Click on Series name for product info on aimtec.com FEATURES: Models Single output Model Input RoHS Compliant Operating Temperature - o C to +85 o C High Efficiency up to 89% Pin Compatible with Multiple Manufacturers Low Ripple and Noise Input / Isolation, VDC 7 pin SIP Package Non-Conductive Plastic Case Current Max (ma) Isolation Input Current Full Load No Load (ma) Max Capacitive Load (uf) Efficiency (%) AM2D-55S-RZ 4.5-5.5 5 494 5 2 81 AM2D-59S-RZ 4.5-5.5 9 222 471 5 2 85 AM2D-512S-RZ 4.5-5.5 12 167 471 5 85 AM2D-515S-RZ 4.5-5.5 15 134 465 5 86 AM2D-15S-RZ.8-13.2 5 198 2 84 AM2D-19S-RZ.8-13.2 9 222 194 2 86 AM2D-1212S-RZ.8-13.2 12 167 189 88 AM2D-1215S-RZ.8-13.2 15 134 189 88 AM2D-155S-RZ 13.5-16.5 5 157 2 85 AM2D-159S-RZ 13.5-16.5 9 222 153 2 87 AM2D-1512S-RZ 13.5-16.5 12 167 153 87 AM2D-1515S-RZ 13.5-16.5 15 134 152 88 AM2D-25S-RZ 21.6-26.4 5 2 2 82 AM2D-29S-RZ 21.6-26.4 9 222 99 2 84 AM2D-2412S-RZ 21.6-26.4 12 167 97 86 AM2D-2415S-RZ 21.6-26.4 15 134 96 87 AM2D-485S-RZ 43.2-52.8 5 51 2 82 AM2D-489S-RZ 43.2-52.8 9 222 5 2 84 AM2D-4812S-RZ 43.2-52.8 12 167 48 86 AM2D-4815S-RZ 43.2-52.8 15 134 47 87 AM2D-55SH-RZ 4.5-5.5 5 494 5 2 81 AM2D-59SH-RZ 4.5-5.5 9 222 471 5 2 85 AM2D-512SH-RZ 4.5-5.5 12 167 471 5 85 AM2D-515SH-RZ 4.5-5.5 15 134 465 5 86 AM2D-15SH-RZ.8-13.2 5 198 2 84 AM2D-19SH-RZ.8-13.2 9 222 194 2 86 AM2D-1212SH-RZ.8-13.2 12 167 189 88 AM2D-1215SH-RZ.8-13.2 15 134 189 88 AM2D-155SH-RZ 13.5-16.5 5 157 2 85 AM2D-159SH-RZ 13.5-16.5 9 222 153 2 87 AM2D-1512SH-RZ 13.5-16.5 12 167 153 87 AM2D-1515SH-RZ 13.5-16.5 15 134 152 88 AM2D-25SH-RZ 21.6-26.4 5 2 2 82 AM2D-29SH-RZ 21.6-26.4 9 222 99 2 84 AM2D-2412SH-RZ 21.6-26.4 12 167 97 86 AM2D-2415SH-RZ 21.6-26.4 15 134 96 87 AM2D-485SH-RZ 43.2-52.8 5 51 2 82 AM2D-489SH-RZ 43.2-52.8 9 222 5 2 84 AM2D-4812SH-RZ 43.2-52.8 12 167 48 86 AM2D-4815SH-RZ 43.2-52.8 15 134 47 87 F 51e R12.D 1 of 6 North America only
Models Dual output Model Input Current Max (ma) Isolation Input Current Full Load No Load (ma) Max Capacitive Load (uf) Efficiency (%) AM2D-55D-RZ 4.5-5.5 ±5 ± 494 5 ± 82 AM2D-59D-RZ 4.5-5.5 ±9 ±111 471 5 ± 85 AM2D-512D-RZ 4.5-5.5 ±12 ±83 471 5 ±47 86 AM2D-515D-RZ 4.5-5.5 ±15 ±67 465 5 ±47 87 AM2D-15D-RZ.8-13.2 ±5 ± 198 ± 84 AM2D-19D-RZ.8-13.2 ±9 ±111 194 ± 88 AM2D-1212D-RZ.8-13.2 ±12 ±83 189 ±47 89 AM2D-1215D-RZ.8-13.2 ±15 ±67 189 ±47 89 AM2D-155D-RZ 13.5-16.5 ±5 ± 157 ± 85 AM2D-159D-RZ 13.5-16.5 ±9 ±111 153 ± 88 AM2D-1512D-RZ 13.5-16.5 ±12 ±83 153 ±47 88 AM2D-1515D-RZ 13.5-16.5 ±15 ±67 152 ±47 88 AM2D-25D-RZ 21.6-26.4 ±5 ± 2 ± 82 AM2D-29D-RZ 21.6-26.4 ±9 ±111 99 ± 85 AM2D-2412D-RZ 21.6-26.4 ±12 ±83 97 ±47 86 AM2D-2415D-RZ 21.6-26.4 ±15 ±67 96 ±47 87 AM2D-485D-RZ 43.2-52.8 ±5 51 ± 82 AM2D-489D-RZ 43.2-52.8 ±9 222 5 ± 84 AM2D-4812D-RZ 43.2-52.8 ±12 167 48 ±47 86 AM2D-4815D-RZ 43.2-52.8 ±15 134 47 ±47 87 AM2D-55DH-RZ 4.5-5.5 ±5 ± 494 5 ± 82 AM2D-59DH-RZ 4.5-5.5 ±9 ±111 471 5 ± 85 AM2D-512DH-RZ 4.5-5.5 ±12 ±83 471 5 ±47 86 AM2D-515DH-RZ 4.5-5.5 ±15 ±67 465 5 ±47 87 AM2D-15DH-RZ.8-13.2 ±5 ± 198 ± 84 AM2D-19DH-RZ.8-13.2 ±9 ±111 194 ± 88 AM2D-1212DH-RZ.8-13.2 ±12 ±83 189 ±47 89 AM2D-1215DH-RZ.8-13.2 ±15 ±67 189 ±47 89 AM2D-155DH-RZ 13.5-16.5 ±5 ± 157 ± 85 AM2D-159DH-RZ 13.5-16.5 ±9 ±111 153 ± 88 AM2D-1512DH-RZ 13.5-16.5 ±12 ±83 153 ±47 88 AM2D-1515DH-RZ 13.5-16.5 ±15 ±67 152 ±47 88 AM2D-25DH-RZ 21.6-26.4 ±5 ± 2 ± 82 AM2D-29DH-RZ 21.6-26.4 ±9 ±111 99 ± 85 AM2D-2412DH-RZ 21.6-26.4 ±12 ±83 97 ±47 86 AM2D-2415DH-RZ 21.6-26.4 ±15 ±67 96 ±47 87 AM2D-485DH-RZ 43.2-52.8 ±5 51 ± 82 AM2D-489DH-RZ 43.2-52.8 ±9 222 5 ± 84 AM2D-4812DH-RZ 43.2-52.8 ±12 167 48 ±47 86 AM2D-4815DH-RZ 43.2-52.8 ±15 134 47 ±47 87 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25 C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. F 51e R12.D 2 of 6 North America only
Input Specifications Parameters Nominal Typical Maximum Units range 5 4.5-5.5 12.8-13.2 15 13.5-16.5 24 21.6-26.4 48 43.2-52.8 Filter Capacitor 5 Vin 9 12 Vin 18 Absolute Maximum Rating 15 Vin VDC 24 Vin 48 Vin 54 Peak Input time ms No Load Input Current 5 ma Isolation Specifications Parameters Conditions Typical Maximum Units TestedI/O voltage 6sec, VDC Resistance > MOhm Capacitance 6 pf Specifications Parameters Conditions Typical Maximum Units accuracy -4 ~ +2 % Line voltage regulation For 1.% of Vin 1.2 % of Vin Load voltage regulation Load Model -55S/SH 6 ~% Others 5 % Temperature coefficient ±.2 %/ o C Ripple & Noise MHz Bandwidth 5 mvp-p Minimum Load Current % of Max General Specifications Parameters Conditions Typical Maximum Units Switching frequency % load 7 KHz Operating temperature - to +85 o C Storage temperature - to +125 o C Maximum case temperature o C Cooling Free Air Convection Humidity 95 % RH Case material Plastic UL94V- Weight 2.8 g Dimensions (L x W x H).76 x.28 x.39 inch 19.5 x 7. x. mm MTBF >1.9 Mhrs (MIL-HDBK -217F, Ground Benign, t=+25 o C)hours Maximum soldering temperature 1.5mm from case for sec 26 o C VDC Safety Specifications Parameters Agency Approval Standards Pin Out Specifications CE EN5532, Class B EN5524: 1998 + A1: 1 + A2:3 IEC6-4-2:8 IEC6-4-3: 6 + A1: 7 IEC6-4-4, 4 IEC6-4-6: 8 IEC6-4-8: 1993 + A1: F 51e R12.D 3 of 6 North America only
Pin VDC VDC Single Dual Single Dual 1 + V Input + V Input + V Input + V Input 2 - V Input - V Input - V Input - V Input 4 - V - V No pin No pin 5 No pin Common -V -V 6 + V + V No pin Common 7 No pin No pin +V +V Dimensions 9.5 (.37) 19.5 (.76) PRINTED FACE 7. (.28). (.39).5 (.2) 7. (.28) 1.25 (.5) 2.54 (.) 15. (.6).5 (.2) 3.5 (.12).5 (.2).25 (.1) NOTE: Unit:mm [inch] Pin Diameter:.5 ±.5mm [.2 ±.2 inch] Pin Pitch tolerance: ±.35mm [ ±.14 inch] Case tolerance: ±.5mm [ ±.2 inch] Application Circuit, &Conducted Emissions L +V input C1 C2 DC/DC Converter +V output Load -V input -V output C3 Input C1 L C2 C3 5 2.2uF/V 18uH N/A N/A 12 2.2uF/V 18uH N/A N/A 15 2.2uF/V 18uH N/A N/A 24 2.2uF/V 18uH 2.2uF/V 47pF/2KV 48 2.2uF/V 18uH 2.2uF/V 47pF/2KV F 51e R12.D 4 of 6 North America only
Eff % Eff % EFT Vin+ C1 + - Vo+ Aimtec DC-DC Converter Vin- Vo- Load Input C1 5 2uF/V 12 2uF/V 15 2uF/V 24 2uF/V 48 2uF/V Typical Efficiency Chart Examples 9 8 7 6 5 AM2D-55S-RZ Efficiency vs. Loading % % 6% 8% % 9 8 7 6 5 AM2D-1215S-RZ Efficiency vs. Loading % % 6% 8% % F 51e R12.D 5 of 6 North America only
Eff % Eff % AM2D-159S-RZ Efficiency vs. Loading 9 8 7 6 5 % % 6% 8% % AM2D-2412S-RZ Efficiency vs. Loading 9 8 7 6 5 % % 6% 8% % NOTE: 1.Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3.Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25 C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified.5.aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec s standard Terms of Sale available at www.aimtec.com. F 51e R12.D 6 of 6 North America only