REFRIGERATION APPLIANCES SERVICE AND ORIGINAL EQUIPMENT

REFRIGERATION APPLIANCES SERVICE AND ORIGINAL EQUIPMENT

Validity clause V The LOKRING tube connection technology represents a proven method of producing hermetically sealed metal-to-metal tube connections. The LOKRING tube connections are mainly used in the air conditioning and refrigeration industries. The use of LOKRING tube connection technology in other fields is to be discussed with VULKAN LOKRING. VULKAN LOKRING as the supplier is responsible for the qualitative delivery of the tube connections and tools which are ordered from this catalogue. The purchaser is responsible for the use of the LOKRING tube connections and tools as directed. The assembly has to be done accordingly to the instructions and exclusively with original LOKRING parts. The present Refrigeration Appliances shall replace all previous editions, any previous printings shall no longer be valid. The data contained in this catalogue refers to the valid state of affairs in time of the copy deadline. Any changes due to technical progress are reserved. Status 04/2013 All duplication, reprinting and translation rights are reserved. Further remarks for the LOKRING assembly are available on request.

TABLE OF CONTENTS 04 VULKAN LOKRING 04 AREAS OF APPLICATION 08 LOKRING IN DOMESTIC APPLIANCES AND SMALL REFRIGERATION SYSTEMS 10 YOUR ADVANTAGES WITH LOKRING 14 THE LOKRING FUNCTIONAL PRINCIPLE 17 OUR QUALITY MANAGEMENT 18 TÜV CERTIFICATION AND TECHNICAL FEATURES 20 LOKRING : SOLDER-FREE TUBE CONNECTION TECHNOLOGY 22 ASSEMBLY TOOLS 24 BASIC EQUIPMENT 26 CONNECTORS 29 ANGLED CONNECTORS 30 REDUCING CONNECTORS 34 ANGLED AND REDUCING CONNECTORS 35 T-REDUCING CONNECTORS 36 PLUG-TYPE NECKS AND REDUCING ADAPTERS 37 LOW-PRESSURE CONNECTION 38 DRiERS 40 FILLING TUBES 41 COPPER AND CAPILLARY TUBES 42 TUBE CUTTER AND CLAMPING TOOLS 44 DRILLING AND PIERCING TOOLS 46 LOKTRACE: TRACE GAS LEAK DETECTION 48 LOKTRACER TLD.500 49 LOKTRACER TLD.1000 50 SERVICE 52 INFORMATION FAX 53 ORDER FORM 54 INDEX

04 VULKAN LOKRING Welcome to VULKAN LOKRING we are your global partner for top connections Refrigeration Appliances Household refrigeration appliances (refrigerators and freezers, wine coolers) Ready-to-use refrigeration equipment (refrigeration cabinets, bars, lockers and chillers) Refrigeration equipment for catering (sales counter refrigerators, flow-through coolers and portable cooling systems) Refrigeration and Air conditioning Technology Air conditioning systems (split, multi-split, VRV, HVAC) Commercial product refrigeration Heat pumps Solar thermal energy Geothermal energy

VULKAN LOKRING 05 For more than 30 years now, VULKAN LOKRING s success has been founded on solder-free tube connection technology for refrigerant lines. Originally developed for the absolute extreme conditions of space technology, we have continually improved our connections to meet the requirements of air condtioning technology, thus developing into the leading specialist in this area on the world s market. In the meantime, more than 1,000,000,000 LOKRING tube connections have been successfully used in the industrial volume production of vehicle air conditioning systems, cooling and freezing units. Since then, VULKAN LOKRING has used the expertise gained as an original equipment manufacturer for industrial applications for the development of its tube connections. This enables VULKAN LOKRING to offer you a coordinated system of tube connections with TÜV certificate and in OEM quality for almost every installation or service situation. OEM PRODUCTION Household refrigeration appliances (refrigerators and freezers, wine coolers) Motor vehicle air conditioners Building air conditioners Heat pumps VEHICLE air conditioning Motor vehicles Utility vehicles Special vehicles Buses

06 VULKAN LOKRING LOKRING: saves time and money over 1,000,000,000 x used and tüv certified* * lokrings are used by leading manufacturers of refrigerators for original equipment ex factory. even the auto industry relies on vulkan lokring: www.vulkan.com

if i can do it, you can too! VULKAN LOKRING 07

08 VULKAN LOKRING the LOKRING-service-concept repairs quickly, hermetic, versatile range of application The patented LOKRING tube connection system provides an innovative system of solder-free tube connections for every installation situation in refrigeration and air-conditioning technology. LOKRING tube connections can be made without a great deal of force being necessary, using simple hand assembly tools. LOKRING tube connections guarantee an absolutely clean, permanent and purely mechanical tube connection with longterm hermetic air-tightness. This is confirmed by the special TÜV test and approval. All this makes the LOKRING tube connection an economical and reliable method of connecting refrigerant tubes. Among the LOKRING system s many possible applications in household appliance- and refrigeration technology* are for tubes that carry refrigerant in any of the following: DOMESTIC REFRIGERATION APPLIANCES (refrigerators and freezers, wine coolers) PLUG-IN REFRIGERATION UNITS (refrigerated displays, counters, trays and islands) REFRIGERATION UNITS FOR CATERING APPLICATIONS (bar cooling systems, circulation coolers, line cooling devices) * Are you looking for a concept that allows weld-free installation for refrigeration and climatic technology or do you need to repair an auto A/C system? Please order the respective information material on page 52.

VULKAN LOKRING 09 LOKRING TUBE CONNECTIONS LOKRING TUBE CONNECTIONS Type-examination tested R134a R290 R404 A R407C R410A R600A comply with the applicable requirements ONE SYSTEM UNLIMITED POSSIBILITIES Replacing a compressor Replacing a drier Repairing a charging tube Repairing leaky tube connections: Connectors, including reducer connectors, elbow and T connectors, Connectors for joining a capillary tube with the suction line, Connectors with Schrader valve summary: Never say never!

10 VULKAN LOKRING without LOKRING plug-in refrigeration units Stop transportation or extensive fire protection requirements Interruption of business operations Damage during repair from soldering Ignition hazard due to flammable refrigerants Toxic gases (phosgene, hydrochloric acid, dioxin) Use of nitrogen against oxygenation Inconvenient for chefs and customers alike 9:30am 07.04.12 10:30am 07.04.12 08:00pm 07.04.12 FREEZER IS DEFECTIVE, SERVICE TECHNICIAN COMES THE PRODUCT MUST BE DISASSEMBLED AND TRANSPORTED A FORKLIFT IS USED TO TRANSPORT THE DEFECTIVE UNIT 8:30am 08.04.12 8:00am 09.04.12 8:00am 10.04.12 THE UNIT IS WRAPPED IN TRANSPORT PACKAGING AND LOADED ONTO A TRUCK, THUS THERE IS A RISK OF DAMAGE DUR- ING TRANSPORT THE UNIT IS REPAIRED, WHICH GENER- ATES HAZARDOUS GASES AND CONTAMI- NANTS THE REPAIRED UNIT IS PACKED UP AGAIN AND RETURNED BY TRUCK, AGAIN INCUR- RING THE RISK OF TRANSPORT DAMAGE 8:00am 12.04.12 9:00am 12.04.12 10:00am 12.04.12 THE REPAIRED UNIT IS FINALLY RE- TURNED TO ITS ORIGINAL LOCATION IN THE SUPERMARKET ON A FORKLIFT THE UNIT IS AGAIN FILLED WITH THE PRODUCT THE SUPERMARKET OWNER IS UNHAPPY WITH THE HIGH REPAIR COSTS AND LOST SALES

VULKAN LOKRING 11 with LOKRING plug-in refrigeration units Solder-free tube connection with TÜV certification Permanent hermetic seal Up to 40 % savings of cost and time Assembly possible in high combustion areas, even with heavy foot traffic or during business operations Customer-friendly onsite service Simple assembly without power connection Clean, fast, and customer-friendly 9:00am 07.04.12 10:00am 07.04.12 10:30am 07.04.12 FREEZER IS DEFECTIVE, SERVICE TECHNICIAN COMES UNIT IS REPAIRED ONSITE, THUS AVOID- ING TRANSPORTING OF PRODUCT. CUSTOMERS CONTINUE SHOPPING LOW COSTS THANKS TO MINIMAL TIME NEEDED AND ONSITE REPAIR! LOKRINGING: advantages you can not ignore.

12 VULKAN LOKRING without LOKRING Domestic REFRIGERATION APPLIANCES Heavy soldering- and nitrogen equipment Use of nitrogen against oxygenation Noxious odors and toxic gases are produced Ignition hazard from flammable refrigerants Surface damage caused during welding Damage during repair caused by welding igniters in the lines Cost-intensive, labor-intensive, and not customer-friendly 20 22 8:30am 20.04.12 8:50am 20.04.12 11:00am 22.04.12 empty the appliance, remove it remove the appliance, damage during transportation is possible use of the appliance is not possible 23 6:30am 22.04.12 8:00am 23.04.12 8:00am 24.04.12 Pack up the appliance and send it to a service repair shop reparation of the appliance in the service repair shop pack up the appliance and return it to the customer 24 25 9:30am 24.04.12 9:50am 24.04.12 9:55am 24.04.12 carry the appliance upstairs again, possible damage during transportation reintegration of the appliance COST-INTENSIVE, LABOR-INTENSIVE AND NOT CUSTOMER-FRIENDLY

VULKAN LOKRING 13 with LOKRING Domestic REFRIGERATION APPLIANCES Solder-free tube connection with TÜV certification Permanent hermetic seal and pressure-resistant Up to 40 % savings of cost and time Repair in a reasonable time No shop transport or fire protection required Customer-friendly onsite service Simple assembly without power connection Clean, fast, and customer-friendly 20 9:00am 20.04.12 9:05am 20.04.12 10:00 Uhr 20.04.12 move the appliance appliance repaired on site, average repair time - 20 Minutes. reintegration of the refrigerator! LOKRINGING: advantages you can not ignore.

14 VULKAN LOKRING LOKRING ASSEMBLY AND FUNCTIONAL PRINCIPLE one joint, two rings, Four steps - that s all there ist to do. A LOKRING tube connection can be made without a great deal of effort. All you need is a LOKRING tube connection, a hand assembly tool and some LOKPREP. * The ergonomic hand assembly tool works without energy connection, and the patented lever mechanism means extremely little strength is needed for assembly. Compare it with conventional tube connection methods for yourself, and you will see that»lokringing«has the potential to become a classic. Where DIY experts have their»rawl plugs«or»flex«-cut materials, you and your customers could be»lokringing«in all sorts of situations. * The tube reduction or connection is shown disproportionately to clearly illustrate the functional principle. the components of a lokring connection JOINT LOKRINGs lokprep fluid HAND assembly tool

VULKAN LOKRING 15 STEP 01 treat the tube ends To make a tube connection, the tube ends must be metallic bright and free of longitudinal grooves caused by production. To remedy this, clean the tube ends with our sandpaper or abrasive mats. STEP 02 apply lokprep Next, moisten the whole tube circumference with LOKPREP by guiding the bottle 360 around the circumference of the tube. Apply the LOKPREP a little away from the cut edge to avoid it getting onto the inside of the tube. Depending on the repair situation, there are several different possibilities of applying LOKPREP over an area - see page 16. STEP 03 insert tubes Then insert the tube ends with the LOKPREP film into the joint. Make sure that the ends of the tubes are inserted to the inner limit of the joint and remain fixed in this position during assembly. STEP 04 press* Finaliy, place the assembly jaws behind the two LOKRINGs and press the two LOKRINGs axially along the joint until these lie flush on the assembly path - and that s it! * There is an example of the pressing procedure with assembly version 00. Assembly instructions for versions 25 and 50 are provided on page 26.

16 VULKAN LOKRING THIS so wird ENSURES ihre rohrverbindung A FLAWLESS TUBE CONNECTION rundum perfekt. ALL AROUND. LOKPREP lokprep FLUID fluig AND und LOKRING MATERIAL werkstoffkombination COMBINATIONS A Spreading THE LOKPREP Rotate the moist tube through 360 inside the joint or B rotate the joint through 360 around the end of the tube or... C... move the nozzle 360 around the tube to distribute the LOKPREP evenly. 360 LOKPREP FOR THE TUBE NO WORRIES FOR YOU ALL ROUND. Metal tubes can have longitudinal grooves on the surface from production. These production-related faults can be compensated quite easily by moistening the tube ends to be connected with LOKPREP fluid before assembly. Thanks to its capillary characteristic, it can even flow into microscopic cavities and fill these out completely. LOKPREP is not an adhesive, rather an anaerobic sealant which hardens under oxygen exclusion and in contact with free metal ions. Its elastic structure is permanently retained in a temperature range of 50 to +150 C thus compensating material-specific deformations due to fluctuations in temperature. Since LOKPREP does not contain solvents which have to evaporate during hardening, the finished connection is ready for use shortly after assembly. LOKRING MATERIAL COMBINATIONS * What connections are possible with LOKRINGs? It s very simple: Any metal tube commonly used in refrigeration and climatic technology. The possible combinations are almost limitless. The following can be used a rule of thumb: If at least one of the tubes being connected is made of aluminum, then a LOKRING made of aluminum must also be used. In all other cases, a brass LOKRING is used. In cases of special tube materials, tube coatings, or environmental effects on the material, we ll be happy to provide assistance. * up to 25 bar both standard applications MATERIAL ASSIGNMENT Copper Brass Steel Aluminium

VULKAN LOKRING 17 wenn WHEN wir WE SWAP ringe RINGS, tauschen, WE RE ist MAKING das ein A PROMISE. versprechen garantiert GUARANTEED durch BY QUALITY qualitätksontrolle CONTROL,TÜV AND und UL CERTIFICATE. tüv zertifikat LOKRING QUALITY AND environmental MANAGEMENT The name VULKAN LOKRING has been standing for top quality for 30 years. Our quality and environmental management system has been certified by the material testing authority in North-Rhine Westphalia according to DIN EN ISO 9001:2008 and DIN EN 14001:2005. To guarantee this quality permanently, we manufacture our LOKRING tube connections using our own production and control procedures. Thanks to highly developed systems for industrial image processing, we manage to carry out dimension tolerance checks on all the LOKRING tube connections produced. As an original equipment manufacturer to the automotive industry, we are used to not making mistakes. MPA NRW. Materialprüfungsamt Nordrhein-Westfalen Zertifiziertes Qualitätsmanagement-System nach DIN EN ISO 9001:2008 Reg.-Nr. MPA NRW Q 030

18 VULKAN LOKRING LOKRING : superior technology tüv-certified quality with load capacity up to 4,000 kg.! THE LOKRING TUBE CONNECTION NOT ONLY PASSED THE TÜV S PROTOTYPE TESTING WITH FLYING COLORS, IT EVEN EXCEEDED THE STANDARD WITH REGARD TO SEALING, LOAD CAPACITY, AND RELIABILITY.

VULKAN LOKRING 19 without LOKRING with LOKRING with Know-how Made in Germany technical features Hermetically sealed metal/metal tube connection through surface compression, i.e. no O-ring or cutting ring seal. Permanent tube connection according to EU standard EN 378-2 Purely mechanical tube connection, i.e.»cold«tube connection without thermal method such as soldering or welding. PERMISSIBLE AREAS OF APPLICATION Operating pressure: 50 bar with 5-fold safety, i.e. 250 bar. Temperature range: 50 C to +150 C Tube diameter: 1.6 to 35 mm Tube wall thickness: 0.5 to 1.5 mm We will be happy to provide advice on further areas of application. TÜV-test result requirement Leak test Airtight (< 2 x 10-6 mbar l/s helium 4.6) Temperature and alternating pressure resistance test Air-tightness after 2600 cycles with temperatures changing between -10 C and 110 C and pressure loads alternating by up to 40 bar during a cycle period of 15 min. Burst test 5 x rated pressure (250 bar) Inner pressure threshold test Pressure test Alternating bending test 2 x 10 5 load change from 1 50 bar At least 1.1 x rated pressure (gaseous) 2 x 10 5 load change, inner pressure 50 bar

20 LOKRING LOKRING TUBE CONNECTION TECHNOLOGY easy. quick. hermetically sealed.

LOKRING 21

22 LOKRING ASSEMBLY TOOLS FOR LOKRING CONNECTIONS LOKTOOL: HMRK-V Hand assembly tool HMRK-V LOKTOOL Hand assembly tool* The flexible model. The two-sided bendable handles allow for optimal LOKRING assembly up to a maximum diameter of ø 13 mm, even in difficult-to-access areas. Thanks to the patented lever mechanism, the assembly can be completed with minimal effort and without a power supply. The relevant assembly jaws can be easily replaced, so all you need is one assembly tool. Article no. Article name Description L13003829 LOKtool HMRK-V Hand assembly tool * Assembly jaws not included. LOKTOOL: mb x Assembly jaws LOKTOOL Assembly jaws for single- and double-sided assembly 00 25 50 The assembly jaws fit all the hand assembly tools. They can be replaced quickly and easily, thus making LOKRING assembly possible with only one tool for different tube diameters. For assembly it is necessary to use two assembly jaws. The unit is one piece. Article no. Article name For tube outer ø Article no. Article name For tube outer ø Article no. Article name For tube outer ø L20000200 MB 8 to 8.5 mm L20000305 MB 10 EVP 6 8.5 mm L20000304 LOKtool MB 8 EVP up to 8 mm L20000201 MB 10 L20000202 MB 12 up 9 11 mm 12 13 mm L20000307 MB 16 EVP 11 13 mm L20000305 LOKtool MB 10 EVP L20000306 LOKtool MB 12 EVP 9-11 mm 12-13 mm SAMPLE ORDERS: LOKRING 9,53/6 NR Ms 00 LOKRING 13/8 NWR Ms 25 LOKRING 8 NWK Ms 50 * See page 26 for additional information on special assembly versions. 1 x MB 10 1 x MB 8 1 x MB 16 EVP 1 x MB 10 EVP 2 x MB 8 EVP

LOKRING 23 LOKprep: 65G Anaerobic sealant LOKPREP 65G, Sealant for LOKRING assemly* LOKPREP was developed especially for LOKRING assembly and always must to be used wherever LOKRINGs are to be fitted. Article no. Article name Content L14000878 LOKprep 65G 15 ml 15 ml * A detailed description of the use of LOKPREP can be found on page 16. LOKTOOL: SL Sandpaper LOKTOOL Sandpaper For cleaning tube ends Article no. Article name Description L14000002 LOKtool SL Sandpaper Grain: 120 Dimensions: 230 mm x 280 mm Packing unit: 1 sheet In top 3M quality loktool: sv.3 Abrasive mat LOKTOOL Abrasive mat For cleaning tube ends Suitable for all surfaces Solvent-resistant Dimensions: 158 mm x 224 mm Packing unit: 3 mats In top 3M quality Article no. Article name Description L13004251 LOKtool SV.3 Abrasive mat LOKTOOL: VME x Pre-assembly fitting LOKRING 00er Pre-assembly fitting Using the appropriate pre-assembly fitting, a LOKRING connection for two-sided assembly (00 series) can be pre-assembled on a single side. * See the special assembly series on page 26. Article no. Article name Description L13000982 Pre-assembly fitting VME 3 for 3 NK Ms 00 L13000871 Pre-assembly fitting VME 5 for 5 NK Ms 00 L13000872 Pre-assembly fitting VME 6 for 6 NK Ms 00 L13000873 Pre-assembly fitting VME 7 for 7 NK Ms 00 L13000874 Pre-assembly fitting VME 7,5 for 7,5 NK Ms 00 L13000875 Pre-assembly fitting VME 8 for 8 NK Ms 00 L13001107 Pre-assembly fitting VME 9,53 for 9,53 NK Ms 00 L13000876 Pre-assembly fitting VME 10 for 10 NK Ms 00 L13000877 Pre-assembly fitting VME 11 for 11 NK Ms 00 L13000878 Pre-assembly fitting VME 12 for 12 NK Ms 00 L13000879 Pre-assembly fitting VME 13-12,7 for 12 NK Ms 00

24 LOKRING LOKRING BASIC Equipment THE PERFECT STARTER PACKAGE LOKtool Hand assembly tool Assembly jaws LOKprep Drier NTR-insert NAV-assembly tool T-reducing connectors (Insertion of capillary tube into the suction line) Charging tubes Aluminium-connectors and reducers Brass-connectors and reducers NAV-connector Brass stopper

LOKRING 25 LOKBOX: Complete equipment LOKbox KA-02 Complete equipment All you need for a perfect start in the world of quick, easy and lowcost installation and repairs of refrigeration systems in a Sortimo steel case with clear inner compartments. Article no. Article name Description L13000848 LOKbox KA-02 Complete equipment Set in case Technical Data Dimensions (L x B x H): Weight: Empty weight: 440 x 330 x 130 mm 11.5 kg 5.7 kg Items available separately See table below Article no. Article name Description Quantity* L13003829 LOKtool HMRK-V Hand assembly tool 1 L20000200 LOKtool MB 8 Assembly jaw up to 8.5 mm 2 L20000201 LOKtool MB 10 Assembly jaw 9 to 11 mm 2 L13000930 LOKRING 5/1,8 NR Ms 00 Brass connector 5 L13000619 LOKRING 5/2 NR Ms 00 Brass connector 5 L13000620 LOKRING 5/3 NR Ms 00 Brass connector 2 L13000622 LOKRING 5/4 NR Ms 00 Brass connector 2 L13000630 LOKRING 6/5 NR Ms 00 Brass connector 10 L13000634 LOKRING 6,5/5 NR Ms 00 Brass connector 5 L13000638 LOKRING 7/5 NR Ms 00 Brass connector 5 L13000639 LOKRING 7/6 NR Ms 00 Brass connector 2 L13000645 LOKRING 7,5/6 NR Ms 00 Brass connector 2 L13000653 LOKRING 8/5 NR Ms 00 Brass connector 3 L13000654 LOKRING 8/6 NR Ms 00 Brass connector 10 L13000657 LOKRING 8/7 NR Ms 00 Brass connector 1 L13000658 LOKRING 8/7,5 NR Ms 00 Brass connector 2 L13000683 LOKRING 9,53/5 NR Ms 00 Brass connector 2 L13000684 LOKRING 9,53/6 NR Ms 00 Brass connector 6 L13000686 LOKRING 9,53/8 NR Ms 00 Brass connector 1 L13000690 LOKRING 9,53/9 NR Ms 00 Brass connector 1 L13000696 LOKRING 10/8 NR Ms 00 Brass connector 1 L13000705 LOKRING 11/6 NR Ms 00 Brass connector 1 L13000706 LOKRING 11/8 NR Ms 00 Brass connector 1 L13000502 LOKRING 5 NK Al 00 Aluminium connector 2 L13000503 LOKRING 6 NK Al 00 Aluminium connector 1 L13000505 LOKRING 7,5 NK Al 00 Aluminium connector 1 L13000506 LOKRING 8 NK Al 00 Aluminium connector 1 L13000963 LOKRING 4/2,5 NR Al 00 Aluminium reducing connector 2 L13000962 LOKRING 5/2,5 NR Al 00 Aluminium reducing connector 2 L13000528 LOKRING 6/5 NR Al 00 Aluminium reducing connector 4 L13000531 LOKRING 7/5 NR Al 00 Aluminium reducing connector 2 L13000532 LOKRING 7/6 NR Al 00 Aluminium reducing connector 1 Article no. Article name Description Quantity* L13000540 LOKRING 8/6 NR Al 00 Aluminium reducing connector 1 L13000541 LOKRING 8/7 NR Al 00 Aluminium reducing connector 1 L13000542 LOKRING 8/7,5 NR Al 00 Aluminium reducing connector 1 L13000550 LOKRING 9/8 NR Al 00 Aluminium reducing connector 1 L13000776 LOKRING 6 NK Ms SV 00 Brass connector with schrader valve 1 L13000778 LOKRING 8 NK Ms SV 00 Brass connector with schrader valve 1 L13000789 LOKRING 8/6 NR Ms SV 00 Brass reducing connector with schrader valve 1 L13000790 LOKRING 8/7,5 NR Ms SV 00 Brass reducing connector with schrader valve 1 L13000794 LOKRING 9,53/6 NR Ms SV 00 Brass reducing connector with schrader valve 1 L13000748 LOKRING 7/6/2 NTR Ms 00 Brass T-reducing connectors 1 L13000750 LOKRING 7,5/6/2 NTR Ms 00 Brass T-reducing connectors 1 L13000751 LOKRING 8/6/2 NTR Ms 00 Brass T-reducing connectors 1 L13000817 LOKRING 6 NAV NAV-connector 2 L13000818 LOKRING 7 NAV NAV-connector 2 L13000819 LOKRING 7,5 NAV NAV-connector 2 L13000820 LOKRING 8 NAV NAV-connector 2 L13000926 LOKRING 9,53 NAV NAV-connector 2 L13000765 LOKRING 5 VS Ms 00 Brass stopper 3 L13000766 LOKRING 6 VS Ms 00 Brass stopper 3 L13000767 LOKRING 7 VS Ms 00 Brass stopper 3 L13000768 LOKRING 7,5 VS Ms 00 Brass stopper 3 L13000769 LOKRING 8 VS Ms 00 Brass stopper 3 L13000771 LOKRING 9,53 VS Ms 00 Brass stopper 3 L14000143 LOKRING 6 NF Ms SV Charging tube with schrader valve 5 L14000128 LOKRING DR 10 Drier 5 L14000118 LOKRING DRS 15 Drier 5 L14003870 LOKbox Sortimo Stahlkoffer 2, leer Steel case, empty (440 x 330 x 130 mm) 1 L14003871 LOKplus Systembox A3 Plastic system box (52 x 52 x 63 mm) 48 L14003872 LOKplus Systembox B3 Plastic system box (104 x 52 x 63 mm) 5 L14003873 LOKplus Systembox C3 Plastic system box (104 x 104 x 63 mm) 1 L14003874 LOKplus Systembox D3 Plastic system box (156 x 104 x 63 mm) 1 L14003875 LOKplus Systembox G3 Plastic system box (312 x 104 x 63 mm) 1 * Refers to the quantities in the LOKbox KA-02 case.

26 LOKRING OUR SPECIALISTS FOR ANY SPECIFIC INSTALLATION NEEDS DIFFERENT INSTALLATION REQUIREMENTS demand FLEXIBILITY. WHETHER IT S SIMULTANEOUS, STEP-WISE, OR CONFINED INSTALLATIONS OF TWO TubeS LOKRING CAN DO IT! 00 LOKRING 00 FOR SIMULTANEOUS (DOUBLESIDED) INSTALLATION OF TWO Tube ENDS use MB x assembly JAWS!* 25 LOKRING 25 FOR SIMULTANEOUS (DOUBLE-SIDED) INSTALLATION OF TWO Tube ENDS IN CONFINED GAPS use MB x EVP assembly JAWS!* 50 LOKRING 50 FOR STEPWISE (SINGLE-SIDED) INSTALLATION OF TWO Tube ENDS * THE LAST TWO DIGITS INDICATE THE APPROPRIATE INSTALL- LATION VERSION. EXAMPLE: LOKRING 6 NK MS 50 use MB x EVP assembly JAWS!*

LOKRING 27 Connectors FOR SOLDER-FREE CONNECTION OF TubeS LOKRING: x NK MS 00 Brass connectors LOKRING Brass 00 connectors* Article no. Article name Tube outer ø* [mm inch] For connecting copper- and/or steel tubes with identical outside tube diameters. When fitting a 00 size connector, make sure you use MB x assembly jaws. * See page 26 for additional information on special assembly versions. L13000575 LOKRING 1,6 NK Ms 00 1.6 1/16 L13000932 LOKRING 1,8 NK Ms 00 1.8 L13000576 LOKRING 2 NK Ms 00 2 5/64 L13000578 LOKRING 2,2 NK Ms 00 2.2 L13000579 LOKRING 2,5 NK Ms 00 2.5 3/32 L13000580 LOKRING 3 NK Ms 00 3 L13000582 LOKRING 3,2 NK Ms 00 3.2 L13000583 LOKRING 3,5 NK Ms 00 3.5 L13000584 LOKRING 4 NK Ms 00 4 5/32 L13000585 LOKRING 4,5 NK Ms 00 4.5 L13000587 LOKRING 5 NK Ms 00 5 3/16 L13000588 LOKRING 6 NK Ms 00 6 1/4 L13000589 LOKRING 6,5 NK Ms 00 6.5 L13000590 LOKRING 7 NK Ms 00 7 L13000591 LOKRING 7,5 NK Ms 00 7.5 L13000592 LOKRING 8 NK Ms 00 8 5/16 L13001833 LOKRING 8,5 NK Ms 00 8.5 L13000594 LOKRING 9 NK Ms 00 9 L13000595 LOKRING 9,53 NK Ms 00 9.53 3/8 L13000596 LOKRING 10 NK Ms 00 10 1/16 LOKRING: x NK MS 25 Brass connectors LOKRING Brass 25 connectors* The new technology for cramped installation spaces! The special contour of this LOKRING allows space-saving application of assembly jaws. This way even shortened tube ends can be easily lokringed to the compressor, etc. For connecting copper- and/or steel tubes with identical outside tube diameters. Article no. Article name Tube outer ø* [mm inch] L13002950 LOKRING 6 NK Ms 25 6 1/4 L13003669 LOKRING 8 NK Ms 25 8 5/16 When assembling a 25 connector, make sure to use MB x EVP assembly jaws. * See page 26 for additional information on special assembly versions.

28 LOKRING Connectors FOR CONNECTING TubeS LOKRING: x NK AL 00 Aluminium connectors LOKRING Aluminium 00 connectors* Article no. Article name Tube outer ø* [mm Zoll] For connecting aluminium tubes or aluminium tubes with copper- or steel tubes with identical outside tube dimensions. L13000498 LOKRING 2 NK Al 00 2 5/64 L13000942 LOKRING 2,5 NK Al 00 2.5 3/32 L13000499 LOKRING 3 NK Al 00 3 L13000500 LOKRING 3,5 NK Al 00 3.5 L13000502 LOKRING 5 NK Al 00 5 3/16 L13000503 LOKRING 6 NK Al 00 6 1/4 L13000504 LOKRING 7 NK Al 00 7 L13000505 LOKRING 7,5 NK Al 00 7.5 L13000506 LOKRING 8 NK Al 00 8 5/16 L13000507 LOKRING 8,5 NK Al 00 8.5 L13002359 LOKRING 9 NK Al 00 9 L13000508 LOKRING 9,53 NK Al 00 9.53 3/8 L13000509 LOKRING 10 NK Al 00 10 * See page 26 for additional information on special assembly versions.

LOKRING 29 Connectors WITH SCHRADER VALVE FOR FAST SERVICE LOKRING: x NK MS SV 00 Brass connectors with Schrader valve LOKRING Brass 00 connectors with 1/4 SAE Schrader valve* Article no. Article name Tube outer ø* [mm Zoll] For connecting copper- and/or steel tubes with identical outside tube diameters with 1/4 Schrader valve connection. L13000775 LOKRING 5 NK Ms SV 00 5 3/16 L13000776 LOKRING 6 NK Ms SV 00 6 1/4 L13000777 LOKRING 7,5 NK Ms SV 00 7.5 L13000778 LOKRING 8 NK Ms SV 00 8 5/16 L13000779 LOKRING 9,53 NK Ms SV 00 9.53 3/8 L13000780 LOKRING 10 NK Ms SV 00 10 * See page 26 for additional information on special assembly versions. ELBOW Connectors SPACE-SAVING FOR CORNERS LOKRING: x NWK MS 50 Brass elbow connectors LOKRING Brass 50 elbow connectors* 90 elbow for connecting copper- and/or steel tubes with identical outside tube diameters. Article no. Article name Tube outer ø* [mm Zoll] L13004621 LOKRING 6 NWK Ms 50 6 L13004775 LOKRING 6,35 NWK Ms 50 6.35 1/4 L13001978 LOKRING 8 NWK Ms 50 8 5/16 L13001397 LOKRING 9,53 NWK Ms 50 9.53 3/8 L13001313 LOKRING 10 NWK Ms 50 10 * See page 26 for more information on special installation versions. Other sizes available by request or in the refrigeration and climatic technology catalogue.

30 LOKRING REDUCER Connectors TWO DIFFERENT DIAMETERS ONE CONNECTION! LOKRING: x NR MS 00 Brass reducer connector LOKRING Brass 00 reducer connectors* For connecting copper- and/or steel tube with identical outside tube diameters. Select your tube combination from our standard product line to suit your specific needs. * See page 26 for additional information on special assembly versions. SELECTION AID: Step 01 Select reducer connector ø-tube 1 to ø tube 2 of the reducer connector mm Inch 1/16 1.6 1.8 5/64 2 2.2 3/32 2.5 3 3.2 3.5 5/32 4 4.5 3/16 5 1/4 6 6.5 7 7.5 5/16 8 9 3/8 9.53 2 5/64 3 3.2 3.5 4 5/32 01 05 08 02 03 04 06 07 09 10 11 5 3/16 6 1/4 12 13 14 16 15 17 18 19 20 21 22 23 24 25 26 27 28 29 30 6.5 31 32 33 7 34 35 36 37 38 7.5 39 40 41 42 43 44 45 8 5/16 46 47 48 49 50 51 52 53 54 55 56 8.5 57 58 59 60 61 9 62 63 64 65 9.53 3/8 66 67 68 69 70 71 72 73 10 74 75 76 77 78 11 79 80 81 11.5 82 mm Inch 1.6 1/16 1.8 2 5/64 2.2 2.5 3/32 3 3.2 3.5 4 5/32 4.5 5 3/16 6 1/4 6.5 7 7.5 8 5/16 9 9.53 3/8 Reading direction of the table: from left to right. The marked example shows a reducer joint of a tube joint from ø 8 mm to ø 4 mm. 50 The number refers to the Selection help step 02 with the order parameters.

LOKRING 31 SELECTION AID: Step 02 Select product number and description No. Article no. Article name ø* tube 1 p ø* tube 2 [mm Inch] p [mm Inch] No. Article no. Article name ø* tube 1 p ø* tube 2 [mm Inch] p [mm Inch] 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 L13000611 LOKRING 2/1,6 NR Ms 0w0 2 5/64 p 1.6 1/16 L13003115 LOKRING 2/1,8 NR Ms 00 2 5/64 p 1.8 L13001157 LOKRING 3/1,8 NR Ms 00 3 p 1.8 L13000612 LOKRING 3/2 NR Ms 00 3 p 2 5/64 L13000613 LOKRING 3,2/1,6 NR Ms 00 3.2 p 1.6 1/16 L13004807 LOKRING 3,5/1,8 NR Ms 00 3.5 p 1.8 L13000614 LOKRING 3,5/2 NR Ms 00 3.5 p 2 5/64 L13000610 LOKRING 4/1,6 NR Ms 00 4 5/32 p 1.6 1/16 L13000931 LOKRING 4/1,8 NR Ms 00 4 5/32 p 1.8 L13000616 LOKRING 4/2 NR Ms 00 4 5/32 p 2 5/64 L13003694 LOKRING 4/3 NR Ms 00 4 5/32 p 3 L13000618 LOKRING 5/1,6 NR Ms 00 5 3/16 p 1.6 1/16 L13000930 LOKRING 5/1,8 NR Ms 00 5 3/16 p 1.8 L13000619 LOKRING 5/2 NR Ms 00 5 3/16 p 2 5/64 L13000623 LOKRING 5/2,2 NR Ms 00 5 3/16 p 2.2 L13000624 LOKRING 5/2,5 NR Ms 00 5 3/16 p 2.5 3/32 L13000620 LOKRING 5/3 NR Ms 00 5 3/16 p 3 L13000621 LOKRING 5/3,5 NR Ms 00 5 3/16 p 3.5 L13000622 LOKRING 5/4 NR Ms 00 5 3/16 p 4 5/32 L13001806 LOKRING 5/4,5 NR Ms 00 5 3/16 p 4.5 L13000633 LOKRING 6/1,6 NR Ms 00 6 1/4 p 1.6 1/16 L13002334 LOKRING 6/1,8 NR Ms 00 6 1/4 p 1.8 L13000625 LOKRING 6/2 NR Ms 00 6 1/4 p 2 5/64 L13000626 LOKRING 6/2,2 NR Ms 00 6 1/4 p 2.2 L13000627 LOKRING 6/2,5 NR Ms 00 6 1/4 p 2.5 3/32 L13000628 LOKRING 6/3 NR Ms 00 6 1/4 p 3 L13000631 LOKRING 6/3,2 NR Ms 00 6 1/4 p 3.2 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 L13000646 LOKRING 7,5/5 NR Ms 00 7.5 p 5 3/16 L13000645 LOKRING 7,5/6 NR Ms 00 7.5 p 6 1/4 L13001762 LOKRING 7,5/6,5 NR Ms 00 7.5 p 6.5 L13000649 LOKRING 7,5/7 NR Ms 00 7.5 p 7 L13001697 LOKRING 8/1,8 NR Ms 00 8 5/16 p 1.8 L13000651 LOKRING 8/2 NR Ms 00 8 5/16 p 2 5/64 L13000659 LOKRING 8/2,2 NR Ms 00 8 5/16 p 2.2 L13000660 LOKRING 8/3 NR Ms 00 8 5/16 p 3 L13000652 LOKRING 8/4 NR Ms 00 8 5/16 p 4 5/32 L13000661 LOKRING 8/4,5 NR Ms 00 8 5/16 p 4.5 L13000653 LOKRING 8/5 NR Ms 00 8 5/16 p 5 3/16 L13000654 LOKRING 8/6 NR Ms 00 8 5/16 p 6 1/4 L13000656 LOKRING 8/6,5 NR Ms 00 8 5/16 p 6.5 L13000657 LOKRING 8/7 NR Ms 00 8 5/16 p 7 L13000658 LOKRING 8/7,5 NR Ms 00 8 5/16 p 7.5 L13000673 LOKRING 8,5/5 NR Ms 00 8.5 p 5 3/16 L13000674 LOKRING 8,5/6 NR Ms 00 8.5 p 6 1/14 L13002216 LOKRING 8,5/6,5 NR Ms 00 8.5 p 6.5 L13001591 LOKRING 8,5/7 NR Ms 00 8.5 p 7 L13000675 LOKRING 8,5/8 NR Ms 00 8.5 p 8 5/16 L13000677 LOKRING 9/5 NR Ms 00 9 p 5 3/16 L13000678 LOKRING 9/6 NR Ms 00 9 p 6 1/4 L13000681 LOKRING 9/7 NR Ms 00 9 p 7 L13000679 LOKRING 9/8 NR Ms 00 9 p 8 5/16 L13000682 LOKRING 9,53/2 NR Ms 00 9.53 3/8 p 2 5/64 L13000689 LOKRING 9,53/2,2 NR Ms 00 9.53 3/8 p 2.2 L13000683 LOKRING 9,53/5 NR Ms 00 9.53 3/8 p 5 3/16 28 L13000629 LOKRING 6/4 NR Ms 00 6 1/4 p 4 5/32 69 L13000684 LOKRING 9,53/6 NR Ms 00 9.53 3/8 p 6 1/4 29 L13000632 LOKRING 6/4,5 NR Ms 00 6 1/4 p 4.5 70 L13000691 LOKRING 9,53/7 NR Ms 00 9.53 3/8 p 7 30 L13000630 LOKRING 6/5 NR Ms 00 6 1/4 p 5 3/16 71 L13000687 LOKRING 9,53/7,5 NR Ms 00 9.53 3/8 p 7.5 31 L13002437 LOKRING 6,5/4 NR Ms 00 6.5 p 4 5/32 72 L13000686 LOKRING 9,53/8 NR Ms 00 9.53 3/8 p 8 5/16 32 L13000634 LOKRING 6,5/5 NR Ms 00 6.5 p 5 3/16 73 L13000690 LOKRING 9,53/9 NR Ms 00 9.53 3/8 p 9 33 L13000635 LOKRING 6,5/6 NR Ms 00 6.5 p 6 1/4 74 L13000698 LOKRING 10/2 NR Ms 00 10 p 2 5/64 34 L13000637 LOKRING 7/2 NR Ms 00 7 5/32 p 2 5/64 75 L13000695 LOKRING 10/6 NR Ms 00 10 p 6 1/4 35 L13000640 LOKRING 7/4 NR Ms 00 7 p 4 5/32 76 L13000696 LOKRING 10/8 NR Ms 00 10 p 8 5/16 36 L13000643 LOKRING 7/4,5 NR Ms 00 7 p 4.5 77 L13001732 LOKRING 10/9 NR Ms 00 10 p 9 37 L13000638 LOKRING 7/5 NR Ms 00 7 p 5 3/16 78 L13000697 LOKRING 10/9,53 NR Ms 00 10 p 9.53 3/8 38 39 40 41 L13000639 LOKRING 7/6 NR Ms 00 7 p 6 1/4 L13000644 LOKRING 7,5/2 NR Ms 00 7.5 p 2 5/64 L13000647 LOKRING 7,5/3 NR Ms 00 7.5 p 4 5/32 L13000650 LOKRING 7,5/4 NR Ms 00 7.5 p 4 5/32 79 80 81 82 L13000705 LOKRING 11/6 NR Ms 00 11 p 6 1/4 L13000706 LOKRING 11/8 NR Ms 00 11 p 8 5/16 L13000707 LOKRING 11/9,53 NR Ms 00 11 p 9.53 3/8 L13000712 LOKRING 11,5/9,53 NR Ms 00 11.5 p 9.53 3/8

32 LOKRING Reducer connectors TWO DIFFERENT DIAMETERS ONE CONNECTION! LOKRING: x NR AL 00 Aluminium reducer connectors LOKRING Aluminium 00 reducer connectors* For connecting aluminium tubes or aluminium tubes with copper- or steel tubes with variable outside tube dimensions. Select your tube combination from our standard product line to suit your specific needs. * See page 26 for additional information on special assembly versions. SELECTION AID: Step 01 Select reducer connector ø tube 1 to ø tube 2 of the reducer connector Inch mm 1.8 5/64 2 2.2 3/32 2.5 3 5/32 4 3/16 5 1/4 6 6.5 7 7.5 5/16 8 3/8 9.53 2.5 3/32 3 3.2 3.5 4 5/32 02 01 03 04 05 06 07 5 3/16 5.5 6 1/4 08 09 10 11 12 13 14 15 16 17 18 7 19 20 21 22 7.5 8 5/16 8.5 9 9.53 3/8 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 10 11 49 50 51 52 53 54 mm Inch 1.8 2 5/64 2.2 2.5 3/32 3 4 5/32 5 3/16 6 1/4 6.5 7 7.5 8 5/16 9.53 3/8 Reading direction of the table: from left to right. The marked example shows a reducer joint of a tube joint from ø 8 mm to ø 6 mm. 35 The number refers to the Selection help step 02 with the order parameters.

LOKRING 33 SELECTION AID: Step 02 Select product number and description No. Article no. Article name ø* tube 1 p ø* tube 2 [mm Inch] p [mm Inch] No. Article no. Article name ø* tube 1 p ø* tube 2 [mm Inch] p [mm Inch] 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 L13001290 LOKRING 2,5/2 NR Al 00 2.5 3/32 p 2 5/64 L13002682 LOKRING 3/1,8 NR Al 00 3 p 1.8 L13002832 LOKRING 3/2 NR Al 00 3 p 2 5/64 L13003009 LOKRING 3,2/2 NR Al 00 3.2 p 2 5/64 L13003394 LOKRING 3,5/2 NR Al 00 3.5 p 2 5/64 L13001785 LOKRING 4/2 NR Al 00 4 5/32 p 2 5/64 L13000963 LOKRING 4/2,5 NR Al 00 4 5/32 p 2.5 3/32 L13002432 LOKRING 5/1,8 NR Al 00 5 3/16 p 1.8 L13002357 LOKRING 5/2 NR Al 00 5 3/16 p 2 5/64 L13001114 LOKRING 5/2,2 NR Al 00 5 3/16 p 2.2 L13000962 LOKRING 5/2,5 NR Al 00 5 3/16 p 2.5 3/32 L13000524 LOKRING 5/3 NR Al 00 5 3/16 p 3 L13004373 LOKRING 5,5/3 NR Al 00 5.5 p 3 L13000964 LOKRING 6/2 NR Al 00 6 1/4 p 2 5/64 L13002510 LOKRING 6/2,5 NR Al 00 6 1/4 p 2.5 3/32 L13000527 LOKRING 6/3 NR Al 00 6 1/4 p 3 L13000529 LOKRING 6/4 NR Al 00 6 1/4 p 4 5/32 L13000528 LOKRING 6/5 NR Al 00 6 1/4 p 5 3/16 L13000530 LOKRING 7/2 NR Al 00 7 p 2 5/64 L13001705 LOKRING 7/4 NR Al 00 7 p 4 5/32 L13000531 LOKRING 7/5 NR Al 00 7 p 5 3/16 L13000532 LOKRING 7/6 NR Al 00 7 p 6 1/4 L13003450 LOKRING 7,5/1,8 NR Al 00 7.5 p 1.8 L13000533 LOKRING 7,5/2 NR Al 00 7.5 p 2 5/64 L13000534 LOKRING 7,5/5 NR Al 00 7.5 p 5 3/16 L13000535 LOKRING 7,5/6 NR Al 00 7.5 p 6 1/4 L13000536 LOKRING 7,5/7 NR Al 00 7.5 p 7 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 L13001486 LOKRING 8/1,8 NR Al 00 8 5/16 p 1.8 L13000537 LOKRING 8/2 NR Al 00 8 5/16 p 2 5/64 L13001609 LOKRING 8/2,2 NR Al 00 8 5/16 p 2.2 L13001835 LOKRING 8/2,5 NR Al 00 8 5/16 p 2.5 3/32 L13000538 LOKRING 8/3 NR Al 00 8 5/16 p 3 L13002202 LOKRING 8/4 NR Al 00 8 5/16 p 4 5/32 L13000539 LOKRING 8/5 NR Al 00 8 5/16 p 5 3/16 L13000540 LOKRING 8/6 NR Al 00 8 5/16 p 6 1/4 L13000546 LOKRING 8/6,5 NR Al 00 8 5/16 p 6.5 L13000541 LOKRING 8/7 NR Al 00 8 5/16 p 7 L13000542 LOKRING 8/7,5 NR Al 00 8 5/16 p 7.5 L13001076 LOKRING 8,5/6 NR Al 00 8.5 p 6 1/4 L13001209 LOKRING 8,5/8 NR Al 00 8.5 p 8 5/16 L13001456 LOKRING 9/6 NR Al 00 9 p 6 1/4 L13001457 LOKRING 9/7 NR Al 00 9 p 7 L13000550 LOKRING 9/8 NR Al 00 9 p 8 5/16 L13000551 LOKRING 9,53/2 NR Al 00 9.53 3/8 p 2 5/64 L13000552 LOKRING 9,53/6 NR Al 00 9.53 3/8 p 6 1/4 L13000554 LOKRING 9,53/7 NR Al 00 9.53 3/8 p 7 L13001426 LOKRING 9,53/7,5 NR Al 00 9.53 3/8 p 7.5 L13000553 LOKRING 9,53/8 NR Al 00 9.53 3/8 p 8 5/16 L13002203 LOKRING 10/5 NR Al 00 10 p 5 3/16 L13000557 LOKRING 10/6 NR Al 00 10 p 6 1/4 L13000555 LOKRING 10/7 NR Al 00 10 p 7 L13000556 LOKRING 10/8 NR Al 00 10 p 8 5/16 L13001219 LOKRING 10/9,53 NR Al 00 10 p 9.53 3/8 L13000560 LOKRING 11/9,53 NR Al 00 11 p 9.53 3/8 LOKRING: x NR MS 25 Brass reducer connectors LOKRING Brass 25 reducer connectors* The new technology for cramped installation spaces! The special contour of this LOKRING allows space-saving application of assembly jaws. Thus even shortened tube ends can be easily lokringed to the compressor, etc. For connecting copper- and/or steel tubes with variable outside tube diameters. When assembling a 25 connector, make sure to use MB x EVP assembly jaws. * See page 26 for additional information on special assembly versions. Article no. Article name ø* tube 1 p ø* tube 2 [mm Inch] p [mm Inch] L13002951 LOKRING 7/6 NR Ms 25 7 p 6 1/4 L13002952 LOKRING 7,5/6 NR Ms 25 7.5 p 6 1/4 L13005412 LOKRING 8/5 NR Ms 25 8 p 5 3/16 L13002953 LOKRING 8/6 NR Ms 25 8 5/16 p 6 1/4 L13005413 LOKRING 8,5/5 NR Ms 25 8.5 p 5 3/16 L13002954 LOKRING 8,5/6 NR Ms 25 8.5 p 6 1/4 L13005414 LOKRING 8,5/8 NR Ms 25 8.5 p 8 5/16 L13005415 LOKRING 9,53/5 NR Ms 25 9.53 p 5 3/16 L13005320 LOKRING 9,53/6 NR Ms 25 9.53 3/8 p 6 1/4 L13005374 LOKRING 9,53/8 NR Ms 25 9.53 3/8 p 8 5/16 L13004122 LOKRING 11/8 NR Ms 25 11 p 8 5/16 L13004123 LOKRING 12/10 NR Ms 25 12 p 10

34 LOKRING Reducer and elbow reducer connectors SPACE-SAVING FOR CORNERS LOKRING: x NR MS SV 00 Brass reducer connectors with Schrader valve LOKRING Brass 00 reducer connectors with Schrader valve* For connecting copper- and/or steel tubes with variable outside tube diameters. A 1/4 SAE Schrader valve connection allows for fast and convenient service. * See page 26 for additional information on special assembly versions. Article no. Article name ø* tube 1 p ø* tube 2 [mm Inch] p [mm Inch] L13000785 LOKRING 4/2 NR Ms SV 00 4 5/32 p 2 5/64 L13000786 LOKRING 6/5 NR Ms SV 00 6 1/4 p 5 3/16 L13000791 LOKRING 8/2,2 NR Ms SV 00 8 5/16 p 2.2 L13000789 LOKRING 8/6 NR Ms SV 00 8 5/16 p 6 1/4 L13000790 LOKRING 8/7,5 NR Ms SV 00 8 5/16 p 7.5 L13000792 LOKRING 9/6 NR Ms SV 00 9 p 6 1/4 L13000793 LOKRING 9/8 NR Ms SV 00 9 p 8 5/16 L13000794 LOKRING 9,53/6 NR Ms SV 00 9.53 3/8 p 6 1/4 L13000795 LOKRING 9,53/8 NR Ms SV 00 9.53 3/8 p 8 5/16 L13000796 LOKRING 10/6 NR Ms SV 00 10 p 6 1/4 L13000797 LOKRING 10/8 NR Ms SV 00 10 p 8 5/16 L13000799 LOKRING 11/8 NR Ms SV 00 11 p 8 5/16 LOKRING: x NWR MS 25 Brass elbow reducer connectors LOKRING Brass 25 elbow reducer connectors* 90 elbow for connecting copper- and/or steel tubes with variable outside tube diameters. When assembling a 25 connector, make sure to use MB x EVP assembly jaws. Article no. Article name ø* tube 1 p ø* tube 2 [mm Inch] p [mm Inch] L13005348 LOKRING 9,53/6 NWR Ms 25 9.53 3/8 p 6 1/4 L13005349 LOKRING 11/8 NWR Ms 25 11 p 8 5/16 L13005350 LOKRING 12,7/10 NWR Ms 25 12.7 1/2 p 10 L13004260 LOKRING 13/8 NWR Ms 25 13 p 8 5/16 L13005017 LOKRING 13/12 NWR Ms 25 13 p 12 * See page 26 for additional information on special assembly versions. LOKRING: x NWR MS 50 Brass elbow reducer connectors LOKRING Brass 25 elbow reducer connectors* 90 elbow for connecting copper- and/or steel tubes with variable outside tube diameters. * See page 26 for additional information on special assembly versions. Article no. Article name ø* tube 1 p ø* tube 2 [mm Inch] p [mm Inch] L13002851 LOKRING 8/5 NWR Ms 50 8 5/16 p 5 3/16 L13004639 LOKRING 8/6 NWR Ms 50 8 5/16 p 6 L13004640 LOKRING 9,53/6 NWR Ms 50 9.53 3/8 p 6 L13004783 LOKRING 9,53/6,35 NWR Ms 50 9.53 3/8 p 6.35 1/4 L13001672 LOKRING 9,53/8 NWR Ms 50 9.53 3/8 p 8 5/16 L13003369 LOKRING 10/9,53 NWR Ms 50 10 p 9.35 3/8

LOKRING 35 T-REDUCER Connectors REFINED AND SIMPLE LOKRING: x NtR Ms 00 Brass T-elbow reducer connectors LOKRING Brass 00 T-reducer connectors* For insertion of the capillary tube into the suction line. Connect copper- and/or steel tubes with variable outside tube diameters. * See page 26 for additional information on special assembly versions. Article no. Article name ø* tube 1 ø* tube 2 ø* tube 3 [mm Inch] p [mm Inch] p [mm Inch] L13002522 LOKRING 6/5/2 NTR Ms 00 6 1/4 5 3/16 2 5/64 L13000745 LOKRING 6/6/2 NTR Ms 00 6 1/4 6 1/4 2 5/64 L13002461 LOKRING 6/6/2,2 NTR Ms 00 6 1/4 6 1/4 2.2 L13000747 LOKRING 6,5/6/2 NTR Ms 00 6.5 6 1/4 2 5/64 L13000748 LOKRING 7/6/2 NTR Ms 00 7 6 1/4 2 5/64 L13001592 LOKRING 7/6/2,2 NTR Ms 00 7 6 1/4 2.2 L13000750 LOKRING 7,5/6/2 NTR Ms 00 7.5 6 1/4 2 5/64 L13000754 LOKRING 8/6/1,6 NTR Ms 00 8 5/16 6 1/4 1.6 1/16 L13000751 LOKRING 8/6/2 NTR Ms 00 8 5/16 6 1/4 2 5/64 L13000755 LOKRING 8/6/2,2 NTR Ms 00 8 5/16 6 1/4 2.2 L13000752 LOKRING 8/8/1,6 NTR Ms 00 8 5/16 8 5/16 1.6 1/16 L13000756 LOKRING 8/8/2 NTR Ms 00 8 5/16 8 5/16 2 5/64 L13000758 LOKRING 8,5/6/2 NTR Ms 00 8.5 6 1/4 2 5/64 L13000759 LOKRING 9/6/2 NTR Ms 00 9 6 1/4 2 5/64 L13000762 LOKRING 10/6/2 NTR Ms 00 10 6 1/4 2 5/64 LOKTOOL: NTR-x Assembly fitting LOKRING 00 NTR fitting* The NTR fitting allows for assembly of the T-branch of a 00 T-connector or 00 T-reducer connector. For assembly, the fitting is easily inserted in the assembly jaw. Article no. Article name Description L13000864 LOKtool NTR-8 Assembly fitting * Other sizes available by request.

36 LOKRING stopper and REDUCING ADAPTER Simply ingenious LOKRING: x VS MS 00 Stoppers LOKRING 00 stoppers* For hermetic sealing of tube ends. Simply place on the tube end and press with our manual assembly tool. * Other sizes available by request. Article no. Article name Tube outer ø* [mm Inch] L13004805 LOKRING 3 VS Ms 00 3 L13003367 LOKRING 4 VS Ms 00 4 5/32 L13000765 LOKRING 5 VS Ms 00 5 3/16 L13000766 LOKRING 6 VS Ms 00 6 1/4 L13000767 LOKRING 7 VS Ms 00 7 L13000768 LOKRING 7,5 VS Ms 00 7.5 L13000769 LOKRING 8 VS Ms 00 8 5/16 L13001218 LOKRING 8,5 VS Ms 00 8.5 L13000771 LOKRING 9,53 VS Ms 00 9.53 3/8 L13000772 LOKRING 10 VS Ms 00 10 L13000773 LOKRING 11 VS Ms 00 11 L13000774 LOKRING 12 VS Ms 00 12 L13002684 LOKRING 12,7 VS Ms 00 12.7 1/2 LOKRED: NRA MS 50 Reducing adapter new LOKRED size 50 reducing adapter The new innovative development that can be combined with size 50 brass connection from a diameter of 6mm. Article no. Article name ø* tube 1 p ø* tube 2 [mm Inch] p [mm Inch] L13005049 LOKred 8/6 NRA Ms 50 8 5/16 p 6 1/4 L13005053 LOKred 9,53/6,35 NRA Ms 50 9.53 3/8 p 6.35 L13005050 LOKred 10/6 NRA Ms 50 10 p 6 1/4 L13005055 LOKred 10/8 NRA Ms 50 10 p 8 5/16 L13005051 LOKred 12/6 NRA Ms 50 12 p 6 1/4 L13005056 LOKred 12/8 NRA Ms 50 12 p 8 5/16 L13005061 LOKred 12/10 NRA Ms 50 12 p 10 L13005054 LOKred 12,7/6,35 NRA Ms 50 12.7 1/2 p 6.35

LOKRING 37 LOW PRESSURE CONNECTION connector COMPRESSOR-STOPPER EXTENSION LOKRING: x NAV NAV connection LOKRING NAV connection If the compressor connection is shorter than 20 mm, you can easily extend these with our NAV connection for further LOKRING repairs. In addition, you only need the NAV assembly tool and the appropriate NAV assembly fitting. Article no. Article name Tube outer ø* [mm Inch] L13001593 LOKRING 5 NAV connection 5 3/16 L13000817 LOKRING 6 NAV connection 6 1/4 L13000818 LOKRING 7 NAV connection 7 L13000819 LOKRING 7,5 NAV connection 7.5 L13000820 LOKRING 8 NAV connection 8 5/16 L13000822 LOKRING 8,5 NAV connection 8.5 L13000929 LOKRING 9 NAV connection 9 L13000926 LOKRING 9,53 NAV connection 9.53 3/8 L13000927 LOKRING 10 NAV connection 10 L13000928 LOKRING 11 NAV connection 11 LOKRING: NAV 11 NAV assembly tool LOKRING NAV assembly tool Basic tool for assembly of LOKRING NAV connections Article no. Article name Description L13000919 LOKRING NAV Assembly tool Assembly tool LOKRING: NAV x FITTING NAV assembly fitting LOKRING NAV assembly fitting Assembly fitting for the NAV 11 assembly tool for assembly of LOKRING NAV connections Article no. Article name Description L13001594 LOKRING NAV 5 fitting Assembly fitting L13000914 LOKRING NAV 6 fitting Assembly fitting L13000915 LOKRING NAV 8/7 fitting Assembly fitting L13000916 LOKRING NAV 8,5 fitting Assembly fitting L13000917 LOKRING NAV 9,53 fitting Assembly fitting L13000918 LOKRING NAV 10 fitting Assembly fitting

38 LOKRING DRIER FOR CLEAN CIRCULATION LOKRING: DR x Filter driers LOKRING Filter drier Moisture, acids, and dirt particles are collected by the drier and this protects the circulation of refrigerants. See page 26-35 for the suitable LOKRING tube connectors. Article no. Article name ø inlet ø outlet Drying agent XH-9 Total length Diameter L14000128 LOKRING DR 10 5 mm 5 mm 10 g 200 mm 19 mm L14000377 LOKRING DR 20 5 mm 5 mm 20 g 218 mm 24 mm LOKRING: DR x-2e Filter driers with two inlets LOKRING Filter drier with two inlets Moisture, acids, and dirt particles are collected by the drier and this protects the circulation of refrigerants. See page 26-35 for the suitable LOKRING tube connectors. Article no. Article name ø inlet ø outlet Drying agent XH-9 Total length Diameter L14000636 LOKRING DR 10-2E 6/5 mm 5 mm 10 g 245 mm 19 mm L14000611 LOKRING DR 15-2E 6/6 mm 5 mm 15 g 255 mm 25 mm LOKRING: DRs x Filter driers with Schrader valve LOKRING Filter drier with Schrader valve Moisture, acids, and dirt particles are collected by the drier and this protects the circulation of refrigerants. See page 26-35 for the suitable LOKRING tube connectors. Article no. Article name ø inlet ø outlet Drying agent XH-9 Total length Diameter L14000122 LOKRING DRS 10 5 mm 5 mm 10 g 245 mm 19 mm L14002319 LOKRING DRS 11 5 mm 5 mm 11 g 245 mm 19 mm L14000118 LOKRING DRS 15 6 mm 5 mm 15 g 230 mm 25 mm L14004145 LOKRING DRS 20 5 mm 6 mm 20 g 234 mm 24 mm

LOKRING 39 LOKRING: DRF 032 Filter drier * LOKRING filter drier Humidity, acids and dirt particles are trapped by the drier, thus protecting the refrigerant circuit. The suitable LOKRING tube connections can be found on pages 26 35. Article no. Article name ø inlet ø outlet Drying agent Total length Diameter L14000372 LOKRING DRF 032 6 mm 6 mm XH-9 163 mm 58.5 mm * Illustration similar LOKRING: DRF xxx Solids driers LOKRING solids drier Humidity, acids and dirt particles are trapped by the drier, thus protecting the refrigerant circuit. The suitable LOKRING tube connections can be found on pages 26 35. Article no. Article name ø inlet ø outlet Drying agent Total length Diameter L14004149 Solids drier DRF 10x35 10 mm 10 mm XH-9 167 mm 57.5 mm L14004150 Solids drier DRF 6x35 6 mm 6 mm XH-9 165 mm 57.5 mm

40 LOKRING CHARGING TUBES SAFE ACCESS TO THE SYSTEM LOKRING: 6 NF Ms SV Charging tube with Schrader valve LOKRING charging tube with Schrader valve Our charging tubes guarantee optimal dimension tolerances for the LOKRING fitting. Article no. Article name Description Material Tube external ø Total length Wall thickness Working pressure Temperature range L14000143 LOKRING 6 NF Ms SV nat. gases Charging tube Cu-Rohr 6 mm approx. 100 mm 0.7 mm 0 30 bar 30 C to +150 C L14000139 LOKRING 6 NF Ms SV 01 Charging tube Cu-Rohr 6 mm approx. 330 mm 0.7 mm 0 30 bar 30 C to +150 C L14004037 LOKRING 6 NF Ms SV inorg. gases Charging tube Cu-Rohr 6 mm approx. 100 mm 0.7 mm 0-- 30 bar 30 C to +150 C LOKRING: 6 NF Ms 00 Charging tube LOKRING charging tube Our charging tubes guarantee optimal dimension tolerances for the LOKRING fitting. Article no. Article name Description L14000609 LOKRING 6 NF Ms 00 Charging tube Technical data Material: Tube external diameter: Total length: Tube wall thickness: Cu-Rohr 6 mm approx. 150 mm 1.0 mm

LOKRING 41 COPPER- AND CAPILLARY TubeS CONNECT FITTING PARTS EASILY Loktube: CuR-xXx/x Copper tube LOKTUBE copper tube* Our copper tubes are made by select European and ISO 9001 : 2000-certified quality vendors. Here you benefit from acid-free copper piping specially designed for refrigeration and climatic technology that meets the requirements laid out in EU standard EN 12735-1. Our LOKTUBE guarantees optimal dimension tolerances for the LOKRING fitting. Article no. Article name Description L14000363 LOKtube CuR 5x0,75/15,24m Copper tube L14000364 LOKtube CuR 6x0,7/15m Copper tube L14002721 LOKtube CuR 7,94x0,7/15,24m Copper tube L13005376 LOKtube CuR 8x1mm/5m Copper tube L14000557 LOKtube CuR 10x1/15,24m Copper tube L14000558 LOKtube CuR 12x0,9/15,24m Copper tube * Other sizes available by request. LOktube: CuR-2X0,7/15M Capillary tube LOKTUBE capillary tube Oxygen-free, passage-certified capillary tube in refrigeration quality. Seamless, bright, and thoroughly dried with closed ends. Our LOKTUBE guarantees optimal dimension tolerances for the LOKRING fitting. Article no. Article name Description L14000194 LOKtube CuR-2x0,7/15m Capillary tube

42 LOKRING Tube cutter CUTTING TUBES EASILY AND CLEANLY LOKTOOL: TC4-28 Spring-loaded tube cutter LOKtool Spring-loaded tube cutter Tube cutter with automatic adaptation for the straightforward cutting of round tubes with an outer diameter of 4 to 28 mm. The spring tension can be adjusted for different tube thicknesses from 0.5 to 1.5 mm. Readjustment of cutting depth as necessary with standard tube cutters is not required. Article no. Article name Description L14004103 LOKtool TC4-28 Spring-loaded tube cutter LOKTOOL: TC3-28 Tube cutter LOKtool tube cutter New and professional tube cutter using roller bearing technology, which makes quick and easy tube cutting possible. Diameter range: 3 mm to 28 mm. Article no. Article name Description L14003600 LOKtool TC3-28 Tube cutter L14003603 LOKtool CW3-28 Cutting blade for TC3-28 LOKTOOL: TC-1050 Tube cutter LOKtool tube cutter For the clean cutting of aluminium, copper and thinwalled steel tubes with an outer diameter of 4 mm to 15 mm. Article no. Article name Description L14001102 LOKtool TC-1050 Tube cutter L14001103 LOKtool TCS-1050 Cutting blade for TC-1050 LOKTOOL: RC375 Ratchet tube cutter LOKtool ratchet tube cutter Extremely compact design ratchet tube cutter for the clean cutting of aluminium, copper and thin-walled steel tubes with an outer diameter of 4 mm to 13 mm. Article no. Article name Description L14000258 LOKtool RC375 Ratchet tube cutter L14002063 LOKtool RCS-375 Cutting blade for RC375

LOKRING 43 Tube cutter AND PINCH-OFF TOOLS SIMPLE OPENING OR DISCONNECTION OF TUBES LOKTOOL: RC1125 Ratchet tube cutter LOKtool ratchet tube cutter High-quality ratchet tube cutter for the clean cutting of aluminium, copper and thin-walled steel tubes with an outer diameter of 8 mm to 28.5 mm. Article no. Article name Description L14002051 LOKtool RC1125 Ratchet tube cutter L14002075 LOKtool RCS-1125 Cutting blade for RC1125 LOKTOOL: CTP-1 Capillary tube cutting tool LOKtool capillary tube cutting tool CTP-1 For clean separation of capillary tubes without reduction in internal diameter. Suitable for all capillary tube diameters. Article no. Article name Description L14000005 LOKtool CTP-1 Capillary tube cutting tool LOKTOOL: LRSZ Tube cutting pliers EXCLUSIVELY BY LOKtool Tube cutting pliers For the clean cutting of aluminium, copper and steel tubes with a wallthickness of 1 mm and an outer diameter of 4 mm to 16 mm. A movement through 120 is sufficient for cutting. Clean, perpendicular cuts are produced. Particularly helpful in cramped fitting situations! Article no. Article name Description L14000166 LOKtool LRSZ Tube cutting pliers L13001304 LOKtool LRSM Cutting blade for LRSZ LOKTOOL: ABZ-008 Pinch-off tool LOKtool pinch-off tool ABZ-008 For pinching off charging tubes without Schrader valve up to an external tube diameter of 10mm (3/8 ). Article no. Article name Description L14000201 LOKtool ABZ-008 Pinch-off tool

44 LOKRING Piercing pliers FOR A CONTROLLED CIRCULATION PORT LOKtool: AZ-027 Piercing pliers LOKtool piercing pliers AZ-027 For extraction of refrigerant from defective, still-pressurized refrigeration cycles on the drier. Hose connection: 1/4 SAE Article no. Article name Description L14000202 LOKtool AZ-027 Piercing pliers LOKbox: AZ-027 Piercing pliers toolset LOKBOX piercing pliers AZ-027 For extraction of refrigerant from defective, still-pressurized refrigeration cycles. For driers and for copper tubes with an external diameter of 6, 8 and 10 mm (1/4,5/16 and 3/8 ). Hose connection: 1/4 SAE Scope of supply Piercing pliers Spare insert Spare seal Seal for insert Spare 1/4 Spare 5/16 Spare 3/8 Article no. Article name Description L13001976 LOKbox AZ-027K LOKbox Werkzeugset Available separately L14000211 LOKplus AZ-027A Spare insert L14000212 LOKplus AZ-027B Spare seal L14000370 LOKplus AZ-027C Seal for insert L14000651 LOKplus 1/4" AZ-027D Spare 1/4 L14000654 LOKplus 5/16" AZ-027E Spare 5/16" L14000655 LOKplus 3/8" AZ-027F Spare 3/8" L13002439 LOKplus AZ-027G Complete Set of inserts

LOKRING 45 Piercing pliers FOR A CONTROLLED CIRCULATION PORT LOKtool: EZ-LC Piercing pliers LOKtool EZ-LC piercing pliers For the extraction of refrigerant from faulty refrigerant circuits that are still under pressure. For copper tubes with an external diameter of 6 mm (1/4 ). Hose connection: 1/4 SAE Article no. Article name Description L13004882 LOKtool EZ-LC Piercing pliers L14003018 LOKplus EZ-LC-E Piercing pin L14003019 LOKplus EZ-LC-D Spare seal LOKplus: x Tube piercing valves LOKPLUS Tube piercing valves Allows connection for charging or evacuation of a system without a charging tube. Article no. Article name Description For tube external diameter L14000109 LOKplus A-3 Tube piercing valve 5 mm 3/16"; 6 mm 1/4" L14000080 LOKplus A-1 Tube piercing valve 6 mm 1/4"; 8 mm 5/16"; 10 mm 3/8" L14001027 LOKplus BPV31 Tube piercing valve 6 mm 1/4"; 8 mm 5/16"; 10 mm 3/8" L14001028 LOKplus BPV21 Tube piercing valve 12,7 mm 1/2"; 16 mm 5/8"

46 LOKTRACE LOKtrace FIND THE LEAK! LOKTRACE gas, which is a mixture of nitrogen and hydrogen, is filled into the system for leak detection. LOKTRACE gas is non-flammable, non-toxic, non-corrosive and not harmful to the environment. Hydrogen molecules are the smallest naturally occurring particles and escape from minimum leaks. With the help of the LOKTRACER TLD.500 or LOKTRACER TLD.1000 the tiniest leaks can be detected. The leak detectors react almost exclusively to hydrogen with nearly no cross-sensitivities to other gases. FURTHeR ADvANTAGeS OF THe LOKTRACe SYSTem Finds even the tiniest leaks < 1 g/year Finds every leak even through screed, insulation and foam No cross-sensitivities no false alarm possible through external gases Can be carried out immediately quickly, precisely and economically Absolutely standard conform with EN 35 422, EN 14 624 and global standards compliant THe PeRFeCT SOLUTION LOKTRACe GAS The smallest and most volatile of all gases 14 times lighter than air Non-combustible, non-toxic, colourless and odourless Suitable for pressure test Climate-neutral and inexpensive CONCLUSION: LOKTRACE gas finds every single leak! A LOKTRACe COMPARED TO CONVENTIONAL LEAK DETECTION METHODS Finding leaks through insulation Detecting smaller leaks < 1g/year Compliance with legal regulations Reliability Direct implementation Loktrace 3 3 3 3 3 UV dye 7 7 7 3 7 Electronic refrigerant leak detectors 7 7 7 7 3 Vacuum test 7 7 7 3 3 Nitrogen and bubble spray 7 7 3 3 3

LOKTRACE 47 MANUFACTURER S APPROVAL A LOKTRACER TLD.500 LOKTRACER TLD.1000

48 LOKTRACE LOKTRACER TLD.500 TRACE GAS LEAK DETECTION LOKTOOL: LOKTRACER TLD.500 Trace gas leak detector LOKTOOL trace gas leak detector The TLD.500 was developed together with a leading manufacturer of sensor systems. A leak detection method developed for industry has been adapted perfectly for service applications, thus guaranteeing fast, reliable and straightforward leak detection. This turns leak detection from the guessing game experienced with conventional leak detection methods into a safe process. Features Article no. Article name Description L13005099 LOKTRACER TLD.500 Trace gas leak detector Technical data Time until ready < 90 sec. Response time 1 to 2 sec. Operating period approx. 5 hours EXCLUSIVELY BY Integrated LED torch Acoustic and optical alarm No cross-sensitivities to usual external substances Concentration adaptation through zero setting Automatic self-regulation of the sensor Without pumps or filters thanks to diffusion technology LOKBOX: TG-DMSTC-500 SET Trace gas leak detection set * LOKBOX trace gas leak detection set This set contains all you need for leak detection using trace gas, protected in a sturdy plastic case. Scope of supply LOKtracer TLD.500 trace gas leak detector PR-TG.10 W21,8-14 pressure regulator PA-1/LT.10 manifold gauge TGB2 trace gas cylinder 2l* Service hoses Plastic case Article no. Article name Description L13005039 LOKBOX TG-DMSTC-500 Set without trace gas cylinder L13005040 LOKBOX TG-DMSTC-500-2l Set with 2l trace gas cylinder L14004039 LOKPLUS TGR2 Tracer gas refill 2l * The LOKbox TG-DMSTC-500 Set is not equipped with a trace gas cylinder.

LOKTRACE 49 LOKTRACER TLD.1000 TRACE GAS LEAK DETECTION LOKTOOL: LOKTRACER TLD.1000 Trace gas leak detector LOKTOOL trace gas leak detector The TLD.1000 was developed together with a leading manufacturer of sensor systems. A leak detection method developed for industry has been adapted perfectly for service applications, thus guaranteeing fast, reliable and straightforward leak detection. The TLD.1000 has a twin-sensor system combining various leak detection functions. Leaks are identified in search mode and the leak rate is made measurable through a digital display in analysis mode. This turns leak detection from the guessing game experienced with conventional leak detection methods into a safe process. Article no. Article name Description L14002348 LOKTRACER TLD.1000 Tracer gas leak detector Technical data Time until ready < 60 sec. Response time 1-2 sec. Operating period approx. 3 hours EXCLUSIVELY BY Features Sturdy aluminium housing and illuminated LCD display Fast and safe leak detection using the search mode PPM measurement of the leak rate in analysis mode Acoustic and optical alarm No cross-sensitivities to the usual external substances Concentration adaptation through zero setting Automatic self-regulation of the sensor LOKBOX: TG-DMSTC-1000 SET Tracer gas leak detection set * LOKBOX Tracer gas leak detection set This set contains all you need for leak detection using tracer gas, protected in a sturdy plastic case. Scope of supply LOKtracer TLD.1000 PR-TG.10 W21,8-14 pressure reducer PA-1/LT.10 manifold gauge TGB2 tracer gas cylinder 2l* Service hoses Plastic case Article no. Article name Description L13005043 LOKBOX TG-DMSTC-1000 Set without tracer gas cylinder L13005044 LOKBOX TG-DMSTC-1000-2l Set with tracer gas cylinder 2l L14004039 LOKPLUS TGR2 Tracer gas refill 2l * The LOKbox TG-DMSTC-1000 Set is not equipped with a tracer gas cylinder.

50 SERViCE SERVICE WELL INFORMED RATHER THAN WRONGLY CONNECTED WE WILL BE HAPPY TO HELP

SERVICE 51