Website:

08 West 8th Avenue, Chico CA, 996 Phone: (0) 89-890 Fax: (0) 89-96 Website: www.thomaswelding.com Email: info@thomaswelding.com parts@thomaswelding.com

PRE-CLEANER SERIAL DUMP CART

TABLE OF CONTENTS SAFETY FIRST... PURPOSE OF THIS MANUAL... IMPORTANT ORDERING INFORMATION... PRE-CLEANER TRAILER PRE-CLEANER OVERALL... PRE-CLEANER BREAKDOWN... DESTICKER ASSEMBLY...6 DESTICKER DRIVE AND TAKE-UP ASSEMBLIES... DESTICKER CHAIN SEALS, BUMP, AND RETURN ROLLERS...8 DESTICKER CHAIN COVER AND SPLASH PANS...9 HITCH AND DRAG I-BEAM COMPONENTS...0 DUMP DOOR ASSEMBLY... DROP FLAP ASSEMBLY... STICK BOX ASSEMBLY... STICK CONVEYOR COMPONENTS... LEAF SPRING, AXLE, HUB, AND WHEEL COMPONENTS... HYDRAULIC COMPONENTS: PRE-CLEANER WITH STICK BOX...6 HYDRAULIC COMPONENTS: PRE-CLEANER WITH STICK CONVEYOR... HYDRAULIC FITTINGS...8 HYDRAULIC SCHEMATIC: PRE-CLEANER WITH STICK BOX...9 HYDRAULIC SCHEMATIC: PRE-CLEANER WITH STICK CONVEYOR...0 DUMP CART DUMP CART OVERALL... HYDRAULICS, HITCH, AND RUBBER FLASHING... HYDRAULIC SCHEMATIC... SPINDLE ASSEMBLY... DUMP CART HOIST COMPONENTS...6 HOIST CYLINDER ASSEMBLY...

SAFETY FIRST PAGE The owner, each operator, maintenance personnel and others within the operating area of the Pre-Cleaner Trailer or the Dump Cart must read and understand all of the information contained within both the Safety manual as well as the Maintenance manual before operating this equipment. Whenever you see this safety symbol It has the meaning of WARNING, DANGER, or CAUTION. You will see this symbol used in various locations on Thomas Ag Equipment wherever a safety hazard warning exists. DANGER Means the most serious hazard is present. Exposure will likely lead to injury or death. WARNING Means a lesser hazard exists. Risk of injury or death exists here. CAUTION Is a reminder to follow safety instructions and points out less serious hazards. NEVER perform any maintenance on the Pre-Cleaner Trailer or the Dump Cart until the wheels have been blocked and any other company Lockout/Tagout procedures have been followed. BE ALERT TO SAFETY HAZARDS!! CA PROP 6

PAGE PURPOSE OF THIS MANUAL The intention of this manual is to aid the owner, operator, and maintenance personnel with ordering replacement parts for required routine maintenance and repair. All replaceable parts can be found in their appropriate sections. Page numbers can be found on the table of contents and are listed in the index located on the last page of this manual. Thomas manufacturing s robust products are built to last and we have continued to progress our designs to build the best products. We are here to help with ordering the correct replacement parts for older machines or specialty parts, and a service representative can assist as needed. Proper use and routine maintenance performed by informed people will ensure that your Thomas Pre-Cleaner or Dump Cart continues as a safe and efficient tool for your agricultural operation. The Warranty Document for this equipment appears with your copy of the Purchase-Order which you received at the time of purchase. It is essential to cite the chassis serial number in all correspondence and repair parts order to ensure correct replacment parts are shipped for the appropriate machine. IMPORTANT ORDERING INFORMATION The drawings in this manual represent Pre-Cleaners and Dump Carts manufactured from 008 to present. Pre-Cleaners or Dump Carts made prior to 008 may not be accurately represented by the drawings in this manual. To ensure you recieve the correct parts, it is essential to include the year of manufacture and serial number when ordering. The manufacture year of your Pre-Cleaner or Dump Cart can be found on the original sales invoice, or on the side of the hitch as shown below. PRE-CLEANER TRAILER DUMP CART FIRST TWO DIGITS REPRESENT YEAR OF MANUFACTURE eg. SERIAL 960 WAS MANUFACTURED IN 0

PRE-CLEANER TRAILER PAGE

PAGE PRE-CLEANER FEATURES ADJUSTABLE SPEED DESTICKER CHAIN LARGE HYDRAULIC CONTROLLED STICK BOX FOR INCREASED STICK CAPACITY SHOWN WITH OPTIONAL HYDRAULIC OPERATED DOOR ON BOTTOM HOPPER HEAVY DRAG BEAM TO SPREAD DIRT FROM HARVESTER RUBBER SKIRT TO CONTAIN NUTS FOR UNIORM WINDROW OPTIONAL STICK CONVEYOR

PRE-CLEANER BREAKDOWN PAGE 8 6 DESCRIPTION QTY CATALOG PAGE P0-000 DRAG I-BEAM ASSEMBLY 0 P0-000 DUMP DOOR ASSEMBLY P0-000 DROP FLAP ASSEMBLY P00-000 DESTICKER ASSEMBLY 6-9 P00-000 STICK BOX ASSEMBLY 6 P00-000 STICK CONVEYOR ASSEMBLY - LEAF SPRING, SPINDLE, & WHEEL ASSEMBLY 8 - HYDRAULIC SYSTEMS 6-0

DESTICKER ASSEMBLY PAGE 6 8 6 0 DESCRIPTION QTY CATALOG PAGE P00-00 CHAIN SEAL PLASTIC 8 P00-00 FRONT CHAIN COVER ASSEMBLY 9 P0-000 DRIVE SHAFT ASSEMBLY P06-000 TAKE UP SHAFT ASSEMBLY P0-000 RETURN ROLLER ASSEMBLY 6 8 6 P08-000 DS SPLASH PAN ASSEMBLY 9 P09-000 PS SPLASH PAN ASSEMBLY 9 8 P0-000 BUMP ROLLER ASSEMBLY 8 9 P0-000 DESTICKER CHAIN - 0 P60-000 DESTICKER MOTOR ASSEMBLY

DESTICKER DRIVE AND TAKE-UP ASSEMBLIES PAGE 8 9 WELDED SPROCKET 8 0 0 6? 0 0 6 8 6 DESCRIPTION QTY P0-000 DRIVE SHAFT ASSEMBLY P06-000 TAKE-UP SHAFT ASSEMBLY E0--00 TORQUE ARM HYDM-TBO9 DRIVE MOTOR CPL-6-6 " X " SPLIT COLLAR 6 BR-PB6 " PILLOW BLOCK BEARING (HCAK0-6) BR-TU6 " TAKE-UP BEARING (HCST0-6) 8 C06-00 TAKE UP FLOATER SPROCKET BUSHING 9 C06-00 TAKE UP FLOATER SPROCKET 0 P0-0 TAKE UP LOCK PLATE - 8" X 9" ALL THREAD - 8" SAE WASHER - 8" HEX NUT - 8" JAM NUT DESCRIPTION QTY - " X " HEX BOLT 6 - " FLAT WASHER - " LOCK WASHER 8 - " HEX NUT 9-8" X " HEX BOLT 0-8" X " HEX BOLT - 8" FLAT WASHER 8-8" SAE WASHER - 8" LOCK WASHER 8-8" HEX NUT 8-6" X " HEX BOLT 6-6" LOCK WASHER - " X 8" PANHEAD ALLEN 8

DESTICKER CHAIN SEALS, BUMP, AND RETURN ROLLERS PAGE 8 8 9 0 6 0 6 8 0 8 9 DESCRIPTION P00-00 CHAIN SEAL PLASTIC P00-00 CHAIN SEAL BACKER P00-00 UHMW WEAR STRIP P0-000 RETURN ROLLER ASSEMBLY 6 P0-00 RETURN ROLLER 6 6 P0-000 BUMP ROLLER ASSEMBLY P0-00 BUMP ROLLER 8 P0-00 BUMP ROLLER SPACER 9-0 - - - - - - 6 - - 8-9 - 0 - QTY " SET COLLAR 6 " X " HEX BOLT " X " HEX BOLT 6 " FLAT WASHER " LOCK WASHER 6 " HEX NUT 6 " NYLOCK " X " COUNTER SUNK ALLEN 8 " X " HEX BOLT 6 " FLAT WASHER " LOCK WASHER " HEX NUT

DESTICKER CHAIN COVER AND SPLASH PANS PAGE 9 8 9 8 9 9 8 6 DESCRIPTION P00-00 FRONT CHAIN COVER ASSEMBLY P0-0 DESTICKER DECK P08-00 SPLASH PAN - - 6 - - 8-9 - QTY " X " HEX BOLT " X " HEX BOLT " X " COUNTER SUNK ALLEN " FLAT WASHER " LOCK WASHER " HEX NUT

HITCH AND DRAG I-BEAM COMPONENTS PAGE 0 8 0 9 DESCRIPTION QTY P00-0 HITCH P0-00 DRAG I-BEAM P0-00 LIFT CHAIN P0-00 PULL CHAIN DRAG BEAM PRESSURE HOSE P60-00 6 DRAG BEAM RETURN HOSE JS00 JACK STAND ASSEMBLY 8 HYDTR-006 DRAG BEAM CYLINDER (HTR-006) 9 - " X " HEX BOLT 0 - " NYLOCK - - - 8 " X " HEX BOLT 8 " LOCK WASHER 8 " HEX NUT 0-8-6 PIPE TO JIC

DUMP DOOR ASSEMBLY PAGE 0 * 8 9 6 *NOTE: SET COLLAR BODY IS WELDED TO PIVOT ARM DESCRIPTION P0-000 DUMP DOOR ASSEMBLY * P0-00 PIVOT ARM P60-000 CYLINDER MOUNT ASSEMBLY DUMP DOOR PRESSURE HOSE P60-0 DUMP DOOR RETURN HOSE 6-0-6 PIPE TO JIC 90 BR-PB0 " PILLOW BLOCK BEARING (HCAK0-0) 8 TL60-0 60 X " TAPPER LOCK 9 HYDTR-008 DUMP DOOR CYLINDER (HTR-008) 0 - " X " HEX BOLT - " X " HEX BOLT - " FLAT WASHER 8 - " SAE WASHER - " LOCK WASHER 6 - " HEX NUT 6 QTY

DROP FLAP ASSEMBLY PAGE 8 9 6 0 FRONT OF TRAILER DESCRIPTION P0-00 FRONT DROP FLAP P0-00 SIDE DROP FLAP P0-00 REAR DROP FLAP P0-00 FRONT & REAR DROP FLAP MOUNT P0-00 SIDE DROP FLAP MOUNT 6 - - 8-9 - 0 - - - - QTY 8 " X " HEX BOLT 8 " FLAT WASHER 8 8 " LOCK WASHER 8 " HEX NUT " X 8" HEX BOLT " FLAT WASHER " LOCK WASHER " HEX NUT

STICK BOX ASSEMBLY PAGE 8 9 0 6 6 0 6 DESCRIPTION QTY P0-00 PIVOT ARM P00-000 STICK BOX ASSEMBLY P00-0 STICK BOX SHIM P60-000 CYLINDER MOUNT ASSEMBLY P60-006 STICK BOX PRESSURE HOSE 6 P60-00 STICK BOX RETURN HOSE HYDTR-00 STICK BOX CYLINDER (HTR-00) 8 BR-PB " PILLOW BLOCK BEARING (HCAK0-) 9 TL60-60 X " TAPPER LOCK 0-0-6 PIPE TO JIC 90 - " X " HEX BOLT - " X " HEX BOLT - " FLAT WASHER - " SAE WASHER - " LOCK WASHER 8 6 - " HEX NUT 8

6 DETAIL D STICK CONVEYOR COMPONENTS PAGE 0 8 6 8 9 8 DETAIL A 6 DETAIL C * C 0 9 0 9 * D 8 8 9 0 DETAIL B DESCRIPTION QTY E0--00 TORQUE ARM P00-00 STICK CONVEYOR BELT P0-000 BACK PANEL ASSEMBLY P0-000 DRIVE ROLLER ASSEMBLY P0-0 DRIVE BEARING BACKER 6 P0-000 TAKE-UP ROLLER ASSEMBLY P0-00 TAKE-UP BEARING ADJUSTER 8 P0-00 CHAIN SEAL RUBBER 9 P0-00 CHAIN SEAL BACKER 0 P60-0 STICK CONVEYOR PRESSURE HOSE P60-0 STICK CONVEYOR RETURN HOSE HYDM-TBO9 DRIVE MOTOR BR-PB0 " PILLOW BLOCK (HCAK0-0) CPL-6-0 " X " SPLIT COLLAR - " X 6 " ALL THREAD 6 - " SAE WASHER - " HEX NUT A B *NUT WELDED TO UNDERSIDE OF PLATE 8 - " X " HEX BOLT 8 9 - " SAE WASHER 8 0 - " LOCK WASHER 8 - " HEX NUT* 8-8" X " HEX BOLT 0-8" LOCK WASHER 8-8" HEX NUT 8-6" X " HEX BOLT 6-6" LOCK WASHER - " X " HEX BOLT 8 - " FLAT WASHER 6 9 - " LOCK WASHER 0 - " HEX NUT - " SQUARE NUT

8 LEAF SPRING, AXLE, HUB, AND WHEEL COMPONENTS PAGE 0 9 6 6 8 9 0 DESCRIPTION QTY LS-0 LEAF SPRING PACK LS0-0 REAR HANGER LINK LS0-0 " U-BOLT AXLE PLATE H0-00 ON HUB ASSEMBLY H0-00 DUST SEAL 6 H0-00 OUTER WHEEL BEARING H0-00 INNER WHEEL BEARING 8 H0-00 WASHER 9 H0-006 STAMPED LOCK RING 0 H0-00 HUB CAP H0-0 HUB H0-0 INNER BEARING RACE 0 H0-0 OUTER BEARING RACE 0-8" X " COTTER PIN - " JAM NUT 6 - " X 8" PRESS FIT WHEEL STUD 0-0-D TIRE AND RIM 8 - " LUG NUT 0 9-9 6" X " SHACKLE BOLT 6 0-9 6" HEX NUT 6 - " X 6 " - " AXLE U-BOLT - " LOCK WASHER 8 - " HEX NUT 8

HYDRAULIC COMPONENTS: PRE-CLEANER WITH STICK BOX PAGE 6 8 6 0 9 8 6 DESCRIPTION QTY P600-00 HYDRAULIC MANIFOLD BODY P60-00 DESTICKER MOTOR RETURN HOSE P60-00 DESTICKER MOTOR PRESSURE HOSE P60-00 FLOW CONTROL TO MANIFOLD HOSE SYSTEM PRESSURE HOSE P60-00 6 SYSTEM RETURN HOSE DRAG BEAM PRESSURE HOSE P60-00 8 DRAG BEAM RETURN HOSE 9 P60-006 STICK BOX PRESSURE HOSE 0 P60-00 STICK BOX RETURN HOSE P60-008 FLOW CONTROL TO SOLENOID HOSE P60-009 SOLENOID TO SOLENOID HOSE DUMP DOOR PRESSURE HOSE P60-0 DUMP DOOR RETURN HOSE HYD-FC-0 FC-0SAE FLOW CONTROL 6 HYDBC-S0 SOLENOID CARTRIDGE 0AA0009A HYDBC-S0 SOLENOID COIL (V) 0AA0009A 8 HYDBC-B00 SOLENOID BLOCK 8 REV-

HYDRAULIC COMPONENTS: PRE-CLEANER WITH STICK CONVEYOR PAGE 0 9 6 0 9 8 8 DESCRIPTION QTY P600-00 HYDRAULIC MANIFOLD BODY P60-00 DESTICKER MOTOR RETURN HOSE P60-00 DESTICKER MOTOR PRESSURE HOSE P60-00 FLOW CONTROL TO MANIFOLD HOSE SYSTEM PRESSURE HOSE P60-00 6 SYSTEM RETURN HOSE DRAG BEAM PRESSURE HOSE P60-00 8 DRAG BEAM RETURN HOSE 9 P60-008 FLOW CONTROL TO SOLENOID HOSE 0 P60-009 SOLENOID TO SOLENOID HOSE P60-00 SOLENOID TO SOLENOID 90 HOSE DUMP DOOR PRESSURE HOSE P60-0 DUMP DOOR RETURN HOSE P60-0 STICK CONVEYOR PRESSURE HOSE P60-0 STICK CONVEYOR RETURN HOSE 6 HYD-FC-0 FC-0SAE FLOW CONTROL HYDBC-S0 SOLENOID CARTRIDGE 0AA0009A 8 HYDBC-S0 SOLENOID COIL (V) 0AA0009A 9 HYDBC-B00 SOLENOID BLOCK 8 REV- 0 HYDBC-B00 SOLENOID BLOCK 088- REV- HYDBC-S0 SOLENOID COIL (V) 00AA0009A HYDBC-S0 SOLENOID CARTRIDGE 6

HYDRAULIC FITTINGS PAGE 8 TOP SOLENOID BLOCK DUMP DOOR VALVE 8 PRE-CLEANER WITH DUMP CONVEYOR CENTER SOLENOID BLOCK STICK BOX VALVE BOTTOM SOLENOID BLOCK DRAG BEAM VALVE 0 PRE-CLEANER WITH DUMP CONVEYOR TOP SOLENOID BLOCK STICK CONVEYOR VALVE CENTER SOLENOID BLOCK DUMP DOOR VALVE P600-000 HYDRAULIC MANIFOLD ASSEMBLY * 6 * 8* *ONLY USED ON PRE-CLEANER WITH STICK CONVEYOR DESCRIPTION HYDV-N0 06 BI-DIRECTIONAL NEEDLE VALVE 8" HYDV-DN0 08 DIECTIONAL NEEDLE VALVE 8" HYDV-PC0 PARKER CHECK VALVE C00S - 0--6 PIPE TO JIC - 0--6 PIPE TO JIC 6-0-6 PIPE TO JIC ADAPTER - 0-8 PIPE TO JIC 8-0-8- PIPE TO JIC 9-0-8 PIPE TO JIC 90 0-00-8 PIPE TO JIC TEE - 0--6 PIPE TO FEMALE JIC - 06-6 O-RING TO JIC 90-00-6 O-RING TO JIC - 00-6-8 O-RING TO JIC - 000-6 O-RING TO JIC RUN TEE 6-000-8 O-RING TO JIC RUN TEE - FF00-6-8 O-RING TO O-RING ADAPTER 8-9 - 0 - - " X " PANHEAD ALLEN " X 8" HEX BOLT " LOCK WASHER QTY " HEX NUT 9 0 P60-000 FLOW CONTROL VALVE ASSEMBLY 0 9 0 0 8 6

HYDRAULIC SCHEMATIC: PRE-CLEANER WITH STICK BOX PAGE 9 A H M B C D E N P 9 8 L N N P P 6 K J 0 F G DESCRIPTION P60-00 DESTICKER MOTOR RETURN P60-00 DESTICKER MOTOR PRESSURE P60-00 FLOW CONTROL TO MANIFOLD SYSTEM PRESSURE P60-00 SYSTEM RETURN 6 DRAG BEAM PRESSURE P60-00 DRAG BEAM RETURN 8 P60-006 STICK BOX PRESSURE 9 P60-00 STICK BOX RETURN 0 P60-008 FLOW CONTROL TO SOLENOID P60-009 SOLENOID TO SOLENOID DUMP DOOR PRESSURE P60-0 DUMP DOOR RETURN DESCRIPTION A P600-00 HYDRAULIC MANIFOLD BODY B DUMP DOOR SOLENOID BLOCK C 8 REV- STICK BOX SOLENOID BLOCK D DRAG BEAM SOLENOID BLOCK E HTR-008 DRAG BEAM CYLINDER F HTR-00 STICK BOX CYLINDER G HTR-006 DUMP DOOR CYLINDER H TBO 9 DESTICKER MOTOR J FC-0SAE FLOW CONTROL K C00S PARKER CHECK VALVE L 06 M 08 N P 8 " BI-DIRECTIONAL NEEDLE VALVE 8 " BI-DIRECTIONAL NEEDLE VALVE 00AA0009A SOLENOID COIL (V) 0AA0009A SOLENOID CARTRIDGE

HYDRAULIC SCHEMATIC: PRE-CLEANER WITH STICK CONVEYOR PAGE 0 E A H B D 0 M C 9 J P N G N P K L P 8 N 6 F DESCRIPTION P60-00 DESTICKER MOTOR RETURN P60-00 DESTICKER MOTOR PRESSURE P60-00 FLOW CONTROL TO MANIFOLD SYSTEM PRESSURE P60-00 SYSTEM RETURN 6 DRAG BEAM PRESSURE P60-00 DRAG BEAM RETURN 8 P60-008 FLOW CONTROL TO SOLENOID 9 P60-009 SOLENOID TO SOLENOID 0 P60-00 SOLENOID TO SOLENOID 90 DUMP DOOR PRESSURE P60-0 DUMP DOOR RETURN P60-0 STICK CONVEYOR PRESSURE P60-0 STICK CONVEYOR RETURN DESCRIPTION A P600-00 HYDRAULIC MANIFOLD BODY B STICK CONVEYOR SOLENOID BLOCK C 8 REV- DUMP DOOR SOLENOID BLOCK D DRAG BEAM SOLENOID BLOCK E 088- SOLENOID BLOCK F HTR-008 DRAG BEAM CYLINDER G HTR-006 DUMP DOOR CYLINDER H DESTICKER MOTOR TBO 9 J STICK CONVEYOR MOTOR K FC-0SAE FLOW CONTROL L C00S PARKER CHECK VALVE M 08 8 " BI-DIRECTIONAL NEEDLE VALVE N 00AA0009A SOLENOID COIL (V) P 0AA0009A SOLENOID CARTRIDGE

NOTES: PAGE 0

DUMP CART PAGE

DUMP CART FEATURES PAGE SHOWN HERE WITH THE CONVEYOR CART LOW PROFILE DESIGNED FOR HARVESTING EQUIPMENT FRONT DUMPING FOR GREATER OPERATOR VISIBILITY OPTIONS: AUGER MOTOR ASSEMBLY -POINT QUICK HITCH ELIMINATES PINTLE-TYPE HITCH ON BOTH ENDS MANUAL LIFTING DUAL TELESCOPIC LIFT CYLINDERS

DUMP CART HYDRAULICS, HITCH, AND RUBBER FLASHING PAGE 9 8 6 0 6 9 8 * *NOTE: PIPE TEE IS WELDED TO THE FRAME DESCRIPTION DC00-06 RUBBER FLASHING DC0-00 DC0-00 DC0-00 DC0-00 6 DC0-00 " X 68" TRACTOR TO TEE HOSE 8" X 0" LIFT CYLINDER HOSE 8" X 9" TRACTOR TO DOOR CYLINDER BUTT END QTY 8" X 8" TRACTOR TO DOOR CYLINDER ROD END 8" X 6" DOOR CYLINDER TO SOLENOID HYDTR-006 DUMP DOOR CYLINDER 8 HYDBC-B00 DUMP DOOR SOLENOID BLOCK 9 HYDBR-PR00L DUMP DOOR PRESSURE RELIEF 0 JS00 JACK STAND ASSEMBLY - 0-8-6 PIPE TO JIC 90-06-6 O-RING TO JIC 90-090-8 FEMALE TO FEMALE PIPE BRANCH TEE* - 00-6 O-RING TO O-RING - 000-6 O-RING TO JIC BRANCH TEE 6 - - 8-9 - X " ELEVATOR BOLT " FLAT WASHER " LOCK WASHER " HEX NUT

DUMP CART HYDRAULIC SCHEMATIC PAGE A D C A B DC0-00 TRACTOR TO TEE DC0-00 TEE TO LIFT CYLINDER DESCRIPTION DC0-00 TRACTOR TO DOOR CYLINDER BUTT END DC0-00 TRACTOR TO DOOR CYLINDER ROD END DC0-00 DOOR CYLINDER TO SOLENOID BLOCK A HYDHC-00-000 HOIST CYLINDER B HYDTR-006 DUMP DOOR CYLINDER C HYDBC-B00 SOLENOID BLOCK D HYDBC-PR00L PRESSURE RELIEF

6 DUMP CART SPINDLE ASSEMBLY PAGE 6 * 0 9 8 6 *NOTE: SPINDLE IS WELDED TO THE FRAME DESCRIPTION QTY * H08-000 COMPLETE HUB ASSEMBLY WITH BEARINGS & SEALS (INCLUDES S - ) H08-00 SPINDLE H08-00 DUST SEAL H08-00 OUTER WHEEL BEARING H08-00 INNER WHEEL BEARING 6 H08-00 SPINDLE WASHER H08-006 HUB CAP 8 H08-00 COMPLETE 8 LUG HUB ASSEMBLY (INCLUDES S 9 - ) 9 H08-0 8 ON 8 HUB 0 H08-0 INNER BEARING RACE H08-0 OUTER BEARING RACE - 8" X " PRESS FIT WHEEL STUD 6 - " X " COTTER PIN - " UNF- CASTLE NUT - " LUG NUT 6 6 8-R6LT TIRE & RIM ASSEMBLY

DUMP CART HOIST COMPONENTS PAGE 6 DESCRIPTION DC00-0 CYLINDER PIN DC0-00 QTY 8 " X 0" LIFT CYLINDER HOSE HYDHC-00-000 HOIST CYLINDER ASSEMBLY (SEE NEXT PAGE) - " x " HEX BOLT - " NYLOCK NUT 6-0-6 PIPE TO MALE 90

DUMP CART HOIST CYLINDER PAGE 8 6 0 9 8 DESCRIPTION QTY. HYDHC-00-000 " x " HOIST CYLINDER COMPLETE ASS'Y HYDHC-0-000 " x " HOIST CYLINDER BODY ASS'Y HYDHC-0-00 " x " HOIST CYLINDER HEAD NUT HYDHC-0-0 HEAD NUT O-RING HYDHC-0-0 HEAD NUT POLY SEAL 6 HYDHC-0-0 HEAD NUT GARRISON WIPER HYDHC-0-00 " x " CYLINDER TUBE STAGE 8 HYDHC-0-0 STAGE (-/8") POLY SEAL 9 HYDHC-0-0 STAGE (-/8") GARRISON SEAL 0 HYDHC-0-00 " x " CYLINDER TUBE STAGE HYDHC-0-0 STAGE (-/") POLY SEAL HYDHC-0-0 STAGE (-/") GARRISON WIPER HYDHC-0-00 " x " STAGE CYLINDER TUBE HYDHC-06-000 UPPER PIVOT ASSEMBLY - x " HEX BOLT 6 - HEX NUT - x PANHEAD ALLEN 8 HYDHC-00-00 HOIST CYLINDER SEAL REBUILD KIT 9 6 HOIST CYLINDER SEAL REBUILD KIT INCLUDES ALL WIPER GASKETS, SEAL GASKETS, & O-RING -WIPER GASKET LIP FACES UPWARD -SEAL GASKET GROVE FACES INWARD

OVERALL DIMENSIONS PAGE 9 6'-8" TOP VIEW '-" '-" SIDE VIEW 6'-8" '-" FRONT VIEW 8'-0" '-0" TOP VIEW 8'-0" '-0" SIDE VIEW '-" FRONT VIEW

NOTES: PAGE 0

INDEX DESCRIPTION PAGE DESCRIPTION PAGE BR-PB6 " PILLOW BLOCK BEARING BR-PB0 ¼" PILLOW BLOCK BEARING, BR-PB ½" PILLOW BLOCK BEARING BR-TU6 " TAKE UP BEARING C0-000 DRIVE SHAFT ASSEMBLY 6, C06-000 TAKE UP SHAFT ASSEMBLY 6, C06-00 FLOATER SPROCKET BUSHING C06-00 TAKE UP FLOATER SPROCKET CPL-6-6 " X " SHAFT COUPLER CPL-6-0 X ¼" SHAFT COUPLER E0--00 TORQUE ARM, H0-000 COMPLETE LUG HUB ASSEMBLY H0-00 DUST SEAL H0-00 OUTER WHEEL BEARING H0-00 INNER WHEEL BEARING H0-00 SPINDLE WASHER H0-006 STAMPED LOCKED RING H0-00 HUB CAP H0-00 LUG HUB H0-0 INNER BEARING RACE H0-0 OUTER BEARING RACE HYDBC-B00 COMPONENT SOLENOID BLOCK 6, HYDBC-B00 MAIN SOLENOID BLOCK COMPONENT SOLENOID HYDBC-S0 CARTRIDGE 6, HYDBC-S0 COMPONENT SOLENOID COIL 6, HYDBC-S0 MAIN SOLENOID CARTRIDGE HYDBC-S0 MAIN SOLENOID COIL HYD-FC-0 FLOW CONTROL VALVE 6, HYDM-TBO9 DRIVE MOTOR, HYDTR-008 DUMP DOOR CYLINDER HYDTR-00 STICK BOX CYLINDER HYDTR-006 DRAG BEAM CYLINDER 0 HYDV-DN0 DIRECTIONAL NEEDLE VALVE 8 HYDV-N0 BI-DIRECTIONAL NEEDLE VALVE 8 HYDV-PC0 PARKER CHECK VALVE 8 JS00 JACK STAND 0 LS0-0 REAR HANGER LINK LS0-0 " U-BOLT AXLE PLATE LS-00 LEAF SPRING PACK P00-0 HITCH 0 P0-00 DRAG I-BEAM 0 P0-00 LIFT CHAIN 0 P0-00 PULL CHAIN 0 P0-000 DUMP DOOR ASSEMBLY P0-00 PIVOT ARM P0-00 FRONT DROP FLAP P0-00 SIDE DROP FLAP P0-00 REAR DROP FLAP P0-00 FRONT & REAR FLAP MOUNT P0-00 SIDE FLAP MOUNT P00-00 CHAIN SEAL PLASTIC 8 P00-00 CHAIN SEAL BACKER 8 P00-00 UHMW WEAR STRIP 8 P00-00 FRONT CHAIN COVER PANEL 9 P0-0 TAKE UP LOCK PLATE P0-0 DESTICKER DECK 9 P0-000 TAKE UP ADJUSTER BOLT P0-000 RETURN ROLLER ASSEMBLY P08-00 DESTICKER SPLASH FLAP 9 P0-000 BUMP ROLLER ASSEMBLY 8 P0-00 BUMP ROLLER 8 P0-00 BUMP ROLLER SPACER PIPE 8 P00-000 STICK BOX ASSEMBLY P00-0 STICK BOX SHIM P00-00 STICK CONVEYOR BELT P0-000 BACK PANEL ASSEMBLY P0-000 DRIVE ROLLER ASSEMBLY P0-0 DRIVE BEARING BACKER P0-000 TAKE UP ROLLER P0-00 TAKE UP BEARING ADJUSTER P0-00 CHAIN SEAL RUBBER P0-00 CHAIN SEAL BACKER P600-00 HYDRAULIC MANIFOLD BODY 6, P60-000 CYLINDER MOUNT, P60-00 DESTICKER MOTOR RETURN HOSE 6, P60-00 DESTICKER MOTOR PRESSURE HOSE 6, P60-00 FLOW CONTROL TO MANIFOLD HOSE 6, P60-00 SYSTEM PRESSURE/RETURN HOSE 6, P60-00 DRAG BEAM CYLINDER HOSE 0,6, P60-006 STICK BOX BUTT END HOSE,6 P60-00 STICK BOX ROD END HOSE,6 FLOW CONTROL TO SOLENOID P60-008 HOSE 6, P60-009 SOLENOID TO SOLENOID HOSE 6, P60-00 SOLENOID TO SOLENOID 90* HOSE P60-0 DUMP DOOR CYLINDER HOSE,6, STICK CONVEYOR PRESSURE P60-0 HOSE, P60-0 STICK CONVEYOR RETURN HOSE, TL60-0 60 X ¼" TAPER BUSHING TL60-60 X ½" TAPER BUSHING

INDEX DESCRIPTION PAGE DESCRIPTION PAGE 8-R6LT TIRE AND RIM ASSEMBLY 6 DC00-0 CYLINDER PIN DC00-06 RUBBER FLASHING DC0-00 ½ x 68 HOSE TRACTOR TO TEE, DC0-00 ⅜ x 0 HOSE TEE TO LIFT CYL,, DC0-00 ⅜ x 9 HOSE TO DOOR CYL BUTT, DC0-00 ⅜ x 8 HOSE TO DOOR CYL ROD, DC0-00 ⅜ x 6 HOSE DOOR TO SOLENOID, H08-000 COMPLETE HUB ASSEMBLY W/ 6 BEARINGS AND SEALS H08-00 SPINDLE 6 H08-00 DUST SEAL 6 H08-00 OUTER WHEEL BEARING 6 H08-00 INNER WHEEL BEARING 6 H08-00 SPINDLE WASHER 6 H08-006 HUB CAP 6 H08-00 COMPLETE HUB ASSEMBLY W/O 6 BEARINGS AND SEALS H08-0 8 ON 8 HUB 6 H08-0 INNER WHEEL BEARING 6 H08-0 OUTER WHEEL BEARING 6 HYDBC-B00 DUMP DOOR SOLENOID BLOCK, HYDHC-00- COMPLETE HOIST CYLINDER,,8 000 HYDHC-00- HOIST CYLINDER SEAL REBUILD 8 00 KIT HYDHC-0- HOIST CYLINDER BODY 8 000 HYDHC-0- HOIST CYLINDER HEAD NUT 8 00 HYDHC-0- HOIST CYLINDER HEAD NUT 8 0 O-RING HYDHC-0- HOIST CYLINDER HEAD NUT 8 0 POLY SEAL HYDHC-0- HOIST CYLINDER HEAD NUT 8 0 GARRISON WIPER HYDHC-0- x CYLINDER TUBE STAGE 8 00 HYDHC-0- STAGE (-⅛ ) POLY SEAL 8 0 HYDHC-0- STAGE (-⅛ ) GARRISON SEAL 8 0 HYDHC-0- x CYLINDER TUBE STAGE 8 00 HYDHC-0- STAGE (-½ ) POLY SEAL 8 0 HYDHC-0- STAGE (-½ ) GARRISON SEAL 8 0 HYDHC-0- x STAGE CYLINDER TUBE 8 00 HYDHC-06-000 UPPER PIVOT ASSEMBLY 8 HYDTR-006 DUMP DOOR CYLINDER, JS00 JACK STAND

Thomas Manufacturing Co. LLC Pre-Cleaner and Dump cart Manual, October 08 Edition