KP100 TJ3 RIG-SAFE Containerized unit
KP100TJ3- UHD-S One (1) JETECH Model 100TJ3-UH Triplex Bare Shaft Pump with JETECH AD-2 Liquid End Liquid end pressure rating (maximum): 2,760 Bar (40,000 psi) Liquid end type: Jetech AD-2 Ultra-High pressure Ultra-easy field maintenance liquid end (service packing and valves in as little as 15 minutes) Stainless steel materials Plunger Type: Tungsten Carbide Power frame lubrication: Pressurized Power frame cooling: Lubrication oil heat exchanger cooled Power frame type: Triplex plunger Speed reduction type: Double helical gear reduction built into power frame Final reduction ratio: 3.68 Maximum input power: 108 HP (80 kw)
Service kit Set plungers 12 months service kits on pump worked on 250 hour intervals Includes packing, seals, o-rings, back up rings, consumables Cummins Tier 3 industrial diesel engine power unit model QSB4.5 Soft start Turbo charged and intercooled Includes the latest in engine monitoring and safety Electronic dial throttle for precise adjustment Fitted with spark arrestor and Chalwyn valve Engine mounted compressor for pneumatic pressure regulator Pneumatic Pressure Regulating Device Pressure Regulating, Safety, Unloading, Close 12 months service kit Pneumatic Pressure Regulating Device Control panel (securable) located away from high pressure connections for enhanced safety Pneumatic System Second compressor belt driven from engine for air rotating gun Including Pneumatic Triplet, Magnetic Exchange Valve, Pressure Gauge, Hoses, Connectors and drying system Option to connect an external airline for painting, cleaning etc Pump Protection Package protecting the unit by monitoring the pump system through a series of sensors and safely shuts down the system before damage occurs.
Low water level in inlet tank Low inlet water pressure to High Pressure Pump Low Power Frame oil pressure High Power Frame oil temperature Direct Connected Flexible Coupling Connecting PTO and pump pinion shafts Coupling guard 40-gallon (150-liter) Diesel Fuel Tank 12-gal Steel construction. Eight-hour minimum run time Easy read level gauge Fused fill cap Pressure Gauge liquid-filled Easy-read dial face Anti-vibration Pressure Discharge System Control Pneumatic Pressure Regulator valve Safety Rupture Disc over-pressure protection system Electric shut off valve system Recirculates water back to tank when dumping, single gun operation only Suction water supply tank 50-gallon (190-liter) mounted over pump Ensuring supply is free of air (a high pressure pumps worst enemy) Level control by float valve Y Strainer filter on filler pipe
Centrifugal charge pump Ensuring consistent inlet pressure to high pressure pump Belt driven from engine Bag filter unit Aircraft aluminium construction 5-micron filter bag Isolation valve Pressure gauge before and after filter for quick monitoring of filter fouling Stainless steel double suction system Double feed slows the water in the plumbing reducing turbulence Stainless steel after the filter to help prevent contamination Plunger cooling water manifold Flow control valve for easy adjustment Cooling the plungers greatly increases packing life Power-end lube oil cooler Water to oil type heat exchanger Allowing extreme conditions Increasing bearing and component life Fabricated galvanised skid Heavy duty structural steel construction Mounted inside container Painted container Industrial epoxy paint Colour: White
PARKER HOSE WITH FITTINGS TO MATCH 3x 20m 40K 5mm id 10x Hose couplers 10x Whip checks 10x Spare hose fittings 3x 20m 10mm airline hose 3x 20m 6mm airline hose 1x 10 piece airline hose fitting kit Air rotating gun with spares 5 Sapphire nozzle carrier 1 Sapphire nozzle 15 offset head carrier.
Service kits Swivel shaft, Spacer & Bearings Swivel Seal Assembly Back up ring assembly Brass Button Timing Belt for handgun Nozzle Kit 20 Saffire Nozzles UHP SAFETY SUITS COMPLETE
Includes (1) Jacket, (1) Bib and (1) Gaiter Set