Semiconductor / High Purity Products K SC IINGS Weld ittings / etal Seal ittings SC ivision
K SC SUPR CN CHNOOGY ICRO W IINGS ORG W IINGS C S IINGS 2 Super Clean itting Series
W and etal Seal ittings components are ordered by product code as listed in this catalogue W IINGS & S IINGS SIGNIONS PR NUR SYS S 4 6 P aterial Product Sleeve ength Inner Surface evel aterial S : Single elting 4 : : ouble elting 6 : 8 : 2 : 6 : lbow ee C Cross ribow R Reducer N emale Nut N ale Nut CP Cap PG Plug G Gasket G lind Gasket GR Gasket Retainer ssembly SG emale Gland SG utomatic emale Gland SWSG Socket Weld Short Gland G ale Gland G utomatic ale Gland SWG Socket Weld ong Gland HG H-S ale Gland HN H-S emale Nut HN H-S ale Nut Sleeve ength Inner Surface evel 6 : mm NK : 0 : 0mm P : P 9 : mm Product G lind Gland G ale Weld Gland ube dapter H ulkhead Union UC Union Cross C ale Connector C emale Connector ale lbow U Union ee U ouble ale Union U ouble emale Union U Union lbow CK ube itting Connector HCK ube itting ulkhead Connector HC ale ulkhead Connector CG Coupling R Reducing dapter R Reducing ushing HY H-S W ody HY H-S W ody HHY H-S ulkhead Connector Super Clean itting Series 3
SC ivision of K corporation W IINGS & S IINGS icro Reducer Reducing ee ube dapter 7 0 3 icro Reducing 90 lbow 7 Cross ee 0 ouble ale Union 4 icro 90 lbow 7 Reducer 0 ouble ale Reducing Union 4 icro xtended eg 90 lbow 7 emale Gland 2 ulkhead Union 4 icro 45 lbow ale Gland W ody 7 2 4 icro ee 8 W emale ong Gland 2 W ulkhead Connector 4 icro Reducing ee 8 W ale ong Gland 2 Coupling 4 icro Cross 8 Socket Weld Short Gland 3 ouble emale Reducing Union 5 icro ribow 8 Socket Weld ong Gland 3 Reducing dapter 5 90 lbow 9 Socket Weld Reducing ong Gland 3 Reducing ushing 5 Reducing 90 lbow lind Gland ale lbow (P) 9 3 5 ee ale Weld Gland ale lbow (NP) 9 3 5 4 Super Clean itting Series
INX Union lbow 6 Gasket 8 HS ulkhead Connector 2 Union ee 6 lind Gasket 8 Welded ale Connector(P) 2 Union Cross 6 emale Nut 9 Welded ale Connector(NP) 2 ube itting Connector 6 ale Nut 9 Welded emale Connector(P) 2 ube itting ulkhead Connector 7 Plug 9 Welded emale Connector(NP) 22 ale ulkhead Connector(NP) 7 Cap 9 Welded ok Connector 22 ale Connector(P) 7 ale Connector(NP) 7 ale Connector(S) 7 Plug(Cable ype) HS emale Nut HS ale Nut 20 20 20 Welded emale Union 22 emale Connector(P) 8 HS ong Gland 20 emale Connector(NP) Gasket Retainner ssembly 8 8 HS W ody HS W ody 20 2 Super Clean itting Series 5
W IINGS icro Weld ittings orged Weld ittings eatures 36 +RH+VR(ouble elt) aterial Permanently Heat code marked; traceable to original mill certificate of test. lectropolished components permanently marked with designator on cube(p or PX) Critical surfaces are 00% visually inspected using magnification and lighting. aterials 36 +RH+VR(ouble elt) aterial complies with S 276 and S S479. Recomended tubing specifications include S S23, S 23, S 249, S 269, I 8504, I 8506 and JIS G4303. Specitications Pressure Ratings will be governed by the tubing selected for a particular application. Working Pressures are calculated below for tubing using maximum allowable stress levels in accordance with S/NSI 3.3, at ambient temperature. imensions are for reference only and are subject to change. Internal Surface inishes: Standard finish icro ittings have an internal Surface Roughness of 3.0 Ry lectropolished icro ittings have an internal Surface Roughness of 0.7 Ry. ube O.. in. Pressure Rating psig 500 358 Normal Wall hickness mm esignator Surface inish(ry) aximum in. 3300 232 mm P 0.7 in. 3500 246.24mm 3.0 6 Super Clean itting Series
SC ivision of K corporation ICRO W IINGS icro Weld ittings icro Reducer (O) (O) /8 4 2R6 6 4R6 8 4R6 8 6R6 2 4R6 2 6R6 2 8R6 2.70 2.70 3.8 2.70.24.24 0.7.24 0.4 0.4 0.4 0.4 0.4 0.4 0.4 9. 9. 9. 9. 9. 9. 9. icro Reducing 90 lbow (O) (O) /8 4 26 6 46 8 46 8 66 2 46 2 66 2 86 2.70 2.70 3.8 2.70.24.24 0.7.24 0.32.9 3.50 3.50 6.68 6.68 6.68 ody 7.94. 4.29 4.29 20.65 20.65 20.65 4.29 7.46 20.64 20.64 27.00 27.00 27.00 icro 90 lbow (O) /8 26 46 66 86 26 3.8 2.70 0.7.24 0.32 0.32.9 3.50 6.68 ody 7.94 7.94. 4.29 20.65 4.29 4.29 7.46 20.64 27.00 icro xtended eg 90 lbow (O) 4X 2.30 7.38.43 ody. icro 45 lbow (O) /8 2H6 4H6 6H6 8H6 2H6 3.8 2.70 0.7.24 0.32 0.32.9 3.50 6.68 ody 7.94 7.94. 4.29 20.65.96.96 4.2 6.46 20.95 imensions are for reference only and are subject to change. Super Clean itting Series 7
W IINGS imensions / Information icro ee (O) /8 26 46 66 86 26 3.8 2.70 0.7.24 0.32 0.32.9 3.50 6.68 ody 7.94 7.94. 4.29 20.65 20.64 20.64 23.8 33.35 icro Reducing ee (O) (O) /8 4 26 6 46 8 46 8 66 2 46 2 66 2 86 2.70 2.70 3.8 2.70.24.24 0.7.24 0.32.9 3.50 3.50 6.68 6.68 6.68 ody 7.94. 4.29 4.29 20.65 20.65 20.65 20.64 23.8 27.00 27.00 27.00 icro Cross (O) /8 2C6 4C6 6C6 8C6 2C6 3.8 2.70 0.7.24 0.32 0.32.9 3.50 6.68 ody 7.94 7.94. 4.29 20.65 20.64 20.64 23.8 33.35 icro ribow (O) /8 26 46 66 86 26 3.8 2.70 0.7.24 0.32 0.32.9 3.50 6.68 ody 7.94 7.94. 4.29 20.65 4.29 4.29 7.46 20.64 27.00 imensions are for reference only and are subject to change. 8 Super Clean itting Series
SC ivision of K corporation ICRO W IINGS orged Weld ittings 90 lbow (O) 49 69 89 29 222 69 624 40 60 80 20 60 2.70 2.70.24.24 0 0 29.00 3.50 33.50 34.00 39.00 5.90 5.90 9.90 22.40 24.95 22.50 24.50 0.00 0.00 0.00 0.00 0.00 ody.2.2 7.5 29.9 29.0.2.2 7.5 29.9 Reducing 90 lbow (O) (O) 6 49 8 49 8 69 2 49 2 69 2 89 6 49 6 89 6 29 2.70 2.70 2.70 2.70.24.24.24.24 29.0 29.0 3.5 3.5 3.5 34.0 34.0 34.0 ody.2 7.5 7.5 29.9 29.9 29.9 ee (O) 49 69 89 29 222 69 624 40 60 80 20 60 ody 0.2 50.0 0.2 50.0 2.70.24 29.00 7.5 58.0 3.50 63.0 33.50 22.50 67.0 34.00 29.9 68.0 39.00 24.50 29.0 78.0 5.90 0.00.2 3.8 5.90 0.00.2 3.8 2.70.24 9.90 0.00 7.5 39.8 22.40 0.00 44.8 24.95 0.00 29.9 49.9 imensions are for reference only and are subject to change. Super Clean itting Series 9
W IINGS imensions / Information Reducing ee (O) (O) 6 49 8 49 8 69 2 49 2 69 2 89 6 49 6 89 6 29 6 40 8 40 8 60 2 40 2 60 2.70 2.70 2.70 2.70 2.70 2.70.24.24.24.24.24.24 29.0 29.0 3.5 3.5 3.5 34.0 34.0 34.0 5.9 9.9 9.9 22.4 22.4 0.00 0.00 0.00 0.00 0.00 ody.2 7.5 7.5 29.9 29.9 29.9.2 7.5 7.5 50.0 58.0 58.0 63.0 63.0 63.0 68.0 68.0 68.0 3.8 39.8 39.8 44.8 44.8 Cross ee (O) 4C9 6C9 8C9 2C9 6C9 4C0 6C0 8C0 2C0 6C0 ody 0.2 50.0 0.2 50.0 2.70.24 29.00 7.5 58.0 3.50 63.0 34.00 29.9 68.0 5.90 0.00.2 3.8 5.90 0.00.2 3.8 2.70.24 9.90 0.00 7.5 39.8 22.40 0.00 44.8 24.95 0.00 29.9 49.9 Reducer (O) (O) 6 4R9 8 4R9 8 6R9 2 4R9 2 6R9 2 8R9 6 4R9 6 6R9 6 8R9 6 2R9 6 4R0 8 4R0 8 6R0 2 4R0 2 6R0 2 8R0 2.70 2.70 2.70 2.70 2.70 2.70 2.70.24.24.24.24.24.24.24 0.00 0.00 0.00 0.00 0.00 0.00 38. 38. 38. 42.9 42.9 42.9 42.9 42.9 42.9 42.9 20.0 20.0 20.0 20.0 20.0 20.0 imensions are for reference only and are subject to change. 0 Super Clean itting Series
C S IINGS Glands Welded ssemblies Gaskets Nuts, Caps and Plugs High-low Connections - H ype High-Purity Nickel and Hastelloy C-22 glands for extremely corrosive applications. Non-Rotational emale Nut to prevent transmission of torque during make-up and therefore minimize twist of component which causes stress concentration. aterials Some Configuration Glands, odies aterial esignator pplicable Specification Gaskets aterial esignator pplicable Specification 36 stainless steel Single elt 36 VR(Vacuum rc Remelting) stainless steel ouble elt S bar stock : S S479, S 276 forgings : S 82 bar stock : S S479, S 276 forgings : S 82 Nickel Silver plated nickel 36 stainless steel Silver plated 36 stainless steel UN SN US SS S 62 S 62 S 67 S 67 Specitications Pressure Ratings are based upon tests conducted using S assemblies. ll ratings comply with calculations per NSI Code for Pressure Piping 3.3. Working Pressures are rated at ambient temperature and are based on a 4 to design factor. o determine pressure ratings in accordance with NSI 3. multiply Working Pressures by 0.94. emperature Ratings ittings: Stainless Steel 36, 36 000 (537 ) Gaskets: High-Purity Nickel 600 (35 ) Stainless Steel 000 (537 ) imensions are for reference only and are subject to change Plating emale nuts are silver plated. void chemical processes used for cleaning, electropolishing, and passivation that will remove plating. If the plating is damage or removed, thread galling may occur, damaging fitting components and preventing a proper seal. esting products are rated to a Helium leak rate of 0-9 atm cc/sec. Internal Surface inishes: components are available with controlled surface finishes and electropolished intemal surfaces. Cleaning and Packaging: Ultra-High Purity cleaning and packaging in a Class 00 Clean Room environment validated per ederal Standard 209, is standard for all electropolished components. esignator P Surface inish(ry) aximum 0.7 3.0 ypical ace Seal ittings emale Nut Gland Gasket Gland ale Nut Super Clean itting Series
C S IINGS imensions / Information Glands emale Gland ube /8 /8 NS : VI NU SIZ 2SG9 4SG6 4SG0 4SG9 6SG6 6SG0 6SG9 8SG6 8SG0 8SG9 2SG9 6SG9 8 4SG6 8 4SG0 8 4SG9 3.8 2.70 2.70 2.70 0.70.24.24.24 0.00 0.00 0.00 0.00 27.40 5.24 8.89 27.94 5.75 9.40 28.45 5.75 9.40 28.45 34.50 38.60 5.75 9.40 28.45 NS (Inch) /8 ale Gland ube /8 /8 NS : VI NU SIZ 2G9 4G6 4G0 4G9 6G6 6G0 6G9 8G6 8G0 8G9 2G9 6G9 8 4G6 8 4G0 8 4G9 3.8 2.70 2.70 2.70 0.70.24.24.24 0.00 0.00 0.00 0.00 36.00 30.48 34.3 43.8 32.77 36.42 45.47 32.77 36.42 45.47 5.56 58.93 32.77 36.42 45.47 NS (Inch) /8 W emale ong Gland ube NS : VI NU SIZ 4SG9 6SG9 8SG9 8 4SG9 0.5.0 0.5 0.22 28.5 29.2 29.5 29.5 x 7.4 0.4 4.0 7.4 W ale ong Gland ube NS : VI NU SIZ 4G9 6G9 8G9 2G9 6G9 8 4G9 24.40 0.50 0.75 0.50 0.22 5.75 22.0 43.70 46.25 46.50 52.60 65.30 46.20 x 7.4 0.4 4.0 20. 26.9 7.4 imensions are for reference only and are subject to change. 2 Super Clean itting Series
SC ivision of K corporation C S IINGS Socket Weld Short Gland Socket x 4SWSG 7. 2.7 8.9 Socket Weld ong Gland Socket /8 /8 2SWG 4SWG 6SWG 8SWG 2SWG 6SWG x 2.5 7. 7.9 9.6.2 5.7 2.30 0.22 5.75 22.0 7.8 33.3 38. 38. 5 56.4 5. 8.9 5.2 5.2 22.4 30.2 Socket Weld Reducing ong Gland Socket /8 4 2SWG 8 4SWG 2.5 7. 2.30 33.3 38. x 8.9 5.2 lind Gland /8 2G 4G 8G 7.8 33.3 38. 2G 6G 5 56.4 ale Weld Gland ube /8 /8 2G 4G 6G 8G 3.8 2.70.5 3.0 7. 0.2 7. 0.4 0.4 2.7 7.8 33.3 38. 38. NS (Inch) /8 ube dapter ube 4 6 8 2.70 4.3 6.8 9.4 6.2 7.8 24.4 4.0 46.0 49.3 NS (Inch) imensions are for reference only and are subject to change. Super Clean itting Series 3
C S IINGS imensions / Information ouble ale Union /8 2U 4U 8U 2U 6U 2.30 0.22 5.75 22.0 28.70 39.37 46.74 6.98 65.79 lat 9.52 5.88 23.8 33.34 4.28 5/6-24 UN 9/6-8 UN 7/8-4 UN -8 UN -2OUN ouble ale Reducing Union /8 4 2U 8 4U lat 2.30 5.88 34.8 9/6-8 UN 5/6-24 UN 0.22 23.8 43.4 7/8-4 UN 9/6-8 UN ulkhead Union 4H 8H 2H 6H 0.22 5.75 22.0 33.00 37.60 43.40 47.0 56.60 65.25 79.00 86.00 lat 26.90 38.0 44.40 lat 26.90 38.0 44.40 9/6-8 UN 7/8-4 UN -8 UN -2OUN W ody ube 4Y9 6Y9 8Y9 2Y9 2.70 0.22 0.22 5.75 42.65 46.70 46.70 55.55 lat 5.88 23.8 23.8 33.34 9/6-8 UN 7/8-4 UN 7/8-4 UN -8 UN W ulkhead Connector ube 4HY 8HY 2HY 2.70 0.22 5.75 33.00 37.60 43.25 59.85 65.25 7.30 lat 26.90 38.0 lat 26.90 38.0 9/6-8 UN 7/8-4 UN -8 UN Coupling /8 2CG 4CG 8CG lat. 26.98 6.8 30.2 33.3 2CG 6CG lat 38.0 44.45 42.7 5.8 imensions are for reference only and are subject to change. 4 Super Clean itting Series
SC ivision of K corporation C S IINGS ouble emale Reducing Union /8 4 2U 8 4U 3.3 6.4 lat 5.88 26.98 9. 8.9 29.5 35.8 Reducing dapter /8 2 4R 4 8R lat 2.3 7.5 30.2 4.6 26.98 2.6 35.8 5/6-24 UN 9/6-8 UN Reducing ushing /8 4 2R 8 4R lat 3.3 9.3 26.9 6.4 23.8 23. 35.8 9/6-8 UN 7/8-4 UN ale lbow (P) P SIZ 4-X32 6-X32 8-X32 2-X32 0.22 0.22 5.75 27.8 36.83 36.83 48.80 27.8 32.00 36.83 43.50 ody 5.9 23.8 23.8 33.3 9/6-8 UN 7/8-4 UN 7/8-4 UN -8 UN ale lbow (NP) NP SIZ 4 6 8 2 0.22 0.22 5.75 27.8 36.83 36.83 48.80 27.8 32.00 36.83 43.50 ody 5.9 23.8 23.8 33.3 9/6-8 UN 7/8-4 UN 7/8-4 UN -8 UN imensions are for reference only and are subject to change. Super Clean itting Series 5
C S IINGS imensions / Information Union lbow 4U 8U 2U 6U 0.22 5.75 22.0 27.8 36.83 48.77 50 ody 5.9 23.8 33.3 42.2 9/6-8 UN 7/8-4 UN -8 UN -2OUN Union ee 4U 8U 2U 6U 0.22 5.75 22.0 27.8 36.83 48.77 50 54.36 73.66 97.54 0.60 ody 5.9 23.8 33.3 42.2 9/6-8 UN 7/8-4 UN -8 UN -2OUN Union Cross 4UC 8UC 2UC 6UC 0.22 5.75 22.0 27.8 36.83 48.77 50 54.36 73.66 97.54 0.60 ody 5.9 23.8 33.3 42.2 9/6-8 UN 7/8-4 UN -8 UN -2OUN ube itting Connector ube /8 4X2CK 4CK 6CK 8CK C 5.20 7.80 9.30 2.80 2.70 5.20 6.80 22.90 0.22 0.22 lat 5.90 5.90 23.8 23.8 G lat. 4.29 7.46 22.23 H 38.9 4. 46.7 49.5 /8 9/6-8 UN 9/6-8 UN 7/8-4 UN 7/8-4 UN imensions are for reference only and are subject to change. 6 Super Clean itting Series
SC ivision of K corporation C S IINGS ube itting ulkhead Connector ube 4HCK 6HCK 8HCK 33.5 36.8 4.9 5.20 6.80 22.90 0.22 lat 5.87 23.8 23.8 lat 5.87 23.8 G lat 4.28 7.46 22.22 57.2 64.5 69.6 9/6-8 UN 7/8-4 UN 7/8-4 UN ale ulkhead Connector(NP) NP 4HC 8 4HC 5.7 9. 4.2 4.2 0.22 7. 7. lat 20.63 23.8 lat 20.63 20.63 3.5 3.5 56. 59.4 9/6-8 UN 7/8-4 UN ale Connector(P) /8 P SIZ /8 /8 2C-X32 4X2C-X32 4C-X32 8X4C-X32 6C-X32 8C-X32 2C-X32 6C-X32 2.30 0.22 0.22 5.75 22.0 9.60 9.60 4.22 4.22 4.22 23.88 27.20 33.30 37.84 4.87 4.87 46.74 55.63 62.74 lat. 5.90 5.90 23.80 23.80 23.80 33.30 42.20 5/6-24 UN 9/6-8 UN 9/6-8 UN 7/8-4 UN 7/8-4 UN 7/8-4 UN -8 UN -2OUN ale Connector(NP) /8 NP SIZ /8 /8 2C 4X2C 4C 8X4C 6C 8C 2C 6C 2.30 0.22 0.22 5.75 22.0 9.60 9.60 4.22 4.22 4.22 23.88 27.20 33.30 37.84 4.87 4.87 46.74 55.63 62.74 lat. 5.90 5.90 23.80 23.80 23.80 33.30 42.20 5/6-24 UN-2 9/6-8 UN 9/6-8 UN 7/8-4 UN 7/8-4 UN 7/8-4 UN -8 UN -2OUN ale Connector(S) S SIZ 9/6-8 UN 7/8-4 UN 9/6-8 UN 3/6-2 UN 4CS 8CS 8X4CS 2CS 0.22 0.22 5.75 9.9 2.7 9.9 5.0 33.80 42.20 37.60 5.50 lat 23.80 34.90 9/6-8 UN 7/8-4 UN 7/8-4 UN -8 UN UNIOR O-Ring -906-90 -906-92 imensions are for reference only and are subject to change. Super Clean itting Series 7
C S IINGS imensions / Information emale Connector(P) /8 P SIZ /8 /8 2C-X32 4X2C-X32 4C-X32 6C-X32 8C-X32 2C-X32 6C-X32 2.30 0.22 5.75 22.0 lat 4.28 5.90 23.8 26.98 33.33 4.27 30.20 35.80 39.0 44.70 50.50 59.90 63.80 5/6-24 UN 9/6-8 UN 9/6-8 UN 7/8-4 UN 7/8-4 UN -8 UN -2 OUN emale Connector(NP) NP SIZ /8 /8 /8 2C 4X2C 4C 6C 8C 2C 6C 2.30 0.22 5.75 22.0 lat 4.28 5.90 23.8 26.98 33.33 4.27 30.20 35.80 39.0 44.70 50.50 59.90 63.80 5/6-24 UN 9/6-8 UN 9/6-8 UN 7/8-4 UN 7/8-4 UN -8 UN -2 OUN Gaskets Gasket Retainer ssembly 4GR 8GR 2GR 6GR 5.6.2 6.7 22.6 x.85 9.27 27.90 34.20 Gasket /8 2G 4G 8G 2G 6G 2.3 5.6.2 6.7 22.6 x 6.6 2.7 9.8 29.0 35.8 lind Gasket 4G 8G 2G 6G.9 9.8 28.9 35.5 imensions are for reference only and are subject to change. 8 Super Clean itting Series
SC ivision of K corporation C S IINGS Nuts, Caps, and Plugs emale Nut /8 2N 4N 8N 2N 6N 3.5 20.5 22.3 28.4 34.0 * aterial - S: 36 Stainless Steel SS: 36 Stainless Steel lat. 38.0 44.45 x 5.30 9.0 5.50 22.60 30.50 5/6-24 UN 9/6-8 UN 7/8-4 UN -8 UN -2OUN ale Nut /8 2N 4N 4NS 8N 2N 6N 2.7 8.0 3.7 20.5 25.4 30.2 * 4NS : Short ale Nut Only * aterial - S: 36 Stainless Steel SS: 36 Stainless Steel 8.2.0.0 2.7 6.0 20.0 lat 9.52 5.88 5.88 23.8 33.34 4.28 x 5.30 9.0 9.0 5.50 22.60 30.50 5/6-24 UN 9/6-8 UN 9/6-8 UN 7/8-4 UN -8 UN -2OUN Plug /8 2PG 4PG 8PG 2PG 6PG 7.30 23.37 27.43 36.32 38.6 lat 9.52 5.88 23.8 33.34 4.28 5/6-24 UN 9/6-8 UN 7/8-4 UN -8 UN -2OUN Cap /8 2CP 4CP 8CP 2CP 6CP 6.00 24.20 25.50 32.77 39.2 7.60.8.43 3.72 6.00 lat. 38.0 44.45 5/6-24 UN 9/6-8 UN 7/8-4 UN -8 UN -2OUN imensions are for reference only and are subject to change. Super Clean itting Series 9
C S IINGS imensions / Information Plug (Cable ype) 4PG-C 8PG-C 5.88 23.8 H 23.37 27.43 Cable ength 260 260 High-low Connection - H ype HS emale Nut lat x 4HN 20.57 9.90 9/6-8 UN HS ale Nut lat x 4HN.0 8.03 5.88 9.9 9/6-8 UN HS ong Gland ube 6 4HG 28.4 33.2 7.5 6.28 HS W ody ube 4 6HY lat 7.5 5.8 5.87 42.75 9/6-8 UN imensions are for reference only and are subject to change. 20 Super Clean itting Series
SC ivision of K corporation C S IINGS HS W ody ube 4 6HY lat x 5.8 7.9 5.87 43.35 0.4 9/6-8 UN HS ulkhead Connector ube 4 6HHY lat lat 7.5 33.0 59.85 9/6-8 UN Welded ssemblies Welded ale Connector(P) P SIZ /8 4X2WC-X32 4WC-X32 6WC-X32 8WC-X32 0.22 lat. 4.29 7.46 22.23 G lat 40. 45.5 48.0 53. 2 24. 23.4 25.4 25.6 Welded ale Connector(NP) NP SIZ /8 4X2WC 4WC 6WC 8WC 0.22 lat. 4.29 7.46 22.23 G lat 40. 45.5 48.0 53. 2 24. 23.4 25.4 25.6 Welded emale Connector(P) P SIZ 4C-X32 6C-X32 8C-X32 0.22 lat 22.23 G lat 45.0 49.5 55.4 2 23.4 26.9 26.4 imensions are for reference only and are subject to change. Super Clean itting Series 2
C S IINGS imensions / Information Welded emale Connector(NP) NP SIZ lat G lat 2 4C 6C 8C 0.22 22.23 45.0 49.5 55.4 23.4 26.9 26.4 Welded ok Connector ube 4WC 6WC 8WC G G C lat lat lat 7.78 9.30 2.84 5.24 6.76 22.86 0.22 2.70 5.88 20.64 9 9 26 7 9 9 49.28 50.04 56.64 Welded emale Union G lat 4WU 8WU 43.4 46.7 emale lbow Union Welded ssembly emale ee Union Welded ssembly / 4UW / 4UW imensions are for reference only and are subject to change. 22 Super Clean itting Series
amage to the sealing beads may affect the fitting performance. protective cap is placed on all ace Seal itting sealing beads to prevent nicks or scratches. Keep this cap in place during storage and handling and only remove prior to assembly. Retainer ssembly Step When using a gasket retainer assembly, axially press the assembly onto the gland as shown. he retainer assembly will locate the gasket over the bead and hold it in place. e careful not to scratch or nick the bead as this may affect fitting performance. Proceed to Step 2 Non - Retainer ssembly Step Place gasket into female nut. Step 2 ssemble components and snug to fingertight. Step 3 Scribe the hex flat of both the male and female Step 4 Holding the backup wrench stationary, tighten the female nut /8 turn past fingertight. Warning: xtreme over tightening will damage toroid surface and cause potential leakage. Non - Retainer ssembly Protective Cap Removing ace Seal in an assembled system requires minimal clearance. o disassemble a face seal connection, hold the male nut or body hex stationary with a backup wrench and loosen the female nut. fter removing the components, be sure to protect the sealing beads with protective caps or gasket retainer assemblies. Super Clean itting Series 23
K SC IINGS Weld ittings / etal Seal ittings SC ivision