Product Data Sheet Rev. 1.0 2017.09.07 1# LED Driver Outdoor 200 W 2 Channel SL-L2701B0N1KR High Efficiency Constant Current LED Driver With Active Power Factor Correction Features & Benefits Output Current: 700 ma Fixed Output Voltage Range: 100 ~ 130 Vdc(Typ. 120 Vdc) Output Power: Max 192 W Dimming Control: Non-Dimming Input Voltage: 120~277 Vac, 50/60 Hz Safety: KS C 7655, K 61347-1, K 61347-2-13, K 62384 EMI: KS C CISPR 15, KS C IEC 61547, KN 15, KN 61547 Protections: Short Circuit, Over Voltage, No Load ta Range: -40 ~ +50 C Expected Lifetime: 50,000 hours at tc 74 C Environmental Compliance: RoHS Long lasting & High reliability 2 Channel Output Flickerless Applications LED Street/Tunnel Lighting and Outdoor LED Lighting
2 Table of Contents 1. Characteristics ----------------------- 3 2. Safety standards ----------------------- 4 3. Typical Characteristics Graphs ----------------------- 5 4. Reliability ----------------------- 6 5. Outline Drawing & Dimension ----------------------- 7 6. Label Structure ----------------------- 8 7. Packing Structure ----------------------- 8 8. Precautions in Handling & Use ----------------------- 8
3 1. Characteristics Article Symbol Specification Min. Typ. Max. Unit Note INPUT SPECIFICATIONS Nominal Input Voltage Vin 120 220 277 Vac Input Voltage Range 108 300 Vac Nominal Frequency fin 50 / 60 Hz Frequency Range 47 63 Hz Input Current Iin 0.85 2 A Input Power Pin 182 220 W Total Harmonic Distortion THD 6 10 % At 220Vac Power Factor PF 0.95 0.97 - At 220Vac Efficiency η 91 93 % At 220Vac In-rush Current 100 A 25 Cold start, Duration 1ms OUTPUT SPECIFICATIONS Output Channel CH 2 2-channel output Nominal Output Voltage Vo 100 120 130 Vdc Max. Voltage 153 Vdc Open circuit, No-load protection Output Current Io 700 ma ±5%Io, Fixed current output Output Ripple Current Iripple 70 ma Measured by 20 MHz bandwidth oscilloscope & output in parallel with 0.1 μf ceramic cap. and 10 μf e-cap. Peak Current Ipk 1400 ma Output Power Po 168 192 W Turn-on Delay Time Td 0.1 0.5 s DIMMING SPECIFICATIONS Dimming Control N/A Vdc Dimming Range N/A %Io
4 Article Symbol Specification Min. Typ. Max. Unit Note ENVIRONMENTAL SPECIFICATIONS Ambient Temperature t a -40 25 50 ºC Case Temperature t c 88 ºC Measured at t c point as indicated on the product label Storage Temperature t s -40 25 80 ºC Cool down before operating Relative Humidity 20 85 % IP Rating 67 - Suitable for outdoor environment Expected Lifetime (e-cap) 50,000 hrs At t c 74 ºC, full load MTBF 520,000 hrs At t a = 25 ºC, full load 200,000 hrs At t a = 50 ºC, full load Dimensions L x W x H 10.16 x 2.68 x 1.33 inch 258 x 68 x 33.9 mm Net Weight 850 g ±30g 2. Safety Standards Safety standard KS C 7655, K 61347-1, K 61347-2-13, K 62384 Description Safety Standards KS C CISPR 15, KS C IEC 61547, KN 15, KN 61547 EMC Standards
Power Factor Total Harmonic Distortino(%) Efficiency(%) 5 3. Typical Characteristics Graphs a) Operating Window b) Efficiency vs. Load Iout[A] 94.5% 94.0% 700mA 93.5% 93.0% 92.5% 92.0% 91.5% 91.0% 120Vac 90.5% 220Vac 0 100V 120V 130V 153V Vout[V] 90.0% 277Vac 100V 120V 130V Load c) PF vs. Load d) THD vs. Load 1.000 9.0% 0.980 0.960 8.0% 7.0% 6.0% 0.940 0.920 5.0% 4.0% 3.0% 0.900 0.880 120Vac 220Vac 277Vac 100V 120V 130V Load 2.0% 1.0% 0.0% 120Vac 220Vac 277Vac 100V 120V 130V Load
6 4. Reliability Test Items and Conditions Test Item Specification Condition Leakage Current < 0.5 ma Earth Continuity < 0.1 Ω Hi-Pot Input Output Input Case 3750 Vac, 60 s, cut-off current 10 ma 3750 Vac, 60 s, cut-off current 10 ma Input Output 500 Vdc, 60 s, insulation resistance 10 MΩ Insulation Resistance Input Case 500 Vdc, 60 s, insulation resistance 10 MΩ Output Case 500 Vdc, 60 s, insulation resistance 10 MΩ Surge L / N LN / FG ±6 kv ±8 kv ESD Contact Air ±6 kv ±10 kv 150 pf / 300 Ω
7 5. Outline Drawing & Dimension a) Dimension (mm) LED Connector : KET MG610331 b) Wiring N E L Live F.G. Neutral LED Driver CH1 LED- CH1 LED+ CH2 LED- CH2 LED+ LED Module 1 LED Module 2 Name Feature Color Purpose CH1 LED- Channel 1, Negative output Blue Power ground 1 CH1 LED+ Channel 1, Positive output Red Supply power to LED module 1 CH2 LED- Channel 2, Negative output White Power ground 2 CH2 LED+ Channel 2, Positive output Brown Supply power to LED module 2
8 6. Label Structure 7. Packing Structure Packing material Max. quantity (pcs) Dimension (mm) Length Width Height Outer Box 10 440 315 118 Pallet 480 1130 1130 117 8. Precautions in Handling & Use 1) To prevent the LED Driver from any defect, please handle and store it with care Do not drop or give shock Do not store in very humid location or at extreme temperature Do not open or disassemble the product 2) Static electricity or surge voltage may damage the components inside LED Driver, as such please observe proper antielectrostatic working process People handing the Driver should be well grounded (e.g. using ESD wrist band) and wear anti-static working clothes and gloves All related devices and instruments in the production line should be well grounded (e.g. working table, measuring equipment, assembly jigs) 3) Observe the correct polarity of output terminal 4) Avoid input voltage exceeds the maximum rating, which will cause damage to the circuit and result in malfunction
Legal and additional information. About Samsung Electronics Co., Ltd. Samsung Electronics Co., Ltd inspires the world and shapes the future with transformative ideas and technologies. The company is redefining the worlds of TVs, smartphones, wearable devices, tablets, digital appliances, network systems, and semiconductor and LED solutions. For the latest news, please visit the Samsung Newsroom at http://news.samsung.com. Copyright 2017 Samsung Electronics Co., Ltd. All rights reserved. Samsung Electronics reserves the right to modify, at its sole discretion, the design, packaging, specifications and features shown herein without notice at any time. Samsung Electronics Co., Ltd. Samsung-ro, Giheung-gu Yongin-si, Gyeonggi-do, 17113 KOREA www.samsungled.com