W Flexibility Professional Inground LED Fixture Concept: Professional addressable DMX 512 controlled RGBW LED fully adjustable inground recessed LED fixture. Housing: 8 tall x 11 diameter die-cast aluminum housing. Materials: Anodized powder coated black die-cast aluminum heat sink. PVC installation sleeve and stainless steel (AISI316L) trim ring with extra clear glass (antislip glass available). Trim: Stainless steel (AISI316L) ultra flat round decorative ring, with straight edge in brushed natural, bronze or black finishes. Features tamper-proof Torx screws. Optic: Zoom optical system which slides and locks on vertical axis according to four different positions to provide four different beam spreads; 19, 26, 42 and 64 beam spreads. Light beam can be adjusted horizontally 0.7 from center to change adjacent illumination pattern by 20 narrow and 359 on the horizontal plane with integral locking system. Mounting: Flush and semi-flush installation sleeves with stainless steel extension sleeve or optional raised installation tube for landscape. Fixture includes screw down holes and stainless steel screws for attachment to installation sleeve. Includes optional stainless steel L brackets to support mounting, installation sleeve required for flush or semi-flush mounting (sold separately). Driver: Universal voltage integrated IP68 electronic driver complete with watertight IP68. Installation: Fixture flush mount installation includes tall x 11 diameter sleeve, extension sleeve for wire slack and accessibility. Fixture is provided with 6ft IP68, direct burial brass ingrade jbox (required, sold separately). Wattage: Max 48W with full color operation. Color Temperature: RGBW Lumen Maintenance (L70): 50,000hrs Calculation for LED fixtures are based on measurements that comply with with IES LM-80. Voltage: Universal Voltage 120-277V AC 50/60Hz IP Rating: IP68**, IP69* Load Rating: Resistant to static loads up to 20KN in flush mounted cement and pavement installations. Certifications: culus Wet Listed E477426 Tested in accordance with LM-79-08 A Title 24 commercial installation compliant. Warranty: 5 year limited warranty * Up to 1 METER DEPTH of water for up to a maximum of 30 MINUTES ** Not suitable for submersible installations KEPLERO Zoom RGBW with Clear Lens CALIFORNIA T24 COMPLIANT Delivered Lumens: RGBW Full Color Spot 19º = 832Lm Flood 26º = 1086Lm Medium Wide Flood 42º = 1362Lm Wide Flood 64º = 1403Lm A Drive Over IP67 IP68 359º 0.7 Cool Touch PRODUCT CODE TYPE WATTAGE COLOR TEMP + TRIM & MOUNTING + CONNECTION KPL KEPLERO ZM Zoom L1 48W RGBW RGBW Required (See Pg 2) Required (See Pg 3) Views 011.00 8.00 08.27 Targetti USA - A Targetti Group Company - 750-A W. 17 th St. Costa Mesa, CA 92627 - Phone (714) 513-1991 - Email: targettiusa@targetti.com - www.targetti.us - 10.07.18 - Page 1 of 6
TRIM RING (REQUIRED) - CHOOSE 1 INSTALLATION ACCESSORIES: 1E2325 1DU2325A 1DU2325B Round brushed natural stainless steel (AISI316L) decorative ring. 10mm thick extra clear protective glass. Silicone gasket. Tamper proof (AISI316L) Torx screws. Round brushed natural stainless steel (AISI316L) decorative ring with anti-slip glass. 10mm thick extra clear protective glass. Silicone gasket. Tamper proof (AISI316L) Torx screws. Round brushed bronze stainless steel (AISI316L) decorative ring. 10mm thick extra clear protective glass. Silicone gasket. Tamper proof (AISI316L) Torx screws. 1E2495 1E2496 1E0388 Direct burial brass ingrade j-box. Features stainless steel cover screws and strain relief for power cord, (2) 3/4 NPT bottom holes and (2) 3/4 NPT side holes. Includes (4) 3/4 to 1/2 adaptors and (2) 1/2 NPT plugs. (REQUIRED) Anti-vandal torx head. Suggested one per 5 fixture. Fixture metal maintenance removal handle. Helpful one per 10 fixtures. Glass suction removal tool. Helpful one per 20 fixtures. 1DU2325BA 1DU2325K 1DU2325KA Round brushed bronze stainless steel (AISI316L) decorative ring with anti-slip glass. 10mm thick extra clear protective glass. Silicone gasket. Tamper proof (AISI316L) Torx screws. Round brushed black stainless steel (AISI316L) decorative ring. 10mm thick extra clear protective glass. Silicone gasket. Tamper proof (AISI316L) Torx screws. Round brushed black stainless steel (AISI316L) decorative ring with anti-slip glass. 10mm thick extra clear protective glass. Silicone gasket. Tamper proof (AISI316L) Torx screws. INSTALLATION SLEEVE (REQUIRED) - CHOOSE 1 OPTICAL ACCESSORIES: Maximum of one optical filter or louver accessory per fixture. 1T1696 1T1699 1E2402 Parallel ribbed glass light blade filter. This makes the beam take on an oval shape and when combined with spotlights, the light blade appears more prominent. Diameter 3.98". Anti-glare grid. Black lacquered metal honeycomb structure. Diameter 3.98". Half Moon Anti glare shutter. Black finish. Can be used as one per fixture with a filter or louver, not considered as part of the maxiumum optical accessories. 1DU2394 1DU434336 1DU434318 1DU434312 Installation sleeve for concrete pour applications. Grey Nylon casing with 4.5 aluminum extension sleeve. Complete with dedicated cover cap for installations in concrete. Round ring for flush or semi-flush installations. Raised installation sleeve for landscape applications. 36 H black stainless steel, includes inner sleeve. (Field cuttable. Used for fixture elevation 21 above ground). Not suitable with 1DU2394. Raised installation sleeve for ground cover (succulents and low level planting) applications. 18 H black stainless steel, includes inner sleeve. (Field cuttable. Used for fixture elevation 3 above ground). Not suitable with 1DU2394. Raised installation sleeve for turf applications. 12 H black stainless steel, includes inner sleeve. (Field cuttable. Used for fixture elevation 3 above ground). Not suitable with 1DU2394. Trim Ring 1DU2394 1T1696 1T1699 1E2495 1E2402 1E2496 1E0388 Targetti USA - A Targetti Group Company - 750-A W. 17 th St. Costa Mesa, CA 92627 - Phone (714) 513-1991 - Email: targettiusa@targetti.com - www.targetti.us - 10.07.18 - Page 2 of 6
Wiring Diagram DMX Connection Box 1DU2531 1 each 5 pin male connector to fixture 1 each 3 socket male connection for DMX input 1 each 3 pin male connection for DMX DMX Connection Box 1DU2531TERM 1 each 5 pin male connection to fixture 1 each 3 socket male connection for DMX input DMX Jumper Factory manufactured to required length with 1 each 3 socket female connection for DMX output 1 each 3 pin male connection for DMX input CONNECTION BOXES (REQUIRED) DMX IP68 I-connector standard 1½ x 3 x 1½ box with 3 IP68 female 5-pin connector cord (to fixture) IP68 male 3-pin connector (DMX In) IP68 female 3-pin connector (DMX Out) 1 per fixture assuming no series of more than 20 fixtures. DMX IP68 T-connector (buffered). 1½ x 3 x 1½ box with 3 IP68 female 5-pin connector cord (to fixture) IP68 male 3-pin connector (DMX In) IP68 female 3-pin connector (DMX Out). Required for fixtures in series of more than 30 fixtures. DMX IP68 End connect for 1½ x 3 x 1½ box with 3 IP68 female 5-pin connector cord (to fixture) IP68 male 3-pin connector (DMX In). Required for end of run fixtures. 1DU2531 1DU2531BUFF 1DU2531TERM CONNECTION CABLES (REQUIRED) 1DU2533LEAD 15 1 1DU2533 05 2 DMX IP68 Connector lead, 15ft direct burial cable for fixture to controller lead wire connection with IP68 female 3 socket connector (DMX out) bare wire at opposite end for DMX in controller connection. DMX IP68 Connector cord, 5ft direct burial Belden cable for fixture to fixture DMX data connection with IP68 male 3 socket connector (DMX In) and IP68 female 5 pin connector (DMX Out). 1 Additional lead cables sold in 5 foot increments, from 15 foot (1DU2533LEAD 15) to 120 foot (1DU2533LEAD 120). 2 Connector cords sold in 5 foot increments, from 5 foot (1DU2533 05) to 20 foot (1DU2533 20). Wall Touch Controller (Optional) Product Code Type Application Voltage Listing Dimensions Number of DMX Channels Number of areas Number of scenes TGDMXSLESAU9 Stand Alone DMX Programmable Controller with Easy to Use Software Interface Indoor 5.5V DC ETL, UL 5.30 W X 5.50 H X 1.90 D 256 1 20 TGDMXSLESAU9 Targetti USA - A Targetti Group Company - 750-A W. 17 th St. Costa Mesa, CA 92627 - Phone (714) 513-1991 - Email: targettiusa@targetti.com - www.targetti.us - 10.07.18 - Page 3 of 6
Installation Diagram - Concrete Pour Application Flush Mount Assembly 1DU2394 11.00 Finish Grade installation sleeve 13.5 12 8.50 4.5 Aluminum J-box extension sleeve Semi-Flush Mount Assembly 1DU2394 11.00 Beveled trim ring 0.08 H installation sleeve Finish Grade 13.5 12 8.50 4.5 Aluminum J-box extension sleeve Targetti USA - A Targetti Group Company - 750-A W. 17 th St. Costa Mesa, CA 92627 - Phone (714) 513-1991 - Email: targettiusa@targetti.com - www.targetti.us - 10.07.18 - Page 4 of 6
KEPLERO ZOOM RGB Installation Diagram - Landscape Application RAISED TUBE INSTALLATION ASSEMBLY RAISED TUBE INSTALLATION ASSEMBLY Recommended for Landscape Installation Recommended for Ground Cover Installation 1DU434336 1DU434318 7 Installation Grade 18.00 in 11 Min. Installation 21 36.00 in Body RAISED TUBE INSTALLATION ASSEMBLY Recommended for Turf Installation Grade 1DU434312 3 ody Grade 15 Min. Installation 12.00 in Min. eeve Targetti USA - A Targetti Group Company - 750-A W. 17th St. Costa Mesa, CA 92627 - Body Phone (714) 513-1991 - Email: targettiusa@targetti.com - www.targetti.us - 10.07.18 - Page 5 of 6
Photometry Spot Polar Graph Cone of Light Fixture Output 832Lm ftcd ftcd Kelvin Temp RGBW 10.00 43 28 Beam Spread SP 19º 8.00 67 44 IMax 5165cd/klm 6.00 119 78 Efficacy 17 Lm/W 4.00 267 176 2.00 1057 703 Flood Polar Graph Cone of Light Fixture Output 1086Lm ftcd ftcd Kelvin Temp RGBW 10.00 32 19 Beam Spread FL 26º 8.00 49 30 IMax 2920cd/klm 6.00 88 53 Efficacy 23 Lm/W 4.00 198 120 2.00 791 480 Medium Wide Flood Polar Graph Cone of Light Fixture Output 1362Lm ftcd ftcd Kelvin Temp RGBW 10.00 19 11 Beam Spread MWFL 42º 8.00 29 17 IMax 1380cd/klm 6.00 52 30 Efficacy 28 Lm/W 4.00 117 67 2.00 459 266 Wide Flood Polar Graph Cone of Light Fixture Output 1403Lm ftcd ftcd Kelvin Temp RGBW 10.00 11 5 Beam Spread WFL 64º 8.00 17 8 IMax 767cd/klm 6.00 30 14 Efficacy 29 Lm/W 4.00 67 32 2.00 269 128 Targetti USA - A Targetti Group Company - 750-A W. 17 th St. Costa Mesa, CA 92627 - Phone (714) 513-1991 - Email: targettiusa@targetti.com - www.targetti.us - 10.07.18 - Page 6 of 6