Test Report No: EEC18/01 dated August 02, 2018
|
|
- Clement Lawson
- 5 years ago
- Views:
Transcription
1 Note: This report is issued subject to the Testing and Certification Regulations of the TÜV SÜD Group and the General Terms and Conditions of Business of TÜV SÜD PSB Pte Ltd. In addition, this report is governed by the terms set out within this report. Date Received : 17/07/2018 Test Period : 17/07/ /08/2018 Sample Description : 29 INCH BAR STOOL Color : ESPRESSO/BLACK WINTER GRAY/BLACK Buyer : / Product Type/ End Use : / Model/Style No. : Country Of Origin : MALAYSIA Country Of Destination : USA SKU No.: : / Manufacturer : Laboratory: TÜV SÜD PSB Pte. Ltd. No.1 Science Park Drive Singapore Phone : Fax : enquiries@tuv-sud-psb.sg Co. Reg : R Regional Head Office: TÜV SÜD Asia Pacific Pte. Ltd. 1 Science Park Drive, #02-01 Singapore Page 1 of 8
2 SAMPLE PHOTO Page 2 of 8
3 SUMMARY OF TEST RESULTS TEST REQUESTED TOTAL LEAD CONTENT IN SURFACE COATING EPA TSCA TITLE VI COMPOSITE WOOD HEAVY METAL IN PACKAGING FLAMMABILITY OF SOLID SHARP POINT AND SHARP EDGES WORKMANSHIP LEG STRENGTH BACKREST STRENGTH SEAT STATIC LOAD SEAT IMPACT FRONT STABILITY REAR STABILITY CONCLUSION For any concern or technical Inquiries, please contact SUZEN CHONG VICE PRESIDENT ASEAN SOFTLINE & HARDLINE Tel: PERFORMED BY: APPROVED BY: WONG KOK LEONG TEAM LEADER KOO CHIEH VOON HARDLINE PRODUCT MANAGER Page 3 of 8
4 TEST RESULT(S): Clause Method Criteria Result Rating Total lead in surface coating 16 CFR 1303/Consum er Product Safety Improvement Act of 2008 / CPSC-CH- E All accessible surface coatings in the assembled state on adult furniture [exempt factory applied coatings on metal components/parts] and household paint shall not contain lead or lead components in which the lead content is in exceed of 0.009% (90ppm) of the weight of the total content. In case of insufficient coating for testing found on number of samples specified in the protocol, vendor needs to provide dipped parts or components/parts for testing. Report actual results or include data table within report. Issue a program audit report. Component testing is allowed. Based on CPSC SOP, will composite up to 3 colors. If any color in the composite exceeds 80% of the limit (72 ppm), based on the lowest weight component, individual colors will be analyzed. (See Result in Page 7) Page 4 of 8
5 Clause Method Criteria Result Rating EPA TSCA Title VI Composite Wood 40 CFR (c) / 40 CFR (e) Finished goods containing regulated composite wood shall comply with the labeling requirements found in 40 CFR (c) unless the finished good qualities for the de minimis exception found in 40 CFR (e). A finished good does not require labeling per 40 CFR (c) if the finished good does qualiy for the de minimis excepting in 40 CFR (e). If the finished good does qualify for the de minimis exception, result is N/A. A finished good does require labeling 40 CFR (c) if the finished good does not qualify for the de minimis exception in 40 CFR (e). - At a minimum, the label must be on the product or the packaging - The label may be applied as a stamp, tag or sticker - The label shall include a minimum in legible English text: 1. Fabricator s name 2. Date the finished good was produced (in month/year) 3. A statement of compliance to denote that the finished good complied with TSCA Title VI Heavy metal in packaging Flammability of solid Sharp point and sharp edge Model Toxics in Packaging Legislation of the Toxics in Packaging Clearinghouse (TPCH) 16 CFR (c)(6)(v i) / 16 CFR CFR & 49 Example: XXX Company MM/YYYY EPA TSCA Title VI compliant for Formaldehyde Or California Phase 2 Compliant for Formaldehyde (until 22 March 2019) The sum of concentration levels of lead, cadmium, mercury and hexavalent chromium in packaging or packaging components shall not exceed 100 mg/kg (100 ppm) by weight. In lieu of testing, test report can be submitted if dated within One year. Shall not exceed the maximum allowable limit of no greater than 0.1 inches per second. Shall have no sharp points / edges, other than those required for function. Modification: Expanded scope to other products. (Mod) Workmanship Visual Shall have no discernible surface degradation, including crazing, shivering, denting, bubbles, cracks, stains, deformations, chips, fractures, heavy lines, waves, shear marks, scratches, scuff marks, indentations, or blisters.shall have no components missing, malformed, and/or fractured. (COC Provided) (Did not ignite) Page 5 of 8
6 Clause Method Criteria Result Rating Leg strength In-house No structural failure at the test load 75 lbf applied vertically to the leg at 1 in from the end of the leg for 1 minute. Force is applied in the front inward, side inward & back inward. Backrest In-house No failure at 150 lb. (non - tilt) and 200 lb. (tilt) for 1 strength test min. applied to 90 from back at 16 in. above the seat Seat static load In-house Apply a test load to seating area for 1 minute. Outdoor sample 400 lb Indoor sample 300 lb If the sample has more than one seating area, Two seating areas Simultaneously test on both seating areas Three seating areas Simultaneously test on one end seating area and the center seating area Four seating areas or more Simultaneously test on two adjacent seating areas followed by two adjacent center seating area Shall not have any permanent deformation larger than 1/4 in., loss of functionality or structural failure Seating impact In-house Shall have no structural breakage or greater than 1/2 in. permanent deformation after a free fall drop of a test load of 225 lb. to center of seating area with nontested seating areas loaded with 400 lb of static load. Dynamic loading shall be conducted on one point or consecutively; - on one seating area for one or two seaters - on one end seating area and the center area for three seaters. - on one end seating area and the center pair of seating area of four or more seaters. Front stability In-house The chair is obstructed by 1 In. bar in the front base, tipping force is measured in the 45 to the test platform. The tipping force shall not be less than 40% of the total chair weight. Rear stability In-house The chair shall not tip over when chair is loaded with 6 or 13 disks depending on type of chair. Apply a horizontal force to the highest disk.the location of the force application is 6 mm (0.25 in.) from the top of the disk. For chairs with seat height < 710 mm (28.0 in.), calculate the force as follows: F = (1195 H) Newton. H is the seat height in mm. [F = 1.1 (47 H) pounds force.]. H is the seat height in inches. For chairs with seat height equal to or greater than 710 mm (28.0 in.), a fixed force of 93 N (20.9 lbf.) shall be applied. (150 lbs load) (300 lbs load) Weight: 19.4 lbs Tipping force: 9.9 lbs Seat height: 30 3 /16 Force applied: 93N Page 6 of 8
7 TEST RESULT(S): (Continued) Total Lead Content in Surface Coating United States Consumer Product Safety Improvement Act (CPSIA), Section 101(a)(2) Test Method : CPSC-CH-E , analysis by Inductively Coupled Plasma - Optical Emission Spectrometer (ICP-OES). Test Item(s) Component Description(s) 1 Coating on gray chair 2 Coating on espresso chair 3 Black coating on swivel plate Maximum Allowable Limit : 90 mg/kg - Unit Result Test Item(s) Total Lead (Pb) mg/kg 8 ND 21 Conclusion - Note / Key : ND = Not Detected > = Greater than NR = Not Requested mg/kg = milligram(s) per kilogram NA = Not Applicable, due to no surface coating Detection Limit (mg/kg) : 5 Remark: - Page 7 of 8
8 Please note that this Report is issued under the following terms : 1. This report applies to the sample of the specific product/equipment given at the time of its testing/calibration. The results are not used to indicate or imply that they are applicable to other similar items. In addition, such results must not be used to indicate or imply that TÜV SÜD PSB approves, recommends or endorses the manufacturer, supplier or user of such product/equipment, or that TÜV SÜD PSB in any way guarantees the later performance of the product/equipment. Unless otherwise stated in this report, no tests were conducted to determine long term effects of using the specific product/equipment. 2. The sample/s mentioned in this report is/are submitted/supplied/manufactured by the Client. TÜV SÜD PSB therefore assumes no responsibility for the accuracy of information on the brand name, model number, origin of manufacture, consignment or any information supplied. 3. Nothing in this report shall be interpreted to mean that TÜV SÜD PSB has verified or ascertained any endorsement or marks from any other testing authority or bodies that may be found on that sample. 4. This report shall not be reproduced wholly or in parts and no reference shall be made by the Client to TÜV SÜD PSB or to the report or results furnished by TÜV SÜD PSB in any advertisements or sales promotion. 5. Unless otherwise stated, the tests were carried out in TÜV SÜD PSB Pte Ltd, No.1 Science Park Drive Singapore Page 8 of 8
KOHL S TE ST P ROTOCOL Approved: May 10, 2017
LABELING Labeling / Packaging Review Instructional Literature /Assembly Instruction FPLA 16 CFR 500 & 19 CFR 134 Should be legibly marked with the following information: Distributor s name, trademark or
More informationREPORT. Lab Number: (5105) Page 1 of 1. Index
REPORT Lab Number: (5105)069-0100 Page 1 of 1 Cover Report Protocol Exhibits Other Index 1 Page 2 Pages 6 Pages N/A 1 Page TEST REPORT BATTERY HOUSE LAB LOCATION: BUFFALO, NY 365 24 TH STREET LAB NUMBE
More informationDILLARD'S INC TEST PROTOCOL FOR DILL USA- (V13) KEYCHAIN / BATTERY OPERATED KEYCHAIN / KEYCHAIN WITH LIGHT
By/Date: Page 1 of 5 Criteria Notes esults ating SCOPE: This protocol is applicable for testing of keychain / battery operated keychain / keychain with light. SUPPLEMENTY POTOCOL Note: dditional cost,
More informationREPORT. Lab Number: (5105) Page 1 of 1. Index
REPORT Lab Number: (5105) 213-0075 Page 1 of 1 Cover Report Protocol Exhibits Other Index 1 Page 1 Page 4 Pages N/A 1 Page Technical Report: (5105)213-0075 August 04, 2005 Date Received: August 01, 2005
More informationDILLARD S TEST PROTOCOL FOR DILR US LUGGAGE (V26)
Test Date: Reviewed By/Date: SUPPLEMENTAL PROTOCOLS DILLARD S TEST PROTOCOL FOR 1 The sample shall be reviewed against the requirements of California Proposition 65 to determine if additional testing or
More informationTEST REPORT: CHM12-01-LSM
Date: Tel: +65 68851335 Fax: +65 67784301 Client s Ref: QM-0112-056 Email: Sihai.LI@tuv-sud-psb.sg Note: This report is issued subject to the Testing and Certification Regulations of the TÜV SÜD Group
More informationDILLARD'S INC TEST PROTOCOL FOR DILL USA- (V22) HANDBAG (CHILDREN)
By/Date: Page 1 of 6 SCOPE: This protocol is applicable for testing of handbag for children. SUPPLEENTAY POTOCOL Note: Additional cost, sample size and TAT may be required if testing to 1 or more supplemental
More informationTechnical Report No D Dated
Client: Innokin Technology Co.,Ltd Address: Attn.: Building 6,XinXinTian Industrial Park, XinSha Road, ShaJing street,shenzhen, China George Sample Description: itaste 134 MX-M Model No.: / Contury of
More informationTest Report No.: SZTY TS Date: DEC 04, 2012 Page 1 of 10
Test Report : SZTY1211030991TS Date: DEC 04, 2012 Page 1 of 10 HAPPY ARTS&CRAFTS(NINGBO)CO.,LTD/ HAPE INTERNATIONAL(NINGBO)LTD 9-27 NANHAI ROAD, DAGANG INDUSTRIAL CITY, BEILUN, NINGBO, CHINA PC:315800
More informationPASS TEST REPORT OVERALL RESULT: At the request of the client, the following tests were conducted:
Recipient Email: rwilliams@numomfg.com Pages: Page 1 of 9 SAMPLE INFORMATION: Description: Expanded Vinyl ~ 40287 ~ Royal, Maroon, Grey, Navy, Ebony, Red, White Assortment: - Purchase Order Number: - SKU/style
More informationPASS. Vincent Chow Wai Kit Manager, Chemical Laboratory
Recipient Email: DawnG@greaterchina-usa.com Pages: Page 1 of 6 SAMPLE INFORMATION: Description: Custom Stress Ball Assortment: - Purchase Order Number: 11866JD SKU/style No.: - Toy Co./Agency: - Factory
More informationTest Report No.: AJHL FT Date: JUN.02, 2016 Page 1 of 5
Test Report No.: AJHL1605004946FT Date: JUN.02, 2016 Page 1 of 5 The following sample(s) was / were submitted and identified on behalf of the client as: Sample Description OFFICE CHAIR Type/Style K-106AH
More informationTechnical Report No C Dated
Client: Innokin Technology Co.,Ltd Address: Attn.: Building 6, XinXinTian Industrial park, Xinsha Road Shajing, Baoan District, Shenzhen, China George Description: COOL FIRE IV Model No.: / Country of
More informationTechnical Report No A Dated
Client: Xiamen Guangpu Electronics Co.,Ltd. Address: No.608, West Lingdou Road, Siming District, Xiamen, China. Attn.: Mr. Zheng Description: LED Panel Light Model No.: GPP0330934WP,GPP0330934WPB Country
More informationTechnical Report No B Dated
Client: Innokin Technology Co.,Ltd Address: Attn.: Building6,XinXinTian Industrialpark, Xinsha Road, Shajing, Baoan District, Shenhen, China P.R.C. George Description: itaste VV4 Model No.: / Contury of
More informationTechnical Report No A Dated
Client: Innokin Technology Co.,Ltd Address: Attn.: Building 6, XinXinTian Industrial park, Xinsha Road Shajing, Baoan District, Shenzhen, China George Description: itaste MVP 3.0 Pro Model No.: / Country
More informationKOHL S TEST PROTOCOL Approved: Aug 29, 2018
LABELING Labeling / Packaging Review Uniform Law Labels for Bedding & Upholstered Furniture FPLA 16 CFR 500 & 19 CFR 134 IABFLO Should be legibly marked with the following information: Distributor s name,
More informationTechnical Report No Rev. 00 Dated
Technical Report No. 64.164.14.01453.01 Rev. 00 Dated 2014-05-28 Client: ZhongShan LiangYi Lighting CO.,LTD BeiHai Industrial Zone,GuZhen Town,ZhongShan,GuangDong,P.R.China Test Subject: The submitted
More informationTechnical Report No A Dated
Client: Xiamen Guangpu Electronics Co.,Ltd Address: No.608,West Lingdou Road,Siming District,Xiamen,China. Attn.: Mr. Zhang Description: Panel light (LED PANEL LIGHT) Model No.: Country of origin: GPPS15033X,
More informationTEST REPORT Test Report # 17A E Date of Report Issue: April 24, 2017 Date of Sample Received: April 14, 2017 Pages: Page 1 of 8
TEST REPORT Test Report # Date of Report Issue: April 24, 2017 Date of Sample Received: April 14, 2017 Pages: Page 1 of 8 CLIENT INFORMATION: Company: Address: Mid Ocean Brands B.V. Unit 201, 2/F, Laford
More informationTest Report No.: SDHL FT Date: Aug.16, 2017 Page 1 of 47
Test Report No.: SDHL1707015823FT Date: Aug.16, 2017 Page 1 of 47 EUREKA LLC 4901 MOREAU CT, EL DORADO HILLS, CA 95762 The following sample(s) was / were submitted and identified on behalf of the client
More informationTest Report No. C Date: Sep 14, 2016 Page 1 of 11
Test Report No. C160907030003 Date: Sep 14, 2016 Page 1 of 11 Dragino Technology Co., Limited Room 7009, Zi'An Commercial Building, Qian Jin 1 Road. Xin'An 6th District, Bao'an District ; Shenzhen 518101,China
More information057 - Backup Battery Charger Test Protocol
Base Test Chemical/Analytical 057 - Backup Battery Charger Test Protocol California Proposition 65 Performance Citation: California Health & Safety Code, Sec. 25210.9-25210.12 All samples shall be reviewed
More informationIntertek Testing Services Ltd., Shanghai TFH Division Block B, Jinling Business Square,No.801 Yi Shan Road, Shanghai, China,
TEST REPORT NUMBER: SHH00285677 SERS HOLDINGS GLOBL SOURCING MERCHNDISER: CELI LIU DTE : OCT 20, 2011 DIRECT VENDOR DOMESTIC VENDOR HRDLINES TEST REPORT SHGS OFFICE HONG KONG W.O NO. -- DTE OF SUB. OCT
More informationJUVENILE PRODUCTS MANUFACTURERS ASSOCIATION INC / JPMA
CONSUER PRODUCTS SERVICES DIVISION JUVENILE PRODUCTS ANUFACTURERS ASSOCIATION INC / JPA Date Received: Page 1 of 13 TERRY GOFFE SUER INFANT, INC. 1275 PARK EAST DRIVE WOONSOCKET, RI 02895 UNITED STATES
More informationTest Report For: EMECO INDUSTRIES INC Bar Stool
4700 Broadmoor SE, Suite 200 Kentwood, MI 49512 Telephone: 616-- 656-- 7401 Facsimile: 616-- 656-- 2022 www.intertek-- etlsemko.com EMECO INDUSTRIES INC P.O. No. N / A Page 1 of 18 Test Report For: EMECO
More informationTechnical Report No A Dated
Client: Aquil Star Precision Industrail (Shenzhen) Co., Ltd Address: Attn.: Building A and B, The No. 4 Of Tengfeng Thrid Road, Fenghuang Third Industry, Fuyong Town, Baoan Zone, Shenzhen City, P.R. China.
More informationPOL. IND. LA VARIANTE. MONTE LA PILA, LARDERO (LA RIOJA) SPAIN Marta Montero Product Name:
Applicant: TUC TUC, S.L. OL. IND. LA VARIANTE. MONTE LA ILA, 5. 26140 LARDERO (LA RIOJA) SAIN Attn: Marta Montero roduct Name: ARRASTRE MADERA GRANDE MAGIC FOREST Style No.: 05573 Labelled Age Range: 12
More informationPASS. Vincent Chow Wai Kit Manager, Chemical Laboratory
Recipient Email: rwilliams@numomfg.com Pages: Page 1 of 9 SAMPLE INFORMATION: Description: 729's Headwind (black, white, cobalt) Assortment: - Purchase Order Number: - SKU/style No.: - Toy Co./Agency:
More informationTest Report No.: SDHL FT Date: May 15, 2017 Page 1 of 15
Test Report No.: SDHL1703004564FT Date: May 15, 2017 Page 1 of 15 HERMAN MILLER NO.488, QIAN TANG JIANG RD., BEILUN, NINGBO, ZHEJIANG, 315800, P.R. CHINA The following sample(s) was / were submitted and
More informationNovitaTech Engineering
NovitaTech Engineering 490869 TEST REPORT FOR PDG Product Design Group Eclipse 600 MANUAL WHEELCHAIR TEST DOCUMENTS AS3695:1992, AS3696-1:1990, AS 3696-3:1990, AS 3696-5:1989, AS 3696-8:1998, ISO 7176-7:1996
More informationSAFETY AND COMPLIANCE TESTING FOR SURESTOP
SAFETY AND COMPLIANCE TESTING FOR SURESTOP Tested Sample(s) Brand Model Color Size Vendor P/N Country of Origin Age Grading Children s Product : Bicycle Brake Pads : SureStop : SureStop Brakes Prepared
More informationJoint Oil Analysis Program Spectrometer Standards SCP Science (Conostan) Qualification Report For D19-0, D3-100, and D12-XXX Series Standards
Joint Oil Analysis Program Spectrometer Standards SCP Science (Conostan) Qualification Report For D19-0, D3-100, and D12-XXX Series Standards NF&LCFT REPORT 441/15-008 Prepared By: MICHAEL PERETICH, PHD
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 BUREAU VERITAS CONSUMER PRODUCTS SERVICES MEXICO, S.A. DE C.V.-PUEBLA 1 Circuito del Sol 3905-01 Colonia Nuevo Amanecer Puebla, Puebla 72400, Mexico Alicia
More informationTEST REPORT Report No.: R-cn E-S2 Page 1 of 9
Report No.: R-cn5-1505057-E-S2 Page 1 of 9 Applicant Name Applicant Address : WINHAND TOYS MANUFACTURING CO.,LTD : NO.106 HAIFA ROAD, HAICANG INDUSTRIAL DISTRICT, XIAMEN, CHINA. The following information
More informationTest Report No.: AJD Date: NOV.05, 2013 Page: 1 of 5
Test Report No.: AJD201307381 Date: NOV.05, 2013 Page: 1 of 5 HR FURNITURE CO., LTD SHANGJIABAO ECONOMICAL DEVELOPMENT ZONE, SHENGFANG TOWN, BAZHOU, HEBEI, CHINA The following sample(s) was / were submitted
More informationCOMFORT PRODUCT INC. Technical Report: (1215) Initial Report Date: August 03, 2015 Date Received: July 31, 2015 Page 1 of 22
CONSUER PRODUCTS SERVICES DIVISION COFORT PRODUCT INC Date Received: July 31, 2015 Page 1 of 22 S.TAN LOT 222, LORONG 4D, SUBANG NEW VILLAGE, 40150 SHAH ALA, SELANGOR, ALAYSIA. Sample Description: 2 DRAWER
More informationThis document is expired, please contact Jennifer Buoniconti at for updated protocol information or about UL s Services.
Protocol Printed: May 2, 2016 10:24 am UL Standard Product Requirement Protocol ID: 8887 Approved by: Lardner-Stone, Anne Approved Date: May 31, 2013 Modified Date: Jun 04, 2014 Category: Item: Country:
More information: JUSTFOG DONGGUAN CO., LTD. BLDG, 3, DASHADUN INDUSTRIAL PAPK, WUSHAJIANGBEI VILLAGE, CHANG AN TOWN, DONGGUAN. SUMMARY OF TEST RESULTS
TEST REPORT LAB NO. : (8816)0630026 PAGE : 1 OF 11 APPLICANT : JUSTFOG DONGGUAN CO., LTD. BLDG, 3, DASHADUN INDUSTRIAL PAPK, WUSHAJIANGBEI VILLAGE, CHANG AN TOWN, DONGGUAN. DATE OF SUBMISSION : Mar 3,
More informationADDRESS : 5/F., NO NAIYAN RD, JIAOJIANG, TAIZHOU, ZHEJIANG, CHINA. TURN AROUND TIME : 19-Jun-2012 to 25-Jun-2012, 4 working days
TEST REPORT Page : 1 of 7 APPLICANT : KINGDOM TOYS & GIFTS CO., LTD ADDRESS : 5/F., NO.71-2 71-7 NAIYAN RD, JIAOJIANG, U, ZHEJIANG, CHINA U KINGDOM TOYS & GIF SAMPLE DESCRIPTION : WOODEN TOYS ITEM NO.
More informationApplicant: GUANGDONG XIN YU TECHNOLOGY INDUSTRIAL Date: Mar 21, 2018 CO.,LTD. LAI MEI INDUSTRIAL ZONE, CHENGHAI DISTRICT, SHAN TOU, GUANGDONG, CHINA
Applicant: GUANGDONG XIN YU TECHNOLOGY INDUSTRIAL Date: Mar 21, 2018 CO.,LTD. LAI MEI INDUSTRIAL ZONE, CHENGHAI DISTRICT, SHAN TOU, GUANGDONG, CHINA Attn: MS LIN Sample Description: Sixty (60) styles of
More informationThis is a new permit condition titled, "2D.1111 Subpart ZZZZ, Part 63 (Existing Non-Emergency nonblack start CI > 500 brake HP)"
This is a new permit condition titled, "2D.1111 Subpart ZZZZ, Part 63 (Existing Non-Emergency nonblack start CI > 500 brake HP)" Note to Permit Writer: This condition is for existing engines (commenced
More informationTEST REPORT. NO.: A001T Date: Jul 29, 2014 Page 1 of 7
TEST REORT NO.: A001T140610025001-2 Date: Jul 29, 2014 age 1 of 7 Applicant: EASY WAY(HONG KONG) CO.,LTD Address: Flat D, 13F Sing Kong Building 233 Lockhard Wanchai Hong Kong Report on the submitted sample
More informationTESTING REPORT. ROLLATORS - ISO classification in accordance with the INTERNATIONAL STANDARD ISO :2005. Testing No. 07.
Danish Centre for Assistive Technology TESTING REPORT ROLLATORS - ISO classification 12.06.06 in accordance with the INTERNATIONAL STANDARD ISO 11199-2:2005 Testing No. 07.44A This page is page 1 of a
More informationTEST REPORT. Version:V1.0 Page 1 of 9. Client company : Berdis Lighting Co., LTD.
TEST REPORT Client company : Berdis Lighting Co., LTD. Client address : 6F, No.1, South 2nd Lane, HuaTai East Road, Caosan Industrial Park, Guzhen Town, Zhongshan City, Guangdong Province, China Report
More informationApplicant: GUANGDONG XIN YU TECHNOLOGY INDUSTRIAL Date: Feb 24, 2017 CO.,LTD. LAI MEI INDUSTRIAL ZONE, CHENGHAI DISTRICT, SHAN TOU, GUANGDONG, CHINA
Applicant: GUANGDONG XIN YU TECHNOLOGY INDUSTRIAL Date: Feb 24, 2017 CO.,LTD. LAI MEI INDUSTRIAL ZONE, CHENGHAI DISTRICT, SHAN TOU, GUANGDONG, CHINA Attn: MS MA Sample Description: Forty-six (46) styles
More informationExample Petition for Exemption
Example Petition for Exemption Paint Stripping and Miscellaneous Surface Coating Operations Area Source Rule 40 CFR Part 63 Subpart HHHHHH ( 63.11169 63.11180 and Table 1) An exemption from the requirements
More informationTable 1. Air Sampling Results (ng/m 3 ) for Building D (100 and 200, Mako Shark) at MHS Malibu High School Malibu, California
Table 1. Air Results (ng/m 3 ) for Building D (100 and 200, Mako Shark) at MHS Placard ID (August Lights Off Lights On (December 28, Summer 2015 Summer 2016 Summer 2017 101A 101 (west) 101B 101 (east)
More informationSFI SPECIFICATION 15.4 EFFECTIVE: JULY 20, 2010 * PRODUCT: Top Fuel and Funny Car Drag Race Drive Beadlock Wheels
SFI SPECIFICATION 15.4 EFFECTIVE: JULY 20, 2010 * PRODUCT: Top Fuel and Funny Car Drag Race Drive Beadlock Wheels 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures
More informationSHENZHEN TIMEWAY TESTING LABORATORIES
Report No: File reference No: TW1609018 2016-09-08 Applicant: Product: Model No: Brand Name: Test Conclusions: Fold Cable MO8887 N/A Based on the verification results of the submitted samples, the test
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 nd Floor uilding No 4 Shanghai Comalong Industrial Park 889 Yi Shan Road Shanghai 200233 China Contact: Ms Cynthia Liu Tel: +86 21 6091
More informationKOHL S TE ST P ROTOCOL Approved: May 23, 2016
LABELING Labeling / Packaging Review (If Applicable) Verify Label Claims FPLA 16 CFR 500 & 19 CFR 134 Visual Check/ Performance Claims Shall be legibly marked with the following information: Distributor
More informationXTREME Protocol for Speaker
Page 1 of 8 Test Items Testing Requirement / Limit Supplemental Protocol **AC adaptor test XTM-EA004(US) Require if the product sold with an AC adaptor. Document Check 1. Labelling F.P. & L. Act (16 CFR
More information: PARTICLE INDUSTRIES, INC 126 POST ST, 4TH FLOOR, SAN FRANCISCO, CA USA SUMMARY OF TEST RESULTS
TEST REPORT APPLICANT DATE OF SUBMISSION : NOV 12, 2018 PAGE : 1 OF 10 : PARTICLE INDUSTRIES, INC 126 POST ST, 4TH FLOOR, SAN FRANCISCO, CA 94108 USA TEST PERIOD : NOV 12, 2018 TO NOV 20, 2018 SAMPLE DESCRIPTION
More informationTest Report. No. SHAHG Date: 07 Nov Page 1 of 9.
Test Report. No. Date: 07 Nov 2016. Page 1 of 9. DO YOUR SPORTS GMBH. NOBELSTRABE 12 IN 41189 MONCHENGLADBACH-GERMANY.. The following sample(s) was/were submitted and identified on behalf of the clients
More informationDavid Fagan, Mobility Manager Paragon Mobility Pty Ltd 3/10 Tapnor Crescent, Brendale, Queensland th December, 2011.
David Fagan, Mobility Manager Paragon Mobility Pty Ltd 3/10 Tapnor Crescent, Brendale, Queensland. 4500 15 th December, 2011 Dear David, Reference: testing the Catalyst Spark manual wheelchair to 77 kg
More informationKOHL S TEST PROTOCOL Approved: April 25, 2017
LABELING Labeling / Packaging/ Marking Review Package or Instructions Rechargeable Batteries (If Applicable) FPLA 16 CFR 500 & 19 CFR 134 ANSI C18.1M- 1992 Sect. 7.5 (modified) All Samples Should be legibly
More informationAPPLICANT: EMECO DATE: Mar 10, ELM AVE HANOVER, PA, USA
APPLICANT: EMECO DATE: Mar 10, 2011 805 ELM AVE HANOVER, PA, 17331 USA ATTN: MAGNUS BREITLING THIS IS TO SUPERSEDE REPORT NO. SZHH00526912 DATED SEP 20, 2010 SAMPLE DESCRIPTION: TWO (2) PIECES OF SUBMITTED
More informationJoint Oil Analysis Program Spectrometer Standards VHG Labs Inc. Qualification Report For D19-0, D3-100 and D12-XXX Series Standards
Joint Oil Analysis Program Spectrometer Standards VHG Labs Inc. Qualification Report For D19-0, D3-100 and D12-XXX Series Standards NF&LCFT REPORT 441/13-010 Prepared By: MICHAEL PERETICH, PhD Oil Analysis
More informationRestriction of the use of certain hazardous substances (RoHS) Summary Report
JJ Electronic S.R.O A. Hlinku 4 022 01 Čadca Slovak Republic Restriction of the use of certain hazardous substances (RoHS) Summary Report Test of: Vacuum Tube Model Number: EL34 Unique Identifier: None
More informationSFI SPECIFICATION 35.2 EFFECTIVE: DECEMBER 29, 2014 *
SFI SPECIFICATION 35.2 EFFECTIVE: DECEMBER 29, 2014 * PRODUCT: Heavy Duty Stock Car Steel Wheels 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and minimum standards
More informationTest Report. No. SHAHG Date: 11 Nov Page 1 of 7.
Test Report. No. Date: 11 Nov 2016. Page 1 of 7. DO YOUR SPORTS GMBH. NOBELSTRABE 12 IN 41189 MONCHENGLADBACH-GERMANY.. The following sample(s) was/were submitted and identified on behalf of the clients
More informationTest Report. for. Chilicon Power 1563 Calle Patricia Pacific Palisades, CA USA. Project Number: G Prepared By:
Test Report for Chilicon Power 1563 Calle Patricia Pacific Palisades, CA 90272 USA Project Number: G100834560 Prepared By: Intertek 1500 Brigantine Drive Coquitlam, B.C. V3K 7C1 Canada Intertek Testing
More informationIndex. The Benefits of Experience 2. Design and Manufacture 3. Quality 3. Slides and Hooks 4-7. Gambrels & S Hooks 8. Beef Rollers 9.
Index The Benefits of Experience 2 Design and Manufacture 3 Quality 3 Slides and s 4-7 Gambrels & S s 8 Beef Rollers 9 Bleeders 10 Other Components 11-12 Notes on 13 Page 1 The Benefits of Experience.
More informationTEST REPORT FOR: Product Design Group Fuze T50 Manual Wheelchair (204 kg / 450 lb)
TEST REPORT FOR: Product Design Group Fuze T50 Manual Wheelchair (204 kg / 450 lb) REFERENCED DOCUMENTS ISO7176-1:1999, ISO7176-3:2003, ISO7176-5:2008 ISO7176-7:1998, ISO7178-8:1998, ISO7176-13:1989, ISO7176-15:1996,
More informationA brief guide for identification of non-compliant construction machinery. Is this. Compactor / Roller compliant with European legislation?
A brief guide for identification of non-compliant construction machinery Is this Compactor / Roller compliant with European legislation? Introduction Construction equipment placed on the EU market for
More informationReport Issued: October 19, 2014 Project No.: 23942
Report Number: 1052-14017 Report Issued: October 19, 2014 Project No.: 23942 Client: Showerstart LLC 15354 North 83 rd Way Suite 102 Scottsdale, AZ 85260 Contact: Mr. Jason Swanson Source of Samples: The
More informationNo. HKGEC Date: 13 Oct 2017 Page 1 of 10
No. HKGEC1700775405 Date: 13 Oct 2017 Page 1 of 10 RUBADUE WIRE CO.,INC. 1301 NORTH 17TH AVE, GREELEY, CO 80631, GREELEY 80631 UNITED STATES.. The following sample(s) was/were submitted and identified
More informationObtaining ASTM D6400- D6868 Approval
Rev 3.0 Obtaining ASTM D6400- D6868 Approval Woods End Laboratories inc. is a BPI Approved Certifier lab 1 Key BPI Requirements All products must meet ASTM D6400, ASTM D6868, ISO17088 or EN13432 Not contain
More informationNote to users: This electronic document is not subject to copyright. You may copy it, but you are requested not to disseminate altered copies.
Note to users: This electronic document is not subject to copyright. You may copy it, but you are requested not to disseminate altered copies. Technology Assessment Program NIJ Standard for Metallic Handcuffs
More informationPROCUREMENT SPECIFICATION FOR CNP19 CHERRY RIVETLESS NUT PLATE
PROCUREMENT SPECIFICATION NUMBER PRINTED COPIES OF THIS DOCUMENT ARE CONSIDERED REFERENCE UNLESS OTHERWISE STAMPED IN RED INK. PROCUREMENT SPECIFICATION FOR CNP19 CHERRY RIVETLESS NUT PLATE Authorizing
More informationC.A.S.E. AIR CARRIER SECTION POLICIES AND PROCEDURES
INTO-PLANE AUDIT CHECKLIST Audit Date: Allocation #: Station Code: City: Vendor Name: Address: Primary Contact: Title: Phone: Fax: E-mail: Auditor: Acceptable: Conditionally Acceptable Not Acceptable Register:
More informationSFI SPECIFICATION 15.2 EFFECTIVE: MAY 1, 2008 *
SFI SPECIFICATION 15.2 EFFECTIVE: MAY 1, 2008 * PRODUCT: Drag Race Front Wheels 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and minimum standards for evaluating
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CONSUMER TESTING LABORATORIES, INC. 611 Dream Valley Road Rogers, AR 72756 Chessie Koko Phone: 479-636-8782 CHEMICAL Valid To: May 31, 2018 Certificate Number:
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TUV SUD AMERICA - AUBURN HILLS 1755 Atlantic Blvd. Auburn Hills, MI 48326 William (Mac) Elliott Phone: 813 284 2736 MECHANICAL Valid To: August 31, 2018 Certificate
More information56 LESLIE HOUGH WAY SALFORD GREATER MANCHESTER M6 6AJ UNITED KINGDOM. Test Report EN : TA11/0004c.
56 LESLIE HOUGH WAY SALFORD GREATER MANCHESTER M6 6AJ UNITED KINGDOM Email: testing@inspec-international.com Website: www.inspec-international.com Tel: +44 (0) 16 17 37 06 99 Fax: +44 (0) 16 17 36 01 01
More informationSFI SPECIFICATION 35.1 EFFECTIVE: AUGUST 26, 2008 *
SFI SPECIFICATION 35.1 EFFECTIVE: AUGUST 26, 2008 * PRODUCT: Stock Car Steel Wheels 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and minimum standards for evaluating
More informationTEST REPORT FOR: Product Design Group Inc. Elevation Manual Wheelchair 115 kg, 253 lb
TEST REPORT FOR: Product Design Group Inc. Elevation Manual Wheelchair 115 kg, 253 lb REFERENCED DOCUMENTS ISO7176-1:1999, ISO7176-3:2003, ISO7176-5:2008, ISO7176-7:1998, ISO7176-8:1998, ISO7176-13:1989
More informationAnalysis of Petroleum Samples Using the Teledyne Leeman Labs
APPLICATION NOTE: TECHNOLOGY: INDUSTRY: AN1802 ICP Petroleum Analysis of Petroleum Samples Using the Teledyne Leeman Labs Prodigy Plus ICP-OES John Condon, Applications Chemist and Bruce MacAllister, Applications
More information: SHENZHEN INNOKIN TECHNOLOGY CO., LTD BUILDING 6,XINXINTIAN INDUSTRIAL PARK, XINSHA ROAD, SHAJING,BAOAN DISTRICT,SHENZHEN, CHINA
TEST REPORT PAGE : 1 OF 19 APPLICANT : SHENZHEN INNOKIN TECHNOLOGY CO., LTD BUILDING 6,XINXINTIAN INDUSTRIAL PARK, XINSHA ROAD, SHAJING,BAOAN DISTRICT,SHENZHEN, CHINA DATE OF SUBMISSION : JUL 24, 2017
More informationVersion:V1.0 Page 2 of 17
Results: A. EU RoHS Directive 2011/65/EU and its amendment directives on XRF Test method: With reference to IEC 62321-3-1:2013, Screening by X-ray Fluorescence Spectroscopy (XRF) Seq. No. A Tested Part(s)
More informationPART XV Metering Systems SECTION 2 GUIDE TO GAS METERING SYSTEMS
THE INSTITUTE OF PETROLEUM PETROLEUM MEASUREMENT MANUAL PART XV Metering Systems SECTION 2 GUIDE TO GAS METERING SYSTEMS THE INSTITUTE OF PETROLEUM PETROLEUM MEASUREMENT MANUAL PART XV Metering Systems
More informationTube: End-cap: Core: Solder: Lead-free glass Nickel plated brass Ceramic Sn-1.5Cu. Pb87.5-Sn10-Ag2.5* ma less than 1 A.
* 1 RoHS Dimensions and construction: Tube: End-cap: Core: Solder: Lead-free glass Nickel plated brass Ceramic Sn-1.5Cu (mm) Marking: Pb87.5-Sn10-Ag2.5* 1 100 ma less than 1 A 1 A 15 A SOC [rated current]
More informationANNEX F TESTING STANDARDS FOR PORTABLE SOLAR LAMPS
ANNEX F TESTING STANDARDS FOR PORTABLE SOLAR LAMPS ITB/2017/869 1 Off- grid solar photovoltaic lighting kits requirements 1. Scope This standard applies to off-grid lighting appliances or kits that can
More informationTITLE: SPECIFICATION FOR BENCH VICE & BENCH GRINDER TABLE OF CONTENTS. 0.1 Circulation List. 0.2 Amendment Record
Page 1 of 10 TABLE OF CONTENTS 0.1 Circulation List 0.2 Amendment Record FOREWORD 1. SCOPE 2. REFERENCES 3. TERMS AND DEFINITIONS 4. REQUIREMENTS 5. TESTS AND INSPECTION 6. MARKING AND PACKING 7. DEMONSTRATION
More informationKorea Eco-label Standards EL764 Revised 19. JUL Ministry of Environment Batteries EL764:2012
Korea Eco-label Standards EL764 Revised 19. JUL. 2012 Ministry of Environment Batteries EL764:2012 http://www.me.go.kr Publisher: Minister of Environment Publication: 02. SEP. 2005 Ministry of Environment
More informationMANUFACTURER : FLASHBAY ELECTRONICS BLGD B&C XI FENG CHENG IND ZONE, NO. 2 FUYUAN ROAD HE PING, VILLAGE, FUYONG TOWN, SHENZHEN
TEST REPORT LAB NO. : (9317)097-0679-R1 PAGE : 1 OF 13 The report is amendment of and supersedes the previous report (9317)097-0679 dated Apr 26, 2017 APPLICANT : FLASHBAY ELECTRONICS BLGD B&C XI FENG
More informationSFI SPECIFICATION 1.3 EFFECTIVE: MAY 23, 2000 * PRODUCT: Nitro-Methane Drag Race Multiple Disc Clutch Assemblies
SFI SPECIFICATION 1.3 EFFECTIVE: MAY 23, 2000 * PRODUCT: Nitro-Methane Drag Race Multiple Disc Clutch Assemblies 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and
More informationPFI Quality Assurance/Quality Control (QA/QC) Program for Residential/Commercial Densified Fuels
PFI Quality Assurance/Quality Control (QA/QC) Program for Residential/Commercial Densified Fuels Scope: This program must be utilized by participating pellet fuel manufacturers to assure consistent quality
More informationLead-free glass Nickel plated brass 62 ma 1.25 A Over 1.25 A 3 A Epoxy resin 62 ma less than 1 A. Tube: End-cap: Solder: Adhesive: Marking: 1 A 3 A
RoHS Pb Dimensions and construction: (mm) Tube: End-cap: Solder: Adhesive: Marking: Lead-free glass Nickel plated brass 62 ma 1.25 A Over 1.25 A 3 A Epoxy resin 62 ma less than 1 A 1 A 3 A Sn-0.7Cu Sn-3.0Ag-0.5Cu
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CONSUMER TESTING LABORATORIES, INC. 2601 SE Otis Corley Drive Bentonville, AR 72712 Chessie Koko Phone: 479 286 2300 MECHANICAL Valid To: September 30, 2018
More informationTEST REPORT. Report No.: G Rendered to: SKYCO SKYLIGHTS Costa Mesa, California
TEST REPORT Report No.: G1418.01-301-44 Rendered to: SKYCO SKYLIGHTS Costa Mesa, California PRODUCT TYPE: Fall Protection Security Bars SERIES/MODEL: FSB-1A/FSB-10A/FSB-1/FSB-10 SPECIFICATION: Occupational
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CONSUMER TESTING LABORATORIES, INC. 2601 SE Otis Corley Drive Bentonville, AR 72712 Stephanie Anderson Phone: 479 286 2376 MECHANICAL Valid To: September 30,
More informationOff-grid lighting testing and certification processes. Pradeep Kumar
Off-grid lighting testing and certification processes Pradeep Kumar Centre for Research on Sustainable Building Science The Energy and Resources Institute (TERI) Indian Habitat Centre, New Delhi, India
More informationInvestigation into UK socket-outlets incorporating USB charging points
Investigation into UK socket-outlets incorporating USB charging points Electrical Safety First investigated a number of commercially available UK socket-outlets incorporating USB ports, as a repeat of
More informationIncinerator Monitoring Program Ash Characterization Summary
Onondaga County Health Department Division of Environmental Health 421 Montgomery Street Syracuse, New York 13202 Incinerator Monitoring Program 2013 Ash Characterization Summary April 1, 2014 Submitted
More informationAPPLICANT : FLASHBAY ELECTRONICS BLDG B&C XI FENG CHENG IND ZONE, NO. 2 FUYUAN ROAD HE PING, VILLAGE, FUYONG TOWN, SHENZHEN SUMMARY OF TEST RESULTS
TEST REPORT LAB NO. : (9317)313-0504 PAGE : 1 OF 15 APPLICANT : FLASHBAY ELECTRONICS BLDG B&C XI FENG CHENG IND ZONE, NO. 2 FUYUAN ROAD HE PING, VILLAGE, FUYONG TOWN, SHENZHEN CONTACT PERSON : LEVIN DATE
More informationIncinerator Monitoring Program Ash Characterization Summary
Onondaga County Health Department Division of Environmental Health 421 Montgomery Street Syracuse, New York 13202 Incinerator Monitoring Program 2012 Ash Characterization Summary June 1, 2013 Submitted
More informationbe capable of access to a child. CPSC considers products that exceed 600 ppm accessible or ingestible lead to violate this provision.
so Legislation, Regulations, Guidelines and Standards Restricting Lead in Consumer Products U.S. Federal Regulations and Requirements Applicable to Lead in Children s Products 15 U.S.C. 1261(q)(1) In force
More informationMCF3 25CT Inrush-withstand
RoHS Pb Dimensions and construction: (mm) Case: End-cap substrate metal: End-cap primary plating: End-cap surface plating: Adhesive: Marking: Ceramic Copper t=0.25 mm Nickel plated, 0.5 μm or more Tin
More information