VA/VG Series On/Off and Shut-off Valve

Similar documents
Series Regulators - Pressure Reducing

General Specifications

General Specifications

Mini 1. Compact High Flow 3-Way and 4-Way Pneumatic Directional Control Valves

Check Valves, Filters and Relief Valves

O-Rings. Back pressure may be required to reseal the valves with nominal cracking pressure of 5psi or lower.

Powers Controls Powermite Two-Way Flared Valves Normally Open/Normally Closed

Pneumatic Valve 4V100 Series

599 Series Zone Valve Bodies:

Series 11 Miniature Pneumatic Solenoid Valve 15mm Solenoid Valve

Chlorine Gas Valves Robust Valve

Solution Partner. Leak - Proof Flow & Control. Check & Relief Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f.

Worcester Controls Directional Ball Valves

TY-FLO 3 Piece Ball Valves

Powers Controls Powertop Two-Way Valves Normally Open

Direct solenoid and solenoid pilot operated valves

Inline Adapters are Electro Polished to 10 Ra Max. 2 Valves supplied with Metal to Metal Face Seal connections have

Pressure Control Valves. General Description. Specifications. Ordering Information

Dymension SG Manifold Valves Using Direct Mount Manifold Technology

Hose Length Custom Length Supply Line Options Ball Valve w/ PT UBY Strainer w/ PT and BDV

Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas productio

DeZURIK KSL-LA SLURRY KNIFE GATE VALVES TECHNICAL SPECIFICATIONS

BULLETIN D NOVEMBER DeZURIK KSL-SD SLURRY KNIFE GATE VALVES TECHNICAL SPECIFICATIONS

Powermite 599 Series MT Series Terminal Unit Two-way Valves

Type 543. Three-way Ball Valve

QUICK SELECTION GUIDE

SPUR GEAR PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1451 Page 1451.

Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas productio

Solution Partner. Leak - Proof Flow & Control. Check & Relief Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f.

Flow Limit Safety Shutoff Valves Model 1

High Pressure 2-way 2 1/2-6 Globe Valves

Technology for a Better Future. VALVES International Edition.

SCREWED BONNET NEEDLE VALVES

SERIES. CRYOGENIC/PRESSURE BUILD REGULATOR 3/8 and 1/2" NPT, BSPT Inlet 400 Psig (28 Bar) Description

AV-497. Application. Features. Valve Linkage for MK-6811 and MK-6911 General Instructions

(Accessory, see ordering info) Wetted Materials

ICO2S - 2/2, 3/2 or 5/2 Exia poppet valves Electromagnetically actuated, solenoid pilot operated

Bushing Viton O-ring (Other material available) Anti-Static Device

Check Valves (C Series) Catalog 4130-C Revised, July 2004

CR8 Manual Multi-turn Valve

Flowrite TM AP 599 Series 8-inch Pneumatic Valve Actuator

PP1 Series Piping Packages for VG1000 Series Ball Valves

S E LV Ball Valves VA

Zone Valves and Parts (Honeywell)

Kunkle Safety and Relief Products. Series 6000

Pressure Control SYSTEMS

Type Electrically Actuated Ball Valve

SVF FLOW CONTROLS. Series # Flanged Standard Port Fire Safe / API th Edition. Performance Engineered I N C O R P O R A T E D

Complete Range of Movement Solutions

MK-6600 Series, MK-6800 Series, and MK-6911

ANGLE SEAT AIR ACTUATED VALVES 2 Way (2/2)

Check Valves. C, CA, CH, CP, and CPA Series. Working pressures up to 6000 psig (413 bar) Adjustable and fixed cracking pressures

Type 145. Electrically Actuated Wafer Butterfly Valve

instrumentation ball valves

Check valve series. SHCV, SOCV, SOACV, SACV Series. Phone: Fax: Wimbledon Rd.

EI, EIO INTRINSICALLY SAFE VALVES

PROCESS & AUTOMATED VALVES

Kunkle Safety and Relief Products

5100 Series Inline Relief Valve 10 to 2,400 PSIG

DMH085** Series will be available January 1, Catalog HY /US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO.

Trunnion Ball Valves. TB Series. Wide variety of end connection types and sizes. Flow Coefficient: up to 1.6

Check Valves (CO Series) Catalog 4130-CO Revised, June 2001

CR4 Discrete Valve and Manifold Valve Repair or Replacement Procedure

VG2000 Series Electric Cast Iron Flanged Globe Valves

DE- OUT OUT DE- OUT OUT DE- SERIES MODEL E21 2-WAY NORMALLY OPEN CONDUIT HOUSG (700) 235 (0) 1 (3) (1) (700) 235 (0) 1 (3) (1) E21G7XC

FULL BORE BALL VALVE of carbon steel with welded ends / flanges and series

FLOW CONTROL VALVES & ACCESSORIES

M x Series Valve Linkage Kits

Colorflow and Ball Valves. Industrial Flow Control, Check, Gauge Control. Catalog HY /US

Powers TM Controls VP 656 Powermite Three-way Mixing Valves (Flared Type)

QSS: Quick Set System. Product Catalog Compression Sleeve Valves and Fittings to 15,000 psi (1034 bar)

Stainless Steel Pressure Filters

DeZURIK BOS-CL ON-CENTER, RESILIENT SEATED BUTTERFLY VALVE TECHNICAL SPECIFICATIONS

Rosemount Twisted Square Thermowells

BVM Series Flanged Industrial Control Ball Valves 2 Way 2-1/2-12

Valve Body Capacities/Specifications

Compact Electric Actuated 3-Way Ball Valves T-Port, 316 Stainless Steel, Full Port 1/4 to 3/4 NPT

Powermite 599 Series MT Series Terminal Unit Three-way Valves

Powers Controls No. 6 Pneumatic Damper Actuator

North American Automatic Manual Reset and Motorized Valves

ROSS CONTROLS. Base Mounted Valves. and Serial Bus Communication

Miniature Pneumatic Solenoid Valve

Trunnion Ball Valves. TB Series. Working Pressure: up to 10,000 psig (689 bar) End Connections: 1/8 to 3/4 in.

Pneumatic and Electronic Motion Control Distributor AIROYAL COMPANY airoyalcompany.net Ph: Fax:

Check Valves. C, CA, CH, CP, and CPA Series. Working pressures up to 6000 psig (413 bar) Adjustable and fixed cracking pressures

VG7000 Series Bronze Control Valves

Powers TM Controls Three-way Electro-pneumatic (EP) Valve Model 2

HERION. MINI ISO VALVES Size 18 mm, V40 / V41 SERIES Size 26 mm, V44 / V45 SERIES. Flexible subbase system with a wide range of accessories

Bushing Viton O-ring (Other material available) Anti-Static Device

R o L. BALL VALVE of stainless steel with welded / threaded / flanges ends 440, 442, 443, 445 series SILVER LINE. Description. Edition

Locked Bonnet Needle Valves

AV-430. Application. Features. Applicable Literature. Valve Linkage for Pneumatic Actuators General Instructions

Air Actuated Ball Valves 2-Way, Lead Free Brass, Full Port 1/4 to 3 NPT

TAC TM Butterfly Valve Assemblies

Available manual, pneumatic, and hydraulic spool control kits.

Valves. Model Code Breakdown. Valves. Steel High Pressure Steel Ball Valves. Steel High Pressure Steel Ball Valves

Flowrite 599 Series Two-Way Valves, 1/2 to 2- inch Bronze Body, ANSI 250

Ball and Stem Materials: 316 Stainless Steel Alloy 20 Monel Hastelloy C. Service Applications: Hydraulics Chemical

3 Port Solenoid Valve Pilot Operated Poppet Type. External pilot

GM - G XXX-XXX. Direct solenoid and solenoid pilot operated valves. Function Port size Flow [Max] Individual mounting. Series 77

Transcription:

VA/VG Series On/Off and Shut-off DVAVG862X02 Specifications For other materials or modifications, please consult TESCOM. PARAMETERS Pressure rating per criteria of ANSI/ASME B3.3 Maximum Operating Pressure 3500, 6000, 0,000 psig / 24, 44, Design Proof Pressure 50% maximum rated Leak Rate Bubble-tight Ambient Operating Temperature See Part Number Selector Flow Capacity VA Series : Cv = 0.75 VG Series : Cv = 2.0 Low Actuation Pressure Range 60 psig / 4. bar Maximum Actuation Pressure VA Series : 25 psig / 8.6 bar VG Series : 50 psig / 0.3 bar Actuation Times with 80 psig / 5.5 bar Actuation Pressure VA Series : 50 milliseconds VG Series : 75 milliseconds MEDIA CONTACT S Body, 36 Seats, Tefzel, Vespel Stem 7-4 O-Rings,,, Ethylene Propylene (), Back-up Rings, Remaining Parts 36, OTHER Cleaning CGA 4. and ASTM G93 Weight (approximate) VA Series : 3 lbs /.4 kg VG Series : 5 lbs / 2.3 kg,, Tefzel,, and Vespel are registered trademarks of E.I. du Pont de Nemours and Company. TESCOM VA and VG Series are air operated valves offering normally open/normally closed capabilities, operating pressures of 6000, 0,000, and 5,000 psig / 44, 690, and 034 bar, very high cycle life and optional integrated solenoid valve. Suitable for liquid and gas applications. Applications High pressure cycling testing Pneumatic and hydraulic control panels R&D labs VG SERIES VALVE Features and Benefits OPTIONAL INTEGRATED SOLENOID VALVE PNEUMATIC ASSIST" VA SERIES VALVE Balanced poppet design means high reliability and exceptional cycle life High flow capacity: Cv = 0.75 or 2.0 Normally open or normally closed or 36 machined bar stock Low actuation: 60 psig / 4. bar - minimum High operating pressure: / 44 bar maximum (), 0,000 psig / maximum ( ) 5,000 psig / 034 bar version is available Oxygen model is available that has passed adiabatic compression test per ISO 0524 Optional pneumatic assist solenoid valve actuation (2V, 24V or 5V) 529

VA/VG Series Drawings VA SERIES NORMALLY CLOSED VERSION INLET psi OUTLET TOOLS FOR ASSEMBLY FOR VA VALVE PART NO. DESCRIPTION QUANTITY PART NO. DESCRIPTION QUANTITY 64082-64083- 64095 Tool, Spacer Tool, Base Hex Collet Chuck 64096 64097 64084 Collet Spanner Wrench Collet, /4" / 6.35 mm Complete Kit VG SERIES NORMALLY OPEN VERSION INLET psi OUTLET All dimensions are reference & nominal Metric [millimeter] equivalents are in brackets 530

VA SERIES For Non-Metallic Kit K I T N VA C AB 9 A 9 B 9 SERIES OPTIONS 3 6 9 2 VA C Normally 6 36 AB Tefzel AK Tefzel AV Tefzel AE Tefzel AU Tefzel CB CK CV CE CU -7 C to 2 C -40 C to 2 C 20 F to 65 F -7 C to 74 C -5 F to 65 F -26 C to 74 C C CCL V Solenoid (24 volt) W Solenoid (2 volt) A /4" NPTF E /4" SAE N /8" NPTF C v to 0.5) A /4" NPTF B /4" NPTF E /4" SAE F /4" SAE P /8" NPTF C v to.5) A /4" NPTF B /4" NPTF E /4" SAE F /4" SAE P /8" NPTF C v to.5) A /4" NPTF B /4" NPTF E /4" SAE F /4" SAE P /8" NPTF C v to.5) 44 bar 0,000 psig -7 C to 2 C 44 bar 0,000 psig -7 C to 2 C -40 C to 2 C * For additional porting types, consult factory. 53

VG SERIES For Non-Metallic Kit K I T N VG C CB 9 C 9 D 9 SERIES OPTIONS 3 6 9 2 VG C Normally 6 36 CB CK CV CE CU 20 F to 65 F -7 C to 74 C -5 F to 65 F -26 C to 74 C C CCL V Solenoid (24 volt) W Solenoid (2 volt) G /2" NPTF G /2" NPTF H /2" NPTF G /2" NPTF H /2" NPTF G /2" NPTF H /2" NPTF 44 bar 0,000 psig -7 C to 2 C -40 C to 2 C P /2" SAE K 3/4" NPTF M 3/8" SAE P /2" SAE K 3/4" NPTF M 3/8" SAE P /2" SAE K 3/4" NPTF M 3/8" SAE P /2" SAE 44 bar 0,000 psig -7 C to 2 C -40 C to 2 C R /2" SAE R /2" SAE R /2" SAE 532

VALVE MODULES FOR VA SERIES VALVE 63583 - C 6 CV SERIES BACK-UP RING 63583 C Normally 6 36 AB Tefzel AK Tefzel AV Tefzel AE Tefzel AU Tefzel / / / / -7 C to 2 C / / CB CK CV CE CU / 500 psig / / 20 F to 65 F / -7 C to 74 C -5 F to 65 F / -26 C to 74 C / / / 44 bar 0,000 psig / / / -7 C to 2 C / / VG Vespel 90 Duro / 44 bar 0,000 psig / / / -7 C to 2 C / / 533

VALVE MODULES FOR VG SERIES VALVE 67270 - C 6 VV SERIES BACK-UP RING 67270 C Normally 6 36 CB CK CV CE CU / / / 20 F to 65 F / -7 C to 74 C -5 F to 65 F / -26 C to 74 C / / / 44 bar 0,000 psig / / / -7 C to 2 C / / / 44 bar 0,000 psig / / / -7 C to 2 C / / 534