Bohle SlideTec Optima 150 Sliding Door Systems www.bohle-america.com
LEGEND FOR SLIDING By-parting Application types Single panel Pocket door Door mounting / Installation types Wall mounted / Barn Door Single panel Surface mounted / exposed Single panel Recessed in ceiling / header Single panel / Pocket door application Single panel with fixed glazing Single panel with fixed glazing Max. door weight Max. capacity per door Type of glass Hardware attributes Tempered safety glass 3/8-1/2 (10-12.7 mm) Finishes Anodized aluminum (US28) Stainless steel effect, satin (US32D) Soft close One way soft-close Two way soft-close 2 Metric specifications are exact inches are approximate
Product benefits: Simple retrofitting of soft close. Sophisticated clamping technology no glass processing required with tempered glass Adjustment of the door simple and easy from the front Minimal distance from wall Small door widths for soft close One-piece bottom guide for all glass thicknesses Ceiling mounting Tempered glass 3/8 1/2 (10 12.7mm) Wall mounting lb up to 330 lbs (150 kg) Single door Aluminium look Double doors Soft close / soft open Fixed sidelight T +1 877 678 2021 (toll free) F +1 877 678 2022 (toll free) info@bohle-america.com www.bohle-america.com Stainless steel look 3
Optima 150 Sliding door hardware for exposed ceiling mounting applications FASCIA TOP TRACK FITTING SET GLASS SLIDING FLOOR GUIDE FINISHED FLOOR 2 9 16" [65.7mm] 2 3 4" [70mm] ~1 5 16" [32.6mm] EXTERIOR ~ 13 16" [20.4mm] +/- 1/8" ROOM INTERIOR 1 5 16" [33mm] 1" [25mm] FINISHED CEILING / TOP OF TRACK 1 3 8" [35mm] SLIDING GLASS HEIGHT (SPGH) = (SH - 1 3 4") SYSTEM HEIGHT (SH) * Maximum weight capacity, 330 lbs. (150 kg.) per sliding panel * Glass type / thickness: * Monolithic tempered 3/8" (10 mm), 1/2" (12.7 mm) no glass holes or notches required * German manufactured * Ceiling mounted * Pre-packaged kits for simple order processing * Single, Bi-parting and synchronized sliding door options * Optional accessories available: * Additional sliding door fitting kits, see page 8 * Soft-close kits, see page 7 * Synchronization kits, see page 8 * Architectural pulls and handles, see page 11 * Butt glazing gaskets, see page 13-18 * Kits consist of: Top track, fascia cover, (1) sliding door fitting set and bottom guide 3 8" [10mm] BO 5101553N BO 5214155N BO 5101559N BO 5214156N Desription Optima 150 complete sliding door kit. Clg-mt. 98-7/16" (2.5m) Clear Anodized for (1) sliding door Optima 150 complete sliding door kit. Clg-mt. 157-1/2" (4m) Clear Anodized for (1) sliding door Optima 150 complete sliding door kit. Clg-mt. 98-7/16" (2.5m) Stainless Steel Effect for (1) sliding door Optima 150 complete sliding door kit. Clg-mt. 157-1/2" (4m) Stainless Steel Effect for (1) sliding door CEILING MOUNTED RECESSED TRACK - SLIDING Optima 150 Sliding door hardware for recessed ceiling mounting applications FASCIA TOP TRACK FITTING SET GLASS SLIDING FLOOR GUIDE 2 3 4" [70mm] FINISHED FLOOR 7 8" [22.2mm] 2 9 16" [65.7mm] ~ 1 5 16" [32.6mm] EXTERIOR TOP OF TRACK FINISHED CEILING ~ 13 16" [20.3mm] +/- 1/8" ROOM INTERIOR 1 5 16" [33mm] 1" [25mm] SLIDING GLASS HEIGHT (SPGH) = (SH - 1 3 4") 1 3 8" [35mm] SYSTEM HEIGHT (SH) * Maximum weight capacity, 330 lbs. (150 kg.) per sliding panel * Glass type / thickness * Monolithic tempered 3/8" (10mm), 1/2" (12.7mm) no glass holes or notches required * German manufactured * Ceiling mounted * Pre-packaged kits for simple order processing * Single, Bi-parting and synchronized sliding door options * Optional accessories available: * Additional sliding door fitting kits, see page 8 * Soft-close kits, see page 7 * Synchronization kits, see page 8 * Architectural pulls and handles, see page 11 * Butt glazing gaskets, see page 13-18 * Kits consist of: Top track, fascia cover, (1) sliding door fitting set and bottom guide 3 8" [10mm] BO 5101553N BO 5214155N BO 5101559N BO 5214156N Desription Optima 150 complete sliding door kit. Clg-mt. 98-7/16" (2.5m) Clear Anodized for (1) sliding door Optima 150 complete sliding door kit. Clg-mt. 157-1/2" (4m) Clear Anodized for (1) sliding door Optima 150 complete sliding door kit. Clg-mt. 98-7/16" (2.5m) Stainless Steel Effect for (1) sliding Optima 150 complete sliding door kit. Clg-mt. 157-1/2" (4m) Stainless Steel Effect for (1) sliding door 4 Metric specifications are exact inches are approximate
Optima 150 Sliding door hardware for wall mounting applications 2 9 16" [65.7mm] FASCIA FITTING SET GLASS SLIDING FLOOR GUIDE FINISHED FLOOR 2 3 4" [70mm] ~ 1 5 16" [32.6mm] EXTERIOR ~ 13 16" [20.3mm] +/- 1/8" ROOM INTERIOR 1 5 16" [33mm] 1" [25mm] SLIDING GLASS HEIGHT (SPGH) = (SH - 1 3 4") 1 3 8" [35mm] SYSTEM HEIGHT (SH) * Maximum weight capacity, 330 lbs. (150 kg.) per sliding panel * Glass type / thickness * Monolithic tempered 3/8" (10mm), 1/2" (12.7mm) no glass holes or notches required * German manufactured * Wall mounted * Pre-packaged kits for simple order processing * Single, Bi-parting and synchronized sliding door options * Optional accessories available: * Additional sliding door fitting kits, see page 8 * Soft-close kits, see page 7 * Synchronization kits, see page 8 * Architectural pulls and handles, see page 11 * Butt glazing gaskets, see page 13-18 * Kits consist of: Top track, fascia cover, (1) sliding door fitting set and bottom guide 3 8" [10mm] BO 5101554N BO 5214150N BO 5101560N BO 5214151N Length Finish Optima 150 complete sliding door kit. wall-mt. 98-7/16" (2.5m) Clear Anodized for (1) sliding door Optima 150 complete sliding door kit. wall-mt. 157-1/2" (4m) Clear Anodized for (1) sliding door Optima 150 complete sliding door kit. wall-mt. 98-7/16" (2.5m) Stainless Steel Effect for (1) sliding door Optima 150 complete sliding door kit. wall-mt. 157-1/2" (4m) Stainless Steel Effect for (1) sliding door CEILING MOUNTED EXPOSED TRACK - SLIDING + FIXED S Optima 150 Sliding door hardware for exposed ceiling mounting applications with fixed panels 1 3 8" [35mm] SYSTEM HEIGHT (SH) SLIDING GLASS HEIGHT (SPGH) = (SH - 1 3 4" [44.45mm]) 3 8" [10mm] FINISHED CEILING / TOP OF TRACK FASCIA FITTING SET TOP TRACK ~1 5 16" [32.6mm] GLASS SLIDING GLASS FIXED 3/8" SETTING BLOCK U-CHANNEL FLOOR GUIDE 1" [25mm] +/- 1/8" EXTERIOR 3 3 8" [85.2mm] 2 3 4" [70mm] ~ 7 8" [21.7mm] ROOM INTERIOR FIXED GLASS HEIGHT (FPGH) = (SH - 2" [50.8mm]) 1" [25.4mm] 1 1 2" [38mm] 1 2" [12.7mm] * Maximum weight capacity, 330 lbs. (150 kg.) per sliding panel * Glass type / thickness * Monolithic tempered 3/8" (10mm), 1/2" (12.7mm) no glass holes or notches required * German manufactured * Ceiling mounted * Pre-packaged kits for simple order processing * Single, Bi-parting and synchronized sliding door options * Optional accessories available: * Additional sliding door fitting kits, see page 8 * Soft-close kits, see page 7 * Synchronization kits, see page 8 * Architectural pulls and handles, see page 11 * Butt glazing gaskets, see page 13-18 * Kits consist of: Top track, fascia cover, (1) sliding door fitting set, bottom guide filler profile for top track, clip profile and u-channel for bottom of fixed panel FINISHED FLOOR 1 5 16" [33mm] 1" [25.4mm] BO 5101564N BO 5214500N BO 5101567N BO 5214501N Length Finish Optima 150 complete sliding door kit. Clg-mt. 98-7/16" (2.5m) Clear Anodized for (1) sliding door + fixed panel(s) Optima 150 complete sliding door kit. Clg-mt. 157-1/2" (4m) Clear Anodized for (1) sliding door + fixed panel(s) Optima 150 complete sliding door kit. Clg-mt. 98-7/16" (2.5m) Stainless Steel Effect for (1) sliding door + fixed panel(s) Optima 150 complete sliding door kit. Clg-mt. 157-1/2" (4m) Stainless Steel Effect for (1) sliding door + fixed panel(s) T +1 877 678 2021 (toll free) F +1 877 678 2022 (toll free) info@bohle-america.com www.bohle-america.com 5
CEILING MOUNTED RECESSED TRACK - SLIDING + FIXED S Optima 150 Sliding door hardware for recessed ceiling mounting applications with fixed panels 1 3 TOP OF TRACK 8" [35mm] 2 3 4" [70mm] SYSTEM HEIGHT (SH) 3 8" [10mm] SLIDING GLASS HEIGHT (SPGH) = (SH - 1 3 4" [44.45mm]) FASCIA FITTING SET TOP TRACK GLASS SLIDING GLASS FIXED 3/8" SETTING BLOCK U-CHANNEL FLOOR GUIDE 1" [25mm] FINISHED FLOOR 7 8" [22.2mm] ~ 1 5 16" [32.6mm] EXTERIOR 1 5 16" [33mm] ~ 7 8" [21.7mm] ROOM INTERIOR 1" [25.4mm] FINISHED CEILING +/- 1/8" FIXED GLASS HEIGHT (FPGH) = (SH - 2" [50.8mm]) 1" [25.4mm] 1 1 2" [38mm] 1 2" [12.7mm] * Maximum weight capacity, 330 lbs. (150 kg.) per sliding panel * Glass type / thickness * Monolithic tempered 3/8" (10mm), 1/2" (12.7mm) no glass holes or notches required * German manufactured * Ceiling mounted * Pre-packaged kits for simple order processing * Single, Bi-parting and synchronized sliding door options * Optional accessories available: * Additional sliding door fitting kits, see page 8 * Soft-close kits, see page 7 * Synchronization kits, see page 8 * Architectural pulls and handles, see page 11 * Butt glazing gaskets, see page 13-18 * Kits consist of: Top track, fascia cover, (1) sliding door fitting set, bottom guide filler profile for top track, clip profile and u-channel for bottom of fixed panel BO 5101564N BO 5214500N BO 5101567N BO 5214501N Desription Optima 150 complete sliding door kit. Clg-mt. 98-7/16" (2.5m) Clear Anodized for (1) sliding door + fixed panel(s) Optima 150 complete sliding door kit. Clg-mt. 157-1/2" (4m) Clear Anodized for (1) sliding door + fixed panel(s) Optima 150 complete sliding door kit. Clg-mt. 98-7/16" (2.5m) Stainless Steel Effect for (1) sliding door + fixed panel(s) Optima 150 complete sliding door kit. Clg-mt. 157-1/2" (4m) Stainless Steel Effect for (1) sliding door + fixed panel(s) CEILING MOUNTED EXPOSED TRACK - FIXED Optima 150 Fixed / Return panel hardware for exposed ceiling mounting applications 3 3 8" [85.2mm] 1 1 2" [38mm] FIXED GLASS HEIGHT (FPGH) = (SH - 2" [50.8mm]) FINISHED CEILING / TOP OF TRACK FASCIA TOP TRACK GLASS FIXED GLASS FIXED 3/8" SETTING BLOCK U-CHANNEL 2 5 8" [67.1mm] EXTERIOR 2 3 4" [70mm] +/- 1/8" ROOM INTERIOR * Maximum weight capacity, 330 lbs. (150 kg.) per sliding panel * Glass type / thickness * Monolithic tempered 3/8" (10mm), 1/2" (12.7mm) no glass holes or notches required * German manufactured * Ceiling mounted * Pre-packaged kits for simple order processing * Kits consist of: Top track, fascia cover, filler profile for top track, clip profile and u-channel for bottom of fixed panel 1 2" [12.7mm] FINISHED FLOOR 1" [25.4mm] 1" [25.4mm] BO 5101756 BO 5101757 BO 5101758 BO 5101759 Desription Fixed / Return Panel Sets - Clear Anodized 157-1/2" (4m) Fixed / Return Panel Sets - Clear Anodized 236-1/4" (6m) Fixed / Return Panel Sets - Stainless Steel Effect 157-1/2" (4m) Fixed / Return Panel Sets - Stainless Steel Effect 236-1/4" (6m) Optima 150 Planning details 6 Metric specifications are exact inches are approximate
Optima 150 Fixed / Return panel hardware for recessed ceiling mounting applications 1 1 2" [38mm] FIXED GLASS HEIGHT (FPGH) = (SH - 2" [50.8mm]) TOP OF TRACK FASCIA TOP TRACK 7 8" [22.2mm] GLASS FIXED GLASS FIXED 3/8" SETTING BLOCK U-CHANNEL ~2 5 8" [67.1mm] EXTERIOR 2 3 4" [70mm] FINISHED CEILING +/- 1/8" ROOM INTERIOR * Maximum weight capacity, 330 lbs. (150 kg.) per sliding panel * Glass type / thickness * Monolithic tempered 3/8" (10mm), 1/2" (12.7mm) no glass holes or notches required * German manufactured * Ceiling mounted * Pre-packaged kits for simple order processing * Kits consist of: Top track, fascia cover, filler profile for top track, clip profile and u-channel for bottom of fixed panel 1 2" [12.7mm] FINISHED FLOOR 1" [25.4mm] 1" [25.4mm] BO 5101756 BO 5101757 BO 5101758 BO 5101759 Description Fixed / Return Panel Sets - Clear Anodized 157-1/2" (4m) Fixed / Return Panel Sets - Clear Anodized 236-1/4" (6m) Fixed / Return Panel Sets - Stainless Steel Effect 157-1/2" (4m) Fixed / Return Panel Sets - Stainless Steel Effect 236-1/4" (6m) Optima 150 Planning details FOW A A Overlap DGW = DOW + 2" (per overlay) FPW = ((FOW - DOW) - Total of Gaps) / Number of Fixed Panels NoFP FOW* = Finished Opening Width DOW = Door Opening Width DGW = Door Glass Width FPW = Fixed Panel width NoFP = number of fixed panels A = vertical joint(s)/gap(s) Inside * Defined as finished wall/jamb to finished wall/jamb ** Defined as 1/8" deduction per vertical joint, up to 1/4" Note: Bohle's G2G components require 1/8" vertical joints See Section Detailed Drawings for Height Calculations: SH** = System Heightw DGH = Door Glass Height FPH = Fixed Panel Height Accessories for all Optima 150 applications Soft close / open for Optima 150 Minimum door width with single-sided damping 510mm, with double-sided 800mm Included in delivery: 2x Damping Mechanism (BO 5101571N) 4x Damping Mechanism (BO 5101572N) 1x Release bolt BO 5101571N BO 5101572N Weight Maximum 176 lbs. (80 kg) Maximum 330 lbs. (150 kg) T +1 877 678 2021 (toll free) F +1 877 678 2022 (toll free) info@bohle-america.com www.bohle-america.com 7
Sliding door fitting sets for Optima 150 Note: Please order the set 2x when placing a single order of profiles for 2 doors. Order an accessory set as well when changing the set to 2 doors. For 1 door Glass thickness tempered glass 8-12 mm Glass thickness laminated safety glass consisting of tempered glass/pvb/tempered glass 8,76-12,76 mm Included in delivery: 2x Carriages 2x End stops 1x Bottom guide 1x Fixing Screws BO 5101573N BO 5101574N Finish clear anodized stainless steel effect Synchronization fitting set for Bi-parting door applications for Optima 150 Included in delivery: 2x Deflection Rollers 2x Wire cable connector 1x Door follower 1x Wire cable BO 5101575N Cover Cap face fixed SlideTec optima 150 without Fixed Sidelight Material Aluminium Sales unit 1 item BO 5101547 BO 5101550 Finish stainless steel effect clear anodized Cover Cap face fixed SlideTec optima 150 with Fixed Sidelight i Material Aluminium Sales unit 1 item BO 5101548 BO 5101549 Finish stainless steel effect clear anodized 8 Metric specifications are exact inches are approximate
Optima 150 Top track, Fascia, + U-cover profile for fixed side lite(s) components SlideTec optima 150 Ceiling Mounting Mounting Ceiling Mounting Material Aluminium profile pre-drilled BO 5101655N BO 5216010 BO 5101658N BO 5216011 Name Length Finish Top Track 236 1/4" clear anodized Fascia 236 1/4" clear anodized Top Track 236 1/4" stainless steel effect Fascia 236 1/4" stainless steel effect SlideTec optima 150 Wall Mounting Mounting Wall Mounting Material Aluminium profile pre-drilled BO 5216150N BO 5216010 BO 5216151N BO 5216011 Name Length Finish Top Track 236 1/4" clear anodized Fascia 236 1/4" clear anodized Top Track 236 1/4" stainless steel effect Fascia 236 1/4" stainless steel effect SlideTec optima 150 Ceiling Mounting with Fixed Sidelight Mounting Ceiling Mounting Material Aluminium profile pre-drilled BO 5216500N BO 5216010 BO 5101665 BO 5216501N BO 5216011 BO 5101667 Name Length Finish Top Track 236 1/4" clear anodized Fascia 236 1/4" clear anodized U-Fascia for fixed sidelight profile 236 1/4" clear anodized Top Track 236 1/4" stainless steel effect Fascia 236 1/4" stainless steel effect U-Fascia for fixed sidelight profile 236 1/4" stainless steel effect T +1 877 678 2021 (toll free) F +1 877 678 2022 (toll free) info@bohle-america.com www.bohle-america.com 9
U-channel for fixed side lite(s) (bottom) Dimensions: 1" x 1" x 1/8" x 20' stock length BA 6703435 BA 6703434 BA 6703440 BA 6703441 Finish 1 x 1 u-channel - clear anodized 1 x 1 u-channel - stainless steel effect Roll-in gasket for 3/8" glass Roll-in gasket for 1/2" glass Bottom Guide tempered glass standard Rattle-Proof Bottom Guide Accessory for SlideTec optima Glass thickness tempered glass 1/2" (12.7 mm) Material Aluminium BO 5101629 BO 5101630 Finish clear anodized stainless steel effect Lower stop buffer for glass thickness 8-12 mm BO 5101611 BO 5101612 Finish clear anodized stainless steel effect Fixing Screws max. 6m, BO 5101647N-50N, BO 5201610-11 and BO 5101663-64 BO 5101672 Set 30 pcs. 10 Metric specifications are exact inches are approximate
Architectural pull handles Architectural pull handles Stainless steel Satin (US 32D) Polished (US 32) 1 ¼ (32 mm) diameter Glass fabrication: 5/8 (15 mm) diameter hole Custom pull handles available upon request Please check optional center post fabrication for lengths of 60" and greater Finish Length (L) Diameter(ø) C-C Middle post H (projection) BA 52 133 22 Satin (US32) 12" (305 mm) 1 1/4" (32 mm) 6" (152 mm) None 2 ½ (63.5 mm) BA 52 133 23 Pol. (US32D) 12" (305 mm) 1 1/4" (32 mm) 6" (152 mm) None 2 ½ (63.5 mm) BA 52 133 24 Satin (US32D) 24 (610 mm) 1 1/4 (32 mm) 12" (305 mm) None 2 ½ (63.5 mm) BA 52 133 25 Pol. (US32) 24 (610 mm) 1 1/4 (32 mm) 12" (305 mm) None 2 ½ (63.5 mm) BA 52 133 26 Satin (US32D) 36 (914 mm) 1 1/4 (32 mm) 24 (610 mm) None 2 ½ (63.5 mm) BA 52 133 27 Pol. (US32) 36 (914 mm) 1 1/4 (32 mm) 24 (610 mm) None 2 ½ (63.5 mm) BA 52 133 28 Satin (US32D) 48 (1219 mm) 1 1/4 (32 mm) 36 (914 mm) None 2 ½ (63.5 mm) BA 52 133 29 Pol. (US32) 48 (1219 mm) 1 1/4 (32 mm) 36 (914 mm) None 2 ½ (63.5 mm) BA 52 133 30 Satin (US32D) 60 (1524 mm) 1 1/4 (32 mm) 48 (1219 mm) Centered - 30" 2 ½ (63.5 mm) BA 52 133 40 Satin (US32D) 60 (1524 mm) 1 1/4 (32 mm) 48 (1219 mm) None 2 ½ (63.5 mm) BA 52 133 31 Pol. (US32) 60 (1524 mm) 1 1/4 (32 mm) 48 (1219 mm) Centered - 30" 2 ½ (63.5 mm) BA 52 133 32 Satin (US32D) 72 (1829 mm) 1 1/4 (32 mm) 60 (1524 mm) Centered - 36" 2 ½ (63.5 mm) BA 52 133 42 Satin (US32D) 72 (1829 mm) 1 1/4 (32 mm) 60 (1524 mm) None 2 ½ (63.5 mm) BA 52 133 33 Pol. (US32) 72 (1829 mm) 1 1/4 (32 mm) 60 (1524 mm) Centered - 36" 2 ½ (63.5 mm) BA 52 133 34 Satin (US32D) 84 (2134 mm) 1 1/4 (32 mm) 72 (1828 mm) Centered - 42 2 ½ (63.5 mm) BA 52 133 35 Pol. (US32) 84 (2134 mm) 1 1/4 (32 mm) 72 (1828 mm) Centered - 42 2 ½ (63.5 mm) BA 52 133 36 Satin (US32D) 96 (2438 mm) 1 1/4 (32 mm) 84 (2133 mm) Centered - 48 2 ½ (63.5 mm) BA 52 133 37 Pol. (US32) 96 (2438 mm) 1 1/4 (32 mm) 84 (2133 mm) Centered - 48 2 ½ (63.5 mm) BA 52 133 38 Satin (US32D) 108 (2743 mm) 1 1/4 (32 mm) 96 (2438 mm) Centered - 54 2 ½ (63.5 mm) BA 52 133 39 Pol. (US32) 108 (2743 mm) 1 1/4 (32 mm) 96 (2438 mm) Centered - 54 2 ½ (63.5 mm) * All ladder pulls include a seperate bolt set (3" long screw) to accommodate doors up to 1 1/4" T +1 877 678 2021 (toll free) F +1 877 678 2022 (toll free) info@bohle-america.com www.bohle-america.com 11
Standard Finishes: US32 Polished Stainless, US32D Satin Stainless Non Standard Finishes: ECoat US3 Polished Brass/US4 Satin Brass, US9 Polished Bronze/US10 Satin Bronze, US10B Oil Rubbed Bronze and Powder Coat in many colors Functions: Keyed Outside / Thumb Turn inside standard or ADA Keying: SFIC (small format interchangeable core) or LFIC (large format interchangeable core) Bohle-Americas standard cylinder location is 42 above finished floor Cylinders should be located 34 to 48 above finished floor to comply with ADA specifications ADA compliant thumb turn available Half Height pulls for top and bottom locking Full height pulls for single or dual locking options Designed and manufactured in the USA Glass Fabrication: for 1/2 glass 3/4 dia hole at lock, 5/8 dia hole at bottom post Can be mounted on glass, metal and wood doors (specify thickness) Dustproof floor and top strikes available 1 1 4 " 1 1 2" 3 4 " Hole 36" 3 1 4" Stocked Pulls Down locking 45-1/4 overall length 42 cylinder height location BTB mounting for 1/2 glass US32 Polished Stainless US32D Satin Stainless Ordering Information: Specify the following, overall length, CTC for mounting posts, and distance from finished floor to cylinder (Ordering forms available) 5 8 " Hole 1" 2 1 8" 6" 12 Metric specifications are exact inches are approximate
Door lock systems Stainless steel, satin, # 304 Operation: push / turn (cam type) Applications: By-passing Fixed / sliding Glass fabrication 1 3/8 (34 mm) hole BO 52 146 68/69 Overlay recommendation: 3 /18 (80 mm) Includes 4 user keys Allowable vertical gap between glass panels = 1/2" - 1" (12-25.4 mm) BO 52 141 10 BO 5214668 BO 5214669 Finish brushed nickel, satin chrome plated, satin Center lock housing Packaging: 1 set Lock including strike plate Hook bolt type Double 17mm euro keyed cylinder included Stainless steel #304 cover caps and strike plate Glass fabrication (lock): Depth: 2 9/16" (65 mm) Height: 4 15/16" (125 mm) Radius corners: 1/2" (12.7 mm) Requires (1) 17mm Euro cylinder, BO 5206656 Finish Glass thickness Dimensions (lock) BO 52 146 66 US32D 3/8" - 1/2" (10-12.7 mm) 3 15/16"w x 5 5/8"h x 1"d (100 x 143 x 25 mm) Center lock housing Packaging: 1 set Lock including strike box Hook bolt type Double 17mm euro keyed cylinder included Suitable for bi-parting doors Stainless steel #304 cover caps Glass fabrication (lock / strikebox): Depth: 2 9/16" (65 mm) Height: 4 15/16" (125 mm) Radius corners: 1/2" (12.7 mm) Requires (1) 17mm Euro cylinder, BO 5206656 Finish Glass thickness Dimensions (lock) BO 52 146 67 US32D 3/8" - 1/2" (10-12.7 mm) 3 15/16"w x 5 5/8"h x 1"d (100 x 143 x 25 mm) Glass fabrication for BO 52 146 66 Glass fabrication for BO 52 146 67 T +1 877 678 2021 (toll free) F +1 877 678 2022 (toll free) info@bohle-america.com www.bohle-america.com 13
Lock - key operated Finish: stainless steel finish (US32D) Glass thickess: up to 3/8" (10 mm) Includes: 2" (50 mm) long 17 mm euro profile cylinder with (3) keys Operation: keyed - both sides Includes: strike plate Glass fabrication: Dia: 2 3/8" Offsets: Horizontal: 2 3/4" Vertical: 2 5/8" Lock case dimensions: Width: 2 3/4" (70 mm) Height: 4 5/16" (110 mm) BO 5213844 Lock - thumb turn Clamping lock with matt nickel plated floor socket Finish: stainless steel look (US32D) Glass thickess: up to 3/8" (10 mm) Operation: thumb turn side only Includes: strike plate Glass fabrication: None BO 5206855 Bottom Door Stop With centring part BO 5214726 BO 5214727 Finish matt chrome-plated stainless steel effect Centering Device For use without wall profile BO 5214728 Color grey 14 Metric specifications are exact inches are approximate
Butt glazing gasketing, Bohle Duplocoll For many different applications, such as all-glass partition walls, showers, furniture, and many more For many different materials, such as glass, plastic, aluminum, wood, or ceramic High transparency due to a light refractive index virtually identical to glass Antimicrobial effect inhibits the growth of microorganisms Resistant to chemicals and softeners Excellent initial tack, lasting ultimate bonding strength Elongation of up to 500% and highly split resistant By sealing the edges of the adhesive tape, Duplocoll becomes dry after adhesion and resistant to external influences Also suitable for rough surfaces. The viscoelastic adhesive film distributes evenly across rough surfaces Product attributes: Thickness: 1/8 (3 mm) Color: Transparent Max. allowable continuous temperature: -40 F to + 212 F (-40 C to + 100 C) Glass thickness Material width BO 52 079 38 5/16 3/8 (8 10 mm) 5/16 (7 mm) BO 52 079 35 7/16 ½ (11 12.7 mm) 3/8 (9 mm) Applicator tool for Bohle Duplocoll, butt glazing gasketing BO 52 079 39 BO 52 079 46 Glass thickness 5/16 3/8 (8 10 mm) 7/16 ½ (11 12.76 mm) T +1 877 678 2021 (toll free) F +1 877 678 2022 (toll free) info@bohle-america.com www.bohle-america.com 15
Glass Connection Profile Glass architecture and design practices have advanced over the last decade with a number of iconic buildings incorporating the use of glazing and glass partitioning. The advancements in partitioning design have led to the specification of more minimal streamline systems. The glass partition joints offer an alternative to silicone, to achieve a clear slimline joint between glass panels. The improved visual appearance of these profiles is further enhanced by the increased UV stability. Partition Joint 180 Mounting glass/glass Version self-adhesive Length 9'-10 1/8" (3000 mm) Color transparent Material PETG Please note: You will find all relevant technical data in our Online Shop at www.bohle-america.com BO 5201720 BO 5201726 Glass thickness tempered /laminated safety glass 3/8" (10, 10.8 mm) tempered /laminated safety glass 1/2" (12.7-12.76 mm) Partition Joint 3-Way Mounting glass/glass Version self-adhesive Length 9'-10 1/8" (3000 mm) Color transparent Material PETG Please note: You will find all relevant technical data in our Online Shop at www.bohle-america.com BO 5201721 BO 5201727 Glass thickness tempered /laminated safety glass 3/8" (10, 10.8 mm) tempered /laminated safety glass 1/2" (12.7-12.76 mm) 16 Metric specifications are exact inches are approximate
Partition joint 135, connector Mounting glass/glass Version self-adhesive Length 9'-10 1/8" (3000 mm) Color transparent Material PETG Please note: You will find all relevant technical data in our Online Shop at www.bohle-america.com BO 5201722 BO 5201728 Glass thickness tempered /laminated safety glass 3/8" (10, 10.8 mm) tempered /laminated safety glass 1/2" (12.7-12.76 mm) Partition joint 90, corner protection Mounting glass/glass Version self-adhesive Length 9'-10 1/8" (3000 mm) Color transparent Material PETG Please note: You will find all relevant technical data in our Online Shop at www.bohle-america.com BO 5201723 BO 5201729 Glass thickness tempered /laminated safety glass 3/8" (10, 10.8 mm) tempered /laminated safety glass 1/2" (12.7-12.76 mm) Partition joint abutment Mounting glass/glass Version self-adhesive Length 9'-10 1/8" (3000 mm) Color transparent Material PETG Please note: You will find all relevant technical data in our Online Shop at www.bohle-america.com BO 5201724 BO 5201730 Glass thickness tempered /laminated safety glass 3/8" (10, 10.8 mm) tempered /laminated safety glass 1/2" (12.7-12.76 mm) T +1 877 678 2021 (toll free) F +1 877 678 2022 (toll free) info@bohle-america.com www.bohle-america.com 17
Partition joint slimline, H section Mounting glass/glass Version self-adhesive Length 9'-10 1/8" (3000 mm) Color transparent Material PETG Please note: You will find all relevant technical data in our Online Shop at www.bohle-america.com Glass thickness BO 5201725 tempered /laminated safety glass 3/8" (10, 10.8 mm) BO 5201731 tempered /laminated safety glass 1/2" (12.7-12.76 mm) Vertical edge glass protection Self-adhesive rubber profile to be attached to the glass edge Minimizes draughts Buffers impacts between by-parting sliding glass panels Glass thickness Color Material length BO 5214809 5/16 ½ (8 12.7 mm) Black 16'-4 27/32"(5m) BO 5214810 5/16 ½ (8 12.7 mm) Black 32-9 23/32 (10 m) BO 5214812 5/16 ½ (8 12.7 mm) Transparent 16-4 27/32 (5 m) BO 5214813 5/16 ½ (8 12.7 mm) Transparent 32-9 23/32 (10 m) Material, finish Material length BO 5214717 Aluminum, anodized 8-2 7/16 (2500 mm) BO 5214718 Aluminum, stainless steel effect, satin 8-2 7/16 (2500 mm) BO 5214719 Aluminum, anodized 11-5 1/316 (3500 mm) BO 5214720 Aluminum, stainless steel effect, satin 11-5 13/16 (3500 mm) 18 Metric specifications are exact inches are approximate
Bohle Slide Tec Optima 150 ReGen AutoCAD Platform for Producing Application Drawing Sets Reduced Project Overheads Fairly priced drawing sets save as much a 50% from traditional drawing set providers Eliminate sizing mistakes with accurate project application drawing sets 24 hour drawing turn around (most projects) time saves money Promotes a Professional Image Architecturally correct layouts, text and dimension heights 11 x 17 page format 26 elevation width per page at current 1/2 scale on elevations Detail pages are drawn at 1;4 scale Cover Page, Elevations, Plan Views, and Section Details Complete hardware schedule Article numbers for Hardware Kits and Components with pre-defined hardware schedules NEW Fully Supported System Easy quoting and Order processing with Kit Article Number Set Up Pre fabricated and stocked Kits in 2 width size ranges for doors and fixed panels Additional Stocked inventories for special conditions and applications Clear and Similar to Satin Stainless Anodized Aluminum finishes are available New sales brochure New specification New PDF library on Sync Drive Extensive library of pre-drawn elevations, plan and section views T +1 877 678 2021 (toll free) F +1 877 678 2022 (toll free) info@bohle-america.com www.bohle-america.com 19
USA Bohle America, Inc. 10924 Granite Street Suite 200 Charlotte, NC 28273 T +1 877 678 2021 (toll free) F +1 877 678 2022 (toll free) info@bohle-america.com www.bohle-america.com KA 156US00 2018-7421 08-18 USA