Halogen-free ables E-mail: info@sab.com Web site: www.sab.com
Item Description Page hapter Halogen-free single A A 146 FRN A A 156 FRN Halogen-free single conductor with improved fire performance and extended temperature range 00/500 V, E................. 12 Halogen-free single conductor with improved fire performance and extended temperature range 450/750 V, E................. 1 A A 166 FRN Halogen-free single conductor with improved fire performance and extended temperature range 0.6/1 kv, E................... 14 A A 147 FRN Halogen-free single conductor 600 V, UL, E.................... 15 A A 157 FRN Halogen-free single conductor 1000 V, UL, E................... 15 A A 170 TWÖ Halogen-free flexible Thin-wall single conductor - space and saving 00 V acc. to EN 5006-2, E........... 16 A A 100 HT A A 101 HT Halogen-free high temperature resistant single conductor with nickel-plated strands, E................................ 17 Halogen-free high temperature resistant single conductor with silver-plated strands, E................................ 17 Halogen-free control s 2 A A 200 FRN A A 205 FRN A A 28 FRN A A 260 PUR A A 10 HT Halogen-free control with numbered conductor, improved fire performance and extended temperature range, E.... 18 Halogen-free control with colored, improved fire performance and extended temperature range, E.... 19 Halogen-free control with numbered, overall tinned copper screen, improved fire performance and extended temperature range, E.......................... 20 Halogen-free cold-flexible, oil resistant control with numbered, E............................... 21 Halogen-free high temperature resistant control with numbered or colored, E....................... 22 Halogen-free control s with UL recognition, SA approval A 625 FRN M Halogen-free control with numbered, UL, SA, E. 2-24 A 625 S FRN M Halogen-free control with numbered and overall tinned copper screen, UL, SA, E.................. 25-26 A 625 SH FRN M Halogen-free control with numbered, inner jacket and overall tinned copper screen, UL, SA, E........ 27-28 : especially for use in rail vehicles E-mail: info@sab.com Web site: www.sab.com
Item Description Page hapter Halogen-free motor connection s 0.6/1 kv A A 810 FRN A A 812 FRN Halogen-free data s Halogen-free motor connection with numbered, improved fire performance and extended temperature range, E.... 29 Halogen-free motor connection with numbered, improved fire performance, inner jacket, overall tinned copper screen and extended temperature range, E.................... 0 A D 05 FRN A D 15 FRN A D 45 FRN TP Halogen-free flexible data with improved fire performance and extended temperature range, E.......................... 1-2 Halogen-free flexible data with improved fire performance, overall tinned copper screen and extended temperature range, E... -4 Halogen-free paired data with improved fire performance, overall tinned copper screen and extended temperature range, E... 5 Halogen-free s especially for use in rail vehicles A A 871 TWÖ A A 872 TWÖ A A 876 TWÖ TP A R 600 FRN A R 68 FRN Halogen-free Thin-wall connection and data, construction with reference to EN 5006, E.................... 6 Halogen-free Thin-wall connection and data with overall tinned copper screen, construction with reference to EN 5006, E.................... 7 Halogen-free paired Thin-wall connection and data with overall tinned copper screen, construction with reference to EN 5006, E.. 8 S Rail ontrol with numbered, tested acc. to DIN EN 45545-2, E............................ 9-40 S Rail ontrol with numbered and overall tinned copper screen, tested acc. to DIN EN 45545-2, E 41 A R 605 FRN S Rail Data, tested acc. to DIN EN 45545-2, E............ 42-4 A R 615 FRN A R 645 FRN TP A A 280 FRN X A A 285 FRN X S Rail Data with overall tinned copper screen, tested acc. to DIN EN 45545-2, E............................ 44-45 S Rail Data, paired with overall tinned copper screen, tested acc. to DIN EN 45545-2, E............................ 46 Halogen-free control with numbered, cross linked type tested acc. to DIN EN 45545-2, E.............. 47 ontrol with numbered and overall tinned copper, screen cross linked type tested acc. to DIN EN 45545-2, E........ 48 : especially for use in rail vehicles E-mail: info@sab.com Web site: www.sab.com
Item Description Page hapter L BlueLine - Halogen-free s for maritime use A BL 405 FRN Halogen-free flexible data, ABS, GL, LR, RINA, E........... 49 A BL 415 FRN Halogen-free flexible data with overall tinned copper screen, ABS, GL, LR, RINA, E.......... 50 A BL 445 FRN TP Halogen-free paired data with overall tinned copper screen, ABS, GL, LR, RINA, E.......... 51 A BL 400 FRN Halogen-free flexible control 00/500 V, ABS, GL, LR, RINA, E 52 A BL 48 FRN Halogen-free flexible control with overall tinned copper screen 00/500 V, ABS, GL, LR, RINA, E. 5 A BL 410 FRN Halogen-free flexible power 0,6/1 kv, ABS, GL, LR, RINA, E.. 54 A BL 412 FRN Halogen-free flexible power with overall tinned copper screen 0,6/1 kv, ABS, GL, LR, RINA, E... 55 4 L Ultra - ontinuous flex with higher fire protection A SD 705 ontinuous flex data with FRN 1 extended temperature range and higher fire protection, E...... 56 A S 710 ontinuous flex control with FRN 1 extended temperature range and higher fire protection, E...... 57 A SD 715 ontinuous flex shielded data with FRN 1 extended temperature range and higher fire protection, E...... 58 A S 712 ontinuous flex shielded control with FRN 1 extended temperature range and higher fire protection, E...... 59 A SD 745 ontinuous flex shielded twisted pairs data with FRN 1 TP extended temperature range and higher fire protection, E...... 60 : especially for use in shipbuilding industry NEW NEW NEW NEW NEW E-mail: info@sab.com Web site: www.sab.com
HALOGEN-FREE ABLES Applications n Application of single and wiring s These single are installed in applications where high flex s are required. The various versions of these s offer excellent characteristics such as oil resistance, low temperature flexibility, heat resistance, hot-air resistance, weather resistance and are. Exemplary applications: A 146 FRN A 156 FRN A 170 TWÖ A 166 FRN A 147 FRN A 157 FRN A 100 HT A 101 HT Production of control cabinets, appliances and devices for communication technologies, household appliances, construction of generators and transformers, machine construction, railway technologies: furthermore, the FRN type is particularly suitable for internal wiring of rail vehicles Internal wiring at high ambient temperatures in protected rooms n Application of control and connection s These s are particularly suitable for control panels at tool working machines, assembly lines, transporting systems, production lines, rail technologies etc. Once installed these s can be moved easily for installation and adjustment as well as inspection of machines. Note: ables can not be mechanically overloaded during the movement. If a certain protection against electromagnetic interferences is requested, s with an overall tinned copper screen should be used. The excellent characteristics of X s, in various versions are oil resistance, low temperature flexibility, heat resistance, hot-air resistance, weather resistance, and are also. Exemplary applications: A 200 FRN A 205 FRN A 28 FRN A 260 PUR A 10 HT A 810 FRN A 812 FRN 625 FRN M 625 S FRN M 625 SH FRN M Automation systems, car manufacturing industry, machine construction, railway technologies Transporting systems, construction of industrial plants, automation technologies Automation technologies, steel and iron industries, car manufacturing industry, machine construction, refrigeration and climate technologies, car wash, rising platforms for trucks Plastics processing, packaging machine construction, smelters, steelworks and hot rolling mills, safety engineering, processing of cement, glass and ceramics, sauna construction, heat, refrigeration and climate technologies Automation technologies, car manufacturing industry, machine construction, power supply between frequency converter and servo motor Automation technologies, car manufacturing industry, machine construction, railway technologies Transporting systems, construction of industrial plants, automation technologies 5 E-mail: info@sab.com Web site: www.sab.com
HALOGEN-FREE ABLES Applications n Application of data s Data s are used for the transmission of signals, measuring values and control signals in electronic control appliances, data processing systems, railway technologies, weighing installations, office appliances or wherever small cross sections, bending radii, shielding or high flexibility is demanded. The excellent characteristics of these s, in various versions are oil resistance, low temperature flexibility, heat resistance, weather resistance, flexibility and being. Exemplary applications: D 05 FRN D 15 FRN D 45 FRN TP A 871 TWÖ A 872 TWÖ A 876 TWÖ TP ommunication technologies Electronic data processing systems, weighing installations, office appliances Electronic data processing systems, weighing installations, office appliances, for increased requirements on transmission characteristics and near-end cross talk attenuation ables for internal wiring of rail vehicles acc. to EN 5006, data transmission, information systems n Application of Rail Data and Rail ontrol tested acc. to DIN EN 45545-2 In sensitive areas, such as in public buildings and facilities and rail vehicles, the requirements for the protection of the general security are very high. In addition, s must be flame-retardant and self extinguishing and must not contribute to fire propagation. All of these characteristics, can be found in our brand name of X. Our X Rail ables meet the highest safety standards according to DIN EN 45545-2, and are certified by the Fire Technology Laboratory urrenta GmbH. Exemplary applications: R 600 FRN ables for internal wiring of rail vehicles acc. to DIN EN 45545-2 R 68 FRN R 605 FRN R 615 FRN R 645 FRN TP A 280 FRN X A 285 FRN X 6 n Application of BlueLine data, control and power s for shipbuilding The development of the new BlueLine series has been achieved with co-operation from our customers coming from the shipbuilding field. The new s are available as X BlueLine s. All X BlueLine types are constructed with tinned copper strands in class 5 in order to offer advantages in corrosion resistance and flexibility. The halogenfree X BlueLine s have been approved by GL, LR as well as ABS. Their X characteristics fulfill the highest safety-related aspects in shipbuilding with regards to both fire performance as well as being. Data s, type X BlueLine Data, are available with small cross sections beginning with 26 AWG. This results in a small outer diameter which offers an outstanding advantage particularly where there is only a little space. The types X BlueLine ontrol as well as X BlueLine Power complement the new product series with control and power supply s for electrical components. Exemplary applications: BL 405 FRN BL 415 FRN BL 445 FRN TP BL 400 FRN BL 48 FRN BL 410 FRN BL 412 FRN Installation and wiring of navigation and bridge electronics as BNWAS, power supply of electrical components E-mail: info@sab.com Web site: www.sab.com
HALOGEN-FREE ABLES Applications n Application of - continuous flex with higher fire protection Fire protection,, flexibility and oil resistance are the characteristics united by our new product range X Ultra. Due to the new jacket material, the can be used for flexible applications and shows the highest fire protection features by the standards EN 602-1-2, EN 602- at or D, IE 60754-1, IE 60754-2, EN 6104, NF 2-070 1, NF X 70-100. Exemplary applications: SD 705 FRN 1 as festoon for polar cranes in nuclear power plants, in rail technology SD 715 FRN 1 as sensor at the vehicle chassis, SD 745 FRN 1 TP chain applications with moderate mechanical stress S 710 FRN 1 S 712 FRN 1 as festoon for polar cranes in nuclear power plants, in rail technology as sensor at the vehicle chassis or as flexible control at the train doors, chain applications with moderate mechanical stress s can be fully recycled and in separate components newly supplied to the resource cycle. ables with FRN outer jacket avoid flame propagation in case of local flaming and are flame retardant and self-extinguishing acc. to VDE, EN and IE. They fulfil the smoke density acc. to IE, EN, VDE and BS. 7 E-mail: info@sab.com Web site: www.sab.com
HALOGEN-FREE ABLES Selection index Basic construction static* Voltage Standards able type A A 146 FRN A A 156 FRN A A 166 FRN A A 147 FRN A A 157 FRN A A 170 TWÖ A A 100 HT A A 101 HT A A 200 FRN A A 205 FRN A A 28 RN A A 260 PUR A A 10 HT 8 Special features Single x x x x x x x x Numbered conductrors x x x x olored conductrors x x Screened Inner jacket Twisted pairs + 220 + 105 + 90 + 85 0 40 50 Nominal voltage 600 V (UL) Nominal voltage 1000 V (UL) Nominal voltage Uo 00 V Nominal voltage Uo/U 00/500 V x x x x x x x x x Nominal voltage Uo/U 450/750 V x x Nominal voltage Uo/U 0,6/1 kv Data peak operating voltage max. 50 V or max. 500 V Testing voltage 800 V or 1200 V x Testing voltage 2000 V x x x x Testing voltage 2500 V x Testing voltage 000 V x x x x x Testing voltage 4000 V Burning characteristics: flame retardant and self-extinguishing acc. to x x x x x x x x x x x IE 602-1-2 and EN 602-1-2 No flame propagation acc. to x x x x x x x x IE 602 and EN 602 cat. resp. D Fire protection class 1-4 acc. to DIN 5510 part 1 Smoke density acc. to IE 6104 + x x x x x x x x EN 6104 UL acc. to AWM Style Thin-wall/small outer diameter Very good oil resistance acc. to DINVDE Oil resistant acc. to EN 5006 Good chemical resistance Ozone resistant acc. to VDE 0282 part 2 Flexibility x x x x x x x x x x x x Weather resistance x x x x x x x x x Valid for all herein mentioned s: acc. to DINVDE 0472 part 815 and IE 60754-1 orrosiveness of conflagration gases acc. to IE 60754-2 + EN 50267-2-2 + VDE 0482 part 267-2-2 - x x x x x x x x x : from *The temperature range for flexing is mentioned on the particular catalog page to E-mail: info@sab.com Web site: www.sab.com
HALOGEN-FREE ABLES Selection index Basic construction static* Voltage Standards able type A 625 FRN M A 625 S FRN M A 625 SH FRN M A A 810 FRN A A 812 FRN A D 05 FRN A D 15 FRN A D 45 FRN TP A A 871 TWÖ A A 872 TWÖ A A 876 TWÖ TP Special features Single Numbered conductrors x x x x x x x x olored conductrors x x x Screened x x x x x x x Inner jacket x x Twisted pairs x x + 220 + 105 + 90 + 85 0 40 50 Nominal voltage 600 V (UL) x x x Nominal voltage 1000 V (UL) Nominal voltage Uo 00 V Nominal voltage Uo/U 00/500 V x x x x x x Nominal voltage Uo/U 450/750 V Nominal voltage Uo/U 0,6/1 kv x x Data peak operating voltage x x x max. 50 V or max. 500 V Testing voltage 800 V or 1200 V x x x Testing voltage 2000 V x x x Testing voltage 2500 V Testing voltage 000 V x x x Testing voltage 4000 V x x Burning characteristics: flame retardant and self-extinguishing acc. to x x x x x x x x x x x IE 602-1-2 and EN 602-1-2 No flame propagation acc. to x x x x x x x x x x x IE 602 and EN 602 cat. resp. D Fire protection class 1-4 acc. x x x to DIN 5510 part 1 Smoke density acc. to IE 6104 + x x x x x x x x x x x EN 6104 UL acc. to AWM Style x x x Thin-wall/small outer diameter x x x Very good oil resistance acc. to DINVDE Oil resistant acc. to EN 5006 x x x Good chemical resistance Ozone resistant acc. to VDE 0282 part 2 x x x Flexibility x x x x x x x x x x x Weather resistance x x Valid for all herein mentioned s: acc. to DINVDE 0472 part 815 and IE 60754-1 orrosiveness of conflagration gases acc. to IE 60754-2 + EN 50267-2-2 + VDE 0482 part 267-2-2-9 : from *The temperature range for flexing is mentioned on the particular catalog page to E-mail: info@sab.com Web site: www.sab.com
HALOGEN-FREE ABLES Selection index ables for railway technology ables for shipbuilding able type Applications Standards Temperature range fixed laying* Voltage Halogen-free Burning characteristics A R 600 FRN A R 68 FRN A R 605 FRN A R 615 FRN A R 645 FRN TP A A 280 FRN X A A 285 FRN X able type A BL 405 FRN A BL 415 FRN A BL 445 FRN TP A BL 400 FRN A BL 48 FRN A BL 410 FRN A BL 412 FRN 10 Wiring Data x x x ontrol x x x x Screened x x x x ross linked type x x Tested acc. to DIN EN 45545-2 x x x x x x x acc. to EN 5006-1 + EN 50264-1 are fulfilled. Development of Hl is < 0,5% acc. to DIN EN 50267-2-1. ph-value is > 4, acc. to DIN EN 50267-2-2. x x x x x x x onductivity is < 10,0 µs/mm acc. to DIN EN 50267-2-2. Fluoric content < 0,1% acc. to DIN EN 60684-2. No flame propagation x x x x x x x acc. to DIN EN 602--24 No flame propagation acc. to DIN EN 602--25 resp. x x x x x x x DIN EN 5005 section 9.1.1 No flame propagation acc. to DIN EN 5005 x x x x x x x section 9.1.2 Flame retardant and self-extinguishing x x x x x x x acc. to DIN EN 602-1-2 Flame retardant acc. to x x x ISO 6722 (UN/EE R118) Burning tests x x acc. to ASTM E 162-09 Toxicity acc. to DIN EN 5005 x x x x x x x Smoke density x x x x x x x acc. to DIN EN 6104 Smoke density x x acc. to ASTM E 662-09 harmful substances acc. to RoHS x x x x x x x directive of the European Union + 125 + 90 + 40 50 Nominal voltage Uo/U 00/500 V x x x x Peak operating voltage: < 24 AWG = max. 50 V x x x 24 AWG = max. 500 V x onstruction Temperature range fixed laying* Voltage range Standards Type approvals haracteristics : from to Data x x x ontrol x x Power x x Screened x x x x + 90 40 Peak operating voltage max. 50 V x x x Nominal voltage Uo/U 00/500 V x x Nominal voltage Uo/U 600/1000 V x x Halogen-free acc. to IE 60754-1 + EN 602-1-2 x x x x x x x Flame retardant and self-extinguishing acc. to IE 602-1-2 x x x x x x x + EN 602-1-2 No flame propagation acc. to IE 602 --22 + x x x x x x x DIN EN 602--22 Smoke density acc. to IE 6104 + EN 6104 x x x x x x x orrosiveness of conflagration gases IE 60754-2 + x x x x x x x DIN EN 50267-2-2 Germanischer Lloyd x x x x x x x Lloyd s Register x x x x x x x American Bureau of Shipping x x x x x x x Registro Italiano Navale x x x x x x x Flexible conductor stranding x x x x x x x Extended cross section range x x x *The temperature range for flexing is mentioned on the particular catalog page E-mail: info@sab.com Web site: www.sab.com
HALOGEN-FREE ABLES Selection index L Ultra - continuous flex with higher fire protection able type A SD 705 FRN 1 A S 710 FRN 1 A SD 715 FRN 1 A S 712 FRN 1 Application A SD 745 FRN 1 TP Temperature range static* Voltage haracteristics, standards and approvals Data s x x x ontrol s x x Screened x x x Twisted pairs x + 90 50 Peak operating voltage < 0,25 mm 2 = max. 50 V x x x 0,25 mm 2 = max. 500 V Nominal voltage 0,6/1 kv x x Halogen-free acc. to DIN VDE 0472 part 815 x x x x x + IE 60754-1 No flame propagation acc. to IE 602 + x x x x x EN 602 at or D Flame retardant and self-extinguishing acc. to IE 602-1-2 + EN 602-1-2 x x x x x + NF 2-070 1 orrosiveness of conflagration gases acc. to IE 60754-2 + EN 50267-2-2 x x x x x + VDE 0482 part 267-2-2 Smoke density acc. to IE 6104 + EN 6104 x x x x x Toxicity acc. to NF X 70-100 x x x x x Oil and fuel resistance acc. to EN 50264-1 x x x x x These pages are meant to be helpful for choosing s, they do not contain any guaranteed characteristics. Please also see the technical data on the particular catalog pages. 11 : from to *The temperature range for flexing is mentioned on the particular catalog page E-mail: info@sab.com Web site: www.sab.com
On request with tinned copper strands HALOGEN-FREE ABLES A 146 FRN Wiring with improved fire performance and extended temperature range 00/500 V S BRÖSES D-VIERSEN XA146 FRN 00/500 V 0.5 mm2 Marking for XA 146 FRN 61460150: A BRÖSES D-VIERSEN XA146 FRN 00/500 V 0.5 mm 2 A A 146 FRN is a single conductor for use in control cabinets, appliances and communication technologies, household appliances, generators and transformers, machine construction, railway technologies and other specific technologies. This is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire. onductor: olor code: bare copper strands acc. to IE 60228, EN 60228, VDE 0295, class 5 A colored very good stripping flexible Nominal voltage: Uo/U 00/500 V Testing voltage: 2000 V : 7.5 x O.D. For one single bend: 0,5 x O.D. fixed installation: -40/+90 flexing: -0/+90 Zero halogen: acc. to DIN VDE 0472 part 815 and IE 60754-1 Burning characteristics: acc. to IE 602 + EN 602 cat. resp. D. Flame retardant and self-extinguishing acc. to IE 602-1-2 and EN 602-1-2 orrosivity: in compliance with IE 60754-2 and EN 50267-2-2 + VDE 0482 part 267-2-2 - Smoke density: acc. to IE 6104 + EN 6104 good Weather resistance: good mm 2 AWG 6146.. 50* 0.50 20 ( 16/2) 0.08 2.1 6146.. 75* 0.75 19 ( 2/2) 0.094 2.4 6146.. 80* 1.00 18 ( 0/2) 0.098 2.5 6 8 9 12 * olor code for single : 01 = black 06 = green 02 = blue 07 = violet 0 = brown 08 = white 04 = gray 16 = gentian blue 05 = yellow 27 = green-yellow E-mail: info@sab.com Web site: www.sab.com
HALOGEN-FREE ABLES A 156 FRN Wiring with improved fire performance and extended temperature range 450/750 V On request with tinned copper strands SBRÖSES D-VIERSEN XA156 FRN 450/750 V 1.5 m Marking for XA 156 FRN 61560182: A BRÖSES D-VIERSEN XA156 FRN 450/750 V 1.5 mm 2 A A 156 FRN is a single conductor for use in control cabinets, appliances and communication technologies, household appliances, generators and transformers, machine construction, railway technologies and other specific technologies. This is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire. onductor: olor code: bare copper strands acc. to IE 60228, EN 60228, VDE 0295, class 5 A colored very good stripping flexible Nominal voltage: Uo/U 450/750 V Testing voltage: 2500 V : 7.5 x O.D. For one single bend: 0,5 x O.D. fixed installation: -40/+90 flexing: -0/+90 Zero halogen: acc. to DIN VDE 0472 part 815 and IE 60754-1 Burning characteristics: acc. to IE 602 + EN 602 cat. resp. D. acc. to IE 602-1-2 and EN 602-1-2 orrosivity: in compliance with IE 60754-2 and EN 50267-2-2 + VDE 0482 part 267-2-2 - Smoke density: acc. to IE 6104 + EN 6104 good Weather resistance: good mm 2 AWG MM 6156.. 82* 1.50 16 ( 27-29/0) 0.118.0 1 6156.. 84* 2.50 14 ( 46/0) 0.142.6 22 6156.. 86* 4.00 12 ( 52/28) 0.165 4.2 2 6156.. 87* 6.00 10 ( 78/28) 0.185 4.7 45 6156.. 88* 10.00 8 ( 77/26) 0.248 6. 79 6156.. 89* 16.00 6 ( 122/26) 0.15 8.0 122 6156.. 90* 25.00 4 ( 190/26) 0.90 9.9 196 6156.. 91* 5.00 2 ( 272/26) 0.47 11.1 265 6156.. 92* 50.00 1 ( 400/26) 0.496 12.6 78 6156.. 9* 70.00 2/0 ( 54/26) 0.58 14.8 505 6156.. 94* 95.00 /0 ( 484/24) 0.717 18.2 695 6156.. 95* 120.00 4/0 ( 589/24) 0.776 19.7 84 6156.. 96* 150.00 250 ( 740/24) 0.858 21.8 108 6156.. 97* 185.00 50 ( 902/24) 0.91 2.2 1254 6156.. 98* 240.00 450 ( 1220/24) 1.059 26.9 1685 6156.. 99* 00.00 550 ( 1525/24) 1.181 0.0 2100 1 * olor code for single : 01 = black 06 = green 02 = blue 07 = violet 0 = brown 08 = white 04 = gray 16 = gentian blue 05 = yellow 27 = green-yellow E-mail: info@sab.com Web site: www.sab.com
On request with tinned copper strands HALOGEN-FREE ABLES Wiring with improved fire performance A 166 FRN and extended temperature range 0.6/1 kv S BRÖSES D-VIERSEN XA166 FRN 0.6/1 kv 1.5 mm2 Marking for XA 166 FRN 61660182: A BRÖSES D-VIERSEN XA166 FRN 0.6/1 kv 1.5 mm 2 A A 166 FRN is a single conductor for use in control cabinets, appliances and communication technologies, household appliances, generators and transformers, machine construction, railway technologies and other specific technologies. This is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire. onductor: olor code: bare copper strands acc. to IE 60228, EN 60228, VDE 0295, class 5 A colored very good stripping flexible Nominal voltage: Uo/U 0.6/1 kv Testing voltage: 000 V : 7.5 x O.D. For one single bend: 7,5 x O.D. fixed installation: -40/+90 flexing: -0/+90 Zero halogen: acc. to DIN VDE 0472 part 815 and IE 60754-1 Burning characteristics: acc. to IE 602 + EN 602 cat. resp. D. Flame retardant and self-extinguishing acc. to IE 602-1-2 and EN 602-1-2 orrosivity: in compliance with IE 60754-2 and EN 50267-2-2 + VDE 0482 part 267-2-2 - Smoke density: acc. to IE 6104 + EN 6104 good Weather resistance: good mm 2 AWG MM mm 2 AWG MM 14 6166.. 82* 1.50 16 ( 27-29/0) 0.126.2 6166.. 84* 2.50 14 ( 46/0) 0.154.9 6166.. 86* 4.00 12 ( 52/28) 0.177 4.5 6166.. 87* 6.00 10 ( 78/28) 0.197 5.0 6166.. 88* 10.00 8 ( 77/26) 0.287 7. 6166.. 89* 16.00 6 ( 122/26) 0.27 8. 6166.. 90* 25.00 4 ( 190/26) 0.402 10.2 6166.. 91* 5.00 2 ( 272/26) 0.449 11.4 15 24 4 48 88 14 205 271 6166.. 92* 50.00 1 ( 400/26) 0.555 14.1 87 6166.. 9* 70.00 2/0 ( 54/26) 0.594 15.1 514 6166.. 94* 95.00 /0 ( 484/24) 0.728 18.5 707 6166.. 95* 120.00 4/0 ( 589/24) 0.787 20.0 847 6166.. 96* 150.00 250 ( 740/24) 0.870 22.1 105 6166.. 97* 185.00 50 ( 902/24) 0.925 2.5 1271 6166.. 98* 240.00 450 ( 1220/24) 1.071 27.2 1706 * olor code for single : 01 = black 06 = green 02 = blue 07 = violet 0 = brown 08 = white 04 = gray 16 = gentian blue 05 = yellow 27 = green-yellow E-mail: info@sab.com Web site: www.sab.com
HALOGEN-FREE ABLES A 147 FRN Wiring 600 V A 157 FRN Wiring 1000V 00/500V 0.5 mm 2 20 AWG U AWM Style 10528 75 600V E172204 Marking for XA 147 FRN 61470150: A BRÖSES D-VIERSEN XA 147 FRN 00/500V 0.5 mm 2 20 AWG U AWM Style 10528 75 600V E172204 A A 147 FRN / A A 157 FRN is a, UL recognized single conductor for use in control cabinets, appliances and communication technologies, household appliances, generators and transformers, machine construction, railway technologies and other specific technologies. This is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire. onductor: olor code: tinned copper strands acc. to IE 60228, EN 60228, VDE 0295, class 5 A colored UL recognition Voltage UL: A147 FRN: A157 FRN: 20-18 AWG: 16 AWG - 550 MM: 600 V 1000 V Nominal voltage Uo/U: A147 FRN: A157 FRN: 20-18 AWG: 16 AWG - 550 MM: 00/500 V 450/750 V : 7.5 x O.D. For one single bend: 0,5 x O.D. DIN VDE: UL: up to +75 fixed installation: -40/+90 flexing: -0/+90 Zero halogen: acc. to DIN VDE 0472 part 815 and IE 60754-1 Burning characteristics: acc. to IE 602 + EN 602 cat. resp. D. Flame retardant and self-extinguishing acc. to IE 602-1-2 and EN 602-1-2 orrosivity: in compliance with IE 60754-2 and EN 50267-2-2 + VDE 0482 part 267-2-2 - Smoke density: acc. to IE 6104 + EN 6104 good Weather resistance: good A 147 FRN mm 2 AWG MM 6147.. 50* 0.50 20 ( 16/2) 0.08 2.1 6 6147.. 75* 0.75 19 ( 2/2) 0.094 2.4 8 6147.. 80* 1.00 18 ( 0/2) 0.098 2.5 10 * olor code for single : 01 = black 06 = green 02 = blue 07 = violet 0 = brown 08 = white 04 = gray 16 = gentian blue 05 = yellow 27 = green-yellow A 157 FRN mm 2 AWG MM 6157.. 82* 1.50 16 ( 27-29/0) 0.118.0 1 6157.. 84* 2.50 14 ( 46/0) 0.142.6 22 6157.. 86* 4.00 12 ( 52/28) 0.165 4.2 2 6157.. 87* 6.00 10 ( 78/28) 0.185 4.7 45 6157.. 88* 10.00 8 ( 77/26) 0.248 6. 79 6157.. 89* 16.00 6 ( 122/26) 0.15 8.0 122 6157.. 90* 25.00 4 ( 190/26) 0.90 9.9 196 6157.. 91* 5.00 2 ( 272/26) 0.47 11.1 265 6157.. 92* 50.00 1 ( 400/26) 0.54 1.8 78 6157.. 9* 70.00 2/0 ( 54/26) 0.58 14.8 505 6157.. 94* 95.00 /0 ( 484/24) 0.717 18.2 695 6157.. 95* 120.00 4/0 ( 589/24) 0.776 19.7 84 6157.. 96* 150.00 250 MM ( 740/24) 0.858 21.8 108 6157.. 97* 185.00 50 MM ( 902/24) 0.91 2.2 1254 6157.. 98* 240.00 450 MM ( 1220/24) 1.059 26.9 1685 6157.. 99* 00.00 550 MM ( 1525/24) 1.181 0.0 2100 15 E-mail: info@sab.com Web site: www.sab.com
Safety by standardized and controlled production HALOGEN-FREE ABLES A 170 TWÖ Flexible Thin-wall single conductor - space and saving ÖSES D-VIERSEN XA170 TWÖ EN 5006-2 00 V 1 x 0.5 mm 2 16 Marking for XA 170 TWÖ 68700105: A BRÖSES D-VIERSEN XA 170 TWÖ EN 5006-2 00 V 1 x 0.5 mm 2 A A 170 TWÖ is a single conductor for use in control cabinets, appliances and communication technologies, household appliances, generators and transformers, machine construction, railway technologies and other specific technologies. This is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire. onductor: olor code: tinned copper strands, fine wires acc. to EN 5006-2 white flame retardant low smoke emission smallest outer-diameter space-saving installation light abrasion resistant surface standardized safety accomplishes the fire protection levels 1-4 acc. to DIN 5510 AWG min. nominal outer-ø max. nominal outer-ø ohmicresistance at 20 max. W/km 68700105 20/1c 0.045 1.15 0.057 1.45 4 40.10 68700107 19/1c 0.05 1.5 0.065 1.65 5 26.70 68700110 18/1c 0.057 1.45 0.071 1.80 7 20.00 68700115 16/1c 0.077 1.95 0.091 2.0 10 1.70 68700125 14/1c 0.098 2.50 0.112 2.85 16 8.21 Especially for use in rail vehicles Nominal voltage Uo: 00 V Testing voltage: 4 kv : +105, with short circuit of 5 sec., +160 Test EN 5006-2 Requirements B results Voltage test 2000 Va.c., 5 min. passed 4800 Vd.c., 5 min. Dielectric 4000 V a.c. passed strength D..-voltage strength 00 Vd.c., 10 d / 85 passed current increase < 10% Insulation resistance 0.5 mm 2-600 MW*km passed at 20 Insulation resistance 0.5 mm 2-0. MW*km passed at 90 Stripping easy passed of insulation Oil resistance no tears passed IRM 902 at 100 / 24h voltage test at 1.5 kv a.c. Fuel resistance no tears passed IRM 90 at 70 / 168h voltage test at 1.5 kv a.c. Resistance against acids no tears passed N-oxalic acid solution voltage test at 2 /168h at 1.5 kv a.c. Alkaline resistance no tears passed N-oxalic acid solution voltage test at 2 /168h at 1.5 kv a.c. Hot pressure resistance impression depth < 50%, impression depth 0% at 125 /4h voltage test passed at 1.5 kv a.c. Dynamic penetration test 0.5 mm 2 - load 70 N passed Resistance at -15 / h passed to tear propagation at +2 / h at +85 / h voltage test at 150 V a.c. Shrinking at 150 < 1.5 mm passed Blocking of at 150 / 6h passed no adhesion old at -40 passed bend test Abrasion resistance 0.5 mm 2 - load 7 N passed Elasticity passed Ozone resistance method B passed no tears voltage test at 1.5 kv a.c. Stress cracking 168 h at 180 passed resistance no tears voltage test at 1.5 kv a.c. Flame propagation flame effect 60 sec. passed at conductor fire trace: < 425 mm fire trace: 70 mm no afterflame period Flame propagation flame effect 20 min passed bundeled fire trace: < 1.5 m fire trace: 0,8 m no afterflame period Acidity ph min. 4, passed of corrosive gases conductivity max. 10.0 µs/mm Development hydrogen chloride max. 0.5%, passed of corrosive gases fluorine max. 0.1% Smoke density category 4 > 70% light transmission Ž 80% EN 5006-2 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 E-mail: info@sab.com Web site: www.sab.com
temperature resistant up to + 220 HALOGEN-FREE ABLES A 100 HT with nickel-plated strands A 101 HT with silver-plated strands S High temperature resistant single conductor High temperature resistant single conductor BRÖSES D-VIERSEN XA100 HT 220 Marking for XA 100 HT 71000150: A BRÖSES D-VIERSEN XA100 HT 220 A A 100 HT / A A 101 HT are single conductor s. These s are especially made for use for internal wiring at high ambient temperatures in protected rooms. With the insulation, these s are useful for temperatures up to 220. onductor: olor code: A 100 HT: nickel-plated copper strands A 101 HT: silver-plated copper strands fine wires acc. to IE 60228, EN 60228, VDE 0295, class 5 A colored high temperature resistant flexible A 101 HT: good solderability Nominal voltage: Testing voltage: : For one single bend: fixed installation: flexing: Uo/U 00/500 V 2000 V 7.5 x O.D. 0,5 x O.D. -40/+220-25/+220 Zero halogen: acc. to DIN VDE 0472 part 815 and IE 60754-1 Burning characteristics: acc. to IE 602-1-2 and EN 602-1-2 orrosivity: in compliance with IE 60754-2 and EN 50267-2-2 + VDE 0482 part 267-2-2 - A 100 HT mm 2 AWG MM 7100.. 25* 0.25 24 ( 14/4) 0.091 2. 5 7100.. 4* 0.4 22 ( 7/0) 0.094 2.4 5 7100.. 50* 0.50 20 ( 16/2) 0.098 2.5 7 7100.. 75* 0.75 19 ( 2/2) 0.110 2.8 9 7100.. 80* 1.00 18 ( 0/2) 0.114 2.9 10 7100.. 82* 1.50 16 ( 27-29/0) 0.14.4 14 7100.. 84* 2.50 14 ( 46/0) 0.157 4.0 22 7100.. 86* 4.00 12 ( 52/28) 0.181 4.6 2 7100.. 87* 6.00 10 ( 78/28) 0.201 5.1 45 7100.. 88* 10.0 8 ( 77/26) 0.291 7.4 81 7100.. 89* 16.0 6 ( 122/26) 0.1 8.4 118 7100.. 90* 25.0 4 ( 190/26) 0.406 10. 190 7100.. 91* 5.0 2 ( 272/26) 0.45 11.5 259 7100.. 92* 50.0 1 ( 400/26) 0.559 14.2 69 7100.. 9* 70.0 2/0 ( 54/26) 0.598 15.2 495 7100.. 94* 95.0 /0 ( 484/24) 0.72 18.6 678 7100.. 95* 120.0 4/0 ( 589/24) 0.791 20.1 816 7100.. 96* 150.0 250 ( 740/24) 0.874 22.2 1015 7100.. 97* 185.0 50 ( 902/24) 0.929 2.6 1228 7100.. 98* 240.0 450 ( 1220/24) 1.075 27. 1651 7100.. 99* 00.0 550 ( 1525/24) 1.197 0.4 2058 A 101 HT mm 2 AWG MM 7101.. 25* 0.25 24 ( 14/4) 0.091 2. 5 7101.. 4* 0.4 22 ( 7/0) 0.094 2.4 5 7101.. 50* 0.50 20 ( 16/2) 0.098 2.5 7 7101.. 75* 0.75 19 ( 2/2) 0.110 2.8 9 7101.. 80* 1.00 18 ( 0/2) 0.114 2.9 10 7101.. 82* 1.50 16 ( 27-29/0) 0.14.4 14 7101.. 84* 2.50 14 ( 46/0) 0.157 4.0 22 7101.. 86* 4.00 12 ( 52/28) 0.181 4.6 2 7101.. 87* 6.00 10 ( 78/28) 0.201 5.1 45 7101.. 88* 10.0 8 ( 77/26) 0.291 7.4 81 7101.. 89* 16.0 6 ( 122/26) 0.1 8.4 118 7101.. 90* 25.0 4 ( 190/26) 0.406 10. 190 7101.. 91* 5.0 2 ( 272/26) 0.45 11.5 259 7101.. 92* 50.0 1 ( 400/26) 0.559 14.2 69 7101.. 9* 70.0 2/0 ( 54/26) 0.598 15.2 495 7101.. 94* 95.0 /0 ( 484/24) 0.72 18.6 678 7101.. 95* 120.0 4/0 ( 589/24) 0.791 20.1 816 7101.. 96* 150.0 250 ( 740/24) 0.874 22.2 1015 7101.. 97* 185.0 50 ( 902/24) 0.929 2.6 1228 7101.. 98* 240.0 450 ( 1220/24) 1.075 27. 1651 7101.. 99* 00.0 550 ( 1525/24) 1.197 0.4 2058 17 * olor code for single : 01 = black 06 = green 02 = blue 07 = violet 0 = brown 08 = white 04 = gray 16 = gentian blue 05 = yellow 27 = green-yellow E-mail: info@sab.com Web site: www.sab.com
HALOGEN-FREE ABLES A 200 FRN ontrol with numbered, improved fire performance and extended temperature range ÖSES D-VIERSEN XA200 FRN 12 G 1.5 mm 2 Marking for XA 200 FRN 62001215: A BRÖSES D-VIERSEN XA200 FRN 12 G 1.5 mm 2 A A 200 FRN is a, multi-conductor, flexible power and control designed for use in all electrical equipment in dry, damp and wet conditions. Recommended applications include machinery, data processing equipment, ventilation and air conditioning systems. In case of fire, no corrosive gases are produced. This is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire. onductor: olor code: bare copper strands acc. to IE 60228, EN 60228, VDE 0295, class 5 A black with consecutive numbers acc. to EN 504; green-yellow earth wire from A gray very flexible very good stripping Nominal voltage: Uo/U 00/500 V Testing voltage U: 000 V acc. to DIN VDE 0281 part 2 + HD 21.2 fixed installation: 4 x O.D. free movement: 6 x O.D. static: -40/+85 flexing: -0/+85 Zero halogen: acc. to DIN VDE 0472 part 815 and IE 60754-1 Burning characteristics: acc. to IE 602 + EN 602 cat. resp. D. Flame retardant and self-extinguishing acc. to IE 602-1-2 and EN 602-1-2 orrosivity: in compliance with IE 60754-2 and EN 50267-2-2 + VDE 0482 part 267-2-2 - Smoke density: acc. to IE 6104 + EN 6104 good Weather resistance: good 18 20 AWG ( 16/2) 0.50 mm 2 62000205 2 0.197 5.0 6200005 0.209 5. 62000405 4 0.224 5.7 62000505 5 0.252 6.4 62000705 7 0.272 6.9 62001005 10 0.46 8.8 62001205 12 0.66 9. 62001805 18 0.429 10.9 62002505 25 0.516 1.1 6200205 2 0.559 14.2 62004205 42 0.626 15.9 62006105 61 0.76 18.7 19 AWG ( 2/2) 0.75 mm 2 62000207 2 0.220 5.6 6200007 0.22 5.9 62000407 4 0.260 6.6 62000507 5 0.28 7.2 62000707 7 0.15 8.0 62001007 10 0.402 10.2 62001207 12 0.421 10.7 62001807 18 0.496 12.6 62002507 25 0.602 15. 6200207 2 0.654 16.6 62004207 42 0.72 18.6 62006107 61 0.858 21.8 18 AWG ( 0/2) 1.00 mm 2 62000210 2 0.228 5.8 6200010 0.248 6. 62000410 4 0.268 6.8 25 29 4 42 52 7 85 121 161 200 255 56 2 8 47 56 71 101 117 167 228 282 60 504 6 45 54 18 AWG ( 0/2) 1.00 mm 2 62000510 5 0.0 7.7 62000710 7 0.27 8. 62001010 10 0.425 10.8 62001210 12 0.47 11.1 62001810 18 0.516 1.1 62002510 25 0.626 15.9 6200210 2 0.681 17. 62004210 42 0.772 19.6 62006110 61 0.902 22.9 16 AWG ( 27-29/0) 1.50 mm 2 62000215 2 0.260 6.6 6200015 0.276 7.0 62000415 4 0.07 7.8 62000515 5 0.5 8.5 62000715 7 0.70 9.4 62001015 10 0.480 12.2 62001215 12 0.496 12.6 62001815 18 0.591 15.0 62002515 25 0.717 18.2 6200215 2 0.776 19.7 62004215 42 0.874 22.2 62006115 61 1.024 26.0 14 AWG ( 46/0) 2.50 mm 2 62000225 2 0.15 8.0 6200025 0.5 8.5 62000425 4 0.70 9.4 62000525 5 0.406 10. 62000725 7 0.449 11.4 62001025 10 0.591 15.0 67 8 120 16 196 267 1 420 595 48 58 7 87 112 161 18 267 69 458 59 8 7 88 110 12 171 251 14 AWG ( 46/0) 2.50 mm 2 62001225 12 0.610 15.5 287 62001825 18 0.724 18.4 416 62002525 25 0.886 22.5 568 12 AWG ( 52/28) 4.00 mm 2 6200040 0.90 9.9 129 62000440 4 0.4 11.0 161 62000540 5 0.484 12. 199 62000740 7 0.55 1.6 259 10 AWG ( 78/28) 6.00 mm 2 6200060 0.457 11.6 18 62000460 4 0.508 12.9 20 62000560 5 0.567 14.4 284 62000760 7 0.606 15.4 70 8 AWG ( 77/26) 10.00 mm 2 62000461 4 0.665 16.9 94 62000561 5 0.740 18.8 480 62000761 7 0.82 20.9 68 6 AWG ( 122/26) 16.00 mm 2 62000462 4 0.819 20.8 601 62000562 5 0.91 2.2 751 62000762 7 1.012 25.7 974 4 AWG ( 190/26) 25.00 mm 2 6200046 4 0.980 24.9 9 6200056 5 1.106 28.1 1176 2 AWG ( 272/26) 5.00 mm 2 62000464 4 1.14 28.8 1295 62000564 5 1.280 2.5 1622 E-mail: info@sab.com Web site: www.sab.com
HALOGEN-FREE ABLES A 205 FRN ontrol with colored and improved fire performance and extended temperature range BRÖSES D-VIERSEN XA205 FRN 5 G 1.5 mm 2 Marking for XA 205 FRN 62050515: A BRÖSES D-VIERSEN XA205 FRN 5 G 1.5 mm 2 A A 205 FRN is a, multi-conductor, flexible power and control designed with colored in acc. with HD 08 (VDE 029 part 08) for use in all electrical equipment in dry, damp and wet conditions. Recommended applications include machinery, data processing equipment, ventilation and air conditioning systems. In case of fire, no corrosive gases are produced. This is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire. onductor: bare copper strands acc. to IE 60228, EN 60228, VDE 0295, class 5 A olor code: colored acc. to HD 08 (VDE 029 part 08); green-yellow earth wire from A gray very flexible very good stripping Nominal voltage: Uo/U 00/500 V Testing voltage U: 000 V acc. to DIN VDE 0281 part 2 + HD 21.2 fixed installation: free movement: static: flexing: 4 x O.D. 6 x O.D. -40/+85-0/+85 Zero halogen: acc. to DIN VDE 0472 part 815 and IE 60754-1 Burning characteristics: acc. to IE 602 + EN 602 cat. resp. D. Flame retardant and self-extinguishing acc. to IE 602-1-2 and EN 602-1-2 orrosivity: in compliance with IE 60754-2 and EN 50267-2-2 + VDE 0482 part 267-2-2 - Smoke density: acc. to IE 6104 + EN 6104 Weather resistance: good good 20 AWG ( 16/2) 0.50 mm 2 62050205 2 0.197 5.0 6205005 0.209 5. 62050405 4 0.224 5.7 62050505 5 0.26 6.0 62050705 7 0.272 6.9 19 AWG ( 2/2) 0.75 mm 2 62050207 2 0.220 5.6 6205007 0.22 5.9 62050407 4 0.260 6.6 62050507 5 0.28 7.2 62050707 7 0.15 8.0 18 AWG ( 0/2) 1.00 mm 2 62050210 2 0.228 5.8 6205010 0.248 6. 62050410 4 0.268 6.8 62050510 5 0.0 7.7 62050710 7 0.27 8. 25 29 4 42 52 2 8 47 56 71 6 45 54 67 8 16 AWG ( 27-29/0) 1.50 mm 2 62050215 2 0.260 6.6 6205015 0.276 7.0 62050415 4 0.07 7.8 62050515 5 0.5 8.5 62050715 7 0.70 9.4 14 AWG ( 46/0) 2.50 mm 2 62050225 2 0.15 8.0 6205025 0.5 8.5 62050425 4 0.70 9.4 62050525 5 0.41 10.5 62050725 7 0.449 11.4 12 AWG ( 52/28) 4.00 mm 2 6205040 0.90 9.9 62050440 4 0.4 11.0 62050540 5 0.520 1.2 48 58 7 87 112 7 88 110 12 171 129 161 199 10 AWG ( 78/28) 6.00 mm 2 6205060 0.457 11.6 62050460 4 0.488 12.4 62050560 5 0.567 14.4 8 AWG ( 77/26) 10.00 mm 2 6205061 0.602 15. 62050461 4 0.665 16.9 62050561 5 0.740 18.8 6 AWG ( 122/26) 16.00 mm 2 62050462 4 0.819 20.8 4 AWG ( 190/26) 25.00 mm 2 6205046 4 0.980 24.9 2 AWG ( 272/26) 5.00 mm 2 62050464 4 1.14 28.8 1 AWG ( 400/26) 50.00 mm 2 62050465 4 1.11. 184 20 284 16 94 481 601 9 1295 1768 19 E-mail: info@sab.com Web site: www.sab.com
HALOGEN-FREE ABLES A 28 FRN ontrol with numbered, overall tinned copper screen improved fire performance and extended temperature range D-VIERSEN XA28 FRN 5 G 1.5 mm 2 Marking for XA 28 FRN 6280515: A BRÖSES D-VIERSEN XA28 FRN 5 G 1.5 mm 2 A A 28 FRN is a, tinned copper braid, multi-conductor, flexible control with a smaller OD for tighter installations designed for use in all electrical equipment in dry, damp and wet conditions. An overall tinned copper braid is recommended whenever electrical interference distorts signal transmission, or when EMI emissions need to be suppressed. Recommended applications include machine tools, assembley lines, controls systems, data processing equipment, connections between control panels and machines, N machining centers, grinding machines and bottling equipment. In case of fire, no corrosive gases are produced. This is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire. onductor: olor code: Wrapping: Screen: bare copper strands acc. to IE 60228, EN 60228, VDE 0295, class 5 A black with consecutive numbers acc. to EN 504; green-yellow earth wire from PETP foil tinned copper braiding A gray good EM characteristics* very good stripping * opper braiding should be connected circularly to optimize * the EM characteristics Nominal voltage: Uo/U 00/500 V Testing voltage U: 000 V acc. to DIN VDE 0281 part 2 + HD 21.2 conductor/screen 1000 V fixed installation: free movement: static: flexing: 05 x O.D. 10 x O.D. -40/+85-0/+85 Zero halogen: acc. to DIN VDE 0472 part 815 and IE 60754-1 Burning characteristics: acc. to IE 602 + EN 602 cat. resp. D. Flame retardant and self-extinguishing acc. to IE 602-1-2 and EN 602-1-2 orrosivity: in compliance with IE 60754-2 and EN 50267-2-2 + VDE 0482 part 267-2-2 - Smoke density: acc. to IE 6104 + EN 6104 good Weather resistance: good 20 20 AWG ( 16/2) 0.50 mm 2 6280205 2 0.217 5.5 628005 0.228 5.8 6280405 4 0.252 6.4 6280505 5 0.256 6.5 6280705 7 0.291 7.4 6281205 12 0.86 9.8 6281805 18 0.457 11.6 6282505 25 0.58 14.8 28 4 42 50 58 96 144 192 18 AWG ( 0/2) 1.00 mm 2 6280210 2 0.256 6.5 628010 0.268 6.8 6280410 4 0.287 7. 6280510 5 0.2 8.2 6280710 7 0.46 8.8 6281210 12 0.472 12.0 6281810 18 0.551 14.0 6282510 25 0.669 17.0 41 49 59 75 91 161 22 14 14 AWG ( 46/0) 2.50 mm 2 6280225 2 0.5 8.5 628025 0.62 9.2 6280425 4 0.90 9.9 6280525 5 0.441 11.2 6280725 7 0.484 12. 6281225 12 0.654 16.6 6281825 18 0.768 19.5 6282525 25 0.929 2.6 71 9 114 149 192 28 70 67 19 AWG ( 2/2) 0.75 mm 2 6280207 2 0.248 6. 628007 0.260 6.6 6280407 4 0.280 7.1 6280507 5 0.11 7.9 6280707 7 0.5 8.5 6281207 12 0.449 11.4 6281807 18 0.51 1.5 6282507 25 0.646 16.4 7 44 52 65 79 16 195 275 16 AWG ( 27-29/0) 1.50 mm 2 6280215 2 0.280 7.1 628015 0.0 7.7 6280415 4 0.27 8. 6280515 5 0.62 9.2 6280715 7 0.90 9.9 6281215 12 0.51 1.5 6281815 18 0.626 15.9 6282515 25 0.760 19. 50 65 78 96 119 210 06 421 12 AWG ( 52/28) 4.00 mm 2 6280440 4 0.461 11.7 17 6280540 5 0.512 1.0 212 10 AWG ( 78/28) 6.00 mm 2 6280460 4 0.54 1.8 24 6280560 5 0.610 15.5 1 8 AWG ( 77/26) 10.00 mm 2 6280461 4 0.709 18.0 42 6 AWG ( 122/26) 16.00 mm 2 6280462 4 0.854 21.7 618 E-mail: info@sab.com Web site: www.sab.com
HALOGEN-FREE ABLES A 260 PUR old-flexible, oil resistant control with numbered BRÖSES D-VIERSEN XA260 PUR 7 x Marking for XA 260 PUR 52600715: A BRÖSES D-VIERSEN XA260 PUR 7 G 1.5 mm 2 A A 260 PUR is a, multi-conductor, flexible power and control with a polyurethane outer jacket designed for use in all electrical equipment in dry, damp and wet conditions. Recommended applications include machinery, data processing equipment. This has a very good resistance against acids, alkalines, solvents, hydraulic liquids and oil. In case of fire, no corrosive gases are produced. This is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire. onductor: olor code: Inner jacket: bare copper strands acc. to IE 60228, EN 60228, VDE 0295, class 5 A black with consecutive numbers acc. to EN 504; green-yellow earth wire from A - from 12 AWG PUR, TMPU acc. to DIN VDE 0282 part 10 + HD 22.10 gray oil resistant flexible at low temperatures weather resistant Nominal voltage: Uo/U 00/500 V Testing voltage U: 000 V acc. to DIN VDE 0281 part 2 + HD 21.2 fixed installation: free movement: Radiation resistance: static: flexing: 4 x O.D. 6 x O.D. 5 x 10 7 cj/kg -50/+90-40/+90 Zero halogen: acc. to DIN VDE 0472 part 815 and IE 60754-1 Oil resistance: very good -TMPU acc. to DIN VDE 0282 part 10 + HD22.10 hemical resistance: Weather resistance: good against acids, alkalines, solvents, hydraulic liquids etc. very good good 19 AWG ( 2/2) 0.75 mm 2 52600207 2 0.220 5.6 5260007 0.22 5.9 52600407 4 0.252 6.4 52600507 5 0.276 7.0 52600707 7 0.299 7.6 52601007 10 0.78 9.6 52601207 12 0.406 10. 52601807 18 0.472 12.0 52602507 25 0.579 14.7 18 AWG ( 0/2) 1.00 mm 2 52600210 2 0.228 5.8 5260010 0.240 6.1 52600410 4 0.260 6.6 52600510 5 0.287 7. 52600710 7 0.11 7.9 52601010 10 0.409 10.4 52601210 12 0.421 10.7 52601810 18 0.492 12.5 52602510 25 0.602 15. 26 2 8 46 58 80 97 18 191 0 6 44 54 69 96 116 166 229 16 AWG ( 27-29/0) 1.50 mm 2 52600215 2 0.252 6.4 5260015 0.268 6.8 52600415 4 0.291 7.4 52600515 5 0.19 8.1 52600715 7 0.46 8.8 52601015 10 0.457 11.6 52601215 12 0.472 12.0 52601815 18 0.551 14.0 52602515 25 0.669 17.0 14 AWG ( 46/0) 2.50 mm 2 52600225 2 0.299 7.6 5260025 0.5 8.5 52600425 4 0.46 8.8 52600525 5 0.98 10.1 52600725 7 0.4 11.0 52601025 10 0.551 14.0 52601225 12 0.587 14.9 52601825 18 0.685 17.4 52602525 25 0.854 21.7 8 48 59 72 9 128 157 226 0 58 77 91 116 151 209 251 62 507 12 AWG ( 52/28) 4.00 mm 2 5260040 0.461 11.7 1 52600440 4 0.496 12.6 16 52600540 5 0.59 1.7 197 10 AWG ( 78/28) 6.00 mm 2 5260060 0.551 14.0 195 52600460 4 0.594 15.1 240 52600560 5 0.646 16.4 290 8 AWG ( 77/26) 10.00 mm 2 52600461 4 0.744 18.9 91 52600561 5 0.811 20.6 476 6 AWG ( 122/26) 16.00 mm 2 52600462 4 0.874 22.2 572 52600562 5 0.961 24.4 700 21 E-mail: info@sab.com Web site: www.sab.com
temperature resistant up to + 220 HALOGEN-FREE ABLES A 10 HT High temperature resistant control with numbered or colored ÖSES D-VIERSEN XA10 HT 4 G 1.5 mm 2 Marking for XA 10 HT 7100415: A BRÖSES D-VIERSEN XA10 HT 4 G 1.5 mm 2 A A 10 HT is a, high temperature resistant, multi-conductor, flexible, power and control designed for use in all electrical equipment in dry, damp and wet conditions. Recommended applications include machinery, data processing equipment, ventilation and air conditioning systems. In case of fire, no corrosive gases are produced. This is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire. onductor: olor code: silver-plated copper strands acc. to IE 60228, EN 60228, VDE 0295, class 5 A colored acc. to HD 08 (VDE 029 part 08); from a green-yellow earth wire; from 6 black insulation with consecutive numbers acc. to EN 504 and a green-yellow earth wire A gray high temperature resistant flexible Nominal voltage: Uo/U 00/500 V Testing voltage U: 2000 V acc. to DIN VDE 0281 part 2 + HD 21.2 fixed installation: free movement: static: flexing: 4 x O.D. 6 x O.D. -40/+220-25/+220 Zero halogen: acc. to DIN VDE 0472 part 815 and IE 60754-1 Burning characteristics: acc. to IE 602-1-2 and EN 602-1-2 orrosivity: in compliance with IE 60754-2 and EN 50267-2-2 + VDE 0482 part 267-2-2-22 20 AWG ( 16/2) 0.50 mm 2 7100205 2 0.197 5.0 710005 0.209 5. 7100405 4 0.224 5.7 7100505 5 0.248 6. 7100705 7 0.268 6.8 7101005 10 0.46 8.8 7101205 12 0.58 9.1 7101805 18 0.425 10.8 19 AWG ( 2/2) 0.75 mm 2 7100207 2 0.220 5.6 710007 0.22 5.9 7100407 4 0.252 6.4 7100507 5 0.280 7.1 7100707 7 0.11 7.9 7101007 10 0.402 10.2 7101207 12 0.41 10.5 7101807 18 0.492 12.5 18 AWG ( 0/2) 1.00 mm 2 7100210 2 0.228 5.8 710010 0.240 6.1 7100410 4 0.264 6.7 7100510 5 0.287 7. 7100710 7 0.2 8.2 7101010 10 0.417 10.6 7101210 12 0.429 10.9 7101810 18 0.512 1.0 7102510 25 0.618 15.7 20 24 0 6 45 64 7 108 26 2 9 49 62 89 102 151 0 7 46 57 74 109 121 179 241 16 AWG ( 27-29/0) 1.50 mm 2 7100215 2 0.264 6.7 710015 0.280 7.1 7100415 4 0.11 7.9 7100515 5 0.46 8.8 7100715 7 0.78 9.6 7101015 10 0.496 12.6 7101215 12 0.512 1.0 7101815 18 0.614 15.6 7102515 25 0.740 18.8 14 AWG ( 46/0) 2.50 mm 2 7100225 2 0.2 8.2 710025 0.4 8.7 7100425 4 0.74 9.5 7100525 5 0.425 10.8 7100725 7 0.465 11.8 7101025 10 0.606 15.4 7101225 12 0.626 15.9 7101825 18 0.740 18.8 12 AWG ( 52/28) 4.00 mm 2 710040 0.409 10.4 7100440 4 0.445 11. 7100540 5 0.500 12.7 7100740 7 0.54 1.8 41 51 65 8 104 150 17 259 51 64 81 100 129 165 25 27 402 122 151 192 245 10 AWG ( 78/28) 6.00 mm 2 710060 0.457 11.6 167 7100460 4 0.500 12.7 210 7100560 5 0.551 14.0 261 7100760 7 0.618 15.7 46 8 AWG ( 77/26) 10.00 mm 2 7100461 4 0.740 18.8 400 7100561 5 0.819 20.8 499 7100761 7 0.91 2.2 669 6 AWG ( 122/26) 16.00 mm 2 7100462 4 0.850 21.6 607 7100562 5 0.957 24. 770 7100762 7 1.047 26.6 999 4 AWG ( 190/26) 25.00 mm 2 710026 2 0.882 22.4 560 710046 4 1.047 26.6 90 710056 5 1.161 29.5 1160 2 AWG ( 272/26) 5.00 mm 2 710064 1.055 26.8 965 7100464 4 1.161 29.5 1222 E-mail: info@sab.com Web site: www.sab.com
HALOGEN-FREE ABLES 625 FRN M ontrol with numbered 21089 75 600V SA AWM I/II A/B 80 600V FT1 FT Marking for X 625 FRN M 62521612: A BRÖSES D-VIERSEN 62521215 12 G 1.5 mm 2 X 625 FRN M 16 AWG/12c 62521612 U AWM Style 21089 75 600V SA AWM I/II A/B 80 600V FT1 A 625 FRN M is a, multi-conductor, flexible power and control designed for use in all electrical equipment in dry, damp, and wet conditions. Recommended applications include machinery, data processing equipment, ventilation and air conditioning systems. In case of fire, no corrosive gases are produced. This is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire. onductor: olor code: bare copper strands acc. to IE 60228, EN 60228, VDE 0295, class 5 FRN black with consecutive numbers acc. to EN 504; green-yellow earth wire from FRN gray UL recognized, SA approved flexible Nominal voltage: UL/SA: 600 V DINVDE: Uo/U 00/500 V Testing voltage: 000 V acc. to DIN VDE 0281 part 2 + HD 21.2 fixed installation: < 12 mm = x O.D. > 12 mm = 4 x O.D. free movement: < 12 mm = 5 x O.D. > 12 mm = 6 x O.D. DIN VDE: UL: up to +75 SA: up to +80 static: -40/+90 flexing: -0/+90 Zero halogen: acc. to DIN VDE 0472 part 815 and IE 60754-1 Burning characteristics: acc. to IE 602 + EN 602 cat. resp. D. Flame retardant and self-extinguishing acc. to IE 602-1-2 and EN 602-1-2, SAFT1 orrosivity: in compliance with IE 60754-2 and EN 50267-2-2 + VDE 0482 part 267-2-2 - Smoke density: acc. to IE 6104 + EN 6104 good 20 AWG ( 16/2) 0.50 mm 2 62522002 2 0.205 5.2 6252200 0.217 5.5 62522004 4 0.22 5.9 62522005 5 0.252 6.4 62522007 7 0.276 7.0 62522008 8 0.2 8.2 62522009 9 0.50 8.9 62522010 10 0.58 9.1 62522012 12 0.66 9. 62522014 14 0.86 9.8 62522016 16 0.41 10.5 62522018 18 0.47 11.1 62522025 25 0.51 1.5 6252200 0 0.547 1.9 6252204 4 0.598 15.2 62522040 40 0.650 16.5 62522041 41 0.650 16.5 62522061 61 0.760 19. 27 2 8 44 56 70 79 81 91 10 119 12 181 208 29 28 288 409 19 AWG ( 2/2) 0.75 mm 2 62521902 2 0.224 5.7 6252190 0.26 6.0 62521904 4 0.256 6.5 62521905 5 0.280 7.1 62521907 7 0.11 7.9 62521908 8 0.66 9. 62521909 9 0.90 9.9 62521910 10 0.98 10.1 62521912 12 0.417 10.6 62521914 14 0.47 11.1 62521916 16 0.469 11.9 62521918 18 0.492 12.5 62521925 25 0.598 15.2 6252190 0 0.618 15.7 6252194 4 0.67 17.1 62521940 40 0.72 18.6 62521941 41 0.72 18.6 62521961 61 0.866 22.0 2 8 46 54 71 89 97 100 118 12 152 168 21 267 04 60 66 528 18 AWG ( 0/2) 1.00 mm 2 62521802 2 0.22 5.9 6 6252180 0.248 6. 44 62521804 4 0.268 6.8 54 62521805 5 0.295 7.5 65 62521807 7 0.2 8.2 8 62521808 8 0.78 9.6 102 62521809 9 0.41 10.5 116 62521810 10 0.421 10.7 120 62521812 12 0.4 11.0 17 62521814 14 0.45 11.5 155 62521818 18 0.512 1.0 198 62521825 25 0.622 15.8 271 6252180 0 0.654 16.6 21 6252184 4 0.709 18.0 65 62521840 40 0.768 19.5 429 62521841 41 0.768 19.5 454 62521861 61 0.902 22.9 626 ontinued on next page 2 E-mail: info@sab.com Web site: www.sab.com
HALOGEN-FREE ABLES 625 FRN M ontrol with numbered 9 75 600V SA AWM I/II A/B 80 600V FT1 FT2 Marking for X 625 FRN M 62521612: A BRÖSES D-VIERSEN 62521215 12 G 1.5 mm 2 X 625 FRN M 16 AWG/12c 62521612 U AWM Style 21089 75 600V SA AWM I/II A/B 80 600V FT1 A 625 FRN M is a, multi-conductor, flexible power and control designed for use in all electrical equipment in dry, damp, and wet conditions. Recommended applications include machinery, data processing equipment, ventilation and air conditioning systems. In case of fire, no corrosive gases are produced. This is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire. onductor: olor code: bare copper strands acc. to IE 60228, EN 60228, VDE 0295, class 5 FRN black with consecutive numbers acc. to EN 504; green-yellow earth wire from FRN gray UL recognized, SA approved flexible Nominal voltage: UL/SA: 600 V DINVDE: Uo/U 00/500 V Testing voltage: 000 V acc. to DIN VDE 0281 part 2 + HD 21.2 fixed installation: < 12 mm = x O.D. > 12 mm = 4 x O.D. free movement: < 12 mm = 5 x O.D. > 12 mm = 6 x O.D. DIN VDE: UL: up to +75 SA: up to +80 static: -40/+90 flexing: -0/+90 Zero halogen: acc. to DIN VDE 0472 part 815 and IE 60754-1 Burning characteristics: acc. to IE 602 + EN 602 cat. resp. D. Flame retardant and self-extinguishing acc. to IE 602-1-2 and EN 602-1-2, SAFT1 orrosivity: in compliance with IE 60754-2 and EN 50267-2-2 + VDE 0482 part 267-2-2 - Smoke density: acc. to IE 6104 + EN 6104 good 24 16 AWG ( 27-29/0) 1.50 mm 2 62521602 2 0.256 6.5 6252160 0.272 6.9 62521604 4 0.299 7.6 62521605 5 0.27 8. 62521607 7 0.66 9. 62521608 8 0.429 10.9 62521609 9 0.465 11.8 62521610 10 0.476 12.1 62521612 12 0.488 12.4 62521614 14 0.512 1.0 62521618 18 0.587 14.9 62521625 25 0.71 18.1 6252160 0 0.76 18.7 6252164 4 0.807 20.5 62521640 40 0.874 22.2 62521641 41 0.874 22.2 62521661 61 1.024 26.0 46 57 71 87 112 16 15 161 184 209 271 75 45 502 587 59 861 14 AWG ( 46/0) 2.50 mm 2 62521402 2 0.07 7.8 6252140 0.27 8. 62521404 4 0.62 9.2 62521405 5 0.98 10.1 62521407 7 0.441 11.2 62521408 8 0.528 1.4 62521409 9 0.56 14. 62521409 10 0.58 14.8 62521412 12 0.602 15. 62521418 18 0.717 18.2 62521425 25 0.878 22. 12 AWG ( 52/28) 4.00 mm 2 6252120 0.82 9.7 62521204 4 0.425 10.8 62521205 5 0.476 12.1 62521207 7 0.528 1.4 70 86 108 11 17 212 24 252 290 425 585 126 160 198 261 10 AWG ( 78/28) 6.00 mm 2 6252100 0.449 11.4 182 62521004 4 0.500 12.7 20 62521005 5 0.559 14.2 286 8 AWG ( 77/26) 10.00 mm 2 62520804 4 0.677 17.2 409 62520805 5 0.760 19. 508 6 AWG ( 122/26) 16.00 mm 2 62520604 4 0.81 21.1 611 4 AWG ( 190/26) 25.00 mm 2 62520404 4 1.04 26.5 991 2 AWG ( 272/26) 5.00 mm 2 62520204 4 1.189 0.2 147 E-mail: info@sab.com Web site: www.sab.com
HALOGEN-FREE ABLES 625 S FRN M ontrol with numbered and overall tinned copper screen 75 600V SA AWM I/II A/B 80 600V FT1 FT Marking for X 625 S FRN M 6241612: A BRÖSES D-VIERSEN 6241215 12 G 1.5 mm 2 X 625 S FRN M 16 AWG/12c 6241612 U AWM Style 21089 75 600V SA AWM I/II A/B 80 600V FT1 A 625 S FRN M is multi-conductor, shielded, flexible control with a smaller OD for tighter installations. It is designed for use in all electrical equipment in dry, damp, and wet conditions. An overall tinned copper braid is recommended whenever electrical interference distorts signal transmission, or when EMI emissions need to be suppressed. Recommended applications include machine tools, assembly lines, control systems, data processing equipment, connections between control panels and machines, N machining centers, grinding machines and bottling equipment. In case of fire, no corrosive gases are produced. This is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire. onductor: olor code: Wrapping: Screen: bare copper strands acc. to IE 60228, EN 60228, VDE 0295, class 5 FRN black with consecutive numbers acc. to EN 504; green-yellow earth wire from PETP foil tinned copper braiding FRN gray UL recognized, SA approved good EM characteristics* flexible * opper braiding should be connected circularly to optimize * the EM characteristics Nominal voltage: UL/SA: 600 V DINVDE: Uo/U 00/500 V Testing voltage: 000 V acc. to DIN VDE 0281 part 2 + HD 21.2 conductor/screen 1000 V fixed installation: 5 x O.D. free movement: 10 x O.D. DIN VDE: UL: up to +75 SA: up to +80 static: -40/+90 flexing: -0/+90 Zero halogen: acc. to DIN VDE 0472 part 815 and IE 60754-1 Burning characteristics: acc. to IE 602 + EN 602 cat. resp. D. Flame retardant and self-extinguishing acc. to IE 602-1-2 and EN 602-1-2, SA FT1 orrosivity: in compliance with IE 60754-2 and EN 50267-2-2 + VDE 0482 part 267-2-2 - Smoke density: acc. to IE 6104 + EN 6104 good 20 AWG ( 16/2) 0.50 mm 2 6242002 2 0.224 5.7 624200 0.26 6.0 6242004 4 0.252 6.4 6242005 5 0.276 7.0 6242007 7 0.299 7.6 6242008 8 0.50 8.9 6242009 9 0.70 9.4 6242010 10 0.78 9.6 6242012 12 0.86 9.8 6242014 14 0.421 10.7 6242016 16 0.441 11.2 6242018 18 0.472 12.0 6242025 25 0.54 1.8 624200 0 0.591 15.0 624204 4 0.642 16. 6242040 40 0.69 17.6 6242041 41 0.69 17.6 6242061 61 0.795 20.2 0 6 4 51 65 81 88 91 102 126 18 157 206 24 288 8 45 466 19 AWG ( 2/2) 0.75 mm 2 6241902 2 0.244 6.2 624190 0.256 6.5 6241904 4 0.276 7.0 6241905 5 0.07 7.8 6241907 7 0.1 8.4 6241908 8 0.86 9.8 6241909 9 0.425 10.8 6241910 10 0.4 11.0 6241912 12 0.445 11. 6241914 14 0.472 12.0 6241916 16 0.496 12.6 6241918 18 0.520 1.2 6241925 25 0.642 16. 624190 0 0.661 16.8 624194 4 0.717 18.2 6241940 40 0.776 19.7 6241941 41 0.776 19.7 6241961 61 0.902 22.9 5 4 52 6 79 97 122 122 19 158 174 192 280 14 59 420 427 591 18 AWG ( 0/2) 1.00 mm 2 6241802 2 0.252 6.4 9 624180 0.268 6.8 49 6241804 4 0.287 7. 58 6241805 5 0.15 8.0 72 6241807 7 0.50 8.9 9 6241808 8 0.98 10.1 111 6241809 9 0.441 11.2 14 6241810 10 0.449 11.4 141 6241812 12 0.469 11.9 162 6241814 14 0.488 12.4 180 6241818 18 0.547 1.9 228 6241825 25 0.665 16.9 25 624180 0 0.697 17.7 74 624184 4 0.752 19.1 42 6241840 40 0.811 20.6 491 6241841 41 0.811 20.6 499 6241861 61 0.945 24.0 700 ontinued on next page 25 E-mail: info@sab.com Web site: www.sab.com
HALOGEN-FREE ABLES 625 S FRN M ontrol with numbered and overall tinned copper screen 600V SA AWM I/II A/B 80 600V FT1 FT2 Marking for X 625 S FRN M 6241612: A BRÖSES D-VIERSEN 6241215 12 G 1.5 mm 2 X 625 S FRN M 16 AWG/12c 6241612 U AWM Style 21089 75 600V SA AWM I/II A/B 80 600V FT1 A 625 S FRN M is multi-conductor, shielded, flexible control with a smaller OD for tighter installations. It is designed for use in all electrical equipment in dry, damp, and wet conditions. An overall tinned copper braid is recommended whenever electrical interference distorts signal transmission, or when EMI emissions need to be suppressed. Recommended applications include machine tools, assembly lines, control systems, data processing equipment, connections between control panels and machines, N machining centers, grinding machines and bottling equipment. In case of fire, no corrosive gases are produced. This is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire. onductor: olor code: Wrapping: Screen: bare copper strands acc. to IE 60228, EN 60228, VDE 0295, class 5 FRN black with consecutive numbers acc. to EN 504; green-yellow earth wire from PETP foil tinned copper braiding FRN gray UL recognized, SA approved good EM characteristics* flexible * opper braiding should be connected circularly to optimize * the EM characteristics Nominal voltage: UL/SA: 600 V DINVDE: Uo/U 00/500 V Testing voltage: 000 V acc. to DIN VDE 0281 part 2 + HD 21.2 conductor/screen 1000 V fixed installation: 5 x O.D. free movement: 10 x O.D. DIN VDE: UL: up to +75 SA: up to +80 static: -40/+90 flexing: -0/+90 Zero halogen: acc. to DIN VDE 0472 part 815 and IE 60754-1 Burning characteristics: acc. to IE 602 + EN 602 cat. resp. D. Flame retardant and self-extinguishing acc. to IE 602-1-2 and EN 602-1-2, SA FT1 orrosivity: in compliance with IE 60754-2 and EN 50267-2-2 + VDE 0482 part 267-2-2 - Smoke density: acc. to IE 6104 + EN 6104 good 26 16 AWG ( 27-29/0) 1.50 mm 2 6241602 2 0.276 7.0 624160 0.295 7.5 6241604 4 0.19 8.1 6241605 5 0.54 9.0 6241607 7 0.86 9.8 6241608 8 0.465 11.8 6241609 9 0.492 12.5 6241610 10 0.504 12.8 6241612 12 0.524 1. 6241614 14 0.547 1.9 6241618 18 0.622 15.8 6241625 25 0.756 19.2 624160 0 0.780 19.8 624164 4 0.84 21.4 6241640 40 0.909 2.1 6241641 41 0.909 2.1 6241661 61 1.067 27.1 48 62 76 9 120 159 174 18 210 28 12 4 49 561 647 65 94 14 AWG ( 46/0) 2.50 mm 2 6241402 2 0.27 8. 624140 0.54 9.0 6241404 4 0.82 9.7 6241405 5 0.4 11.0 6241407 7 0.476 12.1 6241408 8 0.555 14.1 6241409 9 0.598 15.2 6241410 10 0.618 15.7 6241412 12 0.646 16.4 6241418 18 0.760 19. 6241425 25 0.921 2.4 12 AWG ( 52/28) 4.00 mm 2 624120 0.417 10.6 6241204 4 0.45 11.5 6241205 5 0.504 12.8 6241207 7 0.555 14.1 68 91 11 148 192 2 259 288 1 478 648 18 172 212 277 10 AWG ( 78/28) 6.00 mm 2 624100 0.484 12. 191 6241004 4 0.55 1.6 24 6241005 5 0.594 15.1 02 8 AWG ( 77/26) 10.00 mm 2 6240804 4 0.720 18. 427 6240805 5 0.795 20.2 526 6 AWG ( 122/26) 16.00 mm 2 6240604 4 0.874 22.2 62 4 AWG ( 190/26) 25.00 mm 2 6240404 4 1.079 27.4 974 2 AWG ( 272/26) 5.00 mm 2 6240204 4 1.22 1. 116 E-mail: info@sab.com Web site: www.sab.com
HALOGEN-FREE ABLES 625 SH FRN M ontrol with numbered, inner jacket and overall tinned copper screen 600V SA AWM I/II A/B 80 600V FT1 FT2 Marking for X 625 SH FRN M 62571612: A BRÖSES D-VIERSEN 62571215 12 G 1.5 mm 2 X 625 SH FRN M 16AWG/12c 62571612 U AWM Style 21089 75 600V SA AWM I/II A/B 80 600V FT1 A 625 SH FRN M is multi-conductor, shielded, flexible control designed for use in all electrical equipment in dry, damp, and wet conditions. An overall tinned copper braid is recommended whenever electrical interference distorts signal transmission, or when EMI emissions need to be suppressed. Recommended applications include machine tools, assembly lines, control systems, data processing equipment, connections between control panels and machines, N machining centers, grinding machines and bottling equipment. In case of fire, no corrosive gases are produced. This is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire. onductor: olor code: Inner jacket: Screen: bare copper strands acc. to IE 60228, EN 60228, VDE 0295, class 5 FRN black with consecutive numbers acc. to EN 504; green-yellow earth wire from FRN tinned copper braiding FRN gray UL recognized, SA approved good EM characteristics* flexible * opper braiding should be connected circularly to optimize * the EM characteristics Nominal voltage: UL/SA: 600 V DINVDE: Uo/U 00/500 V Testing voltage: 000 V acc. to DIN VDE 0281 part 2 + HD 21.2 conductor/screen 1000 V fixed installation: 05 x O.D. free movement: 10 x O.D. DIN VDE: UL: up to +75 SA: up to +80 static: -40/+90 flexing: -0/+90 Zero halogen: acc. to DIN VDE 0472 part 815 and IE 60754-1 Burning characteristics: acc. to IE 602 + EN 602 cat. resp. D. Flame retardant and self-extinguishing acc. to IE 602-1-2 and EN 602-1-2, SA FT1 orrosivity: in compliance with IE 60754-2 and EN 50267-2-2 + VDE 0482 part 267-2-2 - Smoke density: acc. to IE 6104 + EN 6104 good 20 AWG ( 16/2) 0.50 mm 2 62572002 2 0.276 7.0 6257200 0.287 7. 62572004 4 0.07 7.8 62572005 5 0.1 8.4 62572007 7 0.58 9.1 62572008 8 0.409 10.4 62572009 9 0.47 11.1 62572010 10 0.445 11. 62572012 12 0.45 11.5 62572014 14 0.488 12.4 62572016 16 0.508 12.9 62572018 18 0.59 1.7 62572025 25 0.642 16. 6257200 0 0.657 16.7 6257204 4 0.709 18.0 62572040 40 0.768 19.5 62572041 41 0.768 19.5 62572061 61 0.878 22. 50 55 64 74 90 110 127 12 14 164 180 199 275 0 4 405 409 546 19 AWG ( 2/2) 0.75 mm 2 62571902 2 0.299 7.6 6257190 0.11 7.9 62571904 4 0.1 8.4 62571905 5 0.66 9. 62571907 7 0.90 9.9 62571908 8 0.45 11.5 62571909 9 0.484 12. 62571910 10 0.500 12.7 62571912 12 0.512 1.0 62571914 14 0.59 1.7 62571916 16 0.56 14. 62571918 18 0.594 15.1 62571925 25 0.709 18.0 6257190 0 0.76 18.7 6257194 4 0.791 20.1 62571940 40 0.850 21.6 62571941 41 0.850 21.6 62571961 61 0.992 25.2 58 65 76 90 108 140 155 164 179 200 220 24 5 78 427 494 501 691 18 AWG ( 0/2) 1.00 mm 2 62571802 2 0.07 7.8 6 6257180 0.2 8.2 7 62571804 4 0.50 8.9 87 62571805 5 0.74 9.5 100 62571807 7 0.409 10.4 12 62571808 8 0.480 12.2 162 62571809 9 0.508 12.9 177 62571810 10 0.524 1. 186 62571812 12 0.55 1.6 204 62571814 14 0.555 14.1 226 62571818 18 0.622 15.8 289 62571825 25 0.740 18.8 84 6257180 0 0.772 19.6 442 6257184 4 0.827 21.0 492 62571840 40 0.886 22.5 568 62571841 41 0.886 22.5 576 62571861 61 1.05 26. 800 ontinued on next page 27 E-mail: info@sab.com Web site: www.sab.com
HALOGEN-FREE ABLES 625 SH FRN M ontrol with numbered, inner jacket and overall tinned copper screen 0V SA AWM I/II A/B 80 600V FT1 FT2 Marking for X 625 SH FRN M 62571612: A BRÖSES D-VIERSEN 62571215 12 G 1.5 mm 2 X 625 SH FRN M 16AWG/12c 62571612 U AWM Style 21089 75 600V SA AWM I/II A/B 80 600V FT1 A 625 SH FRN M is multi-conductor, shielded, flexible control designed for use in all electrical equipment in dry, damp, and wet conditions. An overall tinned copper braid is recommended whenever electrical interference distorts signal transmission, or when EMI emissions need to be suppressed. Recommended applications include machine tools, assembly lines, control systems, data processing equipment, connections between control panels and machines, N machining centers, grinding machines and bottling equipment. In case of fire, no corrosive gases are produced. This is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire. onductor: olor code: Inner jacket: Screen: bare copper strands acc. to IE 60228, EN 60228, VDE 0295, class 5 FRN black with consecutive numbers acc. to EN 504; green-yellow earth wire from FRN tinned copper braiding FRN gray UL recognized, SA approved good EM characteristics* flexible * opper braiding should be connected circularly to optimize * the EM characteristics Nominal voltage: UL/SA: 600 V DINVDE: Uo/U 00/500 V Testing voltage: 000 V acc. to DIN VDE 0281 part 2 + HD 21.2 conductor/screen 1000 V fixed installation: free movement: 05 x O.D. 10 x O.D. DIN VDE: UL: up to +75 SA: up to +80 static: -40/+90 flexing: -0/+90 Zero halogen: acc. to DIN VDE 0472 part 815 and IE 60754-1 Burning characteristics: acc. to IE 602 + EN 602 cat. resp. D. Flame retardant and self-extinguishing acc. to IE 602-1-2 and EN 602-1-2, SA FT1 orrosivity: in compliance with IE 60754-2 and EN 50267-2-2 + VDE 0482 part 267-2-2 - Smoke density: acc. to IE 6104 + EN 6104 good 28 16 AWG ( 27-29/0) 1.50 mm2 62571602 2 0.1 8.4 6257160 0.54 9.0 62571604 4 0.78 9.6 62571605 5 0.421 10.7 62571607 7 0.45 11.5 62571608 8 0.51 1.5 62571609 9 0.559 14.2 62571610 10 0.579 14.7 62571612 12 0.591 15.0 62571614 14 0.622 15.8 62571618 18 0.697 17.7 62571625 25 0.81 21.1 6257160 0 0.854 21.7 6257164 4 0.925 2.5 62571640 40 1.000 25.4 62571641 41 1.000 25.4 62571661 61 1.157 29.4 75 91 106 14 16 202 222 25 259 00 74 50 570 644 751 757 1058 14 AWG ( 46/0) 2.50 mm 2 62571402 2 0.86 9.8 6257140 0.421 10.7 62571404 4 0.449 11.4 62571405 5 0.500 12.7 62571407 7 0.54 1.8 62571408 8 0.68 16.2 62571409 9 0.67 17.1 62571410 10 0.69 17.6 62571412 12 0.720 18. 62571418 18 0.85 21.2 62571425 25 1.004 25.5 12 AWG ( 52/28) 4.00 mm 2 6257120 0.484 12. 62571204 4 0.528 1.4 62571205 5 0.579 14.7 62571207 7 0.68 16.2 106 16 160 195 240 05 5 55 401 552 749 15 226 272 5 10 AWG ( 78/28) 6.00 mm 2 6257100 0.551 14.0 25 62571004 4 0.610 15.5 21 62571005 5 0.669 17.0 86 8 AWG ( 77/26) 10.00 mm 2 62570804 4 0.795 20.2 52 62570805 5 0.878 22. 645 6 AWG ( 122/26) 16.00 mm 2 62570604 4 0.957 24. 769 4 AWG ( 190/26) 25.00 mm 2 62570404 4 1.169 29.7 1181 2 AWG ( 272/26) 5.00 mm 2 62570204 4 1.1.8 1585 E-mail: info@sab.com Web site: www.sab.com
A 810 FRN HALOGEN-FREE ABLES Motor connection with numbered, improved fire performance and extended temperature range 0.6/1 kv BRÖSES D-VIERSEN XA810 FRN 0.6/1 kv 7 x 1 Marking for XA 810 FRN 68100715: A BRÖSES D-VIERSEN XA810 FRN 0.6/1 kv 7 G 1.5 mm 2 A A 810 FRN is a flexible,, motor power supply which has been designed for automation technology, control machinery, machine and industrial factory, motor construction and drive systems. onductor: olor code: bare copper strands acc. to IE 60228, EN 60228, VDE 0295, class 5 A black with consecutive numbers acc. to EN 504; green-yellow earth wire from A gray Nominal voltage: Uo/U 0.6/1 kv Testing voltage U: 4000 V acc. to DIN VDE 0281 part 2 + HD 21.2 fixed installation: free movement: static: flexing: 4 x O.D. 6 x O.D. -40/+85-0/+85 Zero halogen: acc. to DIN VDE 0472 part 815 and IE 60754-1 Burning characteristics: acc. to IE 602 + EN 602 cat. resp. D. Flame retardant and self-extinguishing acc. to IE 602-1-2 and EN 602-1-2 orrosivity: in compliance with IE 60754-2 and EN 50267-2-2 + VDE 0482 part 267-2-2 - Smoke density: acc. to IE 6104 + EN 6104 good 16 AWG ( 27-29/0) 1.50 mm 2 6810015 0.70 9.4 68100415 4 0.402 10.2 68100515 5 0.445 11. 68100715 7 0.480 12.2 86 10 124 151 10 AWG ( 78/28) 6.00 mm 2 6810060 0.524 1. 68100460 4 0.571 14.5 68100560 5 0.64 16.1 68100760 7 0.689 17.5 21 259 18 40 6 AWG ( 122/26) 16.00 mm 2 6810080 0.878 22. 68100480 4 0.961 24.4 68100580 5 1.067 27.1 68100780 7 1.165 29.6 58 712 87 1109 14 AWG ( 46/0) 2.50 mm 2 6810025 0.429 10.9 68100425 4 0.465 11.8 68100525 5 0.508 12.9 68100725 7 0.555 14.1 12 AWG ( 52/28) 4.00 mm 2 6810040 0.476 12.1 68100440 4 0.524 1. 68100540 5 0.575 14.6 68100740 7 0.60 16.0 121 144 172 215 162 198 29 02 8 AWG ( 77/26) 10.00 mm 2 6810070 0.72 18.6 68100470 4 0.799 20. 68100570 5 0.874 22.2 68100770 7 0.949 24.1 99 486 579 79 4 AWG ( 190/26) 25.00 mm 2 6810090 1.067 27.1 900 68100490 4 1.169 29.7 1106 68100590 5 1.291 2.8 150 68100790 7 1.41 5.9 1729 29 E-mail: info@sab.com Web site: www.sab.com
0.6/1 kv HALOGEN-FREE ABLES Motor connection with numbered, A 812 FRN improved fire performance, inner jacket, overall tinned copper screen and extended temperature range D-VIERSEN XA812 FRN 0,6/1 kv 7 x 1.5 mm 2 Marking for XA 812 FRN 68120715: A BRÖSES D-VIERSEN XA812 FRN 0.6/1 kv 7 G 1.5 mm 2 A A 812 FRN is a flexible,, shielded motor power supply which has been designed for automation technology, control machinery, machine and industrial factory, motor construction and drive systems. An overall tinned copper braid is recommended whenever electrical interference distorts signal transmission, or when EMI emission needs to be suppressed. onductor: bare copper strands acc. to DIN VDE 0295 class 5 + IE 60228 class 5 HD 8 class 5 olor code: Inner jacket: Screen: A black with consecutive numbers acc. to EN 504; green-yellow earth wire from A tinned copper braiding A gray good EM characteristics* * opper braiding should be connected circularly to optimize * the EM characteristics Nominal voltage: Uo/U 0.6/1 kv Testing voltage U: 4000 V acc. to DIN VDE 0281 part 2 + HD 21.2 conductor/screen 2000 V fixed installation: free movement: static: flexing: 05 x O.D. 10 x O.D. -40/+85-0/+85 Zero halogen: acc. to DIN VDE 0472 part 815 and IE 60754-1 Burning characteristics: acc. to IE 602 + EN 602 cat. resp. D. Flame retardant and self-extinguishing acc. to IE 602-1-2 and EN 602-1-2 orrosivity: in compliance with IE 60754-2 and EN 50267-2-2 + VDE 0482 part 267-2-2 - Smoke density: acc. to IE 6104 + EN 6104 good 0 16 AWG ( 27-29/0) 1.50 mm 2 6812015 0.445 11. 68120415 4 0.472 12.0 68120715 7 0.54 1.8 14 AWG ( 46/0) 2.50 mm 2 6812025 0.496 12.6 68120425 4 0.51 1.5 68120525 5 0.591 15.0 68120725 7 0.68 16.2 12 AWG ( 52/28) 4.00 mm 2 68120440 4 0.642 16. 68120740 7 0.709 18.0 16 152 210 17 200 251 294 05 96 10 AWG ( 78/28) 6.00 mm 2 6812060 0.594 15.1 68120460 4 0.657 16.7 68120760 7 0.78 19.9 8 AWG ( 77/26) 10.00 mm 2 6812070 0.764 19.4 68120470 4 0.827 21.0 68120570 5 0.898 22.8 68120770 7 0.988 25.1 286 47 522 41 501 616 775 6 AWG ( 122/26) 16.00 mm 2 6812080 0.882 22.4 556 68120480 4 0.972 24.7 709 68120580 5 1.06 27.0 868 68120780 7 1.169 29.7 1116 4 AWG ( 190/26) 25.00 mm 2 6812090 1.051 26.7 798 68120490 4 1.157 29.4 1015 68120590 5 1.272 2. 1251 E-mail: info@sab.com Web site: www.sab.com
HALOGEN-FREE ABLES D 05 FRN Flexible data with improved fire performance and extended temperature range BRÖSES D-VIERSEN XD 05 FRN 2 x Marking for XD 05 FRN 605250: A BRÖSES D-VIERSEN XD 05 FRN 2 x 0.5 mm 2 A D 05 FRN is a, flexible, flame retardant, multi-conductor data designed for use in communication technologies. In case of a fire, no corrosive gases are produced. This is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire. onductor: bare copper strands with reference to DIN VDE 0812 A olor code: with reference to DIN 47100 A gray easy stripping low capacitance flexible Peak operating voltage: Testing voltage: fixed installation: free movement: static: flexing: < 24 AWG = max. 50 V > 24 AWG = max. 500 V < 24 AWG = 800 V > 24 AWG = 1200 V 05 x O.D. 10 x O.D. -40/+85-0/+85 Zero halogen: acc. to DIN VDE 0472 part 815 and IE 60754-1 Burning characteristics: acc. to IE 602 + EN 602 cat. resp. D. Flame retardant and self-extinguishing acc. to IE 602-1-2 and EN 602-1-2 orrosivity: in compliance with IE 60754-2 and EN 50267-2-2 + VDE 0482 part 267-2-2 - Smoke density: acc. to IE 6104 + EN 6104 good 26 AWG ( 18/8) 0.14 mm 2 6050214 2 0.10. 605014 0.18.5 6050414 4 0.146.7 6050514 5 0.154.9 6050714 7 0.169 4. 6050814 8 0.205 5.2 6051214 12 0.217 5.5 6051414 14 0.224 5.7 6051614 16 0.244 6.2 6051814 18 0.256 6.5 6052114 21 0.280 7.1 6052414 24 0.295 7.5 6052714 27 0.19 8.1 605014 0 0.27 8. 605214 2 0.9 8.6 605614 6 0.50 8.9 6054014 40 0.74 9.5 6054414 44 0.90 9.9 6055014 50 0.406 10. 6056114 61 0.429 10.9 11 12 1 15 19 24 28 2 7 41 48 54 61 65 69 76 8 89 95 111 24 AWG ( 14/4) 0.25 mm 2 6050225 2 0.142.6 605025 0.150.8 6050425 4 0.161 4.1 6050525 5 0.17 4.4 6050725 7 0.189 4.8 6050825 8 0.21 5.4 6051225 12 0.248 6. 6051425 14 0.260 6.6 6051625 16 0.272 6.9 6051825 18 0.287 7. 6052125 21 0.27 8. 6052425 24 0.1 8.4 6052725 27 0.9 8.6 605025 0 0.50 8.9 605225 2 0.62 9.2 605625 6 0.94 10.0 6054025 40 0.417 10.6 6054425 44 0.47 11.1 6055025 50 0.457 11.6 6056125 61 0.484 12. 1 15 17 21 26 0 41 46 52 57 71 74 77 84 89 105 116 124 17 162 22 AWG ( 7/0) 0.4 mm 2 605024 2 0.165 4.2 60504 0.17 4.4 605044 4 0.181 4.6 605054 5 0.205 5.2 605074 7 0.224 5.7 605084 8 0.264 6.7 605124 12 0.295 7.5 605144 14 0.27 8. 605164 16 0.4 8.7 605184 18 0.62 9.2 605214 21 0.94 10.0 605244 24 0.417 10.6 605274 27 0.425 10.8 60504 0 0.441 11.2 60524 2 0.457 11.6 60564 6 0.476 12.1 605404 40 0.508 12.9 605444 44 0.51 1.5 605504 50 0.571 14.5 605614 61 0.606 15.4 17 20 24 29 6 44 57 70 78 86 98 106 116 126 14 148 164 175 204 241 ontinued on next page 1 E-mail: info@sab.com Web site: www.sab.com
HALOGEN-FREE ABLES D 05 FRN Flexible data with improved fire performance and extended temperature range S D-VIERSEN XD 05 FRN 2 x 0.5 mm 2 Marking for XD 05 FRN 605250: A BRÖSES D-VIERSEN XD 05 FRN 2 x 0.5 mm 2 A D 05 FRN is a, flexible, flame retardant multi-conductor data designed for use in communication technologies. In case of a fire, no corrosive gases are produced. This is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire. onductor: bare copper strands with reference to DIN VDE 0812 A olor code: with reference to DIN 47100 A gray easy stripping low capacitance flexible Peak operating voltage: < 24 AWG = max. 50 V > 24 AWG = max. 500 V Testing voltage: < 24 AWG = 800 V > 24 AWG = 1200 V fixed installation: 05 x O.D. free movement: 10 x O.D. static: -40/+85 flexing: -0/+85 Zero halogen: acc. to DIN VDE 0472 part 815 and IE 60754-1 Burning characteristics: acc. to IE 602 + EN 602 cat. resp. D. Flame retardant and self-extinguishing acc. to IE 602-1-2 and EN 602-1-2 orrosivity: in compliance with IE 60754-2 and EN 50267-2-2 + VDE 0482 part 267-2-2 - Smoke density: acc. to IE 6104 + EN 6104 good 2 20 AWG ( 16/2) 0.50 mm 2 6050250 2 0.177 4.5 605050 0.185 4.7 6050450 4 0.201 5.1 6050550 5 0.220 5.6 6050750 7 0.248 6. 6050850 8 0.287 7. 6051250 12 0.5 8.5 6051450 14 0.50 8.9 6051650 16 0.70 9.4 6051850 18 0.90 9.9 6052150 21 0.429 10.9 6052450 24 0.45 11.5 6052750 27 0.461 11.7 605050 0 0.476 12.1 605250 2 0.496 12.6 605650 6 0.516 1.1 6054450 44 0.594 15.1 6055050 50 0.618 15.7 6056150 61 0.657 16.7 21 24 29 4 45 55 76 85 95 106 121 11 14 156 167 184 229 276 01 19 AWG ( 2/2) 0.75 mm 2 6050275 2 0.201 5.1 605075 0.21 5.4 6050475 4 0.240 6.1 6050575 5 0.260 6.6 6050775 7 0.28 7.2 6050875 8 0.4 8.7 6051275 12 0.86 9.8 6051475 14 0.406 10. 6051675 16 0.425 10.8 6051875 18 0.449 11.4 6052175 21 0.492 12.5 6052475 24 0.524 1. 6052775 27 0.55 1.6 605075 0 0.571 14.5 605275 2 0.591 15.0 605675 6 0.614 15.6 6054075 40 0.657 16.7 6054475 44 0.689 17.5 6055075 50 0.720 18. 6056175 61 0.780 19.8 28 42 49 61 80 10 114 129 14 167 181 200 228 242 268 298 19 56 45 18 AWG ( 0/2) 1.00 mm 2 6050280 2 0.209 5. 605080 0.220 5.6 6050480 4 0.248 6. 6050580 5 0.272 6.9 6050680 6 0.295 7.5 6050780 7 0.11 7.9 16 AWG ( 27-29/0) 1.50 mm 2 6050285 2 0.240 6.1 605085 0.252 6.4 6050485 4 0.276 7.0 6050585 5 0.19 8.1 6050685 6 0.46 8.8 6050785 7 0.46 8.8 2 8 48 58 67 78 4 52 6 82 95 10 E-mail: info@sab.com Web site: www.sab.com
HALOGEN-FREE ABLES D 15 FRN Flexible data with improved fire performance, overall tinned copper screen and extended temperature range BRÖSES D-VIERSEN XD 15 FRN 7 Marking for XD 15 FRN 6150750: A BRÖSES D-VIERSEN XD 15 FRN 7 x 0.5 mm 2 A D 15 FRN is a, flexible, flame retardant, tinned copper shielded, multi-conductor data designed for use in electronics of data processing systems, weighing installations and office appliances. In case of a fire, no corrosive gases are produced. This is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire. onductor: bare copper strands with reference to DIN VDE 0812 A olor code: with reference to DIN 47100 Wrapping: Screen: PETP foil tinned copper braiding A gray good EM characteristics* * opper braiding should be connected circularly to optimize * the EM characteristics Peak operating voltage: Testing voltage: fixed installation: free movement: static: flexing: < 24 AWG = max. 50 V > 24 AWG = max. 500 V < 24 AWG = 800 V > 24 AWG = 1200 V 05 x O.D. 10 x O.D. -40/+85-0/+85 Zero halogen: acc. to DIN VDE 0472 part 815 and IE 60754-1 Burning characteristics: acc. to IE 602 + EN 602 cat. resp. D. Flame retardant and self-extinguishing acc. to IE 602-1-2 and EN 602-1-2. orrosivity: in compliance with IE 60754-2 and EN 50267-2-2 + VDE 0482 part 267-2-2 - Smoke density: acc. to IE 6104 + EN 6104 good 26 AWG ( 18/8) 0.14 mm 2 6150214 2 0.150.8 615014 0.157 4.0 6150414 4 0.165 4.2 6150514 5 0.177 4.5 6150714 7 0.189 4.8 6150814 8 0.220 5.6 6151014 10 0.26 6.0 6151214 12 0.260 6.6 6151414 14 0.268 6.8 6151614 16 0.280 7.1 6151814 18 0.291 7.4 6152114 21 0.15 8.0 6152414 24 0.15 8.0 6152714 27 0.9 8.6 615014 0 0.46 8.8 615214 2 0.58 9.1 615614 6 0.70 9.4 6154014 40 0.94 10.0 6154414 44 0.417 10.6 6155014 50 0.4 11.0 6155214 52 0.4 11.0 6156114 61 0.457 11.6 15 17 18 22 26 1 4 4 46 51 55 56 60 70 75 79 86 95 109 118 120 16 24 AWG ( 14/4) 0.25 mm 2 6150225 2 0.161 4.1 615025 0.169 4. 6150425 4 0.181 4.6 6150525 5 0.201 5.1 6150725 7 0.217 5.5 6150825 8 0.256 6.5 6151025 10 0.276 7.0 6151225 12 0.28 7.2 6151425 14 0.295 7.5 6151625 16 0.07 7.8 6151825 18 0.2 8.2 6152125 21 0.46 8.8 6152425 24 0.66 9. 6152725 27 0.74 9.5 615025 0 0.86 9.8 615225 2 0.98 10.1 615625 6 0.421 10.7 6154025 40 0.445 11. 6154425 44 0.465 11.8 6155025 50 0.500 12.7 6155225 52 0.500 12.7 6156125 61 0.528 1.4 17 19 22 29 4 44 50 54 60 66 7 82 87 95 102 108 127 140 149 171 175 198 22 AWG ( 7/0) 0.4 mm 2 615024 2 0.185 4.7 2 61504 0.201 5.1 28 615044 4 0.217 5.5 2 615054 5 0.22 5.9 7 615074 7 0.268 6.8 49 615084 8 0.299 7.6 58 615104 10 0.2 8.2 65 615124 12 0.1 8.4 72 615144 14 0.46 8.8 79 615164 16 0.62 9.2 87 615184 18 0.82 9.7 97 615214 21 0.421 10.7 119 615244 24 0.445 11. 10 615274 27 0.45 11.5 19 61504 0 0.469 11.9 149 61524 2 0.500 12.7 166 61564 6 0.520 1.2 18 615404 40 0.551 14.0 202 615444 44 0.575 14.6 214 615504 50 0.622 15.8 259 615524 52 0.622 15.8 265 615614 61 0.657 16.7 246 ontinued on next page E-mail: info@sab.com Web site: www.sab.com
HALOGEN-FREE ABLES D 15 FRN Flexible data with improved fire performance,overall tinned copper screen and extended temperature range D-VIERSEN XD 15 FRN 7 x 0.5 mm 2 Marking for XD 15 FRN 6150750: A BRÖSES D-VIERSEN XD 15 FRN 7 x 0.5 mm 2 A D 15 FRN is a, flexible, flame retardant, tinned copper shielded, multi-conductor data designed for use in electronics of data processing systems, weighing installations and office appliances. In case of a fire, no corrosive gases are produced. This is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire. onductor: bare copper strands with reference to DIN VDE 0812 A olor code: with reference to DIN 47100 Wrapping: PETP foil Screen: tinned copper braiding A gray good EM characteristics* * opper braiding should be connected circularly to optimize * the EM characteristics Peak operating voltage: < 24 AWG = max. 50 V > 24 AWG = max. 500 V Testing voltage: < 24 AWG = 800 V > 24 AWG = 1200 V fixed installation: 05 x O.D. free movement: 10 x O.D. static: -40/+85 flexing: -0/+85 Zero halogen: acc. to DIN VDE 0472 part 815 and IE 60754-1 Burning characteristics: acc. to IE 602 + EN 602 cat. resp. D. Flame retardant and self-extinguishing acc. to IE 602-1-2 and EN 602-1-2. orrosivity: in compliance with IE 60754-2 and EN 50267-2-2 + VDE 0482 part 267-2-2 - Smoke density: acc. to IE 6104 + EN 6104 good 4 20 AWG ( 16/2) 0.50 mm 2 6150250 2 0.205 5.2 615050 0.21 5.4 6150450 4 0.228 5.8 6150550 5 0.264 6.7 6150750 7 0.28 7.2 6150850 8 0.2 8.2 6151050 10 0.46 8.8 6151250 12 0.54 9.0 6151450 14 0.70 9.4 6151650 16 0.90 9.9 6151850 18 0.417 10.6 6152150 21 0.457 11.6 6152450 24 0.496 12.6 6152750 27 0.504 12.8 615050 0 0.520 1.2 615250 2 0.59 1.7 615650 6 0.559 14.2 6154450 44 0.646 16.4 6155050 50 0.669 17.0 6156150 61 0.709 18.0 28 1 6 48 57 69 76 85 9 105 124 148 162 175 190 201 222 284 15 6 19 AWG ( 2/2) 0.75 mm 2 6150275 2 0.228 5.8 615075 0.256 6.5 6150475 4 0.276 7.0 6150575 5 0.295 7.5 6150775 7 0.19 8.1 6150875 8 0.62 9.2 6151275 12 0.41 10.5 6151475 14 0.4 11.0 6151675 16 0.45 11.5 6151875 18 0.488 12.4 6152175 21 0.55 1.6 6152475 24 0.567 14.4 6152775 27 0.579 14.7 615075 0 0.622 15.8 615275 2 0.642 16. 615675 6 0.665 16.9 4 44 52 60 75 89 120 1 151 17 200 218 27 280 296 22 18 AWG ( 0/2) 1.00 mm 2 6150280 2 0.26 6.0 615080 0.264 6.7 6150480 4 0.28 7.2 6150580 5 0.07 7.8 6150680 6 0.1 8.4 6150780 7 0.1 8.4 18 AWG ( 0/2) 1.50 mm 2 6150285 2 0.276 7.0 615085 0.287 7. 6150485 4 0.11 7.9 6150585 5 0.9 8.6 6150685 6 0.66 9. 6150785 7 0.66 9. 7 49 58 69 80 85 52 60 7 87 102 109 E-mail: info@sab.com Web site: www.sab.com
HALOGEN-FREE ABLES Paired data with improved D 45 FRN TP fire performance, overall tinned copper screen and extended temperature range D-VIERSEN XD 45 FRN TP x 2 x 0.25 m Marking for XD 45 FRN TP 645025: A BRÖSES D-VIERSEN XD 45 FRN TP x 2 x 0.25 mm 2 A D 45 FRN TP is a, flexible, flame retardant, tinned copper shielded, multi-conductor data designed for use in electronics of data processing systems, weighing installations and office appliances, for increased requirements on transmission characteristics and near-end cross talk attenuation. In case of a fire, no corrosive gases are produced. This is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire. onductor: bare copper strands with reference to DIN VDE 0812 A olor code: with reference to DIN 47100 Wrapping: Screen: pairwise, pairs PETP foil tinned copper braiding A gray good EM characteristics* good transmission rates and crosstalk attenuation * opper braiding should be connected circularly to optimize * the EM characteristics Peak operating voltage: Testing voltage: fixed installation: free movement: static: flexing: < 24 AWG = max. 50 V > 24 AWG = max. 500 V < 24 AWG = 800 V > 24 AWG = 1200 V 05 x O.D. 10 x O.D. -40/+85-0/+85 Zero halogen: acc. to DIN VDE 0472 part 815 and IE 60754-1 Burning characteristics: acc. to IE 602 + EN 602 cat. resp. D. Flame retardant and self-extinguishing acc. to IE 602-1-2 and EN 602-1-2. orrosivity: in compliance with IE 60754-2 and EN 50267-2-2 + VDE 0482 part 267-2-2 - Smoke density: acc. to IE 6104 + EN 6104 good pairs pairs pairs 26 AWG ( 18/8) 0.14 mm 2 6450214 2 0.21 5.4 645014 0.22 5.9 6450414 4 0.272 6.9 6450514 5 0.291 7.4 6450614 6 0.299 7.6 6450814 8 0.2 8.2 6451014 10 0.50 8.9 6451214 12 0.82 9.7 6451614 16 0.41 10.5 6451814 18 0.47 11.1 6452414 24 0.504 12.8 24 AWG ( 14/4) 0.25 mm 2 6450225 2 0.22 5.9 645025 0.268 6.8 6450425 4 0.299 7.6 6450525 5 0.19 8.1 6450625 6 0.27 8. 6450825 8 0.54 9.0 6451025 10 0.86 9.8 6451225 12 0.429 10.9 6451625 16 0.469 11.9 6451825 18 0.500 12.7 6452425 24 0.559 14.2 27 2 42 47 50 58 67 77 94 112 142 2 44 49 59 6 76 88 111 16 157 190 22 AWG ( 7/0) 0.4 mm 2 645024 2 0.28 7.2 64504 0.07 7.8 645044 4 0.46 8.8 645054 5 0.74 9.5 645064 6 0.82 9.7 645084 8 0.417 10.6 645124 12 0.528 1.4 645164 16 0.575 14.6 645184 18 0.594 15.1 645244 24 0.69 17.6 20 AWG ( 16/2) 0.50 mm 2 6450250 2 0.299 7.6 645050 0.27 8. 6450450 4 0.70 9.4 6450550 5 0.402 10.2 6450650 6 0.409 10.4 6450850 8 0.449 11.4 6451050 10 0.520 1.2 6451250 12 0.567 14.4 6451650 16 0.642 16. 6451850 18 0.665 16.9 6452450 24 0.748 19.0 46 56 65 77 88 105 151 194 21 27 52 6 78 87 10 124 156 189 244 26 28 19 AWG ( 2/2) 0.75 mm 2 6450275 2 0.5 8.5 66 645075 0.70 9.4 82 6450475 4 0.429 10.9 107 6450575 5 0.461 11.7 122 6450675 6 0.492 12.5 144 6450875 8 0.59 1.7 202 6451275 12 0.67 17.1 26 6451675 16 0.72 18.6 18 6451875 18 0.760 19. 49 6452475 24 0.858 21.8 4 5 E-mail: info@sab.com Web site: www.sab.com
onstruction with reference to EN 5006 HALOGEN-FREE ABLES A 871 TWÖ Thin-wall connection and data lassification of smoke density acc. to NF F 16-101 ÖSES D-VIERSEN XA 871 TWÖ 18 x 0.75 mm 2 Marking for XA 871 TWÖ 68711807: A BRÖSES D-VIERSEN XA 871 TWÖ 18 x 0.75 mm 2 A A 871 TWÖ is a very flexible connection and data. The is designed for use in transportation vehicles and locomotives. The thinwall outer jacket guarantees easier installation. In case of fire, no corrosive gases are produced. This is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire. onductor: Insulation : olor code: tinned copper strands fine wires acc. to. EN 5006-2 white with black numbers acc. to. EN 504 black very flexible oil resistant classification of smoke density acc. to NF F 16-101 thin-walled easy installation Nominal voltage: Uo/U 00/500 V Testing voltage: 2000 V fixed laying: 5 x O. D. flexible application: 10 x O. D. fixed laying: -40/+105 flexible application: -25/+105 Zero halogen: acc. to DIN VDE 0472 part 815 and IE 60754-1 Burning characteristics: No flame propagation acc. to IE 602 + EN 602 resp. EN 5005. Flame retardant and self-extinguishing acc. to IE 602-1-2 + EN 602-1-2 orrosivity: in compliance with IE 60754-2 and EN 50267-2-2 + VDE 0482 part 267-2-2 - Smoke density: acc. to IE 6104 + EN 6104 + index of smoke density acc. to NF F 16-101 Ozone resistance: acc. to VDE 0282 part 2 very good 6 19 AWG 0.75 mm 2 68710207 2 0.185 4.7 68710407 4 0.209 5. 68711007 10 0.1 8.4 68711807 18 0.402 10.2 18 AWG 1.00 mm 2 68710210 2 0.197 5.0 6871010 0.205 5.2 68710410 4 0.224 5.7 68711010 10 0.54 9.0 68712510 25 0.504 12.8 24 4 78 10 28 4 41 94 207 16 AWG 1.50 mm 2 68710515 5 0.295 7.5 76 68710715 7 0.2 8.2 99 14 AWG 2.50 mm 2 6871025 0.28 7.2 72 Especially for use in rail vehicles E-mail: info@sab.com Web site: www.sab.com
onstruction with reference to EN 5006 HALOGEN-FREE ABLES A 872 TWÖ Thin-wall data with overall tinned copper screen lassification of smoke density acc. to NF F 16-101 D-VIERSEN XA 872 TWÖ 6 x 1.0 mm 2 Marking for XA 872 TWÖ 68720610: A BRÖSES D-VIERSEN XA 872 TWÖ 6 x 1.0 mm 2 A A 872 TWÖ is a very flexible tinned copper shielded data. The is designed for use in transportation vehicles and locomotives. The thin-wall outer jacket guarantees easier installation. An overall tinned copper braid is recommended whenever electrical interference distorts signal transmission, or when EMI emissions need to be suppressed. In case of fire, no corrosive gases are produced. This is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire. onductor: Insulation : olor code: Wrapping: Screen: tinned copper strands fine wires acc. to. EN 5006-2 white with black numbers acc. to. EN 504 PETP foil tinned copper braiding black very flexible good EM characteristics* oil resistant classification of smoke density acc. to NF F 16-101 thin-walled easier installation * opper braiding should be connected circularly to optimize * the EM characteristics Nominal voltage: Testing voltage: Uo/U 00/500 V 2000 V fixed laying: 05 x O. D. flexible application: 10 x O. D. fixed laying: flexible application: -40/+105-25/+105 Zero halogen: acc. to DIN VDE 0472 part 815 and IE 60754-1 Burning characteristics: No flame propagation acc. to IE 602 + EN 602 resp. EN 5005. Flame retardant and self-extinguishing acc. to IE 602-1-2 + EN 602-1-2 orrosivity: in compliance with IE 60754-2 and EN 50267-2-2 + VDE 0482 part 267-2-2 - Smoke density: acc. to IE 6104 + EN 6104 + index of smoke density acc. to NF F 16-101 Ozone resistance: acc. to VDE 0282 part 2 very good 20 AWG 0.50 mm 2 68720205 2 0.189 ± 0.020 4.8 ± 0.5 68720405 4 0.21 ± 0.020 5.4 ± 0.5 68720805 8 0.291 ± 0.020 7.4 ± 0.5 68721005 10 0.15 ± 0.020 8.0 ± 0.5 68721205 12 0.2 ± 0.020 8.2 ± 0.5 68721605 16 0.54 ± 0.020 9.0 ± 0.5 2 2 56 68 76 94 19 AWG 0.75 mm 2 68720207 2 0.205 ± 0.020 5.2 ± 0.5 68720407 4 0.228 ± 0.020 5.8 ± 0.5 68720607 6 0.268 ± 0.020 6.8 ± 0.5 68720807 8 0.19 ± 0.020 8.1 ± 0.5 68721007 10 0.46 ± 0.020 8.8 ± 0.5 68721207 12 0.54 ± 0.020 9.0 ± 0.5 68721407 14 0.70 ± 0.020 9.4 ± 0.5 68721607 16 0.90 ± 0.020 9.9 ± 0.5 68721807 18 0.409 ± 0.020 10.4 ± 0.5 28 41 56 75 88 99 112 126 18 18 AWG 1.00 mm 2 68720210 2 0.217 ± 0.020 5.5 ± 0.5 68720410 4 0.244 ± 0.020 6.2 ± 0.5 68720610 6 0.287 ± 0.020 7. ± 0.5 68720710 7 0.287 ± 0.020 7. ± 0.5 68720810 8 0.9 ± 0.020 8.6 ± 0.5 68721010 10 0.70 ± 0.020 9.4 ± 0.5 16 AWG 1.50 mm 2 68720215 2 0.240 ± 0.020 6.1 ± 0.5 68720415 4 0.276 ± 0.020 7.0 ± 0.5 68720715 7 0.9 ± 0.020 8.6 ± 0.5 68720815 8 0.86 ± 0.020 9.8 ± 0.5 2 48 69 7 87 104 42 67 108 124 7 Especially for use in rail vehicles E-mail: info@sab.com Web site: www.sab.com
onstruction with reference to EN 5006 HALOGEN-FREE ABLES Paired Thin-wall connection and data A 876 TWÖ TP with overall tinned copper screen lassification of smoke density acc. to NF F 16-101 IERSEN XA 876 TWÖ TP x 2 x 0.75 mm 2 Marking for XA 876 TWÖ TP 6876007: A BRÖSES D-VIERSEN XA 876 TWÖ TP x 2 x 0.75 mm 2 A A 876 TWÖ TP is a very flexible tinned copper shielded data, consisting of twisted pairs. The is designed for use in transportation vehicles and locomotives. The thin-wall outer jacket guarantees easier installation. An overall tinned copper braid is recommended whenever electrical interference distorts signal transmission, or when EMI emissions need to be suppressed. In case of fire, no corrosive gases are produced. This is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire. onductor: Insulation : olor code: Wrapping: Screen: tinned copper strands fine wires acc. to. EN 5006-2 white with black numbers acc. to. EN 504 pairwise, pairs PETP foil tinned copper braiding black very flexible good EM characteristics* oil resistant classification of smoke density acc. to NF F 16-101 thin-walled easier installation * opper braiding should be connected circularly to optimize * the EM characteristics Nominal voltage: Uo/U 00/500 V Testing voltage: 2000 V fixed laying: 05 x O. D. flexible application: 10 x O. D. fixed laying: -40/+105 flexible application: -25/+105 Zero halogen: acc. to DIN VDE 0472 part 815 and IE 60754-1 Burning characteristics: No flame propagation acc. to IE 602 + EN 602 resp. EN 5005. Flame retardant and self-extinguishing acc. to IE 602-1-2 + EN 602-1-2 orrosivity: in compliance with IE 60754-2 and EN 50267-2-2 + VDE 0482 part 267-2-2 - Smoke density: acc. to IE 6104 + EN 6104 + index of smoke density acc. to NF F 16-101 Ozone resistance: acc. to VDE 0282 part 2 very good 8 pairs 20 AWG 0.50 mm 2 6876005 0.291 7.4 50 68760405 4 0.1 8.4 62 19 AWG 0.75 mm 2 68760207 2 0.280 7.1 49 6876007 0.19 8.1 64 Especially for use in rail vehicles E-mail: info@sab.com Web site: www.sab.com
HALOGEN-FREE ABLES R 600 FRN S Rail ontrol with numbered DIN EN 45545-2 edition 201 BRÖSES D-VIERSEN X R 600 FRN 12 x 1.5 mm Marking for XR 600 FRN 66001215: A BRÖSES D-VIERSEN X R 600 FRN 12 G 1.5 mm 2 Our specially developed for rail vehicles control A R 600 FRN with suitable external materials tested according to DIN EN 45545-2 are particularly suited for flexible installation in rail vehicles. For these s, the stringent requirements have been confirmed in accordance with DIN EN 45545-2. onductor: bare copper strands acc. to IE 60228, EN 60228, VDE 0295, class 5 olor code: black with consecutive numbers acc. to EN 504; green-yellow earth wire from conductrors gray fulfills fire protection requirements R15 (EL1A) acc. to DIN EN 45545-2 for hazard levels HL1- Nominal voltage: Testing voltage U: Uo/U 00/500 V 000 V fixed laying: 4 x O. D. flexible application: 6 x O. D. fixed laying: flexible application: Zero halogen: -40/+90-0/+90 acc. to EN 5006-1 + EN 50264-1 are fulfilled. Development of Hl is < 0.5% acc. to DIN EN 50267-2-1. ph-value is > 4. acc. to DIN EN 50267-2-2. onductivity is < 10.0 µs/mm acc. to DIN EN 50267-2-2. Fluoric content < 0.1% acc. to DIN EN 60684-2. Burning characteristics: No flame propagation acc. to DIN EN 602--24, DIN EN 602--25 and DIN EN 5005 section 9.1.2. Flame retardant and self-extinguishing acc. to DIN EN 602-1-2. Toxicity: acc. to DIN EN 5005 Smoke density: acc. to DIN EN 6104 good Tested at reference types. 20 AWG ( 16/2) 0.50 mm 2 66000205 2 0.189 4.8 6600005 0.201 5.1 66000405 4 0.217 5.5 66000505 5 0.244 6.2 66000705 7 0.264 6.7 66001005 10 0.9 8.6 66001205 12 0.58 9.1 66001805 18 0.421 10.7 66002505 25 0.508 12.9 6600205 2 0.551 14.0 66004205 42 0.618 15.7 66006105 61 0.728 18.5 22 26 1 8 46 65 74 114 149 19 245 4 19 AWG ( 2/2) 0.75 mm 2 66000207 2 0.21 5.4 6600007 0.224 5.7 66000407 4 0.252 6.4 66000507 5 0.276 7.0 66000707 7 0.07 7.8 66001007 10 0.94 10.0 66001207 12 0.41 10.5 66001807 18 0.488 12.4 66002507 25 0.594 15.1 6600207 2 0.646 16.4 66004207 42 0.724 18.4 66006107 61 0.850 21.6 0 4 42 52 65 97 110 155 212 261 46 485 18 AWG ( 0/2) 1.00 mm 2 66000210 2 0.220 5.6 4 6600010 0.240 6.1 42 66000410 4 0.260 6.6 51 66000510 5 0.295 7.5 6 66000710 7 0.19 8.1 79 66001010 10 0.417 10.6 116 66001210 12 0.429 10.9 12 66001810 18 0.508 12.9 188 66002510 25 0.618 15.7 256 6600210 2 0.67 17.1 27 66004210 42 0.764 19.4 414 66006110 61 0.894 22.7 587 ontinued on next page 9 Especially for use in rail vehicles E-mail: info@sab.com Web site: www.sab.com
DIN EN 45545-2 edition 201 HALOGEN-FREE ABLES R 600 FRN S Rail ontrol with numbered SES D-VIERSEN X R 600 FRN 12 x 1.5 mm 2 Marking for XR 600 FRN 66001215: A BRÖSES D-VIERSEN X R 600 FRN 12 G 1.5 mm 2 Our specially developed for rail vehicles control A R 600 FRN with suitable external materials tested according to DIN EN 45545-2 are particularly suited for flexible installation in rail vehicles. For these s, the stringent requirements have been confirmed in accordance with DIN EN 45545-2. onductor: bare copper strands acc. to IE 60228, EN 60228, VDE 0295, class 5 olor code: black with consecutive numbers acc. to EN 504; green-yellow earth wire from conductrors gray fulfills fire protection requirements R15 (EL1A) acc. to DIN EN 45545-2 for hazard levels HL1- Nominal voltage: Uo/U 00/500 V Testing voltage U: 000 V fixed laying: 4 x O. D. flexible application: 6 x O. D. fixed laying: -40/+90 flexible application: -0/+90 Zero halogen: acc. to EN 5006-1 + EN 50264-1 are fulfilled. Development of Hl is < 0.5% acc. to DIN EN 50267-2-1. ph-value is > 4. acc. to DIN EN 50267-2-2. onductivity is < 10.0 µs/mm acc. to DIN EN 50267-2-2. Fluoric content < 0.1% acc. to DIN EN 60684-2. Burning characteristics: No flame propagation acc. to DIN EN 602--24, DIN EN 602--25 and DIN EN 5005 section 9.1.2. Flame retardant and self-extinguishing acc. to DIN EN 602-1-2. Toxicity: acc. to DIN EN 5005 Smoke density: acc. to DIN EN 6104 good Tested at reference types. 40 16 AWG ( 27-29/0) 1.50 mm 2 66000215 2 0.252 6.4 6600015 0.268 6.8 66000415 4 0.299 7.6 66000515 5 0.27 8. 66000715 7 0.62 9.2 66001015 10 0.472 12.0 66001215 12 0.488 12.4 66001815 18 0.58 14.8 66002515 25 0.709 18.0 6600215 2 0.768 19.5 66004215 42 0.866 22.0 66006115 61 1.016 25.8 14 AWG ( 46/0) 2.50 mm 2 66000225 2 0.07 7.8 6600025 0.50 8.9 66000425 4 0.62 9.2 66000525 5 0.98 10.1 66000725 7 0.441 11.2 66001025 10 0.58 14.8 66001225 12 0.602 15. 66001825 18 0.717 18.2 66002525 25 0.878 22. 46 54 67 8 114 154 177 194 61 444 58 818 71 85 104 14 169 24 280 41 562 12 AWG ( 52/28) 4.00 mm 2 6600040 0.82 9.7 66000440 4 0.425 10.8 66000540 5 0.476 12.1 66000740 7 0.528 1.4 10 AWG ( 78/28) 6.00 mm 2 6600060 0.449 11.4 66000460 4 0.500 12.7 66000560 5 0.559 14.2 66000760 7 0.618 15.7 8 AWG ( 77/26) 10.00 mm 2 66000461 4 0.657 16.7 66000561 5 0.72 18.6 66000761 7 0.815 20.7 124 157 195 252 181 226 279 66 89 497 654 6 AWG ( 122/26) 16.00 mm 2 66000462 4 0.811 20.6 596 66000562 5 0.906 2.0 74 66000762 7 1.004 25.5 971 4 AWG ( 190/26) 25.00 mm 2 6600046 4 0.980 24.9 9 6600056 5 1.106 28.1 1176 2 AWG ( 272/26) 5.00 mm 2 66000464 4 1.14 28.8 1295 66000564 5 1.280 2.5 1622 Especially for use in rail vehicles E-mail: info@sab.com Web site: www.sab.com
HALOGEN-FREE ABLES S Rail ontrol with numbered R 68 FRN and overall tinned copper screen DIN EN 45545-2 edition 201 Especially for use in rail vehicles D-VIERSEN XR 68 FRN 5 x 1.5 mm 2 Marking for XR 68 FRN 6680515: A BRÖSES D-VIERSEN XR 68 FRN 5 G 1.5 mm 2 Our specially developed A R 68 FRN with overall tinned copper screen and suitable external materials tested according to DIN EN 45545-2 are particularly suited for flexible installation in rail vehicles. For these s, the stringent requirements have been confirmed in accordance with DIN EN 45545-2. onductor: bare copper strands acc. to IE 60228, EN 60228, VDE 0295, class 5 olor code: Wrapping: Screen: black with consecutive numbers acc. to EN 504; green-yellow earth wire from conductrors PETP foil tinned copper braiding gray good EM characteristics** fulfills fire protection requirements R15 (EL1A) acc. to DIN EN 45545-2 for hazard levels HL1- ** opper braiding should be connected circularly to optimize ** the EM characteristics Nominal voltage: Testing voltage U: Uo/U 00/500 V fixed laying: 5 x O. D. flexible application: 10 x O. D. fixed laying: flexible application: Zero halogen: 000 V conductor/screen 2000 V -40/+90-0/+90 acc. to EN 5006-1 + EN 50264-1 are fulfilled. Development of Hl is < 0.5% acc. to DIN EN 50267-2-1. ph-value is > 4. acc. to DIN EN 50267-2-2. onductivity is < 10.0 µs/mm acc. to DIN EN 50267-2-2. Fluoric content < 0.1% acc. to DIN EN 60684-2. Burning characteristics: No flame propagation acc. to DIN EN 602--24, DIN EN 602--25 and DIN EN 5005 section 9.1.2. Flame retardant and self-extinguishing acc. to DIN EN 602-1-2. Toxicity: acc. to DIN EN 5005 Smoke density: acc. to DIN EN 6104 good Tested at reference types. 20 AWG ( 16/2) 0.50 mm 2 6680205 2 0.209 5. 668005 0.220 5.6 6680405 4 0.244 6.0 6680505 5 0.264 6.7 6680705 7 0.28 7.2 6681205 12 0.78 9.6 6681805 18 0.449 11.4 6682505 25 0.54 1.8 26 0 41 47 54 101 18 18 18 AWG ( 0/2) 1.00 mm 2 6680210 2 0.248 6. 668010 0.260 6.6 6680410 4 0.280 7.1 6680510 5 0.15 8.0 6680710 7 0.9 8.6 6681210 12 0.465 11.8 6681810 18 0.54 1.8 6682510 25 0.661 16.8 56 68 94 110 18 226 15 454 14 AWG ( 46/0) 2.50 mm 2 6680225 2 0.27 8. 668025 0.54 9.0 6680425 4 0.82 9.7 6680525 5 0.4 11.0 6680725 7 0.476 12.1 6681225 12 0.646 16.4 6681825 18 0.760 19. 6682525 25 0.921 2.4 100 128 16 215 276 466 666 91 41 19 AWG ( 2/2) 0.75 mm 2 6680207 2 0.240 6.1 668007 0.252 6.4 6680407 4 0.272 6.9 6680507 5 0.0 7.7 6680707 7 0.27 8. 6681207 12 0.441 11.2 6681807 18 0.524 1. 6682507 25 0.68 16.2 4 41 49 65 81 10 188 265 16 AWG ( 27-29/0) 1.50 mm 2 6680215 2 0.272 6.9 668015 0.28 7.2 6680415 4 0.19 8.1 6680515 5 0.54 9.0 6680715 7 0.82 9.7 6681215 12 0.547 1.9 6681815 18 0.618 15.7 6682515 25 0.752 19.1 42 60 74 91 120 202 05 412 12 AWG ( 52/28) 4.00 mm 2 6680440 4 0.45 11.5 168 6680540 5 0.504 12.8 208 10 AWG ( 78/28) 6.00 mm 2 6680460 4 0.55 1.6 27 6680560 5 0.594 15.1 282 8 AWG ( 77/26) 10.00 mm 2 6680461 4 0.701 17.8 414 6680561 5 0.862 21.9 616 E-mail: info@sab.com Web site: www.sab.com
DIN EN 45545-2 edition 201 HALOGEN-FREE ABLES R 605 FRN S Rail Data Flame retardant acc. to UN/EE R118 S D-VIERSEN XR 605 FRN 2 x 0.5 mm 2 Marking for XR 605 FRN 6605250: A BRÖSES D-VIERSEN XR 605 FRN 2 x 0.5 mm 2 With our specially developed for rail vehicles data with colored A R 605 FRN, we offer our customers maximum planning certainty and comfort for flexible installation in railway vehicles. In addition to high flexibility, these s meet the highest safety standards for the railway industry. For these s, the stringent requirements have been confirmed in accordance with DIN EN 45545-2. onductor: bare copper strands with reference to IE 60228, EN 6028, VDE 0295, class 5 olor code: with reference to DIN 47100 gray fulfills fire protection requirements R15 (EL1A) acc. to DIN EN 45545-2 for hazard levels HL1- flame retardant acc. to UN/EE R118 Especially for use in rail vehicles Peak operating voltage: < 24 AWG = max. 50 V 24 AWG = max. 500 V Testing voltage: < 24 AWG = 800 V 24 AWG = 1200 V fixed laying: 5 x O. D. flexible application: 10 x O. D. fixed laying: -40/+90 flexible application: -0/+90 Zero halogen: acc. to EN 5006-1 + EN 50264-1 are fulfilled. Development of Hl is < 0.5% acc. to DIN EN 50267-2-1. ph-value is > 4. acc. to DIN EN 50267-2-2. onductivity is < 10.0 µs/mm acc. to DIN EN 50267-2-2. Fluoric content < 0.1% acc. to DIN EN 60684-2. Burning characteristics: No flame propagation acc. to DIN EN 602--24, DIN EN 602--25 and DIN EN 5005 section 9.1.2. Flame retardant and self-extinguishing acc. to DIN EN 602-1-2. Flame retardant acc. to ISO 6722 (UN/EE R118) Toxicity: acc. to DIN EN 5005 Smoke density: acc. to DIN EN 6104 good Tested at reference types. 42 26 AWG ( 18/8) 0.14 mm 2 66050214 2 0.122.1 6605014 0.10. 66050414 4 0.18.5 66050514 5 0.150.8 66050714 7 0.161 4.1 66050814 8 0.197 5.0 66051214 12 0.209 5. 66051414 14 0.217 5.5 66051614 16 0.26 6.0 66051814 18 0.248 6. 66052114 21 0.272 6.9 66052414 24 0.287 7. 66052714 27 0.0 7.7 6605014 0 0.11 7.9 6605214 2 0.2 8.2 6605614 6 0.5 8.5 66054014 40 0.58 9.1 66054414 44 0.74 9.5 66055014 50 0.406 10. 66056114 61 0.429 10.9 9 10 12 14 17 22 26 28 4 8 44 47 54 58 62 68 75 80 95 111 24 AWG ( 14/4) 0.25 mm 2 66050225 2 0.14.4 6605025 0.142.6 66050425 4 0.154.9 66050525 5 0.165 4.2 66050725 7 0.181 4.6 66050825 8 0.205 5.2 66051225 12 0.240 6.1 66051425 14 0.252 6.4 66051625 16 0.264 6.7 66051825 18 0.280 7.1 66052125 21 0.11 7.9 66052425 24 0.1 8.4 66052725 27 0.9 8.6 6605025 0 0.50 8.9 6605225 2 0.62 9.2 6605625 6 0.94 10.0 66054025 40 0.417 10.6 66054425 44 0.47 11.1 66055025 50 0.457 11.6 66056125 61 0.484 12. 11 1 16 19 24 29 8 4 48 54 65 70 77 84 89 105 116 124 17 162 22 AWG ( 7/0) 0.4 mm 2 6605024 2 0.157 4.0 16 660504 0.165 4.2 18 6605044 4 0.181 4.6 22 6605054 5 0.197 5.0 27 6605074 7 0.217 5.5 6605084 8 0.256 6.5 42 6605124 12 0.287 7. 54 6605144 14 0.11 7.9 6 6605164 16 0.27 8. 71 6605184 18 0.46 8.8 79 6605214 21 0.94 10.0 98 6605244 24 0.417 10.6 106 6605274 27 0.425 10.8 116 660504 0 0.441 11.2 126 660524 2 0.457 11.6 14 660564 6 0.476 12.1 148 6605404 40 0.508 12.9 164 6605444 44 0.51 1.5 175 6605504 50 0.571 14.5 204 6605614 61 0.606 15.4 241 ontinued on next page E-mail: info@sab.com Web site: www.sab.com
DIN EN 45545-2 edition 201 HALOGEN-FREE ABLES R 605 FRN S Rail Data Flame retardant acc. to UN/EE R118 BRÖSES D-VIERSEN XR 605 FRN 2 x 0 Marking for XR 605 FRN 6605250: A BRÖSES D-VIERSEN XR 605 FRN 2 x 0.5 mm 2 With our specially developed for rail vehicles data with colored A R 605 FRN, we offer our customers maximum planning certainty and comfort for flexible installation in railway vehicles. In addition to high flexibility, these s meet the highest safety standards for the railway industry. For these s, the stringent requirements have been confirmed in accordance with DIN EN 45545-2. onductor: bare copper strands with reference to IE 60228, EN 6028, VDE 0295, class 5 olor code: with reference to DIN 47100 gray fulfills fire protection requirements R15 (EL1A) acc. to DIN EN 45545-2 for hazard levels HL1- flame retardant acc. to UN/EE R118 Especially for use in rail vehicles Peak operating voltage: Testing voltage: < 24 AWG = max. 50 V 24 AWG = max. 500 V < 24 AWG = 800 V 24 AWG = 1200 V fixed laying: 5 x O. D. flexible application: 10 x O. D. fixed laying: flexible application: Zero halogen: -40/+90-0/+90 acc. to EN 5006-1 + EN 50264-1 are fulfilled. Development of Hl is < 0.5% acc. to DIN EN 50267-2-1. ph-value is > 4. acc. to DIN EN 50267-2-2. onductivity is < 10.0 µs/mm acc. to DIN EN 50267-2-2. Fluoric content < 0.1% acc. to DIN EN 60684-2. Burning characteristics: No flame propagation acc. to DIN EN 602--24, DIN EN 602--25 and DIN EN 5005 section 9.1.2. Flame retardant and self-extinguishing acc. to DIN EN 602-1-2. Flame retardant acc. to ISO 6722 (UN/EE R118) Toxicity: acc. to DIN EN 5005 Smoke density: acc. to DIN EN 6104 good Tested at reference types. 20 AWG ( 16/2) 0.50 mm 2 66050250 2 0.169 4. 6605050 0.177 4.5 66050450 4 0.19 4.9 66050550 5 0.21 5.4 66050750 7 0.240 6.1 66050850 8 0.280 7.1 66051250 12 0.19 8.1 66051450 14 0.5 8.5 66051650 16 0.54 9.0 66051850 18 0.74 9.5 66052150 21 0.429 10.9 66052450 24 0.45 11.5 66052750 27 0.461 11.7 6605050 0 0.476 12.1 6605250 2 0.496 12.6 6605650 6 0.516 1.1 66054450 44 0.594 15.1 66055050 50 0.618 15.7 66056150 61 0.657 16.7 19 22 27 42 5 69 77 88 97 121 11 14 156 167 184 229 276 01 19 AWG ( 2/2) 0.75 mm 2 66050275 2 0.19 4.9 6605075 0.205 5.2 66050475 4 0.22 5.9 66050575 5 0.252 6.4 66050775 7 0.276 7.0 66050875 8 0.27 8. 66051275 12 0.70 9.4 66051475 14 0.406 10. 66051675 16 0.425 10.8 66051875 18 0.449 11.4 66052175 21 0.492 12.5 66052475 24 0.524 1. 66052775 27 0.55 1.6 6605075 0 0.571 14.5 6605275 2 0.591 15.0 6605675 6 0.614 15.6 66054075 40 0.657 16.7 66054475 44 0.689 17.5 66055075 50 0.720 18. 66056175 61 0.780 19.8 26 0 9 47 58 75 95 114 129 14 167 181 200 228 242 268 298 19 56 45 18 AWG ( 0/2) 1.00 mm 2 66050280 2 0.201 5.1 29 6605080 0.21 5.4 6 66050480 4 0.240 6.1 46 66050580 5 0.264 6.7 55 66050680 6 0.287 7. 65 66050780 7 0.287 7. 70 16 AWG ( 27-29/0) 1.50 mm 2 66050285 2 0.220 5.6 7 6605085 0.240 6.1 48 66050485 4 0.264 6.7 58 66050585 5 0.0 7.7 76 66050685 6 0.1 8.4 90 66050785 7 0.1 8.4 97 4 E-mail: info@sab.com Web site: www.sab.com
DIN EN 45545-2 edition 201 HALOGEN-FREE ABLES R 615 FRN ASTM E 162-09 ASTM E 662-09 S Rail Data with overall tinned copper screen Flame retardant acc. to UN/EE R118 SEN XR 615 FRN 7 x 0.5 mm 2 Marking for XR 615 FRN 66150750: A BRÖSES D-VIERSEN XR 615 FRN 7 x 0.5 mm 2 Especially for use in rail vehicles With our specially developed for rail vehicles data with colored and overall tinned copper screen A R 615 FRN, we offer our customers maximum planning certainty and comfort for flexible installation in railway vehicles. In addition to high flexibility, these s meet the highest safety standards for the railway industry. For these s, the stringent requirements have been confirmed in accordance with DIN EN 45545-2. onductor: bare copper strands with reference to IE 60228, EN 6028, VDE 0295, class 5 olor code: with reference to DIN 47100 Wrapping: Screen: PETP foil tinned copper braiding gray good EM characteristics* fulfills fire protection requirements R15 (EL1A) acc. to DIN EN 45545-2 for hazard levels HL1- flame retardant acc. to UN/EE R118 tested acc. to American ASTM standard * opper braiding should be connected circularly to optimize * the EM characteristics Peak operating voltage: Testing voltage: < 24 AWG = max. 50 V 24 AWG = max. 500 V < 24 AWG = 800 V 24 AWG = 1200 V fixed laying: 5 x O. D. flexible application: 10 x O. D. fixed laying: flexible application: Zero halogen: -40/+90-0/+90 acc. to EN 5006-1 + EN 50264-1 are fulfilled. Development of Hl is < 0.5% acc. to DIN EN 50267-2-1. ph-value is > 4. acc. to DIN EN 50267-2-2. onductivity is < 10.0 µs/mm acc. to DIN EN 50267-2-2. Fluoric content < 0.1% acc. to DIN EN 60684-2. Burning characteristics: No flame propagation acc. to DIN EN 602--24, DIN EN 602--25 and DIN EN 5005 section 9.1.2. Flame retardant and self-extinguishing acc. to DIN EN 602-1-2. Flame retardant acc. to ISO 6722 (UN/EE R118). Burning tests acc. to ASTM E 162-09. Toxicity: acc. to DIN EN 5005 Smoke density: acc. to DIN EN 6104 + ASTM E 662-09 good Tested at reference types. 44 26 AWG ( 18/8) 0.14 mm 2 66150214 2 0.142.6 6615014 0.150.8 66150414 4 0.157 4.0 66150514 5 0.169 4. 66150714 7 0.181 4.6 66150814 8 0.21 5.4 66151014 10 0.228 5.8 66151214 12 0.244 6.2 66151414 14 0.252 6.4 66151614 16 0.264 6.7 66151814 18 0.276 7.0 66152114 21 0.299 7.6 66152414 24 0.15 8.0 66152714 27 0.9 8.6 6615014 0 0.46 8.8 6615214 2 0.58 9.1 6615614 6 0.70 8.4 66154014 40 0.94 10.0 66154414 44 0.417 10.6 66155014 50 0.4 11.0 66155214 52 0.4 11.0 66156114 61 0.457 11.6 14 15 16 19 22 29 2 6 40 45 48 56 60 70 75 79 86 95 109 118 120 16 24 AWG ( 14/4) 0.25 mm 2 66150225 2 0.154.9 6615025 0.161 4.1 66150425 4 0.17 4.4 66150525 5 0.19 4.9 66150725 7 0.209 5. 66150825 8 0.240 6.1 66151025 10 0.260 6.6 66151225 12 0.268 6.8 66151425 14 0.280 7.1 66151625 16 0.291 7.4 66151825 18 0.07 7.8 66152125 21 0.46 8.8 66152425 24 0.66 9. 66152725 27 0.74 9.5 6615025 0 0.86 9.8 6615225 2 0.98 10.1 6615625 6 0.421 10.7 66154025 40 0.445 11. 66154425 44 0.465 11.8 66155025 50 0.500 12.7 66155225 52 0.500 12.7 66156125 61 0.528 1.4 16 17 21 26 1 9 4 48 54 60 66 82 87 95 102 108 127 140 149 171 175 198 22 AWG ( 7/0) 0.4 mm 2 6615024 2 0.177 4.5 21 661504 0.19 4.9 24 6615044 4 0.209 5. 29 6615054 5 0.224 5.7 4 6615074 7 0.252 6.4 42 6615084 8 0.28 7.2 52 6615104 10 0.07 7.8 58 6615124 12 0.15 8.0 65 6615144 14 0.46 8.8 79 6615164 16 0.62 9.2 87 6615184 18 0.82 9.7 97 6615214 21 0.421 10.7 119 6615244 24 0.445 11. 10 6615274 27 0.45 11.5 19 661504 0 0.469 11.9 149 661524 2 0.500 12.7 166 661564 6 0.520 1.2 18 6615404 40 0.551 14.0 202 6615444 44 0.575 14.6 214 6615504 50 0.622 15.8 259 6615524 52 0.622 15.8 265 6615614 61 0.657 16.7 246 ontinued on next page E-mail: info@sab.com Web site: www.sab.com
DIN EN 45545-2 edition 201 HALOGEN-FREE ABLES R 615 FRN ASTM E 162-09 ASTM E 662-09 S Rail Data with overall tinned copper screen Flame retardant acc. to UN/EE R118 Especially for use in rail vehicles D-VIERSEN XR 615 FRN 7 x 0.5 m Marking for XR 615 FRN 66150750: A BRÖSES D-VIERSEN XR 615 FRN 7 x 0.5 mm 2 With our specially developed for rail vehicles data with colored and overall tinned copper screen A R 615 FRN, we offer our customers maximum planning certainty and comfort for flexible installation in railway vehicles. In addition to high flexibility, these s meet the highest safety standards for the railway industry. For these s, the stringent requirements have been confirmed in accordance with DIN EN 45545-2. onductor: bare copper strands with reference to IE 60228, EN 6028, VDE 0295, class 5 olor code: with reference to DIN 47100 Wrapping: PETP foil Screen: tinned copper braiding gray good EM characteristics* fulfills fire protection requirements R15 (EL1A) acc. to DIN EN 45545-2 for hazard levels HL1- flame retardant acc. to UN/EE R118 tested acc. to American ASTM standard * opper braiding should be connected circularly to optimize * the EM characteristics Peak operating voltage: < 24 AWG = max. 50 V 24 AWG = max. 500 V Testing voltage: < 24 AWG = 800 V 24 AWG = 1200 V fixed laying: 5 x O. D. flexible application: 10 x O. D. fixed laying: -40/+90 flexible application: -0/+90 Zero halogen: acc. to EN 5006-1 + EN 50264-1 are fulfilled. Development of Hl is < 0.5% acc. to DIN EN 50267-2-1. ph-value is > 4. acc. to DIN EN 50267-2-2. onductivity is < 10.0 µs/mm acc. to DIN EN 50267-2-2. Fluoric content < 0.1% acc. to DIN EN 60684-2. Burning characteristics: No flame propagation acc. to DIN EN 602--24, DIN EN 602--25 and DIN EN 5005 section 9.1.2. Flame retardant and self-extinguishing acc. to DIN EN 602-1-2. Flame retardant acc. to ISO 6722 (UN/EE R118). Burning tests acc. to ASTM E 162-09. Toxicity: acc. to DIN EN 5005 Smoke density: acc. to DIN EN 6104 + ASTM E 662-09 good Tested at reference types. 20 AWG ( 16/2) 0.50 mm 2 66150250 2 0.197 5.0 6615050 0.205 5.2 66150450 4 0.220 5.6 66150550 5 0.248 6. 66150750 7 0.268 6.8 66150850 8 0.07 7.8 66151050 10 0.46 8.8 66151250 12 0.54 9.0 66151450 14 0.70 9.4 66151650 16 0.90 9.9 66151850 18 0.417 10.6 66152150 21 0.457 11.6 66152450 24 0.496 12.6 66152750 27 0.504 12.8 6615050 0 0.520 1.2 6615250 2 0.59 1.7 6615650 6 0.559 14.2 66154450 44 0.646 16.4 66155050 50 0.669 17.0 66156150 61 0.709 18.0 26 28 4 42 51 6 76 85 9 105 124 148 161 175 190 201 222 284 15 6 19 AWG ( 2/2) 0.75 mm 2 66150275 2 0.220 5.6 6615075 0.240 6.1 66150475 4 0.260 6.6 66150575 5 0.280 7.1 66150775 7 0.0 7.7 66150875 8 0.62 9.2 66151275 12 0.41 10.5 66151475 14 0.4 11.0 66151675 16 0.45 11.5 66151875 18 0.488 12.4 66152175 21 0.55 1.6 66152475 24 0.567 14.4 66152775 27 0.579 14.7 6615075 0 0.622 15.8 6615275 2 0.642 16. 6615675 6 0.665 19.6 2 8 49 54 68 89 120 1 151 17 200 218 27 280 296 22 18 AWG ( 0/2) 1.00 mm 2 66150280 2 0.228 5.8 6 6615080 0.248 6. 44 66150480 4 0.268 6.8 52 66150580 5 0.291 7.4 64 66150680 6 0.15 8.0 75 66150780 7 0.15 8.0 79 18 AWG ( 0/2) 1.50 mm 2 66150285 2 0.260 6.6 48 6615085 0.268 6.8 60 66150485 4 0.291 7.4 66 66150585 5 0.9 8.6 87 66150685 6 0.66 9. 102 66150785 7 0.66 9. 109 45 E-mail: info@sab.com Web site: www.sab.com
DIN EN 45545-2 edition 201 HALOGEN-FREE ABLES R 645 FRN TP ASTM E 162-09 ASTM E 662-09 S Rail Data, paired with overall tinned copper screen Flame retardant acc. to UN/EE R118 SEN XR 645 FRN TP x 2 x 0.25 mm 2 Marking for XR 645 FRN TP 6645025: A BRÖSES D-VIERSEN XR 645 FRN TP x 2 x 0.25 mm 2 With our specially developed for rail vehicles data with colored, overall tinned copper screen and twisted pairs A R 645 FRN TP, we offer our customers maximum planning certainty and comfort for flexible installation in railway vehicles. In addition to high flexibility, these s meet the highest safety standards for the railway industry. For these s, the stringent requirements have been confirmed in accordance with DIN EN 45545-2. onductor: bare copper strands with reference to IE 60228, EN 6028, VDE 0295, class 5 olor code: with reference to DIN 47100 Wrapping: Screen: pairwise, pairs PETP foil tinned copper braiding gray good EM characteristics* fulfills fire protection requirements R15 (EL1A) acc. to DIN EN 45545-2 for hazard levels HL1- flame retardant acc. to UN/EE R118 tested acc. to American ASTM standard good transmission rates and crosstalk attenuation * opper braiding should be connected circularly to optimize * the EM characteristics Peak operating voltage: Testing voltage: < 24 AWG = max. 50 V 24 AWG = max. 500 V < 24 AWG = 800 V 24 AWG = 1200 V fixed laying: 5 x O. D. flexible application: 10 x O. D. fixed laying: flexible application: -40/+90-0/+90 Zero halogen: acc. to EN 5006-1 + EN 50264-1 are fulfilled. Development of Hl is < 0.5% acc. to DIN EN 50267-2-1. ph-value is > 4. acc. to DIN EN 50267-2-2. onductivity is < 10.0 µs/mm acc. to DIN EN 50267-2-2. Fluoric content < 0.1% acc. to DIN EN 60684-2. Burning characteristics: No flame propagation acc. to DIN EN 602--24, DIN EN 602--25 and DIN EN 5005 section 9.1.2. Flame retardant and self-extinguishing acc. to DIN EN 602-1-2. Flame retardant acc. to ISO 6722 (UN/EE R118). Burning tests acc. to ASTM E 162-09. Toxicity: acc. to DIN EN 5005 Smoke density: acc. to DIN EN 6104 + ASTM E 662-09 good 46 pairs 26 AWG ( 18/8) 0.14 mm 2 66450214 2 0.205 5.2 6645014 0.224 5.7 66450414 4 0.256 6.5 66450514 5 0.276 7.0 66450614 6 0.28 7.2 66450814 8 0.07 7.8 66451014 10 0.50 8.9 66451214 12 0.82 9.7 66451614 16 0.41 10.5 66451814 18 0.47 11.1 66452414 24 0.504 12.8 24 AWG ( 14/4) 0.25 mm 2 66450225 2 0.224 5.7 6645025 0.252 6.4 66450425 4 0.28 7.2 66450525 5 0.0 7.7 66450625 6 0.11 7.9 66450825 8 0.54 9.0 66451025 10 0.86 9.8 66451225 12 0.429 10.9 66451625 16 0.469 11.9 66451825 18 0.500 12.7 66452425 24 0.559 14.2 26 0 6 4 48 56 71 81 99 117 150 1 41 48 56 62 80 9 116 14 165 199 pairs 22 AWG ( 7/0) 0.4 mm 2 6645024 2 0.268 6.8 664504 0.291 7.4 6645044 4 0.46 8.8 6645054 5 0.74 9.5 6645064 6 0.82 9.7 6645084 8 0.417 10.6 6645124 12 0.528 1.4 6645164 16 0.575 14.6 6645184 18 0.594 15.1 6645244 24 0.69 17.6 20 AWG ( 16/2) 0.50 mm 2 66450250 2 0.28 7.2 6645050 0.11 7.9 66450450 4 0.70 9.4 66450550 5 0.402 10.2 66450650 6 0.409 10.4 66450850 8 0.449 11.4 66451050 10 0.520 1.2 66451250 12 0.567 14.4 66451650 16 0.642 16. 66451850 18 0.665 16.9 66452450 24 0.748 19.0 42 5 69 81 84 107 167 205 224 02 48 62 80 95 104 120 169 198 255 29 41 pairs 19 AWG ( 2/2) 0.75 mm 2 66450275 2 0.5 8.5 69 6645075 0.70 9.4 86 66450475 4 0.429 10.9 112 66450575 5 0.461 11.7 15 66450675 6 0.492 12.5 161 66450875 8 0.59 1.7 187 66451275 12 0.67 17.1 282 66451675 16 0.72 18.6 51 66451875 18 0.760 19. 90 66452475 24 0.858 21.8 480 Especially for use in rail vehicles E-mail: info@sab.com Web site: www.sab.com
DIN EN 45545-2 edition 201 HALOGEN-FREE ABLES A 280 FRN X Wiring / ontrol up to +125 S BRÖSES D-VIERSEN XA 280 FRN X 1 x 1.0 mm2 Especially for use in rail vehicles Marking for XA 280 FRN X 62800110: A BRÖSES D-VIERSEN XA 280 FRN X 1 x 1.0 mm 2 BRÖSES D-VIERSEN XA 280 FRN X 1 x 1.0 m Marking for XA 280 FRN X 628000505: A BRÖSES D-VIERSEN XA 280 FRN X 5 x 0.5 mm 2 Our control A A 280 FRN X fulfill the requirements of DIN EN 45545-2 and have proven durable in use. onductor: Single conductor: olor code: Multi-conductor : olor code: Multi-conductor : Multi-conductor : Multi-conductor : tinned copper strands fine wires acc. to IE 60228, EN 60228, VDE 0295, class 5 white white with black numbers acc. to. EN 504 black good ozone resistance good oil and chemical resistance fulfills fire protection requirements R15 (EL1A) acc. to DIN EN 45545-2 for hazard levels HL1- ohmic resistance at 20 max. Ω/km heating value approx. kwh/km Nominal voltage: Testing voltage: Uo/U 00/500 V 2000 V : 5 x O. D. in conduit, fixed laying: Zero halogen: -40/+125 (single conductor) -50/+125 (multi-core ) acc. to EN 5006-1 + EN 50264-1 are fulfilled. Development of Hl is < 0.5% acc. to DIN EN 50267-2-1. ph-value is > 4. acc. to DIN EN 50267-2-2. onductivity is < 10.0 µs/mm acc. to DIN EN 50267-2-2. Fluoric content < 0.1% acc. to DIN EN 60684-2. Burning characteristics: No flame propagation acc. to DIN EN 602--24, DIN EN 602--25 and DIN EN 5005 section 9.1.2. Flame retardant and self-extinguishing acc. to DIN EN 602-1-2. Toxicity: acc. to DIN EN 5005 Smoke density: acc. to DIN EN 6104 ohmic resistance at 20 max. Ω/km heating value approx. kwh/km 47 20 AWG ( 16/2) 0.50 mm 2 62800105 1 0.067 1.7 5 40.1 1 6280005 0.185 4.7 24 40.1 115 62800505 5 0.228 5.8 4 40.1 170 62800805 8 0.287 7. 56 40.1 246 62801005 10 0.19 8.1 65 40.1 275 62801205 12 0.1 8.4 75 40.1 06 19 AWG ( 2/2) 0.75 mm 2 62800607 6 0.28 7.2 58 26.7 27 62800807 8 0.287 7. 68 26.7 245 62801007 10 0.70 9.4 89 26.7 45 18 AWG ( 0/2) 1.00 mm 2 62800110 1 0.08 2.1 8 20.0 16 6280010 0.217 5.5 7 20.0 162 62800410 4 0.244 6.2 48 20.0 186 62800610 6 0.295 7.5 68 20.0 252 62800810 8 0.54 9.0 91 20.0 8 62801010 10 0.98 10.1 110 20.0 402 18 AWG ( 0/2) 1.50 mm 2 62800115 1 0.098 2.5 11 1.7 22.5 6280015 0.260 6.6 46 1.7 210 14 AWG ( 46/0) 2.50 mm 2 6280125 1 0.122.1 18 8.21 4 E-mail: info@sab.com Web site: www.sab.com
DIN EN 45545-2 edition 201 HALOGEN-FREE ABLES A 285 FRN X ontrol with numbered and overall tinned copper screen up to +125 -VIERSEN XA 285 FRN X 5 x 0.5 mm 2 Marking for XA 285 FRN X 628500505: A BRÖSES D-VIERSEN XA 285 FRN X 5 x 0.5 mm 2 Our control A A 280 FRN X fulfills the requirements of DIN EN 45545-2 and have proven durable in use. onductor: olor code: Wrapping: Screen: tinned copper strands fine wires acc. to IE 60228, EN 60228, VDE 0295, class 5 white with black numbers acc. to. EN 504 PETP foil tinned copper braiding black good EM characteristics* good ozone resistance good oil and chemical resistance fulfills fire protection requirements R15 (EL1A) acc. to DIN EN 45545-2 for hazard levels HL1- * opper braiding should be connected circularly to optimize * the EM characteristics Nominal voltage: Uo/U 00/500 V Testing voltage: 2000 V : 10 x O. D. in conduit, fixed laying: -50/+125 Zero halogen: acc. to EN 5006-1 + EN 50264-1 are fulfilled. Development of Hl is < 0.5% acc. to DIN EN 50267-2-1. ph-value is > 4. acc. to DIN EN 50267-2-2. onductivity is < 10.0 µs/mm acc. to DIN EN 50267-2-2. Fluoric content < 0.1% acc. to DIN EN 60684-2. Burning characteristics: No flame propagation acc. to DIN EN 602--24, DIN EN 602--25 and DIN EN 5005 section 9.1.2. Flame retardant and self-extinguishing acc. to DIN EN 602-1-2. Toxicity: acc. to DIN EN 5005 Smoke density: acc. to DIN EN 6104 ohmic resistance at 20 max. Ω/km heating value approx. kwh/km ohmic resistance at 20 max. Ω/km heating value approx. kwh/km 48 20 AWG ( 16/2) 0.50 mm 2 6285005 0.205 5.2 0 40.1 99 62850505 5 0.248 6. 46 40.1 154 62850805 8 0.11 7.9 65 40.1 27 62851005 10 0.9 8.6 77 40.1 258 62851205 12 0.50 8.9 85 40.1 288 19 AWG ( 2/2) 0.75 mm 2 62850607 6 0.0 7.7 68 26.7 21 62850807 8 0.58 9.1 89 26.7 05 62851007 10 0.409 10.4 116 26.7 81 18 AWG ( 0/2) 1.00 mm 2 6285010 0.244 6.2 44 20.0 155 62850610 6 0.2 8.2 84 20.0 285 62850810 8 0.86 9.8 108 20.0 66 62851010 10 0.425 10.8 14 20.0 401 Especially for use in rail vehicles E-mail: info@sab.com Web site: www.sab.com
BL = BlueLine HALOGEN-FREE ABLES BL 405 FRN Flexible data approval A BRÖSES D-VIERSEN XBL 405 FRN Data able 16 x 0.5 mm 2 16 x 0.5 mm 2 ABS Assessed Lloyd s Register Marking for X BL 405 FRN 64051650: ABS Assessed Lloyd s Register and current meter marking The A BlueLine s have been approved by GL, LR as well as ABS. Their A characteristics fulfill the highest safety-related aspects in shipbuilding with regards to both fire performance as well as being. Data s, type A BlueLine Data, are available with small cross sections beginning with 26 AWG. This results in a small outer diameter which offers an outstanding advantage particularly where there is only a little space. onductor: tinned copper strands acc. to DIN VDE 0812 resp. IE 60228, EN 60228, VDE 0295, class 5 olor code: with reference to DIN 47100 SHF 1 compound acc. to IE 60092-59 pigeon blue asbestos-free flexible for applications acc. to Hong ong onvention ingredients tested acc. to the requirements of the Hong ong onvention (2009) of the IMO approvals: Germanischer Lloyd Lloyd s Register American Bureau of Shipping Registro Italiano Navale Peak operating voltage: max. 50 V Testing voltage: 1500 V fixed laying: 5 x O. D. flexible application: 10 x O. D. fixed laying: -40/+90 flexible application: -0/+90 Zero halogen: acc. to EN 50267-2-1 + IE 60754-1 Burning characteristics: acc. to IE 602--22 + DIN EN 602--22 cat. A. Flame retardant and self-extinguishing acc. to IE 602-1-2 + DIN EN 602-1-2 orrosivity: in compliance with IE 60754-2 + DIN EN 50267-2-2 - Smoke density: acc. to IE 6104 + EN 6104 very good q and Possible on request: bare copper strands alternative color code jacket color 26 AWG ( 18/8) 0.14 mm 2 64050214 2 0.142.6 6405014 0.150.8 64050414 4 0.161 4.1 64050514 5 0.177 4.5 64050614 6 0.189 4.8 64050714 7 0.189 4.8 64050814 8 0.217 5.5 64051214 12 0.248 6. 64051614 16 0.276 7.0 24 AWG ( 14/4) 0.25 mm 2 64050225 2 0.154.9 6405025 0.161 4.1 64050425 4 0.177 4.5 64050525 5 0.19 4.9 64050625 6 0.209 5. 64050725 7 0.209 5. 64050825 8 0.244 6.2 64051225 12 0.276 7.0 64051625 16 0.0 7.7 12 14 16 19 22 24 28 8 47 15 17 21 25 29 1 8 50 62 22 AWG ( 7/0) 0.4 mm 2 6405024 2 0.169 4. 640504 0.181 4.6 6405044 4 0.197 5.0 6405054 5 0.21 5.4 6405064 6 0.240 6.1 6405074 7 0.240 6.1 6405084 8 0.276 7.0 6405124 12 0.07 7.8 6405164 16 0.54 9.0 20 AWG ( 16/2) 0.50 mm 2 64050250 2 0.185 4.7 6405050 0.197 5.0 64050450 4 0.21 5.4 64050550 5 0.240 6.1 64050650 6 0.264 6.7 64050750 7 0.264 6.7 64050850 8 0.0 7.7 64051250 12 0.54 9.0 64051650 16 0.94 10.0 19 22 26 2 9 41 49 64 87 24 28 4 4 50 5 64 89 114 19 AWG ( 2/2) 0.75 mm 2 64050275 2 0.205 5.2 29 6405075 0.217 5.5 5 64050475 4 0.244 6.2 44 64050575 5 0.268 6.8 5 64050675 6 0.291 7.4 62 64050775 7 0.291 7.4 67 64050875 8 0.46 8.8 85 64051275 12 0.98 10.1 112 64051675 16 0.47 11.1 142 especially for use in shipbuilding industry 49 E-mail: info@sab.com Web site: www.sab.com
approval HALOGEN-FREE ABLES BL 415 FRN Flexible data with overall tinned copper screen BL = BlueLine m 2 ABS Assessed Lloyd s Register Marking for X BL 415 FRN 6415075: A BRÖSES D-VIERSEN XBL 415 FRN Data able 7 x 0.5 mm 2 ABS Assessed Lloyd s Register and current meter marking The A BlueLine s have been approved by GL, LR as well as ABS. Their A characteristics fulfill the highest safety-related aspects in shipbuilding with regards to both fire performance as well as being. Data s, type A BlueLine Data, are available with small cross sections beginning with 26 AWG. This results in a small outer diameter which offers an outstanding advantage particularly where there is only a little space. 50 onductor: tinned copper strands acc. to DIN VDE 0812 resp. IE 60228, EN 60228, VDE 0295, class 5 olor code: with reference to DIN 47100 Wrapping: Screen: PETP foil tinned copper braiding SHF 1 compound acc. to IE 60092-59 pigeon blue 26 AWG ( 18/8) 0.14 mm 2 64150214 2 0.161 4.1 6415014 0.169 4. 64150414 4 0.181 4.6 64150514 5 0.197 5.0 64150614 6 0.209 5. 64150714 7 0.209 5. 64150814 8 0.244 6.2 64151214 12 0.268 5.8 64151614 16 0.295 7.5 24 AWG ( 14/4) 0.25 mm 2 64150225 2 0.17 4.4 6415025 0.181 4.6 64150425 4 0.197 5.0 64150525 5 0.21 5.4 64150625 6 0.228 5.8 64150725 7 0.228 5.8 64150825 8 0.264 6.7 64151225 12 0.295 7.5 64151625 16 0.9 8.6 asbestos-free good EM characteristics* flexible for applications acc. to Hong ong onvention ingredients tested acc. to the requirements of the Hong ong onvention (2009) of the IMO approvals: Germanischer Lloyd Lloyd s Register American Bureau of Shipping Registro Italiano Navale * opper braiding should be connected circularly to optimize * the EM characteristics 17 19 24 27 29 0 8 47 57 22 24 28 6 8 48 60 79 Peak operating voltage: Testing voltage: max. 50 V 1500 V fixed laying: 5 x O. D. flexible application: 10 x O. D. fixed laying: flexible application: -40/+90-0/+90 Zero halogen: acc. to EN 50267-2-1 + IE 60754-1 Burning characteristics: acc. to IE 602--22 + DIN EN 602--22 cat. A. Flame retardant and self-extinguishing acc. to IE 602-1-2 + DIN EN 602-1-2 orrosivity: in compliance with IE 60754-2 + DIN EN 50267-2-2 - Smoke density: acc. to IE 6104 + EN 6104 very good q and 22 AWG ( 7/0) 0.4 mm 2 6415024 2 0.189 4.8 641504 0.201 5.1 6415044 4 0.217 5.5 6415054 5 0.240 6.1 6415064 6 0.260 6.6 6415074 7 0.260 6.6 6415084 8 0.295 7.5 6415124 12 0.4 8.7 6415164 16 0.74 9.5 20 AWG ( 16/2) 0.50 mm 2 64150250 2 0.205 5.2 6415050 0.217 5.5 64150450 4 0.240 6.1 64150550 5 0.260 6.6 64150650 6 0.28 7.2 64150750 7 0.28 7.2 64150850 8 0.9 8.6 64151250 12 0.74 9.5 64151650 16 0.421 10.7 Possible on request: bare copper strands alternative color code jacket color 25 28 4 41 48 50 59 81 100 29 5 4 52 57 60 78 102 15 19 AWG ( 2/2) 0.75 mm 2 64150275 2 0.224 5.7 5 6415075 0.244 6.2 44 64150475 4 0.264 6.7 52 64150575 5 0.287 7. 62 64150675 6 0.11 7.9 71 64150775 7 0.11 7.9 77 64150875 8 0.66 9. 95 64151275 12 0.425 10.8 10 64151675 16 0.465 11.8 166 especially for use in shipbuilding industry E-mail: info@sab.com Web site: www.sab.com
BL = BlueLine HALOGEN-FREE ABLES BL 445 FRN TP Flexible paired data with overall tinned copper screen approval x 2 x 0.25 mm 2 ABS Assessed Lloyd s Regist Marking for X BL 445 FRN 6445025: A BRÖSES D-VIERSEN XBL 445 FRN Data able x 0.5 mm 2 ABS Assessed Lloyd s Register and current meter marking The A BlueLine s have been approved by GL, LR as well as ABS. Their A characteristics fulfill the highest safety-related aspects in shipbuilding with regards to both fire performance as well as being. Data s, type A BlueLine Data, are available with small cross sections beginning with 26 AWG. This results in a small outer diameter which offers an outstanding advantage particularly where there is only a little space. onductor: tinned copper strands acc. to DIN VDE 0812 resp. IE 60228, EN 60228, VDE 0295, class 5 olor code: with reference to DIN 47100 pairwise, pairs Wrapping: PETP foil Screen: tinned copper braiding SHF 1 compound acc. to IE 60092-59 pigeon blue pairs 26 AWG ( 18/8) 0.14 mm 2 64450214 2 0.209 5. 6445014 0.228 5.8 64450414 4 0.268 6.8 64450514 5 0.291 7.4 64450614 6 0.299 7.6 64450814 8 0.4 8.7 64451014 10 0.74 9.5 64451214 12 0.417 10.6 64451814 18 0.488 12.4 24 AWG ( 14/4) 0.25 mm 2 64450225 2 0.228 5.8 6445025 0.256 6.5 64450425 4 0.291 7.4 64450525 5 0.4 8.7 64450625 6 0.4 8.7 64450825 8 0.58 9.1 64451025 10 0.417 10.6 64451225 12 0.457 11.6 64451825 18 0.54 1.8 64452625 25 0.642 16. asbestos-free good EM characteristics* good transmission rates and crosstalk attenuation flexible for applications acc. to Hong ong onvention ingredients tested acc. to the requirements of the Hong ong onvention (2009) of the IMO approvals: Germanischer Lloyd Lloyd s Register American Bureau of Shipping Registro Italiano Navale * opper braiding should be connected circularly to optimize * the EM characteristics 25 0 9 46 51 66 77 95 14 0 8 48 65 70 81 105 121 18 247 pairs Peak operating voltage: Testing voltage: max. 50 V 1500 V fixed laying: 5 x O. D. flexible application: 10 x O. D. fixed laying: flexible application: -40/+90-0/+90 Zero halogen: acc. to EN 50267-2-1 + IE 60754-1 Burning characteristics: acc. to IE 602--22 + DIN EN 602--22 cat. A. Flame retardant and self-extinguishing acc. to IE 602-1-2 + DIN EN 602-1-2 orrosivity: in compliance with IE 60754-2 + DIN EN 50267-2-2 - Smoke density: acc. to IE 6104 + EN 6104 very good q and 22 AWG ( 7/0) 0.4 mm 2 6445024 2 0.252 6.4 644504 0.28 7.2 6445044 4 0.4 8.7 6445054 5 0.70 9.4 6445064 6 0.78 9.6 6445084 8 0.425 10.8 6445104 10 0.465 11.8 6445124 12 0.528 1.4 6445184 18 0.622 15.8 20 AWG ( 16/2) 0.50 mm 2 64450250 2 0.28 7.2 6445050 0.11 7.9 64450450 4 0.74 9.5 64450550 5 0.41 10.5 64450650 6 0.425 10.8 64450850 8 0.469 11.9 64451050 10 0.528 1.4 64451250 12 0.591 15.0 64451850 18 0.685 17.4 Possible on request: bare copper strands alternative color code jacket color 8 48 65 77 86 110 10 160 240 47 59 81 10 115 19 174 216 0 pairs 19 AWG ( 2/2) 0.75 mm 2 64450275 2 0.11 7.9 58 6445075 0.62 9.2 77 64450475 4 0.421 10.7 105 64450575 5 0.457 11.6 125 64450675 6 0.488 12.4 149 64450875 8 0.54 1.8 191 64451075 10 0.598 15.2 227 64451275 12 0.677 17.2 276 64451875 18 0.764 19.4 72 especially for use in shipbuilding industry 51 E-mail: info@sab.com Web site: www.sab.com
approval ol able 12 G 1.5 mm 2 HALOGEN-FREE ABLES BL 400 FRN Flexible control 00/500 V ABS Assessed Lloyd s Register BL = BlueLine Marking for X BL 400 FRN 64001215: A BRÖSES D-VIERSEN XBL 400 FRN ontrol able 12 G 1.5 mm 2 ABS Assessed Lloyd s Register and current meter marking The A BlueLine s have been approved by GL, LR as well as ABS. Their A characteristics fulfill the highest safety-related aspects in shipbuilding with regards to both fire performance as well as being. The type A BlueLine ontrol with a nominal voltage of 00/500 V compliment the new product series with control s for electrical components. onductor: tinned copper strands acc. to IE 60228, EN 60228, VDE 0295, class 5 olor code: black with consecutive numbers acc. to EN 504 green-yellow earth wire from SHF 1 compound acc. to IE 60092-59 pigeon blue asbestos-free flexible for applications acc. to Hong ong onvention ingredients tested acc. to the requirements of the Hong ong onvention (2009) of the IMO approvals: Germanischer Lloyd Lloyd s Register American Bureau of Shipping Registro Italiano Navale Nominal voltage: Uo/U 00/500 V Testing voltage U: 2000 V acc. to DIN VDE 0281 part 2 + HD 21.2 fixed laying: 4 x O. D. flexible application: 6 x O. D. fixed laying: flexible application: -40/+90-0/+90 Zero halogen: acc. to EN 50267-2-1 + IE 60754-1 Burning characteristics: acc. to IE 602--22 + DIN EN 602--22 cat. A. Flame retardant and self-extinguishing acc. to IE 602-1-2 + DIN EN 602-1-2 orrosivity: in compliance with IE 60754-2 + DIN EN 50267-2-2 - Smoke density: acc. to IE 6104 + EN 6104 very good q and Possible on request: bare copper strands alternative color code jacket color 52 20 AWG ( 16/2) 0.50 mm 2 64000205 2 0.209 5. 6400005 0.220 5.6 64000405 4 0.26 6.0 64000505 5 0.260 6.6 64000705 7 0.287 7. 64001205 12 0.78 9.6 64001805 18 0.449 11.4 19 AWG ( 2/2) 0.75 mm 2 64000207 2 0.228 5.8 6400007 0.240 6.1 64000407 4 0.264 6.7 64000507 5 0.291 7.4 64000707 7 0.19 8.1 64001207 12 0.429 10.9 64001807 18 0.504 12.8 28 40 48 60 99 142 4 40 50 61 76 126 181 18 AWG ( 0/2) 1.00 mm 2 64000210 2 0.26 6.0 6400010 0.248 6. 64000410 4 0.276 7.0 64000510 5 0.07 7.8 64000710 7 0.1 8.4 64001210 12 0.445 11. 64001810 18 0.51 1.5 16 AWG ( 27-29/0) 1.50 mm 2 64000215 2 0.264 6.7 6400015 0.276 7.0 64000415 4 0.11 7.9 64000515 5 0.9 8.6 64000715 7 0.74 9.5 64001215 12 0.500 12.7 64001815 18 0.602 15. 8 46 56 71 88 145 214 49 60 75 91 117 19 286 14 AWG ( 46/0) 2.50 mm 2 64000225 2 0.19 8.1 75 6400025 0.9 8.6 92 64000425 4 0.74 9.5 115 64000525 5 0.417 10.6 142 64000725 7 0.461 11.7 18 64001225 12 0.618 15.7 04 64001825 18 0.744 18.9 450 especially for use in shipbuilding industry E-mail: info@sab.com Web site: www.sab.com
BL = BlueLine HALOGEN-FREE ABLES Flexible control BL 48 FRN with overall tinned copper screen 00/500 V approval A BRÖSES D-VIERSEN XBL 48 FRN ontrol able 5 G 1.5 mm 2 5 G 1.5 mm 2 ABS Assessed Lloyd s Register Marking for X BL 48 FRN 6480515: ABS Assessed Lloyd s Register and current meter marking The A BlueLine s have been approved by GL, LR as well as ABS. Their A characteristics fulfill the highest safety-related aspects in shipbuilding with regards to both fire performance as well as being. The type A BlueLine ontrol with a nominal voltage of 00/500 V compliment the new product series with control s for electrical components. onductor: tinned copper strands acc. to IE 60228, EN 60228, VDE 0295, class 5 olor code Wrapping: Screen: black with consecutive numbers acc. to EN 504 green-yellow earth wire from PETP foil tinned copper braiding SHF 1 compound acc. to IE 60092-59 pigeon blue 20 AWG ( 16/2) 0.50 mm 2 6480205 2 0.228 5.8 648005 0.240 6.1 6480405 4 0.260 6.6 6480505 5 0.280 7.1 6480705 7 0.11 7.9 6481205 12 0.402 10.2 6481805 18 0.484 12. 19 AWG ( 2/2) 0.75 mm 2 6480207 2 0.252 6.4 648007 0.264 6.7 6480407 4 0.287 7. 6480507 5 0.15 8.0 6480707 7 0.4 8.7 6481207 12 0.461 11.7 6481807 18 0.59 1.7 asbestos-free good EM characteristics* flexible for applications acc. to Hong ong onvention ingredients tested acc. to the requirements of the Hong ong onvention (2009) of the IMO approvals: Germanischer Lloyd Lloyd s Register American Bureau of Shipping Registro Italiano Navale * opper braiding should be connected circularly to optimize * the EM characteristics 4 8 46 55 70 111 169 9 46 56 69 85 149 209 Nominal voltage: Uo/U 00/500 V Testing voltage U: 2000 V acc. to DIN VDE 0281 part 2 + HD 21.2, conductor/screen 2000 V fixed laying: 15 x O. D. flexible application: 10 x O. D. fixed laying: flexible application: -40/+90-0/+90 Zero halogen: acc. to EN 50267-2-1 + IE 60754-1 Burning characteristics: acc. to IE 602--22 + DIN EN 602--22 cat. A. Flame retardant and self-extinguishing acc. to IE 602-1-2 + DIN EN 602-1-2 orrosivity: in compliance with IE 60754-2 + DIN EN 50267-2-2 - Smoke density: acc. to IE 6104 + EN 6104 very good q and 18 AWG ( 0/2) 1.00 mm 2 6480210 2 0.260 6.6 648010 0.272 6.9 6480410 4 0.295 7.5 6480510 5 0.1 8.4 6480710 7 0.54 9.0 6481210 12 0.476 12.1 6481810 18 0.575 14.6 16 AWG ( 27-29/0) 1.50 mm 2 6480215 2 0.287 7. 648015 0.299 7.6 6480415 4 0.1 8.4 6480515 5 0.66 9. 6480715 7 0.98 10.1 6481215 12 0.51 1.5 6481815 18 0.642 16. Possible on request: bare copper strands alternative color code jacket color 44 52 62 79 97 168 254 54 65 81 101 126 217 28 14 AWG ( 46/0) 2.50 mm 2 6480225 2 0.4 8.7 77 648025 0.66 9. 97 6480425 4 0.98 10.1 121 6480525 5 0.45 11.5 159 6480725 7 0.492 12.5 201 6481225 12 0.661 16.8 45 6481825 18 0.791 20.1 506 especially for use in shipbuilding industry 5 E-mail: info@sab.com Web site: www.sab.com
approval HALOGEN-FREE ABLES BL 410 FRN Flexible power 0.6/1 kv BL = BlueLine 0,6/1 kv 12 G 1.5 mm 2 ABS Assessed Lloyd s Register Marking for X BL 410 FRN 64101215: A BRÖSES D-VIERSEN XBL 410 FRN Power able 0,6/1 kv 12 G 1.5 mm 2 ABS Assessed Lloyd s Register and current meter marking The A BlueLine s have been approved by GL, LR as well as ABS. Their A characteristics fulfill the highest safety-related aspects in shipbuilding with regards to both fire performance as well as being. The type A BlueLine Power with a nominal voltage of 0,6/1 kv compliment the new product series with power supply s for electrical components. onductor: tinned copper strands acc. to IE 60228, EN 60228, VDE 0295, class 5 olor code black with consecutive numbers acc. to EN 504 green-yellow earth wire from SHF 1 compound acc. to IE 60092-59 black asbestos-free flexible for applications acc. to Hong ong onvention ingredients tested acc. to the requirements of the Hong ong onvention (2009) of the IMO approvals: Germanischer Lloyd Lloyd s Register American Bureau of Shipping Registro Italiano Navale Nominal voltage: Uo/U 0,6/1 kv Testing voltage U: 4000 V acc. to DIN VDE 0281 part 2 + HD 21.2 fixed laying: 4 x O. D. flexible application: 6 x O. D. fixed laying: -40/+90 flexible application: -0/+90 Zero halogen: acc. to EN 50267-2-1 + IE 60754-1 Burning characteristics: acc. to IE 602--22 + DIN EN 602--22 cat. A. Flame retardant and self-extinguishing acc. to IE 602-1-2 + DIN EN 602-1-2 orrosivity: in compliance with IE 60754-2 + DIN EN 50267-2-2 - Smoke density: acc. to IE 6104 + EN 6104 very good q and Possible on request: bare copper strands alternative color code jacket color 54 16 AWG ( 27-29/0) 1.50 mm 2 64100215 2 0.50 8.9 6410015 0.70 9.4 64100415 4 0.402 10.2 64100515 5 0.449 11.4 64100715 7 0.488 12.4 64101015 10 0.626 15.9 64101215 12 0.654 16.6 64101415 14 0.685 17.4 64101815 18 0.768 19.5 14 AWG ( 46/0) 2.50 mm 2 64100225 2 0.82 9.7 6410025 0.406 10. 64100425 4 0.449 11.4 64100525 5 0.492 12.5 64100725 7 0.54 1.8 64101025 10 0.697 17.7 64101225 12 0.717 18.2 64101425 14 0.760 19. 64101825 18 0.854 21.7 81 92 110 18 168 25 274 08 96 101 118 147 179 226 17 6 418 56 12 AWG ( 52/28) 4.00 mm 2 64100240 2 0.469 11.9 6410040 0.496 12.6 64100440 4 0.551 14.0 64100540 5 0.606 15.4 64100740 7 0.669 17.0 10 AWG ( 78/28) 6.00 mm 2 64100260 2 0.508 12.9 6410060 0.547 1.9 64100460 4 0.598 15.2 64100560 5 0.669 17.0 64100760 7 0.728 18.5 8 AWG ( 77/26) 10.00 mm 2 6410061 0.661 16.8 64100461 4 0.724 18.4 64100561 5 0.807 20.5 155 181 224 276 49 19 25 287 60 45 60 44 554 6 AWG ( 122/26) 16.00 mm 2 6410062 0.787 20.0 52 64100462 4 0.870 22.1 655 64100562 5 0.972 24.7 818 4 AWG ( 190/26) 25.00 mm 2 641006 0.949 24.1 778 6410046 4 1.051 26.7 976 6410056 5 1.177 29.9 1228 2 AWG ( 272/26) 5.00 mm 2 6410064 1.08 27.5 105 64100464 4 1.197 0.4 122 1 AWG ( 400/26) 50.00 mm 2 6410065 1.224 1.1 1459 64100465 4 1.50 4. 1840 especially for use in shipbuilding industry E-mail: info@sab.com Web site: www.sab.com