Lampholders Lampholders for halogen lamps - TECHNICAL CHARACTERISTICS Conformity to Standards 02370 EN 60838-1 Standard Conformity to Standards LV Directive EN 60838-1 Standard Dimensions (in mm) ø 17 32 9 02370 02375 ø 28 7,5 23,3 40 1 92 1 92 ø 4,5 65 65 ø 4,5 02376 ø 34 02378 ø 18 02380 02381 17,5 31,5 20,4 115 ø 7,2 68 24 24 151 ø 7,2 68 02396 02390 02391 820
Lampholders for halogen lamps Lampholder for extra low voltage halogen lamps 02370 8 A 24 V lampholder for halogen lamps with cap G4 - G5.3 - GX5.3 - G6. - GY6. - 0 mm PTFE teflon cable 0.75 mm 2. Rated operating temperature: the lampholder 270 C, the cable 180 C. Fixing holes ø 3.3 mm, fixing centres 11.5 mm, body ø 17 mm 02370 Lampholder for mains voltage halogen lamps 02375 2 A 250 V, for halogen lamps with G9 fitting, double wire clamp springs for flexible cables with max ø 1,8 mm contact pins, throughholes for M3 screws, M10x1 nipple. For II class lighting components. Rated operating temperature 270 C max 02376 Shade-holder ring for 02375 lampholder 02378 2 A 250 V, for halogen lamps with fitting, double wire clamp springs for flexible cables with max ø 1,8 mm contact pins, through-holes for M3 screws, M10x1, nipple. For II class lighting components. Rated operating temperature 270 C max 02376 02375 02378 Lampholder for mains voltage halogen lamps 02380 8 A 250 V steatite body lampholder, for halogen lamps R7s rating 0-500 W, 200 mm PTFE teflon cable 0.75 mm 2 - median fixing bracket. Rated operating temperature: the lampholder 0 C and the cable 250 C. Fixing bracket with ø 4.5 mm central hole and 4.5x9.5 mm slots, 65 mm fixing centres 02381 R7s rating 0-500 W, 200 mm PTFE teflon cable 0.75 mm 2 - U shaped fixing bracket. Rated operating temperature: the lampholder 0 C and the cable 250 C. Fixing bracket with ø 4.5 mm central hole and 4.5x9.5 mm slots, 65 mm fixing centres 02390 6 A 250 V cylindrical steatite lampholder, nickel-plated brass casing, for halogen lamps with cap R7s rating 150-250 W, 250 mm PTFE teflon cable 0.75 mm 2 - straight fixing bracket. Rated operating temperature: the lampholder and the cable 250 C. Fixing bracket with ø 7.2 mm central hole and 4.5x7 mm slots, 68 mm fixing centres 02391 6 A 250 V cylindrical steatite lampholder, nickel-plated brass casing, for halogen lamps with cap R7s rating 0-500 W, 250 mm PTFE teflon cable 0.75 mm 2 - straight fixing bracket. Rated operating temperature: the lampholder and the cable 250 C. Fixing bracket with ø 7.2 mm central hole and 4.5x7 mm slots 68 mm fixing centres 02380 02381 02390 02391 Lampholder for mains voltage halogen lamps 02396 10 A 250 V metal lampholder, fixing base and steatite contact carrier, for halogen lamps R7s rating up to 1500 W, 0 mm PTFE teflon cable 1.5 mm 2. Rated operating temperature: the lampholder 0 C, the cable 250 C. Fixing holes ø 3.3 mm, fixing centres 28 mm ACCESSORIES 02396 8
Lampholders Lampholders for fluorescent lamps - TECHNICAL CHARACTERISTICS 02405 - Mounting Lampholders for fluorescent tubular lamps 19,5 0,2 9,7 0.2 L+18 Technical specifications insulating self-extinguishing materials, complying with Italian Standard CEI 50-11 (IEC 695-2-1, IEC 695-2-2): - parts necessary to retain current-carrying parts in positions, needle-flame test t a 10 s - parts only used as enclosure, Glow Wire test: 650 C Thickness of the fitting 0,5 mm to 1 mm Conformity to Standards LV Directive EN 60400 Standard 02463-02464 - Mounting 3,5 0.2 4 0.1 25,5 0.2 25 0.2 11 0.1 23 0.2 L-4 02473-02474 - Mounting 4,5-0.2 0 6,7 0.1 25,5 0,2 25 0.2 13,3 0.2 23 0.2 L-4 Thickness of the fitting 0,5 mm to 2 mm 02445-02446 - Mounting L+ L-4 20 02445 02446 02445 02446 ø Inflexible support ø 18 min flexible support L-4 min L+22 822
Lampholders for fluorescent lamps Lampholders for G5 fluorescent tubular lamp 02405 2 A 250 V lampholder, snap fixing, screwless terminals for rigid and flexible conductors 0,5 mm 2 to 1 mm 2, brass contacts, rated operating temperature 110 C, white 02405 Lampholders for G13 fluorescent tubular lamp 02463 2 A 250 V inflexible lampholder, rotor type, brass contacts, screw fixing, screw terminals, rated operating temperature 80 C, white 02464 2 A 250 V inflexible lampholder, rotor type, with starter holder, brass contacts, screw fixing, screw terminals, rated operating temperature 80 C, white 02463 02464 Lampholders for G13 fluorescent tubular lamp 02473 2 A 250 V inflexible lampholder, rotor type, with stop, for rigid and flexible conductors 0,5 mm 2 to 1 mm 2, brass contacts, snap fixing, screwless terminals, rated operating temperature 0 C (Tm 110 C), white 02474 2 A 250 V inflexible lampholder, rotor type, with stop and starter holder, for rigid and flexible conductors 0,5 mm 2 to 1 mm 2, brass contacts, snap fixing, screwless terminals, rated operating temperature 0 C (Tm 110 C), white 02473 Round lampholder for G13 fluorescent ubular lamps 02445 2 A 250 V inflexible round lampholder, rotor type, screw fixing, screw terminals, rated operating temperature 80 C, patented, white. ø 4.3 mm fixing holes, 26 mm fixing centres 02446 2 A 250 V flexible round lampholder, rotor type, screw fixing, screw terminals, rated operating temperature 80 C, patented, white Fixing through spring eyelets - ø 3.5 mm holes, 26 mm fixing centres 02474 ACCESSORIES 02445 02446 823
39 Lampholders Lampholders for fluorescent lamps - TECHNICAL CHARACTERISTICS Conformity to Standards 02418-02438 - 02439-02495 LV Directive EN 60400 Standard Dimensions (in mm) 58 76 40 68 50 02463 02464 02473 29 24 02474 22 51 22 12 13 19 13,5 02446 ø 33 02418 17,5 02437 02437.F 02438 40 13,5 ø,2 ø 10,2 29 02439 02495 36 025 39 02515 16 34 16 23 47,5 02582 70 02633 23 02634 20 Accessories for lampholders for G13 fluorescent tubular lamps 02487 Two screws (1/8 x25 + 1/8 x) and relevant fixing nuts 02488 Two screws 1/8 x25 and relevant fixing nuts 02487 02488 Lampholder for G10q fluorescent circular lamps 02418 2 A 250 V push-fit lampholder for building-in, 4 conductors H05V-U 0.75 mm 2, cm length, rated operating temperature 110 C, white 02418 824
Starter holder - screw fixing - screw terminals *02437.F 2 A 250 V starter holder, zinc-plated steel contacts, rated operating temperature 80 C, white. ø 3.2 mm diagonal fixing holes, 34 mm fixing centres *02437 2 A 250 V starter holder, brass contacts, rated operating temperature 80 C, white. ø 3.2 mm diagonal fixing holes, 34 mm fixing centres 02438 2 A 250 V starter holder, brass contacts, rated operating temperature 80 C, white. Fixing holes: ø 3.2 mm at centres, ø 3.2 mm on the major axis, 31 mm fixing centres Lampholders for fluorescent lamps 02437.F 02437 02438 Starter holder - screw fixing - screwless terminals 02439 2 A 250 V starter holder, brass contacts, screwless terminals for rigid and flexible conductors 0,5-1 mm 2, rated operating temperature 110 C, white. ø 3.5 mm diagonal fixing holes, 31 mm fixing centres 02439 Starter holder for G23 fluorescent single-ended compact lamps 02495 2 A 250 V lampholder for single-ended compact fluorescent lamps G23 5-11 W, screw fixing, screwless terminals for rigid and flexible conductors 0.5 mm 2 to 1 mm 2, rated operating temperature 0 C, white 02495 Accessories 025 E screw shell with fixing lugs, nickel-plated brass. To be completed with insulating protections against contacts with live parts. Suitable for SELV applications 02515 E10 screw shell with fixing lugs, nickel-plated brass. To be completed with insulating protections against contacts with live parts. Suitable for SELV applications 02582 Shade-holder ring for E27 lampholder. To be completed with insulating protections against contacts with live parts 02591 M10x1 suspension nipple, polyamide 02633 Socket outlet safety cap 2x10 02634 Socket outlet safety cap 2x16 ACCESSORIES 025 02515 02582 02591 02633 02634 * Only for Countries not members of the EU Available until stocks last 825