Model C223J53A Ultra Low Profile 85 3 db, 9 Hybrid Coupler Description The C223J53A is a low cost, low profile sub-miniature high performance 3 db coupler in an easy to use surface mount package. It is designed for WiMax,WiBro, UMTS, and IMT applications. The C223J53A is ideal for balanced power and low noise amplifiers, plus signal distribution and other applications where low insertion loss and tight amplitude and phase balance are required. The C223J53A is available on tape and reel for pick and place high volume manufacturing. All of the Xinger components are constructed from ceramic filled PTFE composites which possess excellent electrical and mechanical stability having X and Y thermal coefficient of expansion (CTE) of 17 ppm/ C Detailed Electrical Specifications: Specifications subject to change without notice. Features: 23 MHz.7mm Height Profile WiMax, WiBro, UMTS & IMT applications Low Insertion Loss High Isolation Surface Mountable Tape & Reel Non-conductive Surface RoHS Compliant ROOM (25 C) Parameter Min. Typ. Max Unit Frequency 23 MHz Port Impedance 5 Ω Return Loss 18 22 db Isolation 21 25 db Insertion Loss*.3.4 db Amplitude Balance.1.8 db Phase Balance (relative to 9 ) 2 6 Degrees Power Handling 4 Watts Operating Temperature -55 +85 ºC * Insertion Loss stated at room temperature (Insertion Loss is approximately.1 db higher at +85 ºC) Outline Drawing Top View (Near-side) Side View Bottom View (Far-side).79±.4 [2.±.1].27±.2 [.68±.5] 1 2 3 4X.26 [.65].49±.4 [1.25±.1].39 [.98] 6X.9 [.22] Orientation Marker Denotes Pin Location Dimensions are in Inches [Millimeters] Mechanical Outline Pin 1 2 3 4 5 6 Designation Input GND Isolated Direct GND Coupled Orientation Marker Denotes Pin Location 6 5 4 6X.12 [.3] Tolerances are Non-Cumulative Available on Tape and Reel for Pick and Place Manufacturing. (315) 432-899 (8) 411596
Model C223J53A Typical Broadband Performance: 5 MHz. to 6 MHz. Return Loss - Input Insertion Loss 3 6. -.3 -.6 -.9-1.2-1.5-1.8-2.1-2.4-2.7..3.6 5 1 15 25 3 35 4 45 5 55 6 5 1 15 25 3 35 4 45 5 55 6 Amplitude Balance Phase Balance 2 2 1.5 15 1 1.5 5 deg -.5-5 -1-1 -1.5-2 -2 5 1 15 25 3 35 4 45 5 55 6 5 1 15 25 3 35 4 45 5 55 6 Isolation 3 6 5 1 15 25 3 35 4 45 5 55 6 (315) 432-899 (8) 411596 Available on Tape and Reel for Pick and Place Manufacturing.
Model C223J53A Typical Performance: 19 MHz. to 24 MHz. 3 6 Return Loss - Input. -.3 -.6 -.9-1.2-1.5-1.8-2.1-2.4-2.7..3.6 Insertion Loss 19 21 22 23 24 19 21 22 23 24 2 Amplitude Balance 2 Phase Balance 1.5 15 1 1.5 5 deg -.5-5 -1-1 -1.5-2 -2 19 21 22 23 24 19 21 22 23 24 Isolation 3 6 19 21 22 23 24 Available on Tape and Reel for Pick and Place Manufacturing. (315) 432-899 (8) 411596
Model C223J53A Mounting Configuration: In order for Xinger surface mount components to work optimally, the proper impedance transmission lines must be used to connect to the RF ports. If this condition is not satisfied, insertion loss, Isolation and VSWR may not meet published specifications. All of the Xinger components are constructed from ceramic filled PTFE composites which possess excellent electrical and mechanical stability having X and Y thermal coefficient of expansion (CTE) of 17 ppm/ o C. An example of the PCB footprint used in the testing of these parts is shown below. In specific designs, the transmission line widths need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying pick and place equipment tolerances. 6X.14 [.35] 4X.12 [.3] 6X.13 [.33].26 [.66] 6X.2 [.5] 4X Transmission Line Plated thru holes to ground Circuit Pattern Footprint Pad (s) Solder Resist Dimensions are in Inches [Millimeters] Mounting Footprint (315) 432-899 (8) 411596 Available on Tape and Reel for Pick and Place Manufacturing.
Model C223J53A Packaging and Ordering Information Parts are available in reel and are packaged per EIA 481-2. Parts are oriented in tape and reel as shown below. Minimum order quantities are 4 per reel. See Model Numbers below for further ordering information. ØA ØC ØD QUANTITY/REEL 4 TABLE 1 REEL DIMENSIONS (inches [mm]) ØA B ØC ØD 7. [177.8].32 [8.] 2. [5.8].512 [13.] B Available on Tape and Reel for Pick and Place Manufacturing. (315) 432-899 (8) 411596
Model C223J53A (315) 432-899 (8) 411596 Available on Tape and Reel for Pick and Place Manufacturing.