TABLE OF CONTENTS PRODUCT PART # PAGE PRODUCT PART # PAGE

TABLE OF CONTENTS PRODUCT PART # PAGE CABINET LOCKS Pin Tumblers 0737 3 0738 3 0370B 4 Disc Tumblers 02067 4 Combination D900, D901 39 CAM LOCKS Pin Tumblers 15748, 15749, 15750 10 15783 & 15890 11 C-510-XS & C-510-S 12 C520L 12 Disc Tumblers 15751, 15752, 15753, 15760 13 15258 14 15259 14 15295D 15 C1091A 15 Cam Lock Accessories 16 Bent Cams 15714 17 15727A 17 Hook Cams K6L 17 15751A 17 15703N 17 Offset Cams C3S/C5S 17 C3L/C5L 17 C4S/C6S 17 C4L/C6L 17 15751E 17 Straight Cams C2S 17 C2L 17 S14509 17 15728 17 15751EA 17 15751EB 17 15751EC 17 15751ED 17 CAM LOCKS - KEYLESS COMBINATION CK2113, CK3113, CK4113 45 CATCHES CATCHES-DRAW PULL 834, 834S, 834U 27 824 28 804 28 641, 642, 643, 643W 29 794 30 797, 0797, 797W 30 798 31 250, 250W 31 CATCHES-MULTIPURPOSE SUITCASE 1771 32 1778 32 CHEST LOCKS Pin Tumblers 0168 10 DISPLAY BOARDS 48 DRAWER LOCKS Pin Tumblers 0666 & 0666 1/2 5 02063 5 Disc Tumblers 02065 & 02065 1/2 6 02068 & 02068 1/2 6 02066 7 PRODUCT PART # PAGE ENCLOSURE LOCKS Pin Tumblers 15481 20 55481 20 Warded Construction R357SGS 20 R557SGS 20 Disc Tumblers 15767 & 15768 21 15867 & 15868 21 HANDLES 2506 22 2516 22 2504 23 Disc Tumblers 1000 Series 24 1001 Series 25 15766 26 HANDLES-PULL 3284 26 S14810 26 HUSKI PADLOCKS Disc Tumbler - Rekeyable 66 Series 41 66R, 66KR 41 KEY BLANKS 47 KEYING KITS & PARTS 46 PADLOCKS & CHAINS Pin Tumblers 95 42 178, 178A 42 904 Series 43 906 Series 44 PRESTOLOCK COMBINATION PADLOCKS SEARCHALERT COLLECTION K6430, K7400, K7470, K7450, K8470 Series 34 2402 35 2400 35 3470 36 4400 36 2405 36 2430 37 2470 37 2439 37 2340, 2350 38 2341, 2351 38 2620 38 2621 39 PRESTOLOCK COUNTERTOP DISPLAYS 40 SESAMEE PADLOCKS PCW-400 32 K436, K437, K440, K500 Series 33 AB410 33 SLIDING DOOR LOCKS Pin Tumblers 02290 8 02291 8 SLIDING DOOR LOCKS-PUSH & TURN Pin Tumblers 02293 9 Disc Tumblers 02069 9 SPECIAL PURPOSE LOCKS Disc Tumblers 2060N & 2060C 18 S2060NC & S2060GF 18 STRIKES 7S, 12S, 21S, 26S, 49S, 52S, 69S, 100S, 2540 19 SUPER SESAMEE TM PADLOCKS K636, K637, K646 Series 33

POLICY AND TERMS PATENT INDEMNITY We agree to defend any suit or proceeding brought against our customers so far as based on a claim that any of our products, or any part thereof, made solely to our specifications and furnished to our customer constitute an infringement of any U.S. Patent, if notified in writing and given authority, information and assistance at our expense for the defense of same, and we shall pay all damages and costs awarded therein against our customer. In case our products, or any part thereof, are in such suit to constitute infringement and their use as enjoined, we will at our expense and discretion, either procure for our customer the right to continue using the products or replace the same with non-infringing products, or modify them so they become non-infringing, or remove such products and refund the purchase price (less depreciation, prorated from the purchase date). The foregoing states our entire liability for patent infringement by our products or any part thereof. LIMITED WARRANTY We warrant our products against defects in workmanship, material or operation subject, of course, to ordinary wear and tear as it pertains to particular installations. However, we do not warrant against defects due to improper installation or failure to exercise normal maintenance, nor against the consequences of uses for which our products were not designed. Our only liability whether in tort, or in contract under this warranty or any express or implied warranty, is to repair or replace products which are returned to us, shipping charges prepaid, at the address below within one year after or delivery thereof to the original purchaser from us, and are determined by us to be defective. We expect that our customer will inspect these products upon receipt. If damage has resulted from shipment, or customer's only remedy is by claim against the carrier. Products will not be accepted for repair or replacement under this warranty unless we have given prior authorization for their return. Upon receipt of products returned for repair or replacement we will determine whether products qualify for repair or replacement under this warranty; if they do not, we will notify our customer of estimated costs of repair or replacement involved and will obtain authorization prior to proceeding. We have no liability to pay any costs of repairs performed by anyone other than us, unless in each instance we have given prior written approval of such repair in which case we will pay what we consider to be the reasonable cost thereof. CCL will warrant that at the time of delivery, its products will be free from defects in material and workmanship, and shall be liable only to the extent of replacement of locks. This warranty will NOT include labor or installation. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES. IMPLIED WARRANTIES SHALL BE LIMITED TO THE DURATION OF THE WARRANTY PERIOD OF THIS EXPRESS WARRANTY. WE SHALL UNDER NO CIRCUMSTANCES BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATIONS OF EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE. FREIGHT POLICY All goods are invoiced F.O.B. shipping point. When delivered to the transportation company, shipments become the property of the purchaser who assumes the risk of loss or damage in transit. COMPANY POLICY No CCL product or part can be returned for credit unless written or verbal authorization has been given in advance. Merchandise returned must be identified as to original date of purchase, purchase order number, and shipper's name and address. Service and handling charge is 25% of net billing price, except in case of defective parts. Merchandise returned in unsalable condition will not be acceptable. The return of obsolete, discontinued, modified, or special parts is not permissible. CCL reserves the right to charge for all work completed or materials purchased when an order is cancelled or reduced prior to shipment, where special or modified parts are involved. CCL reserves the right to assess an additional cancellation charge, other than the normal 25% handling charge, in the event the quantity cancelled is in excess of our normal stock requirements. Prices are subject to change in the event the purchaser receives original order quantity. CLAIMS: CCL will not be responsible for goods lost in transit. Purchaser is solely responsible for filing claims with the carrier for losses. Claims for shortages in shipment not chargeable to the carrier must be reported within ten (10) days from receipt of merchandise. FINISHING SYMBOLS US3 Bright Brass US26D Satin Chrome Plated US4 Satin Brass US2G Zinc Plated US10 Satin Bronze PS Plain Steel US14 Bright Nickel PSS Plain Stainless Steel US26 Bright Chrome Plated 2 CCL SECURITY PRODUCTS 800-733-8588 Fax: 847-537-1881 www.cclsecurity.com

CABINET LOCKS Pin Tumbler 0737 CABINET LOCK Pin Tumbler Can be Masterkeyed Keyways Available: R1 & CR Material: Pressure Cast Case, Brass Cylinder Operation: Bolt moves right and left for either hand door Strike: No. 2540, brass, US4 only, furnished only when ordered For Thickness of Material (A) Regular Key Brass Regular Also Available Changes Key Blank No. 7 8" 3/4", 1 1 8", 1 3 8" All Different 8618C SURFACE MOUNTING Part No/Cyl Length Stock ID No. MKYD US4 US26 US26D Qty. (lbs./ oz.) 0737 7/8" KD 00128 10 4/3 0737 7/8" KA - 4T37526 02708 10 4/3 0737 1 1/8" KA - 4T37526 02705 10 4/10 0737 3/4" * 0737 7/8" 0737 1 1/8" 0737 1 3/8" * Available in R1 keyway only. 0738 DRAWER LOCKS Pin Tumbler Can be Masterkeyed Keyways Available: R1 & CR Material: Pressure Cast Case, Brass Cylinder Operation: Bolt moves up and down Strike: No. 2540, brass, US4 only, furnished only when ordered For Thickness of Material (A) Regular Key Regular Also Available Changes Key Blank No. 7 8" 3/4", 1 1 8", 1 3 8" All Different 8618C SURFACE MOUNTING Part No/Cyl Length Stock ID No. MKYD US4 US26 US26D Qty. (lbs./ oz.) 0738 7/8" KD 00129 10 4/3 0738 7/8" KA - 4T37526 02704 10 4/3 0738 3/4" * 0738 7/8" 0738 1 1/8" 0738 1 3/8" * Available in R1 keyway only. Notes: Stock items are not shaded and are available in stock quantity units only. Use Stock ID No. when ordering stock items. Made-To-Order items are shaded. For explanation of finishing symbols, refer to Page 2. 3

CABINET LOCK Pin & Disc Tumbler 0370B CABINET LOCK Pin Tumbler Can be Masterkeyed Keyways Available: R1 Material: All brass Regularly furnished right hand. Left hand available if specified when ordered. Strike: No. 12S, brass US4 only, furnished only when ordered For Thickness of Material (A) Regular Key Regular Also Available Changes Key Blank No. 7 8" All Different 8618C-R1 (5 Pin) HALF MORTISE MOUNTING Part No/Cyl Length Stock ID No. MKYD US4* Qty. (lbs./ oz.) 0370B 7/8" * Minimum order 500 pieces 02067 CABINET LOCK Disc Tumbler Can be Masterkeyed Material: Brass Plated Steel Backplate & Bolt, Pressure Cast Cylinder Operation: Reversible for either hand door Rekeying: Plug removal access hole added to allow for removal of plug assembly for rekeying purposes. To remove plug, insert key and rotate 90 degrees. Insert end of small tool (e.g., paper clip) into access hole and depress retainer while pulling key and plug out. Strike: No. 7S, brass, US4 only, furnished only when ordered For Thickness of Material (A) Regular Key Masterkeyed Regular Also Available Changes Key Blank No. Key Changes Key Blank No. 7/8" 3 4", 1 1 8" 200 5865JVR (5 Disc) 180 5860KS (5 Disc) 700 8658JVR (6 Disc) 700 5861KS (6 Disc) SURFACE MOUNTING Part No/Cyl Length Stock ID No. MKYD US4 US26D Qty. (lbs./ oz.) 02067 3/4" KA - CAT30 02693 25 6/2 02067 7/8" KD 00171 25 6/2 02067 7/8" KA - CAT30 00173 25 6/2 02067 7/8" CAT60 02696 25 6/2 02067 7/8" AUE1 00172 25 6/2 02067 7/8" MKY M8003(KD) 02697 25 6/2 02067 7/8" KD 00174 25 6/2 02067 7/8" KA - CAT30 02694 25 6/2 02067 7/8" CAT60 02685 25 6/2 02067 1 1/8" KD 00177 25 6/13 02067 1/1/8" KA - CAT30 02700 25 6/13 02067 1 1/8" CAT60 02701 25 6/13 02067 1/1/8" KA - CAT30 02702 25 6/13 02067 3/4" 02067 7/8" 02067 1 1/8" 4 CCL SECURITY PRODUCTS 800-733-8588 Fax: 847-537-1881 www.cclsecurity.com

No. 0666 Dead Bolt 0666 & 0666 1/2 DRAWER LOCK Pin Tumbler Can be Masterkeyed No. 0666 1/2 Latch Bolt DRAWER LOCKS Pin Tumbler Keyways Available: R1 & CR Material: All Brass Strike: No. 12S, brass, US4 only, furnished only when ordered with lock 0666 Strike: No. 100S, brass, US4 only, regularly furnished with lock 0666 1/2. Key can be removed in either locked or unlocked position on 0666 only. For key retaining, specify 0666K on order. For Thickness of Material (A) Regular Key Regular Also Available Changes Key Blank No. 7 8" 1 1 8" All Different 8618C-R1 (5 Pin) 3 4" All Different 8632C-R1 (4 Pin) Part No/Cyl Length Stock ID No. MKYD US4 US26D Qty. (lbs./ oz.) 0666 7/8" KD 00124 10 3/3 0666 7/8" KA - 4T37526 02698 10 3/3 0666 7/8" 0666 1/2-7/8" KD 00125 10 3/3 0666 1/2-7/8" KA - 4T37526 02706 10 3/3 0666 1/2-7/8" * Minimum order 250 pieces (R1 keyway only) ** Minimum order 1000 pieces 02063 DRAWER LOCK Pin Tumbler Can be Masterkeyed Keyways Available: R1 & CR Material: Pressure Cast Case, Steel Backplate and Bolt, Brass Cylinder and Plug If longer bolt is required, specify 02063A (Bolt length unlocked: 1 1/8" from centerline of lock to end) Strike: No. 7S, brass, US4 only, furnished only when ordered For Thickness of Material (A) Regular Key Regular Also Available Changes Key Blank No. 7 8" 1 1 8" All Different 8618C-R1 (5 Pin) SURFACE MOUNTING Part No/Cyl Length Stock ID No. MKYD US4 US26* US26D Qty. (lbs./ oz.) 02063 7/8" KD 02707 10 2/14 02063 7/8" KA 4T37526 02684 10 2/14 02063 7/8" 02063 1 1/8" 02063A 7/8" 02063A 1 1/8" * Minimum order 300 pieces Notes: Stock items are not shaded and are available in stock quantity units only. Use Stock ID No. when ordering stock items. Made-To-Order items are shaded. For explanation of finishing symbols, refer to Page 2. 5

DRAWER LOCKS Disc Tumbler 02065 & 02065 1 2 DRAWER LOCKS Disc Tumbler 7 8" Can be Masterkeyed, 11 8 Cannot be Masterkeyed* Material: Brass Plated Steel Backplate, Cylinder and Bolt, Pressure Cast Strike: No. 26S, brass, US4 only. Regularly furnished with locks 02068 1/2 and 02065 1/2. Strike: No. 7 S, brass, US4 only. F u rnished only when ord e red with locks 02068 a n d 0 2 0 6 5. Rekeying: No. 02065 Dead Bolt No. 02065 1/2 Latch Bolt Plug removal hole added to allow for removal of plug assembly for rekeying purposes. To remove plug, insert key and rotate 90 degrees. Insert end of small tool (e.g., paper clip) into access hole and depress retainer while pulling key and plug out. For Thickness of Material (A) Regular Key Regular Also Available Changes Key Blank No. 7 8" 1 1 8" 200 5865JVR (5 Disc) 1 1 8" 700 8658JVR (6 Disc) Part No/Cyl Length Stock ID No MKYD US4 US26D Qty. (lbs./ oz.) 02065 7/8" KD 00152 25 5/14 02065 7/8" KA - CAT30 02673 25 5/14 02065 7/8" AUE 1 00153 25 5/14 02065 7/8" KA - CAT30 02674 25 5/14 02065 1 1/8" KD 02675 25 6/8 K02065 7/8" Drawer Lock, KD, Carded 7/8" Length 00151 8 6/8 02065 7/8" 02065 1 1/8" * 02065 1/2" - 7/8" KD 00155 25 6/0 02065 1/2" - 7/8" KA - CAT30 02677 25 6/0 02065 1/2" - 7/8" AUE 1 02678 25 6/0 02065 1/2" - 7/8" KA - CAT30 02679 25 6/0 02065 1/2" - 7/8" 02065 1/2" - 1 1/8" * 02068 & 02068 1 2 DRAWER LOCKS Disc Tumbler Cannot be Masterkeyed* Refer to Top of Page for Strikes and Rekeying Information No. 02068 Dead Bolt Part No/Cyl Length Stock ID No MKYD US4 US26D Qty. (lbs./ oz.) 02068 7/8" KD 00180 25 6/13 02068 7/8" KA -CAT30 02686 25 6/13 02068 7/8", 1 1/8" * 02068 1/2-7/8" KD 02691 25 6/13 02068 1/2-7/8" KA -CAT30 02692 25 6/13 02068 1/2-7/8" * No. 02068 1/2 Latch Bolt SURFACE MOUNTING RECESSED MOUNTING 6 CCL SECURITY PRODUCTS 800-733-8588 Fax: 847-537-1881 www.cclsecurity.com

DRAWER LOCKS Disc Tumbler 02066 DRAWER LOCK Disc Tumbler Can be Masterkeyed Material: Brass Plated Steel Backplate and Bolt, Pressure Cast Cylinder If longer bolt is required, specify 02066B (Bolt length unlocked: 2" from centerline of lock to end) Gang lock S16596: 12" overall bolt length. Bolt extends from both ends of lock (Unlocked: 6.3" from top of lock; 4.2" from bottom of lock). Strike: No. 7S, brass, US4 only, furnished only when ordered For Thickness of Material (A) Regular Key Masterkeyed Regular Also Available Changes Key Blank No. Key Changes Key Blank No. 7 8" 3/4, 1 1 8" 200 5865JVR (5 Disc) 180 5860KS (5 Disc) 700 8658JVR (6 Disc) 700 5861KS (6 Disc) SURFACE MOUNTING Part No/Cyl Length Stock ID No. MKYD US4 US26D Qty. (lbs./ oz.) 02066 3/4" KD 00166 25 6/2 02066 3/4" KA - CAT30 02676 25 6/2 02066 3/4" AUE 1 00168 25 6/2 02066 3/4" KD 02681 25 6/2 02066 7/8" KD 00160 25 6/2 02066 7/8" KA - CAT30 00162 25 6/2 02066 7/8" CAT60 02680 25 6/2 02066 7/8" AUE 1 00161 25 6/2 02066 7/8" MKY M8003(KD) 00165 25 6/2 02066 7/8" KD 00163 25 6/2 02066 7/8" KA - CAT30 00164 25 6/2 02066 7/8" CAT60 02644 25 6/2 02066 1 1/8" KD 00169 25 6/13 02066 1 1/8" KA - CAT30 02687 25 6/13 02066 1 1/8" CAT60 02688 25 6/13 02066 1 1/8" KA - CAT30 02689 25 6/13 K02066 7/8" Drawer Lock, KA-CAT30, Carded 00157 8 6/13 02066 7/8" 02066 1 1/8" 02066B 7/8" 02066B 1 1/8" S16596 7/8" NOTES Notes: Stock items are not shaded and are available in stock quantity units only. Use Stock ID No. when ordering stock items. Made - To - Order items are shaded. For explanation of finishing symbols, refer to Page 2. 7

SLIDING DOOR LOCK Pin Tumbler 02290 SLIDING DOOR LOCK Pin Tumbler Can be Masterkeyed Keyways Available: R1 Material: All Brass Operation: Push bolt type. To lock, push end of cylinder. To unlock, use key. As regularly furnished, key is removable in locked or unlocked position. Strike: No. 02290S, brass, US4 only, regularly furnished For Thickness of Material (A) Regular Key Regular Also Available Changes Key Blank No. 7 8" All Different 5862C-R1 (3 Pin) Part No/Cyl Length Stock ID No. MKYD US4 US26* US26D Qty. (lbs./ oz.) 02290 7/8" * Minimum order 250 pieces 02291 SLIDING DOOR LOCK Pin Tumbler Can be Masterkeyed Keyways Available: R1 & CR Material: : All Brass Operation: Push bolt type. To lock, push end of cylinder. To unlock, use key. 02291A: Same as 02291 except key is used to BOTH lock and unlock the mechanism Strike: : No.02290S, brass, US4 only, regularly furnished For Thickness of Material (A) Regular Key Regular Also Available Changes Key Blank No. 7 8" 1 1 8", 1 3 8" All Different 8618C-R1 (5 Pin) Part No/Cyl Length Stock ID No MKYD US4 US26 US26D Qty. (lbs./ oz.) 02291 7/8" KD 00185 10 3/2 02291 7/8" KA - 4T37526 02652 10 3/2 02291 7/8" 4R64264 00186 10 3/2 02291 7/8" KA - 4T37526 02667 10 3/2 02291 7/8" 02291 1 1/8" 02291 1 3/8" * 02291A 7/8" * Minimum order 2000 pieces 8 CCL SECURITY PRODUCTS 800-733-8588 Fax: 847-537-1881 www.cclsecurity.com

PUSH & TURN SLIDING DOOR LOCK Pin & Disc Tumbler 02293 PUSH & TURN SLIDING DOOR LOCK Pin Tumbler Can be Masterkeyed Keyways Available: R1 Material: All Brass. Operation: To lock, push in cylinder and turn counter-clockwise with key. To unlock, turn clockwise with key. End of bolt locks behind strike, which prevents doors from being spread apart. For protection of doors, bolt is locked in both in and out positions. Key is removable in both locked and unlocked positions. Strike: No. 213F472, brass US4 only, regularly furnished For Thickness of Material (A) Regular Key Regular Also Available Changes Key Blank No. 7 8" 1 1 8", 1 3 8" All Different 8618C-R1 (5 Pin) Part No/Cyl Length Stock ID No. MKYD US4 US26 US26D Qty. (lbs./ oz.) 02293 7/8" 02293 1 1/8" * 02293 1 3/8" * * Minimum order 250 pieces STRIKE 02069 PUSH & TURN SLIDING DOOR LOCK Disc Tumbler Can be Masterkeyed, except for 11 8" cylinder Material: Brass Outside Cylinder, Pressure Cast Plug Operation: To lock, push in cylinder and turn counter-clockwise with key. To unlock, turn clockwise with key. End of bolt locks behind strike which prevents doors from being spread apart. For protection of doors, bolt is locked in either in or out position. Key is removable in locked and unlocked position. For key removal in locked position only, specify 02069K. Strike: No. 02069S, brass US4 only, regularly furnished For Thickness of Material (A) Regular Key Masterkeyed Regular Also Available Changes Key Blank No. Key Changes Key Blank No. 7/8" 1 1/8", 1 3/8" 200 5865JVR (5 Disc) 180 5860KS (5 Disc) 700 8658JVR (6 Disc) 700 5861KS (6 Disc) STRIKE Part No/Cyl Length Stock ID No. MKYD US4 US26D Qty. (lbs./ oz.) 02069 7/8" KD 02699 25 5/10 02069 7/8" KA - CAT30 02703 25 5/10 02069 7/8" 02069 1 1/8" 02069 1 3/8" * 02069K 7/8" 02069K 1 1/8" 02069K 1 3/8" * * Minimum order 250 pieces Notes: Stock items are not shaded and are available in stock quantity units only. Use Stock ID No. when ordering stock items. Made - To - Order items are shaded. For explanation of finishing symbols, refer to Page 2. 9

CHEST LOCKS Pin Tumbler 0168 CHEST LOCK Pin Tumbler Can be Masterkeyed Keyways Available: R1 & CR Material: All brass Hook Bolt: Not self locking, retracts when unlocked Strike: No. 12S, brass US4 only, regularly furnished 3/64 57/64 3/8 5/16 5 / 16 THROW 25/64 13/64 For Thickness of Material (A) Regular Key Regular Also Available Changes Key Blank No. 7 8" All Different 8618C-R1 (5 Pin) 3/4 C SUNK FOR No. 4 SCREWS 1 1 /4 1 19 /32 1 31 /32 29/32 7 / 8 A 1 1 /2 15/64 Part No/Cyl Length Stock ID No. MKYD US4 Qty. (lbs./ oz.) 0168 7/8" HALF MORTISE MOUNTING CAM LOCKS Pin Tumbler 15748, 15749, & 15750 CAM LOCKS Pin Tumbler Can be Masterkeyed Keyways Available: R1 & CR Material: Brass Key Blank No.: 8632C-R1 (4 pin) for 15748 8618C-R1 (5 pin) for 15749 8618C-R1 (5 pin) for 15750 Regular Key Changes: All different Cams: See dimension in table. Cams measured from center of plug to end of cam. Other cam options on Page 16. Cam Positions: Specify position when ordering. End of cylinder plug milled square and cams punched with square hole to allow cam to be applied in any one of four positions. Regular locked position for cam is at 12 o clock. Cam Rotation: Furnished with 90 degree rotation (12 o clock to 3 o clock standard). Key removable in locked position only. Cylinder: Slabbed on one side Strike: No. 2540, brass, US4 only, furnished only when ordered 7/8 B 1 B B1 0 3/4 1/8 A No.15748* No. 15749* No.15750* Distance Under Distance Under Distance Under Cam Cam Head to Cam Head to Cam Head to Cam No. Length B B 1 B 0 B B 1 B 0 B B 1 B 0 C2S 7 8" 5 8" 13 16" 1" C2L 1 1 4" 5 8" 13 16" 1" C3S 7 8" 1 2" 11 16" 7 8" C3L 1 1 4" 1 2" 11 16" 7 8" C4S 7 8" 3 8" 9 16" 3 4" C4L 1 1 4" 3 8" 9 16" 3 4" C5S 7 8" 3 4" 15 16" 1 1 8" C5L 1 1 4" 3 4" 15 16" 1 1 8" C6S 7 8" 7 8" 1 1 16" 1 1 4" C6L 1 1 4" 7 8" 1 1 16" 1 1 4" *Specify cam required on order, i.e. 15748 x C2S Part No/Cyl Length Stock ID No. MKYD US4 US14 US26D Qty (lbs./oz.) 15748 15749 15750.661.671.755.765 DIA. Mounting Cutout: "Single D" Standard cutout for RH & LH Pin Tumbler Cam Locks 10 CCL SECURITY PRODUCTS 800-733-8588 Fax: 847-537-1881 www.cclsecurity.com

CAM LOCKS Pin Tumbler 15783 & 15890 CAM LOCKS with LAZY CAM FUNCTION Pin Tumbler Can be Masterkeyed Keyways Available: R1 & CR Material: Brass Key Blank No.: 8618C - R1 (5-Pin) Cam Rotation: Furnished with 90 degree rotation clockwise from 12 to 3 o clock, 3 to 6 o clock, 6 to 9 o clock, or 9 to 12 o clock. Specify cam rotation on order. Operation: Lock operated by full turn of key. Key removable in locked or unlocked position. Can also be set so that key is removable in locked position only with 90 degree cam rotation. Cylinder: Slabbed on one side 7/8 1/8 B 1 B 1 3 /8 A No.15783* No. 15790* Distance Under Distance Under Cam Cam Head to Cam Head to Cam No. Length B B 1 B 0 B 205 1 3 16" 1" 1 5 16" 206 1 1 8" 25 32" 1 3 32" 207 1 1 8" 11 16" 1" 208 1 1 4" 9 16" 7 8" 209 1 7 16" 1" 1 5 16" 210 15 16" 29 32" 1 7 32" *Specify cam required on order, i.e., 15783 x 205. No. 15783 7/8 1/8 B 1 B A Part No/Cyl Length Stock ID No. MKYD US2G US14 US26D Qty. (lbs./ oz.) 15783 15890 205 206 207 208 209 210 5/8 1 11 /16 No. 15890 5/8 1 3 /16 1 1 /8 1 1 /8 1 1 /4 1 7 /16 15/16 205 206 207 208 209 210.661.671.755.765 DIA. Mounting Cutout: "Single D" Standard cutout for RH & LH Pin Tumbler Cam Locks Notes: Stock items are not shaded and are available in stock quantity units only. Use Stock ID No. when ordering stock items. Made - To - Order items are shaded. For explanation of finishing symbols, refer to Page 2. 11

CAM LOCKS Tubular Pin Tumbler Package Includes: (1) (7 Pin) cylinder (w / key pulls at 12, 3, and 9 positions) (2) keys (KA or KD) (1) Straight cam 1 1/8 (1) Straight cam 7/8 (1) Offset cam 1 1/8 (1/8 offset) C-510-XS & C-510-S DIE CAST / BRASS TUBULAR CAM LOCK PACKAGE Pin Tumbler (1) Offset cam 1 1/8 (1/4 offset) (1) 90 Degree stop cam (1) 180 Degree stop cam (1) cam securing hex nut (1) cam securing lock B 3 32 Material: Zinc die cast housing, brass plug and spindle Operation: Push key and turn to desired position for locking and unlocking. Key removeable at various locations depending on mounting configurations. Specifications: Tubular cam lock available with removeable style cam only. Engineered for use in metal or fiberglass products. Mechanism: 7 Pin tumbler mechanism utilizing a tubular key which offers over 750,000 combinations. 2,000 combinations available for stock locks. No. C-510-XS No. C-510-S Distance Distance B C E B C E 7/16 5/16 23/32 23/32 9/16 1 5/64 D 3 4 1 4 7 8 DIA. C E Part No/Cyl Length * Stock ID No. MKYD US26 Qty. (lbs./ oz.) BDB510XS KD 51000 25 6/5 BDB510XS KA0001 51001 25 6/5 BDB510XS KA0002 51002 25 6/5 BDB510XS KA0003 51003 25 6/5 BDB510XS KA0004 51004 25 6/5 BDB510S KD 51010 25 6/5 BDB510S KA0001 51011 25 6/5 BDB510S KA0002 51012 25 6/5 BDB510S KA0003 51013 25 6/5 BDB510S KA0004 51014 25 6/5 *Other keypulls and keying available with minimum quantity orders. Check with Customer Service. C520L DIE CAST / BRASS TUBULAR CAM LOCK PACKAGE Pin Tumbler Cannot be Masterkeyed Material: Zinc die cast Operation: Push key and turn 90 degrees to desired position for locking and unlocking. Key removeable at 12:00 position only. Specifications: Miniature tubular cam lock with removable style cam only. Engineered for use in metal or fiberglass products. Mechanism: 4 Pin tumbler mechanism utilizing a tubular key which offers 150 combinations. Package Includes: 1 1/8 Straight Cam 1 1/8 Offset 1 1/8 cam 13 32 5 32 B 1 16 No. C520L-KA601-2CAM-US26 No. C520L-KD-2CAM-US26 Distance Distance B C D E B C D E 5/8 9/16 1 1/8 7/8 5/8 9/16 1 1/8 7/8 D 19 32 DIA. C E.472 ±.002 DIA. Part No/Cyl Length Stock ID No. MKYD US26 Qty. (lbs./ oz.) C520L KA601-2CAM 52001 10.9/0 C520L KD-2CAM 52020 10.9/0.437 +.003 -.000 Recommended Application Hole Size 12 CCL SECURITY PRODUCTS 800-733-8588 Fax: 847-537-1881 www.cclsecurity.com

CAM LOCKS Disc Tumbler 7/8 19/32 THREAD LENGTH 7/8 B1 0 B B 1 1 9 /64 No.15752 B 1 B B1 0 1 5 /32 THREAD LENGTH 1 9 /16 3/4 No. 15760 A 7/8 13/32 THREAD LENGTH 7/8 3/4 B1 0 B B 1 15751, 15752, 15753, & 15760 CAM LOCKS Disc Tumbler Can be Masterkeyed Material: Pressure cast Regular Key Changes: 200 with key blank 5865JVR (5 disc), 700 with key blank 8658JVR (6 disc) 61/64 B 1 B1 0 B 3/4 THREAD LENGTH MOUNTING CUTOUT.640.650 A 1 21/64 3/4 No. 15751 No. 15753.755.765 DIA. 3/4 A A Masterkeyed Key Changes: 180 with key blank 5860KS (5 disc), 700 with key blank 5861KS (6 disc) Cams: See dimension in table. Cams measured from center of cylinder to end of cam. Other cam options on Page 16. Cam Positions: Regularly furnished with cam mounted at 12 o clock locked position. Cam may be mounted at 3, 6, 9, or 12 o clock locked position. Specify on order. Cam Rotation: Regular rotation 90 degrees from 12 to 9 o clock, key removable only in locked position at 12. Also available with 180 degree rotation from 12 to 6 o clock so key can be withdrawn in both locked and unlocked positions. Specify when ordering. Cylinder: Slabbed on both sides Clip: No. 15751 also available with Clip (Page 15). Specify No. C15751 for 18, 20, and 22 gauge metal. No.15751* No. 15752* No.15753* No.15760* Distance Under Distance Under Distance Under Distance Under Cam Cam Head to Cam Head to Cam Head to Cam Head to Cam No. Length B B 1 B 0 B B 1 B 0 B B 1 B 0 B B 1 B 0 C2S 7 8" 5 8" 13 16" 1" 1 1 4" C2L 1 1 4" 5 8" 13 16" 1" 1 1 4" C3S 7 8" 1 2" 11 16" 7 8" 1 1 8" C3L 1 1 4" 1 2" 11 16" 7 8" 1 1 8" C4S 7 8" 3 8" 9 16" 3 4" 1" C4L 1 1 4" 3 8" 9 16" 3 4" 1" C5S 7 8" 3 4" 15 16" 1 1 8" 1 3 8" C5L 1 1 4" 3 4" 15 16" 1 1 8" 1 3 8" C6S 7 8" 7 8" 1 1 16" 1 1 4" 1 1 2" C6L 1 1 4" 7 8" 1 1 16" 1 1 4" 1 1 2" *Specify cam required on order, i.e., 15751 x C2S. Part No/Cyl Length Stock ID No. MKYD US4 US26D Qty. (lbs./ oz.) 15751 B15751 KD 00218 25 5/9 B15751 KA - CAT30 00219 25 5/9 B15751 CAT60 02656 25 5/9 B15751 MKY M8003(KD) 02654 25 5/9 B15751 C15751 15752 B15752 KD 02645 25 5/9 B15752 KA - CAT30 02660 25 5/9 B15752 CAT60 02661 25 5/9 B15752 MKY M8003(KD) 02662 25 5/9 B15752 15753 15760 B15760 KD 00220 25 5/9 B15760 KA - CAT30 02908 25 5/9 B15760 CAT60 02659 25 5/9 B15760 AUE1 02664 25 5/9 B15760 MKY M8003(KD) 02665 25 5/9 B15760 K15760 Cam Lock, KD, Carded 00222 8 2/2 K15760A Cam Lock, KA - CAT30, Carded 00223 8 2/2 K15760 Carded K15760A KA - CAT30, Carded 121F428 180 Stop Cam 1 1 /4 9/16 1/4 C4L/C6L 1/4 Offset Cam 21/32 53/64.757 1/8.762 DIA. 1.632.637.035 230F248 Pronged Washer 231F558 Collar Ring Bulk Pack: B15751, B15752, & B15760 locks are individually polybagged in US26D, keyed different, keyed alike, and masterkeyed. Each lock is assembled with C2L cam, 12 to 9 rotation, and 2 keys. Accessories also included in polybag are shown at left. Notes: Stock items are not shaded and are available in stock quantity units only. Use Stock ID No. when ordering stock items. Made - To - Order items are shaded. For explanation of finishing symbols, refer to Page 2. 13

CAM LOCKS Disc Tumbler No. 15258 15258 CAM LOCK with SPUN-ON CAM Disc Tumbler Cannot be Masterkeyed Material: Pressure Cast Cams: See dimension in table. Cams measured from center of cylinder to end of cam. Cam cannot be removed. Other cam options on Page 16. Cam Positions: Regularly furnished with cam mounted in locked position at 12 o clock. Specify on order if different position required. Cam Rotation:Furnished with 90 or 180 degree rotation. Specify on order. (Regular rotation 90 degrees counter clockwise from 12 to 9 o clock). 180 degree stop cam allows key to throw cam 180 degrees which permits key to be withdrawn in both locked and unlocked positions. 90 degree stop cam allows key to throw cam 90 degrees which permits key to be removed in locked position only. Clip: Also available with clip (Page 15) for 18, 20, and 22 gauge metal. Specify No. C15258. No. 15259 7/8 15259 CAM LOCK with SPUN-ON CAM Disc Tumbler Can be Masterkeyed B1 0 Material: Pressure Cast Cams: See dimension "A" in table. Cams measured from center of cylinder to end of cam. Cam cannot be removed. Other cam options on Page 16. Cam Positions: Regularly furnished with cam mounted in locked position at 12 o clock. Specify on order if different position required. End of cylinder plug milled square. Cams punched with square hole to allow cam to be applied in any one of four positions. Cam Rotation: Furnished with 90 or 180 degree rotation. Specify on order. (Regular rotation 90 degrees counterclockwise from 12 to 9 o clock). Key removable in both locked and unlocked positions. A15259: Same as 15259 except cam is affixed with nut. C15259 or AC15259 available with clip (Page 15) for 18, 20, and 22 gauge metal. 9/16 B1 B 1 7/8 9/16 3/16 13/16 No. 15258 B 1 B1 0 B1 A 15/32 3/4 No.15258* No. 15259* Distance Under Distance Under Cam Cam Head to Cam Head to Cam No. Length B B 1 B 0 B B 1 B 0 C2S 7 8" 15 32" 1 2" C2L 1 1 4" 15 32" 1 2" C3S 7 8" 11 32" 3 8" C3L 1 1 4" 11 32" 3 8" C4S 7 8" 7 32" 1 4" C4L 1 1 4" 7 32" 1 4" C5S 7 8" 19 32" 5 8" C5L 1 1 4" 19 32" 5 8" C6S 7 8" 23 32" 7 8" C6L 1 1 4" 23 32" 7 8" *Specify cam required on order, i.e., 15258 x C2S. A 7/32 No. 15259.640.650 7/8 3/4 Part No/Cyl Length Stock ID No MKYD US26D Qty. (lbs./ oz.) 15258 C15258 15259 A15259 C15259 AC15259.755.765 DIA. MOUNTING CUTOUT 14 CCL SECURITY PRODUCTS 800-733-8588 Fax: 847-537-1881 www.cclsecurity.com

CAM LOCKS Disc Tumbler 15295D CAM LOCK Disc Tumbler Cannot be Masterkeyed. Key removable only in locked position. (180 degree rotation only) Material: Pressure Cast. Regular Key Changes: 200 with key blank No. 5865 JVR (5 Disc).640.650 Part No/Cyl Length Stock ID No. MKYD US2G US26D Qty. (lbs./ oz.) 15295D 15295A Cam 15295D Cam 3/16 7/8 3/4 7/16 1/4.755.765 DIA. Mounting Cutout: "Double D" Standard cutout for Disc Tumbler Cam Locks 5/16 5/8 55/64 11/32 11/32 5/8 1 1 /16 19/32 5/8.035.219.040 REF No. 15295D No. 15295A No. S16597 1/16 33/64 C1091A MINIATURE CAM LOCK PACKAGE Disc Tumbler Cannot be Masterkeyed Material: Zinc die cast cylinders Specifications: Miniature cam lock available with removable style cam only. Engineered for use in metal or fiberglass products Mechanism: 4 Disc tumbler single bitted mechanism Package Includes: 1 1/8 Straight Cam 1 1/8 Offset 11/32 cam Key Pulls / 12:00 and 3:00 position 90 degree rotation only 3 8 3 8 D.472 ±.002 DIA. D.437 +.003 -.000 Recommended Application Hole Size 5 64 No. C-1091-A 5 8 5 64 No. C1091A-KA-US14 No. C1091A-KD-US14 Key No. 105 Key No. 361-370 Distance Distance D D 1 1/8 1 1/8 19 32 DIA. 15 32 3 32 Part No/Cyl Length * Stock ID No. MKYD US14 Qty. (lbs./ oz.) C1091A KA 10911 10.7/0 C1091A KD 10910 10.7/0 *Other keypulls and keying available with minimum quantity orders. Check with Customer Service. Notes: Stock items are not shaded and are available in stock quantity units only. Use Stock ID No. when ordering stock items. Made - To - Order items are shaded. For explanation of finishing symbols, refer to Page 2. 15

CAMS CAM LOCK ACCESSORIES MOUNTING CLIP FOR CAM LOCKS TURNED-DOWN LEG PREVENTS PERMANENT SET Locks available with Clip: 2060C C15751 S2060NC C15258 S2060GF C15259 LOCKING NOTCHES POSITIVE POINTER TURNED-DOWN LEG PREVENTS PERMANENT SET No. 099F268 Made of tempered spring steel. Locks and snaps into place with an assuring click. An exclusive design holds clip securely in place; notches on clip engage notches on cylinder. For 18, 20, and 22 gauge metal. Stock ID Boxed Wt. Part No. No MKYD US2G US4 US14 US26D DICH Stock Qty (lbs./ oz.) 02069S 02290S 108F558 121F428 218F908 230F248 231F558 253F098 253F268 271F138 407F78 096F402 099F26 CAM LOCK ACCESSORIES WASHER: 100 per box. For use under nut on wood application to prevent cylinder from turning.757.762 DIA. 1.690.695.035 No. 253F268 Pronged Washer For use with pin tumbler cam locks..757.762 DIA. 1.632.637.035 No. 230F248 Pronged Washer For use with disc tumbler cam locks. 8 STOP CAMS NUTS 8 No. 108F558 For 90 throw of cam. No. 096F402 PLUG NUT (Disc and Pin Tumbler) 8 No. 121F428 For 180 throw of cam. No. 407F78 CYLINDER NUT (Disc and Pin Tumbler) 3/4-24NC - 2 8 16 CCL SECURITY PRODUCTS 800-733-8588 Fax: 847-537-1881 www.cclsecurity.com

CAMS Bent Straight Offset Hook BENT CAMS No. 15714 No. 15727A HOOK CAMS No. K6L Part No/Cyl Length Stock ID No. MKYD US2G Qty. (lbs./ oz.) C2L C2S C3L C3S C4L C4S C5L C5S C6L C6S K6L 15703N 15714 15727A 15728 15751A 15751E 15751EA 15751EB 15751EC 15751ED OFFSET CAMS No. 15751A No. 15703N No. C3S/C5S No. C3L/C5L No. C4S/C6S No. C4L/C6L No. 15751E STRAIGHT CAMS No. C2S No. C2L No. S14509 No. 15728 No. 15751EA No. 15751EB No. 15751EC No. 15751ED Notes: Stock items are not shaded and are available in stock quantity units only. Use Stock ID No. when ordering stock items. Made - To - Order items are shaded. For explanation of finishing symbols, refer to Page 2. 17

SPECIAL PURPOSE LOCKS Disc Tumbler 2060N & 2060C SPECIAL PURPOSE LOCK Disc Tumbler Can be Masterkeyed, 1000 piece minimum Material: Pressure Cast. Regular Key Changes: 200 with key blank 5865JVR (5 disc) Masterkeyed Key Changes: 180 with key blank 5860KS (5 disc) 2060C: Same as 2060N except mounted by "clip" (Pg.15) instead of "nut" Cylinder: Slabbed on both sides 3/16 5/8 27/32 13/64 THROW 13/16 5/16 3/4 7/8 5/8 No. 2060N 3/16 7/8 7/16 No. S2060NC & S2060GF S2060NC & S2060GF SPECIAL PURPOSE LOCK Disc Tumbler with SPRING-IN Bolt Can be Masterkeyed, 1000 piece minimum. Regularly furnished with both nut and clip. Clip (Page 15) is for mounting on 18, 20, and 22 gauge metal. S2060NC bolt, clip, cylinder, and plug packed unassembled. Bolt inserted after cylinder is installed. S2060GF: Same as S2060NC, but with longer bolt and packed assembled. Bolt easily removed by using picking tool. Material: Pressure Cast Cylinder: Slabbed on both sides Regular Key Changes: 200 with key blank 5865JVR(5 Disc) Masterkeyed Key Changes: 180 with key blank 5860KS (5 Disc) 19/32 3/16 UNLOCKED POSITION LOCKED POSITION 27/32 19/32 3/16 LOCKED POSITION UNLOCKED POSITION 27/32 1 9 /64 51/64 1/2 1 9 /64 31/32 43/64 13/64 13/64 53/64 7/8 O.D. 53/64 7/8 O.D. No. S2060C No. S2060GF Part No/Cyl Length Stock ID No. MKYD US26D Qty. (lbs./ oz.) 2060C 2060N S2060C S2060NC KD 02666 25 3/12 S2060NC CAT30 02663 25 3/12 S2060GF S2060N Masterkey: 1000 piece minimum. 18 CCL SECURITY PRODUCTS 800-733-8588 Fax: 847-537-1881 www.cclsecurity.com

STRIKES MATERIAL: Wrought brass. US4 only. STANDARD PACK: 25 Dimensions shown for reference only. No. 7S 1 15/16 x 17/32 x 3/64 1 9/16 c. to c. screw holes Bolt hole: 9/32 x 29/32 No. 12S 21/8 x 15/32 x 1/16 1 11/16 c. to c. screw holes Bolt hole: 9/32 x 61/64 No. 21S 2 7/16 x 41/64 x 1/16 1 25/36 c. to c. screw holes Bolt hole: 7/32 x 1 1/4 No. 26S 1 3/4 x 7/8 x 1/16 1 25/64 c. to c. screw holes Bolt hole: 19/64 x 3/4 No. 49S 1 1/2 x 21/64 x 3/64 1 7/32 c. to c. screw holes No.52S 2 1/16 x 17/32 x 5/64 1 5/8 c. to c. screw holes No. 69S 2 9/32 x 39/64 x 3/64 1 13/16 c. to c. screw holes Bolt hole: 1/4 x 1 1/8 No.100S 1 3/4 x 1 x 3/64 1 11/32 c. to c. screw holes Bolt hole: 9/32 x 61/64 No. 2540 1 15/16 x 7/16 x 3/16 1 17/32 c. to c. screw holes Stock ID Boxed Wt. Part No. No MKYD US4 Stock Qty (lbs./ oz.) 7S Strike 00082 25 0/4 7S 12S Strike 00083 25 0/4 12S 21S 26S 49S 52S 69S Strike 00102 25 0/8 69S 100S 2540 Strike 00196 25 1/4 2540 Notes: Stock items are not shaded and are available in stock quantity units only. Use Stock ID No. when ordering stock items. Made - To - Order items are shaded. For explanation of finishing symbols, refer to Page 2. 19

RH, Latch Bolt Pictured ENCLOSURE LOCKS Pin Tumbler & Warded 15481 ENCLOSURE LOCK Pin Tumbler Can be Masterkeyed 55481 ENCLOSURE LOCK Cannot be Masterkeyed 3/4.203 DIA. HOLES Keyways Available: CR Material: All Brass 15481RS: Right Hand, Latch Bolt 15481LS: Left Hand, Latch Bolt A15481RS: Right Hand, Dead Bolt A15481LS: Left Hand, Dead Bolt Material: Zinc Die Cast 55481RS: Right Hand, Latch Bolt A55481RS: Right Hand, Dead Bolt Operation: 1 4 turn of key retracts latch bolt. Regularly furnished with Dust Cap to cover keyway. Also available without Dust Cap. Operation & Specifications: Available Right Hand, Keyed Alike #2 in CR Keyway Only 1 1 /4 2 3/4 1/2 1 3 /4 2 1 /4 5/8 11/64 9/16 THROW 7/ 8 A 15/16 No. 238K064505 Regular Key Nickel Silver For Thickness of Material (A) Changes Key Blank No. 7 8" All Different S8690 (5 Pin) Part No/Cyl Length Stock ID No. MKYD US2G US4 Qty. (lbs./ oz.) 15481RS-LS A15481RS-LS 55481RS, KA A55481RS, KA 465F062 R357SGS ENCLOSURE LOCK Ward Construction Cannot be Masterkeyed R557SGS ENCLOSURE LOCK Ward Construction Cannot be Masterkeyed Material: Brass, Cast Zinc Alloy Bolt Police Call Box Lock Furnished Right Hand Only Material: Zinc Die Cast Case & Bolt Furnished Right Hand Only Operation: Self Latching, latch bolt retracted by key Operation: Self Latching, latch bolt retracted by key 2 1 /4 Regular Possible Key Regular Key Changes Changes Key Blank No. 1 1 R4277 35/64 25/ 32 7/32 11/32 2 7 /64 32 7/16 THROW 21/32 Part No/Cyl Length Stock ID No. MKYD US4 Qty. (lbs./ oz.) R357SGS, Packed with 1 short key, R4277 02612 10 4/6 R357SGS, Packed with 1 long key, R4266 R557SGS, Diecast, Packed with 1 short key, R4277 03192 10 4/12 R557SGS, Diecast, Packed with 2 long keys, R4266 05572 R4266 Long Key 3 9/32" 02613 25 1/7 R4266 Long Key R4277 Short Key 2 25/64" 02614 25 1/3 R4277 Short Key 20 CCL SECURITY PRODUCTS 800-733-8588 Fax: 847-537-1881 www.cclsecurity.com

ENCLOSURE LOCKS Disc Tumbler 15767 & 15768 ENCLOSURE LOCKS (PANELBOARD) Disc Tumbler Can be Masterkeyed Material: Pressure Cast Lift Lever & Bolt, Steel Case, Zinc Plated Standard Regularly furnished right hand, left hand available when specified Operation: Self latching. Latch bolt retracted by lifting up on lift lever except when lever is locked down by key. Key is removable in both locked and unlocked positions. 15768: Same as 15767 except without key locking mechanism.193/.197 2 1 1 /16 7/16 Regular Key Masterkeyed Changes Key Blank No. Key Changes Key Blank No. 200 5865JVR (5 Disc) 180 5860KS (5 Disc) 1/4 3/4 5/32 2 5 /16 9/32 THROW PANEL.134 1 3 /8 1 15 /16 3.083 Part No/Cyl Length Stock ID No. MKYD US26D Qty. (lbs./ oz.) 15767 RH KA - CAT45 00224 25 9/5 15767 RH CAT60 00225 25 9/5 15767 15768 Non-locking 00226 25 9/5 15768 5/8 7/8 15867 & 15868 ENCLOSURE LOCKS (PANELBOARD) Disc Tumbler Can be Masterkeyed Material: Pressure Cast Lift Lever, Steel Case, Zinc Plated Standard Reversible for right or left hand door Operation: Self latching. Latch bolt retracted by lifting up on lift lever except when lever is locked down by key. Key is removable in either locked or unlocked position. Easy installation with steel mounting clip 199F83. 15868: Same as 15867 except without key locking mechanism Regular Key Masterkeyed Changes Key Blank No. Key Changes Key Blank No. 200 5865JVR (5 Disc) 180 5860KS (5 Disc) 1 1 41 /64 2 45 /64 13/32 Part No/Cyl Length Stock ID No. MKYD US26D Black Qty. (lbs./ oz.) 15867 KA - CAT60 00227 25 7/12 15867 15868 199F838 1/ 1/2 MOUNTING CLIP NO. 199F838 Notes: Stock items are not shaded and are available in stock quantity units only. Use Stock ID No. when ordering stock items. Made - To - Order items are shaded. For explanation of finishing symbols, refer to Page 2. 21

HANDLES 2506 TEE HANDLE Handle Size: 13 4" Handle Projection: 11 8" Base Diameter: 3 4" Shoulder Diameter: 7 16" Height: 3 32" Spindle Length: 15 16" 1 1 /2 SPINDLE LENGTH 2516 TEE HANDLE Handle Size: 23 4" Handle Projection: 15 8" Base Diameter: 1" Shoulder Diameter: 5 8" Height: 1 8" Spindle Length: 11 4" Tee Handle: Cast bronze Operation: Cam is operated by quarter turn of handle Cam: Steel, zinc plated. No. 2506 regularly furnished. Spindle: Bronze, 5 16" on the diamond Hand: Reversible for right or left hand doors. Assembly plate is regularly furnished blank for spot welding. 3/32 1/8 Proj. 2 1 /8 1 1 /2 Stock Part No/Cyl Length ID No. MKYD US2G US10 US26 Qty. (lbs./ oz.) 2506 Flush metal catch, non-locking 00191 10 2/4 2506 2516 Tee handle, non-locking 00194 10 4/5 2516 2506 Cam 2506B Assembly plate 1 1 /2 3/8.090 5/16 2 1 2 1 /8 No. 2506 Cam Zinc Plated Assembly Plate No. 2506D Blank for spot welding NOTES 22 CCL SECURITY PRODUCTS 800-733-8588 Fax: 847-537-1881 www.cclsecurity.com

HANDLES 2504 FLUSH METAL CATCH Handle: Cast bronze Handle Size: 5 8" Base Diameter: 5 8" Shoulder Diameter: 7 16" Height: 1 16" Operation: Cam is operated by quarter turn of screwdriver or coin in slotted head Cam: Steel, zinc plated. No. 2506 regularly furnished. Spindle: Bronze, 5 16" on the diamond, 9 16" length Hand: Reversible for right or left hand doors Assembly Plate: Wrought steel, 2 1 8" x 5 8" with stop for cam. Regularly furnished blank for spot welding. 1 1 /2 1/2 1/16 3/32 7/16 1/8 5/8 1/16 Stock Part No/Cyl Length ID No. MKYD US2G US10 US26 Qty. (lbs./ oz.) 2504 Flush metal catch, non-locking 00591 10 0/15 2504 2506 Cam 2506B Assembly plate 1 1 /2 3/8.090 5/16 2 1 2 1 /8 No. 2506 Cam Zinc Plated Assembly Plate No. 2506D Blank for spot welding NOTES Notes: Stock items are not shaded and are available in stock quantity units only. Use Stock ID No. when ordering stock items. Made - To - Order items are shaded. For explanation of finishing symbols, refer to Page 2. 23

LEVER HANDLE Disc Tumbler 1000 Series LEVER HANDLE Disc Tumbler Can be Masterkeyed For Metal or Wood Application Material: Pressure Cast Handle, Steel Zinc Plated Spindle Operation: Furnished for one, two, or three point locking, right or left hand doors, with 90 or 180 degrees rotation (90 degrees RH regularly furnished) 90 degree RH handles rotate counter clockwise from 12 to 9 o clock 90 degree LH handles rotate clockwise from 12 to 3 o clock 180 degree handles are reversible for RH or LH doors Key is removable in locked or unlocked position for either 90 or 180 degree handles Cam Positioning: Square spindle allows cams to be mounted at 12, 3, 6, and 9 o clock. Rods and Guides: Not furnished Spindle Length: Regularly furnished 25 32" and 3 1 2" long (measured from back of escutcheon). Also available in 1 4" increments from 1" to 3 1 2" Surface Mounting: In addition to mounting shown, handles are available with attaching holes through face of escutcheon for surface mounting - 1 1 2" c. to c., countersunk for #10-32 screws. When ordering, suffix S to number (1000S). Screws not furnished. Rekeying: Plug removal access hole added to shank of handle allows for removal of plug assembly for rekeying purposes. To remove plug, insert key and rotate 90 degrees. Insert small tool (e.g., paper clip) in access hole and depress retainer while pulling key and plug out of handle. NO.8-32 X 1/4 LG 1 1 /2" CENTER TO CENTER 1/8 MAX DOOR THICKNESS 3/8 2 9 /16 3/16 Part Material Key Key Masterkeyed Key Number Function Handle Spindle Changes Blank No. Key Changes Blank No. Locking Pressure Steel, 200 5865JVR 180 5860KS 1000 Handle Cast zinc 700 8658JVR 700 5861KS Operating satin plated 1000A Handle, chrome non-locking finish 1000B Rigid Handle, US26D non-operating 11/32 25/32 REG 1 11 /16 5 9 /32 5/16 SQ. 1 3 /32 (H1) 1 15 / 32 (H2) 21/ 2 25/32 15/16 H3 HOLDING PLATE 1/2 1 9 /32 4 Spindle Part No/Hand Stock ID No. MKYD Length US2G US26D Qty. lbs./ oz. 1000 - RH CAT 60 Lever 00586 25/32" 10 5/10 1000 - RH KA-CAT45 Lever 02653 3 1/2" 10 5/10 1000 - RH CAT 60 Lever 02368 3 1/2" 10 5/10 1000 - RH or LH 2.23 X 1000A - RH Lever Non-locking 00587 25/32" 10 5/10 1000A - RH Lever Non-locking 02369 3 1/2" 10 5/10 1000A Non-locking X 1000AS Surface non-locking X 1000B Non-locking rigid 1000S 2.23 X H1-US2G 00074 H1 H2-US2G 00075 H2 H3-US2G 00076 H3 S14441 S14452 S14271 X = Spindle for metal applications standard length is 25/32". Other lengths available 1" up to 3 1/2", at additional cost. CAMS FOR USE ON BOTH THE 1000 AND 1001 (Cams continued on Page 24. NOTE: All cams on Page 16 may be used with 1000.) 3/32 3/16.154.156 DIA. 1 7 /8 1 7 /16.314.317 SQ. 1 3 /32 R. 3/32R (H1) 1 15 /32 (H2) 2 1 /2 3/8R 1/2 35/64R 1/32R 1 7 /8.314.317 SQ. 11/16 3/16 1 7 /8 1 7 /16 1 3 /32.314.317 SQ. Cam No. H1 and No. H2 SPECIFY CAM REQUIRED Packed 10 per Box 3/64 45 3/4 1/32R Holding Plate No. H3 Packed 10 per Box Cam No. S14271 24 CCL SECURITY PRODUCTS 800-733-8588 Fax: 847-537-1881 www.cclsecurity.com

TEE HANDLES Disc Tumbler NO.8-32 X 1/4 LG 1 1 /2" CENTER TO CENTER 1/8 MAX DOOR THICKNESS 3/8 1001 Series TEE HANDLE Disc Tumbler Can be Masterkeyed For Metal or Wood Application Material: Pressure Cast Handle, Steel Zinc Plated Spindle Operation: Furnished for one, two, or three point locking, right or left hand doors, with 90 or 180 degrees rotation (90 degrees RH regularly furnished) 90 degree RH handles rotate counter clockwise from 12 to 9 o clock 2 9 /16 3/16 90 degree LH handles rotate clockwise from 12 to 3 o clock 180 degree handles are reversible for RH or LH doors Key is removable in locked or unlocked position for either 90 or 180 degree handles Cam Positioning: Square spindle allows cams to be mounted at 12, 3, 6, and 9 o clock Rods and Guides: Not furnished Spindle Length: Regularly furnished 25 32" and 3 1 2" long (measured from back of escutcheon). Also available in 1 4" increments from 1" to 3 1 2". Surface Mounting: In addition to mounting shown, handles are available with attaching holes through face of escutcheon for surface mounting -11 2" c. to c., countersunk for #10-32 screws. When ordering, suffix S to number (1001S). Screws not furnished. Rekeying: Plug removal access hole added to shank of handle allows for removal of plug assembly for rekeying purposes. To remove plug, insert key and rotate 90 degrees. Insert a small tool (e.g., paper clip) in access hole and depress retainer while pulling key and plug out of handle. Part Material Key Key Masterkeyed Key Number Function Handle Spindle Changes Blank No. Key Changes Blank No. Locking Pressure Steel, 200 5865JVR 180 5860KS 1001 Handle Cast Zinc 700 8658JVR 700 5861KS Operating Satin Plated 1001A Handle, Chrome non-locking Finish 1001B Rigid Handle, US26D non-operating 11/32 25/32 REG 1 19 /32 3 5 /32 5/16 SQ. 1 3 /32 15/16 (H1) 1 15/32 (H2)2 1/2 1/2 H3 HOLDING PLATE Spindle Part No/Hand Stock ID No. MKYD Length US26D US2G Qty. (lbs./ oz.) 1001 - RH KA-CAT45 Tee 02650 25/32" 10 5/10 1001 - RH CAT 60 Tee 00588 25/32" 10 5/10 1001 - RH KA-CAT45 Tee 02655 3 1/2" 10 5/10 1001 - RH CAT 60 Tee 02370 3 1/2" 10 5/10 1001 - RH or LH 2.23 X 1001A - RH Tee Non-locking 00589 25/32" 10 5/10 1001A - RH Tee Non-locking 02367 3 1/2" 10 5/10 1001A Non-locking - X 1001AS Surface non-locking X 1001B Non-locking rigid* 1001S 2.23 X H1-US2G 00074 H1 H2-US2G 00075 H2 H3-US2G 00076 H3 S14441 S14452 * Minimum order 500 pieces X = Spindle for metal applications standard length is 25/32". Other lengths available 1" up to 3 1/2", at additional cost. CAMS FOR USE ON BOTH THE 1000 AND 1001 ( NOTE: All cams on Page 16 may be used with 1000.).314.315 SQ. 3/8 7/16.314.317 SQ. 3/8 7/16 7/32 DIA. (2 holes) 11/16 11/16 13/16 DIA. 1 5 /8 1 5 /8 1 1 /2 Mounting Hole Locations for 1000/1001 5/8 5/8 3/4 Cam No. S14441 Wrought Steel Zinc Plated Cam No. S14452 Wrought Steel Zinc Plated For use with 1000 & 1001 handle ONLY. For use with locking devices or handles having 0.314/0.317 spindle on the square. 25

3 POINT TEE HANDLES/ PULL HANDLES Disc Tumbler RH Pictured 15766 3 POINT TEE HANDLES Disc Tumbler Can be Masterkeyed Regularly furnished right hand. Left hand available when specified on order. Material: Pressure Cast, Steel Zinc Plated Cam (RH No. 262F79 or LH No. 262F80) Operation: Top and bottom bolts and cam are operated by quarter turn of handle, except when handle is locked by key. Key removable in either locked or unlocked position. Metal Thickness: 1 8" Maximum Regular Key Changes: 200 with key blank 5865JVR (5 disc) Masterkeyed Key Changes: 180 with key blank 5860KS (5 disc) Rods and Guides: Not furnished Hand: Regularly furnished right hand Rekeying: Plug removal access hole added to shank of handle to allow for removal of plug assembly for rekeying purposes. To remove plug, insert key and rotate 90 degrees. Insert small tool (e.g., paper clip) in access hole and depress retainer while pulling key and plug out of handle. 5/8 11/ 32 2 3 /4 1 3 /8 1 5 /8 1 3 /4 1 3 /4 13/64 55/64 Part No/Cyl Length Stock ID No. MKYD US26D Qty. (lbs./ oz.) 15766 RH Tee KA - CAT45 00592 10 5/0 15766 RH Tee KA - CAT60 00593 10 5/0 15766 262F79 (RH) 262F80 (LH) 1 3 /4.314 9/16.317 SQ. 27/32 1 /4 3 POINT CAM RH 262F79 3284 PULL HANDLE Overall Size: 11 2" x 53 4" Base Width: 7 8" Projection: 11 4" Clearance: 7 8" Material: Steel, No Finish For Welding or Stainless Steel 1 1 /2 7/8 5 3 /4 7/8 1 1 /4 Part No/Cyl Length Stock ID No. MKYD US2G PSS Qty. (lbs./ oz.) 3284* 02005 100 13/3 3284* 3284* *Only sold in quantities of 100 S14810 PULL HANDLE Overall Size: 11 2" x 53 4" Base Width: 7 8" Projection: 11 4" Clearance: 7 8" Material: Steel or Stainless Steel 5 1 1 /2 7/8 13/64 7/8 1 1 /4 Part No/Cyl Length Stock ID No. MKYD US2G PSS Qty. (lbs./ oz.) S14810* S14810* * Only sold in quantities of 100 5 3 /4 1 26 CCL SECURITY PRODUCTS 800-733-8588 Fax: 847-537-1881 www.cclsecurity.com

CATCHES With Concealed Compression Springs 834, 834S, 834U DRAW PULL CATCHES Material: : Spring cover and cradle are of stainless steel, other parts are carbon steel Designed for compressing gaskets. Made for heavy duty service. Withstands 600 lb. pull test. Top piece designed (for catch protection) to withstand 400-500 lb. pull. Proper positioning of catch and strike automatically adjusts springs to proper holding tension. Overall Size: 2 3 4" x 1 1 8" x 3 8" Strike No: S 834 Less Strike: Specify on order using prefix "LS" (e.g., LS834). S16127 available by special order. 834S.062.31.312.63.144 DIA. 4 places Number Description Desired Tension A B 834 Lever Curves In 30 lbs. 1.813 2.79 834U Lever Curves Out 70 lbs. 1.938 2.91.62.45.062.40 B.563 1.13 A.85 Part No/Cyl Length Stock ID No. MKYD US2G PSS Qty. (lbs./ oz.) 834* 03059 25 2/3 834* 834S* S16127 S-S16127 No. 834 compressions spring draw pull catch meets U.S. Signal Corps specification, Drawing number SC-B-83314 834 * Special minimum order quantities. Contact Customer Service. NOTES Notes: Stock items are not shaded and are available in stock quantity units only. Use Stock ID No. when ordering stock items. Made - To - Order items are shaded. For explanation of finishing symbols, refer to Page 2. 27

CATCHES With Compression Springs 824 DRAW PULL CATCHES Normal attaching hole spacing tension, 50 lbs. ± 10% - 1 8" deflection Material: Steel with Stainless Steel Strike No: S794 for 824, S794W for 824W Less Strike: Specify on order using prefix "LS" (e.g., LS824)..06.56.45.87.53.16 DIA. 2 places Part No/Cyl Length Stock ID No. MKYD US2G Qty. (lbs./ oz.) 824 00135 25 2/0 S794 S794W 2.41 2.41 1.59.437.08 1.37.14 DIA. 2 places 804 DRAW PULL CATCH Normal attaching hole spacing catch tension, 100 lbs. ± 10% - 1 8" deflection Material: 804 Steel with Stainless Steel; R801 Steel Strike No.: S641 Less Strike: Specify on order using prefix "LS" (e.g., LS804). Optional Strike No. S644 (Page 28). 1.00.56.218 DIA. 2 places.08 1.06.50 Part No/Cyl Length Stock ID No. MKYD US2G Qty. (lbs./ oz.) 804 00134 25 4/0 S644 S641 R801 * * Minimum order required. Check with Customer Service. 1.81.56.56 3.51 No. R801 Loop retainer Spring Furnished only when ordered, i.e., 804 x R801 16.218 DIA. 3 places 1.83.109.58 2 5 /32 7/32 DIA. 3 HOLES 9/16 13/ 16 3/8 9/16 13/64 13/ 32 1.045 1.070 Shown Applied 28 CCL SECURITY PRODUCTS 800-733-8588 Fax: 847-537-1881 www.cclsecurity.com

DRAW PULL CATCHES 641, 642, 643, 643W DRAW PULL CATCH Less Strike: Specify on order using prefix "LS" (e.g., LS641). No. 641 Number Material Strike No.* 641 Steel S641 642 Steel S641 643 Steel S641 643W Steel. Without S641W holes for welding.50.083.109 1.09.56 3.53 1.00.562.218 Dia. 2 Places 1.875.562.562 Part No/Cyl Length Stock ID No. MKYD US2G Qty. (lbs./ oz.) 641 00121 25 4/7 642 00122 25 5/3 643 00123 25 5/0 S641 S644.218 Dia. 3 Places 1.30.083 1.09.109.50.522 3.53.218 Dia. 2 Places.336.218 Dia. 1.30.81 2 Places No. 642 No. 643/643W 1.00.562 1.875 1.125.50.083 1.09.109.91.375 Dia. 3.84.218 Dia. 2 Places 1.00.562 1.30.218 Dia. 2 Places 1.875 1.531 No. S644 with attaching holes for Catches 641, 642, 643, 804 3/4 41/64 1 23 /32 3/4 5/64 13/64 DIA. 2 HOLES 13/ 16 Notes: Stock items are not shaded and are available in stock quantity units only. Use Stock ID No. when ordering stock items. Made - To - Order items are shaded. For explanation of finishing symbols, refer to Page 2. 29

DRAW PULL CATCHES 794 DRAW PULL CATCH Material: Steel, no finish Strike No.: S794 Less Strike: Specify on order using prefix "LS" (e.g., LS794)..062.56.31 Part No/Cyl Length Stock ID No. MKYD US3 US2G Qty. (lbs./ oz.) 794 00130 25 2/3 794 S794.87.531.130 Dia. 2 Places.080.50 1.269.437 1.06.144 Dia. 2 Places 797, 0797, 797W DRAW PULL CATCH Less Strike: Specify on order using prefix "LS" (e.g., LS797). Number Material Strike No.* 797 Steel S794 0797 Brass, dipped S0794 and lacquered Steel without 797W holes for welding S794W.31.062.56.080.50.87.531.130 Dia. 2 Places Part No/Cyl Length Stock ID No. MKYD US3 US2G Qty. (lbs./ oz.) 797 00131 25 1/7 0797 * Minimum order 500 pieces 2.29 1.469.437.92.144 Dia. 2 Places 30 CCL SECURITY PRODUCTS 800-733-8588 Fax: 847-537-1881 www.cclsecurity.com

DRAW PULL CATCHES 798 DRAW PULL CATCH Material: Steel Designed to withstand 100 lb. pull Part No/Cyl Length Stock ID No. MKYD US2G Qty. (lbs./ oz.) 798 00132 25 1/7.35 2.66.083.50 1.59.437.156 Dia. 2 Places.89 250, 250W DRAW PULL CATCH Less Strike: Specify on order using prefix "LS" (e.g., LS250). Number Material Strike No.* 250 Steel S250 Steel, no finish 250W Without holes S250W for welding.50.072.438.375 Part No/Cyl Length Stock ID No. MKYD US2G Qty. (lbs./ oz.) 250 00107 25 2/3 S250.093.31 Dia. 1.625 1.188.144 Dia. 4 Places 2.44 1.094 1.00.92 Notes: Stock items are not shaded and are available in stock quantity units only. Use Stock ID No. when ordering stock items. Made - To - Order items are shaded. For explanation of finishing symbols, refer to Page 2. 31

MULTI-PURPOSE SUIT CASE CATCHES 1771 SUIT CASE CATCH Material: Steel Part No/Cyl Length Stock ID No. MKYD US3 US14 Qty. (lbs./ oz.) 1771 US3 00147 25 1/7 1771 US14 00148 25 1/7 1 7 /16 3/8 3/32 5/32 Dia. 1 1/2 1/2 31/32 3/8 3/4 2 3 /4 1 11 /16 2 9 /32 MOUNTING DIMENSIONS 1778 SUIT CASE CATCH Material: Steel Part No/Cyl Length Stock ID No. MKYD US3 US14 Qty. (lbs./ oz.) 1778 US3 00149 25 2/8 1778 US14 00150 25 2/8 1 3 /4 7/16 3/32 3/8 1 1 /4 5/8 5/8 1 3 /32 15/16 3 9 /32 2 13 /16 2 3 /32 MOUNTING DIMENSIONS SESAMEE Display PCW - 400 SESAMEE CUT-AWAY DISPLAY 4 1 4" x 6 5 8" Easel Stand for counter top. Internal parts of SESAMEE cut-away are fully operational. Part No/Cyl Length Stock ID No. MKYD Qty. (lbs./ oz.) PCW-400 03209 1 1/0 32 CCL SECURITY PRODUCTS 800-733-8588 Fax: 847-537-1881 www.cclsecurity.com

SESAMEE Padlocks No.K436 No.K500 3/4 No. AB410 K436, K437, K440, K500 SERIES CCL - Sesamee, "the padlock without a key", means strength and simplicity in locking security. Choose from 10,000 possible combinations which can be easily changed and set. Heel and toe locking. All brass internal locking mechanism. Automatic "0000" stop. Full instructions furnished. Chain: Can be furnished with 9-inch chain. Steel shackle with 2217N chain assembly. Brass shackle with 02217N chain assembly. Specify on order using suffix "C" (e.g., 436C). AB410 Ruggedly built padlock with case hardened steel shackle, chrome plated to resist corrosion. Choose from 1,000 possible combinations. Full instructions furnished. SESAMEE Display PCW - 400 SESAMEE CUT-AWAY DISPLAY 4 1 4" x 6 5 8" Easel Stand for counter top. Internal parts of SESAMEE cutaway are fully operational. Part No/Cyl Length Stock ID No. MKYD Qty. (lbs./ oz.) PCW-400 03209 1 1/0 No. K636 SUPER SESAMEE TM Padlocks K636, K637, K646 CCL - Super Sesamee TM, the industrial strength 4-Dial combination padlock, encased in a hardened steel full metal jacket, with a black, weather resistant electrocoating. Set your own combination from 10,000 available combinations. Heel and toe locking, all brass internal mechanism. Full combination resetting instructions furnished along with Change Pin. Combination cannot be changed unless the lock is in the open position. No. K637 No. K646 Shackle Number Material Shackle Material Clearance Qty. (lbs./oz.) AB410 Heavy pressure cast, Hardened steel, Chrome plated 9/16" 5 1/11 Black Epoxy finish K436 Brass Body Hardened steel, Chrome plated 1" 5 3/4 K0436 Brass Body Marine Type Brass 1" 5 3/4 K437 Brass Body Hardened steel, Chrome plated 2 1/4" 5 3/4 K0437 Brass Body Marine Type Brass 2 1/4" 5 3/8 KCR0436 Brass Body, Polished Marine Type Brass 1" 5 3/8 Chrome Finish Chrome plated K440 Brass Body Hardened steel, Chrome plated 4" 5 3/12 K5003 4 Heavy pressure cast, Hardened steel, Chrome plated 1" 5 3/1 Black Epoxy finish K500 2 1/4 Heavy pressure cast, Hardened steel, Chrome plated 2 1/4" 5 3/4 Black Epoxy finish K636 Black Hardened Steel Jacket Chrome Plated Molybdenum 1" 5 7/0 K637 Black Hardened Steel Jacket Chrome Plated Molybdenum 2" 5 7/8 K646 Black Hardened Steel Jacket Chrome Plated Molybdenum 1" 5 8/0 CCL SECURITY PRODUCTS 800-733-8588 Fax: 847-537-1881 www.cclsecurity.com 33

SEARCHALERT TSA Accepted by PRESTOLOCK SearchAlert Collection: K6430, K7400, K7450, K7470, K8470 No.K7470 27/32 33/64 1/8 1 1/8 23/64 1 39/64 Combination: 3 and 4 dials, 1,000/10,000 possible combinations Colors: * The new SearchAlert re-settable combination padlock by Prestolock offers two unique innovations in luggage security: 1. SearchAlert may be opened with a secured access device controlled by Transportation Security Administration (TSA) agents. No SearchAlert lock should be cut off by TSA agents. 2. SearchAlert features a Security Window which changes color from Green to Red when any secured access device is used. The Security Window shows Red under the following conditions: Luggage checked at an Airport is sent through an electronic screening. If a TSA agent determines the luggage needs to be hand searched, the SerachAlert lock will be opened by the agent. When the TSA secured access device is used, the Security Window changes color from Green to Red. The Security Window also changes color from Green to Red if a counterfeit secured access device is used to open the SearchAlert lock. If a TSA agent hand searches a piece of luggage, the agent will leave a TSA Notification of Baggage Inspection in the bag. If the SearchAlert lock Security Window shows red, and no official Notification of Baggage Inspection is found, the traveler should take the luggage to the airlines luggage claim office to determine if anything is missing, or if anything has been added to the luggage. 1/8 23/64 1/8 23/64 1/4 15/32 27/32 27/32 23/32 1 7/8 1 39/64 1 39/64 No.K8470 33/64 1 1/8 No.K7400 33/64 1 1/8 No.K6430 33/64 1 1/8 No.K7450 Bright Nickel Brass Plated Black Cobalt Blue Lime Green Color Options Shelf Master Boxed Wt. Part No/Cyl Length Stock ID No. Pack Pack (lbs./oz.) Pewter Construction Orange Hot Pink Sunshine Yellow White Camouflage Purple Grape Fire Engine Red 6430 Carded** K6430* 6 1/0 6430 Bulk** B6430* - 100 17/0 7400 Carded K7400* 6 0/15 7400 Bulk** B7400* - 100 16/0 7400 2-Pack K7400X2* 12 4/0 7450 Carded K7450* 6 1/0 7450 Bulk** B7450* - 100 16/0 7470 Carded K7470* 6 1/0 7470 Bulk** B7470* - 100 16/0 8470 Carded K8470* 6 1/1 8470 Bulk** B8470* - 100 18/0 ** Bulk items sold only in quantities of 100 unless specified. *NOTES: For carded items, use "K" prefix (e.g., K3470) For bulk items, use "B" prefix (e.g., B3470). For plated finishes, specify one suffix from below (e.g., K3470BN): Bright Nickel BN Brass Plated BP For colors, specify one suffix from below (e.g., K3470PSB): Black PSB Construction Orange PFO Sunshine Yellow PFY Cobalt Blue PBL Hot Pink PFP Camouflage PCF White PW Lime Green PFG Purple Grape PPU Pewter PTR Fire Engine Red PRD Not all plated finishes available with all locks. Check with Customer Service for information on custom colors. 34 CCL SECURITY PRODUCTS 800-733-8588 Fax: 847-537-1881 www.cclsecurity.com

PRESTOLOCK Combination Padlocks Each lock is made of zinc die-cast housings with steel shackles for strength and durability--we back it up with a lifetime guarantee. Set your own combination on a wide variety of styles, colors, finishes, and sizes. 2402 DELUXE COMBINATION PADLOCK Combination: 2 dials, 100 possible combinations Colors: Black 47/64 1 1 /8 31/64 5/16 55/64 1/8 Shelf Master Boxed Wt. Part No/Cyl Length Stock ID No. Nickel Black Packaging Pack (lbs./oz.) 2402 Carded K2402* 6 0/9 2402 Bulk** B2402* - 100 8/2 ** Bulk items sold only in quantities of 100 unless specified. 2400 DELUXE COMBINATION PADLOCK Combination: 3 dials, 1,000 possible combinations 27/32 1 27 /64 5/16 1/8 Shelf Master Boxed Wt. Part No/Cyl Length Stock ID No. Gold Chrome Pack Pack (lbs./oz.) 2400 Carded K2400* 6 36 0/11 2400 Bulk** B2400* - 100 9/10 ** Bulk items sold only in quantities of 100 unless specified. 31/64 55/64 *NOTES: For carded items, use "K" prefix (e.g., K3470). For bulk items, use "B" prefix (e.g., B3470). For plated finishes, specify one suffix from below (e.g., K3470BN): Bright Nickel BN Polished Gold PG Antique Brass ABR Brass Plated BP Polished Chrome PC Black Chrome ABC For colors, specify one suffix from below (e.g., K3470PSB): Midnight Black PSB Neon Orange PFO Flame Red PRD Royal Blue PBL Hot Pink PFP Snow White PW Lime Green PFG Passion Purple PPU Bright Yellow PFY Pewter PTR Not all plated finishes available with all locks. Check with Customer Service for information on custom colors. NOTES 35

PRESTOLOCK Combination Padlocks 3470 TRADITIONAL COMBINATION PADLOCK Combination: 3 dials, 1,000 possible combinations Colors: Black, 27/32 1 27 /64 31/64 PRESTOLOCK 5/16 55/64 1/8 Shelf Master Boxed Wt. Part No/Cyl Length Stock ID No. Nickel Black Pack Pack (lbs./oz.) 3470 Carded K3470* 6 36 0/11 3470 Bulk** B3470* - 100 9/6 3470 2-Pack *** K3470X2* 6 1/4 ** Bulk items sold only in quantities of 100 unless specified. *** Comes in All Finishes 4400 TRADITIONAL COMBINATION PADLOCK Combination: 4 dials, 10,000 possible combinations Shelf Master Boxed Wt. Part No/Cyl Length Stock ID No. Nickel Pack Pack (lbs/oz.) 4400 Carded K4400* 6 0/14 4400 Bulk** B4400* - 100 12/6 4400 2-Pack K4400X2 6 36 1/9 ** Bulk items sold only in quantities of 100 unless specified. 2405 3-DIAL CLIP LOCK Combination: 3 dials, 1,000 possible combinations Colors: Black, Shelf Master Boxed Wt. Part No/Cyl Length Stock ID No. Black Pack Pack (lbs./oz.) 2405 Carded K2405* 6 36 0/10 2405 Bulk** B2405* - 100 8/6 2405 2-Pack K2405X2* 6 36 1/2 ** Bulk items sold only in quantities of 100 unless specified. *NOTES: For carded items, use "K" prefix (e.g., K3470). For bulk items, use "B" prefix (e.g., B3470). For plated finishes, specify one suffix from below (e.g., K3470BN): Bright Nickel BN Polished Gold PG Antique Brass ABR Brass Plated BP Polished Chrome PC Black Chrome ABC 36 CCL SECURITY PRODUCTS 800-733-8588 Fax: 847-537-1881 www.cclsecurity.com

PRESTOLOCK Combination Padlocks 2430 DELUXE COMBINATION PADLOCK Combination: 3 dials, 1,000 possible combinations 15/16 1 25 /64 35/64 1/4 Shelf Master Boxed Wt. Part No/Cyl Length Stock ID No. Orange Pack Pack (lbs./oz.) 2430 Bulk** B2430* - 100 15/10 ** Bulk items sold only in quantities of 100 unless specified. 31/64 1 7 /32 2470 STANDARD COMBINATION PADLOCK Combination: 3 dials, 1,000 possible combinations Colors: Black, other colors 1,000 piece minimum 15/16 1 25 /64 35/64 1/ 4 Shelf Master Boxed Wt. Part No/Cyl Length Stock ID No. Nickel Black Pack Pack (lbs./oz.) 2470 Carded K2470* 6 36 1/1 2470 Bulk** B2470* - 100 15/11 ** Bulk items sold only in quantities of 100 unless specified. 31/64 1 7 /32 2439 TRAVELOCK For securing doors, windows, drawers, and cabinets. Includes 2470 nickel plated padlock, hook, slotted plate, and storage pouch. Appox. Shelf Master Boxed Wt. Part No/Cyl Length Stock ID No. Chrome Nickel Pack Pack (lbs./oz.) 2439 2439 6 36 2/2 *NOTES: For carded items, use "K" prefix (e.g., K3470). For bulk items, use "B" prefix (e.g., B3470). For plated finishes, specify one suffix from below (e.g., K3470BN): For colors, specify one suffix from below (e.g., K3470PSB): Midnight Black PSB Neon Orange PFO Flame Red PRD Royal Blue PBL Hot Pink PFP Snow White PW Lime Green PFG Passion Purple PPU Bright Yellow PFY Pewter PTR Not all plated finishes available with all locks. Check with Customer Service for information on custom colors. 37

PRESTOLOCK Combination Padlocks 1/2 7/16 1/8 2340, 2350 KEYED MINI LUGGAGE LOCK Pin Tumbler, two keys per lock Side entry, keyed alike, key retaining Material: Solid brass housing with steel shackle 2350 same except two per card 2341, 2351 KEYED MINI LUGGAGE LOCK Pin Tumbler, two keys per lock 3-pin, keyed alike, key retaining Material: Steel housing with steel shackle. 2351 same except two per card 25/32 PRESTO 57/64 13/32 Aprox. Shelf Master Boxed Wt. Part No/Cyl Length Stock ID No. Brass Black Pack Pack (lbs./oz.) 2340 Carded K2340* 6 36 0/10 2340 Bulk** B2340* - 100 8/0 2341 Carded K2341* 6 36 0/10 2341 Bulk** B2341* - 100 8/0 2350 Carded 2-Pack K2350 6 36 1/1 2351 Carded 2-Pack K2351 6 36 0/13 ** Bulk items sold only in quantities of 100 unless specified. 2620 HEAVY DUTY COMBINATION PADLOCK Material: Die cast housing with case hardened steel shackle Combination: 4 dials, 10,000 possible combinations Toe and Heel locking Appox. Shelf Master Boxed Wt. Part No/Cyl Length Stock ID No. Nickel Pack Pack (lbs./oz.) 2620 Carded K2620* 6 36 3/4 2620 Bulk B2620* - 25 12/8 1 1 7 /64 5/16 2 7 /64 2 5 /64 25/32 *NOTES: For carded items, use "K" prefix (e.g., K3470). For bulk items, use "B" prefix (e.g., B3470). For plated finishes, specify one suffix from below (e.g., K3470BN): Bright Nickel BN Polished Chrome PC Antique Brass ABR Brass Plated BP Black Chrome ABC For colors, specify one suffix from below (e.g., K3470PSB): Midnight Black PSB Not all plated finishes available with all locks. Check with Customer Service for information on custom colors. 38 CCL SECURITY PRODUCTS 800-733-8588 Fax: 847-537-1881 www.cclsecurity.com

PRESTOLOCK Combination Padlocks 2621 HEAVY DUTY COMBINATION PADLOCK Material: Die cast housing with case hardened steel shackle Combination: 4 dials, 10,000 possible combinations Toe and Heel locking Shelf Master Boxed Wt. Part No/Cyl Length Stock ID No. Nickel Pack Pack (lbs./oz.) 2621 Carded K2621* 6 36 3/12 2621 Bulk B2621* - 25 14/2 2 19 /32 1 7 /64 5/16 2 7 /64 2 5 /64 25/32 COMBINATION LOCKS for Cabinet Doors D900 and D901 COMBINATION LOCKS for Cabinet Doors Available for Wood or Metal Applications. They easily retrofit existing locks of similar design and feature re-settable combinations with easy to use instructions. Available in US26D or US4. D900 x US26D D901 x US26D D901 x US4 Full templates for new installations! Mechanical, no batteries needed. Latex Free for Hospital, Medical Center and Nursing Care facilities. Boxed Wt. Part No/Cyl Length Stock ID No. Description Qty. (lbs./ oz.) D900 x US26D 90000 Combination Lock Push Button US26D, Sheet Metal Door.075-.105 ea. D901 x US26D 90100 Combination Lock Push Button US26D, Wood Door 5/8"-7/8" ea. D901 x US4 90101 Combination Lock Push Button US4, Wood Door 5/8"-7/8" ea. *NOTES: For carded items, use "K" prefix (e.g., K2620). For bulk items, use "B" prefix (e.g., B2620). For finishes, specify one suffix from below (e.g., K3470BN): Bright Nickel Polished Chrome BN PC 39

PRESTOLOCK Countertop Displays TSAD Display Options There are three options for TSAD Displays: Build Your Own Display, TSAD-2, TSAD-3. All Include*: 1 Each SearchAlert Counter Card 1 Each SearchAlert Spin Rack Header 1 Each Prestolock Promise Sheet 1 Each SR08019 8-Hook Spin Rack 1 Each SearchAlert Poster An attractive and convenient way to display your PRESTOLOCKS. To obtain, contact Customer Service. 1. Build Your Own TSAD Display Order 48 pieces of SearchAlert, Prestolock or Prestoseal and receive Core Items Free of Charge. *Core Items in Display Options 2. TSAD-2 Display 18 Each: K7400PSB Black 12 Each: K7400PTR Pewter 12 Each: K7400BN Bright Nickel 6 Each: K7400PW White 3. TSAD-3 Display 18 Each: K7400PSB Black 6 Each: K7400PTR Pewter 6 Each: K7400BN Bright Nickel 6 Each: K7400PW White 6 Each: K61900 Deluxe Prestoseal Black 6 Each: K61902 Mimi Prestoseal Yellow 40 CCL SECURITY PRODUCTS 800-733-8588 Fax: 847-537-1881 www.cclsecurity.com

HUSKI TM PADLOCKS Disc Tumbler Rekeyable 66 Series HUSKI PADLOCKS Material: Solid pressure cast, textured military green matte finish. Hardened steel, chrome plated shackle. Key Blank No.: 5865-JVR (5 Disc), 8658-JVR (6 Disc) Disc Tumblers: 6 regular Regular Key Changes: 200 (5 Disc), 700 (6 Disc) Masterkeyed Key Changes: 180 (5 Disc), 700 (6 Disc) Masterkeying: Available when specified on order Chain: Available with 2217N steel chain assembly, 9" chain. Specify on order using suffix "C" (e.g., 66C). 1/4 3/4 A 1 13 /32 3/4 1 1 /2 Shackle Part No/Cyl Length Stock ID No. MKYD Clearance Qty. (lbs./ oz.) 66 KD 03060 3/4" 10 4/0 K66 KD, Carded 00088 3/4" 8 4/0 66 KA - CAT15 00091 3/4" 10 4/0 66 CAT30 00092 3/4" 10 4/0 66 AUE1 00090 3/4" 10 4/0 66 AUE50 00093 3/4" 10 4/0 66 MKY M8003 (KD) 00103 3/4" 10 4/0 66 3/4" 66H 1 1/4" 66HB 1 1/4" 66K 5" 66P 2 3/4" 66 Series Only 66H available with breakable shackle for emergency entry. Specify on order using suffix "B" (e.g., 66HB) 66R, 66KR HUSKI PADLOCKS 66R: 2 3 4" shackle with tag and clevis 66KR: 5" shackle with tag and clevis Clevis: Nylon holder and brass tag Shackle Part No/Cyl Length Stock ID No. MKYD Clearance Qty. (lbs./ oz.) 66R KD 00096 2 3/4" 10 4/5 66R KA - AUE1 00097 2 3/4" 10 4/5 66R MKY M8003 (KD) 00098 2 3/4" 10 4/5 66R 2 3/4" 66KR KD 00099 5" 10 4/3 66KR KA - AUE1 00100 5" 10 4/3 66KR MKY M8003 (KD) 00101 5" 10 4/3 66KR 5" 1/4 3/4 2 3 /4 1 13 /32 3/4 1 1 /2 41

PADLOCKS & CHAINS Pin Tumbler 95 PADLOCK Heel and toe deadlocking security Material: Solid pressure cast case with silver gray finish. Hardened steel, chrome plated shackle. Regular Key Changes: All different Masterkeying: Available when specified on order 2 Keys Blank No.: 8687C-CR Keyways Available: CR Number of Pin Tumblers: 6 Chain: Available with 2217N steel chain assembly, 9" chain. Specify on order using suffix "C" (e.g., 95C). 9/32 7/8 3/4 Shackle Zinc Brass Silver Part No./Cyl Length Stock ID No MKYD Clearance Plated Dipped Gray 95 3/4" 18.66 2217N N/A 02217N N/A 1 19 /32 15/16 1 3 /4 43/64 178, 178A PADLOCKS Material: Solid brass case, with wheel finish Masterkeying: Available when specified on order 2 Keys Blank No.: 8618C Number of Pin Tumblers: 5 Regular Key Changes: All different Special Stamping: Available with case stamped to customer requirements when specified on order. 15/32 Shackle Shackle Part No/Cyl Length Stock ID No. MKYD Clearance Material 178 5/8" Brass 178A 5/8" Hardened Steel 3/16 5/8 1 5 /32 9/16 1 1 /8 42 CCL SECURITY PRODUCTS 800-733-8588 Fax: 847-537-1881 www.cclsecurity.com

PADLOCKS Pin Tumbler 904 SERIES PADLOCKS Keyways Available: CR, R1, R4, VR Number of Pin Tumblers: 5 or 6 Regular Key Changes: All different Masterkeying: Available when specified on order Chain: Available with 9" chain. Steel shackle with 2217N chain assembly. Brass shackle with 02217N chain assembly. Specify on order using suffix "C" (e.g., 904C). Special Stamping: Available with case stamped to customer requirements when specified on order. Unassembled padlocks available. 5/16 41/64 A 1 13 /32 5/8 1 1 /2 Key Appox. Material Shackle Blank Part No/Cyl Length Stock ID No. MKYD Case Shackle Clearance No. Qty. (lbs./ oz.) 904 US4 KD 02111 Solid brass, Hardened 3/4" 8618C 10 4/8 wheel finish steel, chrome plated 904 US4 KA - BAZ163 00138 Solid brass, Hardened 3/4" 8618C 10 4/8 wheel finish steel, chrome plated 904 Solid brass, Hardened 3/4" 8618C wheel finish steel, chrome plated 0904 Solid brass, Solid brass 3/4" 8618C wheel finish 904S Solid brass, Hardenede 1 1/4" 8618C wheel finish steel, chrome plated 0904S Solid brass, Solid brass 1 1/4" 8618C wheel finish 904H Solid brass, Hardened 2 1/2" 8618C wheel finish steel, chrome plated 9-inch Chain Assemblies for CCL Padlocks Weight per For Shackle pack of 10 Number Used with Padlock Series Material Diameter (lbs./oz.) 2217N 904, 436, 437, 500, 95, 66 Steel, zinc plated 0.312 0/8 02217N 0904, 0436, 0437 Brass, dipped 0.312 0/8 2223N 906 Steel, zinc plated 0.375 0/10 02223N 0906 Brass, dipped 0.375 0/10 43

PADLOCKS Pin Tumbler 906 SERIES PADLOCKS Keyways Available: AR, BR & WR Number of Pin Tumblers: 5 Regular Key Changes: All different Masterkeying: Available when specified on order. Chain: Available with 9" chain. Steel shackle with 2223N chain assembly. Brass shackle with 02223N chain assembly. Specify on order using suffix "C" (e.g., 906C). Special Stamping: Available with case stamped to customer requirements when specified on order. Unassembled padlocks available in this series. 11/32 13/16 A 1 19 /32 23/32 1 3 /4 Key Appox. Material Shackle Blank Part No/Cyl Length Stock ID No. MKYD Case Shackle Clearance No. Qty. (lbs./ oz.) 906 US4 KD 02112 Solid brass, Hardened 13/16" 4193C 10 7/4 wheel finish steel, chrome plated 906 US4 KA - 2A36485 00140 Solid brass, Hardened 13/16" 4193C 10 7/4 wheel finish steel, chrome plated 906 Solid brass, Hardened 13/16" 4193C wheel finish steel, chrome plated 0906 Solid brass, Solid brass 13/16" 4193C wheel finish 906S Solid brass, Hardened 1 1/4" 4193C wheel finish steel, chrome plated 0906S Solid brass, Solid brass 1 1/4" 4193C wheel finish 906W Solid brass, Hardened 1 3/4" 4193C wheel finish steel, chrome plated 0906W Solid brass, Solid brass 1 3/4" 4193C wheel finish 906H Solid brass, Hardened 2 1/2" 4193C wheel finish steel, chrome plated 0906H Solid brass, Solid brass 2 1/2" 4193C wheel finish 0906L Solid brass, Solid brass 1 1/2 4193C wheel finish 44 CCL SECURITY PRODUCTS 800-733-8588 Fax: 847-537-1881 www.cclsecurity.com

KEYLESS COMBINATION CAM LOCK CK2113, CK3113, CK4113 Materials and Finishes: Vault Knob: Die-cast zinc; zinc and yellow chromate-finished, then black polyurethane painted, plus over painted white numbers Shell: Die-cast zinc; polished plus copper and nickel-plated Cylinder & Mounting Nut: Die-cast zinc; zinc and clear chromatefinished Combination Discs: Carbon steel; case-hardened and nickel-plated MOUNTING CUTOUT CK2113 CK3113 CK4113 Distance Under Distance Under Distance Under Cam Length Head to Cam Head to Cam Head to Cam No. Cam A B B 1 B 0 B B 1 B 0 B B 1 B 0 CFL1500 1 1 2" 5 8" 7 8" 1 1 8" COF2500 1 1 4" 3 8" 7 8" 5 8" 1 1 8" 7 8" 1 3 8".630.635.760.765 DIA. Standard Cutouts same as for Disc Tumblers Cam Locks Part No/Cyl Length Stock ID No. US14 Qty. (lbs./ oz.) CK2113 CD, Carded 03211 10 2/2 CK2113 CA, Carded 03230 10 2/2 CK3113 CD, Carded 03212 10 2/4 CK3113 CA, Carded 03231 10 2/4 CK4113 CD, Carded 03213 10 2/6 CK4113 CA, Carded 03232 10 2/6 KEYING KITS Stock Stock Part No/Cyl Length ID No. Description Qty. C050150 03233 Tech Lock Recombinating Kit 1 0 B1 B B 1 B1 0 B B 1 B1 0 B B 1 1 A 1 A 1 A 3/4 3/4 5/8 CYLINDER LENGTH 7/8 7/8 CYLINDER LENGTH 1 1 /8 3/4 1 1 /8 CYLINDER LENGTH 1 3 /8 No. CK2113 No. CK3113 No. CK4113 New Packaging Accessories Furnished with Combination Cam Locks: Screw Lockwasher COF2500 1/4 Offset Cam CFL1500 Straight Cam 90 Stop Cam 3/4 Cylinder Nut Pronged Washer Collar Ring Notes: Stock items are not shaded and are available in stock quantity units only. Use Stock ID No. when ordering stock items. Made - To - Order items are shaded. For explanation of finishing symbols, refer to Page 2. 45

KEYING KITS & PARTS KEYING KITS FOR CABINET LOCKS CONTENTS: Service Tumblers Master Tumblers Cams Lock Retainers Cylinder Nuts Pronged Washers Escutcheons Plug Nuts Stop Cams Tumbler Springs Lock Washers NO. KK125 DISC TUMBLER KEYING KIT For rekeying CCL s 4T, B4R, and 4R type bitting requiring.095 diameter pins, and OLYMPUS D4219 keyway in.101 diameter pins. NOTE: CCL s 4T and B4R have the same bitting. CONTENTS: 100 Bottom Pins, size 0-8 ( 4R type) 100 Bottom Pins, size 0-9 ( B4R type) 100 Bottom Pins, size 0-9 (D4219 Keyway) 100 Master Pins, size 2-9 ( 4R & B4R type) 100 Master Pins, size 2-7 (D4219 Keyway) 100 Top Pins, size 0 & 5 ( 4R type) 100 Top Pins, size 1-4 (D4219 Keyway) 100 Tumbler Springs.095 diameter 100 Tumbler Springs.101 diameter 1 Tweezer 1 Follower NO. OLYMP-1 PIN TUMBLER KEYING KIT KEYING KITS Stock Stock Part No/Cyl Length Description ID No. Qty. OLYMP-1 Pin Tumbler Keying Kit 03153 1 KK125 Disc Tumbler Keying Kit 00569 1 PARTS FOR DISC TUMBLERS Part No. Description #0 thru #2 Service Disc #0-1 thru #2-1 Master Disc C-2065 Spring for Disc Tumblers * Only supplied in quantities of 100 PARTS FOR PIN TUMBLERS Part No. Description #0 thru #8 Ball End Pin Tumbler for "4R" type Bitting #2 thru #8 Master Pin Tumbler for "4R" type Bitting #0 thru #9 Ball End Pin Tumbler for "4T" & "B4R" type Bitting #2 thru #9 Ball End Pin Tumbler for "4T" & "B4R" type Bitting #0 thru #5 Driver for "4T", "B4R", "4R" type Bitting 026F757 Tumbler Spring 0665-3/4" Cylinder Slide 0665-7/8" Cylinder Slide 0665-1 1/16" Cylinder Slide * Only supplied in quantities of 100 46 CCL SECURITY PRODUCTS 800-733-8588 Fax: 847-537-1881 www.cclsecurity.com