Page(s) 1 2 3 3 4 4 5 5 6 PRICE SHEET TABLE OF CONTENTS VALVES & HYDRANTS ( Replaces PL-1014-VLV) Product Line C515 NRS Gate Valves Series 1010 UL/FM C515 NRS Gate Valves Series 2010 C508 Swing Check Valves & Parts Series 7700 & 7700LW C508 Resilient Disc Check Valve & Parts Series 9600 C504 Butterfly Valves (MJ & Flanged Ends) Series 3900 C502 Fireflo Fire Hydrant & Parts Series F06 C503 Fireflo Fire Hydrant & Parts Series F08 Bell Restraints (PVC Pipe) Series 6190 Gear, OP Nut, Handwheel & Misc Parts Series 1010 & 2010 Gate Valves Price Sheet Multiplier Phone: 800-807-2215 Fax: 800-807-2214 For More Information on all of our Product Lines Visit us online at www.napacinc.com Worcester, MA (HQ) Jacksonville, FL
Terms & Conditions WARRANTY All orders are subject to approval and acceptance by NAPAC, Incorporated (herein referred to as NAPAC ). NAPAC warrants its products to have no defects in workmanship and materials used under normal service and when used for the purposes and under the conditions for which they are designed, for a period of one year from the date of shipment. No claims will be honored unless claim is made within (45) days of the defect being found. Obligation under the warranty is limited, at NAPAC s option, to adjust, repair or replace, F.O.B. point to sale, the defective parts. Purchaser must immediately notify NAPAC. NAPAC shall have the right to inspect said product and purchaser shall, if requested, assume all responsibility and expenses for removal and reinstallation and freight charges in connection with the foregoing remedy. NAPAC shall not be liable for indirect, special, incidental or consequential damage or penalties and does not assume any liability of purchase to others, or to anyone for injury to persons or property. Sellers Warranty shall be strictly limited to repair or replacement of the merchandise found to be defective. INSURANCE All merchandise shipped to the buyer shall be done so with the buyer assuming the risk of loss or damage during transit. Insurance, if desired, shall be the responsibility of the buyer. NAPAC will make every effort to make delivery without a time specified. Any delay in meeting shipping schedules will not make NAPAC liable for the damages of any kind. 1 CREDIT In consideration of extending credit, the buyer authorizes the seller to investigate references and obtain credit reports. The buyer agrees to pay for all merchandise signed for by its employees and/or agents until seller is otherwise notified in writing. The buyer agrees to pay interest at the rate of 18% per annum on past due accounts along with reasonable attorney fees and other costs of collection incurred by seller in collecting overdue accounts. RETURNS All sales are considered final at seller s opinion. If consent to make returns is granted, a 25% fee for restocking will be charged against any credit given. Buyer is responsible for all freight charges on returns. PRICING All prices are exclusive of taxes. Buyer is liable for any taxes, fees, or penalties levied. Buyer shall furnish seller a copy of their resale certificate. All material will be invoiced at prices in effect on date of shipment. Prices are subject to change without notice. All sales are F.O.B. point of shipping. Any damage or shortage must be noted on delivery bill of lading or our packing list and acknowledged by delivering carrier s agent. Any claims for damage or shortage must be made in writing within 7 days of receipt of material. Customer satisfaction is our priority. Please make your claims for adjustments within 10 days. Defective merchandise will be replaced or credited as applicable. SPECIAL ORDERS Orders concerning special or non-standard products (once ordered) are not subject to cancellation and cannot be returned to seller. Product modified by customer cannot be returned as well.
Price Sheet VL-0418- Valves C515 GATE VALVES SERIES 1010 - NRS Gate Valves Ductile Iron Body - Resilient Seated - NSF 61 FBE - Lead Free - less Accessories MECHANICAL JOINT ENDS FLANGED ENDS 2 1010MM-120* 33 $456.00 2 1010FF-120 33 $456.00 3 1010MM-130 42 $511.00 3 1010FF-130 42 $511.00 4 1010MM-140 61 $624.00 4 1010FF-140 61 $624.00 6 1010MM-160 124 $834.00 6 1010FF-160 124 $834.00 8 1010MM-180 197 $1,458.00 8 1010FF-180 197 $1,458.00 10 1010MM-200 266 $2,006.00 10 1010FF-200 266 $2,006.00 12 1010MM-220 394 $3,086.00 12 1010FF-220 394 $3,086.00 14 1010MM-240 596 $6,800.00 14 1010FF-240 596 $6,800.00 16 1010MM-260 660 $7,185.00 16 1010FF-260 660 $7,185.00 18 1010MM-280 968 $8,088.00 18 1010FF-280 968 $8,088.00 20 1010MM-300 1298 $12,550.00 20 1010FF-300 1298 $12,550.00 24 1010MM-340 1696 $23,555.00 24 1010FF-340 1696 $23,555.00 30 1010FF-400 4740 $44,500.00 36 1010FF-460 7937 $52,895.00 MECHANICAL x FLANGED ENDS MECHANICAL x FLANGED TAPPING 3 1010FM-130* 48 $511.00 3 1010TM-130* 48 P.O.A. 4 1010FM-140 60 $624.00 4 1010TM-140 60 $656.00 6 1010FM-160 105 $834.00 6 1010TM-160 105 $876.00 8 1010FM-180 165 $1,458.00 8 1010TM-180 165 $1,531.00 10 1010FM-200 272 $2,006.00 10 1010TM-200 272 $2,106.00 12 1010FM-220 364 $3,086.00 12 1010TM-220 364 $3,240.00 THREADED ENDS (IPS OD) PUSH-ON ENDS (IPS OD) 2 1010TT-120 15 $219.00 2 1010PO-120 28 P.O.A 2-1/2 1010TT-125 32 $315.00 2-1/2 1010PO-125 31 P.O.A 3 1010TT-130 34 $359.00 3 1010PO-130 44 P.O.A 4 1010TT-140 48 $492.00 4 1010PO-140 53 P.O.A *Use suffix "L" for open left or "R" for open right (i.e. 1010mm-120L) Fax: 1-800-807-2214 1 of 6 www.napacinc.com
Price Sheet VL-0418- Valves C515 GATE VALVES cont SERIES 2010 - NRS Gate Valves Ductile Iron Body - Resilient Seated - UL/FM NSF 61 FBE - Lead Free - less Accessories MECHANICAL JOINT ENDS FLANGED ENDS 2 2010MM-120* 32 $565.00 2 2010FF-120 33 $565.00 3 2010MM-130 44 $657.00 2-1/2 2010FF-125 38 $590.00 4 2010MM-140 55 $785.00 3 2010FF-130 44 $657.00 6 2010MM-160 95 $1,110.00 4 2010FF-140 60 $785.00 8 2010MM-180 150 $1,954.00 6 2010FF-160 102 $1,110.00 10 2010MM-200 249 $2,670.00 8 2010FF-180 155 $1,665.00 12 2010MM-220 331 $4,165.00 10 2010FF-200 232 $2,670.00 14 2010MM-240 463 $8,640.00 12 2010FF-220 351 $4,165.00 16 2010MM-260 582 $11,223.00 14 2010FF-240 529 $8,640.00 18 2010MM-280 860 $15,661.00 16 2010FF-260 684 $11,223.00 20 2010MM-300 1112 $19,954.00 18 2010FF-280 992 $15,661.00 24 2010MM-340 1609 $27,139.00 20 2010FF-300 1060 $19,954.00 24 2010FF-340 1812 $27,139.00 MECHANICAL x FLANGED ENDS MECHANICAL x FLANGED TAPPING 3 2010FM-130* 48 $657.00 3 2010TM-130 46 P.O.A 4 2010FM-140 60 $785.00 4 2010TM-140 60 $812.50 6 2010FM-160 105 $1,110.00 6 2010TM-160 105 $1,147.50 8 2010FM-180 165 $1,954.00 8 2010TM-180 165 $1,997.00 10 2010FM-200 272 $2,670.00 10 2010TM-200 272 $2,732.00 12 2010FM-220 364 $4,165.00 12 2010TM-220 364 $4,229.00 14 2010FM-240 582 $8,640.00 14 2010TM-240 582 $8,740.00 16 2010FM-260 751 $11,223.00 16 2010TM-260 751 $11,379.00 18 2010FM-280 1091 $15,661.00 18 2010TM-280 1091 $15,839.00 20 2010FM-300 1166 $19,954.00 20 2010TM-300 1166 $20,153.00 24 2010FM-340 1193 $27,139.00 24 2010TM-340 1193 $27,419.00 NOTE: Shaded areas currently non-stock. Please call for availability *Use suffix "L" for open left or "R" for open right (i.e. 2010MM-120L) Price Includes Flange Accessory Kit (Nuts, Bolts and Gasket) We also stock UL/FM Resilient Seated Fusion Bonded OS&Y and Post Indicator Valves (NSF61/NFS372) along with Indicator Posts, Check Valves, Butterfly Valves, Strainers & Coupings For further information, please contact our Sales Department at 800-807-2215 or sales@napacinc.com Fax: 1-800-807-2214 2 of 6 www.napacinc.com
Price Sheet VL-0418- Valves CHECK VALVES SERIES 7700 - Cast Iron Bodies Cast Iron Body - C508 - NSF 61 FBE - Lead Free - less Accessories FLANGED ENDS FLANGED ENDS - LEVER & WEIGHT 2 7700-120 32 $315.00 2 7700LW-120 42 $510.00 2-1/2 7700-125 42 $375.00 2-1/2 7700LW-125 51 $630.00 3 7700-130 56 $540.00 3 7700LW-130 70 $769.00 4 7700-140 86 $710.00 4 7700LW-140 111 $985.00 6 7700-160 106 $1,025.00 6 7700LW-160 165 $1,562.00 8 7700-180 270 $1,300.00 8 7700LW-180 320 $2,588.00 10 7700-200 480 $2,502.00 10 7700LW-200 570 $2,980.00 12 7700-220 625 $3,320.00 12 7700LW-220 720 $5,130.00 14 7700-240 1210 $11,486.00 14 7700LW-240 1272 $11,780.00 16 7700-260 1635 $18,238.00 16 7700LW-260 1721 $18,610.00 18 7700-280 1888 $22,340.00 18 7700LW-280 1988 $25,446.00 20 7700-300 2442 $26,340.00 20 7700LW-300 2570 $33,654.00 24 7700-340 3870 $36,570.00 24 7700LW-340 4074 $44,533.00 SPRING KIT w/mounting BOLT HANGER KITS - L&W CHECK VALVES 2 7700SMK-120 2 $37.40 4 7700LW-HMS-140 6 $192.50 2-1/2 7700SMK-125 2 $37.40 6 7700LW-HMS-160 12 $781.00 3 7700SMK-130 2 $37.40 8 7700LW-HMS-180 25 $1,294.00 4 7700SMK-140 2 $64.90 10 7700LW-HMS-200 39 $1,990.00 6 7700SMK-160 4 $63.80 12 7700LW-HMS-220 53 $2,565.50 8 7700SMK-180 4 $166.10 10 7700SMK-200 6 $195.80 12 7700SMK-220 8 $209.00 14 7700SMK-240 12 $377.30 16 7700SMK-260 15 $385.00 SERIES 9600 - Resilient Disc Check Valve Nylon Reinforced Rubber Encapsulated EPDM Disk - FBE Coated - Class 125 Flanged Ends Flanged Ends - EPDM Disk Flanged Ends - BUNA Disk 2 9600-120 27 $384.00 2 9600-120 27 $384.00 3 9600-130 40 $475.00 3 9600-130 40 $475.00 4 9600-140 68 $625.00 4 9600-140 68 $625.00 6 9600-160 128 $1,044.00 6 9600-160 128 $1,044.00 8 9600-180 238 $1,910.00 8 9600-180 238 $1,910.00 10 9600-200 380 $2,765.00 10 9600-200 380 $2,765.00 12 9600-220 620 $4,095.00 12 9600-220 620 $4,095.00 SERIES 9600 - Resilient Disc Check Valve (Parts) Replacement Disk - EPDM Rubber Replacement Disk - BUNA Disk 2 9600E-120 3 $114.70 2 9600B-120 3 $114.70 3 9600E-130 5 $150.35 3 9600B-130 5 $150.35 4 9600E-140 7 $221.65 4 9600B-140 7 $221.65 6 9600E-160 13 $398.35 6 9600B-160 13 $398.35 8 9600E-180 22 $666.50 8 9600B-180 22 $666.50 10 9600E-200 26 $736.25 10 9600B-200 26 $736.25 12 9600E-220 32 $754.85 12 9600B-220 32 $754.85 NOTE: Shaded areas currently non-stock. Please call for availability Fax: 1-800-807-2214 3 of 6 www.napacinc.com
Price Sheet VL-0418- Valves BUTTERFLY VALVES C504 Butterfly Valve Series 3900 - Cast Iron Body - Stainless Steel Disk - EPDM Seat Flanged Ends (w/lever or Wheel Handle) Mechanical Joint (w/gear Operator & Operating Nut) 4 3900FF-140 132 $837.25 4 3900MM-140 145 $862.75 6 3900FF-160 165 $858.50 6 3900MM-160 182 $918.00 8 3900FF-180 181 $1,062.50 8 3900MM-180 199 $1,147.50 10 3900FF-200 220 $1,415.25 10 3900MM-200 242 $1,557.20 12 3900FF-220 375 $1,973.70 12 3900MM-220 413 $2,509.20 14 3900FF-240 452 $2,643.50 14 3900MM-240 497 $3,983.10 16 3900FF-260 551 $3,650.75 16 3900MM-260 606 $4,590.00 18 3900FF-280 697 $4,535.75 18 3900MM-280 767 $6,165.05 20 3900FF-300 1005 $6,171.00 20 3900MM-300 1106 $7,609.20 24 3900FF-340 1373 $8,289.20 24 3900MM-340 1510 $9,759.70 C502 FIRE HYDRANT "FIREFLO" Fire Hydrants - Dry Barrel - MODEL F-06 5-1/4" 3-WAY VALVE OPENING - 2 HOSE NOZZLE & 1 PUMPER NOZZLE - UL/FM - Lead Free Fire Hydrants - Dry Barrel Fire Hydrant Extension Kits Ext Length 3'-0" F06-300* 415 $3,620.00 6" 464501-A 58 $358.00 3'-6" F06-306 435 $3,710.00 12" 464511-A 71 $418.00 4'-0" F06-400 445 $3,795.00 18" 464521-A 84 $476.00 4'-6" F06-406 475 $3,885.00 24" 464531-A 100 $537.00 5'-0" F06-500 495 $3,972.00 30" 464541-A 112 $608.00 5'-6" F06-506 515 $4,060.00 36" 464551-A 131 $676.00 6'-0" F06-600 535 $4,148.00 42" 464561-A 150 $887.00 6'-6" F06-606 575 $4,234.00 48" 464571-A 170 $1,010.00 7'-0" F06-700 625 $4,289.00 7'-6" F06-706 650 $5,615.00 *Use suffix "L" for Open Left or "R" for Open Right (i.e. F06-360-R) *Use suffix "x-mj" for MJ Shoe or "x-flg" for Flange Shoe (i.e. F06-306-L-MJ) "FIREFLO" Fire Hydrants - Repair Kits & Tools - MODEL F-06 "FIREFLO" FIRE HYDRANT - REPAIR KITS & TOOLS Hydrant Tools Hydrant Repair Kits Description Description F06-311 Operating Wrench $ 95.00 F06-301 Safety Flg Repair Kit $ 394.00 F06-317 Nozzle Lock Tool $ 55.00 F06-280-355 Bonnet Repair Kit P.O.A F06-359 Seat Removal Wrench $ 265.00 F06-280-357 Shoe Repair Kit P.O.A F06-367 Brass Sleeve $ 45.00 F06-280-359 Valve Repair Kit P.O.A F06-316-25 2.5" Nozzle Wrench $ 95.00 F06-316-45 4.5" Nozzle Wrench $ 120.00 Fax: 1-800-807-2214 4 of 6 www.napacinc.com
Price Sheet VL-0418- Valves C503 FIRE HYDRANT "FIREFLO" Fire Hydrants - Wet Barrel - MODEL F-08 UL/FM - Lead Free Two 4-1/2" Hose Nozzle & One 2-1/2" Pumper Nozzle Two 4-1/2" Hose Nozzle & One 2-1/2" Pumper Nozzle w/ 3" or 4" Monitor Flange 6" F08-3 150 $4,008.00 6" F08M-2HN-1PN 170 $4,748.00 One 4-1/2" Pumper Nozzle & One 2-1/2" Pumper Nozzle One 4-1/2" Hose Nozzle & One 2-1/2" Pumper Nozzle w/ 3" or 4" Monitor Flange 6" F08-1HN-1PN 160 $3,655.00 6" F08M-1HN-1PN 170 $4,395.00 Two 2-1/2" Hose Nozzle without Pumper Nozzle Two 2-1/2" Hose Nozzle without Pumper Nozzle and 3" or 4" Monitor Flange 6" F08-2NH 160 $3,575.00 6" F08M-2HN 170 $4,315.00 Check Valve Assembly - Wet Barrel Fire Hydrant Breakaway Traffic Kit 8800-06 160 $2,650.00 F08-301 42 $415.00 COUPLINGS, ADAPTERS & RESTRAINTS SERIES 6190-C - Bell Restraints Bell Restraints For C900 PVC Pipe 4 6190-04C 17 $59.00 6 6190-06C 18.5 $78.75 8 6190-08C 29 $127.75 10 6190-10C 53 $220.00 12 6190-12C 56.5 $243.00 14 6190-14C 136 $523.25 16 6190-16C 148 $590.00 18 6190-18C 222 $730.50 20 6190-20C 309 $1,000.75 24 6190-24C 380 $1,170.75 Fax: 1-800-807-2214 5 of 6 www.napacinc.com
Price Sheet VL-0418- Valves PARTS AND ACCESSORIES SERIES 1010 & 2010 Gate Valves Spur Gear Box Bevel Gear Box 8 4389-180-SPUR 780 $2,845.00 8 4379-180-BEVEL 780 $2,845.00 10 4389-200-SPUR 815 $2,972.00 10 4379-200-BEVEL 815 $2,972.00 12 4389-220-SPUR 815 $2,972.00 12 4379-220-BEVEL 815 $2,972.00 14 4389-240-SPUR 870 $3,165.00 14 4379-240-BEVEL 870 $3,165.00 16 4389-260-SPUR 870 $3,165.00 16 4379-260-BEVEL 870 $3,165.00 18 4389-280-SPUR 1030 $3,755.00 18 4379-280-BEVEL 1030 $3,755.00 20 4389-300-SPUR 1030 $3,755.00 20 4379-300-BEVEL 1030 $3,755.00 24 4389-340-SPUR 1145 $4,182.00 24 4379-340-BEVEL 1145 $4,182.00 2" Square Operating Nuts Wheel Handles or Hand wheels 2 xxxx-on-2 2 $41.00 2 xxxx-hwo-2 3 $205.00 3 ~ 4 xxxx-on-4 2 $41.00 3 ~ 4 xxxx-hwo-4 8 $235.00 6 xxxx-on-6 2 $51.00 6 xxxx-hwo-6 10 $290.00 8 ~ 12 xxxx-on-12 2 $61.00 8 xxxx-hwo-8 14 $390.00 14 ~ 16 xxxx-on-16 2 $61.00 10 ~ 12 xxxx-hwo-12 25 $575.00 18 ~ 24 xxxx-on-24 2 $95.00 14 ~ 16 xxxx-hwo-16 38 $975.00 18 ~ 24 xxxx-hwo-24 45 $1,360.00 For Parts on Series 2010 valves, prefix would be 2010-xx For Parts on Series 1010 valves, prefix would be 1010-xx We can also provide valves and fittings thru 72" in diameter and fabricated spool pieces, speciality flanges and packaged accessories thur 48" for your "just-in-time" needs. For further information, please contact our Sales Department at 800-807-2215 or sales@napacinc.com Fabricated Spool Pieces and Filler Flanges Compact Flange Reducers Flange Converter Class 125 to Class 250 Nuts, Bolts and Gaskets (Loose and Packaged) Fax: 1-800-807-2214 6 of 6 www.napacinc.com