Overview of rear lid trim panels

Overview of rear lid trim panels Overview of rear lid trim panels 1 - Rear lid trim (bottom) Exploded view and installing 2 - Rear lid trim (top) Exploded view and installing vw-wi://rl/a.en-gb.a00.5a50.39.wi::46107222.xml?xsl=3

Removing and installing rear lid trim (top) Page 1 of 2 Removing and installing rear lid trim (top) Special tools and workshop equipment required Removal lever -80-200- Removing Remove rear lid trim (bottom). First unclip rear lid trim (top) -1- from rear lid from the side using removal lever -80-200--arrows A-. Then unclip trim (top) from rear lid using removal lever -80-200--arrows B- and detach. Installing Installation is carried out in the reverse order; note the following: Note If there are still trim clips -2- in the rear lid mounting points, they must be removed and inserted in the trim when installing. Check the clips for damage or deformation and renew them if necessary. Check that all rubber buffers -1- are fitted in trim. First insert trim behind side window frames of rear lid. vw-wi://rl/a.en-gb.a00.5a50.39.wi::46107228.xml?xsl=3

Removing and installing rear lid trim (top) Page 2 of 2 Clip in rear lid trim (top), first at top and then at sides. vw-wi://rl/a.en-gb.a00.5a50.39.wi::46107228.xml?xsl=3

Exploded view of rear lid trim (top) Exploded view of rear lid trim (top) 1 - Clip 6x (at sides) Insert in trim Renew if damaged or deformed 2 - Rubber buffer 5x Insert in trim 3 - Rear lid 4 - Clip 4x (at top) Insert in trim Renew if damaged or deformed 5 - Rear lid trim (top) and installing vw-wi://rl/a.en-gb.a00.5a50.39.wi::46107227.xml?xsl=3

Removing and installing trim for rear lid lock Removing and installing trim for rear lid lock Removing Detach trim for rear lid lock -1- in direction of -arrow-. Installing Press on trim for rear lid lock until it engages audibly. vw-wi://rl/a.en-gb.a00.5a50.39.wi::46107226.xml?xsl=3

Removing and installing rear section of rear shelf Removing and installing rear section of rear shelf Removing Disengage rear shelf -1- from rear lid - arrows A-, pull out of rear lid trim - arrow B- and detach. Installing Insert rear shelf in rear lid trim and engage in mountings (left and right) - arrows A-. vw-wi://rl/a.en-gb.a00.5a50.39.wi::46107206.xml?xsl=3

Removing and installing rear lid trim (bottom) Page 1 of 2 Removing and installing rear lid trim (bottom) Special tools and workshop equipment required Removal lever -80-200- Removing Remove rear section of rear shelf. Remove luggage compartment light Electrical system; Rep. gr.96. Remove trim for rear lid lock. Remove tail light covers. Remove bolts -1- and -2-. Release clips on rear lid trim (bottom) -3- using removal lever -80-200- and carefully unclip rear lid trim (bottom) from rear lid -arrows A, B-. Reach in between trim and rear lid and disengage the remaining clips -arrows C-. Detach rear lid trim (bottom). Installing Installation is carried out in the reverse order; note the following: Note If there are still trim clips -2- in the rear lid mounting points, they must be removed and inserted in the trim when installing. Check the clips for damage or deformation and renew them if necessary. Check that all rubber buffers -5- are fitted vw-wi://rl/a.en-gb.a00.5a50.39.wi::46107225.xml?xsl=3

Removing and installing rear lid trim (bottom) Page 2 of 2 in trim. First apply rear lid trim (bottom) -6- at centring pins -1, 3, 4- and then press on trim until it engages audibly. Tightening torque vw-wi://rl/a.en-gb.a00.5a50.39.wi::46107225.xml?xsl=3

Removing and installing cover for tail light Removing and installing cover for tail light Note Removal and installation are identical on the left and right. Special tools and workshop equipment required Removal wedge -3409- Removing Use removal wedge -3409- to unclip tail light cover -1- from trim (bottom) -2- in direction of -arrow- and detach. Installing Position cover for tail light on bottom of trim and press it on until it engages audibly. vw-wi://rl/a.en-gb.a00.5a50.39.wi::46107224.xml?xsl=3

Exploded view of rear lid trim (bottom) Exploded view of rear lid trim (bottom) 1 - Bolt 2x 2 Nm 2 - Cover For tail light and installing 3 - Rubber buffer 7x Insert in trim 4 - Clip 8x Insert in trim Renew if damaged or deformed 5 - Rear lid 6 - Rear lid trim (bottom) and installing 7 - Luggage compartment light and installing Electrical system; Rep. gr.96 8 - Cover For manual release mechanism 9 - Trim For rear lid lock and installing vw-wi://rl/a.en-gb.a00.5a50.39.wi::46107223.xml?xsl=3