Switching Power Supplies

Similar documents
Open Frame Power Supplies

Switching Power Supplies

Industrial Power Supplies

C B. Operating up to 5000m altitude 5 year product warranty Models

Models. Output current max.* Output Power max. Low Line : VAC High Line: VAC 24 VDC / 12 A 240 W. Back up battery

DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS MTWA2 SERIES

Output Current Input Current Over Load VDC VDC ma ma(typ.) ma(typ.) VDC μf %

Series AM1P-Z 1 Watt DC-DC Converter

ECP180 Series. Low 1 Profile. High Power Density. 2.0 by 4.0 Footprint. 120W Convection-cooled Rating. 180W Force Cooled Rating

Series AM2D-Z 2 Watt DC-DC Converter

GB60S 60W Single Output General Purpose Series

Load (2) Single or Dual

MODEL SELECTION TABLE Open Frame Models. MODEL SELECTION TABLE U-Chassis Models. MODEL SELECTION TABLE Enclosed Models

Features. LED Driver. RACT09 9 Watt. TRIAC Dimmable. Single Output RACT09- AC/DC Converter

(typ.) (Range) Load

Output Current Input Current Reflected Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S033

Output Current Input Current Reflected Ripple. VDC VDC ma ma(typ.) ma(typ.) ma(typ.) VDC μf %

TRC ELECTRONICS, INC DC/DC Converter SIP Package 6W MEAN WELL SPBW06 & DPBW06 Series

Series AM2F-Z 2 Watt DC-DC Converter

Output Current Input Current Reflected Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S033

DC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE SWB9 SERIES

Packaging (1) Package

PG02S Series 2W DC/DC CONVERTER, SIP-Package

VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S

SH01S/D Series 1W DC/DC CONVERTER, SMD-Package

Series AM2S-Z 2 Watt DC-DC Converter

2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 87% Low Profile, 10.2mm Height Over Current Protection

(typ.) (Range) ±18 330# 89 MPW MPW

Output Current Input Current Reflected Ripple. Efficiency (typ.) (Range) VDC VDC ma ma(typ.) ma(typ.) ma(typ.) VDC μf % MTQZ50-72S05

Features. Unregulated Converters. 2 Watt SIP7 Single and Dual Output RKZE. RKZE- _/_ Protection (4) Isolation Option (3) Single or Dual

1 second start up, no external components 220µF <1 second start up + diode protection circuit 6800µF

INDUSTRIAL POWER SUPPLIES SFL-SERIES

Note1: tested at nominal Vin, full load and at +25 C ambient. Package (3) CTRL Logic (2)

Series AM5T-Z 5 Watt DC-DC Converter

Series AM1D-Z 1 Watt DC-DC Converter

MJWI20 SERIES FEATURES PRODUCT OVERVIEW. DC/DC Converter 20W, Highest Power Density MINMAX MJWI20 Series

DPX30-xxDxx DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power

DPX30-xxSxx DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; 3.3 to 28 VDC Single Output; 30 Watts Output Power

DPX30-xxWDxx DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power

Features. Regulated Converters. RP20-F 20 Watt 2 x 1 Single & Dual Output. RP20- _F/ Package 4) Control Logic (3) DC/DC Converter

DPX30-xxWSxx DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; 3.3 to 28VDC Single Output 30 Watts Output Power

RP40- _FR/ Package (4) CTRL Logic (3)

PART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1

Efficiency (typ.) (Range) Output Voltage Current. Input Current Load VDC VDC ma ma ma(typ.) ma(typ.) ma(typ.

PDL09-48 S 05 M Series Name Input Output Output Case Voltage Quantity Voltage Option PART NUMBER STRUCTURE

DPX15-xxWDxx Dual Output: DC-DC Converter Module 9.5 ~ 36VDC, 18 ~ 75VDC input; ±5 to ±15 VDC Dual Output; 15 Watts Output Power

(typ.) (Range) Input Specifications Parameter Model Min. Typ. Max. Unit 12V Input Models Input Surge Voltage (100ms.

RUZ- _/_ Protection (3) Isolation Option (4)

Output Voltage Current. Input Current Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma(typ.) μf % 2.

2W, Low Cost DIP, Dual Output DC/DC Converters

2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 90% Six-Sided Continuous Shield Available as Power Module (RPM30-E)

Series AM2D-Z 2 Watt DC-DC Converter

4:1 Input Voltage Range 2.25kVDC Isolation UL Certified Efficiency up to 87% Ultraminiature Open Frame SMD No Minimum Load Required

Series AM1G-NZ 1 Watt DC-DC Converter

PART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1

Notes: Note1: values at nominal input voltage and full load. 8.5VDC 5V 8V. Open, Efficiency vs. Input Voltage. Efficiency [%]

Application Note TES 1 Series

4:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 88% Six-Sided Continuous Shield Available as Power Module (RPM30-EW)

RWS50B RWS100B RWS150B RWS300B RWS600B

MPP10-48 S 05 W A - P T Series Name Input Output Output Input Pin Connection Remote On/Off Trim Voltage Quantity Voltage Range Option Options Option

DH50 SERIES. DATASHEET Rev. A

Features. Description. Table of Contents

PRODUCT SPECIFICATION OUTPUT CURRENT (A) OUTPUT CURRENT TOLERANCE ±7% ±7% ±10% ±10% ±7% 1.8. Units % % % Typ. Typ.

Efficiency Model dependant 86 ~ 88% Isolation. Isolation Cap. Switching Freq. Safety. Case Material Base Material Potting.

2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 91% Six-Sided Continuous Shield Available as Power Module (RPM60-G)

RDL06-48 S 05 W - M3 Series Name Input Output Output Input Operating ambient Voltage Quantity Voltage Range temperature PART NUMBER STRUCTURE

SDS05-48 S 05 W H Series Name Input Output Output Input Isolation Voltage Quantity Voltage Range Option PART NUMBER STRUCTURE

Specifications 2019-V AC-DC Din Rail Mounted Power Supply IS-70 Series, 70W

LANC245.1W12. DC/DC Converter VDC Input 5.1 VDC Output at 2.4A. Features:

HALF-BRICK DC-DC CONVERTERS 4:1 ULTRA WIDE INPUT RANGE 100 WATT RAILWAY APPLICATIONS HWB100 SERIES

Input surge voltage (max 3 seconds) 24V Nom : 50VDC 48V Nom: 100VDC

PDL03-48 S 05 W H Series Name Input Output Output Input Isolation Voltage Quantity Voltage Range Option PART NUMBER STRUCTURE

CHASSIS MOUNT DC-DC CONVERTERS 4:1 WIDE INPUT RANGE, 150 WATTS RAILWAY APPLICATIONS FWB(D)150 SERIES*

TDK-Lambda ZWS240BP/A SPECIFICATIONS

Features. Isolation PFM. Block Diagram

Input Voltage Range ±10% Output Voltage Accuracy Line Voltage Regulation RSS, RSS8, RSD, RSD10 1.2%/1% of Vin typ.

N2POWER XLM240 AC-DC SERIES HIGH-EFFICIENCY ITE & MEDICAL SWITCHING POWER SUPPLY

Conducted and radiated emissions (Note 4) EN55011, EN55022, Class A and FCC part 18 Immunity (Note 5)

HAE S 05 - P HS Series Name Input Output Output Ctrl and Assembly Option Voltage Quantity Voltage Pin Options

Features. Non Isolated Power Module ROF-78E ROF-78E - SMD-R. DC/DC Converter

RCD15W Series PART NUMBER STRUCTURE

DEWS SERIES 25W-30W WIDE INPUT RANGE

TDK-Lambda ZWS300BAF/A

Note1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%]

Note1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%]

HAE S 05 W - P HS Series Name Input Output Output Input Ctrl and Assembly Option Voltage Quantity Voltage Range Pin Options

FEATURES. Input Voltage (VDC) 3.3

Sixteenth brick format 4:1 input voltage range 2.25kV basic isolation Remote ON/OFF and trim pins UVLO, OTP, OVP, OCP and SCP Efficiency up to 91%

150 WATT HEW SINGLE SERIES DC/DC CONVERTERS

POWER-WIN TECHNOLOGY CORP.

DC/DC Converter URA(B)_LD-15WR2 & URA(B)_LD-20WR2 Series

UL Certified RP30-FW

PRODUCT SPECIFICATION File: EA-250U1C-10 Date: May, 25, 2005

Specifications 2019-V AC-DC Din Rail Mounted Power Supply IS-480 Series, 480W

DCMCW60 SERIES FEATURES

HAE S 05 - P TH HS PART NUMBER STRUCTURE Page 1. P-DUKE Technology Co., Ltd.

<Designed to meet harmonic current regulations> Board type, ultra-small size, and low cost

DC/DC Converter URB1D_LMD-10WR3 Series

HAE S 05 W - P TH HS PART NUMBER STRUCTURE Page 1. P-DUKE Technology Co., Ltd.

POWERBOX Industrial Line PMF20W Series 20W 4:1 Single Output DC/DC Converter Manual. DC/DC Converter Features. Introduction

Transcription:

, 18 150 Watt Features Compact boxed power supplies with screw terminal block Universal input 85-264 VAC, 50/60 Hz Short circuit and overvoltage protection High efficiency International safety approvals Industrial grade components 3-year product warranty Obsolete C B Scheme Models Obsolete discontinued December 2013 ot recommended for new design in This range of compact switching power supplies are designed for all applications, where high reliability and long lifetime are important. They provide excellent electric specifications and full compliance to international EMC and safety requirements. Order code Output power Output voltage Output current max. Efficiency at 115 VAC at 230 VAC at 115 VAC at 230 VAC ESP 18-05S 5 VDC 3.0 A 3.6 A 75 75 ESP 18-12S 12 VDC 1.3 A 1.5 A 79 79 ESP 18-15S 18 Watt 15 VDC 1.0 A 1.2 A 80 80 ESP 18-24S 24 VDC 0.7 A 0.8 A 80 80 ESP 18-48S 48 VDC 0.35 A 0.4 A 80 80 ESP 36-05S 5 VDC 6.0 A 6.0 A 75 76 ESP 36-12S 12 VDC 2.6 A 3.0 A 78 79 ESP 36-15S 36 Watt 15 VDC 2.1 A 2.5 A 79 80 ESP 36-24S 24 VDC 1.4 A 1.5 A 80 81 ESP 36-48S 48 VDC 0.7 A 0.8 A 80 81 ESP 60-05S 5 VDC 10 A 10 A 73 75 ESP 60-12S 12 VDC 4.3 A 5.0 A 78 80 ESP 60-15S 60 Watt 15 VDC 3.5 A 4.0 A 79 81 ESP 60-24S 24 VDC 2.2 A 2.5 A 80 82 ESP 60-48S 48 VDC 1.1 A 1.1 A 80 82 ESP 75-05S 5 VDC 15 A 15 A 78 81 ESP 75-12S 12 VDC 6.5 A 6.5 A 82 86 ESP 75-15S 75 Watt 15 VDC 5.2 A 5.2 A 83 87 ESP 75-24S 24 VDC 3.2 A 3.2 A 83 87 ESP 75-48S 48 VDC 1.6 A 1.6 A 83 87 ESP 100-05S 5 VDC 20 A 20 A 80 82 ESP 100-12S 12 VDC 8.6 A 8.6 A 86 87 ESP 100-15S 100 Watt 15 VDC 7.0 A 7.0 A 84 86 ESP 100-24S 24 VDC 4.4 A 4.4 A 84 86 ESP 100-48S 48 VDC 2.2 A 2.2 A 84 86 ESP 150-05S 5 VDC 30 A 30 A 78 81 ESP 150-12S 12 VDC 13 A 13 A 82 86 ESP 150-15S 150 Watt 15 VDC 10 A 10 A 83 87 ESP 150-24S 24 VDC 6.5 A 6.5 A 83 87 ESP 150-48S 48 VDC 3.3 A 3.3 A 83 87 http://www.tracopower.com Page 1 of 6

Input Specifications Input voltage range nominal 115 230 VAC AC range (universal input) 85 264 VAC DC range 110 350 VDC Input frequency 47 63 Hz Input current (at full load) Vin = 115 VAC Vin = 230 VAC ESP 18 models: 0.23 A typ. 0.33 A typ. ESP 36 models: 0.40 A typ. 0.65 A typ. ESP 60 models: 0.72 A typ. 1.1 A typ. ESP 75 models: 0.45 A typ. 0.95 A typ. ESP 100 models: 0.65 A typ. 1.3 A typ. ESP 150 models: 0.85 A typ. 1.9 A typ. Recommended circuit breaker characteristic C, or slow blow fuse Start-up time Earth leakage current Output Specifications up to 75 Watt models: 5 A 100 & 150 Watt models: 10 A Output voltage adjustment range ±10 % up to 60 Watt model: 100 ms max. other models: 800 ms max. at 230 VAC, 1700 ms at 115 VAC 750 µa max. Regulation Input variation 5 VDC models: 0.2 % max. other models: 0.1 % max. oad variation (0 100%) 5 VDC models: 0.8 % max. 60 W, other models: 0.4 % max. 75 W, other models: 0.2 % max. Temperature coefficient Minimum load 0.02 %/K not required Ripple and noise (20Mhz Bandwidth) 5 VDC models: 120 mv p-p max. Measured with output Capacitors:100 µf 12-24 VDC models: 150 mv p-p max. 100 µf Electrolytic and 0.1 µf film 48 VDC models: 200 mv p-p max. Output current limitation Short circuit protection Over voltage protection (Zener diode) 105 120 % Inom. Capacitive load 10 000 µf Switching Power Supplies indefinite, auto recovery 115 150 % Vout nom. http://www.tracopower.com Page 2 of 6

General Specifications Temperature ranges Operating 10 C to +60 C Derating above +50 C all models 2 %/ C Storage (non operating) 20 C to +85 C Humidity (non condensing) Switching frequency Hold-up time 85 % rel max. 60 W models: 45 to 170 khz (frequency modulation PFM) 75 W models: 120 khz typ. (puls width modulation PWM) up to 60 Watt model: 120 ms max. at 230 VAC, 20 ms at 115 VAC other models: 40 ms typ. Isolation voltage Input/ Output 3 000 VAC Input/ Case 1 500 VAC Output/ Case 500 VAC Reliability /calculated MTBF (MI-HDBK-217F, at +25 C, ground benign) ESP 18 & 36 models: >200 000 h ESP 60 models: >150 000 h other models >80 000 h Eectromagnetic compatibility (EMC), Emissions Conducted RI suppression E 55022, class B, FCC part 15, level B Harmonic current emissions IEC/E 61000-3-2, (for 75 W models) class D equipment Eectromagnetic compatibility (EMC), Immunity (all single output models) Electrostatic discharge ESD IEC/E 61000-4-2 4 kv/ 8 kv RF field immunity IEC/E 61000-4-3 10 mv/m Electrical fast transients/burst immunity IEC/E 61000-4-4 1 kv Surge IEC/E 61000-4-5 1 kv/ 2 kv Voltage dip IEC/E 61000-4-11 Safety standards U 60950, IEC/E 60950-1 Safety approvals U/cU 60950 (1950) www.ul.com -> certifications -> File e188913 CB report ESP 18 models: www.tracopower.com/products/esp18-cb.pdf according to IEC 60950-1 ESP 36 models: new report pending ESP 60 models: www.tracopower.com/products/esp60-cb.pdf ESP 75 models: www.tracopower.com/products/esp75-cb.pdf ESP 100 models: www.tracopower.com/products/esp100-cb.pdf ESP 150 models: www.tracopower.com/products/esp150-cb.pdf Degree of protection Environment Vibration sine sweep, 10 50Hz, 0.5mm, 1 min. cycle 3 axes each 30 min. Shock 20 G (3 axes, 3 times) Casing material Switching Power Supplies class I stainless steel All specifications valid at nominal input voltage, full load and +25 C after warm-up time unless otherwise stated. http://www.tracopower.com Page 3 of 6

Outline Dimensions mm (inches) ESP 18 models: 15max. 86.5 (3.41) 2 X M3 thread (bottom) (2.80) 71.0 32.0 (1.26) A C I F G 17.0 62.0 ±0.5 (0.67) (2.44±0.02) 7 57.0 ±0.5 (0.28) (2.24±0.02) 2 X M3 thread (bottom) 15 9.5 66.0 ±0.5 (0.37) (2.60±0.02) Weight ESP 18 200 g (0.44 lb) ESP 36 300 g (0.66 lb) ESP 36 models: 15max. 115.0 17 (0.67) 87.0±0.5 (4.53) (3.43±0.02) (2.95) 75.0 32.0 (1.26) AC I 2xM3 (mounting holes) bottom 2xM3 (mounting holes) 15 61.0±0.5 7 (0.28) (2.40±0.02) 9.5 81.0±0.05 (0.37) (3.19±0.02) http://www.tracopower.com Page 4 of 6

Outline Dimensions mm (inches) ESP 60 models: 15max. 134.5 18 110.0±0.5 (5.30) (4.33±0.02) (3.15) 80.5 37.0 (1.46) AC I 2x M3 (mounting holes) bottom 2x M3 (mounting holes) 18 7 66.5±0.5 (2.71±0.02) (0.71) (0.28) 9.5 106.0±0.5 (0.37) (4.17±0.02) Weight ESP 60 480 g (1.06 lb) ESP 75 490 g (1.08 lb) ESP 75 models: 15.0 max. (0.59 max.) 35.5 (1.398) 162.0 (6.378) 114.5 ± 0.5 (4.508 ± 0.02) 88.0 (3.465) AC I M 4 thread 0 42.5 ± 0.5 (1.673 ± 0.02) M 3 thread (bottom) M 3 thread 38.5 18.0 (0.709) (1.516) 7.5 (0.295) 147.0 ± 0.5 (5.787 ± 0.02) http://www.tracopower.com Page 5 of 6

Outline Dimensions mm (inches) ESP 100 models: 187.0 (7.362) 20.0 (0.787) 40.0 (1.575) 132.0 ± 0.5 (5.197 ± 0.02) 93.0 (3.661) AC I +S -S 41.0 (1.614) M 4 thread (bottom) M 4 thread 39.0 (1.535) 18.0 (0.709) 21.0 (0.827) 7.5 (0.295) 170.0 ± 0.5 (6.693 ± 0.02) Weight ESP 100 690 g (1.52 lb) ESP 150 900 g (1.98 lb) ESP 150 models: 196.0 (7.717) V Adj. 20.0 max. (0.787 max.) 15.5 (0.610) 171.0 ± 0.5 (6.732 ± 0.02) 107.0 (4.213) AC I +S -S 88.5 ± 0.5 (3.484 ± 0.02) M 4 thread (bottom) M 4 thread 8.5 45.0 (1.772) 21.0 (0.827) (0.335) 10.0 (0.394) 176.5 ± 0.5 (6.949 ± 0.02) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Rev. December 13. 2013 www.tracopower.com Page 6 of 6