Performance Precision Optic Professional Inground LED Fixture Concept: 4 LED projector incorporating maximum precision and control for specific aimed illumination of objects. Housing: 8 tall x 6.625 diameter diecast aluminum housing. Materials: Anodized and powder coated black diecast aluminum heat sink body. PVC installation sleeve and stainless steel (AISI316L) trim ring with extra clear glass. Trim: Ultra flat round or square decorative rings, with beveled edge in brushed natural, bronze or black finishes. Features tamperproof Torx screws. Optic: 4 LED gimbal optical system with two different beam spreads; Narrow Spot 11º and Flood 31. Adjustability: 20 tilt on the vertical axis and rotates 350º on the horizontal plane with integrated locking system. with integrated locking system. Mounting: Flush and semiflush installation sleeves or optional raised installation tube for landscape. Fixture includes screw down holes and stainless steel screws for attachment to installation sleeve. Includes optional stainless steel L brackets for support mounting. installation sleeve (required) for flush or semiflush mounting. Driver: Integrated universal voltage IP68 electronic driver complete with watertight IP68 (010V dimming on request). : Fixture flush mount installation includes 8 tall x 6.625 diameter sleeve, extension pipe for wire slack and accessibility. Precabled with 6ft IP68, direct burial brass ingrade jbox (required, sold separately). Wattage: 11W Color Temperature: 3000ºK / 4000ºK CRI: 84 CRI Lumen Maintenance (L70): 50,000hrs Calculation for LED fixtures are based on measurements that comply with with IES LM80. Voltage: Universal Voltage 120277V AC 50/60Hz IK Rating: IK10 IP Rating: IP68* Load Rating: Resistant to static loads up to 20KN in flush mounted cement and pavement installations. Certifications: culus Wet Listed E477426 Tested in accordance with LM7908 A Title 24 commercial installation compliant. Warranty: 5 year limited warranty * Up to 1 METER DEPTH of water for up to a maximum of 30 MINUTES ** Not suitable for submersible installations 1 2 weeks KEPLERO MINI GIMBAL with Clear Lens CALIFORNIA T24 COMPLIANT A Drive Over IP67 IP68 Cool Cool Touch Touch Lumens: 3000ºK 4000ºK Spot 11º = 613Lm 649Lm Flood 31º = 572Lm 607Lm PRODUCT CODE DRIVER TYPE OPTICS WATTAGE COLOR TEMP + TRIM & INSTALLATION KPLM KEPLERO Mini ND Nondimming driver GMB Gimbal SP Spot 11º L1 11W 30 3000K Required (See Pg 2) 10 010V Dimming FL Flood 31º 40 4000K 1 2 weeks KPLMNDGMBSPL130 + 1E2525 + 1DU2521 + ** ** Lead time for quick ship fixtures is 12 weeks from processed PO date. Consult factory for quantites of over 20 fixtures to confirm lead time. Views 6.34 8.00 04.2 06.34 04.2 6.50 Targetti USA A Targetti Group Company 750A W. 17 th St. Costa Mesa, CA 92627 Phone (714) 5131991 Email: targettiusa@targetti.com www.targetti.us 10.07.18 Page 1 of 5
TRIM RING (REQUIRED) CHOOSE 1 1E2525 1DU2525B 1DU2525K 1E2526 1DU2526B CONSULT FACTORY Round brushed natural stainless steel (AISI316L) decorative ring. Round brushed bronze stainless steel (AISI316L) decorative ring. Round Black stainless steel (AISI316L) decorative ring. 10mm thick extra clear protective glass. Silicone gasket. Tamper proof (AISI316L) Torx screws. Square brushed natural stainless steel (AISI316L) decorative ring. Square brushed bronze stainless steel (AISI316L) decorative ring. Square Black stainless steel (AISI316L) decorative ring. 10mm thick extra clear protective glass. Silicone gasket. Tamper proof (AISI316L) Torx screws. INSTALLATION SLEEVE (REQUIRED) CHOOSE 1 1DU2521 1DU2522 1DU434436 1DU434418 1DU434412 sleeve for concrete pour applications. Grey Nylon 8 casing with 10 PVC installation outer pipe. Round ring for flush or semiflush installations. sleeve for concrete pour applications. Grey Nylon 8 casing and stainless steel profile with 10 PVC installation outer pipe. Square ring for flush installation only. For use with square trim options only. Raised installation sleeve for landscape applications. 36 H black stainless steel, includes 8 inner sleeve. To be used with round trim options. (Field cuttable. Used for fixture elevation 21 above ground). Not suitable with 1DU2521 and 1DU2522. Raised installation sleeve for ground cover (succulents and low level planting) applications. 18 H black stainless steel, includes 8 inner sleeve. To be used with round trim options. (Field cuttable. Used for fixture elevation 7 above ground). Not suitable with 1DU2521 and 1DU2522. Raised installation sleeve for turf applications. 12 H black stainless steel, includes 8 inner sleeve. To be used with round trim options. (Field cuttable. Used for fixture elevation 3 above ground). Not suitable with 1DU2521 and 1DU2522. OPTICAL ACCESSORIES: Maximum of one optical filter or louver accessory per fixture. 1T1712 1T1713 1T1714 1T1715 1T1716 1T1777 1T1786 1T1759 1T1708 1T1711 1E2523 INSTALLATION ACCESSORIES: 1E2495 1E2524 1E0388 Chromatic filter Red. Glass made, with dichroic treatment. Chromatic filter Green. Glass made, with dichroic treatment. Chromatic filter Blue. Glass made, with dichroic treatment. Chromatic filter Yellow. Glass made, with dichroic treatment. Chromatic filter Magenta. Glass made, with dichroic treatment. Chromatic filter Cold tone. Interference glass filter to vary the colour temperature of light. Chromatic filter Gold tone. Interference glass filter to vary the colour temperature of light. Chromatic filter Peach tone. Interference glass filter to vary the colour temperature of light. Parallel ribbed glass light blade filter. This makes the beam take on an oval shape and when combined with spotlights, the light blade appears more prominent. Antiglare grid. Black lacquered metal honeycomb structure. Half Moon Anti glare shutter. Black finish. Can be used as one per fixture with a filter or louver, not considered as part of the maxiumum optical accessories. Direct burial brass ingrade jbox. Features stainless steel cover screws and strain relief for power cord, (2) 3/4 NPT bottom holes and (2) 3/4 NPT side holes. Includes (4) 3/4 to 1/2 adaptors and (2) 1/2 NPT plugs. (REQUIRED) Antivandal torx head. Suggested one per 5 fixture. Fixture metal maintenance removal handle. Helpful one per 10 fixtures. Glass suction removal tool. Helpful one per 20 fixtures. Round Trim Ring Square Trim Ring Chromatic Filters Tonal Filters 1DU2522 1E2495 1T1708 1T1711 1E2524 1E0388 1E2523 Targetti USA A Targetti Group Company 750A W. 17 th St. Costa Mesa, CA 92627 Phone (714) 5131991 Email: targettiusa@targetti.com www.targetti.us 10.07.18 Page 2 of 5
Diagram Concrete Pour Application Flush Mount Assembly 1DU2521 and 1DU2522 s 06.53 (1DU2521) 6.61 (1DU2522) Finish 8 11.5 10 8 installation sleeve 10 PVC installation pipe Semi Flush Mount Assembly 1DU2521 Only 06.53 (1DU2521) Beveled trim ring 0.08 H Finish 8 11.5 10 8 installation sleeve 10 PVC installation pipe Targetti USA A Targetti Group Company 750A W. 17 th St. Costa Mesa, CA 92627 Phone (714) 5131991 Email: targettiusa@targetti.com www.targetti.us 10.07.18 Page 3 of 5
KEPLERO MINI GIMBAL Diagram Landscape Application Recommended for Landscape Recommended for Ground Level 1DU434436 with Round Trim ONLY 1DU434418 with Round Trim ONLY 7 18.00 in 11 Min. 21 36.00 in Body Recommended for Turf 1DU434412 with Round Trim ONLY 3 ody 15 Min. 12.00 in Min. eeve Targetti USA A Targetti Group Company 750A W. 17th St. Costa Mesa, CA 92627 Body Phone (714) 5131991 Email: targettiusa@targetti.com www.targetti.us 10.07.18 Page 4 of 5
Photometry Narrow Spot Polar Graph Cone of Light Fixture Power 11W (Ft) Max Med Fixture Output 613Lm 649Lm ftcd ftcd Kelvin Temp 3000ºK 4000ºK 25.00 18 12 Beam Spread SP 11º SP 11º 20.00 29 18 IMax 14844cd/klm 14844cd/klm 15.00 51 33 Efficacy 56 Lm/W 59 Lm/W 10.00 114 73 5.00 456 293 Flood Polar Graph Cone of Light Fixture Power 11W (Ft) Max Med Fixture Output 572Lm 607Lm ftcd ftcd Kelvin Temp 3000ºK 4000ºK 20.00 5 3 Beam Spread FL 31º FL 31º 16.00 8 5 IMax 2748cd/klm 2748cd/klm 12.00 15 9 Efficacy 52 Lm/W 55 Lm/W 8.00 33 20 4.00 132 80 Targetti USA A Targetti Group Company 750A W. 17 th St. Costa Mesa, CA 92627 Phone (714) 5131991 Email: targettiusa@targetti.com www.targetti.us 10.07.18 Page 5 of 5