T-nuts, jaw blanks 54 SMW-AUTOBLOK

T-nuts, jaw blanks 54 SMW-AUTOBLOK

T-nuts grippers SMW-AUTOBLOK Berg Forkardt owa Kitagawa Röm Scunk ST T-nuts for cucks ST IC serration 1/16 x 90 or 3/32 x 90 Page 56 STE double T-nuts for cucks STE IC serration 1/16 x 90 or 3/32 x 90 Page 60 STE-M double T-nuts for cucks STE-M METRIC serration 1,5 x 60 Page 62 TS T-nut bolts only for Berg-cucks type K TM slotted nuts TS, TM T-nuts grippers Page 64 SO special T-nuts to customer request SO Page 65 UE 10 jaw blanks ardened steel UE 10 UE 20/21 UE 20 jaw blanks ardened steel UE 21 jaw blanks ardened steel wit one row of teet UE 30 jaw blanks solid carbide M clamping points SS UE 30 Page 66 Page 66 M DS-R jaw blanks round/solid carbide DS-Q jaw blanks square/solid carbide DS-R Page 67 Page 67 DS-Q Page 68 Page 68 i 14 25 15 30 precision gripper inserts SS ligt duty pull down eavy duty pull down ligt duty pull down eavy duty pull down safety advise: Top jaws are safety components, wic can unter ig load depending on teir use. Max grip forces and speeds must not be exceeded at any time. For safety reasons all jaws as well as all T-nuts and bolts must be cecked regularly for damage and cracks. Page 69 SMW-AUTOBLOK 55

T-nuts ST quenced and ground incl. screw DI 912 12.9 version 1 version 2 Type vers. screw torque SMW-AUTOBLOK SMW Autoblok DI 912 Md max. (m) ST 11 013862 2 11 21,5 7,5 M8 M8 x 30 30 SP 125 STP 125 STWP 125 ST 12 081966 2 12 17 7 M8 M8 x 20 30 KDV 130 ST 12-1 089810 2 12 21,5 7,5 M8 M8 x 25 30 SP 125/98 STP 125 ST 14 013863 2 14 26,5 9,5 M10 M10 x 35 50 SP 160 STP 165 SP 160 STP 160 STWP 160 ST 14-1 085874 2 14 20 7,5 M10 M10 x 25 50 OD 170 DB 170 ODL 170 D 170 DL 170 D 165 D/FC 165 ST 14-2 035958 1 14 18,5 6,5 M10 M10 x 20 50 FK-D 165 A-D 165 AL-D 165 B-D 165 BD-FC 165 BB-D 175 B-D 165 PB-D 165 AP/T-D 170 PBI-D 165 YD-S 180 ST 17-5 064921 1 17 18,5 6,5 M12 M12 x 25 70 FK-D 165 ST 17 016021 2 17 23 9 M12 M12 x 30 70 FK 160/200 FKS 160/200 KDV 160/200/250 KDV 160/200/250 KFV 160/200 KFMF 160/200 ST 17-1 085877 2 17 22,3 8,3 M12 M12 x 30 70 OD 200 OD 220 ODL 200 DB 200 D 200 D 220 DL 200 D 210 CD 200 D/FC 210 ST 17-2 034245 1 17 20,5 7,5 M12 M12 x 25 70 FK-D 210 A-D 210 AL.-D 210 B-D 210 BD-FC 210 BB-D 210 ST 17-14 036976 1 17/1420,5 7,5 M12 M12 x 25 70 B-D 210 PB-D 210 PBI-D 210 AP/APL/T-D215/260 RC-D210 YD-S 210/226 ST 17-3 081825 2 17 21,5 9 M12 M12 x 25 70 ST 17-4 013864 2 17 26,5 9,5 M12 M12 x 30 70 SP 200 SP 240 SP 200 STP 200 STP 240 CC 240 Z STWP 200 LP 205 ST 21 014788 2 21 27 11 M16 M16 x 35 150 FK 250/270/315 FKS 250/315 ST 21/17 081812 3 21/17 27 11 M12 M12 x 35 70 KDV 315/400 KDV 315/400 KZF-ES 200 KZF 200 KFV 250/315 KFMF 250/315 56 SMW-AUTOBLOK

version 3 1 iplease observe! Always tigten T-nuts wit a torque wrenc. Forkardt Röm Scunk 3 KT 130-33 3 KT 140-37 KFD 130 KF 140 LVE 125 KFD-S 160 TP 125 ROTA TP 125 ROTA CD 165 TP 160 ROTA TP 160 ROTA CK Plus 165 ROTA CF 185 ROTA C / CF Plus 185 2BLE-PS 160/200 2BLEF 200 KL/KT/KT/KT/KS-PS 160/200 KSF 175/200 KS/KL 250 Mo K/KF/KT 160/175/200 KS 160/200/250 K/KP 200 /F 160/175/200 QLK/QLC 160/175/200 QLK/QLC-KS 200/250 QLK/QLC-LS 160/200 QLC-A 200 UVE 160/200/250 T/TF/SL 165/210 ROTA CD 210 ROTA C / ROTA CF Plus 165 T-nuts grippers ROTA 2 B 160 ROTA CD 185 ROTA C / CF 165/210 ROTA CO 210 ROTA C / CF Plus 215 KFD 160/200 KFD-AF 160/200 KFD-F 160/200 KF-F 160/200 KF- 160/200 KF-C 160/200 SPD 160/200 LVE 160/200 S 200/250 3 250/315 3 F 250/315 KT 250/315 KS 250/315 KSF 250/315 3 KTF 250/315 K 250/315 KP 250-315 KLC 250/315 KL 250 KSPS 250/300 3 F 290 KS 315/400 KS 400 KSF 400 UVE 315 3 F 400 (Index) 2 BLE 200 2 BLE 250 Mo 2 BL 200 QLC 250/315 E 250 Mo QLK/QLC-KS 315/400 QLK/QLC-LS 250/315 QLC-A 250/315 TP 200 ROTA TP 200 ROTA C-D 250 SL 250 T 250 TF 250 S 315 SL 315 ROTA C-D 315 T 315 TF 315 ROTA CF 315 SMW-AUTOBLOK 57

T-nuts ST quenced and ground incl. screw DI 912 12.9 version 1 version 2 Type vers. screw torque SMW-AUTOBLOK SMW Autoblok DI 912 Md max. (m) ST 21-3 081826 2 21 25,5 11 M16 M16 x 35 150 -D 400 OD 250-315-400 -M 400 ODL 250-315-400 RC-D 400 D 250-315-400 RC-M 400 DL 250-315-400 D 250-315-400 D/FC 250-305-400 CD 250/315 DB 300 2 CLD 200 US-2 CLD 200 ST 21-5 033429 2 21 30 11 M16 M16 x 35 150 SP 250/98 SP 250/315 SP 350 LP 250/305 STP 250/98 STP 280 STP 250/315 SP 280/350 STWP 250/315 ST 21-6 034197 1 21 26,5 10 M16 M16 x 35 150 FK-D 260/315 A-D 250/315 ST 21/17-1 034208 21/1726,5 10 M12 M12 x 30 70 AL-D 250/315 A-M 315 AL-M 315 B-D 250/315 T-D 315 T-M 315 AP-D 315 AP-M 315 APL-D 315 APL-M 315 B-D 250/315 BD-FC 250/315 B-M 315 BB-M 315 PB-D 250/315 BB-D 250/315 RC-D 250/305 BM-FC 315 RC-M 305 PBI-D 250/315 YD-S 250/315 ST 25 014812 2 25,5 29 11 M20 M20 x 40 300 FK-D 400 FK 400/500 FK-D 500 FKS 400/500 KDV 500 KDV 500 KDS 630 KZF 250 KZF 315/400 KZF-ES 315/400 KFV 400/500 KFV 630/800 ST 25-1 013866 2 25,534,5 14,5M18 M18 x 55 220 STP 400/500 LP 380/460/500 BB 400/500 BB 400/500-ES ST 25-3 12065020 2 25,5 34 15 M20 M20 x 40 300 A/AL-D 400 2 CLD 250/315 BB- 400/460/500/600 US-2 CLD 250/315 BB- ES 400/460/500/600 B-D 400/450/500/630/800 BD-FC 400/450/500/630/800 CL-D 250/315 YD-S 400 ST 25-4 12065002 3 25,5 40 15,5M20 M20 x 50 300 D 610/640/800 YDL-S 800 I-D 500/630/800 IL-D 500/630/800 ST 25-5 199908 2 25,5 40 15 M20 M20 x 50 300 BB-AZ 590 BB-SC 600 ST 30 081811 2 30 41 15 M24 M24 x 50 450 ST 30-1 014827 2 30 36 15 M24 M24 x 50 450 FKS 630/800 ST 30-2 013868 2 30 41 15 M24 M24 x 70 450 ST 30-3 13063900 2 30 44 18 M24 M24 x 60 450 BB- 630/800/1000 STP 630/800 BB- ES 630/800/1000 BB 630/800/1000 I-D 1000/1250 BB-ES 630/850/1000 BBU-AZ 630/750 58 SMW-AUTOBLOK

iplease observe! Always tigten T-nuts wit a torque wrenc. Forkardt Röm Scunk KFD/KFD-F 250/315 KF/KF-F/KF-/KF-C 250/315 KFD-AF 250/315 KFD-E 254/315 KFL 315/400 KFA 200 LVE 250/305/315 TP 205/315 ROTA TP 250/315 ROTA CO 260/315 ROTA C 250 ROTA CF 250 ROTA 2B 200 ROTA C Plus 260/315 ROTA CK Plus 315 ROTA CF Plus 260/315 T-nuts grippers 3 400/500/630 QLC 400 QLK 400 3 F 400/500/630 3 KTF 400/500 UVE 400/500/630/800 KT 400/500 K 400/500 KL 400/500 KLC 400/500 KP 400 KS 500/630 KS 500 KSL 630 KSF 630 KL 300 KSF 560 2 BLE 250 2 BLE 315 2 BLE-PS 300 2 BLE-PS 315 2 BLE 400 2 BLE 500 2 BLE-PS 400/500 2 BL 250/315/400 KF 400 KFD 400 LVE 400 KF 500 KFD 500 LVE 500 KFD-E 400 KFD-F 400 KFD 630 LVE 630 KFD-F 500 KFD 800 LVE 1000 KFD-S 400 KFL 500 KFA 250 KFD-S 500 KFL 600 KFA 315 KF-F 400/500 KF- 400/500 KF-C 400/500 SL 400 ROTA C-D 400/600 ROTA C 400 ROTA CF 400 T 400 TF 400 T 500 TF 500 ROTA 2B 250/315/400 TB 400 TB 500 ROTA TB 400/500/610 ROTA EP 380/460 ROTA TB-L 400/500/610 S 400 S 500 ROTA CO 400/500 KS 800/1000 KSF 1000 KFD 1000/1250 ROTA CD 1000 ROTA C 1000 ROTA TB 800/850/1000/1200 ROTA TB-L 800/850/1000 ROTA C 630 ROTA TB 630 ROTA TB-L 630 630 T 630 SMW-AUTOBLOK 59

double T-nuts STE b quenced and ground incl. screw DI 912 12.9 version 2 Type vers. b screw torque SMW-AUTOBLOK DI 912 Md max. (m) STE 08 038265 2 8 13,5 5 12 M6 M6 x 20 16 FK-D 110 STE 12 12061300 2 12 15 6,5 16 M8 M8 x 20 30 B-D 130 PB-D 130 B-D 130 BB-D 140 STE 12-1 12061200 1 12 15 6,5 16 M8 M8 x 20 30 A-D 125 AL-D 125 STE 14 73061650 1 14 18,5 6,5 16,5 M10 M10 x 20 50 FK-D 165 A/AL/B/B-D 165 BD-FC 165 PB/PBI/RC-D 165 AP/T-D 170 BB-D 175 YD-S 180 STE 17 081813 2 17 23 9 22 M12 M12 x 30 70 STE 17-1 081814 2 17 21,5 9 19 M12 M12 x 30 STE 17-2 73062150 1 17 20,5 7,5 23 M12 M12 x 25 70 FK-D 210 A-D 210 AL-D 210 B-D 210 BD-FC 210 RC-D 210 BB-D 210 PB-D 210 PBI-D 210 B-D 210 YD-S 210/226 AP-D 215 T-D 215 STE 17-3 18062632 1 17 20,5 7,5 30 M12 M12 x 25 70 AP/T-D260 STE 21 081815 2 21 27 11 28 M16 M16 x 35 150 STE 21-2 73063050 1 21 26,5 10 30 M16 M16 x 30 150 FK-D 260/315 FK-M 315 A/AL/B/BB/B/PB/PBI-D 250/315 STE 21-3 034148 1 21 26,5 10 28 M16 M16 x 30 150 A/AL/B/BB/PB/PBI-M 315 AP/APL/T-D 315 AP/APL/T-M 315 YD-S 250/315 RC-D 250/305 RC-M 305 BD-FC 250/315 BM-FC 315 STE 25,5 081817 2 25,5 29 11 35 M20 M20 x 40 300 FK-D 400 FK-M 400 STE 25,5-1 73065030 1 25,5 33 14,5 38 M20 M20 x 40 300 RC-D 500 AP-D 400 APL-D 400 T-D 400 60 SMW-AUTOBLOK

b version 1 iplease observe! Always tigten T-nuts wit a torque wrenc. SMW Forkardt Scunk FK 160/200 FKS 160/200 KDV 160/200 KDV 250 KDV 160/200 KDV 250 KFV 160/200 KFMF 160/200 2 BLE-PS 160/200 2 BLEF 200 KL/KT/KT/KT/KS-PS 160/200 KSF 175/200 KSKL 250 Mo K/KF/KT 160/175/200 KS 160/200/250 K/KP 200 /F 160/175/200 QLK/QLC 160/175/200 QLK/QLC-KS 200/250 QLK/QLC-LS 160/200 QLC-A 200 UVE 160/200/250 SL 165/210 T 165/210 TF 165/210 ROTA C-D 200 S 200 S 250 ROTA C/CF Plus 165 T-nuts grippers ROTA C/CF Plus 215 ROTA CO 210 ROTA CD 185 ROTA CK Plus 210/250 ROTA CF 165/210 ROTA C 165/210 ROTA 2B 160 FK 250/270 FK 315 FKS 250/315 KDV 315/400 KDV 315/400 KZF 200 KZF-ES 200 KFMF 250/315 KFV 250/315 3 250-315 3 F 250-315 KT 250-315 KS 250-315 KSF 250-315 3 KTF 250-315 K 250-315 KP 250-315 KLC 250-315 KL 250 KSPS 250-300 3 F 290 KS 315-400 KS 400 KSF 400 UVE 315 3 D 400 (Index) 2 BLE 200 2 BLE 250 Mo QLK/QLC 250/315 QLK/QLC-KS 315/400 QLK/QLC-LS 250/315 QLC-A 250/315 SL 250/315 ROTA C-D 250 ROTA C-O 250 T 250/315 TF 250/315 S 315 ROTA C-D 315 ROTA C-O 315 ROTA CF 315 ROTA C 315 ROTA CO 260/315 ROTA 2B 200 ROTA C 250 ROTA CF 250 ROTA C Plus 260/315 ROTA CK Plus 315 ROTA CF Plus 260/315 SL 400 ROTA C-D 400/500 ROTA C-F 400/500 T 400/500 TF 400/500 ROTA 2B 250/315/400 FK 400/500 FKS 400/500 KDV 500 KDV 500 KDS 630 KZF 250 KZF-ES 250 KZF 315 KZF-ES 315 KZF 400 KZF 400-800 3 400-500-630 3 F 400-500-630 3 KTF 400-500 UVE 400-500-630-800 KT 400-500 K 400-500 KL 400-500 KLC 400-500 KP 400 KS 500-630 KS 500 KSL 630 KSF 630 KL 300 KSF 560 2 BLE 250 2 BLE 315 2 BLE-PS 300 2 BLE-PS 315 2 BLE 400 2 BLE 500 2 BLE-PS 400-500 QLC 400 QLK 400 SMW-AUTOBLOK 61

double T-nuts STE-M for base jaws wit METRIC serration K b quenced and ground incl. screw DI 912 12.9 version 1 Type vers. b screw torque SMW-AUTOBLOK DI 912 Md max. (m) STE-M 105 091508 2 10 15 5 14 M8 M8 x 20 30 STE 12-1 12061200 1 12 15 6,5 16 M8 M8 x 20 30 A-M 125 AL-M 125 STE 12 12061300 2 12 15 6,5 16 M8 M8 x 20 30 B-M 130 BB-M 140 B/PB-M 130 STE-M 120 73061602 1 12 18,5 6,5 20 M10 M10 x 20 50 A-M 165 AL-M 165 B-M 165 BM-FC 165 RC-M 165 PB-M 165 PBI-M 165 B-M 165 BB-M 175 AP/T-M 170 STE-M 121 081833 2 12 22 7 20 M10 M10 x 25 50 STE-M 125 012534 2 12 18,5 7,5 20 M10 M10 x 25 50 STE-M 140 73062101 1 14 20,5 7,5 25 M12 M12 x 25 70 A-M 210 AL-M 210 B-M 210 BM-FC 210 RC-M 210 PB-M 210 PBI-M 210 B-M 210 BB-M 210 AP/T-M 215 APL-M 215 STE-M 141 081834 2 14 24,5 8,5 25 M12 M12 x 35 70 STE-M 145 012535 2 14 20,5 8,5 25 M12 M12 x 30 70 STE-M 160 73062501 1 16 26,5 10 30 M12 M12 x 30 70 A-M 250 AL-M 250 B-M 250 BM-FC 250 RC-M 250 PB-M 250 PBI-M 250 B-M 250 BB-M 250 STE-M 160-1 18062633 1 17/16 20,5 7,5 30 M12 M12 x 30 70 AP/APL-M 260 T-M 260 STE-M 161 080547 2 16 24,5 8,5 30 M12 M12 x 35 70 STE-M 162 081835 2 16 23 8 30 M12 M12 x 30 70 STE-M 165 012546 2 16 21,5 8,5 30 M12 M12 x 30 70 STE-M 167 081836 2 16 26,5 8,5 25 M12 M12 x 35 70 STE-M 181 081837 2 18 33,5 13,5 30 M14 M14 x 45 130 STE-M 187 019359 2 18 27,5 9,5 30 M14 M14 x 40 130 STE 21-2 73063050 1 21 26,5 10 30 M16 M16 x 30 150 A/AL/AP/APL/T/B/BB-M 315 PP/B/PBI-M 315 BM-FC 315 RC-M 305 STE-M 220 12064520 2 22 33 14,5 38 M20 M20 x 40 150 AP/APL/T-M 400 BM -FC 400 STE-M 212 081839 2 21 28 11,5 30 M16 M16 x 40 150 STE-M 213 236521 2 21 23 11,5 30 M16 M16 x 35 150 STE-M 227 081842 3 22/24 45,5 16,5 43 M20 M20 x 60 300 STE-M 22 12064020 3 25,5/2234,5 15 M20 M20 x 40 300 A-M 400 AL-M 400 B-M 400/450 62 SMW-AUTOBLOK

b b version 2 version 3 1 owa Kitagawa Scunk B204 B205 O 1 MA 6 O 7 MA 6 O 24 M 6 O 27 M 6 JA 5-6 O 6-160 OS 6 O 06 160 SL 165 (1,5 x 60 ) O 15 M 6 O 22 M 6 O 47 M 6 O 37 M 6 B 06 06 B-160 OB 6 AS 165 O-160 ROTA C/CF 165 B-206 B 06 B 106 B 07 O 106 O 06 ROTA CK 165 ROTA CK Plus 165 BB 06 BB 206 O 206 O 1 MA 8 O 2 MA 8 O 23 M 8 O 7 M 8 JA 6-8 O 8 O 08-200 OS 8 B 08 SL 210 (1,5 x 60 ) O 15 M 8 B-200 OB 8 AS 210 O-200 08 200 ROTA C/CF 210 B-208 B 108 O 108 O 208 B 208 BB 208 BB 08 T-nuts grippers B-250 AS 250 OS 10 B 10 AS 250 SL 250 (1,5 x 60 ) OB-10 O-10 JA 8-10 O 250 10 250 ROTA C/F 250 O 1 MA 10 O 2 M 10 B-110 O 110 B-210 O 210 BB 210 BB 10 ROTA CK 250 ROTA CK Plus 250 O 7 MA 10 O 15 M 10 O 22 M 8 O 47 M 8 O 23 M 10 O 27 M 8 O 24 M 8 O 37 M 8 O 1 MA 12 O 2 M 12 B-300 O-12 O-300 OS 12 B 12 12 ROTA C/CF 315 O 12-300 OB 12 LA 6-12 LA 6-15 LA 8-12 JA 8-15 O 7 MA 12 O 22 M 10 O 23 M 12 SL 315 O 37 M 10 O 27 M 10 O 24 M 10 O 15 M 12 O 47 M 10 B 212 O 212 B-112 O 112 ROTA CK 315 ROTA CK Plus 315 ROTA CD 315 ROTA C/CF Plus 315 BB 212 B-380 B-15 B-18 B-450 O 380 SL 400 O-18 OB-15 OB 18 O 15 ROTA C/CF 400 iplease observe! Always tigten T-nuts wit a torque wrenc. SMW-AUTOBLOK 63

T-nuts Berg TS - T-nut bolts SW TM - slotted nuts Type SW torque cuck Md max. (m) TS 10 087409 10 20,3 9,3 M10-60 K 140 TM 10 087405-16 - M10 8,1 60 K 160 TS 12 087410 12 23,2 9 M12-100 K 175 TM 12 087406-19 - M12 10,1 100 K 200 TS 16 087411 16 26,7 12 M16-250 K 250 TM 16 087407-25 - M16 14,1 250 K 315 iplease observe! Always tigten T-nuts wit a torque wrenc. 64 SMW-AUTOBLOK

Dataseet / order form special T-nuts Existing top jaws can be adapted to different cucks by using stepped T-nuts. Fill in te requested data and send wit te inquiry or te PO. T-nuts type SO 10 Simply copy and fax to 07542/3886 or fill in at www.smw-autoblok.de A B 1 T T-nuts type SO 20 A B T-nuts grippers 1 T T-nuts type SO 30 A B 1 T SMW-AUTOBLOK 65

Part Ø D grippers UE M DS UE 10 081845F, special steel ardened Te universal gripper wit unique features (patented): For flat and round clamping surfaces For external and internal gripping Front mounting of bolts ripper seat, round or flat, and tread is easy to produce ardening of gripper seat necessary Torx screw driver Id. o. 085961 Torx screw M4 x 13.5 Id. o. 033010 Parts included: ripper wit Torx screw Mounting instruction: 1. Part Ø D + 6 mm (0.23 inc) + workstop + slot as to be turned or milled. Please note corrected dimensions according to sketc. 2. Drill and tap 3. arden jaw D + 6 +0,1 +0,1 +0,5 UE 20 087414, special steel ardened UE 21 233348 (grip insert wit one row of teet) Te gripper wit te unique sape (patented): Pull-down effect by wedge sape design Can be used for self-centering or swivelling ripper seat: Milling, drilling and tapping can easily be macined wit te inclined milling tool o ardening of jaws necessary For external or internal clamping ead socket screw M4 x 12 DI 912, Id. o. 010145 Parts included: ripper wit ead socket screw M4 x 12 DI 912 Mounting instruction: 1. Part Ø D + 4 mm (0.16 inc) + workstop turning or milling 2. Milling of pocket + drilling and tapping 16 + 0,1 10 Inclined milling tool SS 033611 Inclined milling tool Solid Carbide 138711 12 M4 ø 16 Clamping Ø D D ød+4 ød+11 ød+14 12 8 10 D+4 66 SMW-AUTOBLOK

Te economical solution: Rouging jaws wit excangeable grippers: Made from standard SMW-AUTOBLOK jaws. Economical, because only te worn out gripper is canged in seconds. Extended life compared to standard rouging jaws. Features: Safe gripping of roug material/forgings/castings made from standard or ig tensile strengt material. Increased gripping allows eavier cuts. Fast cange of worn out grippers. UE 30 089822, Solid Carbide Parts included: ripper wit Torx screw ripper for prism jaws and fixtures (patented): For external and internal gripping of rectangular parts For cuck jaws, fixture jaws and fixtures Front mounting of bolt ripper seat: drilling and tapping can easily be done. Bottom of seat can be eiter 120 (standard drill tool) or flat For ig production ardening of gripper pocket recommended Torx screw driver Id. o. 085961 Torx-screw M4 x 13,5 033010 Mounting instruction 1. Drilling 12.7 Ø bottom of seat 120 or flat 2. Tapping of tread prism jaws vice optional T-nuts grippers M, SS ardened Clamping points for jaws For external and internal gripping Increasing gripping allows for eavier cuts Rear mounting of bolts Point seat can easily be macined: drilling only Parts included: ardened point witout screw Mounting instruction: Type M 6 M 8 M 10 M 12 081851 087805 081852 081853 D mm 6 8 10 12 L mm 10 12 14 16 mm M3 M4 M5 M6 A mm 6 8 10 11 B mm 3.4 4.5 5.5 6.6 C mm 9 9 9 11 T mm 7.5 8.5 9.5 10.5 R mm 0.3 0.5 0.5 0.5 screw DI 912M3 x 14 M4 x 14 M5 x 14 M6 x 16 C *T±0,1 *equal per set witin 0,1 mm R max. ØA soft jaws Ø D ard jaws Ø D ØB +0,05 0 +0,07 0,02 SMW-AUTOBLOK 67

rippers UE M DS DS-R Solid Carbide soldered in ød rippers for jaws, fixtures and so on For o.d. gripping Increase of te transmittable torque on raw or macined work pieces Rear mounting treads or side gaces for locking Te pocket can easily be macined DS-Q Solid Carbide soldered in D D Type Id.-r. D max. Einbauempfelung rec. mounting Belastungskraft load force F 1) F 1) Borungs-Ø bore-ø + 0,05 + 0,05 Borungstiefe bore dept DS-R 10 081846 10 10 M5 800 da 10 9,0 DS-R 11 081847 12,7 9,5 M5 1100 da 12,7 8,5 DS-R 12 081848 12,7 12,7 M6 1100 da 12,7 11,5 DS-R 13 081849 15,8 9,5 M6 2000 da 15,8 8,5 DS-R 14 081850 19 9,5 M6 3000 da 19 8,5 DS-Q 15 033058 12,7 9,5 M6 2000 da 1 ) Values valid only if all tips are engaged. 68 SMW-AUTOBLOK

Precision gripper inserts 14 und 25 wit pull down 14 + 25 -gripper caracteristics Type grippers ave a stop surface for a controlled penetration of te grip toot Te workpiece is clamped concentric on te stop surface, so tat te clamping dia. and te macining dia. are concentric of te grip toot Te ig precision of te gripper guarantees concentricity even after replacing worn out grippers igest torque transmission is guaranteed wit te combination of friction and positive drive Te geometry of te gripper creates a pull down effect on te workpiece TI coated ig speed steel for long life Stop surface You can select te corresponding gripper for all applications according to te grindstock allowance ripper wit controlled penetration 0.070 0.30 mm are standard Special grippers are available on request 14 (ligt duty version) material: SS 14 t Mounting dimension Dimension to be witin + 0,01 to tongue and groove/fine serration T-nuts grippers 14 12 6 Measured into sarp corner ripper 14 fitted witout clearance SMW-AUTOBLOK Type 14-070 14-100 14-125 14-150 14-175 14-200 0.07 0.10 0.125 0.15 0.175 0.20 235615 235616 235617 235618 235619 235620 ø11 carbide milling tool 139528 85 ø12 25 (eavy duty version) material: SS 19.3 t Mounting dimension Dimension to be witin + 0,01 to tongue and groove/fine serration 15.8 10 Measured into sarp corner ripper 25 fitted witout clearance SMW-AUTOBLOK Type 25-100 25-150 25-200 25-250 25-300 0.10 0.15 0.20 0.25 0.30 232704 231275 231276 231277 231278 ø15,6 carbide milling tool 139540 85 ø16 SMW-AUTOBLOK 69

Precision gripper inserts 15 und 30 for igest torque transmission 15 + 30 -gripper caracteristics Type grippers ave a stop surface for a controlled penetration of te grip toot Te workpiece is clamped concentric on te stop surface, so tat te clamping dia. and te macining dia. are concentric Te ig precision of te gripper guarantees concentricity even after replacing worn out grippers igest torque transmission is guaranteed wit te combination of friction and positive drive TI coated ig speed steel for long life t You can select te corresponding gripper for all applications according to te grindstock allowance Ø d ripper wit controlled penetration 0.15 0.30 mm are standard Special grippers are available on request 15 (ligt duty version) material: SS 14 15 t 12 6 15-150 15-200 15-250 17-21 0.15 0.20 0.25 235621 235622 235623 15-150 15-200 15-250 22-27 0.15 0.20 0.25 237762 237763 237764 15-150 15-200 15-250 28-34 0.15 0.20 0.25 235624 235625 235626 Mounting dimension Dimension to be witin + 0,01 to tongue and groove/fine serration 15-150 15-200 15-250 35-42 0.15 0.20 0.25 237765 237766 237767 15-150 15-200 15-250 43-53 0.15 0.20 0.25 235627 235628 235629 Measured into sarp corner ripper 15 fitted witout clearance 15-150 15-200 15-250 54-78 0.15 0.20 0.25 237400 237401 237402 15-150 15-200 15-250 79-175 0.15 0.20 0.25 237409 237410 237411 ø11 carbide milling tool 139528 85 ø12 70 SMW-AUTOBLOK

Precision gripper inserts 30 for igest torque transmission 30 (eavy duty version) material: SS R8.1 8.5 10.3 M4 10.2 (19.3) 19.3 15.8 10 t Mounting dimension Ø d t Dimension to be witin + 0,01 to tongue and groove/fine serration T-nuts grippers0 Measured into sarp corner (16.2) ripper 30 fitted witout clearance 8 11 10 (0.6) 30-200 30-250 30-300 24-32 0.20 0.25 0.30 237841 237842 237843 ø15,6 carbide milling tool 139540 ø16 30-200 30-250 30-300 33-42 0.20 0.25 0.30 233481 233482 233483 85 30-200 30-250 30-300 43-52 0.20 0.25 0.30 233421 233422 233423 30-200 30-250 30-300 53-64 0.20 0.25 0.30 233485 233486 233487 30-200 30-250 30-300 65-84 0.20 0.25 0.30 234811 234812 234813 30-200 30-250 30-300 85-119 0.20 0.25 0.30 237291 237292 237293 30-200 30-250 30-300 120-174 0.20 0.25 0.30 237299 237300 237301 30-200 30-250 30-300 175-335 0.20 0.25 0.30 237422 237423 237424 SMW-AUTOBLOK 71