, INC. 100 S Kentucky Ave, EVANSVILLE IN 47714 PH: 812-425-4439 FX: 812-425-7676 SPECIFICATIONS FOR: ATTN: JIM PATTON 2331 BUCHANAN ROAD EVANSVILLE, IN 47720-5408 PHONE: 812-425-4439 FAX: 812-425-7676 ALUMINUM, ELLIPTICAL, DOUBLE TAPERED, BAFFLED, LOW PROFILE D.O.T. 406 TRAILER ATB6 BARREL DESCRIPTION: CODE: CAPACITY: CONSTRUCTION: D.O.T. 406 - AL. 9300 Gallons (up to +3% tolerance 60 gallons minimum) Aluminum elliptical, double tapered, baffled..204 bottom,.176 sides and top. Polished finish shell and heads. COMPARTMENTATION: Four (4) 3100//1300//1800//3100. All double bulkheads between compartments. BAFFLES AND HEADS OPERATING TEMPERATURE: PRODUCTS: Dished and flanged,.250 and.190 before forming. Inserted, fillet welded into shell. Baffle drains at 3 and 9 o'clock. 125 degrees F. maximum Petroleum. PRODUCT WEIGHT: 7.2# FRAME: OPERATING PRESSURE: 3.3 PSI. Extruded aluminum full frame. Aluminum outriggers and crossmembers at running gear, supports, and fifth wheel.
PAGE 2 UPPER FIFTH WHEEL: 5/16" Heavy-duty upper fifth wheel plate adjustable in 2" increments with A.A.R. style double hubbed king pin. Kingpin plate painted gray. Aluminum kicker plate included. FLASHING: Overturn Protection - Full length structural aluminum extrusion each side on top, curbside rail doubles as vapor rail. MANHOLE AND GASKET: CAPACITY INDICATORS: STATIC CABLE: DOCUMENT HOLDER: CALIBRATION PAPER CHART: SUPPORTS FRAME: LANDING GEAR: Betts PPV L816BXB, "Smart Vent," vapor recovery type 16" diameter zinc plated steel cover with 10" aluminum offset fill and Buna N gaskets. Cover assembly includes normal vent (6496ALB). One (1) per compartment. None. One per compartment, 1/8 stainless steel static cable. Betts PS-1 near landing gear frame, roadside. Paper theoretical, in ¼ increments based on innage. Welded aluminum construction. AUSTIN, "Lift-pak" round leg 2-speed, steel, sand shoes, 50,000 lb. lift capacity, roadside crank handle. UNDERCARRIAGE: SUSPENSION: SUBFRAME: Hendrickson Intraax AAT23K airride tandem suspension with single valve level control. Aluminum subframe bolted to extruded aluminum upper frame. AXLES: Hendrickson model HP, 5" round x ½ thick wall, 71 ½ track. 23,000 lb. rating, axles are integral with suspension. OIL SEALS: Stemco BRAKES: Hendrickson, s-cam, 16 ½ x 7".
PAGE 3 - Anti-Lock... MERITOR WABCO "Easy Stop" Model 4200 (4S/2M) Anti-lock Braking System. - Brake Chambers..... TSE 3030 with stroke alert. - Brake Drums.... Motorwheel 16 ½ x 7 centrifuse, outboard mount - Hubs...... Aluminum hub, hub piloted with single flange nut mounting. Hubs filled with CD50 synthetic transmission fluid. - Brake Lining..... ABEX ABB-3030-197. - Slack Adjusters.... Meritor Automatic - Valves..... Sealco - Gladhands...... Philips Quick Release on service line BUMPER: AIR SYSTEM: Aluminum welded enclosed to D.O.T. specifications. To D.O.T. specifications. Multiple tank system. All tanks aluminum construction. WHEELS AND TIRES: WHEELS: TIRES: TIRE CARRIER: FENDERS: MUDFLAPS: 22.5 x 8.25 Alcoa aluminum disc wheels with polished finish on outside, steel disc wheels painted white on inside (four aluminum, four steel wheels). 11R 22.5 Goodyear G314 radials. None. Front and rear - aluminum contour fenders with aluminum fender supports front and rear and stainless steel mounting hardware. Roadside only. White plastic, anti-sail and anti-spray type, with "Polar" logo, front and rear. LIGHTS AND WIRING: LIGHTS: WIRING: 12-volt, Truck Lite Super 44 L.E.D. light system. Flange mounted with stainless steel security rings. D.O.T. lights and reflectors. Combination center marker/turn signals. Sequential L.E.D. turn arrows, one (1) each side mounted on brackets at a 45 degree angle at approximate rear of front fenders. Molded main lead. 7-way plug, mounted on lower roadside of front head.
PAGE 4 REAR LIGHTS: SPOT LIGHTS: WALKWAY: LADDER: HOSE CARRIERS: DIP STICK TUBE: VAPOR RECOVERY: VAPOR RECOVERY VENTS: PRESSURE VENTS: SPLASH DEFLECTORS: OVERFILL PROTECTION: GROUNDING BOLT: Enclosed in stainless steel light boxes. One (1) Betts 305 swivel spot light with clear lens 20 AMP toggle switch, explosion proof. Non-skid paint between the overturn rails. Aluminum, located at front with drain through rails at rear, through barrel. Two grabhandles at the top. Top step is 7" grip strut. One (1) 4 x 22 x full length hose tray with reduced center section floor sloped at openings for permanent vapor hoses. One (1) 2 x 20 aluminum drip stick tube holder with pin at front, drain hole at rear. To be mounted above hose tray on outriggers towards rear of tank. 4 Aluminum Sch 40 internal vapor line located near a head or baffle with shear section outboard of shell. Vapor hook-up locations and sizes. One (1) 4 at rear of trailer curbside above light box. One (1) 4 rear of curbside discharge valves. Two (2) 3 vapor connections recessed and angled for permanent vapor hoses on curbside. To be installed front and rear of discharge valves midway between discharge valve centerline and hose tray. Permanent vapor hoses to lay in tray without kinking or sticking out past tray. Adapters and caps on all outlets. 3 Civacon #1986 SV air operated sequential vents, one (1) per compartment. Aluminum body with Viton seals. Cast aluminum vapor hoods connected to curbside vapor rail utilizing 3 rubber hose. Includes auxiliary tank to operate vents. None. Aluminum splash deflector over each emergency valve. Civacon Rom II Overfill System with top optic sensors only with one (1) 4400 and (1) 4100 receptacles. Monitor to be mounted with receptacles on bracket on front of large cabinet. One (1) Scully 08560 grounding bolt mounted on frame rail near monitor.
PAGE 5 VALVING AND PIPING: EMERGENCY VALVE: PIPING: OUTLET VALVING: SIGHT GLASSES: Betts 4 EV46455ALTA high flow air operated emergency valves with Viton seals and victaulic ends. Air operator controls located in large cabinet between vertical partitions off of cabinet ceiling. Emergency closure located at front head curbside. 4 ½ O.D. aluminum lines with large radius formed elbows, with flanged ends on curbside. All flanged connections to use Viton gaskets. Four (4), one per compartment, Civacon 861, 4 API openable adapters. Four (4), one per discharge line, Regal annealed acrylic sight glass 4 x 1 ¾ thick located behind API heads. BOTTOM LOAD GRAVITY DROPS AND DUST CAPS: PRODUCT INDICATORS: LABEL/DECALS: BRAKE BAR INTERLOCK: BRAKE INTERLOCK VALVE: PLACARDS: CABINET: Four (4) Civacon 4 #871-A-0074 gravity drop adapters, one per compartment. Four (4), four sided rotary product indicators on flanges above outlets. Customer supply label information. One (1) super premium unleaded, (1) kerosene, (1) regular unleaded and (1) premium unleaded. One (1) stainless steel locking brake bar interlock on curbside discharge valves. Separate brake interlock valves (Civacon #100-0001) on extreme rear vapor hook up. 4 Vapor line at rear of discharge valves curbside. Two (2) vapor lines to have interlocks. Permanent vapor lines on curbside will not have interlocks installed. Four (4) aluminum slip in style holder mounted on aluminum brackets. One (1) 48 W x 28 H x 26 ½ D aluminum two door cabinet without center post with stainless hinges. Include two (2) spring style door stays. Cabinet to be equipped with compartments per customer specs, to have bottoms lined with rubber sheets.
PAGE 6 CONSPICUITY TAPE: PAINT: Discontinuous 3M Tape per N.H.T.S.A. requirements. Imron 5000 series gray on all carbon steel parts. This quotation is good for 30 days. SPECIFICATIONS ARE SUBJECT TO CHANGE.