Crawler excavator R 916 R 926

Crawler excavator R 916 R 926 Operating weight: 49,603 60,075 lb 54,674 62,390 lb Engine output (SAE J1349): 154 HP / 115 kw 173 HP / 129 kw Engine output (ISO 9249): 157 HP / 115 kw 175 HP / 129 kw Bucket capacity: 0.98 1.70 yd³ 1.24 2.03 yd³

R 916 R 926 Operating weight: 49,603 60,075 lb Engine output (SAE J1349): 154 HP / 115 kw Engine output (ISO 9249): 157 HP / 115 kw Bucket capacity: 1.24 1.55 yd³ Operating weight: 54,674 62,390 lb Engine output (SAE J1349): 173 HP / 129 kw Engine output (ISO 9249): 175 HP / 129 kw Bucket capacity: 1.24 1.55 yd³ 2 R 916 Litronic R 926 Litronic

Performance Thanks to its innovative system technology, the crawler excavator has performance features that are truly unique. The energy efficient Positive Control dual-circuit hydraulic system is designed specifically to allow multiple functions or machine movement at the same time. The electronic pump control sets a new standard for performance and efficiency. Reliability Backed by more than 50 years experience designing and building hydraulic excavators, Liebherr designed the new Generation 6 Excavators to provide the maximum in reliability and performance. Comfort Designed to the latest ergonomic standards, the operators cab provides exceptional comfort, ease of operation and an outstanding, wide view to the working area. For Liebherr, comfort also applies to service, with centrally located service points and easy, rapid access. Economy Crawler excavators from Liebherr guarantee maximum productivity. The optimized interaction of hydraulics and electronics means that individual movements as well as multiple functions can be performed at the same time without decreasing efficiency. R 916 Litronic R 926 Litronic 3

Positive Control dual-circuit hydraulic system Fast, precise hydraulic flow as needed; even when performing multiple functions or movements Load sensing hydraulics for smooth, efficient movements Optimum energy utilization 4 R 916 Litronic R 926 Litronic

Performance Thanks to its innovative system technology, the R 916 and R 926 crawler excavators have performance features that are truly unique. The energy efficient Positive Control dual-circuit hydraulic system is designed specifically to allow multiple functions or machine movement at the same time. The electronic pump control sets a new standard for performance and efficiency. integrated excavator system technology High-tech for high performance Positive Control dual-circuit hydraulic system Power and speed Faster work cycles R 916 operating pressure R 926 operating pressure The excavators features the newly-developed integrated excavator system technology. This is based on the Positive Control hydraulic system, controlled by Liebherr electronics and the system software. The sensors located at strategic points on the machine form the basis for an intelligent system that allows for fast and efficient work. When traveling straight, turning or performing work functions, the two hydraulic pump circuits are either grouped together or operated independently. Operating separately, the pumps can supply components with different load pressures and flows independently, while combining the flow for maximum speed and multiple functions for optimum efficiency. The excavators features quick working cycles attained as a result of the Liebherr swing drive and exceptionally high swing torque. With an operating pressure of 5.511 PSI, the R 916 achieves higher hydraulically limited load capacities and higher digging forces, of up to 29.675 lbf, and break-out forces of up to 40.244 lbf; perfect for difficult applications. With an operating pressure of 5.511 PSI, the R 926 achieves high hydraulically limited load capacities and higher digging forces, of up to 33.946 lbf, and break-out forces of up to 43.388 lbf. Wide range of operational possibilities Large number of equipment options Adaptable to a wide range of applications from earthmoving to demolition Powerful Liebherr engines Four-cylinder diesel engines developed and manufactured by Liebherr specifically for construction machines, with system integration by means of CANBus and pump line nozzle injection system Efficient power output, and long service life High output performance and torque at low rpm R 916 Litronic R 926 Litronic 5

Safe reliable transport Standard, integrated tie-downs make transport both easy and safe 6 R 916 Litronic R 926 Litronic

Reliability Backed by more than 50 years experience designing and building hydraulic excavators, Liebherr designed the new Generation 6 Excavators to provide the maximum in reliability and performance. High stability undercarriage Improved force distribution High performance travel drive Technology with perspective Quality right down to the finest detail ROPS cab structure Ready for the demands of the future The new undercarriage concept of the Generation 6 crawler excavators increases performance and improves service life. The center section is extended to the ends of the side frames in an improved X frame design - resulting in improved distribution of load forces. Thanks to a powerful travel drive, the Generation 6 crawler excavators are well suited for travel and transport of loads across difficult terrain. The large sprocket reduces track vibrations and increases travel speed to 3.8 mph (6.1 km/h), making the R 916 and the R 926 the fastest excavators in their class. The layout of the hydraulic lines, lubrication lines and points, wiring harness, etc., all designed for maximum reliability. The cab is equipped with an integrated roll-over protection system (ROPS) in accordance with ISO 12117-2. The Liebherr system technology can be updated at any time by Liebherr Service personnel to a newer version - making it ready to meet the demands of the future and prepared for future developments and options. Key technologies Made by Liebherr Decades of experience in the development, engineering and production of components Engine, hydraulic pumps, transfer gears, travel drives, swing drives, swing rings, and electronic components all from the same source Main steel components, such as undercarriage, equipment modules, and superstructure, all designed by Liebherr Spare Parts Extensive USA spare parts inventory located at Liebherr s Newport News, Virginia headquarters Parts support is supplemented by the western USA warehouse located in Phoenix, Arizona 24 / 7 parts support with a dedicated after hours support number R 916 Litronic R 926 Litronic 7

Liebherr Premium Seat (option) Automatic body weight adjustment Active seat conditioning (to prevent sweat forming on the back) Low-frequency cushioning, including horizontally to absorb vibrations from the front and the rear 8 R 916 Litronic R 926 Litronic

Comfort Designed to the latest ergonomic standards, the operators cab provides exceptional comfort, ease of operation and an outstanding, wide view to the working area. For Liebherr, comfort also applies to service, with centrally located service points and easy, rapid access. Safe work with a clear layout A pleasant workplace The entirely new design of the R 916 and R 926 cab includes a two part, retractable windshield made of break-resistant double pane safety glass - also used in the roof and right-side glass. The cab meets ROPS requirements per ISO 12117-2. High-resolution color display Wide camera viewing field Fully automatic climate control system Minimal noise and vibration The 7-inch, high resolution color display features an integrated view from the rear-view camera. The screen can be operated via a rotating/pushbutton arrangement or via an optional touch screen and is designed to be glare free. The optional rearview camera for the R 916 and R 926, with a viewing angle of more than 120º, provides a complete view of the area behind the machine. The climate control system has more than 12 adjustable vents for individual control of air flow, and can be operated via the display. For heating operation, the fuel-saving Econ mode is available, in which the climate control compressor is switched off. The new cab on the Liebherr crawler excavator meets the European standards for noise emissions and whole-body vibrations. cab Features of the cab: Newly developed operators position as standard Air-suspension seat with automatic weight adjustment and horizontal suspension for maximum comfort standard For optimum ease of operation and fatigue-free work, the operating consoles pivot with the seat Extremely maintenance-friendly All maintenance points are easily accessible Daily routine servicing work can be carried out very rapidly, reliably, and in comfort Fully automatic central lubrication system - standard R 916 Litronic R 926 Litronic 9

Liebherr Tool Control Memory storage of up to ten tool settings (pressure and oil flow) User-defined name for each tool / attachment Once the new tool / attachment is chosen, the system sets and displays the pressure and flow rate 10 R 916 Litronic R 926 Litronic

Economical Crawler excavators from Liebherr guarantee maximum productivity. The optimized interaction of hydraulics and electronics means that individual movements as well as multiple functions can be performed at the same time without decreasing efficiency. Economical technology Costs savings thanks to fuel efficiency Fuel savings are achieved thanks to the integrated excavator system technology and the efficient engine and hydraulics management. When not performing a task, the sensor-controlled function automatically idles the engine, reducing fuel consumption and emissions. Value High quality Environmental protection and recycling Liebherr excavators are engineered and built to last, with high quality materials and superior workmanship - guaranteeing a long service life. All Liebherr engines meet the exhaust gas directives specified by law, of Stage IIIA/ Tier 3, which means reduced nitrogen oxide and fine dust emissions. With Liebherr, concern for the environment is extended to the whole machine. Up to 95 % of all the components from a Liebherr excavator can be recycled, and only lead-free paints are used. Innovative tooth system Patented tooth system, consisting of tooth holder, tooth, securing bolts, and protective plugs Teeth can be replaced rapidly and without the use of force Tooth shapes for every application Modular particle filter (optional) Reduction in fine dust emissions Consists of intake, filter, outlet, and muffler modules Certified in accordance with the VERT filter list Use is subject to state regulations R 916 Litronic R 926 Litronic 11

Technical Data R 916 R 916 Engine Rating per SAE J1349 154 HP (115 kw) at 1,800 rpm Rating per ISO 9249 157 HP (115 kw) at 1,800 rpm Model Liebherr D 934 S Type 4 cylinder in-line Bore/Stroke 4.80/5.35 in Displacement 388 in 3 Engine operation 4-stroke diesel unit pump system turbo-charged after-cooled and fuel cooled reduced emissions Cooling water-cooled and integrated motor oil cooler Air cleaner dry-type air cleaner with pre-cleaner, primary and safety elements Fuel tank 100 gal Electrical system Voltage 24 V Batteries 2 x 135 Ah/12 V Starter 24 V/6.6 kw Alternator three phase current 28 V/80 A Engine idling sensor-controlled Integrated engine management connection to the integrated system via CAN-BUS is available Hydraulic System Hydraulic system Positive Control. Dual circuit hydraulic system for independent and need-based quantity allotment via the hydraulic pumps; sensor-guided. Features high system dynamics and sensitivity provided by integrated system controlling Hydraulic pump Liebherr variable displacement pump built in transversal plate style, in parallel arrangement with integrated transfer box Max. flow 2 x 57 gpm Max. pressure 5,511 psi Pump management electronic pump management via the integrated system controlling (CAN-BUS) synchronous to the control block Hydraulic tank 77 gal Hydraulic system max. 132 gal Hydraulic oil filter 1 full flow filter (20 μm) in return line with integrated fine filter area (5 μm) Hydraulic oil cooler compact cooler, consisting of a water cooler, sandwiched with hydraulic oil cooler, fuel cooler and aftercooler cores and hydrostatically driven fan MODE selection adjustment of engine and hydraulic performance via a mode pre-selector to match application, e.g. for economical and environmentally friendly operation or for maximum digging per formance and heavy-duty jobs RPM adjustment stepless adjustment of engine output via rpm at each selected mode Liebherr Tool Control 10 preadjustable pump flows and pressures for addon tools Hydraulic Controls The controlling is conducted via the integrated system technology, input and output modules, communicated via the CAN-BUS with the electronic central unit. Power distribution via control valve with integrated safety valves Servo circuit Attachment and swing proportional via joystick levers Travel with proportionally functioning foot pedals or adjusted with removable levers speed pre-selection Additional functions proportional regulation via slide switches or foot pedals Swing Drive shockless and antireaction Drive Liebherr swash plate motor Transmission Liebherr compact planetary reduction gear Swing ring Liebherr, sealed single race ball bearing swing ring, internal teeth Swing speed 0 11 rpm stepless Swing torque 52,441 lbf ft Holding brake wet multi-disc (spring applied, pressure released) Operator s Cab Cab ROPS safety cab structure with individual windshields or featuring a slide-in subpart under the roof, work headlights integrated in the roof, a door with a side window (can be opened on both sides), large storage compartments, shock-absorbing suspension, sounddampening insulating, tinted laminated safety glass, separate window shades for the sunroof and windshield Operator s seat Liebherr-Air-Comfort seat, airsprung with automatic weight adjustment, vertical and horizontal seat dampening including consoles and joysticks. Seat and armrests adjustable separately and in combination, seat heating as standard Control system arm consoles, swinging with the seat Operation and displays large high resolution color display with self explanatory operation via touch screen or turn/push button, video capability, versatile adjusting, control and monitoring facilities, e.g. climate control, implement and tool parameters Air-conditioning standard automatic air-conditioning, ambient air function, fast de-icing and demisting at the press of a button, air vents can be operated via a menu; ambient air and fresh air filters can be easily replaced and are accessible from the outside; heating-cooling unit, designed for extreme outside temperatures, sensors for solar radiation, inside and outside temperatures Noise emission ISO 6396 L pa (inside cab) = 72 db(a) 2000/14/EC L WA (surround noise) = 102 db(a) Undercarriage LC standard gauge (7 10 ) Drive Liebherr swash plate motors with integrated brake valves on both sides Transmission Liebherr planetary reduction gears Travel speed low range 2.3 mph high range 3.8 mph Net drawbar pull on crawler 44,737 lbf Track components B 60, maintenance-free Track rollers/carrier rollers 8/2 Tracks sealed and greased Track pads triple-grouser Digging locks wet multi-discs (spring applied, pressure released) Brake valves integrated into travel motor Lashing eyes integrated Attachment Type combination of resilient steel plates and cast steels components Hydraulic cylinders Liebherr cylinders with special seal-system, shock absorbing Pivots sealed, low maintenance Lubrication automatic central lubrication system (except link and tilt geometry) Hydraulic connections pipes and hoses equipped with SAE split-flange connections Bucket fitted as standard with Liebherr tooth system 12 R 916 Litronic R 926 Litronic

Dimensions E D A R 916 W H C K Q P X V L U Z N S B G ft in A 8 2 C 10 D 9 7 E 9 8 H 7 11 K 3 8 L 12 P 3 2 Q 18 S 7 10 U 14 10 N 20 24 30 35 B 9 9 9 9 10 3 10 9 G 9 9 9 9 10 9 10 9 Z 16 6 Gooseneck Boom 18 8 Stick length ft in 7 3 7 10 8 10 9 10 V ft in 18 10 18 3 17 5 16 5 W ft in 9 8 9 8 9 10 10 X ft in 31 31 31 2 31 2 Straight Gooseneck Boom 19 8 Stick length ft in 7 3 7 10 8 10 9 10 V ft in 20 6 20 19 4 18 6 W ft in 9 2 9 4 9 8 10 X ft in 32 6 32 6 32 6 32 6 E = Tail radius G = Width with removable steps R 916 Litronic R 926 Litronic 13

Backhoe Attachment with Gooseneck Boom 18 8 and Heavy Duty Counterweight R 916 ft 30 25 20 m 10 9 8 7 6 Digging Envelope with Quick Change Adapter 1 2 3 4 Stick lengths ft in 7 3 7 10 8 10 9 10 Max. digging depth ft in 19 10 20 6 21 6 22 6 Max. reach at ground level ft in 30 6 31 2 32 33 Max. dump height ft in 20 6 20 10 21 2 21 8 Max. teeth height ft in 30 4 30 8 31 2 31 8 15 10 5 5 4 3 2 1 Digging Forces without Quick Change Adapter 1 2 3 4 Digging force ISO lbf 31,248 29,675 27,202 25,403 lb 31,305 29,762 27,116 25,353 Breakout force ISO lbf 40,241 40,241 40,241 40,241 lb 40,123 40,123 40,123 40,123 0 0 with Quick Change Adapter -5-10 -1-2 -3 Digging force ISO lbf 29,900 28,326 26,078 24,279 lb 29,982 28,219 26,014 24,250 Breakout force ISO lbf 34,845 34,845 34,845 34,845 lb 34,832 34,832 34,832 34,832-15 -4-5 Operating Weight and Ground Pressure -20-25 -6-7 -8 11 10 35 9 30 8 25 7 6 20 1 2 3 4 5 4 3 15 10 2 5 1 0m 0 ft Operating weight includes basic machine with heavy duty counterweight, gooseneck boom 18 8, stick 7 10, quick change adapter 48 and bucket 1.24 yd 3. Undercarriage Pad width in 20 24 30 Weight lb 54,675 55,336 56,328 Ground pressure psi 8.8 7.5 6.1 LC Buckets Machine stability per ISO 10567* (75 % of tipping capacity) Cutting width Capacity ISO 7451 Weight in yd 3 lb 41 1) 1.24 1,543 49 1) 1.50 1,720 55 1) 1.77 1,896 59 1) 1.90 1,984 63 1) 2.03 2,072 41 2) 1.24 1,565 49 2) 1.50 1,742 55 2) 1.77 1,918 59 2) 1.90 2,006 63 2) 2.03 2,094 LC-Undercarriage Stick length (ft in) 7 3 7 10 8 10 9 10 Y Y Y V Y V V y V y y y Y Y V V V V V y V V y y * Indicated loads are based on ISO 10567 max. stick length, lifted 360 on firm 1) Bucket without quick change adapter 2) Bucket with quick change adapter Other backhoes available on request Max. material weight Y = 3,034 lb/yd 3, V = 2,528 lb/yd 3, y = 2,023 lb/yd 3, v = not authorized 14 R 916 Litronic R 926 Litronic

Lift Capacities with Gooseneck Boom 18 8 and Heavy Duty Counterweight Stick 7 3 3 Stick 7 10 3 R 916 2 8,6* 8,6* 18 2 7,9* 7,9* 18 10 2 12,4* 12,4* 8,1* 8,1* 22 2 2 11,9* 11,9* 7,4* 7,4* 22 11 1 15,8* 15,8* 12,9 13,3* 8,2* 8,2* 24 10 1 12,9* 12,9* 8,9* 8,9* 7,5* 7,5* 25 5 1 18,6 19,5* 12,2 14,9* 8,7 12,7* 8,2 8,7* 26 1 29,2* 29,2* 18,8 18,9* 12,2 14,6* 8,7 12,4* 7,8* 7,8* 26 8 17,3 22,6* 11,6 16,5* 8,4 12,9 7,8 9,6* 26 4 17,4 22,2* 11,6 16,2* 8,4 12,9 7,5 8,7* 27 18,4* 18,4* 16,6 23,8* 11,1 17,3* 8,2 12,7 7,9 11,3* 25 8 18,9* 18,9* 16,6 23,7* 11,1 17,2* 8,1 12,7 7,6 10,1* 26 3 30,2* 30,2* 16,5 23,0* 11,0 17,0* 8,7 13,5 23 11 29,0* 29,0* 16,4 23,1* 10,9 17,0* 8,3 12,9* 24 7 1 27,6* 27,6* 16,7 20,2* 11,1 14,8* 10,6 14,0* 20 9 1 28,6* 28,6* 16,6 20,6* 11,0 15,2* 10,0 13,6* 21 7 1 19,1* 19,1* 14,0* 14,0* 13,4* 13,4* 15 6 1 20,6* 20,6* 15,1* 15,1* 13,4* 13,4* 16 7 Stick 8 10 3 Stick 9 10 3 2 7,3* 7,3* 6,9* 6,9* 20 2 2 6,1* 6,1* 21 5 2 11,2* 11,2* 6,5* 6,5* 24 2 6,0* 6,0* 5,8* 5,8* 25 1 1 12,3* 12,3* 9,0 10,5* 6,5* 6,5* 26 4 1 11,7* 11,7* 9,1 10,8* 5,7* 5,7* 27 4 1 28,7* 28,7* 18,0* 18,0* 12,3 14,0* 8,7 12,0* 6,8* 6,8* 27 7 1 26,3* 26,3* 17,1* 17,1* 12,4 13,5* 8,7 11,6* 6,0* 6,0* 28 7 15,7* 15,7* 17,5 21,6* 11,6 15,8* 8,4 12,9* 7,1 7,5* 27 11 19,5* 19,5* 17,6 20,9* 11,6 15,3* 8,4 12,6* 6,5* 6,5* 28 10 19,4* 19,4* 16,6 23,4* 11,1 16,9* 8,1 12,6 7,2 8,6* 27 3 19,9* 19,9* 16,6 23,1* 11,1 16,7* 8,1 12,6 6,8 7,4* 28 3 27,5* 27,5* 16,3 23,3* 10,8 17,0* 8,0 12,5 7,7 10,7* 25 7 26,4* 26,4* 16,2 23,3* 10,8 17,0* 7,9 12,4 7,2 9,1* 26 7 1 30,1* 30,1* 16,4 21,2* 10,9 15,6* 9,2 13,1* 22 9 1 31,3* 31,3* 16,3 21,7* 10,7 16,0* 8,5 12,5* 23 11 1 22,7* 22,7* 16,5* 16,5* 13,0 13,1* 18 1 1 24,7* 24,7* 16,7 17,6* 11,5 12,8* 19 6 Height Can be slewed though 360 In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity The lift capacities on the load hook of the Liebherr quick change adapter 48 without attachment are stated in lb x 1,000, and can be lifted 360 on firm, level supporting surface. Adjacent values are valid for the undercarriage when in the longitudinal position. Capacities are valid for 30 wide triple-grouser pads. Indi cated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated by *) or are limited through the allowed lift capacity of the load hook on the quick change adapter (26,455 lb). Without quick change adapter the lift capacities will increase by 551 lb, without bucket cylinder, link and lever they increase by an additional 816 lb. R 916 Litronic R 926 Litronic 15

Backhoe Attachment with Straight Gooseneck Boom 19 8 and Heavy Duty Counterweight R 916 ft 35 30 25 20 15 10 5 0-5 -10-15 -20 m 12 11 10 9 8 7 6 5 4 3 2 1 0-1 -2-3 -4-5 -6 1 2 3 4 Digging Envelope with Quick Change Adapter 1 2 3 4 Stick lengths ft in 7 3 7 10 8 10 9 10 Max. digging depth ft in 18 3 18 10 19 10 20 10 Max. reach at ground level ft in 31 10 32 6 33 6 34 3 Max. dump height ft in 24 1 24 5 25 3 25 11 Max. teeth height ft in 34 7 35 1 35 9 36 5 Digging Forces without Quick Change Adapter 1 2 3 4 Digging force ISO lbf 31,248 29,675 27,202 25,403 lb 31,305 29,762 27,116 25,353 Breakout force ISO lbf 40,241 40,241 40,241 40,241 lb 40,123 40,123 40,123 40,123 with Quick Change Adapter Digging force ISO lbf 29,900 28,326 26,078 24,279 lb 29,982 28,219 26,014 24,250 Breakout force ISO lbf 34,845 34,845 34,845 34,845 lb 34,832 34,832 34,832 34,832 Operating Weight and Ground Pressure Operating weight includes basic machine with heavy duty counterweight, straight gooseneck boom 19 8, stick 7 10, quick change adapter 48 and bucket 1.24 yd 3. Undercarriage LC -7 11 10 35 9 30 8 25 7 6 20 5 4 15 3 10 2 5 1 0m 0 ft Pad width in 20 24 30 Weight lb 54,785 55,446 56,438 Ground pressure psi 8.8 7.5 6.3 Buckets Machine stability per ISO 10567* (75 % of tipping capacity) Cutting width Capacity ISO 7451 Weight in yd 3 lb 41 1) 1.24 1,543 49 1) 1.50 1,720 55 1) 1.77 1,896 59 1) 1.90 1,984 63 1) 2.03 2,072 41 2) 1.24 1,565 49 2) 1.50 1,742 55 2) 1.77 1,918 59 2) 1.90 2,006 63 2) 2.03 2,094 LC-Undercarriage Stick length (ft in) 7 3 7 10 8 10 9 10 Y Y V V V V y y y y y y Y Y Y V V V V y V y y y y y y v * Indicated loads are based on ISO 10567 max. stick length, lifted 360 on firm 1) Bucket without quick change adapter 2) Bucket with quick change adapter Other backhoes available on request Max. material weight Y = 3,034 lb/yd 3, V = 2,528 lb/yd 3, y = 2,023 lb/yd 3, v = not authorized 16 R 916 Litronic R 926 Litronic

Lift Capacities with Straight Gooseneck Boom 19 8 and Heavy Duty Counterweight Stick 7 3 3 Stick 7 10 3 R 916 2 8,7* 8,7* 19 11 2 10,2* 10,2* 7,9* 7,9* 20 10 2 16,0* 16,0* 13,1 13,9* 8,2* 8,2* 23 10 2 13,1 13,5* 7,5* 7,5* 24 7 1 27,0* 27,0* 18,5* 18,5* 12,6 14,8* 8,8 12,7* 8,1* 8,1* 26 3 1 25,7* 25,7* 17,9* 17,9* 12,6 14,4* 8,8 12,5* 7,4* 7,4* 26 10 1 18,0 21,6* 11,9 16,1* 8,5 13,0 7,3 8,5* 27 5 1 18,1 21,1* 11,9 15,8* 8,5 13,0* 7,1 7,7* 28 1 16,7 23,5* 11,2 17,0* 8,2 12,7 7,0 9,2* 27 9 16,7 23,3* 11,2 16,9* 8,2 12,7 6,8 8,3* 28 5 16,2 23,1* 10,8 17,1* 8,0 12,5 7,2 10,5* 27 1 12,5* 12,5* 16,1 23,2* 10,8 17,1* 7,9 12,4 6,9 9,4* 27 9 24,4* 24,4* 16,2 20,8* 10,7 15,9* 8,0 11,8* 7,8 11,5* 25 5 23,5* 23,5* 16,1 21,2* 10,6 16,0* 7,9 12,1* 7,5 11,2* 26 2 1 20,1* 20,1* 16,4 16,8* 10,9 12,8* 9,3 10,5* 22 7 1 21,5* 21,5* 16,3 17,4* 10,8 13,3* 8,8 10,4* 23 4 1 1 Stick 8 10 3 8,2* 8,2* 16 4 Stick 9 10 3 7,1* 7,1* 18 2 11,1* 11,1* 7,0* 7,0* 22 1 2 11,1* 11,1* 6,2* 6,2* 23 4 2 12,9* 12,9* 8,6* 8,6* 6,5* 6,5* 25 8 2 12,3* 12,3* 9,1 9,7* 5,8* 5,8* 26 9 1 17,1* 17,1* 12,7 13,9* 8,8 12,1* 6,5* 6,5* 27 11 1 16,3* 16,3* 12,8 13,4* 8,9 11,7* 5,7* 5,7* 28 11 1 18,3 20,4* 11,9 15,4* 8,5 12,7* 6,7 6,7* 29 1 1 31,5* 31,5* 18,5 19,7* 12,0 14,9* 8,5 12,4* 6,0* 6,0* 5,9* 5,9* 30 16,9 22,9* 11,2 16,6* 8,1 12,7 6,4 7,2* 29 4 17,0 22,5* 11,3 16,3* 8,1 12,6 6,1 7,5* 6,1 6,3* 30 3 13,7* 13,7* 16,1 23,3* 10,7 17,0* 7,9 12,4 6,5 8,1* 28 9 14,4* 14,4* 16,1 23,3* 10,7 16,9* 7,8 12,3 6,1 7,0* 29 8 22,3* 22,3* 15,9 21,7* 10,5 16,2* 7,8 12,3 7,0 9,6* 27 2 21,4* 21,4* 15,8 22,1* 10,5 16,4* 7,7 12,2 6,5 8,2* 28 2 1 23,5* 23,5* 16,1 18,3* 10,6 13,9* 8,1 10,1* 24 6 1 25,4* 25,4* 15,9 19,1* 10,5 14,4* 7,8 10,4* 7,5 9,8* 25 7 1 12,5* 12,5* 8,6* 8,6* 8,4* 8,4* 20 3 1 13,8* 13,8* 10,0* 10,0* 8,5* 8,5* 21 7 Height Can be slewed though 360 In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity The lift capacities on the load hook of the Liebherr quick change adapter 48 without attachment are stated in lb x 1,000, and can be lifted 360 on firm, level supporting surface. Adjacent values are valid for the undercarriage when in the longitudinal position. Capacities are valid for 30 wide triple-grouser pads. Indi cated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated by *) or are limited through the allowed lift capacity of the load hook on the quick change adapter (26,455 lb). Without quick change adapter the lift capacities will increase by 551 lb, without bucket cylinder, link and lever they increase by an additional 816 lb. R 916 Litronic R 926 Litronic 17

Standard Equipment R 916 Undercarriage Lifetime-lubricated track rollers Tracks sealed and greased Three piece track guide Sprocket with dirt ejector Lashing eyes Two-stage travel motors Uppercarriage Handrails, non slip surfaces Engine hood with lift assistance Sound insulation Maintenance-free swing brake lock Maintenance-free HD-batteries Lockable tool box Tool kit Hydraulics Hydraulic tank shut-off valve and pumps Pressure test ports for hydraulic Pressure storage for controlled lowering of equipment with engine turned off Electronic pump regulation Filter with integrated fine filter area (5 µm) Stepless work mode selector Positive Control Regeneration Plus function on hydraulic circuit Electronic control logic Engine Turbo charger Conform with level IIIA / Tier 3 emission standard After-cooled Unit pump system injection Sensor controlled engine idling Dry-type air cleaner w/pre-cleaner, main and safety element Operator s Cab Storage compartment Mechanical hour meters, readable from outside the cab Sunroof, right window and windshield with safety glass Control cab Completely retractable windshield Front windshield (bottom) retractable Closed storage space Rubber floor mat Dome light Coat hook Automatic air conditioning Fuel consumption indicator Liebherr-Air-Comfort seat heated with air-suspension 7 color multifunction display with touchscreen Emergency exit rear window Preparation for radio installation Single piece right-side window (no post) Rain visor over front window opening Tinted windows Door with sliding window Height-adjustable operating console Seat belt Sun roller blind Load bearing sectional profile structure, covered with deep-drawn panels Wiper/washer Cigarette lighter and ashtray Two flood lights under rain visor Attachment Two separate pins for hoist cylinder with cast parts 26,455 lb lifting hook with safety link on quick-coupler Liebherr full-automatic central lubrication system (except connecting link for bucket kinematics) Additional work light on boom (right) Cylinders with shock absorbers Load hold valves on hoist cylinders = Standard 18 R 916 Litronic R 926 Litronic

Individual Options Undercarriage Wide step + Reinforced base panel + Reinforced cover and base panel + Straight track guide + D6C conversion kit with 3-piece track guide + Tractive force increase + Uppercarriage Electric refuel pump + Reversible fan drive + Customized colors + Extended tool kit + Hydraulics Add-on kit rotary drive (including routing) + Bio-degradable hydr. oil + Grapple operation (including routing) + Liebherr proportional control system + Liebherr Tool Control + Bypass filter + Return filter for hammer + Engine Fuel pre-heating + Liebherr particle filter + Air pre-filter with dust trap + Automatic engine shut-down (adjustable time-period) + Operator s Cab Fire extinguisher + Foot support + Electric cooler + Cab with bullet-proof glass (front and roof windows) and roof window wipers + LIDAT Standard (Liebherr data transfer system) + LIDAT Plus (extended Liebherr data transfer system) + Air pressure operator seat Premium operator seat + Engine shut-down (via push-button) in cab + Bullet-proof roof glass panel with wiper + Radio with SD-/MMC-card, Aux-in + Rear view monitoring with camera + Beacon + Wiper for sunroof + Xenon headlights + Protective grid up FOPS + Protective grid front FGPS + Sun visor + Roof sun screen + Auxiliary heating with timer + Change over controls for clamshell bucket/grapple + Electronic theft protection + Additional halogen headlights behind cab + Additional halogen headlights front cab + Attachment Adjustable boom + Adjustable offset boom + Hoist cylinder depth limitation + Security for hoist cylinders + Piston rod cover bucket cylinder + 26,455 lb lifting hook on bucket + LIKUFIX + Liebherr line of buckets + Straight gooseneck boom + Safety check valves hoist cylinder + Safety check valves stick cylinder + Hose-protecting lubrication system (stick rear) + Hydr. or mechanical quick change coupler + Overload warning device + Central lubrication of the connecting link for bucket kinematics + Working headlight on boom (left) + R 916 = Standard, + = Option R 916 Litronic R 926 Litronic 19

Technical Data R 926 R 926 Engine Rating per SAE J 1349 173 HP (129 kw) at 1,800 rpm Rating per ISO 9249 175 HP (129 kw) at 1,800 rpm Model Liebherr D 934 S Type 4 cylinder in-line Bore/Stroke 4.80/5.35 in Displacement 388 in 3 Engine operation 4-stroke diesel unit pump system turbo-charged after-cooled and fuel cooled reduced emissions Cooling water-cooled and integrated motor oil cooler Air cleaner dry-type air cleaner with pre-cleaner, primary and safety elements Fuel tank 100 gal Electrical system Voltage 24 V Batteries 2 x 135 Ah/12 V Starter 24 V/6.6 kw Alternator three phase current 28 V/80 A Engine idling sensor-controlled Integrated motor management connection to the integrated system via CAN-BUS is available Hydraulic System Hydraulic system Positive Control. Dual circuit hydraulic system for independent and need-based quantity allotment via the hydraulic pumps; sensor-guided. Features high system dynamics and sensitivity provided by integrated system controlling Hydraulic pump Liebherr variable displacement pump built in transversal plate style, in parallel arrangement with integrated transfer box Max. flow 2 x 63 gpm Max. pressure 5,511 psi Pump management electronic pump management via the integrated system controlling (CAN-BUS) synchronous to the control block Hydraulic tank 77 gal Hydraulic system max. 132 gal Hydraulic oil filter 1 full flow filter (20 μm) in return line with integrated fine filter area (5 μm) Hydraulic oil cooler compact cooler, consisting of a water cooler, sandwiched with hydraulic oil cooler, fuel cooler and aftercooler cores and hydrostatically driven fan MODE selection adjustment of engine and hydraulic performance via a mode pre-selector to match application, e.g. for economical and environmentally friendly operation or for maximum digging per formance and heavy-duty jobs RPM adjustment stepless adjustment of engine output via rpm at each selected mode Liebherr Tool Control 10 preadjustable pump flows and pressures for addon tools Hydraulic Controls The controlling is conducted via the integrated system technology, input and output modules, communicated via the CAN-BUS with the electronic central unit. Power distribution via control valve with integrated safety valves Servo circuit Attachment and swing proportional via joystick levers Travel with proportionally functioning foot pedals or adjusted with removable levers speed pre-selection Additional functions proportional regulation via slide switches or foot pedals Swing Drive shockless and antireaction Drive Liebherr swash plate motor Transmission Liebherr compact planetary reduction gear Swing ring Liebherr, sealed single race ball bearing swing ring, internal teeth Swing speed 0 11 rpm stepless Swing torque 58,297 lbf ft Holding brake wet multi-disc (spring applied, pressure released) Operator s Cab Cab ROPS safety cab structure with individual windshields or featuring a slide-in subpart under the roof, work headlights integrated in the roof, a door with a side window (can be opened on both sides), large storage compartments, shock-absorbing suspension, sounddampening insulating, tinted laminated safety glass, separate window shades for the sunroof and windshield Operator s seat Liebherr-Air-Comfort seat, airsprung with automatic weight adjustment, vertical and horizontal seat dampening including consoles and joysticks. Seat and armrests adjustable separately and in combination, seat heating as standard Control system arm consoles, swinging with the seat Operation and displays large high resolution color display with self explanatory operation via touch screen or turnpush button, video capability, versatile adjusting, control and monitoring facilities, e.g. climate control, implement and tool parameters Air-conditioning standard automatic air-conditioning, ambient air function, fast de-icing and demisting at the press of a button, air vents can be operated via a menu; ambient air and fresh air filters can be easily replaced and are accessible from the outside; heating-cooling unit, designed for extreme outside temperatures, sensors for solar radiation, inside and outside temperatures Noise emission ISO 6396 L pa (inside cab) = 72 db(a) 2000/14/EC L WA (surround noise) = 103 db(a) Undercarriage LC standard gauge (7 10 ) Drive Liebherr swash plate motors with integrated brake valves on both sides Transmission Liebherr planetary reduction gears Travel speed low range 2.3 mph high range 3.8 mph Net drawbar pull on crawler 50,807 lbf Track components B 60, maintenance-free Track rollers/carrier rollers 9/2 Tracks sealed and greased Track pads triple-grouser Digging locks wet multi-discs (spring applied, pressure released) Brake valves integrated into travel motor Lashing eyes integrated Attachment Type combination of resilient steel plates and cast steels components Hydraulic cylinders Liebherr cylinders with special seal-system, shock absorbing Pivots sealed, low maintenance Lubrication automatic central lubrication system (except link and tilt geometry) Hydraulic connections pipes and hoses equipped with SAE split-flange connections Bucket fitted as standard with Liebherr tooth system 20 R 916 Litronic R 926 Litronic

Dimensions E D A W H C R 926 K Q P X V L U Z N S B G ft in A 8 2 C 10 D 9 7 E 9 8 H 7 11 K 3 8 L 12 7 P 3 2 Q 18 S 7 10 U 15 5 N 20 24 30 B 9 9 9 9 10 3 G 9 9 9 9 10 9 Z 17 4 Gooseneck Boom 19 4 Stick length ft in 7 3 7 10 8 10 9 10 V ft in 19 10 19 4 18 4 17 9 W ft in 9 8 9 10 10 10 2 X ft in 32 4 32 4 32 4 32 6 Straight Gooseneck Boom 19 8 Stick length ft in 7 3 7 10 8 10 9 10 V ft in 20 10 20 4 19 8 18 10 W ft in 9 2 9 4 9 8 10 X ft in 32 10 32 10 32 10 32 10 E = Tail radius G = Width with removable steps R 916 Litronic R 926 Litronic 21

Backhoe Attachment with Gooseneck Boom 19 4 and Heavy Duty Counterweight R 926 ft 35 30 25 20 15 10 5 m 11 10 9 8 7 6 5 4 3 2 1 Digging Envelope with Quick Change Adapter 1 2 3 4 Stick lengths ft in 7 3 7 10 8 10 9 10 Max. digging depth ft in 20 6 21 2 22 2 23 2 Max. reach at ground level ft in 31 2 31 10 32 10 33 8 Max. dump height ft in 20 10 21 4 21 8 22 2 Max. teeth height ft in 30 10 31 2 31 8 32 2 Digging Forces without Quick Change Adapter 1 2 3 4 Digging force ISO lbf 35,969 33,946 31,248 29,000 lb 35,935 33,951 31,306 28,881 Breakout force ISO lbf 43,388 43,388 43,388 43,388 lb 43,431 43,431 43,431 43,431 with Quick Change Adapter 0-5 0-1 -2 Digging force ISO lbf 34,171 32,373 29,900 27,876 lb 34,172 32,408 29,983 27,778 Breakout force ISO lbf 37,768 37,768 37,768 37,768 lb 37,699 37,699 37,699 37,699-10 -15-20 -25-3 -4-5 -6-7 -8 11 10 35 9 30 8 25 7 6 20 1 2 34 5 4 3 15 10 2 5 1 0 m 0 ft Operating Weight and Ground Pressure Operating weight includes basic machine with heavy duty counterweight, gooseneck boom 19 4, stick 8 10, quick change adapter 48 and bucket 1.24 yd 3. Undercarriage Pad width in 20 24 30 Weight lb 58,643 59,194 60,848 Ground pressure psi 9.1 7.7 6.4 LC Buckets Machine stability per ISO 10567* (75% of tipping capacity) LC-Undercarriage Cutting width Capacity ISO 7451 Weight in yd 3 lb 41 1) 1.24 1,543 49 1) 1.50 1,720 55 1) 1.77 1,896 59 1) 1.90 1,984 63 1) 2.03 2,072 41 2) 1.24 1,565 49 2) 1.50 1,742 55 2) 1.77 1,918 59 2) 1.90 2,006 63 2) 2.03 2,094 Stick length (ft in) 7 3 7 10 8 10 9 10 Y Y Y V Y Y Y V Y Y V y * Indicated loads are based on ISO 10567 max. stick length, lifted 360 on firm 1) Bucket without quick change adapter 2) Bucket with quick change adapter Other backhoes available on request Max. material weight Y = 3,034 lb/yd 3, V = 2,528 lb/yd 3, y = 2,023 lb/yd 3, v = not authorized 22 R 916 Litronic R 926 Litronic

Lift Capacities with Gooseneck Boom 19 4 and Heavy Duty Counterweight Stick 7 3 3 2 9,3* 9,3* 18 10 Stick 7 10 3 2 8,5* 8,5* 19 9 R 926 2 14,4* 14,4* 8,9* 8,9* 22 11 2 13,9* 13,9* 8,1* 8,1* 23 8 1 18,9* 18,9* 14,5 15,8* 10,2 10,9* 9,0* 9,0* 25 4 1 18,1* 18,1* 14,5 15,3* 10,2 12,3* 8,2* 8,2* 26 1 1 20,8 23,5* 13,8 17,8* 9,9 15,1* 9,0 9,5* 26 8 1 20,9 22,8* 13,8 17,4* 9,9 14,8* 8,6 8,7* 27 4 19,4 27,2* 13,1 19,7* 9,6 15,5 8,6 10,6* 27 19,5 26,7* 13,1 19,4* 9,6 15,5 8,3 9,5* 27 7 17,7* 17,7* 18,8 28,4* 12,6 20,7* 9,3 15,2 8,7 12,4* 26 3 18,9* 18,9* 18,8 28,3* 12,6 20,5* 9,3 15,2 8,4 11,1* 26 11 32,0* 32,0* 18,7 27,4* 12,5 20,4* 9,5 15,6 24 7 30,8* 30,8* 18,6 27,6* 12,4 20,4* 9,2 15,1 9,1 14,0* 25 2 1 32,9* 32,9* 18,9 24,4* 12,6 18,2* 11,4 16,5* 21 6 1 34,2* 34,2* 18,8 24,9* 12,5 18,6* 10,8 16,0* 22 4 1 24,0* 24,0* 18,0* 18,0* 16,1* 16,1* 16 6 1 25,6* 25,6* 19,1* 19,1* 15,6 16,0* 17 6 Stick 8 10 3 Stick 9 10 3 2 7,5* 7,5* 21 1 2 6,7* 6,7* 22 4 2 13,2* 13,2* 7,2* 7,2* 24 9 2 8,5* 8,5* 6,4* 6,4* 25 10 1 14,6* 14,6* 10,3 13,1* 7,2* 7,2* 27 1 1 13,9* 13,9* 10,3 12,8* 6,4* 6,4* 28 1 34,8* 34,8* 21,2 21,8* 13,9 16,8* 9,9 14,3* 7,5* 7,5* 28 3 1 32,8* 32,8* 20,7* 20,7* 13,9 16,1* 9,9 13,9* 6,6* 6,6* 29 2 19,6 26,0* 13,1 18,9* 9,5 15,4* 7,8 8,2* 28 6 17,5* 17,5* 19,8 25,2* 13,1 18,4* 9,5 15,0* 7,2* 7,2* 29 6 19,7* 19,7* 18,8 28,0* 12,6 20,3* 9,2 15,1 7,9 9,5* 27 10 20,3* 20,3* 18,8 27,7* 12,6 20,0* 9,2 15,1 7,5 8,2* 28 10 29,2* 29,2* 18,5 27,8* 12,3 20,5* 9,1 15,0 8,5 11,7* 26 3 28,0* 28,0* 18,4 27,9* 12,2 20,4* 9,0 14,9 8,0 10,0* 27 3 1 35,9* 35,9* 18,6 25,5* 12,4 19,0* 10,0 15,4* 23 5 1 35,8 37,4* 18,5 26,1* 12,2 19,3* 9,3 13,5* 24 7 1 28,0* 28,0* 19,1 20,5* 13,7 15,6* 18 11 1 30,1* 30,1* 18,9 21,7* 12,6 15,6* 12,3 15,2* 20 4 Height Can be slewed though 360 In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity The lift capacities on the load hook of the Liebherr quick change adapter 48 without attachment are stated in lb x 1,000, and can be lifted 360 on firm, level supporting surface. Adjacent values are valid for the undercarriage when in the longitudinal position. Capacities are valid for 30 wide triple-grouser pads. Indi cated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated by *) or are limited through the allowed lift capacity of the load hook on the quick change adapter (26,455 lb). Without quick change adapter the lift capacities will increase by 551 lb, without bucket cylinder, link and lever they increase by an additional 827 lb. R 916 Litronic R 926 Litronic 23

Backhoe Attachment with Straight Gooseneck Boom 19 8 and Heavy Duty Counterweight R 926 ft 35 30 25 m 12 11 10 9 8 7 Digging Envelope with Quick Change Adapter 1 2 3 4 Stick lengths ft in 7 3 7 10 8 10 9 10 Max. digging depth ft in 18 3 18 10 19 10 20 10 Max. reach at ground level ft in 31 10 32 6 33 6 34 3 Max. dump height ft in 24 1 24 5 25 3 25 11 Max. teeth height ft in 34 7 35 1 35 9 36 5 20 15 10 5 0-5 -10-15 -20 6 5 4 3 2 1 0-1 -2-3 -4-5 -6-7 11 10 35 9 30 8 25 7 6 20 1 2 3 4 5 15 4 3 10 2 5 1 0 m 0 ft Digging Forces without Quick Change Adapter 1 2 3 4 Digging force ISO lbf 35,969 33,946 31,248 29,000 lb 35,935 33,951 31,306 28,881 Breakout force ISO lbf 43,388 43,388 43,388 43,388 lb 43,431 43,431 43,431 43,431 with Quick Change Adapter Digging force ISO lbf 34,171 32,373 29,900 27,876 lb 34,172 32,408 29,983 27,778 Breakout force ISO lbf 37,768 37,768 37,768 37,768 lb 37,699 37,699 37,699 37,699 Operating Weight and Ground Pressure Operating weight includes basic machine with heavy duty counterweight, straight gooseneck boom 19 8, stick 8 10, quick change adapter 48 and bucket 1.24 yd 3. Undercarriage LC Pad width in 20 24 30 Weight lb 58,643 59,194 60,848 Ground pressure psi 9.1 7.7 6.4 Buckets Machine stability per ISO 10567* (75 % of tipping capacity) Cutting width Capacity ISO 7451 Weight in yd 3 lb 41 1) 1.24 1,543 49 1) 1.50 1,720 55 1) 1.77 1,896 59 1) 1.90 1,984 63 1) 2.03 2,072 41 2) 1.24 1,565 49 2) 1.50 1,742 55 2) 1.77 1,918 59 2) 1.90 2,006 63 2) 2.03 2,094 LC-Undercarriage Stick length (ft in) 7 3 7 10 8 10 9 10 Y Y Y V Y Y Y V Y V V y * Indicated loads are based on ISO 10567 max. stick length, lifted 360 on firm 1) Bucket without quick change adapter 2) Bucket with quick change adapter Other backhoes available on request Max. material weight Y = 3,034 lb/yd 3, V = 2,528 lb/yd 3, y = 2,023 lb/yd 3, v = not authorized 24 R 916 Litronic R 926 Litronic

Lift Capacities with Straight Gooseneck Boom 19 8 and Heavy Duty Counterweight Stick 7 3 3 2 9,5* 9,5* 20 Stick 7 10 3 2 11,3* 11,3* 8,7* 8,7* 20 10 R 926 2 19,2* 19,2* 14,8 16,6* 8,9* 8,9* 23 10 2 14,9 16,2* 8,2* 8,2* 24 6 1 32,3* 32,3* 22,1 22,2* 14,3 17,8* 10,1 14,3* 8,9* 8,9* 26 3 1 30,7* 30,7* 21,5* 21,5* 14,3 17,4* 10,1 14,9* 8,1* 8,1* 26 10 1 20,5 26,0* 13,6 19,4* 9,8 15,8 8,5 9,3* 27 6 1 20,6 25,5* 13,6 19,1* 9,8 15,7* 8,2 8,5* 28 1 19,2 28,4* 12,9 20,6* 9,5 15,4 8,2 10,1* 27 9 19,2 28,1* 12,9 20,4* 9,5 15,4 7,9 9,1* 28 4 18,7 27,9* 12,5 20,7* 9,3 15,2 8,3 11,5* 27 1 14,6* 14,6* 18,6 28,0* 12,5 20,7* 9,2 15,1 8,0 10,4* 27 8 28,3* 28,3* 18,6 25,3* 12,4 19,3* 9,3 14,4* 9,1 14,0* 25 5 27,2* 27,2* 18,5 25,7* 12,3 19,5* 9,2 14,8* 8,7 12,6* 26 1 24,7* 24,7* 18,9 20,5* 12,6 15,7* 10,8 13,0* 22 6 1 26,3* 26,3* 18,8 21,3* 12,5 16,2* 10,2 12,8* 23 3 1 1 Stick 8 10 3 8,9* 8,9* 16 4 Stick 9 10 3 7,8* 7,8* 18 1 2 12,2* 12,2* 7,6* 7,6* 22 1 2 12,2* 12,2* 6,8* 6,8* 23 5 2 15,0 15,5* 9,5* 9,5* 7,2* 7,2* 25 8 2 14,7* 14,7* 10,4 10,6* 6,4* 6,4* 26 10 1 20,5* 20,5* 14,4 16,8* 10,2 14,7* 7,1* 7,1* 27 10 1 19,5* 19,5* 14,5 16,2* 10,2 14,2* 6,3* 6,3* 28 11 1 20,8 24,6* 13,7 18,6* 9,8 15,4* 7,4* 7,4* 29 1 1 37,9* 37,9* 21,1 23,7* 13,7 18,1* 9,8 15,1* 6,6* 6,6* 6,5* 6,5* 30 19,3 27,7* 12,9 20,1* 9,4 15,4 7,5 7,9* 29 4 19,5 27,1* 13,0 19,8* 9,4 15,4 7,2 8,3* 7,0* 7,0* 30 3 16,0* 16,0* 18,6 28,2* 12,4 20,6* 9,2 15,1 7,6 8,9* 28 8 16,7* 16,7* 18,6 28,2* 12,4 20,5* 9,1 15,0 7,2 7,7* 29 8 25,9* 25,9* 18,4 26,3* 12,2 19,7* 9,1 14,9 8,1 10,6* 27 2 24,8* 24,8* 18,3 26,8* 12,2 19,9* 9,0 14,9 7,7 9,1* 28 2 1 28,8* 28,8* 18,6 22,3* 12,3 17,0* 9,5 12,5* 24 5 1 31,0* 31,0* 18,4 23,3* 12,2 17,6* 9,1 12,8* 8,8 11,7* 25 7 1 15,4* 15,4* 10,7* 10,7* 10,5* 10,5* 20 2 1 17,0* 17,0* 12,4* 12,4* 10,6* 10,6* 21 7 Height Can be slewed though 360 In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity The lift capacities on the load hook of the Liebherr quick change adapter 48 without attachment are stated in lb x 1,000, and can be lifted 360 on firm, level supporting surface. Adjacent values are valid for the undercarriage when in the longitudinal position. Capacities are valid for 30 wide triple-grouser pads. Indi cated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated by *) or are limited through the allowed lift capacity of the load hook on the quick change adapter (26,455 lb). Without quick change adapter the lift capacities will increase by 551 lb, without bucket cylinder, link and lever they increase by an additional 827 lb. R 916 Litronic R 926 Litronic 25

Standard Equipment R 926 Undercarriage Lifetime-lubricated track rollers Tracks sealed and greased Three piece track guide Sprocket with dirt ejector Lashing eyes Two-stage travel motors Uppercarriage Handrails, non slip surfaces Engine hood with lift assistance Sound insulation Maintenance-free swing brake lock Maintenance-free HD-batteries Lockable tool box Tool kit Hydraulics Hydraulic tank shut-off valve and pumps Pressure test ports for hydraulic Pressure storage for controlled lowering of equipment with engine turned off Electronic pump regulation Filter with integrated fine filter area (5 µm) Stepless work mode selector Positive Control Regeneration Plus function on hydraulic circuit Electronic control logic Engine Turbo charger Conform with level IIIA / Tier 3 emission standard After-cooled Unit pump system injection Sensor controlled engine idling Dry-type air cleaner w/pre-cleaner, main and safety element Operator s Cab Storage compartment Mechanical hour meters, readable from outside the cab Sunroof, right window and windshield with safety glass Control cab Completely retractable windshield Front windshield (bottom) retractable Closed storage space Rubber floor mat Dome light Coat hook Automatic air conditioning Fuel consumption indicator Liebherr-Air-Comfort seat heated with air-suspension 7 color multifunction display with touchscreen Emergency exit rear window Preparation for radio installation Single piece right-side window (no post) Rain visor over front window opening Tinted windows Door with sliding window Height-adjustable operating console Seat belt Sun roller blind Load bearing sectional profile structure, covered with deep-drawn panels Wiper/washer Cigarette lighter and ashtray Two flood lights under rain visor Attachment Two separate pins for hoist cylinder with cast parts 26,455 lb lifting hook with safety link on quick-coupler Liebherr full-automatic central lubrication system (except connecting link for bucket kinematics) Additional work light on boom (right) Cylinders with shock absorbers Load hold valves on hoist cylinders = Standard 26 R 916 Litronic R 926 Litronic

Individual Options Undercarriage Reinforced base panel + Reinforced cover and base panel + Straight track guide + D6C conversion kit with 3-piece track guide + Uppercarriage Electric refuel pump + Reversible fan drive + Customized colors + Extended tool kit + Hydraulics Add-on kit rotary drive (including routing) + Bio-degradable hydr. oil + Grapple operation (including routing) + Liebherr proportional control system + Liebherr Tool Control + Bypass filter + Return filter for hammer + Operator s Cab Fire extinguisher + Foot support + Electric cooler + Cab with bullet-proof glass (front and roof windows) and roof window wipers + LIDAT Standard (Liebherr data transfer system) + LIDAT Plus (extended Liebherr data transfer system) + Air pressure operator seat Premium operator seat + Engine shut-down (via push-button) in cab + Bullet-proof roof glass panel with wiper + Radio with SD-/MMC-card, Aux-in + Rear view monitoring with camera + Beacon + Wiper for sunroof + Xenon headlights + Protective grid up FOPS + Protective grid front FGPS + Sun visor + Roof sun screen + Auxiliary heating with timer + Change over controls for clamshell bucket/grapple + Electronic theft protection + Additional halogen headlights behind cab + Additional halogen headlights front cab + R 926 Engine Fuel pre-heating + Liebherr particle filter + Air pre-filter with dust trap + Automatic engine shut-down (adjustable time-period) + Attachment Adjustable boom + Adjustable offset boom + Hoist cylinder depth limitation + Security for hoist cylinders + Piston rod cover bucket cylinder + 26,455 lb lifting hook on bucket + LIKUFIX + Liebherr line of buckets + Straight gooseneck boom + Safety check valves hoist cylinder + Safety check valves stick cylinder + Hose-protecting lubrication system (stick rear) + Hydr. or mechanical quick change coupler + Overload warning device + Central lubrication of the connecting link for bucket kinematics + Working headlight on boom (left) + = Standard, + = Option R 916 Litronic R 926 Litronic 27

The Liebherr Group of Companies Wide Product Range The Liebherr Group is one of the largest construction equipment manufacturers in the world. Liebherr s highvalue products and services enjoy a high reputation in many other fields, too. The wide range includes domestic appliances, aerospace and transportation systems, machine tools and maritime cranes. Exceptional Customer Benefit Every product line provides a complete range of models in many different versions. With both their technical excellence and acknowledged quality, Liebherr products offer a maximum of customer benefits in practical application. State-of-the-art Technology To provide consistent, top quality products, Liebherr attaches great importance to each product area, its components and core technologies. Important modules and components are developed and manufactured inhouse, for instance the entire drive and control technology for construction equipment and mining trucks. Worldwide and Independent Hans Liebherr founded the Liebherr family company in 1949. Since that time, the enterprise has steadily grown to a group of more than 100 companies with over 32,000 employees located on all continents. The corporate headquarters of the Group is Liebherr-International AG in Bulle, Switzerland. The Liebherr family is the sole owner of the company. www.liebherr.us Printed in Germany by Typodruck RG-BK-RP LFR/SP 11088514-2-01.11_enUS Liebherr Construction Equipment Co. 4100 Chestnut Avenue, Newport News, VA 23607, USA +1 (757) 245 5251, Fax +1 (757) 928 8701 www.liebherr.us, E-Mail: info.lce@liebherr.com