H Core Retrieval System Global Drilling Products Pte Ltd 9 Loyang Way, #0-0, Changi Logistics Centre Singapore 0 Telephone: + 9 info@globaldrillingproducts.com www.globaldrillingproducts.com
Core Barrel Assembly, H Item -0-0 Qty. - - Core Barrel Assembly, H Part No. 09 Core Barrel Assembly, 0ft (.0m) 00 Core Barrel Assembly, ft (.m) -0-0 - - 0 0 Inner Tube Assembly, 0ft (.0m) Inner Tube Assembly, ft (.m) A B - - 000 00 00 00 0090 00 Locking Coupling, Conventional, Tang Adaptor Coupling Landing Ring Outer Tube, 0ft (.0m) Outer Tube, ft (.m) Inner Tube Stabilizer A B 9 0 - - 00 00 009 00 009 000 Head Assembly Inner Tube, 0ft (.0m) Inner Tube, ft (.m) Stop Ring Core Lifter, Slotted Core Lifter Case Note: Please refer to the H Core Barrel Options and Kits page for alternatives to the standard H Core Barrel components. A B A B 9 0
Core Barrel Options and Kits, H Item Part No. 00 000 00 00 00 0 0 00 9 00 0 00 00 000 0 00 00 Core Barrel Options and Kits, H Locking Coupling, Conventional, No Tang Locking Coupling, Full-Hole, Tang Locking Coupling, Full-Hole, No Tang Landing Indicator Bushing, No OD Groove Shut-Off Valve, Soft Solid Spindle Spacer Inner Tube Cap Assembly, With Thread Protector Inner Tube Coupling Inner Tube Extension, Extended Shell Core Lifter, Fluted Core Lifter, Slotted, Diamond Coated Core Lifter, Fluted, Diamond Coated Core Lifter, Smooth Graphite Core Barrel Plug Gauge Assembly, Bit & Shell (not shown) 9 0
Head Assembly, H 00 Head Assembly, H Item Qty Part No. 00 Spearhead Point 00 Spearhead Spring 00 Detent Plunger 00 Spearhead Pin 009 Spearhead Base 00 Latch Retracting Pin 09 Latch Retracting Case 09 Latch Body, Upper 9 00 Latch Pivot Pin 0 000 Latch Spring 009 Latch 009 Landing Shoulder 00 Stainless Steel Ball 00 Landing Indicator Bushing, OD Groove 009 Latch Body, Lower 00 Nord-Lock Washer 00 Hex Nut 0099 Spindle 9 00 Shut-Off Valve, Hard 0 00 Shut-Off Washer 009 Spindle Bearing, Upper 0000 Spindle Bushing 00 Spindle Bearing, Lower 009 Compression Spring 009 Self Locking Nut 000 Inner Tube Cap Assembly, No Thd. Protector 000 Thread Protector, Inner Tube Cap Note: Please refer to the H Core Barrel Options and Kits page for alternatives to the standard H Head Assembly components. 9 0 9 0
Inner Tube Cap Assembly, H 000 Inner Tube Cap Assembly, H Item Qty Part No. 000 Inner Tube Cap Body 00 Grease Fitting 00 Stainless Steel Ball 00 Check Valve Body
Inner Tube Cap Assembly, H With Thread Protector 0 Inner Tube Cap Assembly, H With Thread Protector Item Qty Part No. 000 Inner Tube Cap Body 00 Grease Fitting 00 Stainless Steel Ball 00 Check Valve Body 000 Thread Protector, Inner Tube Cap
Conversion Kit, Link-Latch H to Edge Latch H 0 Conversion Kit, Link-Latch H to Edge Latch H Item Qty. Part No. 009 Edge Latch 000 Latch Spring 00 Latch Retracting Pin 00 Latch Pivot Pin 00 Drift Pin Tool, Latch Retracting Pin 00 Drift Pin Tool, Latch Pivot Pin 0 Conversion Instructions (Not Shown) 0 Parts Pouch (Not Shown)
Item Fluid Retention Kit, NHP 000 NHP Fluid Retention Kit Qty. Part No. 00 Stainless Steel Ball 00 Fluid Retention Bushing, Standard 0 Fluid Retention Bushing, Heavy Mud 000 Compression Spring, Light (Green) 0009 Compression Spring, Medium (Blue) 000 Compression Spring, Heavy (Red) Note: Heavy mud fluid retention bushing (0) has a small groove machined into the OD of the part. A Parts Pouch is available separately (0).
Conversion Head Assembly, H 009 Conversion Head Assembly, H Item Qty Part No. 00 Spearhead Point 00 Spearhead Spring 00 Detent Plunger 00 Spearhead Pin 009 Spearhead Base 00 Latch Retracting Pin 09 Latch Retracting Case 09 Latch Body, Upper 9 00 Latch Pivot Pin 0 000 Latch Spring 009 Latch 009 Landing Shoulder 00 Stainless Steel Ball 00 Landing Indicator Bushing, OD Groove 009 Latch Body, Lower 00 Nord-Lock Washer Notes: Conversion Head Assembly, H (009) may be used to convert Spring Latch, H to Edge Latch, H system and save the cost of the Spindle Assembly. See Link Latch H to Edge Latch H Conversion Kit (0) for additional savings. 9 0
Overshot Assembly, H 00 Overshot Assembly, H Item Qty. Part No. 00 Cable Swivel Eye Bolt 009 Cable Swivel Collar 000 Thrust Bearing 00 Castle Nut 00 Cotter Pin 00 Grease Fitting 00 Cable Swivel Body 00 Jar Staff 9 00 Jar Tube 0 00 Locking Sleeve, Slotted 00 Hex Nut 00 Nord-Lock Washer 000 Overshot Head Assembly 009 Loading Fork Tool 0090 Loading Funnel 9 0
Overshot Head Assembly, H 000 Overshot Head Assembly, H Item Qty. Part No. 00 Overshot Head Body 00 Self Locking Set Screw 009 Compression Spring 000 Lifting Dog 00 Pivot Pin 00 Sway Pin 00 Pin Link 009 Self Locking Cap Screw
Overshot Assembly, Rolling, H 00 Overshot Assembly, Rolling, H Item Qty. Part No. 00 Cable Swivel Eye Bolt 009 Cable Swivel Collar 000 Thrust Bearing 00 Castle Nut 00 Cotter Pin 00 Grease Fitting 009 Roller Wheel 00 Spring Pin 9 00 Cable Swivel Roller Body 0 00 Jar Staff 00 Jar Tube 00 Hex Nut 00 Nord-Lock Washer 00 Lower Roller Body 000 Overshot Head Assembly 009 Loading Fork Tool 0090 Loading Funnel 9 0
Water Swivel Assembly, Compact Plus 0 Water Swivel Assembly, Compact Plus Item Qty. Part No. 0 Swivel Cap 0 Wavy Washer 0 O-Ring, Upper 0 Swivel Packing Set 0 Wear Sleeve, Slotted 0 Packing Cage 09 Ball Bearing 00 Swivel Body, Upper 9 0 O-Ring, Lower 0 0 Spindle 0 Thrust Bearing 0 Swivel Body, Lower 00 Grease Fitting 0 Felt Seal Notes: # NPT Hose Connection on Swivel Cap (). AW Rod Box Connection on Spindle (0). Can also be used with drilling muds. Field serviceable. 9 0
Spares Kit, Water Swivel, Compact Plus 09 Spares Kit, Water Swivel, Compact Plus Item Qty. Part No. 0 Wavy Washer 0 O-Ring, Upper 0 Swivel Packing Set 0 Wear Sleeve, Slotted 09 Ball Bearing 0 O-Ring, Lower 0 Thrust Bearing 0 Felt Seal
Gauge Assembly, Bit and Shell, H 00 Gauge Assembly, Bit and Shell, H Item Qty Part No. 00 Gauge - Max. New Shell 0 Gauge - Min. New Shell 0 Gauge - Max. New Bit / Worn Shell 0 Gauge - Min. New Bit 0 Hex Bolt 09 Flat Washer 00 Lock Nut Note:. This gauge assembly is used to verify H, H, and HTW Bit and Shell OD.
Gauge Assembly, Rod O.D., H 00 Gauge Assembly, Rod O.D., H Item Qty Part No. 00 Gauge, Rod OD, New 00 Gauge, Rod OD, Wear 00 Self Locking Nut 00 Flat Washer 00 Hex Bolt - 009 Wear Sample, OD Note: Item # is not part of 00 Gauge Assembly.
Wrench Assembly, H Inner Tube 0 Wrench Assembly, H Inner Tube Item Qty. Part No. 0 Wrench Handle 0 Stationary Jaw 0 Swing Jaw 0 Pin 09 Retaining Ring Note: This wrench assembly can also be used with N Outer Tube components.