Extreme Performance Roller Chain Catalog. Rexnord Extreme Performance Roller Chain

xtrm Prformanc Rollr Chain Catalo Rxnord xtrm Prformanc Rollr Chain

Rxnord xtrm Prformanc Rollr Chain for th Most Dmandin lications

Introduction to th Rxnord xtrm Prformanc Portfolio Incrasin markt dmands for xtrm rformanc chain has drivn Rxnord to dvlo a roduct ortfolio* suitabl for havy loadin caacitis and hih fatiu rsistanc: Rxnord Rxthltic Rollr Chain a 4 Rxnord RxHiPro Rollr Chain a 10 Rxnord RxHiProthltic Rollr Chain a 14 Rxnord RXtrm Rollr Chain a 18 Rxnord RxCarbon Rollr Chain a 22 Rxnord RxProX Rollr Chain a 26 Rxnord RxPlus Rollr Chain a 29 Rxnord RxPlusCarbon Rollr Chain a 34 * ll th chains ar also availabl with attachmnts and xtndd ins. For rics, ladtims and mimimum ordr quantitis las consult our currnt ric book or cntact Rxnord. Rxnord xtrm Prformanc Chain will dlivr: Imrovd war rsistanc Imrovd dynamic and static safty Incrasd chain joint loadin caability Imrovd hyin Incrasd corrosion rotction 3

Rxnord Rxthltic Rollr Chain xtrm Prformanc Industris rvd: Matrial Handlin utomotiv Food & vra ricultur nry Gnral Mchanical ninrin Rxnord Rxthltic low-maintnanc Rollr Chain contains low-friction chain joints and rovids lon rlubrication intrvals. This chain faturs hih dynamic loadin caabilitis, lon war lif and hih war rsistanc. ow maintnanc Du to th hih rformanc lon-trm lubrication th friction and th nd for maintnanc is rducd and th lubrication intrvals ar sinificantly lonr. This is idal in cas th maintnanc and lubrication ossibilitis ar limitd. Th scial coatin of th ins and bushs offrs a vry ood slidin charactristic. on war lif vn with minimum lubrication and undr havy loads th Rxnord Rxthltic Rollr Chain has a hih war rsistanc and a lon war lif. Th war lif is much lonr comard to standard chains. Th chain contains imrovd rotction aainst stiff joints and s. Hih dynamic loadin caability Th Rxnord Rxthltic Rollr Chain is idal for havy loadin alications in difficult conditions and in closd systms. It's also suitabl for situations whr hih fatiu rsistanc is rquird. Faturs and bnfits Outstandin triboloical charactristics xcllnt slidin rortis Hih fatiu strnth and chain traction comarabl with Rxnord Hih Prformanc Chains Imrovd rotction aainst chain joint stiffnss F H2 crtification for th food industry Chain sizs with itch from 12.7 millimtr (mm) to 50.8 mm availabl (scial sizs on rqust) Dimnsions in accordanc with DI, I and IO standards dvantas Rducd maintnanc and lonr lubrication intrvals Hih war rsistanc vn with inadquat lubrication xtndd war lif undr touh loadin conditions Cost-ffctiv ubrication Hih quality lon-trm lubricant o driin of lubricant Watr-rsistant Tmratur ran from 0 drs Clsius ( C) to +120 C Tmratur ran xtnsion from 40 C to + 250 C ossibl with hih- or low-tmratur lubricants 4

Rxnord Rxthltic Rollr Chain Rxthltic Rollr Cold-formd, shock-rsistant rollrs rotct th chain joint aainst shock loads Innr lat Hat-tratd and shot-nd sid lats incras th fatiu strnth of th chain Pin Th scial coatd ins ar quid with a hardnd layr which incrass war lif of th chain Outr lat Hat-tratd and shot-nd sid lats incras th fatiu strnth of th chain ush xtndd lubrication intrvals thanks to cold-formd, scial tratd bushins oadin caacity Hih loadin caacity War rsistanc Idal whr maintnanc and lubrication ossibilitis ar rstrictd onr maintnanc and lubrication intrvals on srvic lif co-frindly ss rlubrication ncssary Fr of chromium VI F H2 crtification Rxnord mts th rquirmnts of Machin Dirctiv 2006/42/C 5

uroan standard Rxnord Rxthltic Rollr Chain DI IO 606 (DI 8187) imlx rollr chain Chain o. Plat dth Transvrs itch Pin lnth Connctin in lnth arin ara Rquird minimum tnsil strnth DI / IO vra tnsil strnth Wiht traiht sidd lat oos arts F U F q Inch mm mm mm mm mm mm mm mm mm cm² k/m * * 08-1 T 0.50 12.7 7.75 8.51 4.45 11.30 11.6 17.0 20.9 0.50 17 800 21 000 0.7 x x x x 10-1 T 0.625 15.875 9.65 10.16 5.08 13.28 14.6 19.6 23.7 0.67 22 200 25 000 0.9 x x x x x 12-1 T 0.75 19.05 11.68 12.07 5.72 15.62 15.9 22.7 27.3 0.89 28 900 32 000 1.2 x x x x x 16-1 T 1.00 25.4 17.02 15.88 8.28 25.40 20.5 36.1 41.5 2.10 60 000 80 000 2.7 x x x x x 20-1 T 1.25 31.75 19.56 19.05 10.19 29.00 25.7 40.4 47.6 2.96 95 000 120 000 3.8 x x x x x 24-1 T 1.50 38.1 25.40 25.40 14.63 37.90 33.0 53.8 60.6 5.54 160 000 211 000 7.0 x x x x x 28-1 T 1.75 44.45 30.99 27.97 15.80 46.50 37.0 63.3 72.8 7.35 200 000 240 000 8.9 x x x x 32-1 T 2.00 50.8 30.99 29.21 17.81 45.50 41.2 65.1 73.6 8.10 250 000 315 000 9.9 x x x x x * oos arts ar roducd in Rxnord RxHiProthltic vrsion connctin with cli connctin crankd uroan standard Rxnord Rxthltic Rollr Chain DI IO 606 (DI 8187) Dulx rollr chain Chain o. Plat dth Transvrs itch Pin lnth Connctin in lnth arin ara Rquird minimum tnsil strnth DI / IO vra tnsil strnth Wiht traiht sidd lat oos arts F U F q Inch mm mm mm mm mm mm mm mm mm cm² k/m * * 08-2 T 0.50 12.7 7.75 8.51 4.45 11.30 11.6 13.92 30.6 34.9 1.01 31 100 43 000 1.4 x x x x 10-2 T 0.625 15.875 9.65 10.16 5.08 13.28 14.6 16.59 35.5 40.3 1.35 44 500 50 000 1.8 x x x x x 12-2 T 0.75 19.05 11.68 12.07 5.72 15.62 15.9 19.46 41.7 46.8 1.79 57 800 64 000 2.3 x x x x x 16-2 T 1.00 25.4 17.02 15.88 8.28 25.40 20.5 31.88 67.4 73.4 4.21 106 000 140 000 5.3 x x x x x 20-2 T 1.25 31.75 19.56 19.05 10.19 29.00 25.7 36.45 76.9 83.6 5.91 170 000 230 000 7.5 x x x x x 24-2 T 1.50 38.1 25.40 25.40 14.63 37.90 33.0 48.36 102.2 122.7 11.09 280 000 370 000 13.7 x x x x x 28-2 T 1.75 44.45 30.99 27.97 15.80 46.50 37.0 59.56 122.8 132.7 14.69 360 000 480 000 17.8 x x x x 32-2 T 2.00 50.8 30.99 29.21 17.81 45.50 41.2 58.55 123.6 132.4 16.21 450 000 530 000 19.6 x x x x x * oos arts ar roducd in Rxnord RxHiProthltic vrsion connctin with cli connctin crankd 6

uroan standard Rxnord Rxthltic Rollr Chain DI IO 606 (DI 8187) Chain o. Plat dth Transvrs itch Pin lnth Connctin in lnth arin ara Rquird minimum tnsil strnth DI / IO vra tnsil strnth Wiht traiht sidd lat Trilx rollr chain oos arts Rxthltic F U F q Inch mm mm mm mm mm mm mm mm mm cm² k/m * * 08-3 T 0.50 12.7 7.75 8.51 4.45 11.30 11.6 13.92 44.6 48.8 1.51 44 500 64 000 2.1 x x x x 10-3 T 0.625 15.875 9.65 10.16 5.08 13.28 14.6 16.59 52.2 56.9 2.02 66 700 75 000 2.7 x x x x x 12-3 T 0.75 19.05 11.68 12.07 5.72 15.62 15.9 19.46 61.3 66.3 2.68 86 700 96 000 3.7 x x x x x 16-3 T 1.00 25.4 17.02 15.88 8.28 25.40 20.5 31.88 99.3 105.3 6.31 160 000 210 000 7.9 x x x x x 20-3 T 1.25 31.75 19.56 19.05 10.19 29.00 25.7 36.45 113.4 121.2 8.87 250 000 340 000 11.2 x x x x x 24-3 T 1.50 38.1 25.40 25.40 14.63 37.90 33.0 48.36 150.5 160.4 16.63 425 000 560 000 20.4 x x x x x 28-3 T 1.75 44.45 30.99 27.97 15.80 46.50 37.0 59.56 182.3 192.2 22.04 530 000 720 000 26.7 x x x x 32-3 T 2.00 50.8 30.99 29.21 17.81 45.50 41.2 58.55 182.2 191.0 24.31 670 000 795 000 29.3 x x x x x * oos arts ar roducd in Rxnord RxHiProthltic vrsion connctin with cli connctin crankd 7

mrican standard Rxnord Rxthltic Rollr Chain DI IO 606 (DI 8188) imlx rollr chain mrican standard Rxnord Rxthltic Rollr Chain DI IO 606 (DI 8188) Dulx rollr chain Chain o. Plat dth Transvrs itch Pin lnth Connctin in lnth arin ara Rquird minimum tnsil strnth DI / IO vra tnsil strnth Wiht traiht sidd lat oos arts Chain o. Plat dth Transvrs itch Pin lnth Connctin in lnth arin ara Rquird minimum tnsil strnth DI / IO vra tnsil strnth Wiht traiht sidd lat oos arts F U F q Inch mm mm mm mm mm mm mm mm mm cm² k/m * ** * 60-1 T 0.75 19.05 12.57 11.91 5.94 17.70 17.7 25.7 28.6 1.05 31 300 40 000 1.5 x x x x x 80-1 T 1.00 25.4 15.75 15.88 7.92 22.50 23.5 33.0 38.0 1.78 55 600 65 000 2.6 x x x x x 100-1 T 1.25 31.75 18.90 19.05 9.53 27.40 29.2 39.4 44.9 2.61 87 000 105 000 4.0 x x x x 120-1 T 1.50 38.1 25.22 22.23 11.10 35.30 34.4 49.8 56.1 3.92 125 000 145 000 5.5 x x x x 140-1 T 1.75 44.45 25.22 25.40 12.70 37.00 40.8 53.4 59.3 4.70 170 000 220 000 7.5 x x x x 160-1 T 2.00 50.8 31.55 28.58 14.27 45.00 47.8 63.6 68.9 6.42 223 000 260 000 10.2 x x x x * oos arts ar roducd in Rxnord RxHiProthltic vrsion ** ot comatibl with straiht sidd lat rollr chain connctin with cli connctin crankd F U F q Inch mm mm mm mm mm mm mm mm mm cm² k/m * ** * 60-2 T 0.75 19.05 12.57 11.91 5.94 17.70 17.7 22.78 48.5 51.5 2.10 62 600 80 000 3.0 x x x x x 80-2 T 1.00 25.4 15.75 15.88 7.92 22.50 23.5 29.29 62.4 57.1 3.56 111 200 150 000 5.2 x x x x x 100-2 T 1.25 31.75 18.90 19.05 9.53 27.40 29.2 35.76 75.3 87.8 5.22 174 000 220 000 8.0 x x x x 120-2 T 1.50 38.1 25.22 22.23 11.10 35.30 34.4 45.44 95.3 101.6 7.84 250 000 290 000 11.0 x x x x 140-2 T 1.75 44.45 25.22 25.40 12.70 37.00 40.8 48.87 103.3 109.6 9.40 340 000 440 000 14.9 x x x x 160-2 T 2.00 50.8 31.55 28.58 14.27 45.00 47.8 58.55 122.1 130.1 12.84 446 000 490 000 20.2 x x x x * oos arts ar roducd in Rxnord RxHiProthltic vrsion ** ot comatibl with straiht sidd lat rollr chain connctin with cli connctin crankd 8

mrican standard Rxnord Rxthltic Rollr Chain DI IO 606 (DI 8188) Chain o. Plat dth Transvrs itch Pin lnth Connctin in lnth arin ara Rquird minimum tnsil strnth DI / IO vra tnsil strnth Wiht Trilx rollr chain traiht sidd lat oos arts Rxthltic F U F q Inch mm mm mm mm mm mm mm mm mm cm² k/m * * 60-3 T 0.75 19.05 12.57 11.91 5.94 17.70 17.7 22.78 72.6 77.2 3.15 93 900 120 000 4.5 x x x x 80-3 T 1.00 25.4 15.75 15.88 7.92 22.50 23.5 29.29 91.9 97.3 5.35 166 800 220 000 7.8 x x x x 100-3 T 1.25 31.75 18.90 19.05 9.53 27.40 29.2 35.76 111.1 117.2 7.83 261 000 300 000 12.0 x x x 120-3 T 1.50 38.1 25.22 22.23 11.10 35.30 34.4 45.44 140.7 148.3 11.75 375 000 450 000 16.5 x x x 140-3 T 1.75 44.45 25.22 25.40 12.70 37.00 40.8 48.87 151.2 158.5 14.10 510 000 660 000 22.3 x x x 160-3 T 2.00 50.8 31.55 28.58 14.27 45.00 47.8 58.55 180.7 188.7 19.26 669 000 730 000 30.3 x x x * oos arts ar roducd in Rxnord RxHiProthltic vrsion connctin with cli connctin 9

Rxnord RxHiPro Rollr Chain xtrm Prformanc Industris rvd: Food & vra ricultur Wood Matrial Handlin Rxnord RxHiPro Rollr Chain rovids vry ood corrosion rsistanc and faturs hih dynamic loadin caabilitis, an xtndd war lif and hih war rsistanc. nvironmntally frindly Th Rxnord RxHiPro Rollr Chain is nvironmntally frindly bcaus it s comltly fr from chromium VI and havy mtals, silicon and Tflon. Th chain lubrication has a F H2 crtification and th chain is conform to RoH:2011 standards an011/65/u, ROH and Dirctiv 2000/53/C. on workin lif Th Rxnord RxHiPro Rollr Chain is suitabl for wt conditions and thrfor can b usd outdoors. It has an xtrmly lon workin lif du to th anti-corrosion coatin for all chain arts and th hih strnth and lon-trm loadin caacity. xcllnt corrosion rsistanc nothr advanta of this chain is th xcllnt corrosion rsistanc. ll chain arts hav bn coatd with anti-corrosion substanc which maks th rsistanc intact for ovr 600 hours. Faturs and bnfits Corrosion rsistanc ovr 600 hours (salt sray tst conforms to DI IO 9227) Tnsil strnth and lon-trm loadin caacity comarabl with Rxnord RxPro Chain Dimnsions in accordanc with DI, I and IO-orm o rocss-rlatd hydron mbrittlmnt F H2 crtification RoH:2011 comliant for lctronics industry Fr from chromium VI, conform to uidlins 2011/65/U, ROH and Dirctiv 2000/53/C dvantas Corrosion-rsistant xcllnt rsistanc to liquids usd in th automotiv industry on war lif Cost-ffctiv ubrication Oratin tmratur: -30 C to +130 C With hih tmratur lubricants us is ossibl u to 250 C Us of Rxnord RxPro ubrication, fr from havy mtals, silicon and Tflon 10

Rxnord RxHiPro Rollr Chain Rollr Zinc-latd and cold-formd shock-rsistant rollr rotcts th chain joint aainst shock loads Innr lat cial-coatd, hat-tratd and shot-nd sid lats incras th fatiu rsistanc of th chain RxHiPro Pin Th ins ar coatd with zinc latin which incrass th corrosion rotction and maximizs roduction utim Outr lat cial-coatd, hat-tratd and shot-nd sid lats incras th fatiu rsistanc of th chain ush Zinc-latd, cold-formd bushs incras th corrosion rotction of th chain oadin caacity Hih loadin caacity War rsistanc rvicin intrvals as for Rxnord RxPro Rollr Chain co-frindly F H2 crtification Fr of chromium VI Dam corrosion rsistanc Outstandin corrosion rsistanc on srvic lif uitabl for th Food & vra industry Idal for outsid alications Rxnord mts th rquirmnts of Machin Dirctiv 2006/42/C 11

uroan standard Rxnord RxHiPro Rollr Chain DI IO 606 (DI 8187) imlx rollr chain Chain o.* Plat dth Transvrs itch Pin lnth Connctin in lnth arin ara Rquird minimum tnsil strnth DI / IO vra tnsil strnth Wiht traiht sidd lat oos arts F U F q Inch mm mm mm mm mm mm mm mm mm cm² k/m ** ** 08-1 HiPro 0.50 12.7 7.75 8.51 4.45 11.30 11.6-17.0 20.9 0.50 17 800 21 000 0.7 x x x x 10-1 HiPro 0.625 15.875 9.65 10.16 5.08 13.28 14.6-19.6 23.7 0.67 22 200 25 000 0.9 x x x x x 12-1 HiPro 0.75 19.05 11.68 12.07 5.72 15.62 15.9-22.7 27.3 0.89 28 900 32 000 1.2 x x x x x 16-1 HiPro 1.00 25.40 17.02 15.88 8.28 25.40 20.5-36.1 41.5 2.10 60 000 80 000 2.7 x x x x x 20-1 HiPro 1.25 31.75 19.56 19.05 10.19 29.00 25.7-40.4 47.6 2.96 95 000 120 000 3.8 x x x x x 24-1 HiPro 1.50 38.10 25.40 25.40 14.63 37.90 33.0-53.8 60.6 5.54 160 000 211 000 7.0 x x x x x 28-1 HiPro 1.75 44.45 30.99 27.97 15.80 46.50 37.0-63.3 72.8 7.35 200 000 240 000 8.9 x x x x 32-1 HiPro 2.00 50.80 30.99 29.21 17.81 45.50 41.2-65.1 73.6 8.10 250 000 315 000 9.9 x x x x x * lso availabl as trilx on rqust ** oos arts ar roducd in Rxnord RxHiProthltic vrsion connctin with srin connctin crankd with cottr in uroan standard Rxnord RxHiPro Rollr Chain DI IO 606 (DI 8187) Dulx rollr chain Chain o.* Plat dth Transvrs itch Pin lnth Connctin in lnth arin ara Rquird minimum tnsil strnth DI / IO vra tnsil strnth Wiht traiht sidd lat oos arts F U F q Inch mm mm mm mm mm mm mm mm mm cm² k/m ** ** 08-2 HiPro 0.50 12.7 7.75 8.51 4.45 11.30 11.6 13.92 30.6 34.9 1.01 31 100 43 000 1.4 x x x x 10-2 HiPro 0.625 15.875 9.65 10.16 5.08 13.28 14.6 16.59 35.5 40.3 1.35 44 500 50 000 1.8 x x x x x 12-2 HiPro 0.75 19.05 11.68 12.07 5.72 15.62 15.9 19.46 41.7 46.8 1.79 57 800 64 000 2.3 x x x x x 16-2 HiPro 1.00 25.4 17.02 15.88 8.28 25.40 20.5 31.88 67.4 73.4 4.21 106 000 140 000 5.3 x x x x x 20-2 HiPro 1.25 31.75 19.56 19.05 10.19 29.00 25.7 36.45 76.9 83.6 5.91 170 000 230 000 7.5 x x x x x 24-2 HiPro 1.50 38.1 25.40 25.40 14.63 37.90 33.0 48.36 102.2 122.7 11.09 280 000 370 000 13.7 x x x x x 28-2 HiPro 1.75 44.45 30.99 27.97 15.80 46.50 37.0 59.56 122.8 132.7 14.69 360 000 480 000 17.8 x x x x 32-2 HiPro 2.00 50.8 30.99 29.21 17.81 45.50 41.2 58.55 123.6 132.4 16.21 450 000 530 000 19.6 x x x x x * lso availabl as trilx on rqust ** oos arts ar roducd in Rxnord RxHiProthltic vrsion connctin with srin connctin crankd with cottr in 12

mrican standard Rxnord RxHiPro Rollr Chain DI IO 606 (DI 8188) imlx rollr chain Chain o.* Plat dth Transvrs itch Pin lnth Connctin in lnth arin ara Rquird minimum tnsil strnth DI / IO vra tnsil strnth Wiht traiht sidd lat oos arts F U F q Inch mm mm mm mm mm mm mm mm mm cm² k/m ** *** ** 60-1 HiPro 0.75 19.05 12.57 11.91 5.94 17.70 17.7 25.7 28.6 1.05 31 300 40 000 1.5 x x x x x 80-1 HiPro 1.00 25.4 15.75 15.88 7.92 22.50 23.5 33.0 38.0 1.78 55 600 65 000 2.6 x x x x x 100-1 HiPro 1.25 31.75 18.90 19.05 9.53 27.40 29.2 39.4 44.9 2.61 87 000 105 000 4.0 x x x x 120-1 HiPro 1.50 38.1 25.22 22.23 11.10 35.30 34.4 49.8 56.1 3.92 125 000 145 000 5.5 x x x x 140-1 HiPro 1.75 44.45 25.22 25.40 12.70 37.00 40.8 53.4 59.3 4.70 170 000 220 000 7.5 x x x x 160-1 HiPro 2.00 50.8 31.55 28.58 14.27 45.00 47.8 63.6 68.9 6.42 223 000 260 000 10.2 x x x x * lso availabl as trilx on rqust ** oos arts ar roducd in Rxnord RxHiProthltic vrsion *** ot comatibl with straiht sidd lat rollr chain RxHiPro connctin with srin connctin crankd with cottr in mrican standard Rxnord RxHiPro Rollr Chain DI IO 606 (DI 8188) Dulx rollr chain Chain o.* Plat dth Transvrs itch Pin lnth Connctin in lnth arin ara Rquird minimum tnsil strnth DI / IO vra tnsil strnth Wiht traiht sidd lat oos arts F U F q Inch mm mm mm mm mm mm mm mm mm cm² k/m ** *** ** 60-2 HiPro 0.75 19.05 12.57 11.91 5.94 17.70 17.7 22.78 48.5 51.5 2.10 62 600 80 000 3.0 x x x x x 80-2 HiPro 1.00 25.4 15.75 15.88 7.92 22.50 23.5 29.29 62.4 57.1 3.56 111 200 150 000 5.2 x x x x x 100-2 HiPro 1.25 31.75 18.90 19.05 9.53 27.40 29.2 35.76 75.3 87.8 5.22 174 000 220 000 8.0 x x x x 120-2 HiPro 1.50 38.1 25.22 22.23 11.10 35.30 34.4 45.44 95.3 101.6 7.84 250 000 290 000 11.0 x x x x 140-2 HiPro 1.75 44.45 25.22 25.40 12.70 37.00 40.8 48.87 103.3 109.6 9.40 340 000 440 000 14.9 x x x x 160-2 HiPro 2.00 50.8 31.55 28.58 14.27 45.00 47.8 58.55 122.1 130.1 12.84 446 000 490 000 20.2 x x x x * lso availabl as trilx on rqust ** oos arts ar roducd in Rxnord RxHiProthltic vrsion *** ot comatibl with straiht sidd lat rollr chain connctin with srin connctin crankd with cottr in 13

Rxnord RxHiProthltic Rollr Chain xtrm Prformanc Industris rvd: Food & vra ricultur Wood Matrial Handlin Rxnord RxHiProthltic Rollr Chain is a combination of Rxnord RxHiPro and Rxthltic chain tys. It rovids th vry ood corrosion rsistanc of th RxHiPro and th hih war rsistanc of th Rxthltic. on-trm corrosion rsistanc vry sinl art of th Rxnord RxHiProthltic Rollr Chain has a scial corrosion-rsistant coatin. Hih loadin caability Thanks to th imrovd rotction aainst chain joint stiffnss and th hih fatiu rsistanc, th Rxnord RxHiProthltic Rollr Chain has a hih loadin caability. Th chain is idal for havy loadin alications in rouh nvironmnts. ow maintnanc Th chain rquirs low maintnanc thanks to th hih rformanc and th lon-trm lubrication. This maks th Rxnord RxHiProthltic Chain idal for alications whr maintnanc and lubrication ossibilitis ar rstrictd. Faturs and bnfits 14 Outstandin triboloical charactristics xcllnt slidin rortis Fatiu rsistanc and chain traction comarabl with Rxnord Hih Prformanc chain nti-corrosion coatin for all chain arts. Imrovd rotction aainst chain joint stiffnss F H1 crtification for th food industry Chain sizs with itch from 12.7 mm to 50.8 mm availabl (scial sizs on rqust) Dimnsions in accordanc with DI, I and IO standards dvantas Rducd maintnanc rquirmnts and lonr lubrication intrvals xcllnt corrosion rsistanc Hih war rsistanc vn with inadquat lubrication on srvic lif undr touh loadin conditions lication Whr maintnanc and lubrication ossibilitis ar rstrictd Hih loads undr difficult conditions Wt and outdoor usa Food, bvra, and ackain industris musmnt arks ricultur and forstry machinry nclosd systms

Rxnord RxHiProthltic Rollr Chain Innr lat Corrosion rsistanc coatd hat-tratd and shot-nd sid lats incras th fatiu rsistanc of th chain Rollr Corrosion rsistanc coatd cold-formd shock-rsistanc rollr incrass th load barin charactristics of th chain Pin Th scial coatd ins ar furnishd with an otimally d hardnss layr that incrass war rsistanc and roduction utim RxHiProthltic Outr lat Fatiu-rsistant, corrosion-rsistant ush cial coatd bush with hih intrfrnc rss fits ratly incrass fatiu strnth and rovids surior war lif and lss downtim oadin caacity Hih loadin caacity War rsistanc ow maintnanc xtrmly lon srvic lif Good mrncy runnin rortis co-frindly ss rlubrication ncssary Fr of chromium VI F H1 crtification Dam corrosion rsistanc Outstandin corrosion rsistanc uitabl for th food & bvra industry Idal for outsid alications Rxnord mts th rquirmnts of Machin Dirctiv 2006/42/C 15

uroan standard Rxnord RxHiProthltic Rollr Chain DI IO 606 (DI 8187) imlx rollr chain Chain o. Plat dth Transvrs itch Pin lnth Connctin in lnth arin ara Rquird minimum tnsil strnth DI / IO vra tnsil strnth Wiht traiht sidd lat oos arts F U F q Inch mm mm mm mm mm mm mm mm mm cm² k/m * * 08-1 HiProT 0.50 12.7 7.75 8.51 4.45 11.30 11.6-17.0 20.9 0.50 17 800 21 000 0.7 x x x x 10-1 HiProT 0.625 15.875 9.65 10.16 5.08 13.28 14.6-19.6 23.7 0.67 22 200 25 000 0.9 x x x x x 12-1 HiProT 0.75 19.05 11.68 12.07 5.72 15.62 15.9-22.7 27.3 0.89 28 900 32 000 1.2 x x x x x 16-1 HiProT 1.00 25.40 17.02 15.88 8.28 25.40 20.5-36.1 41.5 2.10 60 000 80 000 2.7 x x x x x 20-1 HiProT 1.25 31.75 19.56 19.05 10.19 29.00 25.7-40.4 47.6 2.96 95 000 120 000 3.8 x x x x x 24-1 HiProT 1.50 38.10 25.40 25.40 14.63 37.90 33.0-53.8 60.6 5.54 160 000 211 000 7.0 x x x x x 28-1 HiProT 1.75 44.45 30.99 27.97 15.80 46.50 37.0-63.3 72.8 7.35 200 000 240 000 8.9 x x x x 32-1 HiProT 2.00 50.80 30.99 29.21 17.81 45.50 41.2-65.1 73.6 8.10 250 000 315 000 9.9 x x x x x * oos arts ar roducd in Rxnord RxHiProthltic vrsion connctin with srin connctin crankd with cottr in uroan standard Rxnord RxHiProthltic Rollr Chain DI IO 606 (DI 8187) Dulx rollr chain Chain o. Plat dth Transvrs itch Pin lnth Connctin in lnth arin ara Rquird minimum tnsil strnth DI / IO vra tnsil strnth Wiht traiht sidd lat oos arts F U F q Inch mm mm mm mm mm mm mm mm mm cm² k/m * * 08-2 HiProT 0.50 12.7 7.75 8.51 4.45 11.30 11.6 13.92 30.6 34.9 1.01 31 100 43 000 1.4 x x x x 10-2 HiProT 0.625 15.875 9.65 10.16 5.08 13.28 14.6 16.59 35.5 40.3 1.35 44 500 50 000 1.8 x x x x x 12-2 HiProT 0.75 19.05 11.68 12.07 5.72 15.62 15.9 19.46 41.7 46.8 1.79 57 800 64 000 2.3 x x x x x 16-2 HiProT 1.00 25.4 17.02 15.88 8.28 25.40 20.5 31.88 67.4 73.4 4.21 106 000 140 000 5.3 x x x x x 20-2 HiProT 1.25 31.75 19.56 19.05 10.19 29.00 25.7 36.45 76.9 83.6 5.91 170 000 230 000 7.5 x x x x x 24-2 HiProT 1.50 38.1 25.40 25.40 14.63 37.90 33.0 48.36 102.2 122.7 11.09 280 000 370 000 13.7 x x x x x 28-2 HiProT 1.75 44.45 30.99 27.97 15.80 46.50 37.0 59.56 122.8 132.7 14.69 360 000 480 000 17.8 x x x x 32-2 HiProT 2.00 50.8 30.99 29.21 17.81 45.50 41.2 58.55 123.6 132.4 16.21 450 000 530 000 19.6 x x x x x * oos arts ar roducd in Rxnord RxHiProthltic vrsion connctin with srin connctin crankd with cottr in 16

mrican standard Rxnord RxHiProthltic Rollr Chain DI IO 606 (DI 8188) imlx rollr chain Chain o. Plat dth Transvrs itch Pin lnth Connctin in lnth arin ara Rquird minimum tnsil strnth DI / IO vra tnsil strnth Wiht traiht sidd lat oos arts F U F q Inch mm mm mm mm mm mm mm mm mm cm² k/m * ** * 60-1 HiProT 0.75 19.05 12.57 11.91 5.94 17.70 17.7 25.7 28.6 1.05 31 300 40 000 1.5 x x x x x 80-1 HiProT 1.00 25.4 15.75 15.88 7.92 22.50 23.5 33.0 38.0 1.78 55 600 65 000 2.6 x x x x x 100-1 HiProT 1.25 31.75 18.90 19.05 9.53 27.40 29.2 39.4 44.9 2.61 87 000 105 000 4.0 x x x x 120-1 HiProT 1.50 38.1 25.22 22.23 11.10 35.30 34.4 49.8 56.1 3.92 125 000 145 000 5.5 x x x x 140-1 HiProT 1.75 44.45 25.22 25.40 12.70 37.00 40.8 53.4 59.3 4.70 170 000 220 000 7.5 x x x x 160-1 HiProT 2.00 50.8 31.55 28.58 14.27 45.00 47.8 63.6 68.9 6.42 223 000 260 000 10.2 x x x x * oos arts ar roducd in Rxnord RxHiProthltic vrsion ** ot comatibl with straiht sidd lat rollr chain RxHiProthltic connctin with srin connctin crankd with cottr in mrican standard Rxnord RxHiProthltic Rollr Chain DI IO 606 (DI 8188) Dulx rollr chain Chain o. Plat dth Transvrs itch Pin lnth Connctin in lnth arin ara Rquird minimum tnsil strnth DI / IO vra tnsil strnth Wiht traiht sidd lat oos arts F U F q Inch mm mm mm mm mm mm mm mm mm cm² k/m * ** * 60-2 HiProT 0.75 19.05 12.57 11.91 5.94 17.70 17.7 22.78 48.5 51.5 2.10 62 600 80 000 3.0 x x x x x 80-2 HiProT 1.00 25.4 15.75 15.88 7.92 22.50 23.5 29.29 62.4 57.1 3.56 111 200 150 000 5.2 x x x x x 100-2 HiProT 1.25 31.75 18.90 19.05 9.53 27.40 29.2 35.76 75.3 87.8 5.22 174 000 220 000 8.0 x x x x 120-2 HiProT 1.50 38.1 25.22 22.23 11.10 35.30 34.4 45.44 95.3 101.6 7.84 250 000 290 000 11.0 x x x x 140-2 HiProT 1.75 44.45 25.22 25.40 12.70 37.00 40.8 48.87 103.3 109.6 9.40 340 000 440 000 14.9 x x x x 160-2 HiProT 2.00 50.8 31.55 28.58 14.27 45.00 47.8 58.55 122.1 130.1 12.84 446 000 490 000 20.2 x x x x * oos arts ar roducd in Rxnord RxHiProthltic vrsion ** ot comatibl with straiht sidd lat rollr chain connctin with srin connctin crankd with cottr in 17

Rxnord RXtrm Rollr Chain xtrm Prformanc Industris rvd: utomotiv Tub Transort Gnral Mchanical ninrin Rxnord RXtrm Rollr Chain is a maintnanc-fr rollr chain for scial alications. Crtain tratmnts and synthtic hih rformanc x-works lubrication rovid vry ood slidin charactristics for maintnanc-fr orations. Maintnanc-fr Du to th hih rformanc and lon-trm lubrication th nd for maintnanc and rlubrication is not ncssary anymor. This is idal in cas th maintnanc and lubrication ossibilitis ar limitd. scial coatin in th chain joint offrs xcllnt slidin charactristics. on war lif vn with minimum lubrication and scially for convyor alications th Rxnord RXtrm Rollr Chain can b usd maintnanc-fr. Th chain contains imrovd rotction aainst stiff joints and s. Vry ood corrosion rsistanc nothr advanta of this chain is th outstandin corrosion rsistanc. Th chain has bn coatd with anti-corrosion substanc which maks th rsistanc intact for ovr 120 hours. cial lubrication Th scial Rxnord RXtrm ubrication is arovd for convyor and ovn chains in aintin aras as wll as for all othr alications in th car body aint sho. Faturs and bnfits Outstandin triboloical charactristics xcllnt slidin rortis Hih fatiu strnth and chain traction comarabl with Rxnord Hih Prformanc Chain Imrovd rotction aainst chain joint stiffnss Chain sizs with itch from 12.7 millimtr (mm) to 25.4 mm availabl (scial sizs on rqust) Corrosion rsistanc ovr 120 hours (salt sray tst conforms to DI IO 9227) o rocss-rlatd hydron mbrittlmnt Fr of chromium VI: conform to uidlins 2011/65/U, ROH and Dirctiv 2000/53/C Dimnsions in accordanc with DI, I and IO standards dvantas xtrmly lon srvic lif, vn without rlubrication Du to th otimal x-works lubrication, no contamination of convyd oods and surroundin ara occurs ood ric-rformanc ratio Hih nry fficincy ubrication Hih rformanc and hih tmratur synthtic lubricant Tmratur ran from -5 C to +250 C Fr of silicon scially dvlod for automotiv aintin alication Paint comatibl lubrication 18

Rxnord RXtrm Rollr Chain Rollr Cold-formd, coatd shock-rsistant rollrs rotct th chain joint aainst shock loads and rovids ood slidin charactristics Innr lat cial coatd, hat-tratd and shot-nd sid lats incras th fatiu rsistanc of th chain Pin War-rsistant, with ood slidin charactristics RXtrm Outr lat cial coatd, hat-tratd and shot-nd sid lats incras th fatiu rsistanc of th chain ush xtndd lubrication intrvals thanks to cold-formd, scial tratd bushins oadin caacity Hih loadin caacity undr hih tmratur War rsistanc Maintnanc-fr xtrmly lon srvic lif Idal whr maintnanc and lubrication ossibilitis ar rstrictd co-frindly o rlubrication ncssary Fr of chromium VI 19

Rcommndd chain tractiv owr for aroriat sds* Chain o. u to 0,25 m/s tmratur ran from -5 C to +120 C admissibl tractiv owr for u to 0,5 m/s u to 1,0 m/s u to 0,25 m/s tmratur ran +120 C to +250 C admissibl tractiv owr for u to 0,5 m/s u to 1,0 m/s 08-1 XT 850 600 450 500 400 300 10-1 XT 1200 850 600 700 550 400 12-1 XT 1500 1100 800 800 700 500 16-1 XT 3500 2700 1900 2100 1600 1100 08-2 XT 1400 1000 700 800 700 500 10-2 XT 2100 1400 1000 1200 900 700 12-2 XT 2600 1900 1400 1500 1200 800 16-2 XT 6100 4700 3300 3600 2500 1900 * Valid for minimum cntr distanc of 1500 mm 20

uroan standard Rxnord RXtrm Rollr Chain DI IO 606 (DI 8187) imlx rollr chain Chain o.* Plat dth Transvrs itch Pin lnth Connctin in lnth arin ara Rquird minimum tnsil strnth DI / IO vra tnsil strnth Wiht traiht sidd lat oos arts F U F q Inch mm mm mm mm mm mm mm mm mm cm² k/m ** ** 08-1 XT 0.50 12.7 7.75 8.51 4.45 11.30 11.6-16.7 20.9 0.50 17 800 21 000 0.7 x x x x 10-1 XT 0.625 15.875 9.65 10.16 5.08 13.28 14.6-18.9 23.7 0.67 22 200 25 000 0.9 x x x x x 12-1 XT 0.75 19.05 11.68 12.07 5.72 15.62 15.9-22.3 27.3 0.89 28 900 32 000 1.2 x x x x x 16-1 XT 1.00 25.40 17.02 15.88 8.28 25.40 20.5-35.4 41.5 2.10 60 000 80 000 2.7 x x x x x * arr sizs availabl on rqust ** oos arts ar roducd in Rxnord RxHiProthltic vrsion connctin with srin connctin crankd with cottr in uroan standard Rxnord RXtrm Rollr Chain DI IO 606 (DI 8187) Dulx rollr chain Chain o.* Plat dth Transvrs itch Pin lnth Connctin in lnth arin ara Rquird minimum tnsil strnth DI / IO vra tnsil strnth Wiht traiht sidd lat oos arts RXtrm F U F q Inch mm mm mm mm mm mm mm mm mm cm² k/m ** ** 08-2 XT 0.50 12.7 7.75 8.51 4.45 11.30 11.6 13.92 30.6 34.9 1.01 31 100 43 000 1.4 x x x x 10-2 XT 0.625 15.875 9.65 10.16 5.08 13.28 14.6 16.59 35.5 40.3 1.35 44 500 50 000 1.8 x x x x x 12-2 XT 0.75 19.05 11.68 12.07 5.72 15.62 15.9 19.46 41.7 46.8 1.79 57 800 64 000 2.3 x x x x x 16-2 XT 1.00 25.4 17.02 15.88 8.28 25.40 20.5 31.88 67.4 73.4 4.21 106 000 140 000 5.3 x x x x x * arr sizs availabl on rqust ** oos arts ar roducd in Rxnord RxHiProthltic vrsion connctin with srin connctin crankd with cottr in 21

Rxnord RxCarbon Rollr Chain xtrm Prformanc Industris rvd: utomotiv Food & vra Cosmtics / Pharmacy Packain Industry Rxnord RxCarbon maintnanc-fr Rollr Chain contains RxCarbon slidin slvs that rquir no rlubrication. This chain roducs lss nois comard to sintrbush chain. Maintnanc-fr Th hih-tch thrmolastic bushs in th Rxnord RxCarbon Rollr Chain tak ovr th function of lubrication. Thanks to th low friction in th chain, no maintnanc is ndd. You won t xrinc any downtim in your roduction cycl. Hih war rsistanc Th chain is vry robust, it contains cas hardnd ins and th slidin surfac of th chain joint itslf has war-minimizin charactristics. Tothr with th low friction in th chain, this rsults in a hih war rsistanc of th chain. Imrovd safty Th Rxnord RxCarbon Rollr Chain maks it ossibl to crat an xtra saf and clan workin nvironmnt sinc thr is no lubrication ndd. nvironmntally frindly Th chain is nvironmntally frindly sinc thr is no rlubrication ndd. It's comltly fr of silicon and Tflon and diffrntiats itslf by its low-nois runnin. Faturs and bnfits Outstandin triboloical charactristics Hih war rsistanc Hih-tch carbon slidin slvs xtrmly robust F H1 crtification ow-friction chain barin Rlubrication is not rquird altouh it rducs friction in th alication dvantas xtrmly lon srvic lif, vn without rlubrication o machin downtim for rlubrication ow-nois and co-frindly Hih nry fficincy ubrication With food-rad x-works lubrication Tmratur ran from -40 C to +120 C For tmraturs from +120 C to +175 C las consult Rxnord ninrin aint-comatibl lubrication is availabl uon rqust 22

Rxnord RxCarbon Rollr Chain Rollr Cold-formd, shock-rsistant rollrs rotct th chain joint aainst shock loads Innr lat Hat-tratd and shot-nd sid lats for hih fatiu strnth of th chain Pin Th ins ar quid with a hardnd layr which incrass war lif of th chain Outr lat Hat-tratd and shot-nd sid lats for hih fatiu strnth of th chain, silvr color RxCarbon slidin slvs Hih-tch slidin slvs tak ovr th lubrication film function liminatin th nd for rlubrication ush Cold-formd, hat-tratd bushs for surior war lif RxCarbon oadin caacity Idal for critical conditions War rsistanc Maintnanc-fr xtrmly lon srvic lif Vry ood war rsistanc rortis co-frindly o rlubrication ncssary ow-nois x-works lubrication with F H1 crtification Rxnord mts th rquirmnts of Machin Dirctiv 2006/42/C 23

Rcommndd chain tractiv owr for aroriat sds Chain o. u to 0,5 m/s tmratur ran from - 40 C to + 80 C admissibl tractiv owr for u to 1,0 m/s u to 1,5 m/s u to 2,0 m/s tmratur ran + 80 C to + 120 C * admissibl tractiv owr for u to 0,5 m/s u to 1,0 m/s 08-1 C 850 750 650 500 680 600 10-1 C 1100 1000 900 670 880 800 12-1 C 1500 1300 1100 890 1200 1040 16-1 C 3500 3100 2700 2100 2800 2480 08-2 C 1500 1300 1100 900 1200 1000 10-2 C 1900 1800 1600 1200 1500 1400 12-2 C 2600 2300 1900 1600 2100 1800 16-2 C 6100 5400 4700 3700 4900 4300 * For tmraturs abov +120 C las consult Rxnord ninrin (availabl u to +175 C) 24

uroan standard Rxnord RxCarbon Rollr Chain DI IO 606 (DI 8187)* imlx rollr chain Chain o. Plat dth Transvrs itch Pin lnth Connctin in lnth arin ara vra tnsil strnth Wiht traiht sidd lat oos arts F q Inch mm mm mm mm mm mm mm mm mm cm² k/m 08-1 C 0.50 12.7 7.75 8.51 4.45 11.30 11.6 16.7 20.0 0.50 17 000 0.70 x x x 10-1 C 0.625 15.875 9.65 10.16 5.08 13.28 14.6 18.9 23.7 0.67 20 000 0.90 x x x x 12-1 C 0.75 19.05 11.68 12.07 5.72 15.62 15.9 22.3 27.3 0.89 31 500 1.15 x x x x 16-1 C 1.00 25.4 17.02 15.88 8.28 25.40 20.5 35.4 41.5 2.10 64 500 2.60 x x x x * Dviatd ultimat tnsil strnth and lnth intolranc (u to +0.3%) connctin with srin connctin with cottr in crankd uroan standard Rxnord RxCarbon Rollr Chain DI IO 606 (DI 8187)* Dulx rollr chain Chain o. Plat dth Transvrs itch Pin lnth Connctin in lnth arin ara vra tnsil strnth Wiht F q Inch mm mm mm mm mm mm mm mm mm cm² k/m 08-2 C 0.50 12.7 7.75 8.51 4.45 11.30 11.6 13.92 30.6 34.9 1.01 31 500 1.4 x x x 10-2 C 0.625 15.875 9.65 10.16 5.08 13.28 14.6 16.59 35.5 40.3 1.35 40 000 1.8 x x x x 12-2 C 0.75 19.05 11.68 12.07 5.72 15.62 15.9 19.46 41.7 46.8 1.79 63 000 2.3 x x x x 16-2 C 1.00 25.4 17.02 15.88 8.28 25.40 20.5 31.88 67.4 73.4 4.21 118 500 5.3 x x x x * Dviatd ultimat tnsil strnth and lnth intolranc (u to +0.3%) traiht sidd lat oos arts RxCarbon connctin with cli connctin crankd 25

Rxnord RxProX Rollr Chain xtrm Prformanc Industris rvd: Minin & Mtals Cmnt & rat Forstry ricultur oistics & Transortation Construction Rxnord RxProX load-rsistant Rollr Chain rovids hih static and dynamic loadin caabilitis and rliabilitis. Thrfor a lon war lif, hih brakin load and fatiu rsistanc is rantd. nvironmntally frindly Th chain contains no havy mtals, no Tflon or silicon. This rsults in an nvironmntally frindly roduct that is DI IO 14001 crtifid. Hih loadin caacity In situations whr havy drivs and liftin alications ar ndd, this chain is idal. It has a hih loadin caacity in combination with maximum orational safty. xtrm hih fatiu rsistanc Th Rxnord RxProX Rollr Chain is vry robust, vn in difficult conditions. It has an xtrmly hih imact strnth du to calibratd lats, rinforcd chain s and th samlss rollrs. Throuh Rxnord RxPro ubrication th chain is rotctd. ll ths factors rsult in an xtrm hih fatiu rsistanc. Faturs and bnfits nlard barin ara Imrovd tnsil strnth Outstandin fatiu rsistanc Comatibl with uroan tys ubrication xcllnt rotction throuh RxPro ubrication Oratin tmratur ran: -30 C to +130 C (can b xtndd -40 C to +250 C) Contains no havy mtals; Tflon- and silicon-fr dvantas For hih-rformanc owr transmission Vry hih imact strnth xtrmly robust, vn undr difficult conditions 26

Rxnord RxProX Rollr Chain Rollr Cold-formd shock-rsistant rollrs rotct th chain joint aainst shock loads Innr lat Rinforcd hat-tratd and shot-nd sid lats incras th fatiu strnth of th chain Pin Rxnord RxProX Rollr Chain is quid with a scial in for hih shock loads and otimizd war rortis Outr lat Rinforcd hat-tratd and shot-nd sid lats incras th fatiu strnth of th chain ush Cold-formd, hat-tratd bushs for surior war lif oadin caacity War rsistanc co-frindly RxProX For th havy-duty drivs and liftin uross Hih rotction throuh Rxord RxPro ubrication Contains no havy mtals; Tflon and silicon fr xtrmly hih loadin caacity xtrmly robust on srvic lif Rxnord mts th rquirmnts of Machin Dirctiv 2006/42/C 27

Rxnord RxProX Rollr Chain for havy-duty drivs and liftin uross imlx rollr chain Chain o. * Plat dth Transvrs itch Pin lnth Connctin in lnth arin ara Minimum tnsil strnth vra tnsil strnth Wiht traiht sidd lat oos arts - F U F q Inch mm mm mm mm mm mm - mm mm cm² k/m C R 480 0.75 19.05 11.68 12.07 6.10 17.23 16.8-25.0 29.5 1.05 40 000 50 000 1.5 x x x x x KRV 12 1.00 25.4 12.70 19.05 10.19 25.70 24.0-40.1 45.5 2.62 117 500 140 000 4.4 x x x R 25-1 H 1.00 25.4 17.02 15.88 8.28 25.40 24.0-35.4 38.5 2.10 85 000 105 000 3.2 x x x x x R 31-1 H 1.25 31.75 19.56 19.05 10.19 32.00 29.2-45.8 49.6 3.26 150 000 170 000 5.3 x x x R 38-1 H 1.50 38.10 25.40 25.40 14.63 40.00 36.2-56.7 63.3 5.85 235 000 250 000 8.7 x x x R 44-1 H 1.75 44.45 30.99 27.97 15.90 46.50 40.8-66.3 73.7 7.39 270 000 300 000 10.4 x x x R 50-1 H 2.00 50.8 30.99 29.21 17.81 45.50 47.8-66.5 75.0 8.10 385 000 415 000 11.5 x x x * also availabl in larr sizs and as trilx on rqust connctin with srin connctin crankd with cottr in C doubl crankd Rxnord RxProX Rollr Chain for havy-duty drivs and liftin uross Dulx rollr chain Chain o. * Plat dth Transvrs itch Pin lnth Connctin in lnth arin ara Minimum tnsil trnth vra tnsil strnth Wiht traiht sidd lat oos arts F U F q Inch mm mm mm mm mm mm mm mm mm cm² k/m C R 25-2 H 1.00 25.40 17.02 15.88 8.28 25.40 24.0 31.88 67.4 70.7 4.21 170 000 190 000 6.4 x x x x x R 31-2 H 1.25 31.75 19.56 19.05 10.19 32.00 29.2 42.00 87.8 91.6 6.52 260 000 300 000 10.4 x x x R 38-2 H 1.50 38.10 25.40 25.40 14.63 40.00 36.2 52.00 108.7 115.3 11.70 450 000 500 000 17.0 x x x R 44-2 H 1.75 44.45 30.99 27.97 15.90 46.50 40.8 61.20 127.5 134.9 14.79 465 000 525 000 20.5 x x x R 50-2 H 2.00 50.80 30.99 29.21 17.81 45.50 47.8 60.20 126.7 135.2 16.21 650 000 725 000 22.5 x x x * also availabl in larr sizs and as trilx on rqust connctin with srin connctin with cottr in crankd with cottr in C doubl crankd 28

Food Ima Rxnord RxPlus Rollr Chain xtrm Prformanc Industris rvd: Food & vra Pul & Par Matrial Handlin Rxnord RxPlus Rollr Chain rovids outstandin war rsistanc and vry ood acid and corrosion rotction. Rust- and acid-rsistant Th Rxnord RxPlus Rollr Chain consists of xtrmly rust- and acid-rsistant matrials. This maks it ossibl to us th chain in watr, stam and arssiv liquids without damain th chain. t th sam tim, du to th hat-tratmnt of th ins, th war lif of this chain is sinificantly lonr than othr corrosion-rsistant chains. stability list is availabl uon rqust. Maximum hyin Whr strict hyinic conditions or watr is a factor and corrosion-fr matrial is ndd, Rxnord RxPlus Rollr Chain offrs surior rformanc. Dirct food contact is rmittd. This maks it th bst choic for th Food & vra industry. on srvic lif lon srvic lif is rantd du to th scial stl usd in th chain. Tothr with th hat-tratd in, this stl nsurs a hih war rsistanc and lon war liftim. Faturs and bnfits Mad from matrials with xcllnt rust- and acid-rsistant rortis Hih loadin caacity at sds u to aroximatly 1.5 mtr / scond amlss bushs F H1 crtification Patntd scial stl Hih mchanical stability Prfct to us in xtrm conditions dvantas Hih war rsistanc Hyinic Rsistant to watr and stam Dirct contact with foodstuffs rmittd on srvic lif ubrication With food-rad lubricant Tmratur ran: -40 C to +120 C (xtnsion from +120 C to +400 C ossibl) lso availabl without x-works lubrication RxPlus 29

Rxnord RxPlus Rollr Chain Rollr Corrosion-rsistant, cold-formd rollrs rotct th chain joint aainst shock loads Innr lat Th scial corrosion-rsistant RxPlus matrial of th sid lats incras th fatiu charactristics of th chain Pin Th scial hat-tratd in incrass war rsistanc and roduction utim Outr lat Th scial corrosion-rsistant RxPlus matrial of th sid lats incras th fatiu charactristics of th chain ush amlss cold-formd bushs rovid surior war lif and lss downtim War rsistanc on srvic lif Hihly rliabl co-frindly F H1 crtification Dam corrosion rsistanc Watr and stam Fulfills hyin rquirmnts cid corrosion rsistanc For xtrm conditions xcllnt rsistanc to acids and arssiv liquids Rxnord mts th rquirmnts of Machin Dirctiv 2006/42/C 30

Rcommndd chain tractiv owr for aroriat sds Chain o. u to 0,5 m/s tmratur ran - 40 C to + 200 C admissibl tractiv owr for u to 1,0 m/s u to 1,5 m/s u to 2,0 m/s tmratur ran + 200 C to + 400 C admissibl tractiv owr for u to 0,5 m/s u to 1,0 m/s 08-1 850 750 650 500 530 470 10-1 1100 1000 900 670 690 630 12-1 1500 1300 1100 890 940 810 16-1 3500 3100 2700 2100 2200 1900 08-2 1500 1300 1100 900 900 800 10-2 1900 1800 1600 1200 1200 1100 12-2 2600 2300 1900 1600 1600 1400 16-2 6100 5400 4700 3700 3800 3400 08-3 2100 1900 1600 1300 1300 1200 10-3 2800 2500 2300 1700 1800 1600 12-3 3800 3300 2800 2200 2400 2100 16-3 8800 7800 6800 5300 5500 4900 RxPlus 31

uroan standard Rxnord RxPlus Rollr Chain mad of stainlss stl imlx rollr chain Chain o. Plat dth Transvrs itch Pin lnth Connctin in lnth arin ara vra tnsil strnth Wiht traiht sidd lat oos arts F q Inch mm mm mm mm mm mm mm mm mm cm² k/m C* * 08-1 0.50 12.7 7.75 8.51 4.45 11.30 11.6 16.7 19.0 0.50 12 000 0.7 x x x x x 10-1 0.625 15.875 9.65 10.16 5.08 13.28 14.6 18.9 22.0 0.67 15 500 0.9 x x x x x 12-1 0.75 19.05 11.68 12.07 5.72 15.62 15.9 22.3 25.1 0.89 17 500 1.15 x x x x x x x 16-1 1.00 25.4 17.02 15.88 8.28 25.40 20.8 35.4 40.8 2.10 44 000 2.6 x x x x x x * Crankd s only availabl in standard arovd austnitic stainlss stl connctin with cli connctin crankd C doubl crankd uroan standard Rxnord RxPlus Rollr Chain mad of stainlss stl Dulx rollr chain Chain o. Plat dth Transvrs itch Pin lnth Connctin in lnth arin ara vra tnsil strnth Wiht traiht sidd lat oos arts F q Inch mm mm mm mm mm mm mm mm mm cm² k/m C* * 08-2 0.5 12.7 7.75 8.51 4.45 11.30 11.6 13.92 31.0 33.0 1.01 22 200 1.4 x x x x x 10-2 0.625 15.875 9.65 10.16 5.08 13.28 14.6 16.59 35.5 38.6 1.35 31 000 1.8 x x x x x 12-2 0.75 19.05 11.68 12.07 5.72 15.62 15.9 19.46 41.7 44.4 1.79 35 000 2.3 x x x x x x 16-2 1 25.4 17.02 15.88 8.28 25.40 20.8 31.88 67.4 72.8 4.21 81 000 5.3 x x x x x x * Crankd s only availabl in standard arovd austnitic stainlss stl connctin with cli connctin crankd C doubl crankd 32

uroan standard Rxnord RxPlus Rollr Chain mad of stainlss stl Trilx rollr chain Chain o. Plat dth Transvrs itch Pin lnth Connctin in lnth arin ara vra tnsil strnth Wiht traiht sidd lat oos arts F q Inch mm mm mm mm mm mm mm mm mm cm² k/m 08-3 0.50 12.7 7.75 8.51 4.45 11.30 11.6 13.92 44.6 47.2 1.51 32 400 2.1 x x x 10-3 0.625 15.875 9.65 10.16 5.08 13.28 14.6 16.59 52.2 55.6 2.02 46 500 2.6 x x x 12-3 0.75 19.05 11.68 12.07 5.72 15.62 15.9 19.46 61.3 65.2 2.68 52 500 3.4 x x x x 16-3 1.00 25.4 17.02 15.88 8.28 25.40 20.5 31.88 9.3 107.2 6.31 119 000 7.8 x x x x connctin with cli id bow rollr chain Rxnord RxPlus Rollr Chain mad of stainlss stl imlx rollr chain Chain o. Plat dth Pin lnth Radius Minimum tnsil strnth Wiht oos arts Inch mm mm mm mm mm mm mm mm k/m 843 0.50 12.7 7.80 7.92 3.96 11.0 11.6 17.9 1000 11 000 0.7 x x 63 0.75 19.05 12.80 11.91 5.08 17.6 16.8 29.1 356 14 000 1.4 R F q connctin with cli RxPlus 33

Rxnord RxPlusCarbon Rollr Chain xtrm Prformanc Industris rvd: Food & vra utomotiv Matrial Handlin Rxnord RxPlusCarbon maintnanc-fr Rollr Chain contains xcllnt acid- and corrosion-rsistant thrmolastic slidin slvs, that rquir no rlubrication. This chain faturs an xtrm lon war lif and hih war rsistanc. Maintnanc-fr Th hih-tch thrmolastic bushs in th Rxnord RxPlusCarbon Rollr Chain tak ovr th function of lubrication. Thanks to th low friction in th chain, no maintnanc is ndd. You won t xrinc any downtim in your roduction cycl. Maximum hyin Whr strict hyinic conditions or watr is a factor and corrosion-fr matrial is ndd, Rxnord RxPlus Rollr Chain offrs surior rformanc. Dirct food contact is rmittd. This maks it th bst choic for th Food & vra industry. Rust- and acid-rsistant Th Rxnord RxPlus Rollr Chain consists of xtrmly rust- and acid-rsistant matrials. This maks it ossibl to us th chain in watr, stam and arssiv liquids without damain th chain. t th sam tim, du to th hat-tratmnt of th ins, th war lif of this chain is sinificantly lonr than othr corrosion-rsistant chains. stability list is availabl uon rqust. nvironmntally frindly Th chain is nvironmntally frindly sinc thr is no rlubrication ndd. This rsults in a mor fficint and co-frindly way of roducin. xt to this, th chain has a vry hih nry fficincy and is low-nois. Thanks to its nvironmntally frindly rortis, th chain is F H1 crtifid. It's comltly fr of silicon and Tflon. Faturs and bnfits on liftim Rust- and acid-rsistant Otimizd war rortis F H1 crtification Hih-tch RxCarbon slidin slvs cial stl dvantas Rducd downtim, no rlubrication rquird o contamination of convyd oods and surroundins, as no rlubrication is ndd asy clanin Hyinic ow-nois and nvironmntally frindly nry-fficint ubrication Food-rad lubricant Tmratur ran from -40 C to +100 C cial vrsions suitabl for tmraturs u to +175 C (Plas contact Rxnord ninrin) 34

Rxnord RxPlusCarbon Rollr Chain Rollr Corrosion-rsistant, cold-formd rollrs rotct th chain joint aainst shock loads Innr lat Th scial corrosion-rsistant RxPlus matrial of th sid lats incras th fatiu charactristics of th chain Pin Th scial hat-tratd in incrass war rsistanc and roduction utim Outr lat Th scial corrosion-rsistant RxPlus matrial of th sid lats incras th fatiu charactristics of th chain RxCarbon slidin slvs Hih-tch slidin slvs tak ovr th lubrication film function liminatin th nd for rlubrication ush amlss cold-formd bushs rovid surior war lif and lss downtim War rsistanc Maintnanc-fr Continuous hih loadin caacity Dam corrosion rsistanc Multifunctional but scifically suitabl for critical alications Hyinic xcllnt rsistanc to rust and acids co-frindly F H1 crtification o rlubrication rquird Rxnord mts th rquirmnts of Machin Dirctiv 2006/42/C 35 RxPlusCarbon

Rcommndd chain tractiv owr for aroriat sds Chain o. u to 0,5 m/s tmratur ran from - 40 C to + 80 C admissibl tractiv owr for u to 1,0 m/s u to 1,5 m/s u to 2,0 m/s tmratur ran + 80 C to + 100 C admissibl tractiv owr for * u to 0,5 m/s u to 1,0 m/s 08-1 C 850 750 650 500 680 600 10-1 C 1100 1000 900 670 880 800 12-1 C 1500 1300 1100 890 1200 1040 16-1 C 3500 3100 2700 2100 2800 2480 08-2 C 1500 1300 1100 900 1200 1000 10-2 C 1900 1800 1600 1200 1500 1400 12-2 C 2600 2300 1900 1600 2100 1800 16-2 C 6100 5400 4700 3700 4900 4300 * For tmraturs abov +100 C las consult Rxnord ninrin (availabl u to +175 C) 36

uroan standard Rxnord RxPlusCarbon Rollr Chain mad of stainlss stl imlx rollr chain Chain o. Plat dth Transvrs itch Pin lnth Connctin in lnth arin ara vra tnsil strnth Wiht traiht sidd lat oos arts F q Inch mm mm mm mm mm mm mm mm mm cm² k/m 08-1 C 0.50 12.7 7.75 8.51 4.45 11.30 11.6-16.7 19.0 0.50 11 000 0.7 x x x 10-1 C 0.625 15.875 9.65 10.16 5.08 13.28 14.6-18.9 22.0 0.67 13 000 0.9 x x x 12-1 C 0.75 19.05 11.68 12.07 5.72 15.62 15.9-22.3 25.1 0.89 17 500 1.15 x x x x 16-1 C 1.00 25.4 17.02 15.88 8.28 25.40 20.8-35.4 40.8 2.10 44 000 2.6 x x x x connctin with srin connctin uroan standard Rxnord RxPlusCarbon Rollr Chain mad of stainlss stl Dulx rollr chain Chain o. Plat dth Transvrs itch Pin lnth Connctin in lnth arin ara vra tnsil strnth Wiht traiht sidd lat oos arts F q Inch mm mm mm mm mm mm mm mm mm cm² k/m 08-2 C 0.50 12.7 7.75 8.51 4.45 11.30 11.6 13.92 31.0 33.0 1.01 20 400 1.4 x x x 10-2 C 0.625 15.875 9.65 10.16 5.08 13.28 14.6 16.59 35.5 38.6 1.35 26 000 1.8 x x x 12-2 C 0.75 19.05 11.68 12.07 5.72 15.62 15.9 19.46 41.7 44.4 1.79 35 000 2.3 x x x x 16-2 C 1.00 25.4 17.02 15.88 8.28 25.40 20.8 31.88 67.4 72.8 4.21 81 000 5.3 x x x x connctin with srin connctin 37 RxPlusCarbon

Connctin dimnsions for rollr chains, uroan and mrican tys ush ndlat Rquird matrial hardnss of fixin lmnts: at last 490 /mm 2 To incras war rsistanc, fit a bush (surfac hardnss ratin arox. 60 HRc) to th connctin lmnt, if joint mobility is rquird at th connction oint Hardnd bushs ar not rquird in cas of static loadin Plas ordr bushs usin th corrsondin bush art no. Th bush bor diamtrs d C10 rsult from rss-fittin in bor diamtr D 7 If no bushs ar fittd, th bor d C10 is insrtd dirctly into th connction lmnt Connctin dimnsions for rollr chains, uroan ty, IO 606 / DI 8187 Connctin dimnsions for rollr chains, mrican ty, IO 606 / DI 8188 Chain no. Width btwn Plat thicknss or Ø Chain no. Width btwn Plat thicknss Plat dth Transvrs itch s s s 1 2 f f h b 1 2 c d C10 D 7 t o inch mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm 08 0.50 12.70 7.75 11.30 1.70 1.70 1.25 11.60 13.92 10.30 8.40 11 11.20 6.0 4.45 6.27 2.7 7.5 10 0.625 15.875 9.65 13.28 1.70 1.50 1.50 14.60 16.59 11.30 9.40 13 13.20 7.5 5.08 7.00 3.2 8.0 12 0.75 19.05 11.68 15.62 1.80 1.80 1.80 15.90 19.46 13.20 11.10 16 15.60 10.0 5.72 8.75 3.8 9.5 16 1.00 25.40 17.02 25.40 3.75 3.05 3.05 20.50 31.88 21.60 17.70 20 25.40 14.0 8.28 11.70 6.4 13.0 20 1.25 31.75 19.56 29.00 4.50 4.50 3.50 25.70 36.45 24.10 20.20 26 29.00 16.5 10.19 14.00 7.4 16.5 24 1.50 38.10 25.40 37.90 6.00 5.00 5.00 33.00 48.36 31.60 26.90 33 37.90 19.5 14.63 18.99 10.6 20.0 28 1.75 44.45 30.99 46.50 6.50 5.50 6.00 37.00 59.56 36.60 31.60 36 46.50 23.0 15.90 21.64 12.6 24.0 32 2.00 50.80 30.99 45.50 6.30 6.30 6.30 41.20 58.55 38.40 32.50 42 45.50 27.0 17.81 23.12 13.2 27.0 40 2.50 63.50 38.10 55.70 8.50 8.00 8.00 51.50 72.29 47.50 39.40 52 55.70 35.0 22.89 29.18 16.6 35.0 48 3.00 76.20 45.72 70.50 12.00 10.00 10.00 63.50 91.21 56.00 49.20 64 70.50 40.0 29.24 37.90 20.6 40.0 56 3.50 88.90 53.34 81.30 13.60 12.00 12.00 77.00 106.60 64.80 57.80 77 81.30 45.0 34.32 43.50 25.0 51.0 or Ø min max s s 1 max f 1 f 2 h b max c d C10 D 7 t o inch mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm 40 0.50 12.70 7.85 11.15 1.50 1.50 11.60 14.38 11.2 8.1 11 11.10 6.0 3.96 5.98 3.2 7.0 50 0.625 15.875 9.40 13.80 2.00 2.00 14.60 18.11 12.0 10.2 13 13.80 7.7 5.08 7.65 4.2 9.0 50 0.75 19.05 12.57 17.70 2.40 2.40 17.60 22.78 14.4 12.8 16 17.60 9.0 5.94 9.00 5.0 10.0 80 1.00 25.40 15.75 22.50 3.05 3.05 23.50 29.29 20.4 16.5 22 22.30 12.0 7.92 11.67 6.8 14.0 100 1.25 31.75 18.90 27.40 4.00 4.00 28.70 35.76 23.7 19.7 26 27.40 15.5 9.53 13.82 8.4 17.5 120 1.50 38.10 25.22 35.30 4.70 4.70 34.40 45.44 30.0 24.9 30 35.20 18.5 11.10 16.13 9.8 20.0 140 1.75 44.45 25.22 37.00 5.50 5.50 40.80 48.87 31.6 26.7 36 37.00 21.5 12.70 18.29 11.6 23.5 160 2.00 50.80 31.55 45.00 6.30 6.30 47.80 58.55 36.4 31.8 42 44.70 24.0 14.27 20.70 13.2 27.5 180 2.25 57.15 35.48 50.50 7.00 7.00 54.00 65.35 41.4 35.7 47 50.60 27.0 17.46 25.35 14.6 32.0 200 2.50 63.50 37.85 54.70 8.00 8.00 60.00 71.55 45.0 39.0 52 54.60 30.0 19.84 28.38 16.6 34.5 240 3.00 76.20 47.35 67.50 9.50 9.50 70.00 87.33 55.5 47.4 62 67.50 37.0 23.80 34.28 19.6 41.0 38

Ovrviw of Rxnord Rollr Chain Offrin xtrm Prformanc Rollr Chain Chain tatic loadin Dynamic loadin Chain hin War rsistanc cid corrosion rsistanc Dam corrosion rsistanc x-works co-frindly ubrication* ttachmnts RxPlus Rollr Chain VK016 Food-rad lubricant** Rxthltic Rollr Chain VK006 on-trm lubricant RxHiPro Rollr Chain VK001 Pr-lubrication Corrosion rotction RxCarbon Rollr Chain VK016 Food-rad lubricant** RxPlus Carbon Rollr Chain VK016 Food-rad lubricant** RxProX Rollr Chain VK001 lubricant RxHiPro thltic Rollr Chain VK018 Food-rad lubricatin wax** RXtrm Rollr Chain VK015 Hihtmratur lubricant * cial or othr lubrication tys on rqust ** F H1 Crtification Hih Prformanc Rollr Chain Chain tatic loadin Dynamic loadin Chain hin War rsistanc cid corrosion rsistanc Dam corrosion rsistanc RxPro Rollr Chain x-works co-frindly ubrication* ttachmnts VK001 lubricant rovd Prformanc Rollr Chain Chain tatic loadin Dynamic loadin Chain hin War rsistanc cid corrosion rsistanc Dam corrosion rsistanc ink-lt Rollr Chain x-works co-frindly ubrication ttachmnts RCH conform lubricant oadin caacity Dam corrosion rsistanc War rsistanc co-frindly cid corrosion rsistanc 39