Instrument Side 7 2 9 Max open height 105 (4.1") 10 1 54 (2.1") Max open height 127 (5.0") 32 (1.3") No. Description Material Qty 1 Body SS316/NACE 1 2 Gland Body SS316/NACE 2 3 Gland Retainer SS304 2 4 Gland Seal PTFE 4 5 Check Nut SS304 2 6 Spindle SS316/NACE 2 7 Trim SS316/NACE 2 8 Handle SS304 2 9 Washer SS 2 10 Lock Pin SS304 2 11 Dust Cap PVC 2 12 1/4" NPT Drain Plug SS316/NACE 1 Note: Other materials and options available. 12

MODEL BODY CONFIG. BODY MAT'L SIZE SIZE STEM/TIP SEAT MAT'L PACKING EM59 1 D 3 3 3 1 3 1 2 MODEL EM59 Standard 10 1 FNPT 5 BODY 1 Hard Seat 6 BODY MATERIAL D 316SS NACE H Hastelloy C M Monel 11 STEM/TIP 3 316-NACE/316-NACE B Monel/Monel D Hastelloy C/Hastelloy C 12 SEAT MATERIAL 1 Integral Seat 7 SIZE 8 3 FNPT 13 PACKING 2 TFE 3 Graphite 9 SIZE Flow Schematic DRAIN 13

Guage Pressure Manifold Valves - EM50 TWO VALVE MANIFOLD: DIRECT MOUNT The EM50 is a single flanged, static pressure manifold that incorporates a block valve and a vent valve into a single valve assembly. The side vent outlet (not shown in photo) is plugged, allowing removal during maintenance, or the installation of a calibration fitting. The compact and economical EM50 features a threaded inlet and flanged outlet, allowing the transmitter to bolt directly to the manifold. The lightweight design requires two transmitter bolts permitting rapid assembly to the transmitter. Product Availability All valves are available with integral hard seats, 316-NACE stainless steel body and trim and Teflon or Graphite packing. Hastelloy C, Monel models (see order grid) available upon request. Ratings Stainless Steel with TFE Packing: 6000 psig @ 100 F (414 bar @ 38 C) 4200 psig @ 400 F (290 bar @ 204 C) 1/2" NPT (F) Port Process Side 11 5 8 6 3 4 88 (3.46") 7 2 9 Maximum Open Height 95 (3.74") 60 (2.36") Maximum Open Height 90 (3.54") 10 Groove 1.00" x 0.70" x 0.10" Deep Instrument Side Ø12.7 (0.5) Mounting Holes 2 Nos. 41 (1.63") 12 44 (1.75") 1 No. Description Material Qty 1 Body SS316/SS316 NACE 1 2 Gland Body SS316/SS316 NACE 2 3 Gland Retainer SS304 2 4 Gland Seal PTFE 4 5 Check Nut SS304 2 6 Spindle SS316/SS316 NACE 2 7 Trim SS316/SS316 NACE 2 8 Handle SS304 2 9 Washer SS 2 10 Lock Pin SS304 2 11 Dust Cap PVC 2 12 1/4" NPT Drain Plug SS316/SS316 NACE 1 Note: Other materials and options available 14

MODEL BODY CONFIG. BODY MAT'L SIZE SIZE STEM/TIP SEAT MAT'L PACKING EM50 1 D 3 3 9 9 3 1 2 MODEL EM50 Standard 10 9 Flanged 5 BODY 1 Hard Seat 6 BODY MATERIAL D 316SS-NACE H Hastelloy C M Monel 11 STEM/TIP 3 316-NACE/316-NACE B Monel/Monel D Hastelloy C/Hastelloy C 12 SEAT MATERIAL 1 Integral Seat 7 SIZE 13 PACKING 2 TFE 3 Graphite 8 3 FNPT 9 SIZE 9 Flanged Flow Schematic DRAIN 15

Guage Pressure Manifold Valves - EH72 TWO VALVE MANIFOLD: REMOTE MOUNT The EH72 is a compact remote mounted two valve manifold that functions as a shutoff and vent valve for static pressure instrumentation. Compared to traditional piping methods that use an arrangement of pipe nipples or tubing, Tees and hand valves, the EH72 Series provides an easy-to-install unit that performs the same function for less material and labor cost. The EH72 also reduces the number of threaded connections, resulting in fewer potential leak points. Product Availability All valves are available with integral hard seats, 316-NACE stainless steel body and trim and Teflon or Graphite packing. Hastelloy C, Monel models (see order grid) available upon request. Ratings Stainless Steel with TFE Packing: 6000 psig @ 100 F (414 bar @ 38 C) 4200 psig @ 400 F (290 bar @ 204 C) 8 1 1/2"NPT(F) Inlet 9 10 5 6 3 11 2 Off Ø5.5 Holes 63.5 30.0 28.5 50.8 Max. Open Height 200.0 No. Description Material Qty 1 Body SS316/SS316 NACE 1 2 Gland Body SS316/SS316 NACE 2 3 Gland Retainer SS304 2 4 Gland Seal PTFE 4 5 Check Nut SS304 2 6 Spindle SS316/SS316 NACE 2 7 Trim SS316/SS316 NACE 2 8 Handle SS304 2 9 Washer SS 2 10 Lock Pin SS304 2 11 Dust Cap PVC 2 12 1/4" NPT Drain Plug SS316/SS316 NACE 1 4 2 7 Note: Other materials and options available. 16

MODEL BODY CONFIG. BODY MAT'L SIZE SIZE STEM/TIP SEAT MAT'L PACKING EH72 1 D 3 3 9 9 3 1 2 MODEL EH72 Standard 10 1 FNPT 7 MNPT* 5 BODY 1 Hard Seat 6 BODY MATERIAL D 316SS-NACE H Hastelloy C M Monel 11 STEM/TIP 3 316-NACE/316-NACE B Monel/Monel D Hastelloy C/Hastelloy C 12 SEAT MATERIAL 1 Integral Seat 7 SIZE 8 3 FNPT 1 MNPT* 13 PACKING 2 TFE 3 Graphite *Consult factory for MNPT Dimensions 9 SIZE Flow Schematic DRAIN 17

Guage Pressure Manifold Valves - EH74 TWO VALVE MANIFOLD: DIRECT MOUNT The EH74 offers the same function as the EM50 but in a more compact, lighter weight package for your flanged gauge pressure transmitter installations. The EH74 is made from barstock with a ½ FNPT inlet connection and a single instrument flange outlet. Like it s three valve barstock cousin the EM53, this lighter weight valve is an ideal candidate for use on weight sensitive offshore production platforms, or FPSO installations. Product Availability All valves are available with integral hard seats, 316-NACE stainless steel body and trim and Teflon or Graphite packing. Hastelloy C, Monel models (see order grid) available upon request. Ratings Stainless Steel with TFE Packing: 6000 psig @ 100 F (414 bar @ 38 C) 4200 psig @ 400 F (290 bar @ 204 C) 8 11 6 1 10 Max. Open Height 148.0 75.0 5 7 3 4 2 9 12 Ø12.0 Holes, 2 PLCS. 41.3 70.0 32.0 1/2" NPT(F) Ø17.6xØ25.4x2.6 Deep Grove No. Description Material Qty 1 Body SS316/SS316 NACE 1 2 Gland Body SS316/SS316 NACE 2 3 Gland Retainer SS304 2 4 Gland Seal PTFE 4 5 Check Nut SS304 2 6 Spindle SS316/SS316 NACE 2 7 Trim SS316/SS316 NACE 2 8 Handle SS304 2 9 Washer SS 2 10 Lock Pin SS304 2 11 Dust Cap PVC 2 12 1/4" NPT Drain Plug SS316/SS316 NACE 1 Note: Other materials and options available 18

MODEL BODY CONFIG. BODY MAT'L SIZE SIZE STEM/TIP SEAT MAT'L PACKING EH74 1 D 3 3 9 9 3 1 2 MODEL EH74 Standard 10 9 Flanged 5 BODY 1 Hard Seat 6 BODY MATERIAL D 316SS-NACE H Hastelloy C M Monel 11 STEM/TIP 3 316-NACE/316-NACE B Monel/Monel D Hastelloy C/Hastelloy C 12 SEAT MATERIAL 1 Integral Seat 7 SIZE 13 PACKING 2 TFE 3 Graphite 8 3 FNPT 9 SIZE 9 Flanged Flow Schematic 19

Gauge Pressure Manifold Valves - EH79 TWO VALVE MANIFOLD: DIRECT MOUNT The EH79 offers the same function as the EM50 but in a more compact, lighter weight package for your flanged gauge pressure transmitter installations. The EH79 is made from barstock with a ½ FNPT inlet connection and a single instrument flange outlet. Like it s three valve barstock cousin the EM53, this lighter weight valve is an ideal candidate for use on weight sensitive offshore production platforms, or FPSO installations. Product Availability All valves are available with integral hard seats, 316-NACE stainless steel body and trim and Teflon or Graphite packing. Hastelloy C, Monel models (see order grid) available upon request. Ratings Stainless Steel with TFE Packing: 6000 psig @ 100 F (414 bar @ 38 C) 4200 psig @ 400 F (290 bar @ 204 C) 8 10 Ø12.7(0.50) Mounting Holes 2Nos. 1/2" NPT (F) Port Process Side 1 11 5 6 3 4 2 7 9 41,3 (1.63) 76,0 (2.99) Instrument side groove ØØ25.2 x 17.6 x 2.6 mmdeep 65,0 (2.56) Max. Open Height 140(5.50) 11,0 (0.43") 32,0 (1.26) 12 No. Description Material Qty 1 Body SS316/NACE 1 2 Gland Body SS316/NACE 2 3 Gland Retainer SS304 2 4 Gland Seal PTFE 4 5 Check Nut SS304 2 6 Spindle SS316/NACE 2 7 Trim SS316/NACE 2 8 Handle SS304 2 9 Washer SS 2 10 Lock Pin SS304 2 11 Dust Cap PVC 2 12 1/4" NPT Drain Plug SS316/NACE 1 Note: Other materials and options available 20

MODEL BODY CONFIG. BODY MAT'L SIZE SIZE STEM/TIP SEAT MAT'L PACKING EH79 1 D 3 3 9 9 3 1 2 MODEL EH79 Standard 10 9 Flanged 5 BODY 1 Hard Seat 6 BODY MATERIAL D 316SS-NACE H Hastelloy C M Monel 11 STEM/TIP 3 316-NACE/316-NACE B Monel/Monel D Hastelloy C/Hastelloy C 12 SEAT MATERIAL 1 Integral Seat 7 SIZE 13 PACKING 2 TFE 3 Graphite 8 3 FNPT 9 SIZE 9 Flanged Flow Schematic DRAIN 21

Differential Pressure Manifold Valves - EM53 THREE VALVE MANIFOLD: DIRECT MOUNT The EM53 is a three valve instrument manifold used to perform the block, equalizing and vent requirements of differential pressure transmitter applications. The EM53 has a single mounting flange allowing the transmitter to bolt directly to the manifold. A mounting kit may also be specified to allow for manifold installation to a pipe stand. Product Availability All valves are available with integral hard seats, 316-NACE stainless steel body and trim and Teflon or Graphite packing. Hastelloy C, Monel models (see order grid) available upon request. Ratings Stainless Steel with TFE Packing: 6000 psig @ 100 F (414 bar @ 38 C) 4200 psig @ 400 F (290 bar @ 204 C) Ø6.5 holes 2 Nos. (0.25") 20 (0.79") 33 (1.3") 1/2" NPT (F) Port Process Side 8 11 6 5 3 Max Open Height 232 (9.13") 12 60 (2.36") 10.0 10 1 7 4 2 9 Max Open Height 85 (3.35") 41.3 (1.63") 54 (2.13") 86 (3.39") Ø12.7 (0.5") mounting holes 4 Nos. Groove Ø25.2 x Ø17.0 x 2.6 Deep Instrument Side 2 Nos (1.0" x 0.67" x 0.10") 72 (2.83") No. Description Material Qty 1 Body SS316/NACE 1 2 Gland Body SS316/NACE 3 3 Gland Retainer SS304 3 4 Gland Seal PTFE 6 5 Check Nut SS304 3 6 Spindle SS316/NACE 3 7 Trim SS316/NACE 3 8 Handle SS304 3 9 Washer SS 3 10 Lock Pin SS304 3 11 Dust Cap PVC 3 12 Drain Plug 1/4" NPT SS316 2 Note: Other materials and options available 22

MODEL BODY CONFIG. BODY MAT'L SIZE SIZE STEM/TIP SEAT MAT'L PACKING EM53 1 D 3 3 9 9 3 1 2 MODEL EM53 Standard 10 9 Flanged 5 BODY 1 Hard Seat 6 BODY MATERIAL D 316SS-NACE H Hastelloy C M Monel 11 STEM/TIP 3 316-NACE/316-NACE B Monel/Monel D Hastelloy C/Hastelloy C 12 SEAT MATERIAL 1 Integral Seat 7 SIZE 13 PACKING 2 TFE 3 Graphite 8 3 FNPT 9 SIZE 9 Flanged Flow Schematic DRAIN DRAIN 23

Differential Pressure Manifold Valves - EM54 THREE VALVE MANIFOLD: DIRECT MOUNT (DOUBLE FLANGED) The EM54 is a double flanged instrument manifold that is used to perform the block, equalizing and vent requirements of differential pressure transmitters. For compact, close-coupled installations, the manifold bolts directly to the instrument and can be mated directly to the orifice flange using futbol flanges and short nipples. For remote installation, flange adaptors (futbols) can be used, making the installation similar to the EM53. Product Availability All valves are available with integral hard seats, 316-NACE stainless steel body and trim and Teflon or Graphite packing. Hastelloy C, Monel models (see order grid) available upon request. Ratings Stainless Steel with TFE Packing: 6000 psig @ 100 F (414 bar @ 38 C) 4200 psig @ 400 F (290 bar @ 204 C) Groove Ø17.0 (0.67") x 2.0 (0.07") Deep Process Side 2 Nos. No. Description Material Qty 1 Body SS316/NACE 1 2 Gland Body SS316/NACE 3 3 Gland Retainer SS304 3 4 Gland Seal PTFE 6 5 Check Nut SS304 3 6 Spindle SS316/NACE 3 7 Trim SS316/NACE 3 8 Handle SS304 3 9 Washer SS 3 10 Lock Pin SS304 3 11 Dust Cap PVC 3 12 Drain Plug 1/4" NPT SS316/NACE 3 Note: Other materials and options available 12 Max Open Height 223.5 (9.13") 8 Groove Ø25.2 x Ø17.6x2.6 Deep Instrument side 2 nos.(1.0"x0.67"x0.10") 10 11 11 6 60 (2.362") 5 3 4 54.0 (2.125") 86 (3.385") Ø12.5 (0.5") Mounting Hole 4 Nos. 86 (3.385") 7/16"x20UNF Tapping 4 Nos. 7 2 9 24

MODEL BODY CONFIG. BODY MAT'L SIZE SIZE STEM/TIP SEAT MAT'L PACKING EM54 1 D 9 9 9 9 3 1 2 MODEL EM54 Standard 10 9 Flanged 5 BODY 1 Hard Seat 6 BODY MATERIAL D 316SS-NACE H Hastelloy C M Monel 11 STEM/TIP 3 316-Nace/316-NACE B Monel/Monel D Hastelloy C/Hastelloy C 12 SEAT MATERIAL 1 Integral Seat 7 SIZE 9 Flanged 13 PACKING 2 TFE 3 Graphite 8 9 Flanged 9 SIZE 9 Flanged Flow Schematic DRAIN DRAIN 25

Differential Pressure Manifold Valves - EM45 THREE VALVE MANIFOLD: REMOTE MOUNT, THREADED The EM45 is a general purpose instrument manifold designed for connecting differential pressure transmitters or flow recorders to impulse line tubing. Connections are 1/2" FNPT on industry standard 2-1/8" (54mm) center-to-center dimensions. Product Availability All valves are available with integral hard seats, 316-NACE stainless steel body and trim and Teflon or Graphite packing. Hastelloy C, Monel models (see order grid) available upon request. Ratings Stainless Steel with TFE Packing: 6000 psig @ 100 F (414 bar @ 38 C) 4200 psig @ 400 F (290 bar @ 204 C) 1/2" NPT (F) Port Process Side 8 Ø6.5 (0.26") holes 20.0 (0.787") Max Open Height 2.32 (9.13") 1/2" NPT (F) Port Instrument Side 11 5 6 3 4 2 Max Open Height 85 (3.35") 10 1 7 9 54 (2.13") 86 (3.39") 32 (1.26") 62 (2.44") No. Description Material Qty 1 Body SS316/NACE 1 2 Gland Body SS316/NACE 3 3 Gland Retainer SS304 3 4 Gland Seal PTFE 6 5 Check Nut SS304 3 6 Spindle SS316/NACE 3 7 Trim SS316/NACE 3 8 Handle SS304 3 9 Washer SS 3 10 Lock Pin SS304 3 11 Dust Cap PVC 3 Note: Other materials and options available 26

MODEL BODY CONFIG. BODY MAT'L SIZE SIZE STEM/TIP SEAT MAT'L PACKING EM45 1 D 3 3 3 1 3 1 2 MODEL EM45 Standard 10 1 FNPT 5 BODY 1 Hard Seat 6 BODY MATERIAL D 316SS-NACE H Hastelloy C M Monel 11 STEM/TIP 3 316-NACE/316-NACE B Monel/Monel D Hastelloy C/Hastelloy C 12 SEAT MATERIAL 1 Integral Seat 7 SIZE 8 3 FNPT 13 PACKING 2 TFE 3 Graphite Note: Inlet and Outlet must be same size 9 SIZE Flow Schematic 27

Differential Pressure Manifold Valves - EH33 THREE VALVE MANIFOLD: DIRECT MOUNT, BAR STOCK STYLE The EH33 is a three valve instrument manifold used to perform the block and equalizing requirement of differential pressure transmitter applications. Of importance in this design, is the inclusion of a single mounting flange in its compact barstock construction. A mounting kit may also be specified to allow for installation to a pipe stand. Product Availability All valves are available with integral hard seats, 316-NACE stainless steel body and trim and Teflon or Graphite packing. Hastelloy C, Monel models (see order grid) available upon request. Ratings Stainless Steel with TFE Packing: 6000 psig @ 100 F (414 bar @ 38 C) 4200 psig @ 400 F (290 bar @ 204 C) 8 1/2" NPT (F) Port Process Side 2Nos. 10 11 6 5 3 Max Open Height 250 (9.84") 76.0 (2.99") 4 2 1 32.0 (1.25") 7 9 Ø12.7 (0.5") Mounting Holes 4Nos. 41.3 (1.63") 30.0 (1.18") M10 Tapping 54(2.13) 2Nos. 108 (4.25") Groove Ø25.2 x Ø17.0 x 2.6 Deep Instrument Side 2Nos. No. Description Material Qty 1 Body SS316/NACE 1 2 Gland Body SS316/NACE 3 3 Gland Retainer SS304 3 4 Gland Seal PTFE 6 5 Check Nut SS304 3 6 Spindle SS316/NACE 3 7 Trim SS316/NACE 3 8 Handle SS304 3 9 Washer SS 3 10 Lock Pin SS304 3 11 Dust Cap PVC 3 Note: Other materials and options available 28

MODEL BODY CONFIG. BODY MAT'L SIZE SIZE STEM/TIP SEAT MAT'L PACKING EH33 1 D 3 3 9 9 3 1 2 MODEL EH33 Standard 10 9 Flanged 5 BODY 1 Hard Seat 6 BODY MATERIAL D 316SS-NACE H Hastelloy C M Monel 11 STEM/TIP 3 316-NACE/316-NACE B Monel/Monel D Hastelloy C/Hastelloy C 12 SEAT MATERIAL 1 Integral Seat 7 SIZE 13 PACKING 2 TFE 3 Graphite 8 3 FNPT 9 SIZE 9 Flanged Flow Schematic 29

Differential Pressure Manifold Valves - EH34 THREE VALVE MANIFOLD: DIRECT MOUNT, BAR STOCK STYLE The EH34 is a three valve instrument manifold used to perform the block and equalizing requirement of differential pressure transmitter applications. Of importance in this design, is the inclusion of a single mounting flange in its compact barstock construction. A mounting kit may also be specified to allow for installation to a pipe stand. Product Availability All valves are available with integral hard seats, 316-NACE stainless steel body and trim and Teflon or Graphite packing. Hastelloy C, Monel models (see order grid) available upon request. Ratings Stainless Steel with TFE Packing: 6000 psig @ 100 F (414 bar @ 38 C) 4200 psig @ 400 F (290 bar @ 204 C) Max. Open Height 275.0 Ø12.0 Holes, 4PLCS. Groove Ø25.2 X 17.0 X 2.6 Deep Instrument Side 54.0 8 10 11 5 6 3 4 Process Side 1/2" NPT (F) 1 38.0 80.0 140.0 M10x1.5 Tapping 2 PLCS 80.0 7 No. Description Material Qty 1 Body SS316/NACE 1 2 Gland Body SS316/NACE 3 3 Gland Retainer SS304 3 4 Gland Seal PTFE 6 5 Check Nut SS304 3 6 Spindle SS316/NACE 3 7 Trim SS316/NACE 3 8 Handle SS304 3 9 Washer SS 3 10 Lock Pin SS304 3 11 Dust Cap PVC 3 Note: Other materials and options available 2 9 32.0 Max. Open Height 107.0 30

MODEL BODY CONFIG. BODY MAT'L SIZE SIZE STEM/TIP SEAT MAT'L PACKING EH34 1 D 3 3 9 9 3 1 2 MODEL EH34 Standard 10 9 Flanged 5 BODY 1 Hard Seat 6 BODY MATERIAL D 316SS-NACE H Hastelloy C M Monel 11 STEM/TIP 3 316-NACE/316-NACE B Monel/Monel D Hastelloy C/Hastelloy C 12 SEAT MATERIAL 1 Integral Seat 7 SIZE 13 PACKING 2 TFE 3 Graphite 8 3 FNPT 9 SIZE 9 Flanged Flow Schematic 31

Differential Pressure Manifold Valves - EH35 THREE VALVE MANIFOLD: REMOTE MOUNT, THREADED The EH35 is a general purpose instrument manifold designed for connecting differential pressure transmitters or flow recorders to impulse line tubing. Connections are 1/2" FNPT on industry standard 2-1/8" (54mm) center-to-center dimensions. Product Availability All valves are available with integral hard seats, 316-NACE stainless steel body and trim and Teflon or Graphite packing. Hastelloy C, Monel models (see order grid) available upon request. Ratings Stainless Steel with TFE Packing: 6000 psig @ 100 F (414 bar @ 38 C) 4200 psig @ 400 F (290 bar @ 204 C) Max. Open Height 270.0 8 10 5 6 3 9 1 2 Off Ø8.5 MTG Holes 2 Off 1/2" NPT (F) Inlet Side Max. Open Height 102.0 28.5 63.5 Max. Open Height 110.0 4 2 7 47.6 54.0 80.0 120.0 11 2 Off 1/2" NPT(F) Outlet Side No. Description Material Qty 1 Body SS316/NACE 1 2 Gland Body SS316/NACE 3 3 Gland Retainer SS304 3 4 Gland Seal PTFE 6 5 Check Nut SS304 3 6 Spindle SS316/NACE 3 7 Trim SS316/NACE 3 8 Handle SS304 3 9 Washer SS 3 10 Lock Pin SS304 3 11 Dust Cap PVC 3 Note: Other materials and options available 32

MODEL BODY CONFIG. BODY MAT'L SIZE SIZE STEM/TIP SEAT MAT'L PACKING EH35 1 D 3 3 9 9 3 1 2 MODEL EH35 Standard 10 1 FNPT 5 BODY 1 Hard Seat 6 BODY MATERIAL D 316SS-NACE H Hastelloy C M Monel 11 STEM/TIP 3 316-NACE/316-NACE B Monel/Monel D Hastelloy C/Hastelloy C 12 SEAT MATERIAL 1 Integral Seat 7 SIZE 13 PACKING 2 TFE 3 Graphite 8 3 FNPT 9 SIZE Flow Schematic DRAIN DRAIN 33

Differential Pressure Manifold Valves - EM57 FIVE VALVE MANIFOLD: REMOTE MOUNT DOUBLE EQUALIZER DESIGN The EM57 five valve manifold combines two shutoff valves, two equalizing valves, and a vent/calibration valve into a single, compact assembly. The double equalizing arrangement insures against measurement error that can occur from equalizer leakage between high and low pressure connections, making the EM57 ideal for custody transfer applications. When expensive liquid or gas changes ownership, precise measurement is critical. The smallest leakage from the high side of the manifold to the low side of the manifold can lead to lost revenue due to inaccurate measurement. Therefore, when dealing with custody transfer or other critical flows, a five valve manifold should be used to achieve more accurate measurement. Product Availability All valves are available with integral hard seats, 316-NACE stainless steel body and trim and Teflon or Graphite packing. Hastelloy C, Monel models (see order grid) available upon request. 8 Ratings Stainless Steel with TFE Packing: 6000 psig @ 100 F (414 bar @ 38 C) 4200 psig @ 400 F (290 bar @ 204 C) Ø6.5 (0.25") Holes 2 Nos. 1/2" NPT (F) Port Instrument Side 2 Nos. 11 5 7 6 3 4 2 9 26 25 (0.98") Max Open Height 236 (9.3") 1/2" NPT (F) Port Process Side 2 Nos. 10 32 (1,26") 1 No. Description Material Qty 1 Body SS316/NACE 1 2 Gland Body SS316/NACE 5 3 Gland Retainer SS304 5 4 Gland Seal PTFE 10 5 Check Nut SS304 5 6 Spindle SS316/NACE 5 7 Trim SS316/NACE 5 8 Handle SS304 5 9 Washer SS 5 10 Lock Pin SS304 5 11 Dust Cap PVC 5 12 Drain Plug 1/4" NPT SS316/NACE 1 Note: Other materials and options available 54 (2.13) 86 (3.39") 12 73 (2.87") 34

MODEL BODY CONFIG. BODY MAT'L SIZE SIZE STEM/TIP SEAT MAT'L PACKING EM57 1 D 3 3 3 1 3 1 2 MODEL EM57 Standard 10 1 FNPT 5 BODY 1 Hard Seat 6 BODY MATERIAL D 316SS-NACE H Hastelloy C M Monel 11 STEM/TIP 3 316-NACE/316-NACE B Monel/Monel D Hastelloy C/Hastelloy C 12 SEAT MATERIAL 1 Integral Seat 7 SIZE 13 PACKING 2 TFE 3 Graphite 8 3 FNPT 9 SIZE Flow Schematic VENT/TEST DRAIN 35

Differential Pressure Manifold Valves - EM74 FIVE VALVE MANIFOLD: REMOTE MOUNT SINGLE EQUALIZER DESIGN The EM74 is similar to the EM57 but is designed with two vent valves and one equalizer. The two vent valves can be used for transmitter calibration and venting. This can be a convenient feature if the transmitter is located in a difficult to access place. Product Availability All valves are available with integral hard seats, 316-NACE stainless steel body and trim and Teflon or Graphite packing. Hastelloy C, Monel models (see order grid) available upon request. Ratings Stainless Steel with TFE Packing: 6000 psig @ 100 F (414 bar @ 38 C) 4200 psig @ 400 F (290 bar @ 204 C) Max. Open Height 248 (9.76") 1/2" NPT (F) Port Process Side 8 11 3 5 6 40 (1.57") 20 (0.79") 18 (0.71) 1/2" NPT (F) Port Instrument Side 0.25" Holes 7 4 2 9 54(2.13") 100 (3.94") 10 1 32 (1.26") 75 (2.95") Max Open Height 125 (4.92") No. Description Material Qty 1 Body SS316/NACE 1 2 Gland Body SS316/NACE 5 3 Gland Retainer SS304 5 4 Gland Seal PTFE 10 5 Check Nut SS304 5 6 Spindle SS316/NACE 5 7 Trim SS316/NACE 5 8 Handle SS304 5 9 Washer SS 5 10 Lock Pin SS304 5 11 Dust Cap PVC 5 12 Drain Plug 1/4" NPT SS316/NACE 2 Note: Other materials and options available 36

MODEL BODY CONFIG. BODY MAT'L SIZE SIZE STEM/TIP SEAT MAT'L PACKING EM74 1 D 3 3 3 1 3 1 2 MODEL EM74 Standard 10 1 FNPT 5 BODY 1 Hard Seat 6 BODY MATERIAL D 316SS-NACE H Hastelloy C M Monel 11 STEM/TIP 3 316-NACE/316-NACE B Monel/Monel D Hastelloy C/Hastelloy C 12 SEAT MATERIAL 1 Integral Seat 7 SIZE 13 PACKING 2 TFE 3 Graphite 8 3 FNPT 9 SIZE Flow Schematic DRAIN DRAIN 37

Differential Pressure Manifold Valves -EH37 FIVE VALVE MANIFOLD: BARSTOCK DIRECT MOUNT SINGLE EQUALIZER DESIGN The EH37 is similar to the EM74 in function, but is designed for direct mounting to the transmitter with a threaded inlet and instrument flanged outlet. The unique, compact barstock design makes this an economical choice when a direct mount manifold with vent and calibration access is crucial. Product Availability All valves are available with integral hard seats, 316-NACE stainless steel body and trim and Teflon or Graphite packing. Hastelloy C, Monel models (see order grid) available upon request. Ratings Stainless Steel with TFE Packing: 6000 psig @ 100 F (414 bar @ 38 C) 4200 psig @ 400 F (290 bar @ 204 C) 1/2" NPT (F) Port Process Side Max. Open Height 295.0 (11.61) No. Description Material Qty 1 Body SS316/NACE 1 2 Gland Body SS316/NACE 5 3 Gland Retainer SS304 5 4 Gland Seal PTFE 10 5 Check Nut SS304 5 6 Spindle SS316/NACE 5 7 Trim SS316/NACE 5 8 Handle SS304 5 9 Washer SS 5 10 Lock Pin SS304 5 11 Dust Cap PVC 5 12 Drain Plug 1/4" NPT SS316/NACE 2 Note: Other materials and options available Groove Ø25.2 x Ø17.6 x 2.6 Deep Instrument Side 2 Nos (1.00"x0.67"x0.10") 10 8 Ø12,7 (0.5") Mounting Holes 4 Nos. 41.3 (1.63) 145 30,0 (5.71) (1.18) 54 (2.13) 75 (2.95) 1 76 (2.99") 32 (1.25) 12 11 5 6 3 4 2 7 9 38

MODEL BODY CONFIG. BODY MAT'L SIZE SIZE STEM/TIP SEAT MAT'L PACKING EH37 1 D 3 3 9 9 3 1 2 MODEL EH37 Standard 10 9 Flanged 5 BODY 1 Hard Seat 6 BODY MATERIAL D 316SS-NACE H Hastelloy C M Monel 11 STEM/TIP 3 316-NACE/316-NACE B Monel/Monel D Hastelloy C/Hastelloy C 12 SEAT MATERIAL 1 Integral Seat 7 SIZE 13 PACKING 2 TFE 3 Graphite 8 3 FNPT 9 SIZE 9 Flanged Flow Schematic DRAIN DRAIN 39

Differential Pressure Manifold Valves - EH38 FIVE VALVE MANIFOLD: BARSTOCK DIRECT MOUNT SINGLE EQUALIZER DESIGN The EH38 is similar to the EM74 in function, but is designed for direct mounting to the transmitter with a threaded inlet and instrument flanged outlet. The unique, compact barstock design makes this an economical choice when a direct mount manifold with vent and calibration access is crucial. Product Availability All valves are available with integral hard seats, 316-NACE stainless steel body and trim and Teflon or Graphite packing. Hastelloy C, Monel models (see order grid) available upon request. Ratings Stainless Steel with TFE Packing: 6000 psig @ 100 F (414 bar @ 38 C) 4200 psig @ 400 F (290 bar @ 204 C) 8 Ø12.0 Holes, 4PLCS. Groove Ø25.2 X Ø17.0 X 2.6 Deep Instrument Side 54.0 1 11 5 4 6 3 7 2 9 80.0 Process Side 1/2" NPT(F) 38.0 80.0 10 115.0 140.0 Max. Open Height 290.0 M101.5 Tapping 2 PLCS Max. Open Height 107.0 32.0 No. Description Material Qty 1 Body SS316/NACE 1 2 Gland Body SS316/NACE 3 3 Gland Retainer SS304 3 4 Gland Seal PTFE 6 5 Check Nut SS304 3 6 Spindle SS316/NACE 3 7 Trim SS316/NACE 3 8 Handle SS304 3 9 Washer SS 3 10 Lock Pin SS304 3 11 Dust Cap PVC 3 Note: Other materials and options available 40

MODEL BODY CONFIG. BODY MAT'L SIZE SIZE STEM/TIP SEAT MAT'L PACKING EH38 1 D 3 3 9 9 3 1 2 MODEL EH38 Standard 10 9 Flanged 5 BODY 1 Hard Seat 6 BODY MATERIAL D 316SS-NACE H Hastelloy C M Monel 11 STEM/TIP 3 316-NACE/316-NACE B Monel/Monel D Hastelloy C/Hastelloy C 12 SEAT MATERIAL 1 Integral Seat 7 SIZE 13 PACKING 2 TFE 3 Graphite 8 3 FNPT 9 SIZE 9 Flanged Flow Schematic DRAIN DRAIN 41

Differential Pressure Manifold Valves - EH39 FIVE VALVE MANIFOLD: BARSTOCK DIRECT MOUNT SINGLE EQUALIZER DESIGN The EH39 is similar to the EM74 in function, but is designed for direct mounting to the transmitter with a threaded inlet and instrument flanged outlet. The unique, compact barstock design makes this an economical choice when a direct mount manifold with vent and calibration access is crucial. Product Availability All valves are available with integral hard seats, 316-NACE stainless steel body and trim and Teflon or Graphite packing. Hastelloy C, Monel models (see order grid) available upon request. Ratings Stainless Steel with TFE Packing: 6000 psig @ 100 F (414 bar @ 38 C) 4200 psig @ 400 F (290 bar @ 204 C) Process side 1/2"NPT(F). 2PLCS. Ø12.0 Holes, 4 PLCS. 1 Groove Ø17.6 x Ø25.4 x 2.6 Deep Instrument Side Ø12.7 8 30.0 54.0 108.0 155.0 Max. Open Height 305.0 12 13.0 40.0 60.0 No. Description Material Qty 1 Body SS316/NACE 1 2 Gland Body SS316/NACE 3 3 Gland Retainer SS304 3 4 Gland Seal PTFE 6 5 Check Nut SS304 3 6 Spindle SS316/NACE 3 7 Trim SS316/NACE 3 8 Handle SS304 3 9 Washer SS 3 10 Lock Pin SS304 3 11 Dust Cap PVC 3 Note: Other materials and options available 11 5 7 6 3 4 2 9 42

MODEL BODY CONFIG. BODY MAT'L SIZE SIZE STEM/TIP SEAT MAT'L PACKING EH39 1 D 3 3 9 9 3 1 2 MODEL EH39 Standard 10 9 Flanged 5 BODY 1 Hard Seat 6 BODY MATERIAL D 316SS-NACE H Hastelloy C M Monel 11 STEM/TIP 3 316-NACE/316-NACE B Monel/Monel D Hastelloy C/Hastelloy C 12 SEAT MATERIAL 1 Integral Seat 7 SIZE 13 PACKING 2 TFE 3 Graphite 8 3 FNPT 9 SIZE 9 Flanged Flow Schematic DRAIN DRAIN 43

Manifold Mounting Brackets MB001-316SS MOUNTING BRACKET FOR MODELS EM53, EM45 & EM74; INCLUDES 2 SS U-BOLTS & FASTENERS 3,0 (0.12") 20 (0.78") 46,0 (1.81") Radius to suit 2.0" NB Pipe 6.5 drill 2 Nos. 82,0 (3.22") 48,5 (1.90") 8,5 (0.33") Drill 4 Nos.l 68,5 (2.70)" 92,0 (3.62") MB002-316SS MOUNTING BRACKET FOR MODELS EH37; INCLUDES 2 SS U-BOLTS & FASTENERS R8.5 (0.33") 3,0 (0.12") 7,0 (0,67") 20,5 (0.80") 46,0 (1.81") Radius to suit 2.0" NB Pipe 12,0 (0.472") Drill 2 Nos 84,0 (3.30") 48,5 (1.90") 8,5 (0.33") Drill 4 Nos 69,0 (2.71)" 92,0 (3.62") OVAL FLANGE ADAPTOR 10007-030-147 A 1,57(0.062") OFFSET 26,7 (1.05") 10,0 (0.395") THRU 9,7 (0.383" (2-PL) TAP 7/16-20UNF THRU (2-PL) 32,8 (1.292") A 31,9 (1.255") 31,6 (1.245") 63,8 (2.510") 63,2 (2.490") 31,8 (1.250") STOCK 31,8 (1.250") STOCK MACH PER 2514-4" (1/2" FNPT) (ON OFFSET SHOWN) 12,0 (ø0.472") THRU 16,0 (0.630") (15,7 (0.620") 11,2 (0.440") 11,0 (0.434") 41,5 (1.635") 41,0 (1.615") 20,3 (0.800") SECTION A-A EM/0818 44

2024 © autodocbox.com Privacy Policy | Terms of Service | Feedback