ARIN 600 ERIE Rack & Panel Rectangular onnectors elector Guide
ARIN 600 eries Overview Typical applications ockpit Display Units Mario Beauregard / Fotolia ourtesy of NORD-MIRO Picture All Rights Reserved Picture All Rights Reserved Landing Gear Management abin: IFE & Air onditioning Avionic Bay/Data Acquisition Engine Management Icholakov / Fotolia Alexandr Mitiuc / Fotolia We onnect THE HEART of your ystem Avionic Bay ockpit 2
ARIN 600 eries Overview Features & Benefits TIME AVING Rackable olution Blind mate, learance device for better rackability. Low insertion force. MAKE IT YOUR Modular olution Front and rear release removable contacts. Flex circuit integration and cabling. Build your own connector matching your exact needs. WEIGHT & PAE AVING High Density olution Up to 800 #22 signal contacts. Up to 56 #8 quadrax contacts. OT AVING onfigurable olution ost effective option with no removable contacts. Grounding finger and blade with alodine plating. Possibility to have specific population of contacts. 3
ARIN 600 eries Technical Features & hell onfiguration Technical features Materials hells Insulator eal & grommet Material Aluminum alloy Epoxy resin thermoset Thermoplastic Fluorined silicon Endurance: 500 matings Insertion and extraction forces max:. hell size 1: 120N (27 lbs). hell size 2: 267N (60 lbs). hell size 3: 467N (105 lbs) Plating Alodine 1200 passivation Nickel plating ontacts opper alloy Gold plated Electrical Dielectric withstanding voltage:. ea level: 1 500 Vrms. 15 000 m: 500 Vrms Voltage rating: 500 Vac Max Insulation resistance: 5000 MΩ urrent ratings, continuous: ontact 22 20 Wire gauge 22 24 26 20 22 24 urrent (A) 5 3 2 7.5 3 5 * measured over a conductor length of 150 mm Voltage drop max (mv)* 40 30 25 55 40 30 16 16 13 50 12 12 23 45 Optical ARIN 600 connector can integrate ELIO fiber optic contacts in #8 quadrax cavities with the addition of ELIO #8 adaptor Environmental Temperature rating: -65 to +125 Fluid resistance:. Hydraulic to MIL-H 5606. Lubricating to MIL-L 23699. Isopropyl alcohol Resistance to salt spray: 48 hours (MIL-TD-202 method 101) For more information and details, please consult ''ARIN 600 eries'' catalog on www.souriau.com hell types & avity overview hell size 1 hell size 2 hell size 3 avity position A B Plug avity position A B Plug avity position D A E B F Plug Receptacle Receptacle Receptacle ealing level ompound Allows to seal the insert O-Ring for plug only Fluorined silicon compliant to MIL-R-25988 Grommet Fluorined silicon compliant to MIL-R-25988 4
ARIN 600 eries Technical Features & hell onfiguration Plating & Grounding Alodine plating Nickel plating tandard polarization or Ground finger or Ground blade tandard polarization Without specific grounding ost effective solution ost effective solution Ground spring mandatory on the plug Mounting style tandard mounting Float mounting with eyelet or threaded inserts elf-locking threaded inserts ontacts release Equipment receptacle Rack plug Only receptacles are used with P board with P tail contacts or mix P tail and crimped contacs Possibility to mix rear & front release inserts within the same receptacle Front Release: P Tail contacts Rear Release: rimped contacts & ELIO fiber optic contacts Rear Release: rimped contacts & ELIO fiber optic contacts 5
ARIN 600 eries Insert Layouts & ontact Types Insert Layouts ontact types: hell size 1 P T Q ignal Power oax Triax Quadrax or Twinax ELIO Fiber Optic E avity A & B avity 60 pts 60 #22 Dummy Insert 5W2 2 #16 1 #12 2 #5 Dummy Insert P hell size 2 & 3 avity A, B, D & E 150 pts 126 pts 121 pts 118Q2 71 pts 150 #22 120 #22 6 #16 110 #22 6 #20 5 #16 118 #22 70 #22 1 #1 P P Q E 71 pts rev. 60 pts 47T2 28 pts 24 pts 70 #22 1 #1 60 #20 47 #20 10 #22 10 #16 8 #8 24 #12 P P T P T P 12T6 Q11 Q11 mixte Q10 TA 12 #12 6 #8 11 #8 11 #8 10 #8 4 #1 T Q E Q E Q E 2 2#1 2 rev. 2#1 Dummy Insert Harpooned ontact 150pts NEW 6
ARIN 600 eries Insert Layouts & ontact Types hell size 2 & 3 avity & F 100 pts 85 pts 68Q2 62Q2 62T2 100 #22 80 #22 4 #20 1 #16 68 #22 60 #22 2 #16 60 #22 2 #16 P Q E P Q E P T 59 pts 34 pts 20T4 20Q4 112 50 #22 5 #16 4 #12 NEW 24 #20 10 #16 P P P T P Q E P 20 #20 4 #8 20 #20 4 #8 4 #20 3 #16 4 #12 2 #5 11Q2 4 #20 3 #16 4 #12 11T2 4 #20 3 #16 4 #12 P Q E P T Q E Q6 6 #8 Dummy Insert Harpooned ontact 100pts NEW ontacts type rimped contacts P T Q ignal #22 tandard, tandard with selective plating, hromel, Alumel Power #20, #16, #12 tandard and small barrel oax #8, #5, #1 able #8 able #5 able #1 able #1 for TA RG 400 / U RG 58 /U RG 142 B/U RG 141 A/U RG 174 A/U RG 178 B/U RG 180 B/U RG 141 A/U RG 142 B/U KX 23 RG 165 / U Filotex E0406WD Filotex 50MFFB GOREW39214 RG 188 A/U RG 195 A/U RG 196 A/U RG 233 / U RG 316 / U RG 400 / BU RG 214 / U RG 225 / U RG 393 / U Triax #8 For cable EN3375-004, MIL--17176 Quadrax #8 and Twinax #8 KX 21A KX 22A KX 23 5021K1011 NA 935359 WB Ficela 1703/3 Filotex 50MTKT RG 400 / BU P tail contacts P T Q E ignal #22 and Power #20, #16, #12, #8 0.15 inch (3.81 mm) 0.25 inch (6.35 mm) 0.375 inch (9.52 mm) 0.5 inch (12.7 mm) Gold or tin plated Triax #8 With P tail L = 0.25 inch (6.35 mm) Quadrax #8 With P tail L = 0.25 inch (6.35 mm) Gold or tin plated ELIO fiber optic with #8 adaptor Wire wrap #22 0.25 inch (6.35 mm) 0.375 inch (9.52 mm) 0.5 inch (12.7 mm) Filler plug for sealed version only #22, #20, #16, #12, #8 and #5 available Dummy contact for all sizes avity reducer #5 to #12, rear and front release #8 to #12, rear release #8 to #16, rear release 7
Reliable People, Reliable olutions Your local contact www.souriau.com contactmilaero@souriau.com 10-31-1299 Our contribution to environmental protection: This catalog is printed on PEF certified paper Advancement of sustainable wood cultivation. www.pefc.org WPARIN600WUEN02 opyright OURIAU Apr 2015 - OURIAU is a registered trademark All information in this document presents only general particulars and shall not form part of any contract. All rights reserved to OURIAU for changes without prior notification or public announcement. Any duplication is prohibited, unless approved in writing.