Sede: Via Antica, 24/ S. Giovanni al Nat. UD Tel r.a. Fax SAMPLE N

Similar documents
Sede: Via Antica, 24/ S. Giovanni al Nat. UD Tel r.a. Fax SAMPLE N

Sede: Via Antica, 24/ S. Giovanni al Nat. UD Tel r.a. Fax

TEST REPORT N

Sede: Via Antica, 24/ S. Giovanni al Nat. UD Tel r.a. Fax SAMPLE N

Sede: Via Antica, 24/ S. Giovanni al Nat. UD Tel r.a. Fax SAMPLE N

TEST REPORT N

Test Report No.: AJD Date: NOV.05, 2013 Page: 1 of 5

Length: 895 mm Width: 1355 mm Height: 705 mm

page 1/6 EN 16139:2013, test severity level 1 The sample submitted for test fulfils the requirements in above mentioned standards.

Contact person Date Reference Page Michael Lindblad F000833F 1 (1) Sustainable Built Environment

page 1/5 EN 16139:2013, test severity level 1

Contact person Date Reference Page Michael Lindblad F025884B 1 (1) Sustainable Built Environment

Contact person Date Reference Page Michael Lindblad F025884A 1 (1) Sustainable Built Environment

Contact person Date Reference Page Michael Lindblad F013838C 1 (1) Sustainable Built Environment

Internrapport

page 1/5 EN 16139:2013, test severity level 1 Manager Kinnarps Test- & verification Center

TEST REPORT FOR: Product Design Group Fuze T50 Manual Wheelchair (204 kg / 450 lb)

Page 1(5) Quality department P.O. Box 22 TEST REPORT 579/16 FIN Nummela Finland

Contact person Date Reference Page Ulf Lemke F015337C 1 (4) Wood Technology

Contact person Date Reference Page Hans Eriksson F000838G 1 (4) Wood Technology

TEST REPORT FOR: Product Design Group Inc. Elevation Manual Wheelchair 115 kg, 253 lb

: Metta Company : FLTSSP _07. : Swiss Approval Furniture Laboratory. : Elefsis, Attica Greece

Contact person Date Reference Page Ulf Lemke F027196A 1 (4) Wood Technology

Outdoor furniture Seating and tables for camping, domestic and contract use

Contact person Date Reference Page Hans Eriksson F000838D 1 (3) Wood Technology

David Fagan, Mobility Manager Paragon Mobility Pty Ltd 3/10 Tapnor Crescent, Brendale, Queensland th December, 2011.

Informal Document N 20 (30th GRSP, 3-6 December 2001, agenda item 1.4) Insert in the "CONTENTS" the headlines of new annexes 10 & 11 to read:

Type: Office work chair Lab.no.: Depth: 650 mm Width: 710 mm Height: 1345 mm Weight: 18,8 kg. EN :2009 and EN :2009.

Type: Office work chair Lab.no.: A. EN :2009 Office furniture - Office work chair - Part 2: Safety requirements.

Liste der verwendeten Prüfmittel List of used test equipment

NovitaTech Engineering

Test Report No.: AJHL FT Date: JUN.02, 2016 Page 1 of 5

Liste der verwendeten Prüfmittel List of used test equipment

A brief guide for identification of non-compliant construction machinery. Is this. Compactor / Roller compliant with European legislation?

ISO (revision) Walking Aids manipulated by both arms Requirements and test methods Part 2: Rollators

ERGOHUMAN ADVANCED ENGINEERING

THE ENERGY EFFICIENCY ACT. Regulations made by the Minister under section 23 of the Energy Efficiency Act

TEST REPORT FOR: Product Design Group Inc. Stellar Tilt Manual Wheelchair to 114kg

For IS: (Part 4): 1987 General requirements for rims for Automotive Vehicles - Part 4 - Scooters and scooter derivative rims

ERGOHUMAN ADVANCED ENGINEERING

TESTING REPORT. ROLLATORS - ISO classification in accordance with the INTERNATIONAL STANDARD ISO :2005. Testing No. 07.

FEDERAL STANDARD PERFORMANCE TEST METHOD FOR INTENSIVE USE CHAIRS

Initial each page: 1

ASSEMBLY TOOLS FOR BOLTS & NUTS. Part 3: Insulated Wrenches

TITLE: SPECIFICATION FOR BENCH VICE & BENCH GRINDER TABLE OF CONTENTS. 0.1 Circulation List. 0.2 Amendment Record

Tubular frames for piping group III (further as frames) are used to secure HVAC piping into walls and partitions.

E/ECE/324/Rev.1/Add.57/Rev.3 E/ECE/TRANS/505/Rev.1/Add.57/Rev.3

Möbler Stolar och bord för skol- och utbildningsmiljö Del 2: Säkerhetskrav och provningsmetoder

Hydraulic fluid power Cylinders Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications

8 (800) (звонок бесплатный) Length tolerances for shafts to DIN 7168, medium series.

VRETA. Year Limited Warranty INCLUDED

Collective amendments to UN Regulations Nos. 16, 44, 94, 129 and 137

Test Report No: EEC18/01 dated August 02, 2018

94, 129 and 137. Submitted. Commission. Figure 1 Warning label. mm or the. to the aforementioned, above. In derogation. equivalent area.

Economic and Social Council

Gruppo Desa S.P.A. Particulars. RSPO Annual Communications of Progress Particulars Form Submit date: 04-May :32 GMT Page 1/1

Evidence of Performance Burglar resistance

Task Seating. Technical Document. Full statement of line including model codes, up charges and standards.

STIGA PARK 4 WD 107 M 107 M HD 121 M. 125 Combi Pro B INSTRUCTIONS FOR USE. »HC P K»fl œoà «Œ EÀfl

013 : 2009 CEB SPECIFICATION MOULDED CASE CIRCUIT BREAKERS

Test specification : EN71 - Part1: Mechanical and Physical Properties Excluding Clause 7.1 Excluding Labeling Requirement of Clause

Common position by FR and CEMA on mechanical couplings for towed vehicles 28/9/2015

12-SDMS-02 REV. 05 ( )

SYLLABUS. EASA 748/2012 Part-21 SUBPART F/G POA - ADVANCED (FLY Course code: 004-C-P) Issue of FLY EN

Electric Vehicle Charging Safety Guidelines Part 2: Selection and Installation Edition DRAFT

UPN. Rod and piston seal with energizing element UPN

Multi Bari. Key features at a glance: Additional options:

Z from: 1 November 2016

Test Report No.: SDHL FT Date: May 15, 2017 Page 1 of 15

S&C Series 2000 Circuit Switchers Outdoor Transmission (69 kv through 230 kv)

INSTALLATION INSTRUCTIONS

Madison. Key features at a glance: Additional options:

34-SDMS-01 SPECIFICATIONS FOR

Page 2 of 6. Summary of testing The clause 17 and clause 29 are considered and check on the appliance.

Caring for Your Manual Wheelchair

Burton's Foods Ltd. Particulars. RSPO Annual Communications of Progress Particulars Form Submit date: 28-Mar :21 GMT Page 1/1

THERMOMETER SPECIFICATIONS

ROLLER SHADE SPECIFICATIONS

Series 1 shaft seal installation instructions

Presented Exclusively By: So Comfortable You ll Feel The Difference The Moment You Sit Down!

Wheelchairs: Manual or Power Operated. and Power Operated Vehicles (POV)/Scooters MP9111

Static O-Ring Reference

REPORT NO INSPECTION, TEST AND EVALUATION OF. Interlock Kits SUBMITTED TO MASTER ELECTRICAL SERVICES 3107 LANVALE AVENUE RICHMOND, VA 23230

Test Report No.: SDHL FT Date: Jun.15, 2017 Page 1 of 5

REPORT. Lab Number: (5105) Page 1 of 1. Index

Domestic Driving Permits & International Driving Permits

Draft amendments for ECE/TRANS/WP.29/GRSG/2015/27

Power Lift & Recline Chair and Power Recline Only Chair

ENGLISH ROLL ARM COLLECTION

Proposal for the 09 series of amendments to Regulation No. 17

Best Bar Service nyc RENTALS

E/ECE/324/Rev.2/Add.112/Rev.3/Amend.6 E/ECE/TRANS/505/Rev.2/Add.112/Rev.3/Amend.6

NPS/001/017 Technical Specification for Low Voltage and High Voltage Current Limiting Fuse Links

Domestic furniture - Seating - Determination of stability. Bostadsmöbler - Bedömning av stabilitet för sittmöbler

visio overview work chairs Statement of Line Visio, a fully featured mesh Task Chair with multiple options at a mid-range price point.

Tohoku ESIA. Hokuriku ESIA. Shikoku ESIA

SFI SPECIFICATION 35.1 EFFECTIVE: AUGUST 26, 2008 *

Linear Way F. Linear Way F series. Linear Way F LWFF LWFH. Interchangeable. Wide structure. Flange type and block type.

Proposal for 10 series of amendments to Regulation No. 17 (Strength of seat)

Overhead transmission lines Tension clamp

Transcription:

Report consists of 9 test reports. ARDI S.P.A. VIA ARSO 4 36072 CHIAMPO (VI) Defects before testing: one Sample name: OMEGA SAMPLE 194871 Overall dimensions: 690 x 1700 x 900 (h) mm List performed tests: 1. Outdoor furniture - General safety requirements E 581-1:2006 2. Instruction for use E 581-2:2009, clause 7 3. Loungers- seat and back static load test E 581-2:2009, clause B.2.1.1 4. Loungers: seat and back static load test - reclining back rest E 581-2:2009 5. Loungers. Seat fatigue test E 581-2:2009, clause B.2.1.2 6. Loungers. Seat and back fatigue test. Reclining back rest E 581-2:2009 7. Loungers. Multi-position back rest: fatigue test E 581-2:2009, clause B. 2.1.3 8. Loungers. Seat impact test E 581-2:2009, clause B.2.1.6 9. Loungers. Stability E 581-2:2009, clause B.3 Page 1 of 2

Sample weight: ot determined Sample name: OMEGA SAMPLE 194871 Side view Rear view Bottom view report relates to the sample submitted for the test and no others. Additions, deletions or alterations are not permitted. This test report must always be Page 2 of 2

194871 / 1 Date of test: 24/04/15 ARDI S.P.A.! Outdoor furniture - General safety requirements E 581-1:2006 5.1 Edges and corners of parts which are directly contactable: Requirement Observed Edges and corners rounded and chamfered Yes one 5.1 Edges and corners of accessible parts: Requirement Observed Absence of sharp edges and burrs Yes one 5.2 Tubulars, holes and gaps accessible during use: Requirement Capped holes and gaps if dimensions are 7 and" 12 mm with depth 10 mm tested with probe" as specif. at point 4, applying 30 force Observed Yes one Bottom of tubulars capped or plugged Yes one 5.3 Shear and squeeze points: Requirement Absence of shear and squeeze points," created by powered mechanisms Observed Mechanism not" present one Absence of shear and squeeze points," created by loads during normal use Yes one Conformity to clause 5 of standard E 581-1:2006: YES

194871 / 2 Date of test: 15/05/15 ARDI S.P.A.! Instruction for use E 581-2:2009, clause 7 Instructions for use E 581-2:2009, clause 7 General, clause 7.1 Statement checked Shall be provided in the language of the country where the! chairs are sold. Shall be headed "IMPORTAT, RETAI FOR FUTURE! REFERECE: READ CAREFULLY" in letters no less than! 5 mm high. Italian language Present This instructions shall include at least the following: Statement checked a) ame and address of the producer (manufacturer or supplier). Present b) Information regarding maintenance. Present! c) Conditions for use of the product (camping, domestic or contract) Present Marking for mobile loungers, clause 7.2 Statement checked All mobile loungers not intended to be lifted and moved under! load shall be marked with a pictogram. Present Conformity to clause 7 of standard of E 581-2:2009: YES

194871 / 3 Date of test: 24/04/15 ARDI S.P.A.! Loungers- seat and back static load test E 581-2:2009, clause B.2.1.1 Seat and back static load test clause B.2.1.1 of E 581-2:2009 Points of application: FB1, D, E Load on! FB1! Back! Load on! FB2! umber of! cycles Time of! application 2.000 560 900 10 10 sec o defects 2.000 560 900 1 30 min o defects

194871 / 4 Date of test: 24/04/15 ARDI S.P.A.! Loungers: seat and back static load test - reclining back rest E 581-2:2009 Seat and back static load test, clause B.2.1.1 of E 581-2:2009 Back rest incliantion: 18 Points of application: FB1, D, E Load on! FB1! Back rest! Load on! FB2! umber of! cycles Time of! application 1.500 1.430 900 10 10 sec o defetcs 1.500 1.430 900 1 30 min o defects

194871 / 5 Date of test: 24/04/15 ARDI S.P.A.! Loungers. Seat fatigue test E 581-2:2009, clause B.2.1.2 Seat and back fatigue test E 581-2:2009, clause B.2.1.2 Seat fatigue test E 581-2:2009, clause B.2.1.2.1 Vertical! umber of! cycles! per point 1.000 25.000 o defects Total cycles: 50.000

194871 / 6 Date of test: 27/04/15 ARDI S.P.A.! Loungers. Seat and back fatigue test. Reclining back rest E 581-2:2009 Seat and back fatigue test E 581-2:2009, clause B.2.1.2.2 Test method: E 1728:2000, clause 6.9 Bending moment applied to the back: 100 m Back rest inclination: 18 Seat! Back! Back rest! position umber of! cycles 1.000 330 Vertical 25.000 o defects 750 710 Reclining 25.000 o defects Total cycles: 50.000

194871 / 7 Date of test: 06/05/15 ARDI S.P.A.! Loungers. Multi-position back rest: fatigue test E 581-2:2009, clause B.2.1.3 Multi-position back rest: fatigue test, clause B.2.1.3 Bending moment applied to the back: 100 m Mass on! the seat! kg Back! umber of! cycles 100 330 20.000 on defetcs

194871 / 8 Date of test: 13/05/15 ARDI S.P.A.! Loungers. Seat impact test E 581-2:2009, clause B.2.1.6 Seat impact test E 581-2:2009, clause B.2.1.6 Test method: E 1728:2000, clause 6.15 Mass of! impact! kg Height! of drop! mm umber of! impacts! per point 25 180 10 o defects

194871 / 9 Date of test: 28/05/15 ARDI S.P.A.! Loungers. Stability E 581-2:2009, clause B.3 Stabiliy E 581:2009, clause B.3 Sideways stability, clause B.3.1.1 Loungers with arm rests: Force in Fb4: Force in Fb5: Time of application: 600 250 5 sec : / Loungers without arm rests: Force in Fb4: 600 Time of application: 5 sec : The lounger does not overbalance Forward stability, clause B.3.1.2 Force in Fb6: Time of application: 600 30 sec : The lounger does not overbalance